1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * AD9523 SPI Low Jitter Clock Generator 4 * 5 * Copyright 2012 Analog Devices Inc. 6 */ 7 8 #include <linux/device.h> 9 #include <linux/kernel.h> 10 #include <linux/slab.h> 11 #include <linux/sysfs.h> 12 #include <linux/spi/spi.h> 13 #include <linux/regulator/consumer.h> 14 #include <linux/gpio/consumer.h> 15 #include <linux/err.h> 16 #include <linux/module.h> 17 #include <linux/delay.h> 18 19 #include <linux/iio/iio.h> 20 #include <linux/iio/sysfs.h> 21 #include <linux/iio/frequency/ad9523.h> 22 23 #define AD9523_READ (1 << 15) 24 #define AD9523_WRITE (0 << 15) 25 #define AD9523_CNT(x) (((x) - 1) << 13) 26 #define AD9523_ADDR(x) ((x) & 0xFFF) 27 28 #define AD9523_R1B (1 << 16) 29 #define AD9523_R2B (2 << 16) 30 #define AD9523_R3B (3 << 16) 31 #define AD9523_TRANSF_LEN(x) ((x) >> 16) 32 33 #define AD9523_SERIAL_PORT_CONFIG (AD9523_R1B | 0x0) 34 #define AD9523_VERSION_REGISTER (AD9523_R1B | 0x2) 35 #define AD9523_PART_REGISTER (AD9523_R1B | 0x3) 36 #define AD9523_READBACK_CTRL (AD9523_R1B | 0x4) 37 38 #define AD9523_EEPROM_CUSTOMER_VERSION_ID (AD9523_R2B | 0x6) 39 40 #define AD9523_PLL1_REF_A_DIVIDER (AD9523_R2B | 0x11) 41 #define AD9523_PLL1_REF_B_DIVIDER (AD9523_R2B | 0x13) 42 #define AD9523_PLL1_REF_TEST_DIVIDER (AD9523_R1B | 0x14) 43 #define AD9523_PLL1_FEEDBACK_DIVIDER (AD9523_R2B | 0x17) 44 #define AD9523_PLL1_CHARGE_PUMP_CTRL (AD9523_R2B | 0x19) 45 #define AD9523_PLL1_INPUT_RECEIVERS_CTRL (AD9523_R1B | 0x1A) 46 #define AD9523_PLL1_REF_CTRL (AD9523_R1B | 0x1B) 47 #define AD9523_PLL1_MISC_CTRL (AD9523_R1B | 0x1C) 48 #define AD9523_PLL1_LOOP_FILTER_CTRL (AD9523_R1B | 0x1D) 49 50 #define AD9523_PLL2_CHARGE_PUMP (AD9523_R1B | 0xF0) 51 #define AD9523_PLL2_FEEDBACK_DIVIDER_AB (AD9523_R1B | 0xF1) 52 #define AD9523_PLL2_CTRL (AD9523_R1B | 0xF2) 53 #define AD9523_PLL2_VCO_CTRL (AD9523_R1B | 0xF3) 54 #define AD9523_PLL2_VCO_DIVIDER (AD9523_R1B | 0xF4) 55 #define AD9523_PLL2_LOOP_FILTER_CTRL (AD9523_R2B | 0xF6) 56 #define AD9523_PLL2_R2_DIVIDER (AD9523_R1B | 0xF7) 57 58 #define AD9523_CHANNEL_CLOCK_DIST(ch) (AD9523_R3B | (0x192 + 3 * ch)) 59 60 #define AD9523_PLL1_OUTPUT_CTRL (AD9523_R1B | 0x1BA) 61 #define AD9523_PLL1_OUTPUT_CHANNEL_CTRL (AD9523_R1B | 0x1BB) 62 63 #define AD9523_READBACK_0 (AD9523_R1B | 0x22C) 64 #define AD9523_READBACK_1 (AD9523_R1B | 0x22D) 65 66 #define AD9523_STATUS_SIGNALS (AD9523_R3B | 0x232) 67 #define AD9523_POWER_DOWN_CTRL (AD9523_R1B | 0x233) 68 #define AD9523_IO_UPDATE (AD9523_R1B | 0x234) 69 70 #define AD9523_EEPROM_DATA_XFER_STATUS (AD9523_R1B | 0xB00) 71 #define AD9523_EEPROM_ERROR_READBACK (AD9523_R1B | 0xB01) 72 #define AD9523_EEPROM_CTRL1 (AD9523_R1B | 0xB02) 73 #define AD9523_EEPROM_CTRL2 (AD9523_R1B | 0xB03) 74 75 /* AD9523_SERIAL_PORT_CONFIG */ 76 77 #define AD9523_SER_CONF_SDO_ACTIVE (1 << 7) 78 #define AD9523_SER_CONF_SOFT_RESET (1 << 5) 79 80 /* AD9523_READBACK_CTRL */ 81 #define AD9523_READBACK_CTRL_READ_BUFFERED (1 << 0) 82 83 /* AD9523_PLL1_CHARGE_PUMP_CTRL */ 84 #define AD9523_PLL1_CHARGE_PUMP_CURRENT_nA(x) (((x) / 500) & 0x7F) 85 #define AD9523_PLL1_CHARGE_PUMP_TRISTATE (1 << 7) 86 #define AD9523_PLL1_CHARGE_PUMP_MODE_NORMAL (3 << 8) 87 #define AD9523_PLL1_CHARGE_PUMP_MODE_PUMP_DOWN (2 << 8) 88 #define AD9523_PLL1_CHARGE_PUMP_MODE_PUMP_UP (1 << 8) 89 #define AD9523_PLL1_CHARGE_PUMP_MODE_TRISTATE (0 << 8) 90 #define AD9523_PLL1_BACKLASH_PW_MIN (0 << 10) 91 #define AD9523_PLL1_BACKLASH_PW_LOW (1 << 10) 92 #define AD9523_PLL1_BACKLASH_PW_HIGH (2 << 10) 93 #define AD9523_PLL1_BACKLASH_PW_MAX (3 << 10) 94 95 /* AD9523_PLL1_INPUT_RECEIVERS_CTRL */ 96 #define AD9523_PLL1_REF_TEST_RCV_EN (1 << 7) 97 #define AD9523_PLL1_REFB_DIFF_RCV_EN (1 << 6) 98 #define AD9523_PLL1_REFA_DIFF_RCV_EN (1 << 5) 99 #define AD9523_PLL1_REFB_RCV_EN (1 << 4) 100 #define AD9523_PLL1_REFA_RCV_EN (1 << 3) 101 #define AD9523_PLL1_REFA_REFB_PWR_CTRL_EN (1 << 2) 102 #define AD9523_PLL1_OSC_IN_CMOS_NEG_INP_EN (1 << 1) 103 #define AD9523_PLL1_OSC_IN_DIFF_EN (1 << 0) 104 105 /* AD9523_PLL1_REF_CTRL */ 106 #define AD9523_PLL1_BYPASS_REF_TEST_DIV_EN (1 << 7) 107 #define