1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config ADUX1020 36 tristate "ADUX1020 photometric sensor" 37 select REGMAP_I2C 38 depends on I2C 39 help 40 Say Y here if you want to build a driver for the Analog Devices 41 ADUX1020 photometric sensor. 42 43 To compile this driver as a module, choose M here: the 44 module will be called adux1020. 45 46config AL3010 47 tristate "AL3010 ambient light sensor" 48 depends on I2C 49 help 50 Say Y here if you want to build a driver for the Dyna Image AL3010 51 ambient light sensor. 52 53 To compile this driver as a module, choose M here: the 54 module will be called al3010. 55 56config AL3320A 57 tristate "AL3320A ambient light sensor" 58 depends on I2C 59 help 60 Say Y here if you want to build a driver for the Dyna Image AL3320A 61 ambient light sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called al3320a. 65 66config APDS9300 67 tristate "APDS9300 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here if you want to build a driver for the Avago APDS9300 71 ambient light sensor. 72 73 To compile this driver as a module, choose M here: the 74 module will be called apds9300. 75 76config APDS9960 77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 78 select REGMAP_I2C 79 select IIO_BUFFER 80 select IIO_KFIFO_BUF 81 depends on I2C 82 help 83 Say Y here to build I2C interface support for the Avago 84 APDS9960 gesture/RGB/ALS/proximity sensor. 85 86 To compile this driver as a module, choose M here: the 87 module will be called apds9960 88 89config AS73211 90 tristate "AMS AS73211 XYZ color sensor" 91 depends on I2C 92 select IIO_BUFFER 93 select IIO_TRIGGERED_BUFFER 94 help 95 If you say yes here you get support for the AMS AS73211 96 JENCOLOR(R) Digital XYZ Sensor. 97 98 For triggered measurements, you will need an additional trigger driver 99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. 100 101 This driver can also be built as a module. If so, the module 102 will be called as73211. 103 104config BH1750 105 tristate "ROHM BH1750 ambient light sensor" 106 depends on I2C 107 help 108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 109 BH1750, BH1751 ambient light sensors. 110 111 To compile this driver as a module, choose M here: the module will 112 be called bh1750. 113 114config BH1780 115 tristate "ROHM BH1780 ambient light sensor" 116 depends on I2C 117 help 118 Say Y here to build support for the ROHM BH1780GLI ambient 119 light sensor. 120 121 To compile this driver as a module, choose M here: the module will 122 be called bh1780. 123 124config CM32181 125 depends on I2C 126 tristate "CM32181 driver" 127 help 128 Say Y here if you use cm32181. 129 This option enables ambient light sensor using 130 Capella cm32181 device driver. 131 132 To compile this driver as a module, choose M here: 133 the module will be called cm32181. 134 135config CM3232 136 depends on I2C 137 tristate "CM3232 ambient light sensor" 138 help 139 Say Y here if you use cm3232. 140 This option enables ambient light sensor using 141 Capella Microsystems cm3232 device driver. 142 143 To compile this driver as a module, choose M here: 144 the module will be called cm3232. 145 146config CM3323 147 depends on I2C 148 tristate "Capella CM3323 color light sensor" 149 help 150 Say Y here if you want to build a driver for Capella CM3323 151 color sensor. 152 153 To compile this driver as a module, choose M here: the module will 154 be called cm3323. 155 156config CM3605 157 tristate "Capella CM3605 ambient light and proximity sensor" 158 help 159 Say Y here if you want to build a driver for Capella CM3605 160 ambient light and short range proximity sensor. 161 162 To compile this driver as a module, choose M here: the module will 163 be called cm3605. 164 165config CM36651 166 depends on I2C 167 tristate "CM36651 driver" 168 help 169 Say Y here if you use cm36651. 170 This option enables proximity & RGB sensor using 171 Capella cm36651 device driver. 172 173 To compile this driver as a module, choose M here: 174 the module will be called cm36651. 175 176config IIO_CROS_EC_LIGHT_PROX 177 tristate "ChromeOS EC Light and Proximity Sensors" 178 depends on IIO_CROS_EC_SENSORS_CORE 179 help 180 Say Y here if you use the light and proximity sensors 181 presented by the ChromeOS EC Sensor hub. 182 183 To compile this driver as a module, choose M here: 184 the module will be called cros_ec_light_prox. 185 186config GP2AP002 187 tristate "Sharp GP2AP002 Proximity/ALS sensor" 188 depends on I2C 189 select REGMAP 190 help 191 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip 192 hooked to an I2C bus. 193 194 To compile this driver as a module, choose M here: the 195 module will be called gp2ap002. 