xref: /openbmc/linux/drivers/iio/health/max30102.c (revision 36fe4655)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * max30102.c - Support for MAX30102 heart rate and pulse oximeter sensor
4  *
5  * Copyright (C) 2017 Matt Ranostay <matt.ranostay@konsulko.com>
6  *
7  * Support for MAX30105 optical particle sensor
8  * Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
9  *
10  * 7-bit I2C chip address: 0x57
11  * TODO: proximity power saving feature
12  */
13 
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/delay.h>
18 #include <linux/err.h>
19 #include <linux/irq.h>
20 #include <linux/i2c.h>
21 #include <linux/mutex.h>
22 #include <linux/mod_devicetable.h>
23 #include <linux/regmap.h>
24 #include <linux/iio/iio.h>
25 #include <linux/iio/buffer.h>
26 #include <linux/iio/kfifo_buf.h>
27 
28 #define MAX30102_REGMAP_NAME	"max30102_regmap"
29 #define MAX30102_DRV_NAME	"max30102"
30 #define MAX30102_PART_NUMBER	0x15
31 
32 enum max30102_chip_id {
33 	max30102,
34 	max30105,
35 };
36 
37 enum max3012_led_idx {
38 	MAX30102_LED_RED,
39 	MAX30102_LED_IR,
40 	MAX30105_LED_GREEN,
41 };
42 
43 #define MAX30102_REG_INT_STATUS			0x00
44 #define MAX30102_REG_INT_STATUS_PWR_RDY		BIT(0)
45 #define MAX30102_REG_INT_STATUS_PROX_INT	BIT(4)
46 #define MAX30102_REG_INT_STATUS_ALC_OVF		BIT(5)
47 #define MAX30102_REG_INT_STATUS_PPG_RDY		BIT(6)
48 #define MAX30102_REG_INT_STATUS_FIFO_RDY	BIT(7)
49 
50 #define MAX30102_REG_INT_ENABLE			0x02
51 #define MAX30102_REG_INT_ENABLE_PROX_INT_EN	BIT(4)
52 #define MAX30102_REG_INT_ENABLE_ALC_OVF_EN	BIT(5)
53 #define MAX30102_REG_INT_ENABLE_PPG_EN		BIT(6)
54 #define MAX30102_REG_INT_ENABLE_FIFO_EN		BIT(7)
55 #define MAX30102_REG_INT_ENABLE_MASK		0xf0
56 #define MAX30102_REG_INT_ENABLE_MASK_SHIFT	4
57 
58 #define MAX30102_REG_FIFO_WR_PTR		0x04
59 #define MAX30102_REG_FIFO_OVR_CTR		0x05
60 #define MAX30102_REG_FIFO_RD_PTR		0x06
61 #define MAX30102_REG_FIFO_DATA			0x07
62 #define MAX30102_REG_FIFO_DATA_BYTES		3
63 
64 #define MAX30102_REG_FIFO_CONFIG		0x08
65 #define MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES	BIT(1)
66 #define MAX30102_REG_FIFO_CONFIG_AVG_SHIFT	5
67 #define MAX30102_REG_FIFO_CONFIG_AFULL		BIT(0)
68 
69 #define MAX30102_REG_MODE_CONFIG		0x09
70 #define MAX30102_REG_MODE_CONFIG_MODE_NONE	0x00
71 #define MAX30102_REG_MODE_CONFIG_MODE_HR	0x02 /* red LED */
72 #define MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2	0x03 /* red + IR LED */
73 #define MAX30102_REG_MODE_CONFIG_MODE_MULTI	0x07 /* multi-LED mode */
74 #define MAX30102_REG_MODE_CONFIG_MODE_MASK	GENMASK(2, 0)
75 #define MAX30102_REG_MODE_CONFIG_PWR		BIT(7)
76 
77 #define MAX30102_REG_MODE_CONTROL_SLOT21	0x11 /* multi-LED control */
78 #define MAX30102_REG_MODE_CONTROL_SLOT43	0x12
79 #define MAX30102_REG_MODE_CONTROL_SLOT_MASK	(GENMASK(6, 4) | GENMASK(2, 0))
80 #define MAX30102_REG_MODE_CONTROL_SLOT_SHIFT	4
81 
82 #define MAX30102_REG_SPO2_CONFIG		0x0a
83 #define MAX30102_REG_SPO2_CONFIG_PULSE_411_US	0x03
84 #define MAX30102_REG_SPO2_CONFIG_SR_400HZ	0x03
