xref: /openbmc/linux/drivers/iio/light/Kconfig (revision ba61bb17)
1#
2# Light sensors
3#
4# When adding new entries keep the list in alphabetical order
5
6menu "Light sensors"
7
8config ACPI_ALS
9	tristate "ACPI Ambient Light Sensor"
10	depends on ACPI
11	select IIO_BUFFER
12	select IIO_TRIGGERED_BUFFER
13	select IIO_KFIFO_BUF
14	help
15	 Say Y here if you want to build a driver for the ACPI0008
16	 Ambient Light Sensor.
17
18	 To compile this driver as a module, choose M here: the module will
19	 be called acpi-als.
20
21config ADJD_S311
22	tristate "ADJD-S311-CR999 digital color sensor"
23	select IIO_BUFFER
24	select IIO_TRIGGERED_BUFFER
25	depends on I2C
26	help
27	 If you say yes here you get support for the Avago ADJD-S311-CR999
28	 digital color light sensor.
29
30	 This driver can also be built as a module.  If so, the module
31	 will be called adjd_s311.
32
33config AL3320A
34	tristate "AL3320A ambient light sensor"
35	depends on I2C
36	help
37	 Say Y here if you want to build a driver for the Dyna Image AL3320A
38	 ambient light sensor.
39
40	 To compile this driver as a module, choose M here: the
41	 module will be called al3320a.
42
43config APDS9300
44	tristate "APDS9300 ambient light sensor"
45	depends on I2C
46	help
47	 Say Y here if you want to build a driver for the Avago APDS9300
48	 ambient light sensor.
49
50	 To compile this driver as a module, choose M here: the
51	 module will be called apds9300.
52
53config APDS9960
54	tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
55	select REGMAP_I2C
56	select IIO_BUFFER
57	select IIO_KFIFO_BUF
58	depends on I2C
59	help
60	  Say Y here to build I2C interface support for the Avago
61	  APDS9960 gesture/RGB/ALS/proximity sensor.
62
63	  To compile this driver as a module, choose M here: the
64	  module will be called apds9960
65
66config BH1750
67	tristate "ROHM BH1750 ambient light sensor"
68	depends on I2C
69	help
70	 Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
71	 BH1750, BH1751 ambient light sensors.
72
73	 To compile this driver as a module, choose M here: the module will
74	 be called bh1750.
75
76config BH1780
77	tristate "ROHM BH1780 ambient light sensor"
78	depends on I2C
79	help
80	 Say Y here to build support for the ROHM BH1780GLI ambient
81	 light sensor.
82
83	 To compile this driver as a module, choose M here: the module will
84	 be called bh1780.
85
86config CM32181
87	depends on I2C
88	tristate "CM32181 driver"
89	help
90	 Say Y here if you use cm32181.
91	 This option enables ambient light sensor using
92	 Capella cm32181 device driver.
93
94	 To compile this driver as a module, choose M here:
95	 the module will be called cm32181.
96
97config CM3232
98	depends on I2C
99	tristate "CM3232 ambient light sensor"
100	help
101	 Say Y here if you use cm3232.
102	 This option enables ambient light sensor using
103	 Capella Microsystems cm3232 device driver.
104
105	 To compile this driver as a module, choose M here:
106	 the module will be called cm3232.
107
108config CM3323
109	depends on I2C
110	tristate "Capella CM3323 color light sensor"
111	help
112	 Say Y here if you want to build a driver for Capella CM3323
113	 color sensor.
114
115	 To compile this driver as a module, choose M here: the module will
116	 be called cm3323.
117
118config CM3605
119	tristate "Capella CM3605 ambient light and proximity sensor"
120	depends on OF
121	help
122	 Say Y here if you want to build a driver for Capella CM3605
123	 ambient light and short range proximity sensor.
124
125	 To compile this driver as a module, choose M here: the module will
126	 be called cm3605.
127
128config CM36651
129	depends on I2C
130	tristate "CM36651 driver"
131	help
132	 Say Y here if you use cm36651.
133	 This option enables proximity & RGB sensor using
134	 Capella cm36651 device driver.
135
136	 To compile this driver as a module, choose M here:
137	 the module will be called cm36651.
138
139config IIO_CROS_EC_LIGHT_PROX
140	tristate "ChromeOS EC Light and Proximity Sensors"
141	depends on IIO_CROS_EC_SENSORS_CORE
142	help
143	  Say Y here if you use the light and proximity sensors
144	  presented by the ChromeOS EC Sensor hub.
145
146	  To compile this driver as a module, choose M here:
147	  the module will be called cros_ec_light_prox.
148
149config GP2AP020A00F
150	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
151	depends on I2C
152	select REGMAP_I2C
153	select IIO_BUFFER
154	select IIO_TRIGGERED_BUFFER
155	select IRQ_WORK
156	help
157	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
158	  hooked to an I2C bus.
159
160	  To compile this driver as a module, choose M here: the
161	  module will be called gp2ap020a00f.
162
163config SENSORS_ISL29018
164	tristate "Intersil 29018 light and proximity sensor"
165	depends on I2C
166	select REGMAP_I2C
167	default n
168	help
169	 If you say yes here you get support for ambient light sensing and
170	 proximity infrared sensing from Intersil ISL29018.
