1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * hdc100x.c - Support for the TI HDC100x temperature + humidity sensors 4 * 5 * Copyright (C) 2015, 2018 6 * Author: Matt Ranostay <matt.ranostay@konsulko.com> 7 * 8 * Datasheets: 9 * https://www.ti.com/product/HDC1000/datasheet 10 * https://www.ti.com/product/HDC1008/datasheet 11 * https://www.ti.com/product/HDC1010/datasheet 12 * https://www.ti.com/product/HDC1050/datasheet 13 * https://www.ti.com/product/HDC1080/datasheet 14 */ 15 16 #include <linux/delay.h> 17 #include <linux/module.h> 18 #include <linux/mod_devicetable.h> 19 #include <linux/init.h> 20 #include <linux/i2c.h> 21 22 #include <linux/iio/iio.h> 23 #include <linux/iio/sysfs.h> 24 #include <linux/iio/buffer.h> 25 #include <linux/iio/trigger_consumer.h> 26 #include <linux/iio/triggered_buffer.h> 27 28 #include <linux/time.h> 29 30 #define HDC100X_REG_TEMP 0x00 31 #define HDC100X_REG_HUMIDITY 0x01 32 33 #define HDC100X_REG_CONFIG 0x02 34 #define HDC100X_REG_CONFIG_ACQ_MODE BIT(12) 35 #define HDC100X_REG_CONFIG_HEATER_EN BIT(13) 36 37 struct hdc100x_data { 38 struct i2c_client *client; 39 struct mutex lock; 40 u16 config; 41 42 /* integration time of the sensor */ 43 int adc_int_us[2]; 44 /* Ensure natural alignment of timestamp */ 45 struct { 46 __be16 channels[2]; 47 s64 ts __aligned(8); 48 } scan; 49 }; 50 51 /* integration time in us */ 52 static const int hdc100x_int_time[][3] = { 53 { 6350, 3650, 0 }, /* IIO_TEMP channel*/ 54 { 6500, 3850, 2500 }, /* IIO_HUMIDITYRELATIVE channel */ 55 }; 56 57 /* HDC100X_REG_CONFIG shift and mask values */ 58 static const struct { 59 int shift; 60 int mask; 61 } hdc100x_resolution_shift[2] = { 62 { /* IIO_TEMP channel */ 63 .shift = 10, 64 .mask = 1 65 }, 66 { /* IIO_HUMIDITYRELATIVE channel */ 67 .shift = 8, 68 .mask = 3, 69 }, 70 }; 71 72 static IIO_CONST_ATTR(temp_integration_time_available, 73 "0.00365 0.00635"); 74 75 static IIO_CONST_ATTR(humidityrelative_integration_time_available, 76 "0.0025 0.00385 0.0065"); 77 78 static IIO_CONST_ATTR(out_current_heater_raw_available, 79 "0 1"); 80 81 static struct attribute *hdc100x_attributes[] = { 82 &iio_const_attr_temp_integration_time_available.dev_attr.attr, 83 &iio_const_attr_humidityrelative_integration_time_available.dev_attr.attr, 84 &iio_const_attr_out_current_heater_raw_available.dev_attr.attr, 85 NULL 86 }; 87 88 static const struct attribute_group hdc100x_attribute_group = { 89 .attrs = hdc100x_attributes, 90 }; 91 92 static const struct iio_chan_spec hdc100x_channels[] = { 93 { 94 .type = IIO_TEMP, 95 .address = HDC100X_REG_TEMP, 96 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 97 BIT(IIO_CHAN_INFO_SCALE) | 98 BIT(IIO_CHAN_INFO_INT_TIME) | 99 BIT(IIO_CHAN_INFO_OFFSET), 100 .scan_index = 0, 101 .scan_type = { 102 .sign = 's', 103 .realbits = 16, 104 .storagebits = 16, 105 .endianness = IIO_BE, 106 }, 107 }, 108 { 109 .type = IIO_HUMIDITYRELATIVE, 110 .address = HDC100X_REG_HUMIDITY, 111 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 112 BIT(IIO_CHAN_INFO_SCALE) | 113 BIT(IIO_CHAN_INFO_INT_TIME), 114 .scan_index = 1, 115 .scan_type = { 116 .sign = 'u', 117 .realbits = 16, 118 .storagebits = 16, 119 .endianness = IIO_BE, 120 }, 121 }, 122 { 123 .type = IIO_CURRENT, 124 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 125 .extend_name = "heater", 126 .output = 1, 127 .scan_index = -1, 128 }, 129 IIO_CHAN_SOFT_TIMESTAMP(2), 130 }; 131 132 static const unsigned long hdc100x_scan_masks[] = {0x3, 0}; 133 134 static int hdc100x_update_config(struct hdc100x_data *data, int mask, int val) 135 { 136 int tmp = (~mask & data->config) | val; 137 int ret; 138 139 ret = i2c_smbus_write_word_swapped(data->client, 140 HDC100X_REG_CONFIG, tmp); 141 if (!ret) 142 data->config = tmp; 143 144 return ret; 145 } 146 147 static int hdc100x_set_it_time(struct hdc100x_data *data, int chan, int val2) 148 { 149 int shift = hdc100x_resolution_shift[chan].shift; 