1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * LTC2632 Digital to analog convertors spi driver 4 * 5 * Copyright 2017 Maxime Roussin-Bélanger 6 * expanded by Silvan Murer <silvan.murer@gmail.com> 7 */ 8 9 #include <linux/device.h> 10 #include <linux/spi/spi.h> 11 #include <linux/module.h> 12 #include <linux/iio/iio.h> 13 #include <linux/regulator/consumer.h> 14 15 #include <asm/unaligned.h> 16 17 #define LTC2632_CMD_WRITE_INPUT_N 0x0 18 #define LTC2632_CMD_UPDATE_DAC_N 0x1 19 #define LTC2632_CMD_WRITE_INPUT_N_UPDATE_ALL 0x2 20 #define LTC2632_CMD_WRITE_INPUT_N_UPDATE_N 0x3 21 #define LTC2632_CMD_POWERDOWN_DAC_N 0x4 22 #define LTC2632_CMD_POWERDOWN_CHIP 0x5 23 #define LTC2632_CMD_INTERNAL_REFER 0x6 24 #define LTC2632_CMD_EXTERNAL_REFER 0x7 25 26 /** 27 * struct ltc2632_chip_info - chip specific information 28 * @channels: channel spec for the DAC 29 * @num_channels: DAC channel count of the chip 30 * @vref_mv: internal reference voltage 31 */ 32 struct ltc2632_chip_info { 33 const struct iio_chan_spec *channels; 34 const size_t num_channels; 35 const int vref_mv; 36 }; 37 38 /** 39 * struct ltc2632_state - driver instance specific data 40 * @spi_dev: pointer to the spi_device struct 41 * @powerdown_cache_mask: used to show current channel powerdown state 42 * @vref_mv: used reference voltage (internal or external) 43 * @vref_reg: regulator for the reference voltage 44 */ 45 struct ltc2632_state { 46 struct spi_device *spi_dev; 47 unsigned int powerdown_cache_mask; 48 int vref_mv; 49 struct regulator *vref_reg; 50 }; 51 52 enum ltc2632_supported_device_ids { 53 ID_LTC2632L12, 54 ID_LTC2632L10, 55 ID_LTC2632L8, 56 ID_LTC2632H12, 57 ID_LTC2632H10, 58 ID_LTC2632H8, 59 ID_LTC2634L12, 60 ID_LTC2634L10, 61 ID_LTC2634L8, 62 ID_LTC2634H12, 63 ID_LTC2634H10, 64 ID_LTC2634H8, 65 ID_LTC2636L12, 66 ID_LTC2636L10, 67 ID_LTC2636L8, 68 ID_LTC2636H12, 69 ID_LTC2636H10, 70 ID_LTC2636H8, 71 }; 72 73 static int ltc2632_spi_write(struct spi_device *spi, 74 u8 cmd, u8 addr, u16 val, u8 shift) 75 { 76 u32 data; 77 u8 msg[3]; 78 79 /* 80 * The input shift register is 24 bits wide. 81 * The next four are the command bits, C3 to C0, 82 * followed by the 4-bit DAC address, A3 to A0, and then the 83 * 12-, 10-, 8-bit data-word. The data-word comprises the 12-, 84 * 10-, 8-bit input code followed by 4, 6, or 8 don't care bits. 85 */ 86 data = (cmd << 20) | (addr << 16) | (val << shift); 87 put_unaligned_be24(data, &msg[0]); 88 89 return spi_write(spi, msg, sizeof(msg)); 90 } 91 92 static int ltc2632_read_raw(struct iio_dev *indio_dev, 93 struct iio_chan_spec const *chan, 94 int *val, 95 int *val2, 96 long m) 97 { 98 const struct ltc2632_state *st = iio_priv(indio_dev); 99 100 switch (m) { 101 case IIO_CHAN_INFO_SCALE: 102 *val = st->vref_mv; 103 *val2 = chan->scan_type.realbits; 104 return IIO_VAL_FRACTIONAL_LOG2; 105 } 106 return -EINVAL; 107 } 108 109 static int ltc2632_write_raw(struct iio_dev *indio_dev, 110 struct iio_chan_spec const *chan, 111 int val, 112 int val2, 113 long mask) 114 { 115 struct ltc2632_state *st = iio_priv(indio_dev); 116 117 switch (mask) { 118 case IIO_CHAN_INFO_RAW: 119 if (val >= (1 << chan->scan_type.realbits) || val < 0) 120 return -EINVAL; 121 122 return ltc2632_spi_write(st->spi_dev, 123 LTC2632_CMD_WRITE_INPUT_N_UPDATE_N, 124 chan->address, val, 125 chan->scan_type.shift); 126 default: 127 return -EINVAL; 128 } 129 } 130 131 static ssize_t ltc2632_read_dac_powerdown(struct iio_dev *indio_dev, 132 uintptr_t private, 133 const struct iio_chan_spec *chan, 134 char *buf) 135 { 136 struct ltc2632_state *st = iio_priv(indio_dev); 137 138 return sysfs_emit(buf, "%d\n", 139 !!