196 197config GP2AP020A00F 198 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 199 depends on I2C 200 select REGMAP_I2C 201 select IIO_BUFFER 202 select IIO_TRIGGERED_BUFFER 203 select IRQ_WORK 204 help 205 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 206 hooked to an I2C bus. 207 208 To compile this driver as a module, choose M here: the 209 module will be called gp2ap020a00f. 210 211config IQS621_ALS 212 tristate "Azoteq IQS621/622 ambient light sensors" 213 depends on MFD_IQS62X || COMPILE_TEST 214 help 215 Say Y here if you want to build support for the Azoteq IQS621 216 and IQS622 ambient light sensors. 217 218 To compile this driver as a module, choose M here: the module 219 will be called iqs621-als. 220 221config SENSORS_ISL29018 222 tristate "Intersil 29018 light and proximity sensor" 223 depends on I2C 224 select REGMAP_I2C 225 default n 226 help 227 If you say yes here you get support for ambient light sensing and 228 proximity infrared sensing from Intersil ISL29018. 229 This driver will provide the measurements of ambient light intensity 230 in lux, proximity infrared sensing and normal infrared sensing. 231 Data from sensor is accessible via sysfs. 232 233config SENSORS_ISL29028 234 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 235 depends on I2C 236 select REGMAP_I2C 237 help 238 Provides driver for the Intersil's ISL29028 device. 239 This driver supports the sysfs interface to get the ALS, IR intensity, 240 Proximity value via iio. The ISL29028 provides the concurrent sensing 241 of ambient light and proximity. 242 243config ISL29125 244 tristate "Intersil ISL29125 digital color light sensor" 245 depends on I2C 246 select IIO_BUFFER 247 select IIO_TRIGGERED_BUFFER 248 help 249 Say Y here if you want to build a driver for the Intersil ISL29125 250 RGB light sensor for I2C. 251 252 To compile this driver as a module, choose M here: the module will be 253 called isl29125. 254 255config HID_SENSOR_ALS 256 depends on HID_SENSOR_HUB 257 select IIO_BUFFER 258 select HID_SENSOR_IIO_COMMON 259 select HID_SENSOR_IIO_TRIGGER 260 tristate "HID ALS" 261 help 262 Say yes here to build support for the HID SENSOR 263 Ambient light sensor. 264 265 To compile this driver as a module, choose M here: the 266 module will be called hid-sensor-als. 267 268config HID_SENSOR_PROX 269 depends on HID_SENSOR_HUB 270 select IIO_BUFFER 271 select HID_SENSOR_IIO_COMMON 272 select HID_SENSOR_IIO_TRIGGER 273 tristate "HID PROX" 274 help 275 Say yes here to build support for the HID SENSOR 276 Proximity sensor. 277 278 To compile this driver as a module, choose M here: the 279 module will be called hid-sensor-prox. 280 281config JSA1212 282 tristate "JSA1212 ALS and proximity sensor driver" 283 depends on I2C 284 select REGMAP_I2C 285 help 286 Say Y here if you want to build a IIO driver for JSA1212 287 proximity & ALS sensor device. 288 289 To compile this driver as a module, choose M here: 290 the module will be called jsa1212. 291 292config ROHM_BU27034 293 tristate "ROHM BU27034 ambient light sensor" 294 depends on I2C 295 select REGMAP_I2C 296 select IIO_GTS_HELPER 297 select IIO_BUFFER 298 select IIO_KFIFO_BUF 299 help 300 Enable support for the ROHM BU27034 ambient light sensor. ROHM BU27034 301 is an ambient light sesnor with 3 channels and 3 photo diodes capable 302 of detecting a very wide range of illuminance. 303 Typical application is adjusting LCD and backlight power of TVs and 304 mobile phones. 305 306config RPR0521 307 tristate "ROHM RPR0521 ALS and proximity sensor driver" 308 depends on I2C 309 select REGMAP_I2C 310 select IIO_BUFFER 311 select IIO_TRIGGERED_BUFFER 312 help 313 Say Y here if you want to build support for ROHM's RPR0521 314 ambient light and proximity sensor device. 315 316 To compile this driver as a module, choose M here: 317 the module will be called rpr0521. 318 319config SENSORS_LM3533 320 tristate "LM3533 ambient light sensor" 321 depends on MFD_LM3533 322 help 323 If you say yes here you get support for the ambient light sensor 324 interface on National Semiconductor / TI LM3533 Lighting Power 325 chips. 326 327 The sensor interface can be used to control the LEDs and backlights 328 of the chip through defining five light zones and three sets of 329 corresponding output-current values. 330 331 The driver provides raw and mean adc readings along with the current 332 light zone through sysfs. A threshold event can be generated on zone 333 changes. The ALS-control output values can be set per zone for the 334 three current output channels. 