1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config ADUX1020 36 tristate "ADUX1020 photometric sensor" 37 select REGMAP_I2C 38 depends on I2C 39 help 40 Say Y here if you want to build a driver for the Analog Devices 41 ADUX1020 photometric sensor. 42 43 To compile this driver as a module, choose M here: the 44 module will be called adux1020. 45 46config AL3320A 47 tristate "AL3320A ambient light sensor" 48 depends on I2C 49 help 50 Say Y here if you want to build a driver for the Dyna Image AL3320A 51 ambient light sensor. 52 53 To compile this driver as a module, choose M here: the 54 module will be called al3320a. 55 56config APDS9300 57 tristate "APDS9300 ambient light sensor" 58 depends on I2C 59 help 60 Say Y here if you want to build a driver for the Avago APDS9300 61 ambient light sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called apds9300. 65 66config APDS9960 67 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 68 select REGMAP_I2C 69 select IIO_BUFFER 70 select IIO_KFIFO_BUF 71 depends on I2C 72 help 73 Say Y here to build I2C interface support for the Avago 74 APDS9960 gesture/RGB/ALS/proximity sensor. 75 76 To compile this driver as a module, choose M here: the 77 module will be called apds9960 78 79config BH1750 80 tristate "ROHM BH1750 ambient light sensor" 81 depends on I2C 82 help 83 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 84 BH1750, BH1751 ambient light sensors. 85 86 To compile this driver as a module, choose M here: the module will 87 be called bh1750. 88 89config BH1780 90 tristate "ROHM BH1780 ambient light sensor" 91 depends on I2C 92 help 93 Say Y here to build support for the ROHM BH1780GLI ambient 94 light sensor. 95 96 To compile this driver as a module, choose M here: the module will 97 be called bh1780. 98 99config CM32181 100 depends on I2C 101 tristate "CM32181 driver" 102 help 103 Say Y here if you use cm32181. 104 This option enables ambient light sensor using 105 Capella cm32181 device driver. 106 107 To compile this driver as a module, choose M here: 108 the module will be called cm32181. 109 110config CM3232 111 depends on I2C 112 tristate "CM3232 ambient light sensor" 113 help 114 Say Y here if you use cm3232. 115 This option enables ambient light sensor using 116 Capella Microsystems cm3232 device driver. 117 118 To compile this driver as a module, choose M here: 119 the module will be called cm3232. 120 121config CM3323 122 depends on I2C 123 tristate "Capella CM3323 color light sensor" 124 help 125 Say Y here if you want to build a driver for Capella CM3323 126 color sensor. 127 128 To compile this driver as a module, choose M here: the module will 129 be called cm3323. 130 131config CM3605 132 tristate "Capella CM3605 ambient light and proximity sensor" 133 depends on OF 134 help 135 Say Y here if you want to build a driver for Capella CM3605 136 ambient light and short range proximity sensor. 137 138 To compile this driver as a module, choose M here: the module will 139 be called cm3605. 140 141config CM36651 142 depends on I2C 143 tristate "CM36651 driver" 144 help 145 Say Y here if you use cm36651. 146 This option enables proximity & RGB sensor using 147 Capella cm36651 device driver. 148 149 To compile this driver as a module, choose M here: 150 the module will be called cm36651. 151 152config IIO_CROS_EC_LIGHT_PROX 153 tristate "ChromeOS EC Light and Proximity Sensors" 154 depends on IIO_CROS_EC_SENSORS_CORE 155 help 156 Say Y here if you use the light and proximity sensors 157 presented by the ChromeOS EC Sensor hub. 158 159 To compile this driver as a module, choose M here: 160 the module will be called cros_ec_light_prox. 161 162config GP2AP020A00F 163 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 164 depends on I2C 165 select REGMAP_I2C 166 select IIO_BUFFER 167 select IIO_TRIGGERED_BUFFER 168 select IRQ_WORK 169 help 170 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 171 hooked to an I2C bus. 172 173 To compile this driver as a module, choose M here: the 174 module will be called gp2ap020a00f. 175 176config SENSORS_ISL29018 177 tristate "Intersil 29018 light and proximity sensor" 178 depends on I2C 179 select REGMAP_I2C 180 default n 181 help 182 If you say yes here you get support for ambient light sensing and 183 proximity infrared sensing from Intersil ISL29018. 