xref: /openbmc/linux/drivers/iio/imu/adis16475.c (revision a266ef69)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * ADIS16475 IMU driver
4  *
5  * Copyright 2019 Analog Devices Inc.
6  */
7 #include <linux/bitfield.h>
8 #include <linux/bitops.h>
9 #include <linux/clk.h>
10 #include <linux/debugfs.h>
11 #include <linux/delay.h>
12 #include <linux/device.h>
13 #include <linux/kernel.h>
14 #include <linux/iio/buffer.h>
15 #include <linux/iio/iio.h>
16 #include <linux/iio/imu/adis.h>
17 #include <linux/iio/trigger_consumer.h>
18 #include <linux/irq.h>
19 #include <linux/lcm.h>
20 #include <linux/math.h>
21 #include <linux/module.h>
22 #include <linux/mod_devicetable.h>
23 #include <linux/property.h>
24 #include <linux/spi/spi.h>
25 
26 #define ADIS16475_REG_DIAG_STAT		0x02
27 #define ADIS16475_REG_X_GYRO_L		0x04
28 #define ADIS16475_REG_Y_GYRO_L		0x08
29 #define ADIS16475_REG_Z_GYRO_L		0x0C
30 #define ADIS16475_REG_X_ACCEL_L		0x10
31 #define ADIS16475_REG_Y_ACCEL_L		0x14
32 #define ADIS16475_REG_Z_ACCEL_L		0x18
33 #define ADIS16475_REG_TEMP_OUT		0x1c
34 #define ADIS16475_REG_X_GYRO_BIAS_L	0x40
35 #define ADIS16475_REG_Y_GYRO_BIAS_L	0x44
36 #define ADIS16475_REG_Z_GYRO_BIAS_L	0x48
37 #define ADIS16475_REG_X_ACCEL_BIAS_L	0x4c
38 #define ADIS16475_REG_Y_ACCEL_BIAS_L	0x50
39 #define ADIS16475_REG_Z_ACCEL_BIAS_L	0x54
40 #define ADIS16475_REG_FILT_CTRL		0x5c
41 #define ADIS16475_FILT_CTRL_MASK	GENMASK(2, 0)
42 #define ADIS16475_FILT_CTRL(x)		FIELD_PREP(ADIS16475_FILT_CTRL_MASK, x)
43 #define ADIS16475_REG_MSG_CTRL		0x60
44 #define ADIS16475_MSG_CTRL_DR_POL_MASK	BIT(0)
45 #define ADIS16475_MSG_CTRL_DR_POL(x) \
46 				FIELD_PREP(ADIS16475_MSG_CTRL_DR_POL_MASK, x)
47 #define ADIS16475_SYNC_MODE_MASK	GENMASK(4, 2)
48 #define ADIS16475_SYNC_MODE(x)		FIELD_PREP(ADIS16475_SYNC_MODE_MASK, x)
49 #define ADIS16475_REG_UP_SCALE		0x62
50 #define ADIS16475_REG_DEC_RATE		0x64
51 #define ADIS16475_REG_GLOB_CMD		0x68
52 #define ADIS16475_REG_FIRM_REV		0x6c
53 #define ADIS16475_REG_FIRM_DM		0x6e
54 #define ADIS16475_REG_FIRM_Y		0x70
55 #define ADIS16475_REG_PROD_ID		0x72
56 #define ADIS16475_REG_SERIAL_NUM	0x74
57 #define ADIS16475_REG_FLASH_CNT		0x7c
58 #define ADIS16500_BURST32_MASK		BIT(9)
59 #define ADIS16500_BURST32(x)		FIELD_PREP(ADIS16500_BURST32_MASK, x)
60 /* number of data elements in burst mode */
61 #define ADIS16475_BURST32_MAX_DATA	32
62 #define ADIS16475_BURST_MAX_DATA	20
63 #define ADIS16475_MAX_SCAN_DATA		20
64 /* spi max speed in brust mode */
65 #define ADIS16475_BURST_MAX_SPEED	1000000
66 #define ADIS16475_LSB_DEC_MASK		BIT(0)
67 #define ADIS16475_LSB_FIR_MASK		BIT(1)
68 
69 enum {
70 	ADIS16475_SYNC_DIRECT = 1,
71 	ADIS16475_SYNC_SCALED,
72 	ADIS16475_SYNC_OUTPUT,
73 	ADIS16475_SYNC_PULSE = 5,
74 };
75 
76 struct adis16475_sync {
77 	u16 sync_mode;
78 	u16 min_rate;
79 	u16 max_rate;
80 };
81 
82 struct adis16475_chip_info {
83 	const struct iio_chan_spec *channels;
84 	const struct adis16475_sync *sync;
85 	const struct adis_data adis_data;
86 	const char *name;
87 	u32 num_channels;
88 	u32 gyro_max_val;
89 	u32 gyro_max_scale;
90 	u32 accel_max_val;
91 	u32 accel_max_scale;
92 	u32 temp_scale;
93 	u32 int_clk;
94 	u16 max_dec;
95 	u8 num_sync;
96 	bool has_burst32;
97 };
98 
99 struct adis16475 {
100 	const struct adis16475_chip_info *info;
101 	struct adis adis;
102 	u32 clk_freq;
103 	bool burst32;
104 	unsigned long lsb_flag;
105 	u16 sync_mode;
106 	/* Alignment needed for the timestamp */
107 	__be16 data[ADIS16475_MAX_SCAN_DATA] __aligned(8);
108 };
109 
110 enum {
111 	ADIS16475_SCAN_GYRO_X,
112 	ADIS16475_SCAN_GYRO_Y,
113 	ADIS16475_SCAN_GYRO_Z,
114 	ADIS16475_SCAN_ACCEL_X,
115 	ADIS16475_SCAN_ACCEL_Y,
116 	ADIS16475_SCAN_ACCEL_Z,
117 	ADIS16475_SCAN_TEMP,
118 	ADIS16475_SCAN_DIAG_S_FLAGS,
119 	ADIS16475_SCAN_CRC_FAILURE,
120 };
121 
122 static bool low_rate_allow;
123 module_param(low_rate_allow, bool, 0444);
124 MODULE_PARM_DESC(low_rate_allow,
125 		 "Allow IMU rates below the minimum advisable when external clk is used in SCALED mode (default: N)");
126 
127 #ifdef CONFIG_DEBUG_FS
128 static ssize_t adis16475_show_firmware_revision(struct file *file,
129 						char __user *userbuf,
130 						size_t count, loff_t *ppos)
131 {
132 	struct adis16475 *st = file->private_data;
133 	char buf[7];
134 	size_t len;
135 	u16 rev;
136 	int ret;
137 
138 	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_REV, &rev);
139 	if (ret)
140 		return ret;
141 
142 	len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff);
143 
144 	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
145 }
146 
147 static const struct file_operations adis16475_firmware_revision_fops = {
148 	.open = simple_open,
149 	.read = adis16475_show_firmware_revision,
150 	.llseek = default_llseek,
151 	.owner = THIS_MODULE,
152 };
153 
154 static ssize_t adis16475_show_firmware_date(struct file *file,
155 					    char __user *userbuf,
156 					    size_t count, loff_t *ppos)
157 {
158 	struct adis16475 *st = file->private_data;
159 	u16 md, year;
160 	char buf[12];
161 	size_t len;
162 	int ret;
163 
164 	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_Y, &year);
165 	if (ret)
166 		return ret;
167 
168 	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_DM, &md);
169 	if (ret)
170 		return ret;
171 
172 	len = snprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n", md >> 8, md & 0xff,