85 #define MAX30102_REG_SPO2_CONFIG_SR_MASK	0x07
86 #define MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT	2
87 #define MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS	BIT(0)
88 #define MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT	5
89 
90 #define MAX30102_REG_RED_LED_CONFIG		0x0c
91 #define MAX30102_REG_IR_LED_CONFIG		0x0d
92 #define MAX30105_REG_GREEN_LED_CONFIG		0x0e
93 
94 #define MAX30102_REG_TEMP_CONFIG		0x21
95 #define MAX30102_REG_TEMP_CONFIG_TEMP_EN	BIT(0)
96 
97 #define MAX30102_REG_TEMP_INTEGER		0x1f
98 #define MAX30102_REG_TEMP_FRACTION		0x20
99 
100 #define MAX30102_REG_REV_ID			0xfe
101 #define MAX30102_REG_PART_ID			0xff
102 
103 struct max30102_data {
104 	struct i2c_client *client;
105 	struct iio_dev *indio_dev;
106 	struct mutex lock;
107 	struct regmap *regmap;
108 	enum max30102_chip_id chip_id;
109 
110 	u8 buffer[12];
111 	__be32 processed_buffer[3]; /* 3 x 18-bit (padded to 32-bits) */
112 };
113 
114 static const struct regmap_config max30102_regmap_config = {
115 	.name = MAX30102_REGMAP_NAME,
116 
117 	.reg_bits = 8,
118 	.val_bits = 8,
119 };
120 
121 static const unsigned long max30102_scan_masks[] = {
122 	BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
123 	0
124 };
125 
126 static const unsigned long max30105_scan_masks[] = {
127 	BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
128 	BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
129 		BIT(MAX30105_LED_GREEN),
130 	0
131 };
132 
133 #define MAX30102_INTENSITY_CHANNEL(_si, _mod) { \
134 		.type = IIO_INTENSITY, \
135 		.channel2 = _mod, \
136 		.modified = 1, \
137 		.scan_index = _si, \
138 		.scan_type = { \
139 			.sign = 'u', \
140 			.shift = 8, \
141 			.realbits = 18, \
142 			.storagebits = 32, \
143 			.endianness = IIO_BE, \
144 		}, \
145 	}
146 
147 static const struct iio_chan_spec max30102_channels[] = {
148 	MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
149 	MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
150 	{
151 		.type = IIO_TEMP,
152 		.info_mask_separate =
153 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
154 		.scan_index = -1,
155 	},
156 };
157 
158 static const struct iio_chan_spec max30105_channels[] = {
159 	MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
160 	MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
161 	MAX30102_INTENSITY_CHANNEL(MAX30105_LED_GREEN, IIO_MOD_LIGHT_GREEN),
162 	{
163 		.type = IIO_TEMP,
164 		.info_mask_separate =
165 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
166 		.scan_index = -1,
167 	},
168 };
169 
170 static int max30102_set_power(struct max30102_data *data, bool en)
171 {
172 	return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
173 				  MAX30102_REG_MODE_CONFIG_PWR,
174 				  en ? 0 : MAX30102_REG_MODE_CONFIG_PWR);
175 }
176 
177 static int max30102_set_powermode(struct max30102_data *data, u8 mode, bool en)
178 {
179 	u8 reg = mode;
180 
181 	if (!en)
182 		reg |= MAX30102_REG_MODE_CONFIG_PWR;
183 