184 This driver will provide the measurements of ambient light intensity 185 in lux, proximity infrared sensing and normal infrared sensing. 186 Data from sensor is accessible via sysfs. 187 188config SENSORS_ISL29028 189 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 190 depends on I2C 191 select REGMAP_I2C 192 help 193 Provides driver for the Intersil's ISL29028 device. 194 This driver supports the sysfs interface to get the ALS, IR intensity, 195 Proximity value via iio. The ISL29028 provides the concurrent sensing 196 of ambient light and proximity. 197 198config ISL29125 199 tristate "Intersil ISL29125 digital color light sensor" 200 depends on I2C 201 select IIO_BUFFER 202 select IIO_TRIGGERED_BUFFER 203 help 204 Say Y here if you want to build a driver for the Intersil ISL29125 205 RGB light sensor for I2C. 206 207 To compile this driver as a module, choose M here: the module will be 208 called isl29125. 209 210config HID_SENSOR_ALS 211 depends on HID_SENSOR_HUB 212 select IIO_BUFFER 213 select IIO_TRIGGERED_BUFFER 214 select HID_SENSOR_IIO_COMMON 215 select HID_SENSOR_IIO_TRIGGER 216 tristate "HID ALS" 217 help 218 Say yes here to build support for the HID SENSOR 219 Ambient light sensor. 220 221 To compile this driver as a module, choose M here: the 222 module will be called hid-sensor-als. 223 224config HID_SENSOR_PROX 225 depends on HID_SENSOR_HUB 226 select IIO_BUFFER 227 select IIO_TRIGGERED_BUFFER 228 select HID_SENSOR_IIO_COMMON 229 select HID_SENSOR_IIO_TRIGGER 230 tristate "HID PROX" 231 help 232 Say yes here to build support for the HID SENSOR 233 Proximity sensor. 234 235 To compile this driver as a module, choose M here: the 236 module will be called hid-sensor-prox. 237 238config JSA1212 239 tristate "JSA1212 ALS and proximity sensor driver" 240 depends on I2C 241 select REGMAP_I2C 242 help 243 Say Y here if you want to build a IIO driver for JSA1212 244 proximity & ALS sensor device. 245 246 To compile this driver as a module, choose M here: 247 the module will be called jsa1212. 248 249config RPR0521 250 tristate "ROHM RPR0521 ALS and proximity sensor driver" 251 depends on I2C 252 select REGMAP_I2C 253 help 254 Say Y here if you want to build support for ROHM's RPR0521 255 ambient light and proximity sensor device. 256 257 To compile this driver as a module, choose M here: 258 the module will be called rpr0521. 259 260config SENSORS_LM3533 261 tristate "LM3533 ambient light sensor" 262 depends on MFD_LM3533 263 help 264 If you say yes here you get support for the ambient light sensor 265 interface on National Semiconductor / TI LM3533 Lighting Power 266 chips. 267 268 The sensor interface can be used to control the LEDs and backlights 269 of the chip through defining five light zones and three sets of 270 corresponding output-current values. 271 272 The driver provides raw and mean adc readings along with the current 273 light zone through sysfs. A threshold event can be generated on zone 274 changes. The ALS-control output values can be set per zone for the 275 three current output channels. 276 277config LTR501 278 tristate "LTR-501ALS-01 light sensor" 279 depends on I2C 280 select REGMAP_I2C 281 select IIO_BUFFER 282 select IIO_TRIGGERED_BUFFER 283 help 284 If you say yes here you get support for the Lite-On LTR-501ALS-01 285 ambient light and proximity sensor. This driver also supports LTR-559 286 ALS/PS or LTR-301 ALS sensors. 287 288 This driver can also be built as a module. If so, the module 289 will be called ltr501. 