1# SPDX-License-Identifier: GPL-2.0-only 2 3# 4# Light sensors 5# 6# When adding new entries keep the list in alphabetical order 7 8menu "Light sensors" 9 10config ACPI_ALS 11 tristate "ACPI Ambient Light Sensor" 12 depends on ACPI 13 select IIO_BUFFER 14 select IIO_TRIGGERED_BUFFER 15 select IIO_KFIFO_BUF 16 help 17 Say Y here if you want to build a driver for the ACPI0008 18 Ambient Light Sensor. 19 20 To compile this driver as a module, choose M here: the module will 21 be called acpi-als. 22 23config ADJD_S311 24 tristate "ADJD-S311-CR999 digital color sensor" 25 select IIO_BUFFER 26 select IIO_TRIGGERED_BUFFER 27 depends on I2C 28 help 29 If you say yes here you get support for the Avago ADJD-S311-CR999 30 digital color light sensor. 31 32 This driver can also be built as a module. If so, the module 33 will be called adjd_s311. 34 35config ADUX1020 36 tristate "ADUX1020 photometric sensor" 37 select REGMAP_I2C 38 depends on I2C 39 help 40 Say Y here if you want to build a driver for the Analog Devices 41 ADUX1020 photometric sensor. 42 43 To compile this driver as a module, choose M here: the 44 module will be called adux1020. 45 46config AL3010 47 tristate "AL3010 ambient light sensor" 48 depends on I2C 49 help 50 Say Y here if you want to build a driver for the Dyna Image AL3010 51 ambient light sensor. 52 53 To compile this driver as a module, choose M here: the 54 module will be called al3010. 55 56config AL3320A 57 tristate "AL3320A ambient light sensor" 58 depends on I2C 59 help 60 Say Y here if you want to build a driver for the Dyna Image AL3320A 61 ambient light sensor. 62 63 To compile this driver as a module, choose M here: the 64 module will be called al3320a. 65 66config APDS9300 67 tristate "APDS9300 ambient light sensor" 68 depends on I2C 69 help 70 Say Y here if you want to build a driver for the Avago APDS9300 71 ambient light sensor. 72 73 To compile this driver as a module, choose M here: the 74 module will be called apds9300. 75 76config APDS9960 77 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" 78 select REGMAP_I2C 79 select IIO_BUFFER 80 select IIO_KFIFO_BUF 81 depends on I2C 82 help 83 Say Y here to build I2C interface support for the Avago 84 APDS9960 gesture/RGB/ALS/proximity sensor. 85 86 To compile this driver as a module, choose M here: the 87 module will be called apds9960 88 89config AS73211 90 tristate "AMS AS73211 XYZ color sensor" 91 depends on I2C 92 select IIO_BUFFER 93 select IIO_TRIGGERED_BUFFER 94 help 95 If you say yes here you get support for the AMS AS73211 96 JENCOLOR(R) Digital XYZ Sensor. 97 98 For triggered measurements, you will need an additional trigger driver 99 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. 100 101 This driver can also be built as a module. If so, the module 102 will be called as73211. 103 104config BH1750 105 tristate "ROHM BH1750 ambient light sensor" 106 depends on I2C 107 help 108 Say Y here to build support for the ROHM BH1710, BH1715, BH1721, 109 BH1750, BH1751 ambient light sensors. 110 111 To compile this driver as a module, choose M here: the module will 112 be called bh1750. 113 114config BH1780 115 tristate "ROHM BH1780 ambient light sensor" 116 depends on I2C 117 help 118 Say Y here to build support for the ROHM BH1780GLI ambient 119 light sensor. 120 121 To compile this driver as a module, choose M here: the module will 122 be called bh1780. 123 124config CM32181 125 depends on I2C 126 tristate "CM32181 driver" 127 help 128 Say Y here if you use cm32181. 129 This option enables ambient light sensor using 130 Capella cm32181 device driver. 131 132 To compile this driver as a module, choose M here: 133 the module will be called cm32181. 134 135config CM3232 136 depends on I2C 137 tristate "CM3232 ambient light sensor" 138 help 139 Say Y here if you use cm3232. 140 This option enables ambient light sensor using 141 Capella Microsystems cm3232 device driver. 142 143 To compile this driver as a module, choose M here: 144 the module will be called cm3232. 145 146config CM3323 147 depends on I2C 148 tristate "Capella CM3323 color light sensor" 149 help 150 Say Y here if you want to build a driver for Capella CM3323 151 color sensor. 152 153 To compile this driver as a module, choose M here: the module will 154 be called cm3323. 155 156config CM3605 157 tristate "Capella CM3605 ambient light and proximity sensor" 158 depends on OF 159 help 160 Say Y here if you want to build a driver for Capella CM3605 161 ambient light and short range proximity sensor. 