1 /* 2 * HID Sensors Driver 3 * Copyright (c) 2012, Intel Corporation. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms and conditions of the GNU General Public License, 7 * version 2, as published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program; if not, write to the Free Software Foundation, Inc., 16 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 17 * 18 */ 19 #include <linux/device.h> 20 #include <linux/platform_device.h> 21 #include <linux/module.h> 22 #include <linux/interrupt.h> 23 #include <linux/irq.h> 24 #include <linux/slab.h> 25 #include <linux/delay.h> 26 #include <linux/hid-sensor-hub.h> 27 #include <linux/iio/iio.h> 28 #include <linux/iio/sysfs.h> 29 #include <linux/iio/buffer.h> 30 #include <linux/iio/trigger_consumer.h> 31 #include <linux/iio/triggered_buffer.h> 32 #include "../common/hid-sensors/hid-sensor-trigger.h" 33 34 enum gyro_3d_channel { 35 CHANNEL_SCAN_INDEX_X, 36 CHANNEL_SCAN_INDEX_Y, 37 CHANNEL_SCAN_INDEX_Z, 38 GYRO_3D_CHANNEL_MAX, 39 }; 40 41 struct gyro_3d_state { 42 struct hid_sensor_hub_callbacks callbacks; 43 struct hid_sensor_common common_attributes; 44 struct hid_sensor_hub_attribute_info gyro[GYRO_3D_CHANNEL_MAX]; 45 u32 gyro_val[GYRO_3D_CHANNEL_MAX]; 46 int scale_pre_decml; 47 int scale_post_decml; 48 int scale_precision; 49 int value_offset; 50 }; 51 52 static const u32 gyro_3d_addresses[GYRO_3D_CHANNEL_MAX] = { 53 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS, 54 HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS, 55 HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS 56 }; 57 58 /* Channel definitions */ 59 static const struct iio_chan_spec gyro_3d_channels[] = { 60 { 61 .type = IIO_ANGL_VEL, 62 .modified = 1, 63 .channel2 = IIO_MOD_X, 64 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 65 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 66 BIT(IIO_CHAN_INFO_SCALE) | 67 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 68 BIT(IIO_CHAN_INFO_HYSTERESIS), 69 .scan_index = CHANNEL_SCAN_INDEX_X, 70 }, { 71 .type = IIO_ANGL_VEL, 72 .modified = 1, 73 .channel2 = IIO_MOD_Y, 74 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 75 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 76 BIT(IIO_CHAN_INFO_SCALE) | 77 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 78 BIT(IIO_CHAN_INFO_HYSTERESIS), 79 .scan_index = CHANNEL_SCAN_INDEX_Y, 80 }, { 81 .type = IIO_ANGL_VEL, 82 .modified = 1, 83 .channel2 = IIO_MOD_Z, 84 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 85 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 86 BIT(IIO_CHAN_INFO_SCALE) | 87 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 88 BIT(IIO_CHAN_INFO_HYSTERESIS), 89 .scan_index = CHANNEL_SCAN_INDEX_Z, 90 } 91 }; 92 93 /* Adjust channel real bits based on report descriptor */ 94 static void gyro_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels, 95 int channel, int size) 96 { 97 channels[channel].scan_type.sign = 's'; 98 /* Real storage bits will change based on the report desc. */ 99 channels[channel].scan_type.realbits = size * 8; 100 /* Maximum size of a sample to capture is u32 */ 101 channels[channel].scan_type.storagebits = sizeof(u32) * 8; 102 } 103 104 /* Channel read_raw handler */ 105 static int gyro_3d_read_raw(struct iio_dev *indio_dev, 106 struct iio_chan_spec const *chan, 107 int *val, int *val2, 108 long mask) 109 { 110 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 111 int report_id = -1; 112 u32 address; 113 int ret_type; 114 115 *val = 0; 116 *val2 = 0; 117 switch (mask) { 118 case IIO_CHAN_INFO_RAW: 119 hid_sensor_power_state(&gyro_state->common_attributes, true); 120 report_id = gyro_state->gyro[chan->scan_index].report_id; 121 address = gyro_3d_addresses[chan->scan_index]; 122 if (report_id >= 0) 123 *val = sensor_hub_input_attr_get_raw_value( 124 gyro_state->common_attributes.hsdev, 125 HID_USAGE_SENSOR_GYRO_3D, address, 126 report_id, 127 SENSOR_HUB_SYNC); 128 else { 129 *val = 0; 130 hid_sensor_power_state(&gyro_state->common_attributes, 131 false); 132 return -EINVAL; 133 } 134 hid_sensor_power_state(&gyro_state->common_attributes, false); 135 ret_type = IIO_VAL_INT; 136 break; 137 case IIO_CHAN_INFO_SCALE: 138 *val = gyro_state->scale_pre_decml; 139 *val2 = gyro_state->scale_post_decml; 140 ret_type = gyro_state->scale_precision; 141 break; 142 case IIO_CHAN_INFO_OFFSET: 143 *val = gyro_state->value_offset; 144 ret_type = IIO_VAL_INT; 145 break; 146 case IIO_CHAN_INFO_SAMP_FREQ: 147 ret_type = hid_sensor_read_samp_freq_value( 148 &gyro_state->common_attributes, val, val2); 149 break; 150 case IIO_CHAN_INFO_HYSTERESIS: 151 ret_type = hid_sensor_read_raw_hyst_value( 152 &gyro_state->common_attributes, val, val2); 153 break; 154 default: 155 ret_type = -EINVAL; 156 break; 157 } 158 159 return ret_type; 160 } 161 162 /* Channel write_raw handler */ 163 static int gyro_3d_write_raw(struct iio_dev *indio_dev, 164 struct iio_chan_spec const *chan, 165 int val, 166 int val2, 167 long mask) 168 { 169 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 170 int ret = 0; 171 172 switch (mask) { 173 case IIO_CHAN_INFO_SAMP_FREQ: 174 ret = hid_sensor_write_samp_freq_value( 175 &gyro_state->common_attributes, val, val2); 176 break; 177 case IIO_CHAN_INFO_HYSTERESIS: 178 ret = hid_sensor_write_raw_hyst_value( 179 &gyro_state->common_attributes, val, val2); 180 break; 181 default: 182 ret = -EINVAL; 183 } 184 185 return ret; 186 } 187 188 static const struct iio_info gyro_3d_info = { 189 .read_raw = &gyro_3d_read_raw, 190 .write_raw = &gyro_3d_write_raw, 191 }; 192 193 /* Function to push data to buffer */ 194 static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data, 195 int len) 196 { 197 dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); 198 iio_push_to_buffers(indio_dev, data); 199 } 200 201 /* Callback handler to send event after all samples are received and captured */ 202 static int gyro_3d_proc_event(struct hid_sensor_hub_device *hsdev, 203 unsigned usage_id, 204 void *priv) 205 { 206 struct iio_dev *indio_dev = platform_get_drvdata(priv); 207 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 208 209 dev_dbg(&indio_dev->dev, "gyro_3d_proc_event\n"); 210 if (atomic_read(&gyro_state->common_attributes.data_ready)) 211 hid_sensor_push_data(indio_dev, 212 gyro_state->gyro_val, 213 sizeof(gyro_state->gyro_val)); 214 215 return 0; 216 } 217 218 /* Capture samples in local storage */ 219 static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev, 220 unsigned usage_id, 221 size_t raw_len, char *raw_data, 222 void *priv) 223 { 224 struct iio_dev *indio_dev = platform_get_drvdata(priv); 225 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 226 int offset; 227 int ret = -EINVAL; 228 229 switch (usage_id) { 230 case HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS: 231 case HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS: 232 case HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS: 233 offset = usage_id - HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS; 234 gyro_state->gyro_val[CHANNEL_SCAN_INDEX_X + offset] = 235 *(u32 *)raw_data; 236 ret = 0; 237 break; 238 default: 239 break; 240 } 241 242 return ret; 243 } 244 245 /* Parse report which is specific to an usage id*/ 246 static int gyro_3d_parse_report(struct platform_device *pdev, 247 struct hid_sensor_hub_device *hsdev, 248 struct iio_chan_spec *channels, 249 unsigned usage_id, 250 struct gyro_3d_state *st) 251 { 252 int ret; 253 int i; 254 255 for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) { 256 ret = sensor_hub_input_get_attribute_info(hsdev, 257 HID_INPUT_REPORT, 258 usage_id, 259 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + i, 260 &st->gyro[CHANNEL_SCAN_INDEX_X + i]); 261 if (ret < 0) 262 break; 263 gyro_3d_adjust_channel_bit_mask(channels, 264 CHANNEL_SCAN_INDEX_X + i, 265 st->gyro[CHANNEL_SCAN_INDEX_X + i].size); 266 } 267 dev_dbg(&pdev->dev, "gyro_3d %x:%x, %x:%x, %x:%x\n", 268 st->gyro[0].index, 269 st->gyro[0].report_id, 270 st->gyro[1].index, st->gyro[1].report_id, 271 st->gyro[2].index, st->gyro[2].report_id); 272 273 st->scale_precision = hid_sensor_format_scale( 274 HID_USAGE_SENSOR_GYRO_3D, 275 &st->gyro[CHANNEL_SCAN_INDEX_X], 276 &st->scale_pre_decml, &st->scale_post_decml); 277 278 /* Set Sensitivity field ids, when there is no individual modifier */ 279 if (st->common_attributes.sensitivity.index < 0) { 280 sensor_hub_input_get_attribute_info(hsdev, 281 HID_FEATURE_REPORT, usage_id, 282 HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | 283 HID_USAGE_SENSOR_DATA_ANGL_VELOCITY, 284 &st->common_attributes.sensitivity); 