173 		       year);
174 
175 	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
176 }
177 
178 static const struct file_operations adis16475_firmware_date_fops = {
179 	.open = simple_open,
180 	.read = adis16475_show_firmware_date,
181 	.llseek = default_llseek,
182 	.owner = THIS_MODULE,
183 };
184 
185 static int adis16475_show_serial_number(void *arg, u64 *val)
186 {
187 	struct adis16475 *st = arg;
188 	u16 serial;
189 	int ret;
190 
191 	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_SERIAL_NUM, &serial);
192 	if (ret)
193 		return ret;
194 
195 	*val = serial;
196 
197 	return 0;
198 }
199 DEFINE_DEBUGFS_ATTRIBUTE(adis16475_serial_number_fops,
200 			 adis16475_show_serial_number, NULL, "0x%.4llx\n");
201 
202 static int adis16475_show_product_id(void *arg, u64 *val)
203 {
204 	struct adis16475 *st = arg;
205 	u16 prod_id;
206 	int ret;
207 
208 	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_PROD_ID, &prod_id);
209 	if (ret)
210 		return ret;
211 
212 	*val = prod_id;
213 
214 	return 0;
215 }
216 DEFINE_DEBUGFS_ATTRIBUTE(adis16475_product_id_fops,
217 			 adis16475_show_product_id, NULL, "%llu\n");
218 
219 static int adis16475_show_flash_count(void *arg, u64 *val)
220 {
221 	struct adis16475 *st = arg;
222 	u32 flash_count;
223 	int ret;
224 
225 	ret = adis_read_reg_32(&st->adis, ADIS16475_REG_FLASH_CNT,
226 			       &flash_count);
227 	if (ret)
228 		return ret;
229 
230 	*val = flash_count;
231 
232 	return 0;
233 }
234 DEFINE_DEBUGFS_ATTRIBUTE(adis16475_flash_count_fops,
235 			 adis16475_show_flash_count, NULL, "%lld\n");
236 
237 static void adis16475_debugfs_init(struct iio_dev *indio_dev)
238 {
239 	struct adis16475 *st = iio_priv(indio_dev);
240 	struct dentry *d = iio_get_debugfs_dentry(indio_dev);
241 
242 	debugfs_create_file_unsafe("serial_number", 0400,
243 				   d, st, &adis16475_serial_number_fops);
244 	debugfs_create_file_unsafe("product_id", 0400,
245 				   d, st, &adis16475_product_id_fops);
246 	debugfs_create_file_unsafe("flash_count", 0400,
247 				   d, st, &adis16475_flash_count_fops);
248 	debugfs_create_file("firmware_revision", 0400,
249 			    d, st, &adis16475_firmware_revision_fops);
250 	debugfs_create_file("firmware_date", 0400, d,
251 			    st, &adis16475_firmware_date_fops);
252 }
253 #else
254 static void adis16475_debugfs_init(struct iio_dev *indio_dev)
255 {
256 }
257 #endif
258 
259 static int adis16475_get_freq(struct adis16475 *st, u32 *freq)
260 {
261 	int ret;
262 	u16 dec;
263 	u32 sample_rate = st->clk_freq;
264 
265 	adis_dev_lock(&st->adis);
266 
267 	if (st->sync_mode == ADIS16475_SYNC_SCALED) {
268 		u16 sync_scale;
269 
270 		ret = __adis_read_reg_16(&st->adis, ADIS16475_REG_UP_SCALE, &sync_scale);
271 		if (ret)
272 			goto error;
273 
274 		sample_rate = st->clk_freq * sync_scale;
275 	}
276 
277 	ret = __adis_read_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, &dec);
278 	if (ret)
279 		goto error;
280 
281 	adis_dev_unlock(&st->adis);
282 
283 	*freq = DIV_ROUND_CLOSEST(sample_rate, dec + 1);
284 
285 	return 0;
286 error:
287 	adis_dev_unlock(&st->adis);
288 	return ret;
289 }
290 
291 static int adis16475_set_freq(struct adis16475 *st, const u32 freq)
292 {
293 	u16 dec;
294 	int ret;
295 	u32 sample_rate = st->clk_freq;
296 
297 	if (!freq)
298 		return -EINVAL;
299 
300 	adis_dev_lock(&st->adis);
301 	/*
302 	 * When using sync scaled mode, the input clock needs to be scaled so that we have
303 	 * an IMU sample rate between (optimally) 1900 and 2100. After this, we can use the
304 	 * decimation filter to lower the sampling rate in order to get what the user wants.
305 	 * Optimally, the user sample rate is a multiple of both the IMU sample rate and
306 	 * the input clock. Hence, calculating the sync_scale dynamically gives us better
307 	 * chances of achieving a perfect/integer value for DEC_RATE. The math here is:
308 	 *	1. lcm of the input clock and the desired output rate.
309 	 *	2. get the highest multiple of the previous result lower than the adis max rate.
310 	 *	3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE
311 	 *	   and DEC_RATE (to get the user output rate)
312 	 */
313 	if (st->sync_mode == ADIS16475_SYNC_SCALED) {
314 		unsigned long scaled_rate = lcm(st->clk_freq, freq);
315 		int sync_scale;
316 
317 		/*
318 		 * If lcm is bigger than the IMU maximum sampling rate there's no perfect
319 		 * solution. In this case, we get the highest multiple of the input clock
320 		 * lower than the IMU max sample rate.
321 		 */
322 		if (scaled_rate > 2100000)
323 			scaled_rate = 2100000 / st->clk_freq * st->clk_freq;
324 		else
325 			scaled_rate = 2100000 / scaled_rate * scaled_rate;
326 
327 		/*
328 		 * This is not an hard requirement but it's not advised to run the IMU
329 		 * with a sample rate lower than 4000Hz due to possible undersampling
330 		 * issues. However, there are users that might really want to take the risk.
331 		 * Hence, we provide a module parameter for them. If set, we allow sample
332 		 * rates lower than 4KHz. By default, we won't allow this and we just roundup
333 		 * the rate to the next multiple of the input clock bigger than 4KHz. This
334 		 * is done like this as in some cases (when DEC_RATE is 0) might give
335 		 * us the closest value to the one desired by the user...
