1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * HID Sensors Driver 4 * Copyright (c) 2012, Intel Corporation. 5 */ 6 #include <linux/device.h> 7 #include <linux/platform_device.h> 8 #include <linux/module.h> 9 #include <linux/interrupt.h> 10 #include <linux/irq.h> 11 #include <linux/slab.h> 12 #include <linux/delay.h> 13 #include <linux/hid-sensor-hub.h> 14 #include <linux/iio/iio.h> 15 #include <linux/iio/sysfs.h> 16 #include <linux/iio/buffer.h> 17 #include "../common/hid-sensors/hid-sensor-trigger.h" 18 19 enum gyro_3d_channel { 20 CHANNEL_SCAN_INDEX_X, 21 CHANNEL_SCAN_INDEX_Y, 22 CHANNEL_SCAN_INDEX_Z, 23 GYRO_3D_CHANNEL_MAX, 24 }; 25 26 struct gyro_3d_state { 27 struct hid_sensor_hub_callbacks callbacks; 28 struct hid_sensor_common common_attributes; 29 struct hid_sensor_hub_attribute_info gyro[GYRO_3D_CHANNEL_MAX]; 30 u32 gyro_val[GYRO_3D_CHANNEL_MAX]; 31 int scale_pre_decml; 32 int scale_post_decml; 33 int scale_precision; 34 int value_offset; 35 }; 36 37 static const u32 gyro_3d_addresses[GYRO_3D_CHANNEL_MAX] = { 38 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS, 39 HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS, 40 HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS 41 }; 42 43 /* Channel definitions */ 44 static const struct iio_chan_spec gyro_3d_channels[] = { 45 { 46 .type = IIO_ANGL_VEL, 47 .modified = 1, 48 .channel2 = IIO_MOD_X, 49 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 50 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 51 BIT(IIO_CHAN_INFO_SCALE) | 52 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 53 BIT(IIO_CHAN_INFO_HYSTERESIS), 54 .scan_index = CHANNEL_SCAN_INDEX_X, 55 }, { 56 .type = IIO_ANGL_VEL, 57 .modified = 1, 58 .channel2 = IIO_MOD_Y, 59 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 60 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 61 BIT(IIO_CHAN_INFO_SCALE) | 62 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 63 BIT(IIO_CHAN_INFO_HYSTERESIS), 64 .scan_index = CHANNEL_SCAN_INDEX_Y, 65 }, { 66 .type = IIO_ANGL_VEL, 67 .modified = 1, 68 .channel2 = IIO_MOD_Z, 69 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), 70 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | 71 BIT(IIO_CHAN_INFO_SCALE) | 72 BIT(IIO_CHAN_INFO_SAMP_FREQ) | 73 BIT(IIO_CHAN_INFO_HYSTERESIS), 74 .scan_index = CHANNEL_SCAN_INDEX_Z, 75 } 76 }; 77 78 /* Adjust channel real bits based on report descriptor */ 79 static void gyro_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels, 80 int channel, int size) 81 { 82 channels[channel].scan_type.sign = 's'; 83 /* Real storage bits will change based on the report desc. */ 84 channels[channel].scan_type.realbits = size * 8; 85 /* Maximum size of a sample to capture is u32 */ 86 channels[channel].scan_type.storagebits = sizeof(u32) * 8; 87 } 88 89 /* Channel read_raw handler */ 90 static int gyro_3d_read_raw(struct iio_dev *indio_dev, 91 struct iio_chan_spec const *chan, 92 int *val, int *val2, 93 long mask) 94 { 95 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 96 int report_id = -1; 97 u32 address; 98 int ret_type; 99 s32 min; 100 101 *val = 0; 102 *val2 = 0; 103 switch (mask) { 104 case IIO_CHAN_INFO_RAW: 105 hid_sensor_power_state(&gyro_state->common_attributes, true); 106 report_id = gyro_state->gyro[chan->scan_index].report_id; 107 min = gyro_state->gyro[chan->scan_index].logical_minimum; 108 address = gyro_3d_addresses[chan->scan_index]; 109 if (report_id >= 0) 110 *val = sensor_hub_input_attr_get_raw_value( 111 gyro_state->common_attributes.hsdev, 112 HID_USAGE_SENSOR_GYRO_3D, address, 113 report_id, 114 SENSOR_HUB_SYNC, 115 min < 0); 116 else { 117 *val = 0; 118 hid_sensor_power_state(&gyro_state->common_attributes, 119 false); 120 return -EINVAL; 121 } 122 hid_sensor_power_state(&gyro_state->common_attributes, false); 123 ret_type = IIO_VAL_INT; 124 break; 125 case IIO_CHAN_INFO_SCALE: 126 *val = gyro_state->scale_pre_decml; 127 *val2 = gyro_state->scale_post_decml; 128 ret_type = gyro_state->scale_precision; 129 break; 130 case IIO_CHAN_INFO_OFFSET: 131 *val = gyro_state->value_offset; 