184 	return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
185 				  MAX30102_REG_MODE_CONFIG_PWR |
186 				  MAX30102_REG_MODE_CONFIG_MODE_MASK, reg);
187 }
188 
189 #define MAX30102_MODE_CONTROL_LED_SLOTS(slot2, slot1) \
190 	((slot2 << MAX30102_REG_MODE_CONTROL_SLOT_SHIFT) | slot1)
191 
192 static int max30102_buffer_postenable(struct iio_dev *indio_dev)
193 {
194 	struct max30102_data *data = iio_priv(indio_dev);
195 	int ret;
196 	u8 reg;
197 
198 	switch (*indio_dev->active_scan_mask) {
199 	case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR):
200 		reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
201 		break;
202 	case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
203 	     BIT(MAX30105_LED_GREEN):
204 		ret = regmap_update_bits(data->regmap,
205 					 MAX30102_REG_MODE_CONTROL_SLOT21,
206 					 MAX30102_REG_MODE_CONTROL_SLOT_MASK,
207 					 MAX30102_MODE_CONTROL_LED_SLOTS(2, 1));
208 		if (ret)
209 			return ret;
210 
211 		ret = regmap_update_bits(data->regmap,
212 					 MAX30102_REG_MODE_CONTROL_SLOT43,
213 					 MAX30102_REG_MODE_CONTROL_SLOT_MASK,
214 					 MAX30102_MODE_CONTROL_LED_SLOTS(0, 3));
215 		if (ret)
216 			return ret;
217 
218 		reg = MAX30102_REG_MODE_CONFIG_MODE_MULTI;
219 		break;
220 	default:
221 		return -EINVAL;
222 	}
223 
224 	return max30102_set_powermode(data, reg, true);
225 }
226 
227 static int max30102_buffer_predisable(struct iio_dev *indio_dev)
228 {
229 	struct max30102_data *data = iio_priv(indio_dev);
230 
231 	return max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE,
232 				      false);
233 }
234 
235 static const struct iio_buffer_setup_ops max30102_buffer_setup_ops = {
236 	.postenable = max30102_buffer_postenable,
237 	.predisable = max30102_buffer_predisable,
238 };
239 
240 static inline int max30102_fifo_count(struct max30102_data *data)
241 {
242 	unsigned int val;
243 	int ret;
244 
245 	ret = regmap_read(data->regmap, MAX30102_REG_INT_STATUS, &val);
246 	if (ret)
247 		return ret;
248 
249 	/* FIFO has one sample slot left */
250 	if (val & MAX30102_REG_INT_STATUS_FIFO_RDY)
251 		return 1;
252 
253 	return 0;
254 }
255 
256 #define MAX30102_COPY_DATA(i) \
257 	memcpy(&data->processed_buffer[(i)], \
258 	       &buffer[(i) * MAX30102_REG_FIFO_DATA_BYTES], \
259 	       MAX30102_REG_FIFO_DATA_BYTES)
260 
261 static int max30102_read_measurement(struct max30102_data *data,
262 				     unsigned int measurements)
263 {
264 	int ret;
265 	u8 *buffer = (u8 *) &data->buffer;
266 
267 	ret = i2c_smbus_read_i2c_block_data(data->client,
268 					    MAX30102_REG_FIFO_DATA,
269 					    measurements *
270 					    MAX30102_REG_FIFO_DATA_BYTES,
271 					    buffer);
272 
273 	switch (measurements) {
274 	case 3:
275 		MAX30102_COPY_DATA(2);
276 		fallthrough;
277 	case 2:
278 		MAX30102_COPY_DATA(1);
279 		fallthrough;
280 	case 1:
281 		MAX30102_COPY_DATA(0);
282 		break;
283 	default:
284 		return -EINVAL;
285 	}
286 
287 	return (ret == measurements * MAX30102_REG_FIFO_DATA_BYTES) ?
