1# 2# Light sensors 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Light sensors" 7 8config ACPI_ALS 9 tristate "ACPI Ambient Light Sensor" 10 depends on ACPI 11 select IIO_BUFFER 12 select IIO_TRIGGERED_BUFFER 13 select IIO_KFIFO_BUF 14 help 15 Say Y here if you want to build a driver for the ACPI0008 16 Ambient Light Sensor. 17 18 To compile this driver as a module, choose M here: the module will 19 be called acpi-als. 20 21config ADJD_S311 22 tristate "ADJD-S311-CR999 digital color sensor" 23 select IIO_BUFFER 24 select IIO_TRIGGERED_BUFFER 25 depends on I2C 26 help 27 If you say yes here you get support for the Avago ADJD-S311-CR999 28 digital color light sensor. 29 30 This driver can also be built as a module. If so, the module 31 will be called adjd_s311. 32 33config AL3320A 34 tristate "AL3320A ambient light sensor" 35 depends on I2C 36 help 37 Say Y here if you want to build a driver for the Dyna Image AL3320A 38 ambient light sensor. 39 40 To compile this driver as a module, choose M here: the 41 module will be called al3320a. 42 43config APDS9300 44 tristate "APDS9300 ambient light sensor" 45 depends on I2C 46 help 47 Say Y here if you want to build a driver for the Avago APDS9300 48 ambient light sensor. 49 50 To compile this driver as a module, choose M here: the 51 module will be called apds9300. 52 53config APDS9960 54 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 55 select REGMAP_I2C 56 select IIO_BUFFER 57 select IIO_KFIFO_BUF 58 depends on I2C 59 help 60 Say Y here to build I2C interface support for the Avago 61 APDS9960 gesture/RGB/ALS/proximity sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called apds9960 65 66config BH1750 67 tristate "ROHM BH1750 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 71 BH1750, BH1751 ambient light sensors. 72 73 To compile this driver as a module, choose M here: the module will 74 be called bh1750. 75 76config CM32181 77 depends on I2C 78 tristate "CM32181 driver" 79 help 80 Say Y here if you use cm32181. 81 This option enables ambient light sensor using 82 Capella cm32181 device driver. 83 84 To compile this driver as a module, choose M here: 85 the module will be called cm32181. 86 87config CM3232 88 depends on I2C 89 tristate "CM3232 ambient light sensor" 90 help 91 Say Y here if you use cm3232. 92 This option enables ambient light sensor using 93 Capella Microsystems cm3232 device driver. 94 95 To compile this driver as a module, choose M here: 96 the module will be called cm3232. 97 98config CM3323 99 depends on I2C 100 tristate "Capella CM3323 color light sensor" 101 help 102 Say Y here if you want to build a driver for Capella CM3323 103 color sensor. 104 105 To compile this driver as a module, choose M here: the module will 106 be called cm3323. 107 108config CM36651 109 depends on I2C 110 tristate "CM36651 driver" 111 help 112 Say Y here if you use cm36651. 113 This option enables proximity & RGB sensor using 114 Capella cm36651 device driver. 115 116 To compile this driver as a module, choose M here: 117 the module will be called cm36651. 118 119config GP2AP020A00F 120 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 121 depends on I2C 122 select REGMAP_I2C 123 select IIO_BUFFER 124 select IIO_TRIGGERED_BUFFER 125 select IRQ_WORK 126 help 127 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 128 hooked to an I2C bus. 129 130 To compile this driver as a module, choose M here: the 131 module will be called gp2ap020a00f. 132 133config ISL29125 134 tristate "Intersil ISL29125 digital color light sensor" 135 depends on I2C 136 select IIO_BUFFER 137 select IIO_TRIGGERED_BUFFER 138 help 139 Say Y here if you want to build a driver for the Intersil ISL29125 140 RGB light sensor for I2C. 141 142 To compile this driver as a module, choose M here: the module will be 143 called isl29125. 144 145config HID_SENSOR_ALS 146 depends on HID_SENSOR_HUB 147 select IIO_BUFFER 148 select IIO_TRIGGERED_BUFFER 149 select HID_SENSOR_IIO_COMMON 150 select HID_SENSOR_IIO_TRIGGER 151 tristate "HID ALS" 152 help 153 Say yes here to build support for the HID SENSOR 154 Ambient light sensor. 155 156 To compile this driver as a module, choose M here: the 157 module will be called hid-sensor-als. 158 159config HID_SENSOR_PROX 160 depends on HID_SENSOR_HUB 161 select IIO_BUFFER 162 select IIO_TRIGGERED_BUFFER 163 select HID_SENSOR_IIO_COMMON 164 select HID_SENSOR_IIO_TRIGGER 165 tristate "HID PROX" 166 help 167 Say yes here to build support for the HID SENSOR 168 Proximity sensor. 169 170 To compile this driver as a module, choose M here: the 171 module will be called hid-sensor-prox. 172 173config JSA1212 174 tristate "JSA1212 ALS and proximity sensor driver" 175 depends on I2C 176 select REGMAP_I2C 177 help 178 Say Y here if you want to build a IIO driver for JSA1212 179 proximity & ALS sensor device. 