1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config ADUX1020 36 tristate "ADUX1020 photometric sensor" 37 select REGMAP_I2C 38 depends on I2C 39 help 40 Say Y here if you want to build a driver for the Analog Devices 41 ADUX1020 photometric sensor. 42 43 To compile this driver as a module, choose M here: the 44 module will be called adux1020. 45 46config AL3010 47 tristate "AL3010 ambient light sensor" 48 depends on I2C 49 help 50 Say Y here if you want to build a driver for the Dyna Image AL3010 51 ambient light sensor. 52 53 To compile this driver as a module, choose M here: the 54 module will be called al3010. 55 56config AL3320A 57 tristate "AL3320A ambient light sensor" 58 depends on I2C 59 help 60 Say Y here if you want to build a driver for the Dyna Image AL3320A 61 ambient light sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called al3320a. 65 66config APDS9300 67 tristate "APDS9300 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here if you want to build a driver for the Avago APDS9300 71 ambient light sensor. 72 73 To compile this driver as a module, choose M here: the 74 module will be called apds9300. 75 76config APDS9960 77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 78 select REGMAP_I2C 79 select IIO_BUFFER 80 select IIO_KFIFO_BUF 81 depends on I2C 82 help 83 Say Y here to build I2C interface support for the Avago 84 APDS9960 gesture/RGB/ALS/proximity sensor. 85 86 To compile this driver as a module, choose M here: the 87 module will be called apds9960 88 89config BH1750 90 tristate "ROHM BH1750 ambient light sensor" 91 depends on I2C 92 help 93 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 94 BH1750, BH1751 ambient light sensors. 95 96 To compile this driver as a module, choose M here: the module will 97 be called bh1750. 98 99config BH1780 100 tristate "ROHM BH1780 ambient light sensor" 101 depends on I2C 102 help 103 Say Y here to build support for the ROHM BH1780GLI ambient 104 light sensor. 105 106 To compile this driver as a module, choose M here: the module will 107 be called bh1780. 108 109config CM32181 110 depends on I2C 111 tristate "CM32181 driver" 112 help 113 Say Y here if you use cm32181. 114 This option enables ambient light sensor using 115 Capella cm32181 device driver. 116 117 To compile this driver as a module, choose M here: 118 the module will be called cm32181. 119 120config CM3232 121 depends on I2C 122 tristate "CM3232 ambient light sensor" 123 help 124 Say Y here if you use cm3232. 125 This option enables ambient light sensor using 126 Capella Microsystems cm3232 device driver. 127 128 To compile this driver as a module, choose M here: 129 the module will be called cm3232. 130 131config CM3323 132 depends on I2C 133 tristate "Capella CM3323 color light sensor" 134 help 135 Say Y here if you want to build a driver for Capella CM3323 136 color sensor. 137 138 To compile this driver as a module, choose M here: the module will 139 be called cm3323. 140 141config CM3605 142 tristate "Capella CM3605 ambient light and proximity sensor" 143 depends on OF 144 help 145 Say Y here if you want to build a driver for Capella CM3605 146 ambient light and short range proximity sensor. 147 148 To compile this driver as a module, choose M here: the module will 149 be called cm3605. 150 151config CM36651 152 depends on I2C 153 tristate "CM36651 driver" 154 help 155 Say Y here if you use cm36651. 156 This option enables proximity & RGB sensor using 157 Capella cm36651 device driver. 158 159 To compile this driver as a module, choose M here: 160 the module will be called cm36651. 161 162config IIO_CROS_EC_LIGHT_PROX 163 tristate "ChromeOS EC Light and Proximity Sensors" 164 depends on IIO_CROS_EC_SENSORS_CORE 165 help 166 Say Y here if you use the light and proximity sensors 167 presented by the ChromeOS EC Sensor hub. 168 169 To compile this driver as a module, choose M here: 170 the module will be called cros_ec_light_prox. 171 172config GP2AP002 173 tristate "Sharp GP2AP002 Proximity/ALS sensor" 174 depends on I2C 175 select REGMAP 176 help 177 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip 178 hooked to an I2C bus. 179 180 To compile this driver as a module, choose M here: the 181 module will be called gp2ap002. 