1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config ADUX1020 36 tristate "ADUX1020 photometric sensor" 37 select REGMAP_I2C 38 depends on I2C 39 help 40 Say Y here if you want to build a driver for the Analog Devices 41 ADUX1020 photometric sensor. 42 43 To compile this driver as a module, choose M here: the 44 module will be called adux1020. 45 46config AL3010 47 tristate "AL3010 ambient light sensor" 48 depends on I2C 49 help 50 Say Y here if you want to build a driver for the Dyna Image AL3010 51 ambient light sensor. 52 53 To compile this driver as a module, choose M here: the 54 module will be called al3010. 55 56config AL3320A 57 tristate "AL3320A ambient light sensor" 58 depends on I2C 59 help 60 Say Y here if you want to build a driver for the Dyna Image AL3320A 61 ambient light sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called al3320a. 65 66config APDS9300 67 tristate "APDS9300 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here if you want to build a driver for the Avago APDS9300 71 ambient light sensor. 72 73 To compile this driver as a module, choose M here: the 74 module will be called apds9300. 75 76config APDS9960 77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 78 select REGMAP_I2C 79 select IIO_BUFFER 80 select IIO_KFIFO_BUF 81 depends on I2C 82 help 83 Say Y here to build I2C interface support for the Avago 84 APDS9960 gesture/RGB/ALS/proximity sensor. 85 86 To compile this driver as a module, choose M here: the 87 module will be called apds9960 88 89config AS73211 90 tristate "AMS AS73211 XYZ color sensor" 91 depends on I2C 92 select IIO_BUFFER 93 select IIO_TRIGGERED_BUFFER 94 help 95 If you say yes here you get support for the AMS AS73211 96 JENCOLOR(R) Digital XYZ Sensor. 97 98 For triggered measurements, you will need an additional trigger driver 99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. 100 101 This driver can also be built as a module. If so, the module 102 will be called as73211. 103 104config BH1750 105 tristate "ROHM BH1750 ambient light sensor" 106 depends on I2C 107 help 108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 109 BH1750, BH1751 ambient light sensors. 110 111 To compile this driver as a module, choose M here: the module will 112 be called bh1750. 113 114config BH1780 115 tristate "ROHM BH1780 ambient light sensor" 116 depends on I2C 117 help 118 Say Y here to build support for the ROHM BH1780GLI ambient 119 light sensor. 120 121 To compile this driver as a module, choose M here: the module will 122 be called bh1780. 123 124config CM32181 125 depends on I2C 126 tristate "CM32181 driver" 127 help 128 Say Y here if you use cm32181. 129 This option enables ambient light sensor using 130 Capella cm32181 device driver. 131 132 To compile this driver as a module, choose M here: 133 the module will be called cm32181. 134 135config CM3232 136 depends on I2C 137 tristate "CM3232 ambient light sensor" 138 help 139 Say Y here if you use cm3232. 140 This option enables ambient light sensor using 141 Capella Microsystems cm3232 device driver. 142 143 To compile this driver as a module, choose M here: 144 the module will be called cm3232. 145 146config CM3323 147 depends on I2C 148 tristate "Capella CM3323 color light sensor" 149 help 150 Say Y here if you want to build a driver for Capella CM3323 151 color sensor. 152 153 To compile this driver as a module, choose M here: the module will 154 be called cm3323. 155 156config CM3605 157 tristate "Capella CM3605 ambient light and proximity sensor" 158 help 159 Say Y here if you want to build a driver for Capella CM3605 160 ambient light and short range proximity sensor. 161 162 To compile this driver as a module, choose M here: the module will 163 be called cm3605. 164 165config CM36651 166 depends on I2C 167 tristate "CM36651 driver" 168 help 169 Say Y here if you use cm36651. 170 This option enables proximity & RGB sensor using 171 Capella cm36651 device driver. 172 173 To compile this driver as a module, choose M here: 174 the module will be called cm36651. 175 176config IIO_CROS_EC_LIGHT_PROX 177 tristate "ChromeOS EC Light and Proximity Sensors" 178 depends on IIO_CROS_EC_SENSORS_CORE 179 help 180 Say Y here if you use the light and proximity sensors 181 presented by the ChromeOS EC Sensor hub. 182 183 To compile this driver as a module, choose M here: 184 the module will be called cros_ec_light_prox. 185 186config GP2AP002 187 tristate "Sharp GP2AP002 Proximity/ALS sensor" 188 depends on I2C 189 select REGMAP 190 help 191 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip 192 hooked to an I2C bus. 193 194 To compile this driver as a module, choose M here: the 195 module will be called gp2ap002. 