1 /* 2 * STMicroelectronics st_lsm6dsx i2c controller driver 3 * 4 * i2c controller embedded in lsm6dx series can connect up to four 5 * slave devices using accelerometer sensor as trigger for i2c 6 * read/write operations. Current implementation relies on SLV0 channel 7 * for slave configuration and SLV{1,2,3} to read data and push them into 8 * the hw FIFO 9 * 10 * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> 11 * 12 * Permission to use, copy, modify, and/or distribute this software for any 13 * purpose with or without fee is hereby granted, provided that the above 14 * copyright notice and this permission notice appear in all copies. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 17 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 18 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 19 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 20 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 21 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 22 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 23 * 24 */ 25 #include <linux/module.h> 26 #include <linux/regmap.h> 27 #include <linux/iio/iio.h> 28 #include <linux/iio/sysfs.h> 29 #include <linux/bitfield.h> 30 31 #include "st_lsm6dsx.h" 32 33 #define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3) 34 #define ST_LSM6DSX_SLV_SUB_ADDR(n, base) ((base) + 1 + (n) * 3) 35 #define ST_LSM6DSX_SLV_CONFIG(n, base) ((base) + 2 + (n) * 3) 36 37 #define ST_LS6DSX_READ_OP_MASK GENMASK(2, 0) 38 39 static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = { 40 /* LIS2MDL */ 41 { 42 .i2c_addr = { 0x1e }, 43 .wai = { 44 .addr = 0x4f, 45 .val = 0x40, 46 }, 47 .id = ST_LSM6DSX_ID_MAGN, 48 .odr_table = { 49 .reg = { 50 .addr = 0x60, 51 .mask = GENMASK(3, 2), 52 }, 53 .odr_avl[0] = { 10000, 0x0 }, 54 .odr_avl[1] = { 20000, 0x1 }, 55 .odr_avl[2] = { 50000, 0x2 }, 56 .odr_avl[3] = { 100000, 0x3 }, 57 .odr_len = 4, 58 }, 59 .fs_table = { 60 .fs_avl[0] = { 61 .gain = 1500, 62 .val = 0x0, 63 }, /* 1500 uG/LSB */ 64 .fs_len = 1, 65 }, 66 .temp_comp = { 67 .addr = 0x60, 68 .mask = BIT(7), 69 }, 70 .pwr_table = { 71 .reg = { 72 .addr = 0x60, 73 .mask = GENMASK(1, 0), 74 }, 75 .off_val = 0x2, 76 .on_val = 0x0, 77 }, 78 .off_canc = { 79 .addr = 0x61, 80 .mask = BIT(1), 81 }, 82 .bdu = { 83 .addr = 0x62, 84 .mask = BIT(4), 85 }, 86 .out = { 87 .addr = 0x68, 88 .len = 6, 89 }, 90 }, 91 /* LIS3MDL */ 92 { 93 .i2c_addr = { 0x1e }, 94 .wai = { 95 .addr = 0x0f, 96 .val = 0x3d, 97 }, 98 .id = ST_LSM6DSX_ID_MAGN, 99 .odr_table = { 100 .reg = { 101 .addr = 0x20, 102 .mask = GENMASK(4, 2), 103 }, 104 .odr_avl[0] = { 1000, 0x0 }, 105 .odr_avl[1] = { 2000, 0x1 }, 106 .odr_avl[2] = { 3000, 0x2 }, 107 .odr_avl[3] = { 5000, 0x3 }, 108 .odr_avl[4] = { 10000, 0x4 }, 109 .odr_avl[5] = { 20000, 0x5 }, 110 .odr_avl[6] = { 40000, 0x6 }, 111 .odr_avl[7] = { 80000, 0x7 }, 112 .odr_len = 8, 113 }, 114 .fs_table = { 115 .reg = { 116 .addr = 0x21, 117 .mask = GENMASK(6, 5), 118 }, 119 .fs_avl[0] = { 120 .gain = 146, 121 .val = 0x00, 122 }, /* 4000 uG/LSB */ 123 .fs_avl[1] = { 124 .gain = 292, 125 .val = 0x01, 126 }, /* 8000 uG/LSB */ 127 .fs_avl[2] = { 128 .gain = 438, 129 .val = 0x02, 130 }, /* 12000 uG/LSB */ 131 .fs_avl[3] = { 132 .gain = 584, 133 .val = 0x03, 134 }, /* 16000 uG/LSB */ 135 .fs_len = 4, 136 }, 137 .pwr_table = { 138 .reg = { 139 .addr = 0x22, 140 .mask = GENMASK(1, 0), 141 }, 142 .off_val = 0x2, 143 .on_val = 0x0, 144 }, 145 .bdu = { 146 .addr = 0x24, 147 .mask = BIT(6), 148 }, 149 .out = { 150 .addr = 0x28, 151 .len = 6, 152 }, 153 }, 154 }; 155 156 static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) 157 { 158 struct st_lsm6dsx_sensor *sensor; 159 u32 odr, timeout; 160 161 sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); 162 odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500; 163 /* set 10ms as minimum timeout for i2c slave configuration */ 164 timeout = max_t(u32, 2000000U / odr + 1, 10); 165 msleep(timeout); 166 } 167 168 /* 169 * st_lsm6dsx_shub_read_output - read i2c controller register 170 * 171 * Read st_lsm6dsx i2c controller register 172 */ 173 int st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data, int len) 174 { 175 const struct st_lsm6dsx_shub_settings *hub_settings; 176 int err; 177 178 mutex_lock(&hw->page_lock); 179 180 hub_settings = &hw->settings->shub_settings; 181 if (hub_settings->shub_out.sec_page) { 182 err = st_lsm6dsx_set_page(hw, true); 183 if (err < 0) 184 goto out; 185 } 186 187 err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr, 188 data, len); 189 190 if (hub_settings->shub_out.sec_page) 191 st_lsm6dsx_set_page(hw, false); 192 out: 193 mutex_unlock(&hw->page_lock); 194 195 return err; 196 } 197 198 /* 199 * st_lsm6dsx_shub_write_reg - write i2c controller register 200 * 201 * Write st_lsm6dsx i2c controller register 202 */ 203 static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr, 204 u8 *data, int len) 205 { 206 int err; 207 208 mutex_lock(&hw->page_lock); 209 err = st_lsm6dsx_set_page(hw, true); 210 if (err < 0) 211 goto out; 212 213 err = regmap_bulk_write(hw->regmap, addr, data, len); 214 215 st_lsm6dsx_set_page(hw, false); 216 out: 217 mutex_unlock(&hw->page_lock); 218 219 return err; 220 } 221 222 static int 223 st_lsm6dsx_shub_write_reg_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, 224 u8 mask, u8 val) 225 { 226 int err; 227 228 mutex_lock(&hw->page_lock); 229 err = st_lsm6dsx_set_page(hw, true); 230 if (err < 0) 231 goto out; 232 233 err = regmap_update_bits(hw->regmap, addr, mask, val); 234 235 st_lsm6dsx_set_page(hw, false); 236 out: 237 mutex_unlock(&hw->page_lock); 238 239 return err; 240 } 241 242 static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor, 243 bool enable) 244 { 245 const struct st_lsm6dsx_shub_settings *hub_settings; 246 struct st_lsm6dsx_hw *hw = sensor->hw; 247 unsigned int data; 248 int err; 249 250 /* enable acc sensor as trigger */ 251 err = st_lsm6dsx_sensor_set_enable(sensor, enable); 252 if (err < 0) 253 return err; 254 255 mutex_lock(&hw->page_lock); 256 257 hub_settings = &hw->settings->shub_settings; 258 if (hub_settings->master_en.sec_page) { 259 err = st_lsm6dsx_set_page(hw, true); 260 if (err < 0) 261 goto out; 262 } 263 264 data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask); 265 err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr, 266 hub_settings->master_en.mask, data); 267 268 if (hub_settings->master_en.sec_page) 269 st_lsm6dsx_set_page(hw, false); 270 out: 271 mutex_unlock(&hw->page_lock); 272 273 return err; 274 } 275 276 /* 277 * st_lsm6dsx_shub_read - read data from slave device register 278 * 279 * Read data from slave device register. SLV0 is used for 280 * one-shot read operation 281 */ 282 static int 283 st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, 