180 181 To compile this driver as a module, choose M here: 182 the module will be called jsa1212. 183 184config RPR0521 185 tristate "ROHM RPR0521 ALS and proximity sensor driver" 186 depends on I2C 187 select REGMAP_I2C 188 help 189 Say Y here if you want to build support for ROHM's RPR0521 190 ambient light and proximity sensor device. 191 192 To compile this driver as a module, choose M here: 193 the module will be called rpr0521. 194 195config SENSORS_LM3533 196 tristate "LM3533 ambient light sensor" 197 depends on MFD_LM3533 198 help 199 If you say yes here you get support for the ambient light sensor 200 interface on National Semiconductor / TI LM3533 Lighting Power 201 chips. 202 203 The sensor interface can be used to control the LEDs and backlights 204 of the chip through defining five light zones and three sets of 205 corresponding output-current values. 206 207 The driver provides raw and mean adc readings along with the current 208 light zone through sysfs. A threshold event can be generated on zone 209 changes. The ALS-control output values can be set per zone for the 210 three current output channels. 211 212config LTR501 213 tristate "LTR-501ALS-01 light sensor" 214 depends on I2C 215 select REGMAP_I2C 216 select IIO_BUFFER 217 select IIO_TRIGGERED_BUFFER 218 help 219 If you say yes here you get support for the Lite-On LTR-501ALS-01 220 ambient light and proximity sensor. This driver also supports LTR-559 221 ALS/PS or LTR-301 ALS sensors. 222 223 This driver can also be built as a module. If so, the module 224 will be called ltr501. 225 226config OPT3001 227 tristate "Texas Instruments OPT3001 Light Sensor" 228 depends on I2C 229 help 230 If you say Y or M here, you get support for Texas Instruments 231 OPT3001 Ambient Light Sensor. 232 233 If built as a dynamically linked module, it will be called 234 opt3001. 235 236config PA12203001 237 tristate "TXC PA12203001 light and proximity sensor" 238 depends on I2C 239 select REGMAP_I2C 240 help 241 If you say yes here you get support for the TXC PA12203001 242 ambient light and proximity sensor. 243 244 This driver can also be built as a module. If so, the module 245 will be called pa12203001. 246 247config STK3310 248 tristate "STK3310 ALS and proximity sensor" 249 depends on I2C 250 select REGMAP_I2C 251 help 252 Say yes here to get support for the Sensortek STK3310 ambient light 253 and proximity sensor. The STK3311 model is also supported by this 254 driver. 255 256 Choosing M will build the driver as a module. If so, the module 257 will be called stk3310. 258 259config TCS3414 260 tristate "TAOS TCS3414 digital color sensor" 261 depends on I2C 262 select IIO_BUFFER 263 select IIO_TRIGGERED_BUFFER 264 help 265 If you say yes here you get support for the TAOS TCS3414 266 family of digital color sensors. 267 268 This driver can also be built as a module. If so, the module 269 will be called tcs3414. 270 271config TCS3472 272 tristate "TAOS TCS3472 color light-to-digital converter" 273 depends on I2C 274 select IIO_BUFFER 275 select IIO_TRIGGERED_BUFFER 276 help 277 If you say yes here you get support for the TAOS TCS3472 278 family of color light-to-digital converters with IR filter. 279 280 This driver can also be built as a module. If so, the module 281 will be called tcs3472. 282 283config SENSORS_TSL2563 284 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 285 depends on I2C 286 help 287 If you say yes here you get support for the Taos TSL2560, 288 TSL2561, TSL2562 and TSL2563 ambient light sensors. 289 290 This driver can also be built as a module. If so, the module 291 will be called tsl2563. 292 293config TSL4531 294 tristate "TAOS TSL4531 ambient light sensors" 295 depends on I2C 296 help 297 Say Y here if you want to build a driver for the TAOS TSL4531 family 298 of ambient light sensors with direct lux output. 299 300 To compile this driver as a module, choose M here: the 301 module will be called tsl4531. 302 303config US5182D 304 tristate "UPISEMI light and proximity sensor" 305 depends on I2C 306 help 307 If you say yes here you get support for the UPISEMI US5182D 308 ambient light and proximity sensor. 309 310 This driver can also be built as a module. If so, the module 311 will be called us5182d. 312 313config VCNL4000 314 tristate "VCNL4000 combined ALS and proximity sensor" 315 depends on I2C 316 help 317 Say Y here if you want to build a driver for the Vishay VCNL4000 318 combined ambient light and proximity sensor. 319 320 To compile this driver as a module, choose M here: the 321 module will be called vcnl4000. 322 323endmenu 324