196 197config GP2AP020A00F 198 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 199 depends on I2C 200 select REGMAP_I2C 201 select IIO_BUFFER 202 select IIO_TRIGGERED_BUFFER 203 select IRQ_WORK 204 help 205 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 206 hooked to an I2C bus. 207 208 To compile this driver as a module, choose M here: the 209 module will be called gp2ap020a00f. 210 211config IQS621_ALS 212 tristate "Azoteq IQS621/622 ambient light sensors" 213 depends on MFD_IQS62X || COMPILE_TEST 214 help 215 Say Y here if you want to build support for the Azoteq IQS621 216 and IQS622 ambient light sensors. 217 218 To compile this driver as a module, choose M here: the module 219 will be called iqs621-als. 220 221config SENSORS_ISL29018 222 tristate "Intersil 29018 light and proximity sensor" 223 depends on I2C 224 select REGMAP_I2C 225 default n 226 help 227 If you say yes here you get support for ambient light sensing and 228 proximity infrared sensing from Intersil ISL29018. 229 This driver will provide the measurements of ambient light intensity 230 in lux, proximity infrared sensing and normal infrared sensing. 231 Data from sensor is accessible via sysfs. 232 233config SENSORS_ISL29028 234 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 235 depends on I2C 236 select REGMAP_I2C 237 help 238 Provides driver for the Intersil's ISL29028 device. 239 This driver supports the sysfs interface to get the ALS, IR intensity, 240 Proximity value via iio. The ISL29028 provides the concurrent sensing 241 of ambient light and proximity. 242 243config ISL29125 244 tristate "Intersil ISL29125 digital color light sensor" 245 depends on I2C 246 select IIO_BUFFER 247 select IIO_TRIGGERED_BUFFER 248 help 249 Say Y here if you want to build a driver for the Intersil ISL29125 250 RGB light sensor for I2C. 251 252 To compile this driver as a module, choose M here: the module will be 253 called isl29125. 254 255config HID_SENSOR_ALS 256 depends on HID_SENSOR_HUB 257 select IIO_BUFFER 258 select HID_SENSOR_IIO_COMMON 259 select HID_SENSOR_IIO_TRIGGER 260 tristate "HID ALS" 261 help 262 Say yes here to build support for the HID SENSOR 263 Ambient light sensor. 264 265 To compile this driver as a module, choose M here: the 266 module will be called hid-sensor-als. 267 268config HID_SENSOR_PROX 269 depends on HID_SENSOR_HUB 270 select IIO_BUFFER 271 select HID_SENSOR_IIO_COMMON 272 select HID_SENSOR_IIO_TRIGGER 273 tristate "HID PROX" 274 help 275 Say yes here to build support for the HID SENSOR 276 Proximity sensor. 277 278 To compile this driver as a module, choose M here: the 279 module will be called hid-sensor-prox. 280 281config JSA1212 282 tristate "JSA1212 ALS and proximity sensor driver" 283 depends on I2C 284 select REGMAP_I2C 285 help 286 Say Y here if you want to build a IIO driver for JSA1212 287 proximity & ALS sensor device. 288 289 To compile this driver as a module, choose M here: 290 the module will be called jsa1212. 291 292config RPR0521 293 tristate "ROHM RPR0521 ALS and proximity sensor driver" 294 depends on I2C 295 select REGMAP_I2C 296 help 297 Say Y here if you want to build support for ROHM's RPR0521 298 ambient light and proximity sensor device. 299 300 To compile this driver as a module, choose M here: 301 the module will be called rpr0521. 302 303config SENSORS_LM3533 304 tristate "LM3533 ambient light sensor" 305 depends on MFD_LM3533 306 help 307 If you say yes here you get support for the ambient light sensor 308 interface on National Semiconductor / TI LM3533 Lighting Power 309 chips. 310 311 The sensor interface can be used to control the LEDs and backlights 312 of the chip through defining five light zones and three sets of 313 corresponding output-current values. 314 315 The driver provides raw and mean adc readings along with the current 316 light zone through sysfs. A threshold event can be generated on zone 317 changes. The ALS-control output values can be set per zone for the 318 three current output channels. 