171	 This driver will provide the measurements of ambient light intensity
172	 in lux, proximity infrared sensing and normal infrared sensing.
173	 Data from sensor is accessible via sysfs.
174
175config SENSORS_ISL29028
176	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
177	depends on I2C
178	select REGMAP_I2C
179	help
180	 Provides driver for the Intersil's ISL29028 device.
181	 This driver supports the sysfs interface to get the ALS, IR intensity,
182	 Proximity value via iio. The ISL29028 provides the concurrent sensing
183	 of ambient light and proximity.
184
185config ISL29125
186	tristate "Intersil ISL29125 digital color light sensor"
187	depends on I2C
188	select IIO_BUFFER
189	select IIO_TRIGGERED_BUFFER
190	help
191	  Say Y here if you want to build a driver for the Intersil ISL29125
192	  RGB light sensor for I2C.
193
194	  To compile this driver as a module, choose M here: the module will be
195	  called isl29125.
196
197config HID_SENSOR_ALS
198	depends on HID_SENSOR_HUB
199	select IIO_BUFFER
200	select IIO_TRIGGERED_BUFFER
201	select HID_SENSOR_IIO_COMMON
202	select HID_SENSOR_IIO_TRIGGER
203	tristate "HID ALS"
204	help
205	  Say yes here to build support for the HID SENSOR
206	  Ambient light sensor.
207
208	  To compile this driver as a module, choose M here: the
209	  module will be called hid-sensor-als.
210
211config HID_SENSOR_PROX
212	depends on HID_SENSOR_HUB
213	select IIO_BUFFER
214	select IIO_TRIGGERED_BUFFER
215	select HID_SENSOR_IIO_COMMON
216	select HID_SENSOR_IIO_TRIGGER
217	tristate "HID PROX"
218	help
219	  Say yes here to build support for the HID SENSOR
220	  Proximity sensor.
221
222	  To compile this driver as a module, choose M here: the
223	  module will be called hid-sensor-prox.
224
225config JSA1212
226	tristate "JSA1212 ALS and proximity sensor driver"
227	depends on I2C
228	select REGMAP_I2C
229	help
230	 Say Y here if you want to build a IIO driver for JSA1212
231	 proximity & ALS sensor device.
232
233	 To compile this driver as a module, choose M here:
234	 the module will be called jsa1212.
235
236config RPR0521
237	tristate "ROHM RPR0521 ALS and proximity sensor driver"
238	depends on I2C
239	select REGMAP_I2C
240	help
241	 Say Y here if you want to build support for ROHM's RPR0521
242	 ambient light and proximity sensor device.
243
244	 To compile this driver as a module, choose M here:
245	 the module will be called rpr0521.
246
247config SENSORS_LM3533
248	tristate "LM3533 ambient light sensor"
249	depends on MFD_LM3533
250	help
251	  If you say yes here you get support for the ambient light sensor
252	  interface on National Semiconductor / TI LM3533 Lighting Power
253	  chips.
254
255	  The sensor interface can be used to control the LEDs and backlights
256	  of the chip through defining five light zones and three sets of
257	  corresponding output-current values.
258
259	  The driver provides raw and mean adc readings along with the current
260	  light zone through sysfs. A threshold event can be generated on zone
261	  changes. The ALS-control output values can be set per zone for the
262	  three current output channels.
263
264config LTR501
265	tristate "LTR-501ALS-01 light sensor"
266	depends on I2C
267	select REGMAP_I2C
268	select IIO_BUFFER
269	select IIO_TRIGGERED_BUFFER
270	help
271	 If you say yes here you get support for the Lite-On LTR-501ALS-01
272	 ambient light and proximity sensor. This driver also supports LTR-559
273	 ALS/PS or LTR-301 ALS sensors.
274
275	 This driver can also be built as a module.  If so, the module
276         will be called ltr501.
277
278config LV0104CS
279	tristate "LV0104CS Ambient Light Sensor"
280	depends on I2C
281	help
282	 Say Y here if you want to build support for the On Semiconductor
283	 LV0104CS ambient light sensor.
284
285	 To compile this driver as a module, choose M here:
286	 the module will be called lv0104cs.
287
288config MAX44000
289	tristate "MAX44000 Ambient and Infrared Proximity Sensor"
290	depends on I2C
291	select REGMAP_I2C
292	select IIO_BUFFER
293	select IIO_TRIGGERED_BUFFER
294	help
295	 Say Y here if you want to build support for Maxim Integrated's
296	 MAX44000 ambient and infrared proximity sensor device.
297
298	 To compile this driver as a module, choose M here:
299	 the module will be called max44000.
300
301config OPT3001
302	tristate "Texas Instruments OPT3001 Light Sensor"
303	depends on I2C
304	help
305	  If you say Y or M here, you get support for Texas Instruments
306	  OPT3001 Ambient Light Sensor.
307
308	  If built as a dynamically linked module, it will be called
309	  opt3001.