288 	       0 : -EINVAL;
289 }
290 
291 static irqreturn_t max30102_interrupt_handler(int irq, void *private)
292 {
293 	struct iio_dev *indio_dev = private;
294 	struct max30102_data *data = iio_priv(indio_dev);
295 	unsigned int measurements = bitmap_weight(indio_dev->active_scan_mask,
296 						  indio_dev->masklength);
297 	int ret, cnt = 0;
298 
299 	mutex_lock(&data->lock);
300 
301 	while (cnt || (cnt = max30102_fifo_count(data)) > 0) {
302 		ret = max30102_read_measurement(data, measurements);
303 		if (ret)
304 			break;
305 
306 		iio_push_to_buffers(data->indio_dev, data->processed_buffer);
307 		cnt--;
308 	}
309 
310 	mutex_unlock(&data->lock);
311 
312 	return IRQ_HANDLED;
313 }
314 
315 static int max30102_get_current_idx(unsigned int val, int *reg)
316 {
317 	/* each step is 0.200 mA */
318 	*reg = val / 200;
319 
320 	return *reg > 0xff ? -EINVAL : 0;
321 }
322 
323 static int max30102_led_init(struct max30102_data *data)
324 {
325 	struct device *dev = &data->client->dev;
326 	unsigned int val;
327 	int reg, ret;
328 
329 	ret = device_property_read_u32(dev, "maxim,red-led-current-microamp", &val);
330 	if (ret) {
331 		dev_info(dev, "no red-led-current-microamp set\n");
332 
333 		/* Default to 7 mA RED LED */
334 		val = 7000;
335 	}
336 
337 	ret = max30102_get_current_idx(val, &reg);
338 	if (ret) {
339 		dev_err(dev, "invalid RED LED current setting %d\n", val);
340 		return ret;
341 	}
342 
343 	ret = regmap_write(data->regmap, MAX30102_REG_RED_LED_CONFIG, reg);
344 	if (ret)
345 		return ret;
346 
347 	if (data->chip_id == max30105) {
348 		ret = device_property_read_u32(dev,
349 			"maxim,green-led-current-microamp", &val);
350 		if (ret) {
351 			dev_info(dev, "no green-led-current-microamp set\n");
352 
353 			/* Default to 7 mA green LED */
354 			val = 7000;
355 		}
356 
357 		ret = max30102_get_current_idx(val, &reg);
358 		if (ret) {
359 			dev_err(dev, "invalid green LED current setting %d\n",
360 				val);
361 			return ret;
362 		}
363 
364 		ret = regmap_write(data->regmap, MAX30105_REG_GREEN_LED_CONFIG,
365 				   reg);
366 		if (ret)
367 			return ret;
368 	}
369 
370 	ret = device_property_read_u32(dev, "maxim,ir-led-current-microamp", &val);
371 	if (ret) {
372 		dev_info(dev, "no ir-led-current-microamp set\n");
373 
374 		/* Default to 7 mA IR LED */
375 		val = 7000;
376 	}
377 
378 	ret = max30102_get_current_idx(val, &reg);
379 	if (ret) {
380 		dev_err(dev, "invalid IR LED current setting %d\n", val);
381 		return ret;
382 	}
383 
384 	return regmap_write(data->regmap, MAX30102_REG_IR_LED_CONFIG, reg);
385 }
386 
387 static int max30102_chip_init(struct max30102_data *data)
388 {
389 	int ret;
390 
391 	/* setup LED current settings */
392 	ret = max30102_led_init(data);
393 	if (ret)
394 		return ret;
395 
396 	/* configure 18-bit HR + SpO2 readings at 400Hz */
397 	ret = regmap_write(data->regmap, MAX30102_REG_SPO2_CONFIG,
398 				(MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS
399 				 << MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT) |
400 				(MAX30102_REG_SPO2_CONFIG_SR_400HZ
401 				 << MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT) |
402 				 MAX30102_REG_SPO2_CONFIG_PULSE_411_US);
403 	if (ret)