162 163 To compile this driver as a module, choose M here: the module will 164 be called cm3605. 165 166config CM36651 167 depends on I2C 168 tristate "CM36651 driver" 169 help 170 Say Y here if you use cm36651. 171 This option enables proximity & RGB sensor using 172 Capella cm36651 device driver. 173 174 To compile this driver as a module, choose M here: 175 the module will be called cm36651. 176 177config IIO_CROS_EC_LIGHT_PROX 178 tristate "ChromeOS EC Light and Proximity Sensors" 179 depends on IIO_CROS_EC_SENSORS_CORE 180 help 181 Say Y here if you use the light and proximity sensors 182 presented by the ChromeOS EC Sensor hub. 183 184 To compile this driver as a module, choose M here: 185 the module will be called cros_ec_light_prox. 186 187config GP2AP002 188 tristate "Sharp GP2AP002 Proximity/ALS sensor" 189 depends on I2C 190 select REGMAP 191 help 192 Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip 193 hooked to an I2C bus. 194 195 To compile this driver as a module, choose M here: the 196 module will be called gp2ap002. 197 198config GP2AP020A00F 199 tristate "Sharp GP2AP020A00F Proximity/ALS sensor" 200 depends on I2C 201 select REGMAP_I2C 202 select IIO_BUFFER 203 select IIO_TRIGGERED_BUFFER 204 select IRQ_WORK 205 help 206 Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip 207 hooked to an I2C bus. 208 209 To compile this driver as a module, choose M here: the 210 module will be called gp2ap020a00f. 211 212config IQS621_ALS 213 tristate "Azoteq IQS621/622 ambient light sensors" 214 depends on MFD_IQS62X || COMPILE_TEST 215 help 216 Say Y here if you want to build support for the Azoteq IQS621 217 and IQS622 ambient light sensors. 218 219 To compile this driver as a module, choose M here: the module 220 will be called iqs621-als. 221 222config SENSORS_ISL29018 223 tristate "Intersil 29018 light and proximity sensor" 224 depends on I2C 225 select REGMAP_I2C 226 default n 227 help 228 If you say yes here you get support for ambient light sensing and 229 proximity infrared sensing from Intersil ISL29018. 230 This driver will provide the measurements of ambient light intensity 231 in lux, proximity infrared sensing and normal infrared sensing. 232 Data from sensor is accessible via sysfs. 233 234config SENSORS_ISL29028 235 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" 236 depends on I2C 237 select REGMAP_I2C 238 help 239 Provides driver for the Intersil's ISL29028 device. 240 This driver supports the sysfs interface to get the ALS, IR intensity, 241 Proximity value via iio. The ISL29028 provides the concurrent sensing 242 of ambient light and proximity. 243 244config ISL29125 245 tristate "Intersil ISL29125 digital color light sensor" 246 depends on I2C 247 select IIO_BUFFER 248 select IIO_TRIGGERED_BUFFER 249 help 250 Say Y here if you want to build a driver for the Intersil ISL29125 251 RGB light sensor for I2C. 252 253 To compile this driver as a module, choose M here: the module will be 254 called isl29125. 255 256config HID_SENSOR_ALS 257 depends on HID_SENSOR_HUB 258 select IIO_BUFFER 259 select HID_SENSOR_IIO_COMMON 260 select HID_SENSOR_IIO_TRIGGER 261 tristate "HID ALS" 262 help 263 Say yes here to build support for the HID SENSOR 264 Ambient light sensor. 265 266 To compile this driver as a module, choose M here: the 267 module will be called hid-sensor-als. 268 269config HID_SENSOR_PROX 270 depends on HID_SENSOR_HUB 271 select IIO_BUFFER 272 select HID_SENSOR_IIO_COMMON 273 select HID_SENSOR_IIO_TRIGGER 274 tristate "HID PROX" 275 help 276 Say yes here to build support for the HID SENSOR 277 Proximity sensor. 278 279 To compile this driver as a module, choose M here: the 280 module will be called hid-sensor-prox. 281 282config JSA1212 283 tristate "JSA1212 ALS and proximity sensor driver" 284 depends on I2C 285 select REGMAP_I2C 286 help 287 Say Y here if you want to build a IIO driver for JSA1212 288 proximity & ALS sensor device. 289 290 To compile this driver as a module, choose M here: 291 the module will be called jsa1212. 292 293config RPR0521 294 tristate "ROHM RPR0521 ALS and proximity sensor driver" 295 depends on I2C 296 select REGMAP_I2C 297 help 298 Say Y here if you want to build support for ROHM's RPR0521 299 ambient light and proximity sensor device. 300 301 To compile this driver as a module, choose M here: 302 the module will be called rpr0521. 