150 int ret = -EINVAL; 151 int i; 152 153 for (i = 0; i < ARRAY_SIZE(hdc100x_int_time[chan]); i++) { 154 if (val2 && val2 == hdc100x_int_time[chan][i]) { 155 ret = hdc100x_update_config(data, 156 hdc100x_resolution_shift[chan].mask << shift, 157 i << shift); 158 if (!ret) 159 data->adc_int_us[chan] = val2; 160 break; 161 } 162 } 163 164 return ret; 165 } 166 167 static int hdc100x_get_measurement(struct hdc100x_data *data, 168 struct iio_chan_spec const *chan) 169 { 170 struct i2c_client *client = data->client; 171 int delay = data->adc_int_us[chan->address] + 1*USEC_PER_MSEC; 172 int ret; 173 __be16 val; 174 175 /* start measurement */ 176 ret = i2c_smbus_write_byte(client, chan->address); 177 if (ret < 0) { 178 dev_err(&client->dev, "cannot start measurement"); 179 return ret; 180 } 181 182 /* wait for integration time to pass */ 183 usleep_range(delay, delay + 1000); 184 185 /* read measurement */ 186 ret = i2c_master_recv(data->client, (char *)&val, sizeof(val)); 187 if (ret < 0) { 188 dev_err(&client->dev, "cannot read sensor data\n"); 189 return ret; 190 } 191 return be16_to_cpu(val); 192 } 193 194 static int hdc100x_get_heater_status(struct hdc100x_data *data) 195 { 196 return !!(data->config & HDC100X_REG_CONFIG_HEATER_EN); 197 } 198 199 static int hdc100x_read_raw(struct iio_dev *indio_dev, 200 struct iio_chan_spec const *chan, int *val, 201 int *val2, long mask) 202 { 203 struct hdc100x_data *data = iio_priv(indio_dev); 204 205 switch (mask) { 206 case IIO_CHAN_INFO_RAW: { 207 int ret; 208 209 mutex_lock(&data->lock); 210 if (chan->type == IIO_CURRENT) { 211 *val = hdc100x_get_heater_status(data); 212 ret = IIO_VAL_INT; 213 } else { 214 ret = iio_device_claim_direct_mode(indio_dev); 215 if (ret) { 216 mutex_unlock(&data->lock); 217 return ret; 218 } 219 220 ret = hdc100x_get_measurement(data, chan); 221 iio_device_release_direct_mode(indio_dev); 222 if (ret >= 0) { 223 *val = ret; 224 ret = IIO_VAL_INT; 225 } 226 } 227 mutex_unlock(&data->lock); 228 return ret; 229 } 230 case IIO_CHAN_INFO_INT_TIME: 231 *val = 0; 232 *val2 = data->adc_int_us[chan->address]; 233 return IIO_VAL_INT_PLUS_MICRO; 234 case IIO_CHAN_INFO_SCALE: 235 if (chan->type == IIO_TEMP) { 236 *val = 165000; 237 *val2 = 65536; 238 return IIO_VAL_FRACTIONAL; 239 } else { 240 *val = 100000; 241 *val2 = 65536; 242 return IIO_VAL_FRACTIONAL; 243 } 244 break; 245 case IIO_CHAN_INFO_OFFSET: 246 *val = -15887; 247 *val2 = 515151; 248 return IIO_VAL_INT_PLUS_MICRO; 249 default: 250 return -EINVAL; 251 } 252 } 253 254 static int hdc100x_write_raw(struct iio_dev *indio_dev, 255 struct iio_chan_spec const *chan, 256 int val, int val2, long mask) 257 { 258 struct hdc100x_data *data = iio_priv(indio_dev); 259 int ret = -EINVAL; 260 261 switch (mask) { 262 case IIO_CHAN_INFO_INT_TIME: 263 if (val != 0) 264 return -EINVAL; 265 266 mutex_lock(&data->lock); 267 ret = hdc100x_set_it_time(data, chan->address, val2); 268 mutex_unlock(&data->lock); 269 return ret; 270 case IIO_CHAN_INFO_RAW: 271 if (chan->type != IIO_CURRENT || val2 != 0) 272 return -EINVAL; 273 274 mutex_lock(&data->lock); 275 ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_HEATER_EN, 276 val ? HDC100X_REG_CONFIG_HEATER_EN : 0); 277 mutex_unlock(&data->lock); 278 return ret; 279 default: 280 return -EINVAL; 281 } 282 } 283 284 static int hdc100x_buffer_postenable(struct iio_dev *indio_dev) 285 { 286 struct hdc100x_data *data = iio_priv(indio_dev); 287 int ret; 288 289 /* Buffer is enabled. First set ACQ Mode, then attach poll func */ 290 mutex_lock(&data->lock); 291 ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 292 HDC100X_REG_CONFIG_ACQ_MODE); 293 mutex_unlock(&data->lock); 294 295 return ret; 296 } 297 298 static int hdc100x_buffer_predisable(struct iio_dev *indio_dev) 299 { 300 struct hdc100x_data *data = iio_priv(indio_dev); 301 int ret; 302 303 mutex_lock(&data->lock); 304 ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0); 