AD9523_PLL1_BYPASS_FEEDBACK_DIV_EN (1 << 6) 108 #define AD9523_PLL1_ZERO_DELAY_MODE_INT (1 << 5) 109 #define AD9523_PLL1_ZERO_DELAY_MODE_EXT (0 << 5) 110 #define AD9523_PLL1_OSC_IN_PLL_FEEDBACK_EN (1 << 4) 111 #define AD9523_PLL1_ZD_IN_CMOS_NEG_INP_EN (1 << 3) 112 #define AD9523_PLL1_ZD_IN_DIFF_EN (1 << 2) 113 #define AD9523_PLL1_REFB_CMOS_NEG_INP_EN (1 << 1) 114 #define AD9523_PLL1_REFA_CMOS_NEG_INP_EN (1 << 0) 115 116 /* AD9523_PLL1_MISC_CTRL */ 117 #define AD9523_PLL1_REFB_INDEP_DIV_CTRL_EN (1 << 7) 118 #define AD9523_PLL1_OSC_CTRL_FAIL_VCC_BY2_EN (1 << 6) 119 #define AD9523_PLL1_REF_MODE(x) ((x) << 2) 120 #define AD9523_PLL1_BYPASS_REFB_DIV (1 << 1) 121 #define AD9523_PLL1_BYPASS_REFA_DIV (1 << 0) 122 123 /* AD9523_PLL1_LOOP_FILTER_CTRL */ 124 #define AD9523_PLL1_LOOP_FILTER_RZERO(x) ((x) & 0xF) 125 126 /* AD9523_PLL2_CHARGE_PUMP */ 127 #define AD9523_PLL2_CHARGE_PUMP_CURRENT_nA(x) ((x) / 3500) 128 129 /* AD9523_PLL2_FEEDBACK_DIVIDER_AB */ 130 #define AD9523_PLL2_FB_NDIV_A_CNT(x) (((x) & 0x3) << 6) 131 #define AD9523_PLL2_FB_NDIV_B_CNT(x) (((x) & 0x3F) << 0) 132 #define AD9523_PLL2_FB_NDIV(a, b) (4 * (b) + (a)) 133 134 /* AD9523_PLL2_CTRL */ 135 #define AD9523_PLL2_CHARGE_PUMP_MODE_NORMAL (3 << 0) 136 #define AD9523_PLL2_CHARGE_PUMP_MODE_PUMP_DOWN (2 << 0) 137 #define AD9523_PLL2_CHARGE_PUMP_MODE_PUMP_UP (1 << 0) 138 #define AD9523_PLL2_CHARGE_PUMP_MODE_TRISTATE (0 << 0) 139 #define AD9523_PLL2_BACKLASH_PW_MIN (0 << 2) 140 #define AD9523_PLL2_BACKLASH_PW_LOW (1 << 2) 141 #define AD9523_PLL2_BACKLASH_PW_HIGH (2 << 2) 142 #define AD9523_PLL2_BACKLASH_PW_MAX (3 << 1) 143 #define AD9523_PLL2_BACKLASH_CTRL_EN (1 << 4) 144 #define AD9523_PLL2_FREQ_DOUBLER_EN (1 << 5) 145 #define AD9523_PLL2_LOCK_DETECT_PWR_DOWN_EN (1 << 7) 146 147 /* AD9523_PLL2_VCO_CTRL */ 148 #define AD9523_PLL2_VCO_CALIBRATE (1 << 1) 149 #define AD9523_PLL2_FORCE_VCO_MIDSCALE (1 << 2) 150 #define AD9523_PLL2_FORCE_REFERENCE_VALID (1 << 3) 151 #define AD9523_PLL2_FORCE_RELEASE_SYNC (1 << 4) 152 153 /* AD9523_PLL2_VCO_DIVIDER */ 154 #define AD9523_PLL2_VCO_DIV_M1(x) ((((x) - 3) & 0x3) << 0) 155 #define AD9523_PLL2_VCO_DIV_M2(x) ((((x) - 3) & 0x3) << 4) 156 #define AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN (1 << 2) 157 #define AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN (1 << 6) 158 159 /* AD9523_PLL2_LOOP_FILTER_CTRL */ 160 #define AD9523_PLL2_LOOP_FILTER_CPOLE1(x) (((x) & 0x7) << 0) 161 #define AD9523_PLL2_LOOP_FILTER_RZERO(x) (((x) & 0x7) << 3) 162 #define AD9523_PLL2_LOOP_FILTER_RPOLE2(x) (((x) & 0x7) << 6) 163 #define AD9523_PLL2_LOOP_FILTER_RZERO_BYPASS_EN (1 << 8) 164 165 /* AD9523_PLL2_R2_DIVIDER */ 166 #define AD9523_PLL2_R2_DIVIDER_VAL(x) (((x) & 0x1F) << 0) 167 168 /* AD9523_CHANNEL_CLOCK_DIST */ 169 #define AD9523_CLK_DIST_DIV_PHASE(x) (((x) & 0x3F) << 18) 170 #define AD9523_CLK_DIST_DIV_PHASE_REV(x) ((ret >> 18) & 0x3F) 171 #define AD9523_CLK_DIST_DIV(x) ((((x) - 1) & 0x3FF) << 8) 172 #define AD9523_CLK_DIST_DIV_REV(x) (((ret >> 8) & 0x3FF) + 1) 173 #define AD9523_CLK_DIST_INV_DIV_OUTPUT_EN (1 << 7) 174 #define AD9523_CLK_DIST_IGNORE_SYNC_EN (1 << 6) 175 #define AD9523_CLK_DIST_PWR_DOWN_EN (1 << 5) 176 #define AD9523_CLK_DIST_LOW_PWR_MODE_EN (1 << 4) 177 #define AD9523_CLK_DIST_DRIVER_MODE(x) (((x) & 0xF) << 0) 178 179 /* AD9523_PLL1_OUTPUT_CTRL */ 180 #define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH6_M2 (1 << 7) 181 #define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH5_M2 (1 << 6) 182 #define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH4_M2 (1 << 5) 183 #define AD9523_PLL1_OUTP_CTRL_CMOS_DRV_WEAK (1 << 4) 184 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_1 (0 << 0) 185 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_2 (1 << 0) 186 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_4 (2 << 0) 187 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_8 (4 << 0) 188 #define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_16 (8 << 0) 189 190 /* AD9523_PLL1_OUTPUT_CHANNEL_CTRL */ 191 #define AD9523_PLL1_OUTP_CH_CTRL_OUTPUT_PWR_DOWN_EN (1 << 7) 192 #define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH9_M2 (1 << 6) 193 #define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH8_M2 (1 << 5) 194 #define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH7_M2 (1 << 4) 195 #define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH3 (1 << 3) 196 #define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH2 (1 << 2) 197 #define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH1 (1 << 1) 198 #define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH0 (1 << 0) 199 200 /* AD9523_READBACK_0 */ 201 #define AD9523_READBACK_0_STAT_PLL2_REF_CLK (1 << 7) 202 #define AD9523_READBACK_0_STAT_PLL2_FB_CLK (1 << 6) 203 #define AD9523_READBACK_0_STAT_VCXO (1 << 5) 204 #define AD9523_READBACK_0_STAT_REF_TEST (1 << 4) 205 #define AD9523_READBACK_0_STAT_REFB (1 << 3) 206 #define AD9523_READBACK_0_STAT_REFA (1 << 2) 207 #define AD9523_READBACK_0_STAT_PLL2_LD (1 << 1) 208 #define AD9523_READBACK_0_STAT_PLL1_LD (1 << 0) 209 210 /* AD9523_READBACK_1 */ 211 #define AD9523_READBACK_1_HOLDOVER_ACTIVE (1 << 3) 212 #define AD9523_READBACK_1_AUTOMODE_SEL_REFB (1 << 2) 213 #define AD9523_READBACK_1_VCO_CALIB_IN_PROGRESS (1 << 0) 214 215 /* AD9523_STATUS_SIGNALS */ 216 #define AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL (1 << 16) 217 #define AD9523_STATUS_MONITOR_01_PLL12_LOCKED (0x302) 218 /* AD9523_POWER_DOWN_CTRL */ 219 #define AD9523_POWER_DOWN_CTRL_PLL1_PWR_DOWN (1 << 2) 220 #define AD9523_POWER_DOWN_CTRL_PLL2_PWR_DOWN (1 << 1) 221 #define AD9523_POWER_DOWN_CTRL_DIST_PWR_DOWN (1 << 0) 222 223 /* AD9523_IO_UPDATE */ 224 #define AD9523_IO_UPDATE_EN (1 << 0) 225 226 /* AD9523_EEPROM_DATA_XFER_STATUS */ 227 #define AD9523_EEPROM_DATA_XFER_IN_PROGRESS (1 << 0) 228 229 /* AD9523_EEPROM_ERROR_READBACK */ 230 #define AD9523_EEPROM_ERROR_READBACK_FAIL (1 << 0) 231 232 /* AD9523_EEPROM_CTRL1 */ 233 #define AD9523_EEPROM_CTRL1_SOFT_EEPROM (1 << 1) 234 #define AD9523_EEPROM_CTRL1_EEPROM_WRITE_PROT_DIS (1 << 0) 235 236 /* AD9523_EEPROM_CTRL2 */ 237 #define AD9523_EEPROM_CTRL2_REG2EEPROM (1 << 0) 238 239 #define AD9523_NUM_CHAN 14 240 #define AD9523_NUM_CHAN_ALT_CLK_SRC 10 241 242 /* Helpers to avoid excess line breaks */ 243 #define AD_IFE(_pde, _a, _b) ((pdata->_pde) ? _a : _b) 244 #define AD_IF(_pde, _a) AD_IFE(_pde, _a, 0) 245 246 enum { 247 AD9523_STAT_PLL1_LD, 248 AD9523_STAT_PLL2_LD, 249 AD9523_STAT_REFA, 250 AD9523_STAT_REFB, 251 AD9523_STAT_REF_TEST, 252 AD9523_STAT_VCXO, 253 AD9523_STAT_PLL2_FB_CLK, 254 AD9523_STAT_PLL2_REF_CLK, 255 AD9523_SYNC, 256 AD9523_EEPROM, 257 }; 258 259 enum { 260 AD9523_VCO1, 261 AD9523_VCO2, 262 AD9523_VCXO, 263 AD9523_NUM_CLK_SRC, 264 }; 265 266 struct ad9523_state { 267 struct spi_device *spi; 268 struct regulator *reg; 269 struct ad9523_platform_data *pdata; 270 struct iio_chan_spec ad9523_channels[AD9523_NUM_CHAN]; 271 struct gpio_desc *pwrdown_gpio; 272 struct gpio_desc *reset_gpio; 273 struct gpio_desc *sync_gpio; 274 275 unsigned long vcxo_freq; 276 unsigned long vco_freq; 277 unsigned long vco_out_freq[AD9523_NUM_CLK_SRC]; 278 unsigned char vco_out_map[AD9523_NUM_CHAN_ALT_CLK_SRC]; 279 280 /* 281 * Lock for accessing device registers. Some operations require 282 * multiple consecutive R/W operations, during which the device 283 * shouldn't be interrupted. The buffers are also shared across 284 * all operations so need to be protected on stand alone reads and 285 * writes. 286 */ 287 struct mutex lock; 288 289 /* 290 * DMA (thus cache coherency maintenance) requires the 291 * transfer buffers to live in their own cache lines. 292 */ 293 union { 294 __be32 d32; 295 u8 d8[4]; 296 } data[2] ____cacheline_aligned; 297 }; 298 299 static int ad9523_read(struct iio_dev *indio_dev, unsigned int addr) 300 { 301 struct ad9523_state *st = iio_priv(indio_dev); 302 int ret; 303 304 /* We encode the register size 1..3 bytes into the register address. 305 * On transfer we get the size from the register datum, and make sure 306 * the result is properly aligned. 