335 336config LTR501 337 tristate "LTR-501ALS-01 light sensor" 338 depends on I2C 339 select REGMAP_I2C 340 select IIO_BUFFER 341 select IIO_TRIGGERED_BUFFER 342 help 343 If you say yes here you get support for the Lite-On LTR-501ALS-01 344 ambient light and proximity sensor. This driver also supports LTR-559 345 ALS/PS or LTR-301 ALS sensors. 346 347 This driver can also be built as a module. If so, the module 348 will be called ltr501. 349 350config LTRF216A 351 tristate "Liteon LTRF216A Light Sensor" 352 depends on I2C 353 select REGMAP_I2C 354 help 355 If you say Y or M here, you get support for Liteon LTRF216A 356 Ambient Light Sensor. 357 358 If built as a dynamically linked module, it will be called 359 ltrf216a. 360 361config LV0104CS 362 tristate "LV0104CS Ambient Light Sensor" 363 depends on I2C 364 help 365 Say Y here if you want to build support for the On Semiconductor 366 LV0104CS ambient light sensor. 367 368 To compile this driver as a module, choose M here: 369 the module will be called lv0104cs. 370 371config MAX44000 372 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 373 depends on I2C 374 select REGMAP_I2C 375 select IIO_BUFFER 376 select IIO_TRIGGERED_BUFFER 377 help 378 Say Y here if you want to build support for Maxim Integrated's 379 MAX44000 ambient and infrared proximity sensor device. 380 381 To compile this driver as a module, choose M here: 382 the module will be called max44000. 383 384config MAX44009 385 tristate "MAX44009 Ambient Light Sensor" 386 depends on I2C 387 select REGMAP_I2C 388 help 389 Say Y here if you want to build support for Maxim Integrated's 390 MAX44009 ambient light sensor device. 391 392 To compile this driver as a module, choose M here: 393 the module will be called max44009. 394 395config NOA1305 396 tristate "ON Semiconductor NOA1305 ambient light sensor" 397 depends on I2C 398 select REGMAP_I2C 399 help 400 Say Y here if you want to build support for the ON Semiconductor 401 NOA1305 ambient light sensor. 402 403 To compile this driver as a module, choose M here: 404 The module will be called noa1305. 405 406config OPT3001 407 tristate "Texas Instruments OPT3001 Light Sensor" 408 depends on I2C 409 help 410 If you say Y or M here, you get support for Texas Instruments 411 OPT3001 Ambient Light Sensor. 412 413 If built as a dynamically linked module, it will be called 414 opt3001. 415 416config PA12203001 417 tristate "TXC PA12203001 light and proximity sensor" 418 depends on I2C 419 select REGMAP_I2C 420 help 421 If you say yes here you get support for the TXC PA12203001 422 ambient light and proximity sensor. 423 424 This driver can also be built as a module. If so, the module 425 will be called pa12203001. 426 427config SI1133 428 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 429 depends on I2C 430 select REGMAP_I2C 431 help 432 Say Y here if you want to build a driver for the Silicon Labs SI1133 433 UV Index Sensor and Ambient Light Sensor chip. 434 435 To compile this driver as a module, choose M here: the module will be 436 called si1133. 437 438config SI1145 439 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 440 depends on I2C 441 select IIO_BUFFER 442 select IIO_TRIGGERED_BUFFER 443 help 444 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 445 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 446 chips. 447 448 To compile this driver as a module, choose M here: the module will be 449 called si1145. 450 451config STK3310 452 tristate "STK3310 ALS and proximity sensor" 453 depends on I2C 454 select REGMAP_I2C 455 help 456 Say yes here to get support for the Sensortek STK3310 ambient light 457 and proximity sensor. The STK3311 model is also supported by this 458 driver. 459 460 Choosing M will build the driver as a module. If so, the module 461 will be called stk3310. 462 463config ST_UVIS25 464 tristate "STMicroelectronics UVIS25 sensor driver" 465 depends on (I2C || SPI) 466 select IIO_BUFFER 467 select IIO_TRIGGERED_BUFFER 468 select ST_UVIS25_I2C if (I2C) 469 select ST_UVIS25_SPI if (SPI_MASTER) 470 help 471 Say yes here to build support for STMicroelectronics UVIS25 472 uv sensor 473 474 To compile this driver as a module, choose M here: the module 475 will be called st_uvis25. 476 477config ST_UVIS25_I2C 478 tristate 479 depends on ST_UVIS25 480 select REGMAP_I2C 481 482config ST_UVIS25_SPI 483 tristate 484 depends on ST_UVIS25 485 select REGMAP_SPI 486 487config TCS3414 488 tristate "TAOS TCS3414 digital color sensor" 489 depends on I2C 490 select IIO_BUFFER 491 select IIO_TRIGGERED_BUFFER 492 help 493 If you say yes here you get support for the TAOS TCS3414 494 family of digital color sensors. 