319 320config LTR501 321 tristate "LTR-501ALS-01 light sensor" 322 depends on I2C 323 select REGMAP_I2C 324 select IIO_BUFFER 325 select IIO_TRIGGERED_BUFFER 326 help 327 If you say yes here you get support for the Lite-On LTR-501ALS-01 328 ambient light and proximity sensor. This driver also supports LTR-559 329 ALS/PS or LTR-301 ALS sensors. 330 331 This driver can also be built as a module. If so, the module 332 will be called ltr501. 333 334config LTRF216A 335 tristate "Liteon LTRF216A Light Sensor" 336 depends on I2C 337 select REGMAP_I2C 338 help 339 If you say Y or M here, you get support for Liteon LTRF216A 340 Ambient Light Sensor. 341 342 If built as a dynamically linked module, it will be called 343 ltrf216a. 344 345config LV0104CS 346 tristate "LV0104CS Ambient Light Sensor" 347 depends on I2C 348 help 349 Say Y here if you want to build support for the On Semiconductor 350 LV0104CS ambient light sensor. 351 352 To compile this driver as a module, choose M here: 353 the module will be called lv0104cs. 354 355config MAX44000 356 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 357 depends on I2C 358 select REGMAP_I2C 359 select IIO_BUFFER 360 select IIO_TRIGGERED_BUFFER 361 help 362 Say Y here if you want to build support for Maxim Integrated's 363 MAX44000 ambient and infrared proximity sensor device. 364 365 To compile this driver as a module, choose M here: 366 the module will be called max44000. 367 368config MAX44009 369 tristate "MAX44009 Ambient Light Sensor" 370 depends on I2C 371 select REGMAP_I2C 372 help 373 Say Y here if you want to build support for Maxim Integrated's 374 MAX44009 ambient light sensor device. 375 376 To compile this driver as a module, choose M here: 377 the module will be called max44009. 378 379config NOA1305 380 tristate "ON Semiconductor NOA1305 ambient light sensor" 381 depends on I2C 382 select REGMAP_I2C 383 help 384 Say Y here if you want to build support for the ON Semiconductor 385 NOA1305 ambient light sensor. 386 387 To compile this driver as a module, choose M here: 388 The module will be called noa1305. 389 390config OPT3001 391 tristate "Texas Instruments OPT3001 Light Sensor" 392 depends on I2C 393 help 394 If you say Y or M here, you get support for Texas Instruments 395 OPT3001 Ambient Light Sensor. 396 397 If built as a dynamically linked module, it will be called 398 opt3001. 399 400config PA12203001 401 tristate "TXC PA12203001 light and proximity sensor" 402 depends on I2C 403 select REGMAP_I2C 404 help 405 If you say yes here you get support for the TXC PA12203001 406 ambient light and proximity sensor. 407 408 This driver can also be built as a module. If so, the module 409 will be called pa12203001. 410 411config SI1133 412 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 413 depends on I2C 414 select REGMAP_I2C 415 help 416 Say Y here if you want to build a driver for the Silicon Labs SI1133 417 UV Index Sensor and Ambient Light Sensor chip. 418 419 To compile this driver as a module, choose M here: the module will be 420 called si1133. 421 422config SI1145 423 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 424 depends on I2C 425 select IIO_BUFFER 426 select IIO_TRIGGERED_BUFFER 427 help 428 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 429 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 430 chips. 431 432 To compile this driver as a module, choose M here: the module will be 433 called si1145. 434 435config STK3310 436 tristate "STK3310 ALS and proximity sensor" 437 depends on I2C 438 select REGMAP_I2C 439 help 440 Say yes here to get support for the Sensortek STK3310 ambient light 441 and proximity sensor. The STK3311 model is also supported by this 442 driver. 443 444 Choosing M will build the driver as a module. If so, the module 445 will be called stk3310. 446 447config ST_UVIS25 448 tristate "STMicroelectronics UVIS25 sensor driver" 449 depends on (I2C || SPI) 450 select IIO_BUFFER 451 select IIO_TRIGGERED_BUFFER 452 select ST_UVIS25_I2C if (I2C) 453 select ST_UVIS25_SPI if (SPI_MASTER) 454 help 455 Say yes here to build support for STMicroelectronics UVIS25 456 uv sensor 457 458 To compile this driver as a module, choose M here: the module 459 will be called st_uvis25. 460 461config ST_UVIS25_I2C 462 tristate 463 depends on ST_UVIS25 464 select REGMAP_I2C 465 466config ST_UVIS25_SPI 467 tristate 468 depends on ST_UVIS25 469 select REGMAP_SPI 470 471config TCS3414 472 tristate "TAOS TCS3414 digital color sensor" 473 depends on I2C 474 select IIO_BUFFER 475 select IIO_TRIGGERED_BUFFER 476 help 477 If you say yes here you get support for the TAOS TCS3414 478 family of digital color sensors. 