307 */ 308 309 struct spi_transfer t[] = { 310 { 311 .tx_buf = &st->data[0].d8[2], 312 .len = 2, 313 }, { 314 .rx_buf = &st->data[1].d8[4 - AD9523_TRANSF_LEN(addr)], 315 .len = AD9523_TRANSF_LEN(addr), 316 }, 317 }; 318 319 st->data[0].d32 = cpu_to_be32(AD9523_READ | 320 AD9523_CNT(AD9523_TRANSF_LEN(addr)) | 321 AD9523_ADDR(addr)); 322 323 ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t)); 324 if (ret < 0) 325 dev_err(&indio_dev->dev, "read failed (%d)", ret); 326 else 327 ret = be32_to_cpu(st->data[1].d32) & (0xFFFFFF >> 328 (8 * (3 - AD9523_TRANSF_LEN(addr)))); 329 330 return ret; 331 }; 332 333 static int ad9523_write(struct iio_dev *indio_dev, 334 unsigned int addr, unsigned int val) 335 { 336 struct ad9523_state *st = iio_priv(indio_dev); 337 int ret; 338 struct spi_transfer t[] = { 339 { 340 .tx_buf = &st->data[0].d8[2], 341 .len = 2, 342 }, { 343 .tx_buf = &st->data[1].d8[4 - AD9523_TRANSF_LEN(addr)], 344 .len = AD9523_TRANSF_LEN(addr), 345 }, 346 }; 347 348 st->data[0].d32 = cpu_to_be32(AD9523_WRITE | 349 AD9523_CNT(AD9523_TRANSF_LEN(addr)) | 350 AD9523_ADDR(addr)); 351 st->data[1].d32 = cpu_to_be32(val); 352 353 ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t)); 354 355 if (ret < 0) 356 dev_err(&indio_dev->dev, "write failed (%d)", ret); 357 358 return ret; 359 } 360 361 static int ad9523_io_update(struct iio_dev *indio_dev) 362 { 363 return ad9523_write(indio_dev, AD9523_IO_UPDATE, AD9523_IO_UPDATE_EN); 364 } 365 366 static int ad9523_vco_out_map(struct iio_dev *indio_dev, 367 unsigned int ch, unsigned int out) 368 { 369 struct ad9523_state *st = iio_priv(indio_dev); 370 int ret; 371 unsigned int mask; 372 373 switch (ch) { 374 case 0 ... 3: 375 ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CHANNEL_CTRL); 376 if (ret < 0) 377 break; 378 mask = AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH0 << ch; 379 if (out) { 380 ret |= mask; 381 out = 2; 382 } else { 383 ret &= ~mask; 384 } 385 ret = ad9523_write(indio_dev, 386 AD9523_PLL1_OUTPUT_CHANNEL_CTRL, ret); 387 break; 388 case 4 ... 6: 389 ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CTRL); 390 if (ret < 0) 391 break; 392 mask = AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH4_M2 << (ch - 4); 393 if (out) 394 ret |= mask; 395 else 396 ret &= ~mask; 397 ret = ad9523_write(indio_dev, AD9523_PLL1_OUTPUT_CTRL, ret); 398 break; 399 case 7 ... 9: 400 ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CHANNEL_CTRL); 401 if (ret < 0) 402 break; 403 mask = AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH7_M2 << (ch - 7); 404 if (out) 405 ret |= mask; 406 else 407 ret &= ~mask; 408 ret = ad9523_write(indio_dev, 409 AD9523_PLL1_OUTPUT_CHANNEL_CTRL, ret); 410 break; 411 default: 412 return 0; 413 } 414 415 st->vco_out_map[ch] = out; 416 417 return ret; 418 } 419 420 static int ad9523_set_clock_provider(struct iio_dev *indio_dev, 421 unsigned int ch, unsigned long freq) 422 { 423 struct ad9523_state *st = iio_priv(indio_dev); 424 long tmp1, tmp2; 425 bool use_alt_clk_src; 426 427 switch (ch) { 428 case 0 ... 3: 429 use_alt_clk_src = (freq == st->vco_out_freq[AD9523_VCXO]); 430 break; 431 case 4 ... 9: 432 tmp1 = st->vco_out_freq[AD9523_VCO1] / freq; 433 tmp2 = st->vco_out_freq[AD9523_VCO2] / freq; 434 tmp1 *= freq; 435 tmp2 *= freq; 436 use_alt_clk_src = (abs(tmp1 - freq) > abs(tmp2 - freq)); 437 break; 438 default: 439 /* Ch 10..14: No action required, return success */ 440 return 0; 441 } 442 443 return ad9523_vco_out_map(indio_dev, ch, use_alt_clk_src); 444 } 445 446 static int ad9523_store_eeprom(struct iio_dev *indio_dev) 447 { 448 int ret, tmp; 449 450 ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL1, 451 AD9523_EEPROM_CTRL1_EEPROM_WRITE_PROT_DIS); 452 if (ret < 0) 453 return ret; 454 ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL2, 455 AD9523_EEPROM_CTRL2_REG2EEPROM); 456 if (ret < 0) 457 return ret; 458 459 tmp = 4; 460 do { 461 msleep(20); 462 ret = ad9523_read(indio_dev, 463 AD9523_EEPROM_DATA_XFER_STATUS); 464 if (ret < 0) 465 return ret; 466 } while ((ret & AD9523_EEPROM_DATA_XFER_IN_PROGRESS) && tmp--); 467 468 ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL1, 0); 469 if (ret < 0) 470 return ret; 471 472 ret = ad9523_read(indio_dev, AD9523_EEPROM_ERROR_READBACK); 473 if (ret < 0) 474 return ret; 475 476 if (ret & AD9523_EEPROM_ERROR_READBACK_FAIL) { 477 dev_err(&indio_dev->dev, "Verify EEPROM failed"); 478 ret = -EIO; 479 } 480 481 return ret; 482 } 483 484 static int ad9523_sync(struct iio_dev *indio_dev) 485 { 486 int ret, tmp; 487 488 ret = ad9523_read(indio_dev, AD9523_STATUS_SIGNALS); 489 if (ret < 0) 490 return ret; 491 492 tmp = ret; 493 tmp |= AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL; 494 495 ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, tmp); 496 if (ret < 0) 497 return ret; 498 499 ad9523_io_update(indio_dev); 500 tmp &= ~AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL; 501 502 ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, tmp); 503 if (ret < 0) 504 return ret; 505 506 return ad9523_io_update(indio_dev); 507 } 508 509 static ssize_t ad9523_store(struct device *dev, 510 struct device_attribute *attr, 511 const char *buf, size_t len) 512 { 513 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 514 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); 515 struct ad9523_state *st = iio_priv(indio_dev); 516 bool state; 517 int ret; 518 519 ret = strtobool(buf, &state); 520 if (ret < 0) 521 return ret; 522 523 if (!state) 524 return len; 525 526 mutex_lock(&st->lock); 527 switch ((u32)this_attr->address) { 528 case AD9523_SYNC: 529 ret = ad9523_sync(indio_dev); 530 break; 531 case AD9523_EEPROM: 532 ret = ad9523_store_eeprom(indio_dev); 533 break; 534 default: 535 ret = -ENODEV; 536 } 537 mutex_unlock(&st->lock); 538 539 return ret ? ret : len; 540 } 541 542 static ssize_t ad9523_show(struct device *dev, 543 struct device_attribute *attr, 544 char *buf) 545 { 546 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 547 struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); 548 struct ad9523_state *st = iio_priv(indio_dev); 549 int ret; 550 551 mutex_lock(&st->lock); 552 ret = ad9523_read(indio_dev, AD9523_READBACK_0); 553 if (ret >= 0) { 554 ret = sprintf(buf, "%d\n", !!(ret & (1 << 555 (u32)this_attr->address))); 556 } 557 mutex_unlock(&st->lock); 558 559 return ret; 560 } 561 562 static IIO_DEVICE_ATTR(pll1_locked, S_IRUGO, 563 ad9523_show, 564 NULL, 565 AD9523_STAT_PLL1_LD); 566 567 static IIO_DEVICE_ATTR(pll2_locked, S_IRUGO, 568 ad9523_show, 569 NULL, 570 AD9523_STAT_PLL2_LD); 571 572 static IIO_DEVICE_ATTR(pll1_reference_clk_a_present, S_IRUGO, 573 ad9523_show, 574 NULL, 575 AD9523_STAT_REFA); 576 577 static IIO_DEVICE_ATTR(pll1_reference_clk_b_present, S_IRUGO, 578 ad9523_show, 579 NULL, 580 AD9523_STAT_REFB); 581 582 static IIO_DEVICE_ATTR(pll1_reference_clk_test_present, S_IRUGO, 583 ad9523_show, 584 NULL, 585 AD9523_STAT_REF_TEST); 586 587 static IIO_DEVICE_ATTR(vcxo_clk_present, S_IRUGO, 588 ad9523_show, 589 NULL, 590 AD9523_STAT_VCXO); 591 592 static IIO_DEVICE_ATTR(pll2_feedback_clk_present, S_IRUGO, 593 ad9523_show, 594 NULL, 595 AD9523_STAT_PLL2_FB_CLK); 596 597 static IIO_DEVICE_ATTR(pll2_reference_clk_present, S_IRUGO, 598 ad9523_show, 599 NULL, 600 AD9523_STAT_PLL2_REF_CLK); 601 602 static IIO_DEVICE_ATTR(sync_dividers, S_IWUSR, 603 NULL, 604 ad9523_store, 605 AD9523_SYNC); 606 607 static IIO_DEVICE_ATTR(store_eeprom, S_IWUSR, 608 NULL, 609 ad9523_store, 610 AD9523_EEPROM); 611 612 static struct attribute *ad9523_attributes[] = { 613 &iio_dev_attr_sync_dividers.dev_attr.attr, 614 &iio_dev_attr_store_eeprom.dev_attr.attr, 615 &iio_dev_attr_pll2_feedback_clk_present.dev_attr.attr, 616 &iio_dev_attr_pll2_reference_clk_present.dev_attr.attr, 617 &iio_dev_attr_pll1_reference_clk_a_present.dev_attr.attr, 618 &iio_dev_attr_pll1_reference_clk_b_present.dev_attr.attr, 619 &iio_dev_attr_pll1_reference_clk_test_present.dev_attr.attr, 620 &iio_dev_attr_vcxo_clk_present.dev_attr.attr, 621 &iio_dev_attr_pll1_locked.dev_attr.attr, 622 &iio_dev_attr_pll2_locked.dev_attr.attr, 623 NULL, 624 }; 625 626 static const struct attribute_group ad9523_attribute_group = { 627 .attrs = ad9523_attributes, 628 }; 629 630 static int ad9523_read_raw(struct iio_dev *indio_dev, 631 struct iio_chan_spec const *chan, 632 int *val, 633 int *val2, 634 long m) 635 { 636 struct ad9523_state *st = iio_priv(indio_dev); 637 unsigned int code; 638 int ret; 639 640 mutex_lock(&st->lock); 641 ret = ad9523_read(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel)); 642 mutex_unlock(&st->lock); 643 644 if (ret < 0) 645 return ret; 646 647 switch (m) { 648 case IIO_CHAN_INFO_RAW: 649 *val = !