182 183config GP2AP020A00F 184 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 185 depends on I2C 186 select REGMAP_I2C 187 select IIO_BUFFER 188 select IIO_TRIGGERED_BUFFER 189 select IRQ_WORK 190 help 191 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 192 hooked to an I2C bus. 193 194 To compile this driver as a module, choose M here: the 195 module will be called gp2ap020a00f. 196 197config IQS621_ALS 198 tristate "Azoteq IQS621/622 ambient light sensors" 199 depends on MFD_IQS62X || COMPILE_TEST 200 help 201 Say Y here if you want to build support for the Azoteq IQS621 202 and IQS622 ambient light sensors. 203 204 To compile this driver as a module, choose M here: the module 205 will be called iqs621-als. 206 207config SENSORS_ISL29018 208 tristate "Intersil 29018 light and proximity sensor" 209 depends on I2C 210 select REGMAP_I2C 211 default n 212 help 213 If you say yes here you get support for ambient light sensing and 214 proximity infrared sensing from Intersil ISL29018. 215 This driver will provide the measurements of ambient light intensity 216 in lux, proximity infrared sensing and normal infrared sensing. 217 Data from sensor is accessible via sysfs. 218 219config SENSORS_ISL29028 220 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 221 depends on I2C 222 select REGMAP_I2C 223 help 224 Provides driver for the Intersil's ISL29028 device. 225 This driver supports the sysfs interface to get the ALS, IR intensity, 226 Proximity value via iio. The ISL29028 provides the concurrent sensing 227 of ambient light and proximity. 228 229config ISL29125 230 tristate "Intersil ISL29125 digital color light sensor" 231 depends on I2C 232 select IIO_BUFFER 233 select IIO_TRIGGERED_BUFFER 234 help 235 Say Y here if you want to build a driver for the Intersil ISL29125 236 RGB light sensor for I2C. 237 238 To compile this driver as a module, choose M here: the module will be 239 called isl29125. 240 241config HID_SENSOR_ALS 242 depends on HID_SENSOR_HUB 243 select IIO_BUFFER 244 select IIO_TRIGGERED_BUFFER 245 select HID_SENSOR_IIO_COMMON 246 select HID_SENSOR_IIO_TRIGGER 247 tristate "HID ALS" 248 help 249 Say yes here to build support for the HID SENSOR 250 Ambient light sensor. 251 252 To compile this driver as a module, choose M here: the 253 module will be called hid-sensor-als. 254 255config HID_SENSOR_PROX 256 depends on HID_SENSOR_HUB 257 select IIO_BUFFER 258 select IIO_TRIGGERED_BUFFER 259 select HID_SENSOR_IIO_COMMON 260 select HID_SENSOR_IIO_TRIGGER 261 tristate "HID PROX" 262 help 263 Say yes here to build support for the HID SENSOR 264 Proximity sensor. 265 266 To compile this driver as a module, choose M here: the 267 module will be called hid-sensor-prox. 268 269config JSA1212 270 tristate "JSA1212 ALS and proximity sensor driver" 271 depends on I2C 272 select REGMAP_I2C 273 help 274 Say Y here if you want to build a IIO driver for JSA1212 275 proximity & ALS sensor device. 276 277 To compile this driver as a module, choose M here: 278 the module will be called jsa1212. 279 280config RPR0521 281 tristate "ROHM RPR0521 ALS and proximity sensor driver" 282 depends on I2C 283 select REGMAP_I2C 284 help 285 Say Y here if you want to build support for ROHM's RPR0521 286 ambient light and proximity sensor device. 287 288 To compile this driver as a module, choose M here: 289 the module will be called rpr0521. 290 291config SENSORS_LM3533 292 tristate "LM3533 ambient light sensor" 293 depends on MFD_LM3533 294 help 295 If you say yes here you get support for the ambient light sensor 296 interface on National Semiconductor / TI LM3533 Lighting Power 297 chips. 298 299 The sensor interface can be used to control the LEDs and backlights 300 of the chip through defining five light zones and three sets of 301 corresponding output-current values. 302 303 The driver provides raw and mean adc readings along with the current 304 light zone through sysfs. A threshold event can be generated on zone 305 changes. The ALS-control output values can be set per zone for the 306 three current output channels. 