303 304config SENSORS_LM3533 305 tristate "LM3533 ambient light sensor" 306 depends on MFD_LM3533 307 help 308 If you say yes here you get support for the ambient light sensor 309 interface on National Semiconductor / TI LM3533 Lighting Power 310 chips. 311 312 The sensor interface can be used to control the LEDs and backlights 313 of the chip through defining five light zones and three sets of 314 corresponding output-current values. 315 316 The driver provides raw and mean adc readings along with the current 317 light zone through sysfs. A threshold event can be generated on zone 318 changes. The ALS-control output values can be set per zone for the 319 three current output channels. 320 321config LTR501 322 tristate "LTR-501ALS-01 light sensor" 323 depends on I2C 324 select REGMAP_I2C 325 select IIO_BUFFER 326 select IIO_TRIGGERED_BUFFER 327 help 328 If you say yes here you get support for the Lite-On LTR-501ALS-01 329 ambient light and proximity sensor. This driver also supports LTR-559 330 ALS/PS or LTR-301 ALS sensors. 331 332 This driver can also be built as a module. If so, the module 333 will be called ltr501. 334 335config LV0104CS 336 tristate "LV0104CS Ambient Light Sensor" 337 depends on I2C 338 help 339 Say Y here if you want to build support for the On Semiconductor 340 LV0104CS ambient light sensor. 341 342 To compile this driver as a module, choose M here: 343 the module will be called lv0104cs. 344 345config MAX44000 346 tristate "MAX44000 Ambient and Infrared Proximity Sensor" 347 depends on I2C 348 select REGMAP_I2C 349 select IIO_BUFFER 350 select IIO_TRIGGERED_BUFFER 351 help 352 Say Y here if you want to build support for Maxim Integrated's 353 MAX44000 ambient and infrared proximity sensor device. 354 355 To compile this driver as a module, choose M here: 356 the module will be called max44000. 357 358config MAX44009 359 tristate "MAX44009 Ambient Light Sensor" 360 depends on I2C 361 select REGMAP_I2C 362 help 363 Say Y here if you want to build support for Maxim Integrated's 364 MAX44009 ambient light sensor device. 365 366 To compile this driver as a module, choose M here: 367 the module will be called max44009. 368 369config NOA1305 370 tristate "ON Semiconductor NOA1305 ambient light sensor" 371 depends on I2C 372 select REGMAP_I2C 373 help 374 Say Y here if you want to build support for the ON Semiconductor 375 NOA1305 ambient light sensor. 376 377 To compile this driver as a module, choose M here: 378 The module will be called noa1305. 379 380config OPT3001 381 tristate "Texas Instruments OPT3001 Light Sensor" 382 depends on I2C 383 help 384 If you say Y or M here, you get support for Texas Instruments 385 OPT3001 Ambient Light Sensor. 386 387 If built as a dynamically linked module, it will be called 388 opt3001. 389 390config PA12203001 391 tristate "TXC PA12203001 light and proximity sensor" 392 depends on I2C 393 select REGMAP_I2C 394 help 395 If you say yes here you get support for the TXC PA12203001 396 ambient light and proximity sensor. 397 398 This driver can also be built as a module. If so, the module 399 will be called pa12203001. 400 401config SI1133 402 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" 403 depends on I2C 404 select REGMAP_I2C 405 help 406 Say Y here if you want to build a driver for the Silicon Labs SI1133 407 UV Index Sensor and Ambient Light Sensor chip. 408 409 To compile this driver as a module, choose M here: the module will be 410 called si1133. 411 412config SI1145 413 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" 414 depends on I2C 415 select IIO_BUFFER 416 select IIO_TRIGGERED_BUFFER 417 help 418 Say Y here if you want to build a driver for the Silicon Labs SI1132 or 419 SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor 420 chips. 421 422 To compile this driver as a module, choose M here: the module will be 423 called si1145. 424 425config STK3310 426 tristate "STK3310 ALS and proximity sensor" 427 depends on I2C 428 select REGMAP_I2C 429 help 430 Say yes here to get support for the Sensortek STK3310 ambient light 431 and proximity sensor. The STK3311 model is also supported by this 432 driver. 433 434 Choosing M will build the driver as a module. If so, the module 435 will be called stk3310. 436 437config ST_UVIS25 438 tristate "STMicroelectronics UVIS25 sensor driver" 439 depends on (I2C || SPI) 440 select IIO_BUFFER 441 select IIO_TRIGGERED_BUFFER 442 select ST_UVIS25_I2C if (I2C) 443 select ST_UVIS25_SPI if (SPI_MASTER) 444 help 445 Say yes here to build support for STMicroelectronics UVIS25 446 uv sensor 447 448 To compile this driver as a module, choose M here: the module 449 will be called st_uvis25. 