479 480 This driver can also be built as a module. If so, the module 481 will be called tcs3414. 482 483config TCS3472 484 tristate "TAOS TCS3472 color light-to-digital converter" 485 depends on I2C 486 select IIO_BUFFER 487 select IIO_TRIGGERED_BUFFER 488 help 489 If you say yes here you get support for the TAOS TCS3472 490 family of color light-to-digital converters with IR filter. 491 492 This driver can also be built as a module. If so, the module 493 will be called tcs3472. 494 495config SENSORS_TSL2563 496 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 497 depends on I2C 498 help 499 If you say yes here you get support for the Taos TSL2560, 500 TSL2561, TSL2562 and TSL2563 ambient light sensors. 501 502 This driver can also be built as a module. If so, the module 503 will be called tsl2563. 504 505config TSL2583 506 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 507 depends on I2C 508 help 509 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 510 Access ALS data via iio, sysfs. 511 512config TSL2591 513 tristate "TAOS TSL2591 ambient light sensor" 514 depends on I2C 515 help 516 Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor, 517 featuring channels for combined visible + IR intensity and lux illuminance. 518 Access data via iio and sysfs. Supports iio_events. 519 520 To compile this driver as a module, select M: the 521 module will be called tsl2591. 522 523config TSL2772 524 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 525 depends on I2C 526 help 527 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 528 tmd2672, tsl2772, tmd2772 devices. 529 Provides iio_events and direct access via sysfs. 530 531config TSL4531 532 tristate "TAOS TSL4531 ambient light sensors" 533 depends on I2C 534 help 535 Say Y here if you want to build a driver for the TAOS TSL4531 family 536 of ambient light sensors with direct lux output. 537 538 To compile this driver as a module, choose M here: the 539 module will be called tsl4531. 540 541config US5182D 542 tristate "UPISEMI light and proximity sensor" 543 depends on I2C 544 help 545 If you say yes here you get support for the UPISEMI US5182D 546 ambient light and proximity sensor. 547 548 This driver can also be built as a module. If so, the module 549 will be called us5182d. 550 551config VCNL4000 552 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 553 select IIO_BUFFER 554 select IIO_TRIGGERED_BUFFER 555 depends on I2C 556 help 557 Say Y here if you want to build a driver for the Vishay VCNL4000, 558 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 559 sensor. 560 561 To compile this driver as a module, choose M here: the 562 module will be called vcnl4000. 563 564config VCNL4035 565 tristate "VCNL4035 combined ALS and proximity sensor" 566 select IIO_BUFFER 567 select IIO_TRIGGERED_BUFFER 568 select REGMAP_I2C 569 depends on I2C 570 help 571 Say Y here if you want to build a driver for the Vishay VCNL4035, 572 combined ambient light (ALS) and proximity sensor. Currently only ALS 573 function is available. 574 575 To compile this driver as a module, choose M here: the 576 module will be called vcnl4035. 577 578config VEML6030 579 tristate "VEML6030 ambient light sensor" 580 select REGMAP_I2C 581 depends on I2C 582 help 583 Say Y here if you want to build a driver for the Vishay VEML6030 584 ambient light sensor (ALS). 585 586 To compile this driver as a module, choose M here: the 587 module will be called veml6030. 588 589config VEML6070 590 tristate "VEML6070 UV A light sensor" 591 depends on I2C 592 help 593 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 594 light sensor. 595 596 To compile this driver as a module, choose M here: the 597 module will be called veml6070. 598 599config VL6180 600 tristate "VL6180 ALS, range and proximity sensor" 601 depends on I2C 602 help 603 Say Y here if you want to build a driver for the STMicroelectronics 604 VL6180 combined ambient light, range and proximity sensor. 605 606 To compile this driver as a module, choose M here: the 607 module will be called vl6180. 608 609config ZOPT2201 610 tristate "ZOPT2201 ALS and UV B sensor" 611 depends on I2C 612 help 613 Say Y here if you want to build a driver for the IDT 614 ZOPT2201 ambient light and UV B sensor. 615 616 To compile this driver as a module, choose M here: the 617 module will be called zopt2201. 618 619endmenu 620