495 496 This driver can also be built as a module. If so, the module 497 will be called tcs3414. 498 499config TCS3472 500 tristate "TAOS TCS3472 color light-to-digital converter" 501 depends on I2C 502 select IIO_BUFFER 503 select IIO_TRIGGERED_BUFFER 504 help 505 If you say yes here you get support for the TAOS TCS3472 506 family of color light-to-digital converters with IR filter. 507 508 This driver can also be built as a module. If so, the module 509 will be called tcs3472. 510 511config SENSORS_TSL2563 512 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 513 depends on I2C 514 help 515 If you say yes here you get support for the Taos TSL2560, 516 TSL2561, TSL2562 and TSL2563 ambient light sensors. 517 518 This driver can also be built as a module. If so, the module 519 will be called tsl2563. 520 521config TSL2583 522 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 523 depends on I2C 524 help 525 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 526 Access ALS data via iio, sysfs. 527 528config TSL2591 529 tristate "TAOS TSL2591 ambient light sensor" 530 depends on I2C 531 help 532 Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor, 533 featuring channels for combined visible + IR intensity and lux illuminance. 534 Access data via iio and sysfs. Supports iio_events. 535 536 To compile this driver as a module, select M: the 537 module will be called tsl2591. 538 539config TSL2772 540 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 541 depends on I2C 542 help 543 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 544 tmd2672, tsl2772, tmd2772 devices. 545 Provides iio_events and direct access via sysfs. 546 547config TSL4531 548 tristate "TAOS TSL4531 ambient light sensors" 549 depends on I2C 550 help 551 Say Y here if you want to build a driver for the TAOS TSL4531 family 552 of ambient light sensors with direct lux output. 553 554 To compile this driver as a module, choose M here: the 555 module will be called tsl4531. 556 557config US5182D 558 tristate "UPISEMI light and proximity sensor" 559 depends on I2C 560 help 561 If you say yes here you get support for the UPISEMI US5182D 562 ambient light and proximity sensor. 563 564 This driver can also be built as a module. If so, the module 565 will be called us5182d. 566 567config VCNL4000 568 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 569 select IIO_BUFFER 570 select IIO_TRIGGERED_BUFFER 571 depends on I2C 572 help 573 Say Y here if you want to build a driver for the Vishay VCNL4000, 574 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 575 sensor. 576 577 To compile this driver as a module, choose M here: the 578 module will be called vcnl4000. 579 580config VCNL4035 581 tristate "VCNL4035 combined ALS and proximity sensor" 582 select IIO_BUFFER 583 select IIO_TRIGGERED_BUFFER 584 select REGMAP_I2C 585 depends on I2C 586 help 587 Say Y here if you want to build a driver for the Vishay VCNL4035, 588 combined ambient light (ALS) and proximity sensor. Currently only ALS 589 function is available. 590 591 To compile this driver as a module, choose M here: the 592 module will be called vcnl4035. 593 594config VEML6030 595 tristate "VEML6030 ambient light sensor" 596 select REGMAP_I2C 597 depends on I2C 598 help 599 Say Y here if you want to build a driver for the Vishay VEML6030 600 ambient light sensor (ALS). 601 602 To compile this driver as a module, choose M here: the 603 module will be called veml6030. 604 605config VEML6070 606 tristate "VEML6070 UV A light sensor" 607 depends on I2C 608 help 609 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 610 light sensor. 611 612 To compile this driver as a module, choose M here: the 613 module will be called veml6070. 614 615config VL6180 616 tristate "VL6180 ALS, range and proximity sensor" 617 depends on I2C 618 help 619 Say Y here if you want to build a driver for the STMicroelectronics 620 VL6180 combined ambient light, range and proximity sensor. 621 622 To compile this driver as a module, choose M here: the 623 module will be called vl6180. 624 625config ZOPT2201 626 tristate "ZOPT2201 ALS and UV B sensor" 627 depends on I2C 628 help 629 Say Y here if you want to build a driver for the IDT 630 ZOPT2201 ambient light and UV B sensor. 631 632 To compile this driver as a module, choose M here: the 633 module will be called zopt2201. 634 635endmenu 636