1 /* 2 * HID Sensors Driver 3 * Copyright (c) 2012, Intel Corporation. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms and conditions of the GNU General Public License, 7 * version 2, as published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program; if not, write to the Free Software Foundation, Inc., 16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 17 * 18 */ 19 #include <linux/device.h> 20 #include <linux/platform_device.h> 21 #include <linux/module.h> 22 #include <linux/interrupt.h> 23 #include <linux/irq.h> 24 #include <linux/slab.h> 25 #include <linux/delay.h> 26 #include <linux/hid-sensor-hub.h> 27 #include <linux/iio/iio.h> 28 #include <linux/iio/sysfs.h> 29 #include <linux/iio/buffer.h> 30 #include <linux/iio/trigger_consumer.h> 31 #include <linux/iio/triggered_buffer.h> 32 #include "../common/hid-sensors/hid-sensor-trigger.h" 33 34 enum gyro_3d_channel { 35 CHANNEL_SCAN_INDEX_X, 36 CHANNEL_SCAN_INDEX_Y, 37 CHANNEL_SCAN_INDEX_Z, 38 GYRO_3D_CHANNEL_MAX, 39 }; 40 41 struct gyro_3d_state { 42 struct hid_sensor_hub_callbacks callbacks; 43 struct hid_sensor_common common_attributes; 44 struct hid_sensor_hub_attribute_info gyro[GYRO_3D_CHANNEL_MAX]; 45 u32 gyro_val[GYRO_3D_CHANNEL_MAX]; 46 int scale_pre_decml; 47 int scale_post_decml; 48 int scale_precision; 49 int value_offset; 50 }; 51 52 static const u32 gyro_3d_addresses[GYRO_3D_CHANNEL_MAX] = { 53 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS, 54 HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS, 55 HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS 56 }; 57 58 /* Channel definitions */ 59 static const struct iio_chan_spec gyro_3d_channels[] = { 60 { 61 .type = IIO_ANGL_VEL, 62 .modified = 1, 63 .channel2 = IIO_MOD_X, 64 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 65 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 66 BIT(IIO_CHAN_INFO_SCALE) | 67 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 68 BIT(IIO_CHAN_INFO_HYSTERESIS), 69 .scan_index = CHANNEL_SCAN_INDEX_X, 70 }, { 71 .type = IIO_ANGL_VEL, 72 .modified = 1, 73 .channel2 = IIO_MOD_Y, 74 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 75 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 76 BIT(IIO_CHAN_INFO_SCALE) | 77 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 78 BIT(IIO_CHAN_INFO_HYSTERESIS), 79 .scan_index = CHANNEL_SCAN_INDEX_Y, 80 }, { 81 .type = IIO_ANGL_VEL, 82 .modified = 1, 83 .channel2 = IIO_MOD_Z, 84 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 85 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 86 BIT(IIO_CHAN_INFO_SCALE) | 87 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 88 BIT(IIO_CHAN_INFO_HYSTERESIS), 89 .scan_index = CHANNEL_SCAN_INDEX_Z, 90 } 91 }; 92 93 /* Adjust channel real bits based on report descriptor */ 94 static void gyro_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels, 95 int channel, int size) 96 { 97 channels[channel].scan_type.sign = 's'; 98 /* Real storage bits will change based on the report desc. */ 99 channels[channel].scan_type.realbits = size * 8; 100 /* Maximum size of a sample to capture is u32 */ 101 channels[channel].scan_type.storagebits = sizeof(u32) * 8; 102 } 103 104 /* Channel read_raw handler */ 105 static int gyro_3d_read_raw(struct iio_dev *indio_dev, 106 struct iio_chan_spec const *chan, 107 int *val, int *val2, 108 long mask) 109 { 110 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 111 int report_id = -1; 112 u32 address; 113 int ret_type; 114 s32 poll_value; 115 116 *val = 0; 117 *val2 = 0; 118 switch (mask) { 119 case 0: 120 poll_value = hid_sensor_read_poll_value( 121 &gyro_state->common_attributes); 122 if (poll_value < 0) 123 return -EINVAL; 124 125 hid_sensor_power_state(&gyro_state->common_attributes, true); 126 msleep_interruptible(poll_value * 2); 127 report_id = gyro_state->gyro[chan->scan_index].report_id; 128 address = gyro_3d_addresses[chan->scan_index]; 129 if (report_id >= 0) 130 *val = sensor_hub_input_attr_get_raw_value( 131 gyro_state->common_attributes.hsdev, 132 HID_USAGE_SENSOR_GYRO_3D, address, 133 report_id); 134 else { 135 *val = 0; 136 hid_sensor_power_state(&gyro_state->common_attributes, 137 false); 138 return -EINVAL; 139 } 140 hid_sensor_power_state(&gyro_state->common_attributes, false); 141 ret_type = IIO_VAL_INT; 142 break; 143 case IIO_CHAN_INFO_SCALE: 144 *val = gyro_state->scale_pre_decml; 145 *val2 = gyro_state->scale_post_decml; 146 ret_type = gyro_state->scale_precision; 147 break; 148 case IIO_CHAN_INFO_OFFSET: 149 *val = gyro_state->value_offset; 150 ret_type = IIO_VAL_INT; 151 break; 152 case IIO_CHAN_INFO_SAMP_FREQ: 153 ret_type = hid_sensor_read_samp_freq_value( 154 &gyro_state->common_attributes, val, val2); 155 break; 156 case IIO_CHAN_INFO_HYSTERESIS: 157 ret_type = hid_sensor_read_raw_hyst_value( 158 &gyro_state->common_attributes, val, val2); 159 break; 160 default: 161 ret_type = -EINVAL; 162 break; 163 } 164 165 return ret_type; 166 } 167 168 /* Channel write_raw handler */ 169 static int gyro_3d_write_raw(struct iio_dev *indio_dev, 170 struct iio_chan_spec const *chan, 171 int val, 172 int val2, 173 long mask) 174 { 175 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 176 int ret = 0; 177 178 switch (mask) { 179 case IIO_CHAN_INFO_SAMP_FREQ: 180 ret = hid_sensor_write_samp_freq_value( 181 &gyro_state->common_attributes, val, val2); 182 break; 183 case IIO_CHAN_INFO_HYSTERESIS: 184 ret = hid_sensor_write_raw_hyst_value( 185 &gyro_state->common_attributes, val, val2); 186 break; 187 default: 188 ret = -EINVAL; 189 } 190 191 return ret; 192 } 193 194 static const struct iio_info gyro_3d_info = { 195 .driver_module = THIS_MODULE, 196 .read_raw = &gyro_3d_read_raw, 197 .write_raw = &gyro_3d_write_raw, 198 }; 199 200 /* Function to push data to buffer */ 201 static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data, 202 int len) 203 { 204 dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); 205 iio_push_to_buffers(indio_dev, data); 206 } 207 208 /* Callback handler to send event after all samples are received and captured */ 209 static int gyro_3d_proc_event(struct hid_sensor_hub_device *hsdev, 210 unsigned usage_id, 211 void *priv) 212 { 213 struct iio_dev *indio_dev = platform_get_drvdata(priv); 214 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 215 216 dev_dbg(&indio_dev->dev, "gyro_3d_proc_event\n"); 217 if (atomic_read(&gyro_state->common_attributes.data_ready)) 218 hid_sensor_push_data(indio_dev, 219 gyro_state->gyro_val, 220 sizeof(gyro_state->gyro_val)); 221 222 return 0; 223 } 224 225 /* Capture samples in local storage */ 226 static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev, 227 unsigned usage_id, 228 size_t raw_len, char *raw_data, 229 void *priv) 230 { 231 struct iio_dev *indio_dev = platform_get_drvdata(priv); 232 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 233 int offset; 234 int ret = -EINVAL; 235 236 switch (usage_id) { 237 case HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS: 238 case HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS: 239 case HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS: 240 offset = usage_id - HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS; 241 gyro_state->gyro_val[CHANNEL_SCAN_INDEX_X + offset] = 242 *(u32 *)raw_data; 243 ret = 0; 244 break; 245 default: 246 break; 247 } 248 249 return ret; 250 } 251 252 /* Parse report which is specific to an usage id*/ 253 static int gyro_3d_parse_report(struct platform_device *pdev, 254 struct hid_sensor_hub_device *hsdev, 255 struct iio_chan_spec *channels, 256 unsigned usage_id, 257 struct gyro_3d_state *st) 258 { 259 int ret; 260 int i; 261 262 for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) { 263 ret = sensor_hub_input_get_attribute_info(hsdev, 264 HID_INPUT_REPORT, 265 usage_id, 266 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + i, 267 &st->gyro[CHANNEL_SCAN_INDEX_X + i]); 268 if (ret < 0) 269 break; 270 gyro_3d_adjust_channel_bit_mask(channels, 271 CHANNEL_SCAN_INDEX_X + i, 272 st->gyro[CHANNEL_SCAN_INDEX_X + i].size); 273 } 274 dev_dbg(&pdev->dev, "gyro_3d %x:%x, %x:%x, %x:%x\n", 275 st->gyro[0].index, 276 st->gyro[0].report_id, 277 st->gyro[1].index, st->gyro[1].report_id, 278 st->gyro[2].index, st->gyro[2].report_id); 279 280 st->scale_precision = hid_sensor_format_scale( 281 HID_USAGE_SENSOR_GYRO_3D, 282 &st->gyro[CHANNEL_SCAN_INDEX_X], 283 &st->scale_pre_decml, &st->scale_post_decml); 284 285 /* Set Sensitivity field ids, when there is no individual modifier */ 286 if (st->common_attributes.sensitivity.index < 0) { 287 sensor_hub_input_get_attribute_info(hsdev, 288 HID_FEATURE_REPORT, usage_id, 289 HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | 290 HID_USAGE_SENSOR_DATA_ANGL_VELOCITY, 291 &st->common_attributes.sensitivity); 292 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", 293 st->common_attributes.sensitivity.index, 294 st->common_attributes.sensitivity.report_id); 295 } 296 return ret; 297 } 298 299 /* Function to initialize the processing for usage id */ 300 static int hid_gyro_3d_probe(struct platform_device *pdev) 301 { 302 int ret = 0; 303 static const char *name = "gyro_3d"; 304 struct iio_dev *indio_dev; 305 struct gyro_3d_state *gyro_state; 306 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 307 struct iio_chan_spec *channels; 308 309 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*gyro_state)); 310 if (!indio_dev) 311 return -ENOMEM; 312 platform_set_drvdata(pdev, indio_dev); 313 314 gyro_state = iio_priv(indio_dev); 315 gyro_state->common_attributes.hsdev = hsdev; 316 gyro_state->common_attributes.pdev = pdev; 317 318 ret = hid_sensor_parse_common_attributes(hsdev, 319 HID_USAGE_SENSOR_GYRO_3D, 320 &gyro_state->common_attributes); 321 if (ret) { 322 dev_err(&pdev->dev, "failed to setup common attributes\n"); 323 return ret; 324 } 325 326 channels = kmemdup(gyro_3d_channels, sizeof(gyro_3d_channels), 327 GFP_KERNEL); 328 if (!channels) { 329 dev_err(&pdev->dev, "failed to duplicate channels\n"); 330 return -ENOMEM; 331 } 332 333 ret = gyro_3d_parse_report(pdev, hsdev, channels, 334 HID_USAGE_SENSOR_GYRO_3D, gyro_state); 335 if (ret) { 336 dev_err(&pdev->dev, "failed to setup attributes\n"); 337 goto error_free_dev_mem; 338 } 339 340 indio_dev->channels = channels; 341 indio_dev->num_channels = ARRAY_SIZE(gyro_3d_channels); 342 indio_dev->dev.parent = &pdev->dev; 343 indio_dev->info = &gyro_3d_info; 344 indio_dev->name = name; 345 indio_dev->modes = INDIO_DIRECT_MODE; 346 347 ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, 348 NULL, NULL); 349 if (ret) { 350 dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); 351 goto error_free_dev_mem; 352 } 353 atomic_set(&gyro_state->common_attributes.data_ready, 0); 354 ret = hid_sensor_setup_trigger(indio_dev, name, 355 &gyro_state->common_attributes); 356 if (ret < 0) { 357 dev_err(&pdev->dev, "trigger setup failed\n"); 358 goto error_unreg_buffer_funcs; 359 } 360 361 ret = iio_device_register(indio_dev); 362 if (ret) { 363 dev_err(&pdev->dev, "device register failed\n"); 364 goto error_remove_trigger; 365 } 366 367 gyro_state->callbacks.send_event = gyro_3d_proc_event; 368 gyro_state->callbacks.capture_sample = gyro_3d_capture_sample; 369 gyro_state->callbacks.pdev = pdev; 370 ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D, 371 &gyro_state->callbacks); 372 if (ret < 0) { 373 dev_err(&pdev->dev, "callback reg failed\n"); 374 goto error_iio_unreg; 375 } 376 377 return ret; 378 379 error_iio_unreg: 380 iio_device_unregister(indio_dev); 381 error_remove_trigger: 382 hid_sensor_remove_trigger(&gyro_state->common_attributes); 383 error_unreg_buffer_funcs: 384 iio_triggered_buffer_cleanup(indio_dev); 385 error_free_dev_mem: 386 kfree(indio_dev->channels); 387 return ret; 388 } 389 390 /* Function to deinitialize the processing for usage id */ 391 static int hid_gyro_3d_remove(struct platform_device *pdev) 392 { 393 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 394 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 395 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 396 397 sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D); 398 iio_device_unregister(indio_dev); 399 hid_sensor_remove_trigger(&gyro_state->common_attributes); 400 iio_triggered_buffer_cleanup(indio_dev); 401 kfree(indio_dev->channels); 402 403 return 0; 404 } 405 406 static struct platform_device_id hid_gyro_3d_ids[] = { 407 { 408 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ 409 .name = "HID-SENSOR-200076", 410 }, 411 { /* sentinel */ } 412 }; 413 MODULE_DEVICE_TABLE(platform, hid_gyro_3d_ids); 414 415 static struct platform_driver hid_gyro_3d_platform_driver = { 416 .id_table = hid_gyro_3d_ids, 417 .driver = { 418 .name = KBUILD_MODNAME, 419 .owner = THIS_MODULE, 420 }, 421 .probe = hid_gyro_3d_probe, 422 .remove = hid_gyro_3d_remove, 423 }; 424 module_platform_driver(hid_gyro_3d_platform_driver); 425 426 MODULE_DESCRIPTION("HID Sensor Gyroscope 3D"); 427 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>"); 428 MODULE_LICENSE("GPL"); 429