290 291config LV0104CS 292 tristate "LV0104CS Ambient Light Sensor" 293 depends on I2C 294 help 295 Say Y here if you want to build support for the On Semiconductor 296 LV0104CS ambient light sensor. 297 298 To compile this driver as a module, choose M here: 299 the module will be called lv0104cs. 300 301config MAX44000 302 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 303 depends on I2C 304 select REGMAP_I2C 305 select IIO_BUFFER 306 select IIO_TRIGGERED_BUFFER 307 help 308 Say Y here if you want to build support for Maxim Integrated's 309 MAX44000 ambient and infrared proximity sensor device. 310 311 To compile this driver as a module, choose M here: 312 the module will be called max44000. 313 314config MAX44009 315 tristate "MAX44009 Ambient Light Sensor" 316 depends on I2C 317 select REGMAP_I2C 318 help 319 Say Y here if you want to build support for Maxim Integrated's 320 MAX44009 ambient light sensor device. 321 322 To compile this driver as a module, choose M here: 323 the module will be called max44009. 324 325config NOA1305 326 tristate "ON Semiconductor NOA1305 ambient light sensor" 327 depends on I2C 328 select REGMAP_I2C 329 help 330 Say Y here if you want to build support for the ON Semiconductor 331 NOA1305 ambient light sensor. 332 333 To compile this driver as a module, choose M here: 334 The module will be called noa1305. 335 336config OPT3001 337 tristate "Texas Instruments OPT3001 Light Sensor" 338 depends on I2C 339 help 340 If you say Y or M here, you get support for Texas Instruments 341 OPT3001 Ambient Light Sensor. 342 343 If built as a dynamically linked module, it will be called 344 opt3001. 345 346config PA12203001 347 tristate "TXC PA12203001 light and proximity sensor" 348 depends on I2C 349 select REGMAP_I2C 350 help 351 If you say yes here you get support for the TXC PA12203001 352 ambient light and proximity sensor. 353 354 This driver can also be built as a module. If so, the module 355 will be called pa12203001. 356 357config SI1133 358 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 359 depends on I2C 360 select REGMAP_I2C 361 help 362 Say Y here if you want to build a driver for the Silicon Labs SI1133 363 UV Index Sensor and Ambient Light Sensor chip. 364 365 To compile this driver as a module, choose M here: the module will be 366 called si1133. 367 368config SI1145 369 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 370 depends on I2C 371 select IIO_BUFFER 372 select IIO_TRIGGERED_BUFFER 373 help 374 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 375 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 376 chips. 377 378 To compile this driver as a module, choose M here: the module will be 379 called si1145. 380 381config STK3310 382 tristate "STK3310 ALS and proximity sensor" 383 depends on I2C 384 select REGMAP_I2C 385 help 386 Say yes here to get support for the Sensortek STK3310 ambient light 387 and proximity sensor. The STK3311 model is also supported by this 388 driver. 389 390 Choosing M will build the driver as a module. If so, the module 391 will be called stk3310. 392 393config ST_UVIS25 394 tristate "STMicroelectronics UVIS25 sensor driver" 395 depends on (I2C || SPI) 396 select IIO_BUFFER 397 select IIO_TRIGGERED_BUFFER 398 select ST_UVIS25_I2C if (I2C) 399 select ST_UVIS25_SPI if (SPI_MASTER) 400 help 401 Say yes here to build support for STMicroelectronics UVIS25 402 uv sensor 403 404 To compile this driver as a module, choose M here: the module 405 will be called st_uvis25. 406 407config ST_UVIS25_I2C 408 tristate 409 depends on ST_UVIS25 410 select REGMAP_I2C 411 412config ST_UVIS25_SPI 413 tristate 414 depends on ST_UVIS25 415 select REGMAP_SPI 416 417config TCS3414 418 tristate "TAOS TCS3414 digital color sensor" 419 depends on I2C 420 select IIO_BUFFER 421 select IIO_TRIGGERED_BUFFER 422 help 423 If you say yes here you get support for the TAOS TCS3414 424 family of digital color sensors. 