284 u8 *data, int len) 285 { 286 const struct st_lsm6dsx_shub_settings *hub_settings; 287 u8 config[3], slv_addr, slv_config = 0; 288 struct st_lsm6dsx_hw *hw = sensor->hw; 289 const struct st_lsm6dsx_reg *aux_sens; 290 int err; 291 292 hub_settings = &hw->settings->shub_settings; 293 slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); 294 aux_sens = &hw->settings->shub_settings.aux_sens; 295 /* do not overwrite aux_sens */ 296 if (slv_addr + 2 == aux_sens->addr) 297 slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask); 298 299 config[0] = (sensor->ext_info.addr << 1) | 1; 300 config[1] = addr; 301 config[2] = (len & ST_LS6DSX_READ_OP_MASK) | slv_config; 302 303 err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 304 sizeof(config)); 305 if (err < 0) 306 return err; 307 308 err = st_lsm6dsx_shub_master_enable(sensor, true); 309 if (err < 0) 310 return err; 311 312 st_lsm6dsx_shub_wait_complete(hw); 313 314 err = st_lsm6dsx_shub_read_output(hw, data, 315 len & ST_LS6DSX_READ_OP_MASK); 316 if (err < 0) 317 return err; 318 319 st_lsm6dsx_shub_master_enable(sensor, false); 320 321 config[0] = hub_settings->pause; 322 config[1] = 0; 323 config[2] = slv_config; 324 return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 325 sizeof(config)); 326 } 327 328 /* 329 * st_lsm6dsx_shub_write - write data to slave device register 330 * 331 * Write data from slave device register. SLV0 is used for 332 * one-shot write operation 333 */ 334 static int 335 st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr, 336 u8 *data, int len) 337 { 338 const struct st_lsm6dsx_shub_settings *hub_settings; 339 struct st_lsm6dsx_hw *hw = sensor->hw; 340 u8 config[2], slv_addr; 341 int err, i; 342 343 hub_settings = &hw->settings->shub_settings; 344 if (hub_settings->wr_once.addr) { 345 unsigned int data; 346 347 data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask); 348 err = st_lsm6dsx_shub_write_reg_with_mask(hw, 349 hub_settings->wr_once.addr, 350 hub_settings->wr_once.mask, 351 data); 352 if (err < 0) 353 return err; 354 } 355 356 slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); 357 config[0] = sensor->ext_info.addr << 1; 358 for (i = 0 ; i < len; i++) { 359 config[1] = addr + i; 360 361 err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 362 sizeof(config)); 363 if (err < 0) 364 return err; 365 366 err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr, 367 &data[i], 1); 368 if (err < 0) 369 return err; 370 371 err = st_lsm6dsx_shub_master_enable(sensor, true); 372 if (err < 0) 373 return err; 374 375 st_lsm6dsx_shub_wait_complete(hw); 376 377 st_lsm6dsx_shub_master_enable(sensor, false); 378 } 379 380 config[0] = hub_settings->pause; 381 config[1] = 0; 382 return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config)); 383 } 384 385 static int 386 st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor, 387 u8 addr, u8 mask, u8 val) 388 { 389 int err; 390 u8 data; 391 392 err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data)); 393 if (err < 0) 394 return err; 395 396 data = ((data & ~mask) | (val << __ffs(mask) & mask)); 397 398 return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data)); 399 } 400 401 static int 402 st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor, 403 u32 odr, u16 *val) 404 { 405 const struct st_lsm6dsx_ext_dev_settings *settings; 406 int i; 407 408 