336 		 */
337 		if (scaled_rate < 1900000 && !low_rate_allow)
338 			scaled_rate = roundup(1900000, st->clk_freq);
339 
340 		sync_scale = scaled_rate / st->clk_freq;
341 		ret = __adis_write_reg_16(&st->adis, ADIS16475_REG_UP_SCALE, sync_scale);
342 		if (ret)
343 			goto error;
344 
345 		sample_rate = scaled_rate;
346 	}
347 
348 	dec = DIV_ROUND_CLOSEST(sample_rate, freq);
349 
350 	if (dec)
351 		dec--;
352 
353 	if (dec > st->info->max_dec)
354 		dec = st->info->max_dec;
355 
356 	ret = __adis_write_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, dec);
357 	if (ret)
358 		goto error;
359 
360 	adis_dev_unlock(&st->adis);
361 	/*
362 	 * If decimation is used, then gyro and accel data will have meaningful
363 	 * bits on the LSB registers. This info is used on the trigger handler.
364 	 */
365 	assign_bit(ADIS16475_LSB_DEC_MASK, &st->lsb_flag, dec);
366 
367 	return 0;
368 error:
369 	adis_dev_unlock(&st->adis);
370 	return ret;
371 }
372 
373 /* The values are approximated. */
374 static const u32 adis16475_3db_freqs[] = {
375 	[0] = 720, /* Filter disabled, full BW (~720Hz) */
376 	[1] = 360,
377 	[2] = 164,
378 	[3] = 80,
379 	[4] = 40,
380 	[5] = 20,
381 	[6] = 10,
382 };
383 
384 static int adis16475_get_filter(struct adis16475 *st, u32 *filter)
385 {
386 	u16 filter_sz;
387 	int ret;
388 	const int mask = ADIS16475_FILT_CTRL_MASK;
389 
390 	ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FILT_CTRL, &filter_sz);
391 	if (ret)
392 		return ret;
393 
394 	*filter = adis16475_3db_freqs[filter_sz & mask];
395 
396 	return 0;
397 }
398 
399 static int adis16475_set_filter(struct adis16475 *st, const u32 filter)
400 {
401 	int i = ARRAY_SIZE(adis16475_3db_freqs);
402 	int ret;
403 
404 	while (--i) {
405 		if (adis16475_3db_freqs[i] >= filter)
406 			break;
407 	}
408 
409 	ret = adis_write_reg_16(&st->adis, ADIS16475_REG_FILT_CTRL,
410 				ADIS16475_FILT_CTRL(i));
411 	if (ret)
412 		return ret;
413 
414 	/*
415 	 * If FIR is used, then gyro and accel data will have meaningful
416 	 * bits on the LSB registers. This info is used on the trigger handler.
417 	 */
418 	assign_bit(ADIS16475_LSB_FIR_MASK, &st->lsb_flag, i);
419 
420 	return 0;
421 }
422 
423 static const u32 adis16475_calib_regs[] = {
424 	[ADIS16475_SCAN_GYRO_X] = ADIS16475_REG_X_GYRO_BIAS_L,
425 	[ADIS16475_SCAN_GYRO_Y] = ADIS16475_REG_Y_GYRO_BIAS_L,
426 	[ADIS16475_SCAN_GYRO_Z] = ADIS16475_REG_Z_GYRO_BIAS_L,
427 	[ADIS16475_SCAN_ACCEL_X] = ADIS16475_REG_X_ACCEL_BIAS_L,
428 	[ADIS16475_SCAN_ACCEL_Y] = ADIS16475_REG_Y_ACCEL_BIAS_L,
429 	[ADIS16475_SCAN_ACCEL_Z] = ADIS16475_REG_Z_ACCEL_BIAS_L,
430 };
431 
432 static int adis16475_read_raw(struct iio_dev *indio_dev,
433 			      const struct iio_chan_spec *chan,
434 			      int *val, int *val2, long info)
435 {
436 	struct adis16475 *st = iio_priv(indio_dev);
437 	int ret;
438 	u32 tmp;
439 
440 	switch (info) {
441 	case IIO_CHAN_INFO_RAW:
442 		return adis_single_conversion(indio_dev, chan, 0, val);
443 	case IIO_CHAN_INFO_SCALE:
444 		switch (chan->type) {
445 		case IIO_ANGL_VEL:
446 			*val = st->info->gyro_max_val;
447 			*val2 = st->info->gyro_max_scale;
448 			return IIO_VAL_FRACTIONAL;
449 		case IIO_ACCEL:
450 			*val = st->info->accel_max_val;
451 			*val2 = st->info->accel_max_scale;
452 			return IIO_VAL_FRACTIONAL;
453 		case IIO_TEMP:
454 			*val = st->info->temp_scale;
455 			return IIO_VAL_INT;
456 		default:
457 			return -EINVAL;
458 		}
459 	case IIO_CHAN_INFO_CALIBBIAS:
460 		ret = adis_read_reg_32(&st->adis,
461 				       adis16475_calib_regs[chan->scan_index],
462 				       val);
463 		if (ret)
464 			return ret;
465 
466 		return IIO_VAL_INT;
467 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
468 		ret = adis16475_get_filter(st, val);
469 		if (ret)
470 			return ret;
471 
472 		return IIO_VAL_INT;
473 	case IIO_CHAN_INFO_SAMP_FREQ:
474 		ret = adis16475_get_freq(st, &tmp);
475 		if (ret)
476 			return ret;
477 
478 		*val = tmp / 1000;
479 		*val2 = (tmp % 1000) * 1000;
480 		return IIO_VAL_INT_PLUS_MICRO;
481 	default:
482 		return -EINVAL;
483 	}
484 }
485 
486 static int adis16475_write_raw(struct iio_dev *indio_dev,
487 			       const struct iio_chan_spec *chan,
488 			       int val, int val2, long info)
489 {
490 	struct adis16475 *st = iio_priv(indio_dev);
491 	u32 tmp;
492 
493 	switch (info) {
494 	case IIO_CHAN_INFO_SAMP_FREQ:
495 		tmp = val * 1000 + val2 / 1000;
496 		return adis16475_set_freq(st, tmp);
497 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
498 		return adis16475_set_filter(st, val);
499 	case IIO_CHAN_INFO_CALIBBIAS:
500 		return adis_write_reg_32(&st->adis,
501 					 adis16475_calib_regs[chan->scan_index],
502 					 val);
503 	default:
504 		return -EINVAL;
505 	}
506 }
507 
508 #define ADIS16475_MOD_CHAN(_type, _mod, _address, _si, _r_bits, _s_bits) \
509 	{ \
510 		.type = (_type), \
511 		.modified = 1, \
512 		.channel2 = (_mod), \
513 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
514 			BIT(IIO_CHAN_INFO_CALIBBIAS), \
515 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
516 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
517 			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
518 		.address = (_address), \
519 		.scan_index = (_si), \
520 		.scan_type = { \
521 			.sign = 's', \
522 			.realbits = (_r_bits), \
523 			.storagebits = (_s_bits), \
524 			.endianness = IIO_BE, \
525 		}, \
526 	}
527 
528 #define ADIS16475_GYRO_CHANNEL(_mod) \
529 	ADIS16475_MOD_CHAN(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \
530 			   ADIS16475_REG_ ## _mod ## _GYRO_L, \
531 			   ADIS16475_SCAN_GYRO_ ## _mod, 32, 32)
532 
533 #define ADIS16475_ACCEL_CHANNEL(_mod) \
534 	ADIS16475_MOD_CHAN(IIO_ACCEL, IIO_MOD_ ## _mod, \
535 			   ADIS16475_REG_ ## _mod ## _ACCEL_L, \
536 			   ADIS16475_SCAN_ACCEL_ ## _mod, 32, 32)
537 
538 #define ADIS16475_TEMP_CHANNEL() { \
539 		.type = IIO_TEMP, \
540 		.indexed = 1, \
541 		.channel = 0, \
542 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
543 			BIT(IIO_CHAN_INFO_SCALE), \
544 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
545 			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
546 		.address = ADIS16475_REG_TEMP_OUT, \
547 		.scan_index = ADIS16475_SCAN_TEMP, \
548 		.scan_type = { \
549 			.sign = 's', \
550 			.realbits = 16, \
551 			.storagebits = 16, \
552 			.endianness = IIO_BE, \
553 		}, \
554 	}
555 
556 static const struct iio_chan_spec adis16475_channels[] = {
557 	ADIS16475_GYRO_CHANNEL(X),
558 	ADIS16475_GYRO_CHANNEL(Y),
559 	ADIS16475_GYRO_CHANNEL(Z),
560 	ADIS16475_ACCEL_CHANNEL(X),
561 	ADIS16475_ACCEL_CHANNEL(Y),
562 	ADIS16475_ACCEL_CHANNEL(Z),
563 	ADIS16475_TEMP_CHANNEL(),
564 	IIO_CHAN_SOFT_TIMESTAMP(7)
565 };
566 
567 enum adis16475_variant {
568 	ADIS16470,
569 	ADIS16475_1,
570 	ADIS16475_2,
571 	ADIS16475_3,
572 	ADIS16477_1,
573 	ADIS16477_2,
574 	ADIS16477_3,
575 	ADIS16465_1,
576 	ADIS16465_2,
577 	ADIS16465_3,
578 	ADIS16467_1,
579 	ADIS16467_2,
580 	ADIS16467_3,
581 	ADIS16500,
582 	ADIS16505_1,
583 	ADIS16505_2,
584 	ADIS16505_3,
585 	ADIS16507_1,
586 	ADIS16507_2,
587 	ADIS16507_3,
588 };
589 
590 enum {
591 	ADIS16475_DIAG_STAT_DATA_PATH = 1,
592 	ADIS16475_DIAG_STAT_FLASH_MEM,
593 	ADIS16475_DIAG_STAT_SPI,
594 	ADIS16475_DIAG_STAT_STANDBY,
595 	ADIS16475_DIAG_STAT_SENSOR,
596 	ADIS16475_DIAG_STAT_MEMORY,
597 	ADIS16475_DIAG_STAT_CLK,
598 };
599 
600 static const char * const adis16475_status_error_msgs[] = {
601 	[ADIS16475_DIAG_STAT_DATA_PATH] = "Data Path Overrun",
602 	[ADIS16475_DIAG_STAT_FLASH_MEM] = "Flash memory update failure",
603 	[ADIS16475_DIAG_STAT_SPI] = "SPI communication error",
604 	[ADIS16475_DIAG_STAT_STANDBY] = "Standby mode",
605 	[ADIS16475_DIAG_STAT_SENSOR] = "Sensor failure",
606 	[ADIS16475_DIAG_STAT_MEMORY] = "Memory failure",
607 	[ADIS16475_DIAG_STAT_CLK] = "Clock error",
608 };
609 
610 #define ADIS16475_DATA(_prod_id, _timeouts)				\
611 {									\
612 	.msc_ctrl_reg = ADIS16475_REG_MSG_CTRL,				\
613 	.glob_cmd_reg = ADIS16475_REG_GLOB_CMD,				\
614 	.diag_stat_reg = ADIS16475_REG_DIAG_STAT,			\
615 	.prod_id_reg = ADIS16475_REG_PROD_ID,				\
616 	.prod_id = (_prod_id),						\
617 	.self_test_mask = BIT(2),					\
618 	.self_test_reg = ADIS16475_REG_GLOB_CMD,			\
619 	.cs_change_delay = 16,						\
620 	.read_delay = 5,						\
621 	.write_delay = 5,						\
622 	.status_error_msgs = adis16475_status_error_msgs,		\
623 	.status_error_mask = BIT(ADIS16475_DIAG_STAT_DATA_PATH) |	\
624 		BIT(ADIS16475_DIAG_STAT_FLASH_MEM) |			\
625 		BIT(ADIS16475_DIAG_STAT_SPI) |				\
626 		BIT(ADIS16475_DIAG_STAT_STANDBY) |			\
627 		BIT(ADIS16475_DIAG_STAT_SENSOR) |			\
628 		BIT(ADIS16475_DIAG_STAT_MEMORY) |			\
629 		BIT(ADIS16475_DIAG_STAT_CLK),				\
630 	.unmasked_drdy = true,						\
631 	.timeouts = (_timeouts),					\
632 	.burst_reg_cmd = ADIS16475_REG_GLOB_CMD,			\
633 	.burst_len = ADIS16475_BURST_MAX_DATA,				\
634 	.burst_max_len = ADIS16475_BURST32_MAX_DATA,			\
635 	.burst_max_speed_hz = ADIS16475_BURST_MAX_SPEED			\
636 }
637 
638 static const struct adis16475_sync adis16475_sync_mode[] = {
639 	{ ADIS16475_SYNC_OUTPUT },
640 	{ ADIS16475_SYNC_DIRECT, 1900, 2100 },
641 	{ ADIS16475_SYNC_SCALED, 1, 128 },
642 	{ ADIS16475_SYNC_PULSE, 1000, 2100 },
643 };
644 
645 static const struct adis_timeout adis16475_timeouts = {
646 	.reset_ms = 200,
647 	.sw_reset_ms = 200,
648 	.self_test_ms = 20,
649 };
650 
651 static const struct adis_timeout adis1650x_timeouts = {
652 	.reset_ms = 260,
653 	.sw_reset_ms = 260,
654 	.self_test_ms = 30,
655 };
656 
657 static const struct adis16475_chip_info adis16475_chip_info[] = {
658 	[ADIS16470] = {
659 		.name = "adis16470",
660 		.num_channels = ARRAY_SIZE(adis16475_channels),
661 		.channels = adis16475_channels,
662 		.gyro_max_val = 1,
663 		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
664 		.accel_max_val = 1,
665 		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
666 		.temp_scale = 100,
667 		.int_clk = 2000,
668 		.max_dec = 1999,
669 		.sync = adis16475_sync_mode,
670 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
671 		.adis_data = ADIS16475_DATA(16470, &adis16475_timeouts),
672 	},
673 	[ADIS16475_1] = {
674 		.name = "adis16475-1",
675 		.num_channels = ARRAY_SIZE(adis16475_channels),
676 		.channels = adis16475_channels,
677 		.gyro_max_val = 1,
678 		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
679 		.accel_max_val = 1,
680 		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
681 		.temp_scale = 100,
682 		.int_clk = 2000,
683 		.max_dec = 1999,
684 		.sync = adis16475_sync_mode,
685 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
686 		.adis_data = ADIS16475_DATA(16475, &adis16475_timeouts),
687 	},
688 	[ADIS16475_2] = {
689 		.name = "adis16475-2",
690 		.num_channels = ARRAY_SIZE(adis16475_channels),
691 		.channels = adis16475_channels,
692 		.gyro_max_val = 1,
693 		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
694 		.accel_max_val = 1,
695 		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
696 		.temp_scale = 100,