285 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", 286 st->common_attributes.sensitivity.index, 287 st->common_attributes.sensitivity.report_id); 288 } 289 return ret; 290 } 291 292 /* Function to initialize the processing for usage id */ 293 static int hid_gyro_3d_probe(struct platform_device *pdev) 294 { 295 int ret = 0; 296 static const char *name = "gyro_3d"; 297 struct iio_dev *indio_dev; 298 struct gyro_3d_state *gyro_state; 299 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 300 301 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*gyro_state)); 302 if (!indio_dev) 303 return -ENOMEM; 304 platform_set_drvdata(pdev, indio_dev); 305 306 gyro_state = iio_priv(indio_dev); 307 gyro_state->common_attributes.hsdev = hsdev; 308 gyro_state->common_attributes.pdev = pdev; 309 310 ret = hid_sensor_parse_common_attributes(hsdev, 311 HID_USAGE_SENSOR_GYRO_3D, 312 &gyro_state->common_attributes); 313 if (ret) { 314 dev_err(&pdev->dev, "failed to setup common attributes\n"); 315 return ret; 316 } 317 318 indio_dev->channels = kmemdup(gyro_3d_channels, 319 sizeof(gyro_3d_channels), GFP_KERNEL); 320 if (!indio_dev->channels) { 321 dev_err(&pdev->dev, "failed to duplicate channels\n"); 322 return -ENOMEM; 323 } 324 325 ret = gyro_3d_parse_report(pdev, hsdev, 326 (struct iio_chan_spec *)indio_dev->channels, 327 HID_USAGE_SENSOR_GYRO_3D, gyro_state); 328 if (ret) { 329 dev_err(&pdev->dev, "failed to setup attributes\n"); 330 goto error_free_dev_mem; 331 } 332 333 indio_dev->num_channels = ARRAY_SIZE(gyro_3d_channels); 334 indio_dev->dev.parent = &pdev->dev; 335 indio_dev->info = &gyro_3d_info; 336 indio_dev->name = name; 337 indio_dev->modes = INDIO_DIRECT_MODE; 338 339 ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, 340 NULL, NULL); 341 if (ret) { 342 dev_err(&pdev->dev, "failed to initialize trigger buffer\n"); 343 goto error_free_dev_mem; 344 } 345 atomic_set(&gyro_state->common_attributes.data_ready, 0); 346 ret = hid_sensor_setup_trigger(indio_dev, name, 347 &gyro_state->common_attributes); 348 if (ret < 0) { 349 dev_err(&pdev->dev, "trigger setup failed\n"); 350 goto error_unreg_buffer_funcs; 351 } 352 353 ret = iio_device_register(indio_dev); 354 if (ret) { 355 dev_err(&pdev->dev, "device register failed\n"); 356 goto error_remove_trigger; 357 } 358 359 gyro_state->callbacks.send_event = gyro_3d_proc_event; 360 gyro_state->callbacks.capture_sample = gyro_3d_capture_sample; 361 gyro_state->callbacks.pdev = pdev; 362 ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D, 363 &gyro_state->callbacks); 364 if (ret < 0) { 365 dev_err(&pdev->dev, "callback reg failed\n"); 366 goto error_iio_unreg; 367 } 368 369 return ret; 370 371 error_iio_unreg: 372 iio_device_unregister(indio_dev); 373 error_remove_trigger: 374 hid_sensor_remove_trigger(&gyro_state->common_attributes); 375 error_unreg_buffer_funcs: 376 iio_triggered_buffer_cleanup(indio_dev); 377 error_free_dev_mem: 378 kfree(indio_dev->channels); 379 return ret; 380 } 381 382 /* Function to deinitialize the processing for usage id */ 383 static int hid_gyro_3d_remove(struct platform_device *pdev) 384 { 385 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 386 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 387 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 388 389 sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D); 390 iio_device_unregister(indio_dev); 391 hid_sensor_remove_trigger(&gyro_state->common_attributes); 392 iio_triggered_buffer_cleanup(indio_dev); 393 kfree(indio_dev->channels); 394 395 return 0; 396 } 397 398 static const struct platform_device_id hid_gyro_3d_ids[] = { 399 { 400 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ 401 .name = "HID-SENSOR-200076", 402 }, 403 { /* sentinel */ } 404 }; 405 MODULE_DEVICE_TABLE(platform, hid_gyro_3d_ids); 406 407 static struct platform_driver hid_gyro_3d_platform_driver = { 408 .id_table = hid_gyro_3d_ids, 409 .driver = { 410 .name = KBUILD_MODNAME, 411 .pm = &hid_sensor_pm_ops, 412 }, 413 .probe = hid_gyro_3d_probe, 414 .remove = hid_gyro_3d_remove, 415 }; 416 module_platform_driver(hid_gyro_3d_platform_driver); 417 418 MODULE_DESCRIPTION("HID Sensor Gyroscope 3D"); 419 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>"); 420 MODULE_LICENSE("GPL"); 421