1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config AL3320A 36 tristate "AL3320A ambient light sensor" 37 depends on I2C 38 help 39 Say Y here if you want to build a driver for the Dyna Image AL3320A 40 ambient light sensor. 41 42 To compile this driver as a module, choose M here: the 43 module will be called al3320a. 44 45config APDS9300 46 tristate "APDS9300 ambient light sensor" 47 depends on I2C 48 help 49 Say Y here if you want to build a driver for the Avago APDS9300 50 ambient light sensor. 51 52 To compile this driver as a module, choose M here: the 53 module will be called apds9300. 54 55config APDS9960 56 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 57 select REGMAP_I2C 58 select IIO_BUFFER 59 select IIO_KFIFO_BUF 60 depends on I2C 61 help 62 Say Y here to build I2C interface support for the Avago 63 APDS9960 gesture/RGB/ALS/proximity sensor. 64 65 To compile this driver as a module, choose M here: the 66 module will be called apds9960 67 68config BH1750 69 tristate "ROHM BH1750 ambient light sensor" 70 depends on I2C 71 help 72 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 73 BH1750, BH1751 ambient light sensors. 74 75 To compile this driver as a module, choose M here: the module will 76 be called bh1750. 77 78config BH1780 79 tristate "ROHM BH1780 ambient light sensor" 80 depends on I2C 81 help 82 Say Y here to build support for the ROHM BH1780GLI ambient 83 light sensor. 84 85 To compile this driver as a module, choose M here: the module will 86 be called bh1780. 87 88config CM32181 89 depends on I2C 90 tristate "CM32181 driver" 91 help 92 Say Y here if you use cm32181. 93 This option enables ambient light sensor using 94 Capella cm32181 device driver. 95 96 To compile this driver as a module, choose M here: 97 the module will be called cm32181. 98 99config CM3232 100 depends on I2C 101 tristate "CM3232 ambient light sensor" 102 help 103 Say Y here if you use cm3232. 104 This option enables ambient light sensor using 105 Capella Microsystems cm3232 device driver. 106 107 To compile this driver as a module, choose M here: 108 the module will be called cm3232. 109 110config CM3323 111 depends on I2C 112 tristate "Capella CM3323 color light sensor" 113 help 114 Say Y here if you want to build a driver for Capella CM3323 115 color sensor. 116 117 To compile this driver as a module, choose M here: the module will 118 be called cm3323. 119 120config CM3605 121 tristate "Capella CM3605 ambient light and proximity sensor" 122 depends on OF 123 help 124 Say Y here if you want to build a driver for Capella CM3605 125 ambient light and short range proximity sensor. 126 127 To compile this driver as a module, choose M here: the module will 128 be called cm3605. 129 130config CM36651 131 depends on I2C 132 tristate "CM36651 driver" 133 help 134 Say Y here if you use cm36651. 135 This option enables proximity & RGB sensor using 136 Capella cm36651 device driver. 137 138 To compile this driver as a module, choose M here: 139 the module will be called cm36651. 140 141config IIO_CROS_EC_LIGHT_PROX 142 tristate "ChromeOS EC Light and Proximity Sensors" 143 depends on IIO_CROS_EC_SENSORS_CORE 144 help 145 Say Y here if you use the light and proximity sensors 146 presented by the ChromeOS EC Sensor hub. 147 148 To compile this driver as a module, choose M here: 149 the module will be called cros_ec_light_prox. 150 151config GP2AP020A00F 152 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 153 depends on I2C 154 select REGMAP_I2C 155 select IIO_BUFFER 156 select IIO_TRIGGERED_BUFFER 157 select IRQ_WORK 158 help 159 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 160 hooked to an I2C bus. 161 162 To compile this driver as a module, choose M here: the 163 module will be called gp2ap020a00f. 164 165config SENSORS_ISL29018 166 tristate "Intersil 29018 light and proximity sensor" 167 depends on I2C 168 select REGMAP_I2C 169 default n 170 help 171 If you say yes here you get support for ambient light sensing and 172 proximity infrared sensing from Intersil ISL29018. 173 This driver will provide the measurements of ambient light intensity 174 in lux, proximity infrared sensing and normal infrared sensing. 175 Data from sensor is accessible via sysfs. 176 177config SENSORS_ISL29028 178 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 179 depends on I2C 180 select REGMAP_I2C 181 help 182 Provides driver for the Intersil's ISL29028 device. 183 This driver supports the sysfs interface to get the ALS, IR intensity, 184 Proximity value via iio. The ISL29028 provides the concurrent sensing 185 of ambient light and proximity. 186 187config ISL29125 188 tristate "Intersil ISL29125 digital color light sensor" 189 depends on I2C 190 select IIO_BUFFER 191 select IIO_TRIGGERED_BUFFER 192 help 193 Say Y here if you want to build a driver for the Intersil ISL29125 194 RGB light sensor for I2C. 195 196 To compile this driver as a module, choose M here: the module will be 197 called isl29125. 