307 308config LTR501 309 tristate "LTR-501ALS-01 light sensor" 310 depends on I2C 311 select REGMAP_I2C 312 select IIO_BUFFER 313 select IIO_TRIGGERED_BUFFER 314 help 315 If you say yes here you get support for the Lite-On LTR-501ALS-01 316 ambient light and proximity sensor. This driver also supports LTR-559 317 ALS/PS or LTR-301 ALS sensors. 318 319 This driver can also be built as a module. If so, the module 320 will be called ltr501. 321 322config LV0104CS 323 tristate "LV0104CS Ambient Light Sensor" 324 depends on I2C 325 help 326 Say Y here if you want to build support for the On Semiconductor 327 LV0104CS ambient light sensor. 328 329 To compile this driver as a module, choose M here: 330 the module will be called lv0104cs. 331 332config MAX44000 333 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 334 depends on I2C 335 select REGMAP_I2C 336 select IIO_BUFFER 337 select IIO_TRIGGERED_BUFFER 338 help 339 Say Y here if you want to build support for Maxim Integrated's 340 MAX44000 ambient and infrared proximity sensor device. 341 342 To compile this driver as a module, choose M here: 343 the module will be called max44000. 344 345config MAX44009 346 tristate "MAX44009 Ambient Light Sensor" 347 depends on I2C 348 select REGMAP_I2C 349 help 350 Say Y here if you want to build support for Maxim Integrated's 351 MAX44009 ambient light sensor device. 352 353 To compile this driver as a module, choose M here: 354 the module will be called max44009. 355 356config NOA1305 357 tristate "ON Semiconductor NOA1305 ambient light sensor" 358 depends on I2C 359 select REGMAP_I2C 360 help 361 Say Y here if you want to build support for the ON Semiconductor 362 NOA1305 ambient light sensor. 363 364 To compile this driver as a module, choose M here: 365 The module will be called noa1305. 366 367config OPT3001 368 tristate "Texas Instruments OPT3001 Light Sensor" 369 depends on I2C 370 help 371 If you say Y or M here, you get support for Texas Instruments 372 OPT3001 Ambient Light Sensor. 373 374 If built as a dynamically linked module, it will be called 375 opt3001. 376 377config PA12203001 378 tristate "TXC PA12203001 light and proximity sensor" 379 depends on I2C 380 select REGMAP_I2C 381 help 382 If you say yes here you get support for the TXC PA12203001 383 ambient light and proximity sensor. 384 385 This driver can also be built as a module. If so, the module 386 will be called pa12203001. 387 388config SI1133 389 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 390 depends on I2C 391 select REGMAP_I2C 392 help 393 Say Y here if you want to build a driver for the Silicon Labs SI1133 394 UV Index Sensor and Ambient Light Sensor chip. 395 396 To compile this driver as a module, choose M here: the module will be 397 called si1133. 398 399config SI1145 400 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 401 depends on I2C 402 select IIO_BUFFER 403 select IIO_TRIGGERED_BUFFER 404 help 405 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 406 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 407 chips. 408 409 To compile this driver as a module, choose M here: the module will be 410 called si1145. 411 412config STK3310 413 tristate "STK3310 ALS and proximity sensor" 414 depends on I2C 415 select REGMAP_I2C 416 help 417 Say yes here to get support for the Sensortek STK3310 ambient light 418 and proximity sensor. The STK3311 model is also supported by this 419 driver. 420 421 Choosing M will build the driver as a module. If so, the module 422 will be called stk3310. 423 424config ST_UVIS25 425 tristate "STMicroelectronics UVIS25 sensor driver" 426 depends on (I2C || SPI) 427 select IIO_BUFFER 428 select IIO_TRIGGERED_BUFFER 429 select ST_UVIS25_I2C if (I2C) 430 select ST_UVIS25_SPI if (SPI_MASTER) 431 help 432 Say yes here to build support for STMicroelectronics UVIS25 433 uv sensor 434 435 To compile this driver as a module, choose M here: the module 436 will be called st_uvis25. 437 438config ST_UVIS25_I2C 439 tristate 440 depends on ST_UVIS25 441 select REGMAP_I2C 442 443config ST_UVIS25_SPI 444 tristate 445 depends on ST_UVIS25 446 select REGMAP_SPI 447 448config TCS3414 449 tristate "TAOS TCS3414 digital color sensor" 450 depends on I2C 451 select IIO_BUFFER 452 select IIO_TRIGGERED_BUFFER 453 help 454 If you say yes here you get support for the TAOS TCS3414 455 family of digital color sensors. 