697 		.int_clk = 2000,
698 		.max_dec = 1999,
699 		.sync = adis16475_sync_mode,
700 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
701 		.adis_data = ADIS16475_DATA(16475, &adis16475_timeouts),
702 	},
703 	[ADIS16475_3] = {
704 		.name = "adis16475-3",
705 		.num_channels = ARRAY_SIZE(adis16475_channels),
706 		.channels = adis16475_channels,
707 		.gyro_max_val = 1,
708 		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
709 		.accel_max_val = 1,
710 		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
711 		.temp_scale = 100,
712 		.int_clk = 2000,
713 		.max_dec = 1999,
714 		.sync = adis16475_sync_mode,
715 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
716 		.adis_data = ADIS16475_DATA(16475, &adis16475_timeouts),
717 	},
718 	[ADIS16477_1] = {
719 		.name = "adis16477-1",
720 		.num_channels = ARRAY_SIZE(adis16475_channels),
721 		.channels = adis16475_channels,
722 		.gyro_max_val = 1,
723 		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
724 		.accel_max_val = 1,
725 		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
726 		.temp_scale = 100,
727 		.int_clk = 2000,
728 		.max_dec = 1999,
729 		.sync = adis16475_sync_mode,
730 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
731 		.adis_data = ADIS16475_DATA(16477, &adis16475_timeouts),
732 	},
733 	[ADIS16477_2] = {
734 		.name = "adis16477-2",
735 		.num_channels = ARRAY_SIZE(adis16475_channels),
736 		.channels = adis16475_channels,
737 		.gyro_max_val = 1,
738 		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
739 		.accel_max_val = 1,
740 		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
741 		.temp_scale = 100,
742 		.int_clk = 2000,
743 		.max_dec = 1999,
744 		.sync = adis16475_sync_mode,
745 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
746 		.adis_data = ADIS16475_DATA(16477, &adis16475_timeouts),
747 	},
748 	[ADIS16477_3] = {
749 		.name = "adis16477-3",
750 		.num_channels = ARRAY_SIZE(adis16475_channels),
751 		.channels = adis16475_channels,
752 		.gyro_max_val = 1,
753 		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
754 		.accel_max_val = 1,
755 		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
756 		.temp_scale = 100,
757 		.int_clk = 2000,
758 		.max_dec = 1999,
759 		.sync = adis16475_sync_mode,
760 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
761 		.adis_data = ADIS16475_DATA(16477, &adis16475_timeouts),
762 	},
763 	[ADIS16465_1] = {
764 		.name = "adis16465-1",
765 		.num_channels = ARRAY_SIZE(adis16475_channels),
766 		.channels = adis16475_channels,
767 		.gyro_max_val = 1,
768 		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
769 		.accel_max_val = 1,
770 		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
771 		.temp_scale = 100,
772 		.int_clk = 2000,
773 		.max_dec = 1999,
774 		.sync = adis16475_sync_mode,
775 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
776 		.adis_data = ADIS16475_DATA(16465, &adis16475_timeouts),
777 	},
778 	[ADIS16465_2] = {
779 		.name = "adis16465-2",
780 		.num_channels = ARRAY_SIZE(adis16475_channels),
781 		.channels = adis16475_channels,
782 		.gyro_max_val = 1,
783 		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
784 		.accel_max_val = 1,
785 		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
786 		.temp_scale = 100,
787 		.int_clk = 2000,
788 		.max_dec = 1999,
789 		.sync = adis16475_sync_mode,
790 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
791 		.adis_data = ADIS16475_DATA(16465, &adis16475_timeouts),
792 	},
793 	[ADIS16465_3] = {
794 		.name = "adis16465-3",
795 		.num_channels = ARRAY_SIZE(adis16475_channels),
796 		.channels = adis16475_channels,
797 		.gyro_max_val = 1,
798 		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
799 		.accel_max_val = 1,
800 		.accel_max_scale = IIO_M_S_2_TO_G(4000 << 16),
801 		.temp_scale = 100,
802 		.int_clk = 2000,
803 		.max_dec = 1999,
804 		.sync = adis16475_sync_mode,
805 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
806 		.adis_data = ADIS16475_DATA(16465, &adis16475_timeouts),
807 	},
808 	[ADIS16467_1] = {
809 		.name = "adis16467-1",
810 		.num_channels = ARRAY_SIZE(adis16475_channels),
811 		.channels = adis16475_channels,
812 		.gyro_max_val = 1,
813 		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
814 		.accel_max_val = 1,
815 		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
816 		.temp_scale = 100,
817 		.int_clk = 2000,
818 		.max_dec = 1999,
819 		.sync = adis16475_sync_mode,
820 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
821 		.adis_data = ADIS16475_DATA(16467, &adis16475_timeouts),
822 	},
823 	[ADIS16467_2] = {
824 		.name = "adis16467-2",
825 		.num_channels = ARRAY_SIZE(adis16475_channels),
826 		.channels = adis16475_channels,
827 		.gyro_max_val = 1,
828 		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
829 		.accel_max_val = 1,
830 		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
831 		.temp_scale = 100,
832 		.int_clk = 2000,
833 		.max_dec = 1999,
834 		.sync = adis16475_sync_mode,
835 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
836 		.adis_data = ADIS16475_DATA(16467, &adis16475_timeouts),
837 	},
838 	[ADIS16467_3] = {
839 		.name = "adis16467-3",
840 		.num_channels = ARRAY_SIZE(adis16475_channels),
841 		.channels = adis16475_channels,
842 		.gyro_max_val = 1,
843 		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
844 		.accel_max_val = 1,
845 		.accel_max_scale = IIO_M_S_2_TO_G(800 << 16),
846 		.temp_scale = 100,
847 		.int_clk = 2000,
848 		.max_dec = 1999,