305 mutex_unlock(&data->lock); 306 307 return ret; 308 } 309 310 static const struct iio_buffer_setup_ops hdc_buffer_setup_ops = { 311 .postenable = hdc100x_buffer_postenable, 312 .predisable = hdc100x_buffer_predisable, 313 }; 314 315 static irqreturn_t hdc100x_trigger_handler(int irq, void *p) 316 { 317 struct iio_poll_func *pf = p; 318 struct iio_dev *indio_dev = pf->indio_dev; 319 struct hdc100x_data *data = iio_priv(indio_dev); 320 struct i2c_client *client = data->client; 321 int delay = data->adc_int_us[0] + data->adc_int_us[1] + 2*USEC_PER_MSEC; 322 int ret; 323 324 /* dual read starts at temp register */ 325 mutex_lock(&data->lock); 326 ret = i2c_smbus_write_byte(client, HDC100X_REG_TEMP); 327 if (ret < 0) { 328 dev_err(&client->dev, "cannot start measurement\n"); 329 goto err; 330 } 331 usleep_range(delay, delay + 1000); 332 333 ret = i2c_master_recv(client, (u8 *)data->scan.channels, 4); 334 if (ret < 0) { 335 dev_err(&client->dev, "cannot read sensor data\n"); 336 goto err; 337 } 338 339 iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, 340 iio_get_time_ns(indio_dev)); 341 err: 342 mutex_unlock(&data->lock); 343 iio_trigger_notify_done(indio_dev->trig); 344 345 return IRQ_HANDLED; 346 } 347 348 static const struct iio_info hdc100x_info = { 349 .read_raw = hdc100x_read_raw, 350 .write_raw = hdc100x_write_raw, 351 .attrs = &hdc100x_attribute_group, 352 }; 353 354 static int hdc100x_probe(struct i2c_client *client) 355 { 356 struct iio_dev *indio_dev; 357 struct hdc100x_data *data; 358 int ret; 359 360 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | 361 I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C)) 362 return -EOPNOTSUPP; 363 364 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 365 if (!indio_dev) 366 return -ENOMEM; 367 368 data = iio_priv(indio_dev); 369 i2c_set_clientdata(client, indio_dev); 370 data->client = client; 371 mutex_init(&data->lock); 372 373 indio_dev->name = dev_name(&client->dev); 374 indio_dev->modes = INDIO_DIRECT_MODE; 375 indio_dev->info = &hdc100x_info; 376 377 indio_dev->channels = hdc100x_channels; 378 indio_dev->num_channels = ARRAY_SIZE(hdc100x_channels); 379 indio_dev->available_scan_masks = hdc100x_scan_masks; 380 381 /* be sure we are in a known state */ 382 hdc100x_set_it_time(data, 0, hdc100x_int_time[0][0]); 383 hdc100x_set_it_time(data, 1, hdc100x_int_time[1][0]); 384 hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0); 385 386 ret = devm_iio_triggered_buffer_setup(&client->dev, 387 indio_dev, NULL, 388 hdc100x_trigger_handler, 389 &hdc_buffer_setup_ops); 390 if (ret < 0) { 391 dev_err(&client->dev, "iio triggered buffer setup failed\n"); 392 return ret; 393 } 394 395 return devm_iio_device_register(&client->dev, indio_dev); 396 } 397 398 static const struct i2c_device_id hdc100x_id[] = { 399 { "hdc100x", 0 }, 400 { "hdc1000", 0 }, 401 { "hdc1008", 0 }, 402 { "hdc1010", 0 }, 403 { "hdc1050", 0 }, 404 { "hdc1080", 0 }, 405 { } 406 }; 407 MODULE_DEVICE_TABLE(i2c, hdc100x_id); 408 409 static const struct of_device_id hdc100x_dt_ids[] = { 410 { .compatible = "ti,hdc1000" }, 411 { .compatible = "ti,hdc1008" }, 412 { .compatible = "ti,hdc1010" }, 413 { .compatible = "ti,hdc1050" }, 414 { .compatible = "ti,hdc1080" }, 415 { } 416 }; 417 MODULE_DEVICE_TABLE(of, hdc100x_dt_ids); 418 419 static const struct acpi_device_id hdc100x_acpi_match[] = { 420 { "TXNW1010" }, 421 { } 422 }; 423 MODULE_DEVICE_TABLE(acpi, hdc100x_acpi_match); 424 425 static struct i2c_driver hdc100x_driver = { 426 .driver = { 427 .name = "hdc100x", 428 .of_match_table = hdc100x_dt_ids, 429 .acpi_match_table = hdc100x_acpi_match, 430 }, 431 .probe = hdc100x_probe, 432 .id_table = hdc100x_id, 433 }; 434 module_i2c_driver(hdc100x_driver); 435 436 MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>"); 437 MODULE_DESCRIPTION("TI HDC100x humidity and temperature sensor driver"); 438 MODULE_LICENSE("GPL"); 439