456 457 This driver can also be built as a module. If so, the module 458 will be called tcs3414. 459 460config TCS3472 461 tristate "TAOS TCS3472 color light-to-digital converter" 462 depends on I2C 463 select IIO_BUFFER 464 select IIO_TRIGGERED_BUFFER 465 help 466 If you say yes here you get support for the TAOS TCS3472 467 family of color light-to-digital converters with IR filter. 468 469 This driver can also be built as a module. If so, the module 470 will be called tcs3472. 471 472config SENSORS_TSL2563 473 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 474 depends on I2C 475 help 476 If you say yes here you get support for the Taos TSL2560, 477 TSL2561, TSL2562 and TSL2563 ambient light sensors. 478 479 This driver can also be built as a module. If so, the module 480 will be called tsl2563. 481 482config TSL2583 483 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 484 depends on I2C 485 help 486 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 487 Access ALS data via iio, sysfs. 488 489config TSL2772 490 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 491 depends on I2C 492 help 493 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 494 tmd2672, tsl2772, tmd2772 devices. 495 Provides iio_events and direct access via sysfs. 496 497config TSL4531 498 tristate "TAOS TSL4531 ambient light sensors" 499 depends on I2C 500 help 501 Say Y here if you want to build a driver for the TAOS TSL4531 family 502 of ambient light sensors with direct lux output. 503 504 To compile this driver as a module, choose M here: the 505 module will be called tsl4531. 506 507config US5182D 508 tristate "UPISEMI light and proximity sensor" 509 depends on I2C 510 help 511 If you say yes here you get support for the UPISEMI US5182D 512 ambient light and proximity sensor. 513 514 This driver can also be built as a module. If so, the module 515 will be called us5182d. 516 517config VCNL4000 518 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 519 select IIO_BUFFER 520 select IIO_TRIGGERED_BUFFER 521 depends on I2C 522 help 523 Say Y here if you want to build a driver for the Vishay VCNL4000, 524 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 525 sensor. 526 527 To compile this driver as a module, choose M here: the 528 module will be called vcnl4000. 529 530config VCNL4035 531 tristate "VCNL4035 combined ALS and proximity sensor" 532 select IIO_TRIGGERED_BUFFER 533 select REGMAP_I2C 534 depends on I2C 535 help 536 Say Y here if you want to build a driver for the Vishay VCNL4035, 537 combined ambient light (ALS) and proximity sensor. Currently only ALS 538 function is available. 539 540 To compile this driver as a module, choose M here: the 541 module will be called vcnl4035. 542 543config VEML6030 544 tristate "VEML6030 ambient light sensor" 545 select REGMAP_I2C 546 depends on I2C 547 help 548 Say Y here if you want to build a driver for the Vishay VEML6030 549 ambient light sensor (ALS). 550 551 To compile this driver as a module, choose M here: the 552 module will be called veml6030. 553 554config VEML6070 555 tristate "VEML6070 UV A light sensor" 556 depends on I2C 557 help 558 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 559 light sensor. 560 561 To compile this driver as a module, choose M here: the 562 module will be called veml6070. 563 564config VL6180 565 tristate "VL6180 ALS, range and proximity sensor" 566 depends on I2C 567 help 568 Say Y here if you want to build a driver for the STMicroelectronics 569 VL6180 combined ambient light, range and proximity sensor. 570 571 To compile this driver as a module, choose M here: the 572 module will be called vl6180. 573 574config ZOPT2201 575 tristate "ZOPT2201 ALS and UV B sensor" 576 depends on I2C 577 help 578 Say Y here if you want to build a driver for the IDT 579 ZOPT2201 ambient light and UV B sensor. 580 581 To compile this driver as a module, choose M here: the 582 module will be called zopt2201. 583 584endmenu 585