132 ret_type = IIO_VAL_INT; 133 break; 134 case IIO_CHAN_INFO_SAMP_FREQ: 135 ret_type = hid_sensor_read_samp_freq_value( 136 &gyro_state->common_attributes, val, val2); 137 break; 138 case IIO_CHAN_INFO_HYSTERESIS: 139 ret_type = hid_sensor_read_raw_hyst_value( 140 &gyro_state->common_attributes, val, val2); 141 break; 142 default: 143 ret_type = -EINVAL; 144 break; 145 } 146 147 return ret_type; 148 } 149 150 /* Channel write_raw handler */ 151 static int gyro_3d_write_raw(struct iio_dev *indio_dev, 152 struct iio_chan_spec const *chan, 153 int val, 154 int val2, 155 long mask) 156 { 157 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 158 int ret = 0; 159 160 switch (mask) { 161 case IIO_CHAN_INFO_SAMP_FREQ: 162 ret = hid_sensor_write_samp_freq_value( 163 &gyro_state->common_attributes, val, val2); 164 break; 165 case IIO_CHAN_INFO_HYSTERESIS: 166 ret = hid_sensor_write_raw_hyst_value( 167 &gyro_state->common_attributes, val, val2); 168 break; 169 default: 170 ret = -EINVAL; 171 } 172 173 return ret; 174 } 175 176 static const struct iio_info gyro_3d_info = { 177 .read_raw = &gyro_3d_read_raw, 178 .write_raw = &gyro_3d_write_raw, 179 }; 180 181 /* Function to push data to buffer */ 182 static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data, 183 int len) 184 { 185 dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); 186 iio_push_to_buffers(indio_dev, data); 187 } 188 189 /* Callback handler to send event after all samples are received and captured */ 190 static int gyro_3d_proc_event(struct hid_sensor_hub_device *hsdev, 191 unsigned usage_id, 192 void *priv) 193 { 194 struct iio_dev *indio_dev = platform_get_drvdata(priv); 195 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 196 197 dev_dbg(&indio_dev->dev, "gyro_3d_proc_event\n"); 198 if (atomic_read(&gyro_state->common_attributes.data_ready)) 199 hid_sensor_push_data(indio_dev, 200 gyro_state->gyro_val, 201 sizeof(gyro_state->gyro_val)); 202 203 return 0; 204 } 205 206 /* Capture samples in local storage */ 207 static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev, 208 unsigned usage_id, 209 size_t raw_len, char *raw_data, 210 void *priv) 211 { 212 struct iio_dev *indio_dev = platform_get_drvdata(priv); 213 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 214 int offset; 215 int ret = -EINVAL; 216 217 switch (usage_id) { 218 case HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS: 219 case HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS: 220 case HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS: 221 offset = usage_id - HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS; 222 gyro_state->gyro_val[CHANNEL_SCAN_INDEX_X + offset] = 223 *(u32 *)raw_data; 224 ret = 0; 225 break; 226 default: 227 break; 228 } 229 230 return ret; 231 } 232 233 /* Parse report which is specific to an usage id*/ 234 static int gyro_3d_parse_report(struct platform_device *pdev, 235 struct hid_sensor_hub_device *hsdev, 236 struct iio_chan_spec *channels, 237 unsigned usage_id, 238 struct gyro_3d_state *st) 239 { 240 int ret; 241 int i; 242 243 for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) { 244 ret = sensor_hub_input_get_attribute_info(hsdev, 245 HID_INPUT_REPORT, 246 usage_id, 247 HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + i, 248 &st->gyro[CHANNEL_SCAN_INDEX_X + i]); 249 if (ret < 0) 250 break; 251 gyro_3d_adjust_channel_bit_mask(channels, 252 CHANNEL_SCAN_INDEX_X + i, 253 st->gyro[CHANNEL_SCAN_INDEX_X + i].size); 254 } 255 dev_dbg(&pdev->dev, "gyro_3d %x:%x, %x:%x, %x:%x\n", 256 st->gyro[0].index, 257 st->gyro[0].report_id, 258 st->gyro[1].index, st->gyro[1].report_id, 259 st->gyro[2].index, st->gyro[2].report_id); 260 261 st->scale_precision = hid_sensor_format_scale( 262 HID_USAGE_SENSOR_GYRO_3D, 263 &st->gyro[CHANNEL_SCAN_INDEX_X], 264 &st->scale_pre_decml, &st->scale_post_decml); 265 266 /* Set Sensitivity field ids, when there is no individual modifier */ 267 if (st->common_attributes.sensitivity.index < 0) { 268 sensor_hub_input_get_attribute_info(hsdev, 269 HID_FEATURE_REPORT, usage_id, 