450 451config ST_UVIS25_I2C 452 tristate 453 depends on ST_UVIS25 454 select REGMAP_I2C 455 456config ST_UVIS25_SPI 457 tristate 458 depends on ST_UVIS25 459 select REGMAP_SPI 460 461config TCS3414 462 tristate "TAOS TCS3414 digital color sensor" 463 depends on I2C 464 select IIO_BUFFER 465 select IIO_TRIGGERED_BUFFER 466 help 467 If you say yes here you get support for the TAOS TCS3414 468 family of digital color sensors. 469 470 This driver can also be built as a module. If so, the module 471 will be called tcs3414. 472 473config TCS3472 474 tristate "TAOS TCS3472 color light-to-digital converter" 475 depends on I2C 476 select IIO_BUFFER 477 select IIO_TRIGGERED_BUFFER 478 help 479 If you say yes here you get support for the TAOS TCS3472 480 family of color light-to-digital converters with IR filter. 481 482 This driver can also be built as a module. If so, the module 483 will be called tcs3472. 484 485config SENSORS_TSL2563 486 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" 487 depends on I2C 488 help 489 If you say yes here you get support for the Taos TSL2560, 490 TSL2561, TSL2562 and TSL2563 ambient light sensors. 491 492 This driver can also be built as a module. If so, the module 493 will be called tsl2563. 494 495config TSL2583 496 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" 497 depends on I2C 498 help 499 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. 500 Access ALS data via iio, sysfs. 501 502config TSL2772 503 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" 504 depends on I2C 505 help 506 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, 507 tmd2672, tsl2772, tmd2772 devices. 508 Provides iio_events and direct access via sysfs. 509 510config TSL4531 511 tristate "TAOS TSL4531 ambient light sensors" 512 depends on I2C 513 help 514 Say Y here if you want to build a driver for the TAOS TSL4531 family 515 of ambient light sensors with direct lux output. 516 517 To compile this driver as a module, choose M here: the 518 module will be called tsl4531. 519 520config US5182D 521 tristate "UPISEMI light and proximity sensor" 522 depends on I2C 523 help 524 If you say yes here you get support for the UPISEMI US5182D 525 ambient light and proximity sensor. 526 527 This driver can also be built as a module. If so, the module 528 will be called us5182d. 529 530config VCNL4000 531 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" 532 select IIO_BUFFER 533 select IIO_TRIGGERED_BUFFER 534 depends on I2C 535 help 536 Say Y here if you want to build a driver for the Vishay VCNL4000, 537 VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity 538 sensor. 539 540 To compile this driver as a module, choose M here: the 541 module will be called vcnl4000. 542 543config VCNL4035 544 tristate "VCNL4035 combined ALS and proximity sensor" 545 select IIO_BUFFER 546 select IIO_TRIGGERED_BUFFER 547 select REGMAP_I2C 548 depends on I2C 549 help 550 Say Y here if you want to build a driver for the Vishay VCNL4035, 551 combined ambient light (ALS) and proximity sensor. Currently only ALS 552 function is available. 553 554 To compile this driver as a module, choose M here: the 555 module will be called vcnl4035. 556 557config VEML6030 558 tristate "VEML6030 ambient light sensor" 559 select REGMAP_I2C 560 depends on I2C 561 help 562 Say Y here if you want to build a driver for the Vishay VEML6030 563 ambient light sensor (ALS). 564 565 To compile this driver as a module, choose M here: the 566 module will be called veml6030. 567 568config VEML6070 569 tristate "VEML6070 UV A light sensor" 570 depends on I2C 571 help 572 Say Y here if you want to build a driver for the Vishay VEML6070 UV A 573 light sensor. 574 575 To compile this driver as a module, choose M here: the 576 module will be called veml6070. 577 578config VL6180 579 tristate "VL6180 ALS, range and proximity sensor" 580 depends on I2C 581 help 582 Say Y here if you want to build a driver for the STMicroelectronics 583 VL6180 combined ambient light, range and proximity sensor. 584 585 To compile this driver as a module, choose M here: the 586 module will be called vl6180. 587 588config ZOPT2201 589 tristate "ZOPT2201 ALS and UV B sensor" 590 depends on I2C 591 help 592 Say Y here if you want to build a driver for the IDT 593 ZOPT2201 ambient light and UV B sensor. 594 595 To compile this driver as a module, choose M here: the 596 module will be called zopt2201. 597 598endmenu 599