(ret & AD9523_CLK_DIST_PWR_DOWN_EN); 650 return IIO_VAL_INT; 651 case IIO_CHAN_INFO_FREQUENCY: 652 *val = st->vco_out_freq[st->vco_out_map[chan->channel]] / 653 AD9523_CLK_DIST_DIV_REV(ret); 654 return IIO_VAL_INT; 655 case IIO_CHAN_INFO_PHASE: 656 code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) / 657 AD9523_CLK_DIST_DIV_REV(ret); 658 *val = code / 1000000; 659 *val2 = code % 1000000; 660 return IIO_VAL_INT_PLUS_MICRO; 661 default: 662 return -EINVAL; 663 } 664 }; 665 666 static int ad9523_write_raw(struct iio_dev *indio_dev, 667 struct iio_chan_spec const *chan, 668 int val, 669 int val2, 670 long mask) 671 { 672 struct ad9523_state *st = iio_priv(indio_dev); 673 unsigned int reg; 674 int ret, tmp, code; 675 676 mutex_lock(&st->lock); 677 ret = ad9523_read(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel)); 678 if (ret < 0) 679 goto out; 680 681 reg = ret; 682 683 switch (mask) { 684 case IIO_CHAN_INFO_RAW: 685 if (val) 686 reg &= ~AD9523_CLK_DIST_PWR_DOWN_EN; 687 else 688 reg |= AD9523_CLK_DIST_PWR_DOWN_EN; 689 break; 690 case IIO_CHAN_INFO_FREQUENCY: 691 if (val <= 0) { 692 ret = -EINVAL; 693 goto out; 694 } 695 ret = ad9523_set_clock_provider(indio_dev, chan->channel, val); 696 if (ret < 0) 697 goto out; 698 tmp = st->vco_out_freq[st->vco_out_map[chan->channel]] / val; 699 tmp = clamp(tmp, 1, 1024); 700 reg &= ~(0x3FF << 8); 701 reg |= AD9523_CLK_DIST_DIV(tmp); 702 break; 703 case IIO_CHAN_INFO_PHASE: 704 code = val * 1000000 + val2 % 1000000; 705 tmp = (code * AD9523_CLK_DIST_DIV_REV(ret)) / 3141592; 706 tmp = clamp(tmp, 0, 63); 707 reg &= ~AD9523_CLK_DIST_DIV_PHASE(~0); 708 reg |= AD9523_CLK_DIST_DIV_PHASE(tmp); 709 break; 710 default: 711 ret = -EINVAL; 712 goto out; 713 } 714 715 ret = ad9523_write(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel), 716 reg); 717 if (ret < 0) 718 goto out; 719 720 ad9523_io_update(indio_dev); 721 out: 722 mutex_unlock(&st->lock); 723 return ret; 724 } 725 726 static int ad9523_reg_access(struct iio_dev *indio_dev, 727 unsigned int reg, unsigned int writeval, 728 unsigned int *readval) 729 { 730 struct ad9523_state *st = iio_priv(indio_dev); 731 int ret; 732 733 mutex_lock(&st->lock); 734 if (readval == NULL) { 735 ret = ad9523_write(indio_dev, reg | AD9523_R1B, writeval); 736 ad9523_io_update(indio_dev); 737 } else { 738 ret = ad9523_read(indio_dev, reg | AD9523_R1B); 739 if (ret < 0) 740 goto out_unlock; 741 *readval = ret; 742 ret = 0; 743 } 744 745 out_unlock: 746 mutex_unlock(&st->lock); 747 748 return ret; 749 } 750 751 static const struct iio_info ad9523_info = { 752 .read_raw = &ad9523_read_raw, 753 .write_raw = &ad9523_write_raw, 754 .debugfs_reg_access = &ad9523_reg_access, 755 .attrs = &ad9523_attribute_group, 756 }; 757 758 static int ad9523_setup(struct iio_dev *indio_dev) 759 { 760 struct ad9523_state *st = iio_priv(indio_dev); 761 struct ad9523_platform_data *pdata = st->pdata; 762 struct ad9523_channel_spec *chan; 763 unsigned long active_mask = 0; 764 int ret, i; 765 766 ret = ad9523_write(indio_dev, AD9523_SERIAL_PORT_CONFIG, 767 AD9523_SER_CONF_SOFT_RESET | 768 (st->spi->mode & SPI_3WIRE ? 