849 		.sync = adis16475_sync_mode,
850 		.num_sync = ARRAY_SIZE(adis16475_sync_mode),
851 		.adis_data = ADIS16475_DATA(16467, &adis16475_timeouts),
852 	},
853 	[ADIS16500] = {
854 		.name = "adis16500",
855 		.num_channels = ARRAY_SIZE(adis16475_channels),
856 		.channels = adis16475_channels,
857 		.gyro_max_val = 1,
858 		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
859 		.accel_max_val = 392,
860 		.accel_max_scale = 32000 << 16,
861 		.temp_scale = 100,
862 		.int_clk = 2000,
863 		.max_dec = 1999,
864 		.sync = adis16475_sync_mode,
865 		/* pulse sync not supported */
866 		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
867 		.has_burst32 = true,
868 		.adis_data = ADIS16475_DATA(16500, &adis1650x_timeouts),
869 	},
870 	[ADIS16505_1] = {
871 		.name = "adis16505-1",
872 		.num_channels = ARRAY_SIZE(adis16475_channels),
873 		.channels = adis16475_channels,
874 		.gyro_max_val = 1,
875 		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
876 		.accel_max_val = 78,
877 		.accel_max_scale = 32000 << 16,
878 		.temp_scale = 100,
879 		.int_clk = 2000,
880 		.max_dec = 1999,
881 		.sync = adis16475_sync_mode,
882 		/* pulse sync not supported */
883 		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
884 		.has_burst32 = true,
885 		.adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts),
886 	},
887 	[ADIS16505_2] = {
888 		.name = "adis16505-2",
889 		.num_channels = ARRAY_SIZE(adis16475_channels),
890 		.channels = adis16475_channels,
891 		.gyro_max_val = 1,
892 		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
893 		.accel_max_val = 78,
894 		.accel_max_scale = 32000 << 16,
895 		.temp_scale = 100,
896 		.int_clk = 2000,
897 		.max_dec = 1999,
898 		.sync = adis16475_sync_mode,
899 		/* pulse sync not supported */
900 		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
901 		.has_burst32 = true,
902 		.adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts),
903 	},
904 	[ADIS16505_3] = {
905 		.name = "adis16505-3",
906 		.num_channels = ARRAY_SIZE(adis16475_channels),
907 		.channels = adis16475_channels,
908 		.gyro_max_val = 1,
909 		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
910 		.accel_max_val = 78,
911 		.accel_max_scale = 32000 << 16,
912 		.temp_scale = 100,
913 		.int_clk = 2000,
914 		.max_dec = 1999,
915 		.sync = adis16475_sync_mode,
916 		/* pulse sync not supported */
917 		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
918 		.has_burst32 = true,
919 		.adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts),
920 	},
921 	[ADIS16507_1] = {
922 		.name = "adis16507-1",
923 		.num_channels = ARRAY_SIZE(adis16475_channels),
924 		.channels = adis16475_channels,
925 		.gyro_max_val = 1,
926 		.gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16),
927 		.accel_max_val = 392,
928 		.accel_max_scale = 32000 << 16,
929 		.temp_scale = 100,
930 		.int_clk = 2000,
931 		.max_dec = 1999,
932 		.sync = adis16475_sync_mode,
933 		/* pulse sync not supported */
934 		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
935 		.has_burst32 = true,
936 		.adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts),
937 	},
938 	[ADIS16507_2] = {
939 		.name = "adis16507-2",
940 		.num_channels = ARRAY_SIZE(adis16475_channels),
941 		.channels = adis16475_channels,
942 		.gyro_max_val = 1,
943 		.gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16),
944 		.accel_max_val = 392,
945 		.accel_max_scale = 32000 << 16,
946 		.temp_scale = 100,
947 		.int_clk = 2000,
948 		.max_dec = 1999,
949 		.sync = adis16475_sync_mode,
950 		/* pulse sync not supported */
951 		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
952 		.has_burst32 = true,
953 		.adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts),
954 	},
955 	[ADIS16507_3] = {
956 		.name = "adis16507-3",
957 		.num_channels = ARRAY_SIZE(adis16475_channels),
958 		.channels = adis16475_channels,
959 		.gyro_max_val = 1,
960 		.gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16),
961 		.accel_max_val = 392,
962 		.accel_max_scale = 32000 << 16,
963 		.temp_scale = 100,
964 		.int_clk = 2000,
965 		.max_dec = 1999,
966 		.sync = adis16475_sync_mode,
967 		/* pulse sync not supported */
968 		.num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1,
969 		.has_burst32 = true,
970 		.adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts),
971 	},
972 };
973 
974 static const struct iio_info adis16475_info = {
975 	.read_raw = &adis16475_read_raw,
976 	.write_raw = &adis16475_write_raw,
977 	.update_scan_mode = adis_update_scan_mode,
978 	.debugfs_reg_access = adis_debugfs_reg_access,
979 };
980 
981 static bool adis16475_validate_crc(const u8 *buffer, u16 crc,
982 				   const bool burst32)
983 {
984 	int i;
985 	/* extra 6 elements for low gyro and accel */
986 	const u16 sz = burst32 ? ADIS16475_BURST32_MAX_DATA :
987 		ADIS16475_BURST_MAX_DATA;
988 
989 	for (i = 0; i < sz - 2; i++)
990 		crc -= buffer[i];
991 
992 	return crc == 0;
993 }
994 
995 static void adis16475_burst32_check(struct adis16475 *st)
996 {
997 	int ret;
998 	struct adis *adis = &st->adis;
999 
1000 	if (!st->info->has_burst32)
1001 		return;
1002 
1003 	if (st->lsb_flag && !st->burst32) {
1004 		const u16 en = ADIS16500_BURST32(1);
1005 
1006 		ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
1007 					 ADIS16500_BURST32_MASK, en);
1008 		if (ret)
1009 			return;
1010 
1011 		st->burst32 = true;
1012 
1013 		/*
1014 		 * In 32-bit mode we need extra 2 bytes for all gyro
1015 		 * and accel channels.