310
311config PA12203001
312        tristate "TXC PA12203001 light and proximity sensor"
313        depends on I2C
314        select REGMAP_I2C
315        help
316         If you say yes here you get support for the TXC PA12203001
317         ambient light and proximity sensor.
318
319         This driver can also be built as a module.  If so, the module
320         will be called pa12203001.
321
322config SI1145
323	tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
324	depends on I2C
325	select IIO_BUFFER
326	select IIO_TRIGGERED_BUFFER
327	help
328	  Say Y here if you want to build a driver for the Silicon Labs SI1132 or
329	  SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
330	  chips.
331
332	  To compile this driver as a module, choose M here: the module will be
333	  called si1145.
334
335config STK3310
336	tristate "STK3310 ALS and proximity sensor"
337	depends on I2C
338	select REGMAP_I2C
339	help
340	 Say yes here to get support for the Sensortek STK3310 ambient light
341	 and proximity sensor. The STK3311 model is also supported by this
342	 driver.
343
344	 Choosing M will build the driver as a module. If so, the module
345	 will be called stk3310.
346
347config ST_UVIS25
348	tristate "STMicroelectronics UVIS25 sensor driver"
349	depends on (I2C || SPI)
350	select IIO_BUFFER
351	select IIO_TRIGGERED_BUFFER
352	select ST_UVIS25_I2C if (I2C)
353	select ST_UVIS25_SPI if (SPI_MASTER)
354	help
355	  Say yes here to build support for STMicroelectronics UVIS25
356	  uv sensor
357
358	  To compile this driver as a module, choose M here: the module
359	  will be called st_uvis25.
360
361config ST_UVIS25_I2C
362	tristate
363	depends on ST_UVIS25
364	select REGMAP_I2C
365
366config ST_UVIS25_SPI
367	tristate
368	depends on ST_UVIS25
369	select REGMAP_SPI
370
371config TCS3414
372	tristate "TAOS TCS3414 digital color sensor"
373	depends on I2C
374	select IIO_BUFFER
375	select IIO_TRIGGERED_BUFFER
376	help
377	 If you say yes here you get support for the TAOS TCS3414
378	 family of digital color sensors.
379
380	 This driver can also be built as a module.  If so, the module
381	 will be called tcs3414.
382
383config TCS3472
384	tristate "TAOS TCS3472 color light-to-digital converter"
385	depends on I2C
386	select IIO_BUFFER
387	select IIO_TRIGGERED_BUFFER
388	help
389	 If you say yes here you get support for the TAOS TCS3472
390	 family of color light-to-digital converters with IR filter.
391
392	 This driver can also be built as a module.  If so, the module
393	 will be called tcs3472.
394
395config SENSORS_TSL2563
396	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
397	depends on I2C
398	help
399	 If you say yes here you get support for the Taos TSL2560,
400	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
401
402	 This driver can also be built as a module.  If so, the module
403	 will be called tsl2563.
404
405config TSL2583
406	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
407	depends on I2C
408	help
409	 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
410	 Access ALS data via iio, sysfs.
411
412config TSL2772
413	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
414	depends on I2C
415	help
416	 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
417	 tmd2672, tsl2772, tmd2772 devices.
418	 Provides iio_events and direct access via sysfs.
419
420config TSL4531
421	tristate "TAOS TSL4531 ambient light sensors"
422	depends on I2C
423	help
424	 Say Y here if you want to build a driver for the TAOS TSL4531 family
425	 of ambient light sensors with direct lux output.
426
427	 To compile this driver as a module, choose M here: the
428	 module will be called tsl4531.
429
430config US5182D
431	tristate "UPISEMI light and proximity sensor"
432	depends on I2C
433	help
434	 If you say yes here you get support for the UPISEMI US5182D
435	 ambient light and proximity sensor.
436
437	 This driver can also be built as a module.  If so, the module
438	 will be called us5182d.
439
440config VCNL4000
441	tristate "VCNL4000/4010/4020 combined ALS and proximity sensor"
442	depends on I2C
443	help
444	 Say Y here if you want to build a driver for the Vishay VCNL4000,
445	 VCNL4010, VCNL4020 combined ambient light and proximity sensor.
446
447	 To compile this driver as a module, choose M here: the
448	 module will be called vcnl4000.
449
450config VEML6070
451	tristate "VEML6070 UV A light sensor"
452	depends on I2C
453	help
454	 Say Y here if you want to build a driver for the Vishay VEML6070 UV A
455	 light sensor.
456
457	 To compile this driver as a module, choose M here: the
458	 module will be called veml6070.
459
460config VL6180
461	tristate "VL6180 ALS, range and proximity sensor"
462	depends on I2C
463	help
464	 Say Y here if you want to build a driver for the STMicroelectronics
465	 VL6180 combined ambient light, range and proximity sensor.
466
467	 To compile this driver as a module, choose M here: the
468	 module will be called vl6180.
469
470config ZOPT2201
471	tristate "ZOPT2201 ALS and UV B sensor"
472	depends on I2C
473	help
474	 Say Y here if you want to build a driver for the IDT
475	 ZOPT2201 ambient light and UV B sensor.
476
477	 To compile this driver as a module, choose M here: the
478	 module will be called zopt2201.
479
480endmenu
481