404 		return ret;
405 
406 	/* average 4 samples + generate FIFO interrupt */
407 	ret = regmap_write(data->regmap, MAX30102_REG_FIFO_CONFIG,
408 				(MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES
409 				 << MAX30102_REG_FIFO_CONFIG_AVG_SHIFT) |
410 				 MAX30102_REG_FIFO_CONFIG_AFULL);
411 	if (ret)
412 		return ret;
413 
414 	/* enable FIFO interrupt */
415 	return regmap_update_bits(data->regmap, MAX30102_REG_INT_ENABLE,
416 				 MAX30102_REG_INT_ENABLE_MASK,
417 				 MAX30102_REG_INT_ENABLE_FIFO_EN);
418 }
419 
420 static int max30102_read_temp(struct max30102_data *data, int *val)
421 {
422 	int ret;
423 	unsigned int reg;
424 
425 	ret = regmap_read(data->regmap, MAX30102_REG_TEMP_INTEGER, &reg);
426 	if (ret < 0)
427 		return ret;
428 	*val = reg << 4;
429 
430 	ret = regmap_read(data->regmap, MAX30102_REG_TEMP_FRACTION, &reg);
431 	if (ret < 0)
432 		return ret;
433 
434 	*val |= reg & 0xf;
435 	*val = sign_extend32(*val, 11);
436 
437 	return 0;
438 }
439 
440 static int max30102_get_temp(struct max30102_data *data, int *val, bool en)
441 {
442 	int ret;
443 
444 	if (en) {
445 		ret = max30102_set_power(data, true);
446 		if (ret)
447 			return ret;
448 	}
449 
450 	/* start acquisition */
451 	ret = regmap_update_bits(data->regmap, MAX30102_REG_TEMP_CONFIG,
452 				 MAX30102_REG_TEMP_CONFIG_TEMP_EN,
453 				 MAX30102_REG_TEMP_CONFIG_TEMP_EN);
454 	if (ret)
455 		goto out;
456 
457 	msleep(35);
458 	ret = max30102_read_temp(data, val);
459 
460 out:
461 	if (en)
462 		max30102_set_power(data, false);
463 
464 	return ret;
465 }
466 
467 static int max30102_read_raw(struct iio_dev *indio_dev,
468 			     struct iio_chan_spec const *chan,
469 			     int *val, int *val2, long mask)
470 {
471 	struct max30102_data *data = iio_priv(indio_dev);
472 	int ret = -EINVAL;
473 
474 	switch (mask) {
475 	case IIO_CHAN_INFO_RAW:
476 		/*
477 		 * Temperature reading can only be acquired when not in
478 		 * shutdown; leave shutdown briefly when buffer not running
479 		 */
480 		mutex_lock(&indio_dev->mlock);
481 		if (!iio_buffer_enabled(indio_dev))
482 			ret = max30102_get_temp(data, val, true);
483 		else
484 			ret = max30102_get_temp(data, val, false);
485 		mutex_unlock(&indio_dev->mlock);
486 		if (ret)
487 			return ret;
488 
489 		ret = IIO_VAL_INT;
490 		break;
491 	case IIO_CHAN_INFO_SCALE:
492 		*val = 1000;  /* 62.5 */
493 		*val2 = 16;
494 		ret = IIO_VAL_FRACTIONAL;
495 		break;
496 	}
497 
498 	return ret;
499 }
500 
501 static const struct iio_info max30102_info = {
502 	.read_raw = max30102_read_raw,
503 };
504 
505 static int max30102_probe(struct i2c_client *client,
506 			  const struct i2c_device_id *id)
507 {
508 	struct max30102_data *data;
509 	struct iio_buffer *buffer;
510 	struct iio_dev *indio_dev;
511 	int ret;
512 	unsigned int reg;
513 
514 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
515 	if (!indio_dev)
516 		return -ENOMEM;
517 
518 	buffer = devm_iio_kfifo_allocate(&client->dev);
519 	if (!buffer)
520 		return -ENOMEM;
521 
522 	iio_device_attach_buffer(indio_dev, buffer);
523 
524 	indio_dev->name = MAX30102_DRV_NAME;
525 	indio_dev->info = &max30102_info;
526 	indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE);