0 : 769 AD9523_SER_CONF_SDO_ACTIVE)); 770 if (ret < 0) 771 return ret; 772 773 ret = ad9523_write(indio_dev, AD9523_READBACK_CTRL, 774 AD9523_READBACK_CTRL_READ_BUFFERED); 775 if (ret < 0) 776 return ret; 777 778 ret = ad9523_io_update(indio_dev); 779 if (ret < 0) 780 return ret; 781 782 /* 783 * PLL1 Setup 784 */ 785 ret = ad9523_write(indio_dev, AD9523_PLL1_REF_A_DIVIDER, 786 pdata->refa_r_div); 787 if (ret < 0) 788 return ret; 789 790 ret = ad9523_write(indio_dev, AD9523_PLL1_REF_B_DIVIDER, 791 pdata->refb_r_div); 792 if (ret < 0) 793 return ret; 794 795 ret = ad9523_write(indio_dev, AD9523_PLL1_FEEDBACK_DIVIDER, 796 pdata->pll1_feedback_div); 797 if (ret < 0) 798 return ret; 799 800 ret = ad9523_write(indio_dev, AD9523_PLL1_CHARGE_PUMP_CTRL, 801 AD9523_PLL1_CHARGE_PUMP_CURRENT_nA(pdata-> 802 pll1_charge_pump_current_nA) | 803 AD9523_PLL1_CHARGE_PUMP_MODE_NORMAL | 804 AD9523_PLL1_BACKLASH_PW_MIN); 805 if (ret < 0) 806 return ret; 807 808 ret = ad9523_write(indio_dev, AD9523_PLL1_INPUT_RECEIVERS_CTRL, 809 AD_IF(refa_diff_rcv_en, AD9523_PLL1_REFA_RCV_EN) | 810 AD_IF(refb_diff_rcv_en, AD9523_PLL1_REFB_RCV_EN) | 811 AD_IF(osc_in_diff_en, AD9523_PLL1_OSC_IN_DIFF_EN) | 812 AD_IF(osc_in_cmos_neg_inp_en, 813 AD9523_PLL1_OSC_IN_CMOS_NEG_INP_EN) | 814 AD_IF(refa_diff_rcv_en, AD9523_PLL1_REFA_DIFF_RCV_EN) | 815 AD_IF(refb_diff_rcv_en, AD9523_PLL1_REFB_DIFF_RCV_EN)); 816 if (ret < 0) 817 return ret; 818 819 ret = ad9523_write(indio_dev, AD9523_PLL1_REF_CTRL, 820 AD_IF(zd_in_diff_en, AD9523_PLL1_ZD_IN_DIFF_EN) | 821 AD_IF(zd_in_cmos_neg_inp_en, 822 AD9523_PLL1_ZD_IN_CMOS_NEG_INP_EN) | 823 AD_IF(zero_delay_mode_internal_en, 824 AD9523_PLL1_ZERO_DELAY_MODE_INT) | 825 AD_IF(osc_in_feedback_en, AD9523_PLL1_OSC_IN_PLL_FEEDBACK_EN) | 826 AD_IF(refa_cmos_neg_inp_en, AD9523_PLL1_REFA_CMOS_NEG_INP_EN) | 827 AD_IF(refb_cmos_neg_inp_en, AD9523_PLL1_REFB_CMOS_NEG_INP_EN)); 828 if (ret < 0) 829 return ret; 830 831 ret = ad9523_write(indio_dev, AD9523_PLL1_MISC_CTRL, 832 AD9523_PLL1_REFB_INDEP_DIV_CTRL_EN | 833 AD9523_PLL1_REF_MODE(pdata->ref_mode)); 834 if (ret < 0) 835 return ret; 836 837 ret = ad9523_write(indio_dev, AD9523_PLL1_LOOP_FILTER_CTRL, 838 AD9523_PLL1_LOOP_FILTER_RZERO(pdata->pll1_loop_filter_rzero)); 839 if (ret < 0) 840 return ret; 841 /* 842 * PLL2 Setup 843 */ 844 845 ret = ad9523_write(indio_dev, AD9523_PLL2_CHARGE_PUMP, 846 AD9523_PLL2_CHARGE_PUMP_CURRENT_nA(pdata-> 847 pll2_charge_pump_current_nA)); 848 if (ret < 0) 849 return ret; 850 851 ret = ad9523_write(indio_dev, AD9523_PLL2_FEEDBACK_DIVIDER_AB, 852 AD9523_PLL2_FB_NDIV_A_CNT(pdata->pll2_ndiv_a_cnt) | 853 AD9523_PLL2_FB_NDIV_B_CNT(pdata->pll2_ndiv_b_cnt)); 854 if (ret < 0) 855 return ret; 856 857 ret = ad9523_write(indio_dev, AD9523_PLL2_CTRL, 858 AD9523_PLL2_CHARGE_PUMP_MODE_NORMAL | 859 AD9523_PLL2_BACKLASH_CTRL_EN | 860 AD_IF(pll2_freq_doubler_en, AD9523_PLL2_FREQ_DOUBLER_EN)); 861 if (ret < 0) 862 return ret; 863 864 st->vco_freq = div_u64((unsigned long long)pdata->vcxo_freq * 865 (pdata->pll2_freq_doubler_en ? 2 : 1) * 866 AD9523_PLL2_FB_NDIV(pdata->pll2_ndiv_a_cnt, 867 pdata->pll2_ndiv_b_cnt), 868 pdata->pll2_r2_div); 869 870 ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_CTRL, 871 AD9523_PLL2_VCO_CALIBRATE); 872 if (ret < 0) 873 return ret; 874 875 ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_DIVIDER, 876 AD9523_PLL2_VCO_DIV_M1(pdata->pll2_vco_div_m1) | 877 AD9523_PLL2_VCO_DIV_M2(pdata->pll2_vco_div_m2) | 878 AD_IFE(pll2_vco_div_m1, 0, 879 AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN) | 880 AD_IFE(pll2_vco_div_m2, 0, 881 AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN)); 882 if (ret < 0) 883 return ret; 884 885 if (pdata->pll2_vco_div_m1) 886 st->vco_out_freq[AD9523_VCO1] = 887 st->vco_freq / pdata->pll2_vco_div_m1; 888 889 if (pdata->pll2_vco_div_m2) 890 st->vco_out_freq[AD9523_VCO2] = 891 st->vco_freq / pdata->pll2_vco_div_m2; 892 893 st->vco_out_freq[AD9523_VCXO] = pdata->vcxo_freq; 894 895 ret = ad9523_write(indio_dev, AD9523_PLL2_R2_DIVIDER, 896 AD9523_PLL2_R2_DIVIDER_VAL(pdata->pll2_r2_div)); 897 if (ret < 0) 898 return ret; 899 900 ret = ad9523_write(indio_dev, AD9523_PLL2_LOOP_FILTER_CTRL, 901 AD9523_PLL2_LOOP_FILTER_CPOLE1(pdata->cpole1) | 902 AD9523_PLL2_LOOP_FILTER_RZERO(pdata->rzero) | 903 AD9523_PLL2_LOOP_FILTER_RPOLE2(pdata->rpole2) | 904 AD_IF(rzero_bypass_en, 905 AD9523_PLL2_LOOP_FILTER_RZERO_BYPASS_EN)); 906 if (ret < 0) 907 return ret; 908 909 for (i = 0; i < pdata->num_channels; i++) { 910 chan = &pdata->channels[i]; 911 if (chan->channel_num < AD9523_NUM_CHAN) { 912 __set_bit(chan->channel_num, &active_mask); 913 ret = ad9523_write(indio_dev, 914 AD9523_CHANNEL_CLOCK_DIST(chan->channel_num), 915 AD9523_CLK_DIST_DRIVER_MODE(chan->driver_mode) | 916 AD9523_CLK_DIST_DIV(chan->channel_divider) | 917 AD9523_CLK_DIST_DIV_PHASE(chan->divider_phase) | 918 (chan->sync_ignore_en ? 