198 199config HID_SENSOR_ALS 200 depends on HID_SENSOR_HUB 201 select IIO_BUFFER 202 select IIO_TRIGGERED_BUFFER 203 select HID_SENSOR_IIO_COMMON 204 select HID_SENSOR_IIO_TRIGGER 205 tristate "HID ALS" 206 help 207 Say yes here to build support for the HID SENSOR 208 Ambient light sensor. 209 210 To compile this driver as a module, choose M here: the 211 module will be called hid-sensor-als. 212 213config HID_SENSOR_PROX 214 depends on HID_SENSOR_HUB 215 select IIO_BUFFER 216 select IIO_TRIGGERED_BUFFER 217 select HID_SENSOR_IIO_COMMON 218 select HID_SENSOR_IIO_TRIGGER 219 tristate "HID PROX" 220 help 221 Say yes here to build support for the HID SENSOR 222 Proximity sensor. 223 224 To compile this driver as a module, choose M here: the 225 module will be called hid-sensor-prox. 226 227config JSA1212 228 tristate "JSA1212 ALS and proximity sensor driver" 229 depends on I2C 230 select REGMAP_I2C 231 help 232 Say Y here if you want to build a IIO driver for JSA1212 233 proximity & ALS sensor device. 234 235 To compile this driver as a module, choose M here: 236 the module will be called jsa1212. 237 238config RPR0521 239 tristate "ROHM RPR0521 ALS and proximity sensor driver" 240 depends on I2C 241 select REGMAP_I2C 242 help 243 Say Y here if you want to build support for ROHM's RPR0521 244 ambient light and proximity sensor device. 245 246 To compile this driver as a module, choose M here: 247 the module will be called rpr0521. 248 249config SENSORS_LM3533 250 tristate "LM3533 ambient light sensor" 251 depends on MFD_LM3533 252 help 253 If you say yes here you get support for the ambient light sensor 254 interface on National Semiconductor / TI LM3533 Lighting Power 255 chips. 256 257 The sensor interface can be used to control the LEDs and backlights 258 of the chip through defining five light zones and three sets of 259 corresponding output-current values. 260 261 The driver provides raw and mean adc readings along with the current 262 light zone through sysfs. A threshold event can be generated on zone 263 changes. The ALS-control output values can be set per zone for the 264 three current output channels. 265 266config LTR501 267 tristate "LTR-501ALS-01 light sensor" 268 depends on I2C 269 select REGMAP_I2C 270 select IIO_BUFFER 271 select IIO_TRIGGERED_BUFFER 272 help 273 If you say yes here you get support for the Lite-On LTR-501ALS-01 274 ambient light and proximity sensor. This driver also supports LTR-559 275 ALS/PS or LTR-301 ALS sensors. 276 277 This driver can also be built as a module. If so, the module 278 will be called ltr501. 279 280config LV0104CS 281 tristate "LV0104CS Ambient Light Sensor" 282 depends on I2C 283 help 284 Say Y here if you want to build support for the On Semiconductor 285 LV0104CS ambient light sensor. 286 287 To compile this driver as a module, choose M here: 288 the module will be called lv0104cs. 289 290config MAX44000 291 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 292 depends on I2C 293 select REGMAP_I2C 294 select IIO_BUFFER 295 select IIO_TRIGGERED_BUFFER 296 help 297 Say Y here if you want to build support for Maxim Integrated's 298 MAX44000 ambient and infrared proximity sensor device. 299 300 To compile this driver as a module, choose M here: 301 the module will be called max44000. 302 303config MAX44009 304 tristate "MAX44009 Ambient Light Sensor" 305 depends on I2C 306 help 307 Say Y here if you want to build support for Maxim Integrated's 308 MAX44009 ambient light sensor device. 309 310 To compile this driver as a module, choose M here: 311 the module will be called max44009. 312 313config OPT3001 314 tristate "Texas Instruments OPT3001 Light Sensor" 315 depends on I2C 316 help 317 If you say Y or M here, you get support for Texas Instruments 318 OPT3001 Ambient Light Sensor. 319 320 If built as a dynamically linked module, it will be called 321 opt3001. 322 323config PA12203001 324 tristate "TXC PA12203001 light and proximity sensor" 325 depends on I2C 326 select REGMAP_I2C 327 help 328 If you say yes here you get support for the TXC PA12203001 329 ambient light and proximity sensor. 330 331 This driver can also be built as a module. If so, the module 332 will be called pa12203001. 333 334config SI1133 335 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 336 depends on I2C 337 select REGMAP_I2C 338 help 339 Say Y here if you want to build a driver for the Silicon Labs SI1133 340 UV Index Sensor and Ambient Light Sensor chip. 341 342 To compile this driver as a module, choose M here: the module will be 343 called si1133. 344 345config SI1145 346 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 347 depends on I2C 348 select IIO_BUFFER 349 select IIO_TRIGGERED_BUFFER 350 help 351 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 352 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 353 chips. 