527 	indio_dev->setup_ops = &max30102_buffer_setup_ops;
528 
529 	data = iio_priv(indio_dev);
530 	data->indio_dev = indio_dev;
531 	data->client = client;
532 	data->chip_id = id->driver_data;
533 
534 	mutex_init(&data->lock);
535 	i2c_set_clientdata(client, indio_dev);
536 
537 	switch (data->chip_id) {
538 	case max30105:
539 		indio_dev->channels = max30105_channels;
540 		indio_dev->num_channels = ARRAY_SIZE(max30105_channels);
541 		indio_dev->available_scan_masks = max30105_scan_masks;
542 		break;
543 	case max30102:
544 		indio_dev->channels = max30102_channels;
545 		indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
546 		indio_dev->available_scan_masks = max30102_scan_masks;
547 		break;
548 	default:
549 		return -ENODEV;
550 	}
551 
552 	data->regmap = devm_regmap_init_i2c(client, &max30102_regmap_config);
553 	if (IS_ERR(data->regmap)) {
554 		dev_err(&client->dev, "regmap initialization failed\n");
555 		return PTR_ERR(data->regmap);
556 	}
557 
558 	/* check part ID */
559 	ret = regmap_read(data->regmap, MAX30102_REG_PART_ID, &reg);
560 	if (ret)
561 		return ret;
562 	if (reg != MAX30102_PART_NUMBER)
563 		return -ENODEV;
564 
565 	/* show revision ID */
566 	ret = regmap_read(data->regmap, MAX30102_REG_REV_ID, &reg);
567 	if (ret)
568 		return ret;
569 	dev_dbg(&client->dev, "max3010x revision %02x\n", reg);
570 
571 	/* clear mode setting, chip shutdown */
572 	ret = max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE,
573 				     false);
574 	if (ret)
575 		return ret;
576 
577 	ret = max30102_chip_init(data);
578 	if (ret)
579 		return ret;
580 
581 	if (client->irq <= 0) {
582 		dev_err(&client->dev, "no valid irq defined\n");
583 		return -EINVAL;
584 	}
585 
586 	ret = devm_request_threaded_irq(&client->dev, client->irq,
587 					NULL, max30102_interrupt_handler,
588 					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
589 					"max30102_irq", indio_dev);
590 	if (ret) {
591 		dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
592 		return ret;
593 	}
594 
595 	return iio_device_register(indio_dev);
596 }
597 
598 static int max30102_remove(struct i2c_client *client)
599 {
600 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
601 	struct max30102_data *data = iio_priv(indio_dev);
602 
603 	iio_device_unregister(indio_dev);
604 	max30102_set_power(data, false);
605 
606 	return 0;
607 }
608 
609 static const struct i2c_device_id max30102_id[] = {
610 	{ "max30102", max30102 },
611 	{ "max30105", max30105 },
612 	{}
613 };
614 MODULE_DEVICE_TABLE(i2c, max30102_id);
615 
616 static const struct of_device_id max30102_dt_ids[] = {
617 	{ .compatible = "maxim,max30102" },
618 	{ .compatible = "maxim,max30105" },
619 	{ }
620 };
621 MODULE_DEVICE_TABLE(of, max30102_dt_ids);
622 
623 static struct i2c_driver max30102_driver = {
624 	.driver = {
625 		.name	= MAX30102_DRV_NAME,
626 		.of_match_table	= max30102_dt_ids,
627 	},
628 	.probe		= max30102_probe,
629 	.remove		= max30102_remove,
630 	.id_table	= max30102_id,
631 };
632 module_i2c_driver(max30102_driver);
633 
634 MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
635 MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver");
636 MODULE_LICENSE("GPL");
637