settings = sensor->ext_info.settings; 409 for (i = 0; i < settings->odr_table.odr_len; i++) { 410 if (settings->odr_table.odr_avl[i].milli_hz == odr) 411 break; 412 } 413 414 if (i == settings->odr_table.odr_len) 415 return -EINVAL; 416 417 *val = settings->odr_table.odr_avl[i].val; 418 return 0; 419 } 420 421 static int 422 st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u32 odr) 423 { 424 const struct st_lsm6dsx_ext_dev_settings *settings; 425 u16 val; 426 int err; 427 428 err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val); 429 if (err < 0) 430 return err; 431 432 settings = sensor->ext_info.settings; 433 return st_lsm6dsx_shub_write_with_mask(sensor, 434 settings->odr_table.reg.addr, 435 settings->odr_table.reg.mask, 436 val); 437 } 438 439 /* use SLV{1,2,3} for FIFO read operations */ 440 static int 441 st_lsm6dsx_shub_config_channels(struct st_lsm6dsx_sensor *sensor, 442 bool enable) 443 { 444 const struct st_lsm6dsx_shub_settings *hub_settings; 445 const struct st_lsm6dsx_ext_dev_settings *settings; 446 u8 config[9] = {}, enable_mask, slv_addr; 447 struct st_lsm6dsx_hw *hw = sensor->hw; 448 struct st_lsm6dsx_sensor *cur_sensor; 449 int i, j = 0; 450 451 hub_settings = &hw->settings->shub_settings; 452 if (enable) 453 enable_mask = hw->enable_mask | BIT(sensor->id); 454 else 455 enable_mask = hw->enable_mask & ~BIT(sensor->id); 456 457 for (i = ST_LSM6DSX_ID_EXT0; i <= ST_LSM6DSX_ID_EXT2; i++) { 458 if (!hw->iio_devs[i]) 459 continue; 460 461 cur_sensor = iio_priv(hw->iio_devs[i]); 462 if (!(enable_mask & BIT(cur_sensor->id))) 463 continue; 464 465 settings = cur_sensor->ext_info.settings; 466 config[j] = (sensor->ext_info.addr << 1) | 1; 467 config[j + 1] = settings->out.addr; 468 config[j + 2] = (settings->out.len & ST_LS6DSX_READ_OP_MASK) | 469 hub_settings->batch_en; 470 j += 3; 471 } 472 473 slv_addr = ST_LSM6DSX_SLV_ADDR(1, hub_settings->slv0_addr); 474 return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 475 sizeof(config)); 476 } 477 478 int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable) 479 { 480 const struct st_lsm6dsx_ext_dev_settings *settings; 481 int err; 482 483 err = st_lsm6dsx_shub_config_channels(sensor, enable); 484 if (err < 0) 485 return err; 486 487 settings = sensor->ext_info.settings; 488 if (enable) { 489 err = st_lsm6dsx_shub_set_odr(sensor, 490 sensor->ext_info.slv_odr); 491 if (err < 0) 492 return err; 493 } else { 494 err = st_lsm6dsx_shub_write_with_mask(sensor, 495 settings->odr_table.reg.addr, 496 settings->odr_table.reg.mask, 0); 497 if (err < 0) 498 return err; 499 } 500 501 if (settings->pwr_table.reg.addr) { 502 u8 val; 503 504 val = enable ? settings->pwr_table.on_val 505 : settings->pwr_table.off_val; 506 err = st_lsm6dsx_shub_write_with_mask(sensor, 507 settings->pwr_table.reg.addr, 508 settings->pwr_table.reg.mask, val); 509 if (err < 0) 510 return err; 511 } 512 513 return st_lsm6dsx_shub_master_enable(sensor, enable); 514 } 515 516 static int 517 st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor, 518 struct iio_chan_spec const *ch, 519 int *val) 520 { 521 int err, delay, len; 522 u8 data[4]; 523 524 err = st_lsm6dsx_shub_set_enable(sensor, true); 525 if (err < 0) 526 return err; 527 528 delay = 1000000000 / sensor->ext_info.slv_odr; 529 usleep_range(delay, 2 * delay); 530 531 len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3); 532 err = st_lsm6dsx_shub_read(sensor, ch->address, data, len); 533 if (err < 0) 534 return err; 535 536 err = st_lsm6dsx_shub_set_enable(sensor, false); 537 if (err < 0) 538 return err; 539 540 switch (len) { 541 case 2: 542 *val = (s16)le16_to_cpu(*((__le16 *)data)); 543 break; 544 default: 545 return -EINVAL; 546 } 547 548 return IIO_VAL_INT; 549 } 550 551 static int 552 st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev, 553 struct iio_chan_spec const *ch, 554 int *val, int *val2, long mask) 555 { 556 struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); 557 int ret; 558 559 switch (mask) { 560 case IIO_CHAN_INFO_RAW: 561 ret = iio_device_claim_direct_mode(iio_dev); 562 if (ret) 563 break; 564 565 ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val); 566 iio_device_release_direct_mode(iio_dev); 567 break; 568 case IIO_CHAN_INFO_SAMP_FREQ: 569 *val = sensor->ext_info.slv_odr / 1000; 570 *val2 = (sensor->ext_info.slv_odr % 1000) * 1000; 571 ret = IIO_VAL_INT_PLUS_MICRO; 572 break; 573 case IIO_CHAN_INFO_SCALE: 574 *val = 0; 575 *val2 = sensor->gain; 576 ret = IIO_VAL_INT_PLUS_MICRO; 577 break; 578 default: 579 ret = -EINVAL; 580 break; 581 } 582 583 return ret; 584 } 585 586 static int 587 st_lsm6dsx_shub_set_full_scale(struct st_lsm6dsx_sensor *sensor, 588 u32 gain) 589 { 590 const struct st_lsm6dsx_fs_table_entry *fs_table; 591 int i, err; 592 593 fs_table = &sensor->ext_info.settings->fs_table; 594 if (!fs_table->reg.addr) 595 return -ENOTSUPP; 596 597 for (i = 0; i < fs_table->fs_len; i++) { 598 if (fs_table->fs_avl[i].gain == gain) 599 break; 600 } 601 602 if (i == fs_table->fs_len) 603 return -EINVAL; 604 605 err = st_lsm6dsx_shub_write_with_mask(sensor, fs_table->reg.addr, 606 fs_table->reg.mask, 607 fs_table->fs_avl[i].val); 608 if (err < 0) 609 return err; 610 611 sensor->gain = gain; 612 613 return 0; 614 } 615 616 static int 617 st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev, 618 struct iio_chan_spec const *chan, 619 int val, int val2, long mask) 620 { 621 struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); 622 int err; 623 624 err = iio_device_claim_direct_mode(iio_dev); 625 if (err) 626 return err; 627 628 switch (mask) { 629 case IIO_CHAN_INFO_SAMP_FREQ: { 630 u16 data; 631 632 val = val * 1000 + val2 / 1000; 633 err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data); 634 if (!err) { 635 struct st_lsm6dsx_hw *hw = sensor->hw; 636 struct st_lsm6dsx_sensor *ref_sensor; 637 u8 odr_val; 638 int odr; 639 640 ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); 641 odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val); 642 if (odr < 0) { 643 err = odr; 644 goto release; 645 } 646 647 sensor->ext_info.slv_odr = val; 648 sensor->odr = odr; 649 } 650 break; 651 } 652 case IIO_CHAN_INFO_SCALE: 653 err = st_lsm6dsx_shub_set_full_scale(sensor, val2); 654 break; 655 default: 656 err = -EINVAL; 657 break; 658 } 659 660 release: 661 iio_device_release_direct_mode(iio_dev); 662 663 return err; 664 } 665 666 static ssize_t 667 st_lsm6dsx_shub_sampling_freq_avail(struct device *dev, 668 struct device_attribute *attr, 669 char *buf) 670 { 671 struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); 672 const struct st_lsm6dsx_ext_dev_settings *settings; 673 int i, len = 0; 674 675 settings = sensor->ext_info.settings; 676 for (i = 0; i < settings->odr_table.odr_len; i++) { 677 u32 val = settings->odr_table.odr_avl[i].milli_hz; 678 679 len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ", 680 val / 1000, val % 1000); 681 } 682 buf[len - 1] = '\n'; 683 684 return len; 685 } 686 687 static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev, 688 struct device_attribute *attr, 689 char *buf) 690 { 691 struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); 692 const struct st_lsm6dsx_ext_dev_settings *settings; 693 int i, len = 0; 694 695 settings = sensor->ext_info.settings; 696 for (i = 0; i < settings->fs_table.fs_len; i++) 697 len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", 698 settings->fs_table.fs_avl[i].gain); 699 buf[len - 1] = '\n'; 700 701 return len; 702 } 703 704 static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail); 705 static IIO_DEVICE_ATTR(in_scale_available, 0444, 706 st_lsm6dsx_shub_scale_avail, NULL, 0); 707 static struct attribute *st_lsm6dsx_ext_attributes[] = { 708 &iio_dev_attr_sampling_frequency_available.dev_attr.attr, 709 &iio_dev_attr_in_scale_available.dev_attr.attr, 710 NULL, 711 }; 712 713 static const struct attribute_group st_lsm6dsx_ext_attribute_group = { 714 .attrs = st_lsm6dsx_ext_attributes, 715 }; 716 717 static const struct iio_info st_lsm6dsx_ext_info = { 718 .attrs = &st_lsm6dsx_ext_attribute_group, 719 .read_raw = st_lsm6dsx_shub_read_raw, 720 .write_raw = st_lsm6dsx_shub_write_raw, 721 .hwfifo_set_watermark = st_lsm6dsx_set_watermark, 722 }; 723 724 static struct iio_dev * 725 st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw, 726 enum st_lsm6dsx_sensor_id id, 727 const struct st_lsm6dsx_ext_dev_settings *info, 728 u8 i2c_addr, const char *name) 729 { 730 enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC; 731 struct iio_chan_spec *ext_channels; 732 struct st_lsm6dsx_sensor *sensor; 733 struct iio_dev *iio_dev; 734 735 iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor)); 736 if (!iio_dev) 737 return NULL; 738 739 iio_dev->modes = INDIO_DIRECT_MODE; 740 iio_dev->info = &st_lsm6dsx_ext_info; 741 742 sensor = iio_priv(iio_dev); 743 sensor->id = id; 744 sensor->hw = hw; 745 sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz; 746 sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz; 747 sensor->gain = info->fs_table.fs_avl[0].gain; 748 sensor->ext_info.settings = info; 749 sensor->ext_info.addr = i2c_addr; 750 sensor->watermark = 1; 751 752 switch (info->id) { 753 case ST_LSM6DSX_ID_MAGN: { 754 const struct iio_chan_spec magn_channels[] = { 755 ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr, 756 IIO_MOD_X, 0), 757 ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2, 758 IIO_MOD_Y, 1), 759 ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4, 760 IIO_MOD_Z, 2), 761 IIO_CHAN_SOFT_TIMESTAMP(3), 762 }; 763 764 ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels), 765 GFP_KERNEL); 766 if (!ext_channels) 767 return NULL; 768 769 memcpy(ext_channels, magn_channels, sizeof(magn_channels)); 770 iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks; 771 iio_dev->channels = ext_channels; 772 iio_dev->num_channels = ARRAY_SIZE(magn_channels); 773 774 scnprintf(sensor->name, sizeof(sensor->name), "%s_magn", 775 name); 776 break; 777 } 778 default: 779 return NULL; 780 } 781 iio_dev->name = sensor->name; 782 783 return iio_dev; 784 } 785 786 static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor) 787 { 788 const struct