1016 		 */
1017 		adis->burst_extra_len = 6 * sizeof(u16);
1018 		adis->xfer[1].len += 6 * sizeof(u16);
1019 		dev_dbg(&adis->spi->dev, "Enable burst32 mode, xfer:%d",
1020 			adis->xfer[1].len);
1021 
1022 	} else if (!st->lsb_flag && st->burst32) {
1023 		const u16 en = ADIS16500_BURST32(0);
1024 
1025 		ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
1026 					 ADIS16500_BURST32_MASK, en);
1027 		if (ret)
1028 			return;
1029 
1030 		st->burst32 = false;
1031 
1032 		/* Remove the extra bits */
1033 		adis->burst_extra_len = 0;
1034 		adis->xfer[1].len -= 6 * sizeof(u16);
1035 		dev_dbg(&adis->spi->dev, "Disable burst32 mode, xfer:%d\n",
1036 			adis->xfer[1].len);
1037 	}
1038 }
1039 
1040 static irqreturn_t adis16475_trigger_handler(int irq, void *p)
1041 {
1042 	struct iio_poll_func *pf = p;
1043 	struct iio_dev *indio_dev = pf->indio_dev;
1044 	struct adis16475 *st = iio_priv(indio_dev);
1045 	struct adis *adis = &st->adis;
1046 	int ret, bit, i = 0;
1047 	__be16 *buffer;
1048 	u16 crc;
1049 	bool valid;
1050 	/* offset until the first element after gyro and accel */
1051 	const u8 offset = st->burst32 ? 13 : 7;
1052 
1053 	ret = spi_sync(adis->spi, &adis->msg);
1054 	if (ret)
1055 		goto check_burst32;
1056 
1057 	buffer = adis->buffer;
1058 
1059 	crc = be16_to_cpu(buffer[offset + 2]);
1060 	valid = adis16475_validate_crc(adis->buffer, crc, st->burst32);
1061 	if (!valid) {
1062 		dev_err(&adis->spi->dev, "Invalid crc\n");
1063 		goto check_burst32;
1064 	}
1065 
1066 	for_each_set_bit(bit, indio_dev->active_scan_mask,
1067 			 indio_dev->masklength) {
1068 		/*
1069 		 * When burst mode is used, system flags is the first data
1070 		 * channel in the sequence, but the scan index is 7.
1071 		 */
1072 		switch (bit) {
1073 		case ADIS16475_SCAN_TEMP:
1074 			st->data[i++] = buffer[offset];
1075 			break;
1076 		case ADIS16475_SCAN_GYRO_X ... ADIS16475_SCAN_ACCEL_Z:
1077 			/*
1078 			 * The first 2 bytes on the received data are the
1079 			 * DIAG_STAT reg, hence the +1 offset here...
1080 			 */
1081 			if (st->burst32) {
1082 				/* upper 16 */
1083 				st->data[i++] = buffer[bit * 2 + 2];
1084 				/* lower 16 */
1085 				st->data[i++] = buffer[bit * 2 + 1];
1086 			} else {
1087 				st->data[i++] = buffer[bit + 1];
1088 				/*
1089 				 * Don't bother in doing the manual read if the
1090 				 * device supports burst32. burst32 will be
1091 				 * enabled in the next call to
1092 				 * adis16475_burst32_check()...
1093 				 */
1094 				if (st->lsb_flag && !st->info->has_burst32) {
1095 					u16 val = 0;
1096 					const u32 reg = ADIS16475_REG_X_GYRO_L +
1097 						bit * 4;
1098 
1099 					adis_read_reg_16(adis, reg, &val);
1100 					st->data[i++] = cpu_to_be16(val);
1101 				} else {
1102 					/* lower not used */
1103 					st->data[i++] = 0;
1104 				}
1105 			}
1106 			break;
1107 		}
1108 	}
1109 
1110 	iio_push_to_buffers_with_timestamp(indio_dev, st->data, pf->timestamp);
1111 check_burst32:
1112 	/*
1113 	 * We only check the burst mode at the end of the current capture since
1114 	 * it takes a full data ready cycle for the device to update the burst
1115 	 * array.
1116 	 */
1117 	adis16475_burst32_check(st);
1118 	iio_trigger_notify_done(indio_dev->trig);
1119 
1120 	return IRQ_HANDLED;
1121 }
1122 
1123 static int adis16475_config_sync_mode(struct adis16475 *st)
1124 {
1125 	int ret;
1126 	struct device *dev = &st->adis.spi->dev;
1127 	const struct adis16475_sync *sync;
1128 	u32 sync_mode;
1129 
1130 	/* default to internal clk */
1131 	st->clk_freq = st->info->int_clk * 1000;
1132 
1133 	ret = device_property_read_u32(dev, "adi,sync-mode", &sync_mode);
1134 	if (ret)
1135 		return 0;
1136 
1137 	if (sync_mode >= st->info->num_sync) {
1138 		dev_err(dev, "Invalid sync mode: %u for %s\n", sync_mode,
1139 			st->info->name);
1140 		return -EINVAL;
1141 	}
1142 
1143 	sync = &st->info->sync[sync_mode];
1144 	st->sync_mode = sync->sync_mode;
1145 
1146 	/* All the other modes require external input signal */
1147 	if (sync->sync_mode != ADIS16475_SYNC_OUTPUT) {
1148 		struct clk *clk = devm_clk_get_enabled(dev, NULL);
1149 
1150 		if (IS_ERR(clk))
1151 			return PTR_ERR(clk);
1152 
1153 		st->clk_freq = clk_get_rate(clk);
1154 		if (st->clk_freq < sync->min_rate ||
1155 		    st->clk_freq > sync->max_rate) {
1156 			dev_err(dev,
1157 				"Clk rate:%u not in a valid range:[%u %u]\n",
1158 				st->clk_freq, sync->min_rate, sync->max_rate);
1159 			return -EINVAL;
1160 		}
1161 
1162 		if (sync->sync_mode == ADIS16475_SYNC_SCALED) {
1163 			u16 up_scale;
1164 
1165 			/*
1166 			 * In sync scaled mode, the IMU sample rate is the clk_freq * sync_scale.
1167 			 * Hence, default the IMU sample rate to the highest multiple of the input
1168 			 * clock lower than the IMU max sample rate. The optimal range is
1169 			 * 1900-2100 sps...
1170 			 */
1171 			up_scale = 2100 / st->clk_freq;
1172 
1173 			ret = __adis_write_reg_16(&st->adis,
1174 						  ADIS16475_REG_UP_SCALE,
1175 						  up_scale);
1176 			if (ret)
1177 				return ret;
1178 		}
1179 
1180 		st->clk_freq *= 1000;
1181 	}
1182 	/*
1183 	 * Keep in mind that the mask for the clk modes in adis1650*
1184 	 * chips is different (1100 instead of 11100). However, we
1185 	 * are not configuring BIT(4) in these chips and the default
1186 	 * value is 0, so we are fine in doing the below operations.
1187 	 * I'm keeping this for simplicity and avoiding extra variables
1188 	 * in chip_info.