354 355 To compile this driver as a module, choose M here: the module will be 356 called si1145. 357 358config STK3310 359 tristate "STK3310 ALS and proximity sensor" 360 depends on I2C 361 select REGMAP_I2C 362 help 363 Say yes here to get support for the Sensortek STK3310 ambient light 364 and proximity sensor. The STK3311 model is also supported by this 365 driver. 366 367 Choosing M will build the driver as a module. If so, the module 368 will be called stk3310. 369 370config ST_UVIS25 371 tristate "STMicroelectronics UVIS25 sensor driver" 372 depends on (I2C || SPI) 373 select IIO_BUFFER 374 select IIO_TRIGGERED_BUFFER 375 select ST_UVIS25_I2C if (I2C) 376 select ST_UVIS25_SPI if (SPI_MASTER) 377 help 378 Say yes here to build support for STMicroelectronics UVIS25 379 uv sensor 380 381 To compile this driver as a module, choose M here: the module 382 will be called st_uvis25. 383 384config ST_UVIS25_I2C 385 tristate 386 depends on ST_UVIS25 387 select REGMAP_I2C 388 389config ST_UVIS25_SPI 390 tristate 391 depends on ST_UVIS25 392 select REGMAP_SPI 393 394config TCS3414 395 tristate "TAOS TCS3414 digital color sensor" 396 depends on I2C 397 select IIO_BUFFER 398 select IIO_TRIGGERED_BUFFER 399 help 400 If you say yes here you get support for the TAOS TCS3414 401 family of digital color sensors. 402 403 This driver can also be built as a module. If so, the module 404 will be called tcs3414. 405 406config TCS3472 407 tristate "TAOS TCS3472 color light-to-digital converter" 408 depends on I2C 409 select IIO_BUFFER 410 select IIO_TRIGGERED_BUFFER 411 help 412 If you say yes here you get support for the TAOS TCS3472 413 family of color light-to-digital converters with IR filter. 414 415 This driver can also be built as a module. If so, the module 416 will be called tcs3472. 417 418config SENSORS_TSL2563 419 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 420 depends on I2C 421 help 422 If you say yes here you get support for the Taos TSL2560, 423 TSL2561, TSL2562 and TSL2563 ambient light sensors. 424 425 This driver can also be built as a module. If so, the module 426 will be called tsl2563. 427 428config TSL2583 429 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 430 depends on I2C 431 help 432 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 433 Access ALS data via iio, sysfs. 434 435config TSL2772 436 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 437 depends on I2C 438 help 439 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 440 tmd2672, tsl2772, tmd2772 devices. 441 Provides iio_events and direct access via sysfs. 442 443config TSL4531 444 tristate "TAOS TSL4531 ambient light sensors" 445 depends on I2C 446 help 447 Say Y here if you want to build a driver for the TAOS TSL4531 family 448 of ambient light sensors with direct lux output. 449 450 To compile this driver as a module, choose M here: the 451 module will be called tsl4531. 452 453config US5182D 454 tristate "UPISEMI light and proximity sensor" 455 depends on I2C 456 help 457 If you say yes here you get support for the UPISEMI US5182D 458 ambient light and proximity sensor. 459 460 This driver can also be built as a module. If so, the module 461 will be called us5182d. 462 463config VCNL4000 464 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 465 depends on I2C 466 help 467 Say Y here if you want to build a driver for the Vishay VCNL4000, 468 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 469 sensor. 470 471 To compile this driver as a module, choose M here: the 472 module will be called vcnl4000. 473 474config VCNL4035 475 tristate "VCNL4035 combined ALS and proximity sensor" 476 select IIO_TRIGGERED_BUFFER 477 select REGMAP_I2C 478 depends on I2C 479 help 480 Say Y here if you want to build a driver for the Vishay VCNL4035, 481 combined ambient light (ALS) and proximity sensor. Currently only ALS 482 function is available. 483 484 To compile this driver as a module, choose M here: the 485 module will be called vcnl4035. 486 487config VEML6070 488 tristate "VEML6070 UV A light sensor" 489 depends on I2C 490 help 491 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 492 light sensor. 493 494 To compile this driver as a module, choose M here: the 495 module will be called veml6070. 496 497config VL6180 498 tristate "VL6180 ALS, range and proximity sensor" 499 depends on I2C 500 help 501 Say Y here if you want to build a driver for the STMicroelectronics 502 VL6180 combined ambient light, range and proximity sensor. 503 504 To compile this driver as a module, choose M here: the 505 module will be called vl6180. 506 507config ZOPT2201 508 tristate "ZOPT2201 ALS and UV B sensor" 509 depends on I2C 510 help 511 Say Y here if you want to build a driver for the IDT 512 ZOPT2201 ambient light and UV B sensor. 513 514 To compile this driver as a module, choose M here: the 515 module will be called zopt2201. 516 517endmenu 518