270 HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS | 271 HID_USAGE_SENSOR_DATA_ANGL_VELOCITY, 272 &st->common_attributes.sensitivity); 273 dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n", 274 st->common_attributes.sensitivity.index, 275 st->common_attributes.sensitivity.report_id); 276 } 277 return ret; 278 } 279 280 /* Function to initialize the processing for usage id */ 281 static int hid_gyro_3d_probe(struct platform_device *pdev) 282 { 283 int ret = 0; 284 static const char *name = "gyro_3d"; 285 struct iio_dev *indio_dev; 286 struct gyro_3d_state *gyro_state; 287 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 288 289 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*gyro_state)); 290 if (!indio_dev) 291 return -ENOMEM; 292 platform_set_drvdata(pdev, indio_dev); 293 294 gyro_state = iio_priv(indio_dev); 295 gyro_state->common_attributes.hsdev = hsdev; 296 gyro_state->common_attributes.pdev = pdev; 297 298 ret = hid_sensor_parse_common_attributes(hsdev, 299 HID_USAGE_SENSOR_GYRO_3D, 300 &gyro_state->common_attributes); 301 if (ret) { 302 dev_err(&pdev->dev, "failed to setup common attributes\n"); 303 return ret; 304 } 305 306 indio_dev->channels = kmemdup(gyro_3d_channels, 307 sizeof(gyro_3d_channels), GFP_KERNEL); 308 if (!indio_dev->channels) { 309 dev_err(&pdev->dev, "failed to duplicate channels\n"); 310 return -ENOMEM; 311 } 312 313 ret = gyro_3d_parse_report(pdev, hsdev, 314 (struct iio_chan_spec *)indio_dev->channels, 315 HID_USAGE_SENSOR_GYRO_3D, gyro_state); 316 if (ret) { 317 dev_err(&pdev->dev, "failed to setup attributes\n"); 318 goto error_free_dev_mem; 319 } 320 321 indio_dev->num_channels = ARRAY_SIZE(gyro_3d_channels); 322 indio_dev->info = &gyro_3d_info; 323 indio_dev->name = name; 324 indio_dev->modes = INDIO_DIRECT_MODE; 325 326 atomic_set(&gyro_state->common_attributes.data_ready, 0); 327 328 ret = hid_sensor_setup_trigger(indio_dev, name, 329 &gyro_state->common_attributes); 330 if (ret < 0) { 331 dev_err(&pdev->dev, "trigger setup failed\n"); 332 goto error_free_dev_mem; 333 } 334 335 ret = iio_device_register(indio_dev); 336 if (ret) { 337 dev_err(&pdev->dev, "device register failed\n"); 338 goto error_remove_trigger; 339 } 340 341 gyro_state->callbacks.send_event = gyro_3d_proc_event; 342 gyro_state->callbacks.capture_sample = gyro_3d_capture_sample; 343 gyro_state->callbacks.pdev = pdev; 344 ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D, 345 &gyro_state->callbacks); 346 if (ret < 0) { 347 dev_err(&pdev->dev, "callback reg failed\n"); 348 goto error_iio_unreg; 349 } 350 351 return ret; 352 353 error_iio_unreg: 354 iio_device_unregister(indio_dev); 355 error_remove_trigger: 356 hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes); 357 error_free_dev_mem: 358 kfree(indio_dev->channels); 359 return ret; 360 } 361 362 /* Function to deinitialize the processing for usage id */ 363 static int hid_gyro_3d_remove(struct platform_device *pdev) 364 { 365 struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data; 366 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 367 struct gyro_3d_state *gyro_state = iio_priv(indio_dev); 368 369 sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D); 370 iio_device_unregister(indio_dev); 371 hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes); 372 kfree(indio_dev->channels); 373 374 return 0; 375 } 376 377 static const struct platform_device_id hid_gyro_3d_ids[] = { 378 { 379 /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ 380 .name = "HID-SENSOR-200076", 381 }, 382 { /* sentinel */ } 383 }; 384 MODULE_DEVICE_TABLE(platform, hid_gyro_3d_ids); 385 386 static struct platform_driver hid_gyro_3d_platform_driver = { 387 .id_table = hid_gyro_3d_ids, 388 .driver = { 389 .name = KBUILD_MODNAME, 390 .pm = &hid_sensor_pm_ops, 391 }, 392 .probe = hid_gyro_3d_probe, 393 .remove = hid_gyro_3d_remove, 394 }; 395 module_platform_driver(hid_gyro_3d_platform_driver); 396 397 MODULE_DESCRIPTION("HID Sensor Gyroscope 3D"); 398 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>"); 399 MODULE_LICENSE("GPL"); 400