1189 	 */
1190 	ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
1191 				 ADIS16475_SYNC_MODE_MASK, sync->sync_mode);
1192 	if (ret)
1193 		return ret;
1194 
1195 	usleep_range(250, 260);
1196 
1197 	return 0;
1198 }
1199 
1200 static int adis16475_config_irq_pin(struct adis16475 *st)
1201 {
1202 	int ret;
1203 	struct irq_data *desc;
1204 	u32 irq_type;
1205 	u16 val = 0;
1206 	u8 polarity;
1207 	struct spi_device *spi = st->adis.spi;
1208 
1209 	desc = irq_get_irq_data(spi->irq);
1210 	if (!desc) {
1211 		dev_err(&spi->dev, "Could not find IRQ %d\n", spi->irq);
1212 		return -EINVAL;
1213 	}
1214 	/*
1215 	 * It is possible to configure the data ready polarity. Furthermore, we
1216 	 * need to update the adis struct if we want data ready as active low.
1217 	 */
1218 	irq_type = irqd_get_trigger_type(desc);
1219 	if (irq_type == IRQ_TYPE_EDGE_RISING) {
1220 		polarity = 1;
1221 		st->adis.irq_flag = IRQF_TRIGGER_RISING;
1222 	} else if (irq_type == IRQ_TYPE_EDGE_FALLING) {
1223 		polarity = 0;
1224 		st->adis.irq_flag = IRQF_TRIGGER_FALLING;
1225 	} else {
1226 		dev_err(&spi->dev, "Invalid interrupt type 0x%x specified\n",
1227 			irq_type);
1228 		return -EINVAL;
1229 	}
1230 
1231 	val = ADIS16475_MSG_CTRL_DR_POL(polarity);
1232 	ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL,
1233 				 ADIS16475_MSG_CTRL_DR_POL_MASK, val);
1234 	if (ret)
1235 		return ret;
1236 	/*
1237 	 * There is a delay writing to any bits written to the MSC_CTRL
1238 	 * register. It should not be bigger than 200us, so 250 should be more
1239 	 * than enough!
1240 	 */
1241 	usleep_range(250, 260);
1242 
1243 	return 0;
1244 }
1245 
1246 static const struct of_device_id adis16475_of_match[] = {
1247 	{ .compatible = "adi,adis16470",
1248 		.data = &adis16475_chip_info[ADIS16470] },
1249 	{ .compatible = "adi,adis16475-1",
1250 		.data = &adis16475_chip_info[ADIS16475_1] },
1251 	{ .compatible = "adi,adis16475-2",
1252 		.data = &adis16475_chip_info[ADIS16475_2] },
1253 	{ .compatible = "adi,adis16475-3",
1254 		.data = &adis16475_chip_info[ADIS16475_3] },
1255 	{ .compatible = "adi,adis16477-1",
1256 		.data = &adis16475_chip_info[ADIS16477_1] },
1257 	{ .compatible = "adi,adis16477-2",
1258 		.data = &adis16475_chip_info[ADIS16477_2] },
1259 	{ .compatible = "adi,adis16477-3",
1260 		.data = &adis16475_chip_info[ADIS16477_3] },
1261 	{ .compatible = "adi,adis16465-1",
1262 		.data = &adis16475_chip_info[ADIS16465_1] },
1263 	{ .compatible = "adi,adis16465-2",
1264 		.data = &adis16475_chip_info[ADIS16465_2] },
1265 	{ .compatible = "adi,adis16465-3",
1266 		.data = &adis16475_chip_info[ADIS16465_3] },
1267 	{ .compatible = "adi,adis16467-1",
1268 		.data = &adis16475_chip_info[ADIS16467_1] },
1269 	{ .compatible = "adi,adis16467-2",
1270 		.data = &adis16475_chip_info[ADIS16467_2] },
1271 	{ .compatible = "adi,adis16467-3",
1272 		.data = &adis16475_chip_info[ADIS16467_3] },
1273 	{ .compatible = "adi,adis16500",
1274 		.data = &adis16475_chip_info[ADIS16500] },
1275 	{ .compatible = "adi,adis16505-1",
1276 		.data = &adis16475_chip_info[ADIS16505_1] },
1277 	{ .compatible = "adi,adis16505-2",
1278 		.data = &adis16475_chip_info[ADIS16505_2] },
1279 	{ .compatible = "adi,adis16505-3",
1280 		.data = &adis16475_chip_info[ADIS16505_3] },
1281 	{ .compatible = "adi,adis16507-1",
1282 		.data = &adis16475_chip_info[ADIS16507_1] },
1283 	{ .compatible = "adi,adis16507-2",
1284 		.data = &adis16475_chip_info[ADIS16507_2] },
1285 	{ .compatible = "adi,adis16507-3",
1286 		.data = &adis16475_chip_info[ADIS16507_3] },
1287 	{ },
1288 };
1289 MODULE_DEVICE_TABLE(of, adis16475_of_match);
1290 
1291 static int adis16475_probe(struct spi_device *spi)
1292 {
1293 	struct iio_dev *indio_dev;
1294 	struct adis16475 *st;
1295 	int ret;
1296 
1297 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
1298 	if (!indio_dev)
1299 		return -ENOMEM;
1300 
1301 	st = iio_priv(indio_dev);
1302 
1303 	st->info = device_get_match_data(&spi->dev);
1304 	if (!st->info)
1305 		return -EINVAL;
1306 
1307 	ret = adis_init(&st->adis, indio_dev, spi, &st->info->adis_data);
1308 	if (ret)
1309 		return ret;
1310 
1311 	indio_dev->name = st->info->name;
1312 	indio_dev->channels = st->info->channels;
1313 	indio_dev->num_channels = st->info->num_channels;
1314 	indio_dev->info = &adis16475_info;
1315 	indio_dev->modes = INDIO_DIRECT_MODE;
1316 
1317 	ret = __adis_initial_startup(&st->adis);
1318 	if (ret)
1319 		return ret;
1320 
1321 	ret = adis16475_config_irq_pin(st);
1322 	if (ret)
1323 		return ret;
1324 
1325 	ret = adis16475_config_sync_mode(st);
1326 	if (ret)
1327 		return ret;
1328 
1329 	ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev,
1330 						 adis16475_trigger_handler);
1331 	if (ret)
1332 		return ret;
1333 
1334 	ret = devm_iio_device_register(&spi->dev, indio_dev);
1335 	if (ret)
1336 		return ret;
1337 
1338 	adis16475_debugfs_init(indio_dev);
1339 
1340 	return 0;
1341 }
1342 
1343 static struct spi_driver adis16475_driver = {
1344 	.driver = {
1345 		.name = "adis16475",
1346 		.of_match_table = adis16475_of_match,
1347 	},
1348 	.probe = adis16475_probe,
1349 };
1350 module_spi_driver(adis16475_driver);
1351 
1352 MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
1353 MODULE_DESCRIPTION("Analog Devices ADIS16475 IMU driver");
1354 MODULE_LICENSE("GPL");
1355 MODULE_IMPORT_NS(IIO_ADISLIB);
1356