919 AD9523_CLK_DIST_IGNORE_SYNC_EN : 0) | 920 (chan->divider_output_invert_en ? 921 AD9523_CLK_DIST_INV_DIV_OUTPUT_EN : 0) | 922 (chan->low_power_mode_en ? 923 AD9523_CLK_DIST_LOW_PWR_MODE_EN : 0) | 924 (chan->output_dis ? 925 AD9523_CLK_DIST_PWR_DOWN_EN : 0)); 926 if (ret < 0) 927 return ret; 928 929 ret = ad9523_vco_out_map(indio_dev, chan->channel_num, 930 chan->use_alt_clock_src); 931 if (ret < 0) 932 return ret; 933 934 st->ad9523_channels[i].type = IIO_ALTVOLTAGE; 935 st->ad9523_channels[i].output = 1; 936 st->ad9523_channels[i].indexed = 1; 937 st->ad9523_channels[i].channel = chan->channel_num; 938 st->ad9523_channels[i].extend_name = 939 chan->extended_name; 940 st->ad9523_channels[i].info_mask_separate = 941 BIT(IIO_CHAN_INFO_RAW) | 942 BIT(IIO_CHAN_INFO_PHASE) | 943 BIT(IIO_CHAN_INFO_FREQUENCY); 944 } 945 } 946 947 for_each_clear_bit(i, &active_mask, AD9523_NUM_CHAN) { 948 ret = ad9523_write(indio_dev, 949 AD9523_CHANNEL_CLOCK_DIST(i), 950 AD9523_CLK_DIST_DRIVER_MODE(TRISTATE) | 951 AD9523_CLK_DIST_PWR_DOWN_EN); 952 if (ret < 0) 953 return ret; 954 } 955 956 ret = ad9523_write(indio_dev, AD9523_POWER_DOWN_CTRL, 0); 957 if (ret < 0) 958 return ret; 959 960 ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, 961 AD9523_STATUS_MONITOR_01_PLL12_LOCKED); 962 if (ret < 0) 963 return ret; 964 965 ret = ad9523_io_update(indio_dev); 966 if (ret < 0) 967 return ret; 968 969 return 0; 970 } 971 972 static void ad9523_reg_disable(void *data) 973 { 974 struct regulator *reg = data; 975 976 regulator_disable(reg); 977 } 978 979 static int ad9523_probe(struct spi_device *spi) 980 { 981 struct ad9523_platform_data *pdata = spi->dev.platform_data; 982 struct iio_dev *indio_dev; 983 struct ad9523_state *st; 984 int ret; 985 986 if (!pdata) { 987 dev_err(&spi->dev, "no platform data?\n"); 988 return -EINVAL; 989 } 990 991 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); 992 if (indio_dev == NULL) 993 return -ENOMEM; 994 995 st = iio_priv(indio_dev); 996 997 mutex_init(&st->lock); 998 999 st->reg = devm_regulator_get(&spi->dev, "vcc"); 1000 if (!IS_ERR(st->reg)) { 1001 ret = regulator_enable(st->reg); 1002 if (ret) 1003 return ret; 1004 1005 ret = devm_add_action_or_reset(&spi->dev, ad9523_reg_disable, 1006 st->reg); 1007 if (ret) 1008 return ret; 1009 } 1010 1011 st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", 1012 GPIOD_OUT_HIGH); 1013 if (IS_ERR(st->pwrdown_gpio)) 1014 return PTR_ERR(st->pwrdown_gpio); 1015 1016 st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", 1017 GPIOD_OUT_LOW); 1018 if (IS_ERR(st->reset_gpio)) 1019 return PTR_ERR(st->reset_gpio); 1020 1021 if (st->reset_gpio) { 1022 udelay(1); 1023 gpiod_direction_output(st->reset_gpio, 1); 1024 } 1025 1026 st->sync_gpio = devm_gpiod_get_optional(&spi->dev, "sync", 1027 GPIOD_OUT_HIGH); 1028 if (IS_ERR(st->sync_gpio)) 1029 return PTR_ERR(st->sync_gpio); 1030 1031 spi_set_drvdata(spi, indio_dev); 1032 st->spi = spi; 1033 st->pdata = pdata; 1034 1035 indio_dev->name = (pdata->name[0] != 0) ? pdata->name : 1036 spi_get_device_id(spi)->name; 1037 indio_dev->info = &ad9523_info; 1038 indio_dev->modes = INDIO_DIRECT_MODE; 1039 indio_dev->channels = st->ad9523_channels; 1040 indio_dev->num_channels = pdata->num_channels; 1041 1042 ret = ad9523_setup(indio_dev); 1043 if (ret < 0) 1044 return ret; 1045 1046 return devm_iio_device_register(&spi->dev, indio_dev); 1047 } 1048 1049 static const struct spi_device_id ad9523_id[] = { 1050 {"ad9523-1", 9523}, 1051 {} 1052 }; 1053 MODULE_DEVICE_TABLE(spi, ad9523_id); 1054 1055 static struct spi_driver ad9523_driver = { 1056 .driver = { 1057 .name = "ad9523", 1058 }, 1059 .probe = ad9523_probe, 1060 .id_table = ad9523_id, 1061 }; 1062 module_spi_driver(ad9523_driver); 1063 1064 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); 1065 MODULE_DESCRIPTION("Analog Devices AD9523 CLOCKDIST/PLL"); 1066 MODULE_LICENSE("GPL v2"); 1067