st_lsm6dsx_ext_dev_settings *settings; 789 int err; 790 791 settings = sensor->ext_info.settings; 792 if (settings->bdu.addr) { 793 err = st_lsm6dsx_shub_write_with_mask(sensor, 794 settings->bdu.addr, 795 settings->bdu.mask, 1); 796 if (err < 0) 797 return err; 798 } 799 800 if (settings->temp_comp.addr) { 801 err = st_lsm6dsx_shub_write_with_mask(sensor, 802 settings->temp_comp.addr, 803 settings->temp_comp.mask, 1); 804 if (err < 0) 805 return err; 806 } 807 808 if (settings->off_canc.addr) { 809 err = st_lsm6dsx_shub_write_with_mask(sensor, 810 settings->off_canc.addr, 811 settings->off_canc.mask, 1); 812 if (err < 0) 813 return err; 814 } 815 816 return 0; 817 } 818 819 static int 820 st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr, 821 const struct st_lsm6dsx_ext_dev_settings *settings) 822 { 823 const struct st_lsm6dsx_shub_settings *hub_settings; 824 u8 config[3], data, slv_addr, slv_config = 0; 825 const struct st_lsm6dsx_reg *aux_sens; 826 struct st_lsm6dsx_sensor *sensor; 827 bool found = false; 828 int i, err; 829 830 sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); 831 hub_settings = &hw->settings->shub_settings; 832 aux_sens = &hw->settings->shub_settings.aux_sens; 833 slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); 834 /* do not overwrite aux_sens */ 835 if (slv_addr + 2 == aux_sens->addr) 836 slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask); 837 838 for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) { 839 if (!settings->i2c_addr[i]) 840 continue; 841 842 /* read wai slave register */ 843 config[0] = (settings->i2c_addr[i] << 1) | 0x1; 844 config[1] = settings->wai.addr; 845 config[2] = 0x1 | slv_config; 846 847 err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 848 sizeof(config)); 849 if (err < 0) 850 return err; 851 852 err = st_lsm6dsx_shub_master_enable(sensor, true); 853 if (err < 0) 854 return err; 855 856 st_lsm6dsx_shub_wait_complete(hw); 857 858 err = st_lsm6dsx_shub_read_output(hw, &data, sizeof(data)); 859 860 st_lsm6dsx_shub_master_enable(sensor, false); 861 862 if (err < 0) 863 return err; 864 865 if (data != settings->wai.val) 866 continue; 867 868 *i2c_addr = settings->i2c_addr[i]; 869 found = true; 870 break; 871 } 872 873 /* reset SLV0 channel */ 874 config[0] = hub_settings->pause; 875 config[1] = 0; 876 config[2] = slv_config; 877 err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 878 sizeof(config)); 879 if (err < 0) 880 return err; 881 882 return found ? 0 : -ENODEV; 883 } 884 885 int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name) 886 { 887 enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0; 888 struct st_lsm6dsx_sensor *sensor; 889 int err, i, num_ext_dev = 0; 890 u8 i2c_addr = 0; 891 892 for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) { 893 err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr, 894 &st_lsm6dsx_ext_dev_table[i]); 895 if (err == -ENODEV) 896 continue; 897 else if (err < 0) 898 return err; 899 900 hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id, 901 &st_lsm6dsx_ext_dev_table[i], 902 i2c_addr, name); 903 if (!hw->iio_devs[id]) 904 return -ENOMEM; 905 906 sensor = iio_priv(hw->iio_devs[id]); 907 err = st_lsm6dsx_shub_init_device(sensor); 908 if (err < 0) 909 return err; 910 911 if (++num_ext_dev >= hw->settings->shub_settings.num_ext_dev) 912 break; 913 id++; 914 } 915 916 return 0; 917 } 918