425 426 This driver can also be built as a module. If so, the module 427 will be called tcs3414. 428 429config TCS3472 430 tristate "TAOS TCS3472 color light-to-digital converter" 431 depends on I2C 432 select IIO_BUFFER 433 select IIO_TRIGGERED_BUFFER 434 help 435 If you say yes here you get support for the TAOS TCS3472 436 family of color light-to-digital converters with IR filter. 437 438 This driver can also be built as a module. If so, the module 439 will be called tcs3472. 440 441config SENSORS_TSL2563 442 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 443 depends on I2C 444 help 445 If you say yes here you get support for the Taos TSL2560, 446 TSL2561, TSL2562 and TSL2563 ambient light sensors. 447 448 This driver can also be built as a module. If so, the module 449 will be called tsl2563. 450 451config TSL2583 452 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 453 depends on I2C 454 help 455 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 456 Access ALS data via iio, sysfs. 457 458config TSL2772 459 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 460 depends on I2C 461 help 462 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 463 tmd2672, tsl2772, tmd2772 devices. 464 Provides iio_events and direct access via sysfs. 465 466config TSL4531 467 tristate "TAOS TSL4531 ambient light sensors" 468 depends on I2C 469 help 470 Say Y here if you want to build a driver for the TAOS TSL4531 family 471 of ambient light sensors with direct lux output. 472 473 To compile this driver as a module, choose M here: the 474 module will be called tsl4531. 475 476config US5182D 477 tristate "UPISEMI light and proximity sensor" 478 depends on I2C 479 help 480 If you say yes here you get support for the UPISEMI US5182D 481 ambient light and proximity sensor. 482 483 This driver can also be built as a module. If so, the module 484 will be called us5182d. 485 486config VCNL4000 487 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 488 depends on I2C 489 help 490 Say Y here if you want to build a driver for the Vishay VCNL4000, 491 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 492 sensor. 493 494 To compile this driver as a module, choose M here: the 495 module will be called vcnl4000. 496 497config VCNL4035 498 tristate "VCNL4035 combined ALS and proximity sensor" 499 select IIO_TRIGGERED_BUFFER 500 select REGMAP_I2C 501 depends on I2C 502 help 503 Say Y here if you want to build a driver for the Vishay VCNL4035, 504 combined ambient light (ALS) and proximity sensor. Currently only ALS 505 function is available. 506 507 To compile this driver as a module, choose M here: the 508 module will be called vcnl4035. 509 510config VEML6030 511 tristate "VEML6030 ambient light sensor" 512 select REGMAP_I2C 513 depends on I2C 514 help 515 Say Y here if you want to build a driver for the Vishay VEML6030 516 ambient light sensor (ALS). 517 518 To compile this driver as a module, choose M here: the 519 module will be called veml6030. 520 521config VEML6070 522 tristate "VEML6070 UV A light sensor" 523 depends on I2C 524 help 525 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 526 light sensor. 527 528 To compile this driver as a module, choose M here: the 529 module will be called veml6070. 530 531config VL6180 532 tristate "VL6180 ALS, range and proximity sensor" 533 depends on I2C 534 help 535 Say Y here if you want to build a driver for the STMicroelectronics 536 VL6180 combined ambient light, range and proximity sensor. 537 538 To compile this driver as a module, choose M here: the 539 module will be called vl6180. 540 541config ZOPT2201 542 tristate "ZOPT2201 ALS and UV B sensor" 543 depends on I2C 544 help 545 Say Y here if you want to build a driver for the IDT 546 ZOPT2201 ambient light and UV B sensor. 547 548 To compile this driver as a module, choose M here: the 549 module will be called zopt2201. 550 551endmenu 552