(st->powerdown_cache_mask & (1 << chan->channel))); 140 } 141 142 static ssize_t ltc2632_write_dac_powerdown(struct iio_dev *indio_dev, 143 uintptr_t private, 144 const struct iio_chan_spec *chan, 145 const char *buf, 146 size_t len) 147 { 148 bool pwr_down; 149 int ret; 150 struct ltc2632_state *st = iio_priv(indio_dev); 151 152 ret = strtobool(buf, &pwr_down); 153 if (ret) 154 return ret; 155 156 if (pwr_down) 157 st->powerdown_cache_mask |= (1 << chan->channel); 158 else 159 st->powerdown_cache_mask &= ~(1 << chan->channel); 160 161 ret = ltc2632_spi_write(st->spi_dev, 162 LTC2632_CMD_POWERDOWN_DAC_N, 163 chan->channel, 0, 0); 164 165 return ret ? ret : len; 166 } 167 168 static const struct iio_info ltc2632_info = { 169 .write_raw = ltc2632_write_raw, 170 .read_raw = ltc2632_read_raw, 171 }; 172 173 static const struct iio_chan_spec_ext_info ltc2632_ext_info[] = { 174 { 175 .name = "powerdown", 176 .read = ltc2632_read_dac_powerdown, 177 .write = ltc2632_write_dac_powerdown, 178 .shared = IIO_SEPARATE, 179 }, 180 { }, 181 }; 182 183 #define LTC2632_CHANNEL(_chan, _bits) { \ 184 .type = IIO_VOLTAGE, \ 185 .indexed = 1, \ 186 .output = 1, \ 187 .channel = (_chan), \ 188 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 189 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ 190 .address = (_chan), \ 191 .scan_type = { \ 192 .realbits = (_bits), \ 193 .shift = 16 - (_bits), \ 194 }, \ 195 .ext_info = ltc2632_ext_info, \ 196 } 197 198 #define DECLARE_LTC2632_CHANNELS(_name, _bits) \ 199 const struct iio_chan_spec _name ## _channels[] = { \ 200 LTC2632_CHANNEL(0, _bits), \ 201 LTC2632_CHANNEL(1, _bits), \ 202 LTC2632_CHANNEL(2, _bits), \ 203 LTC2632_CHANNEL(3, _bits), \ 204 LTC2632_CHANNEL(4, _bits), \ 205 LTC2632_CHANNEL(5, _bits), \ 206 LTC2632_CHANNEL(6, _bits), \ 207 LTC2632_CHANNEL(7, _bits), \ 208 } 209 210 static DECLARE_LTC2632_CHANNELS(ltc2632x12, 12); 211 static DECLARE_LTC2632_CHANNELS(ltc2632x10, 10); 212 static DECLARE_LTC2632_CHANNELS(ltc2632x8, 8); 213 214 static const struct ltc2632_chip_info ltc2632_chip_info_tbl[] = { 215 [ID_LTC2632L12] = { 216 .channels = ltc2632x12_channels, 217 .num_channels = 2, 218 .vref_mv = 2500, 219 }, 220 [ID_LTC2632L10] = { 221 .channels = ltc2632x10_channels, 222 .num_channels = 2, 223 .vref_mv = 2500, 224 }, 225 [ID_LTC2632L8] = { 226 .channels = ltc2632x8_channels, 227 .num_channels = 2, 228 .vref_mv = 2500, 229 }, 230 [ID_LTC2632H12] = { 231 .channels = ltc2632x12_channels, 232 .num_channels = 2, 233 .vref_mv = 4096, 234 }, 235 [ID_LTC2632H10] = { 236 .channels = ltc2632x10_channels, 237 .num_channels = 2, 238 .vref_mv = 4096, 239 }, 240 [ID_LTC2632H8] = { 241 .channels = ltc2632x8_channels, 242 .num_channels = 2, 243 .vref_mv = 4096, 244 }, 245 [ID_LTC2634L12] = { 246 .channels = ltc2632x12_channels, 247 .num_channels = 4, 248 .vref_mv = 2500, 249 }, 250 [ID_LTC2634L10] = { 251 .channels = ltc2632x10_channels, 252 .num_channels = 4, 253 .vref_mv = 2500, 254 }, 255 [ID_LTC2634L8] = { 256 .channels = ltc2632x8_channels, 257 .num_channels = 4, 258 .vref_mv = 2500, 259 }, 260 [ID_LTC2634H12] = { 261 .channels = ltc2632x12_channels, 262 .num_channels = 4, 263 .vref_mv = 4096, 264 }, 265 [ID_LTC2634H10] = { 266 .channels = ltc2632x10_channels, 267 .num_channels = 4, 268 .vref_mv = 4096, 269 }, 270 [ID_LTC2634H8] = { 271 .channels = ltc2632x8_channels, 272 .num_channels = 4, 273 .vref_mv = 4096, 274 }, 275 [ID_LTC2636L12] = { 276 .channels = ltc2632x12_channels, 277 .num_channels = 8, 278 .vref_mv = 2500, 279 }, 280 [ID_LTC2636L10] = { 281 .channels = ltc2632x10_channels, 282 .num_channels = 8, 283 .vref_mv = 2500, 284 }, 285 [ID_LTC2636L8] = { 286 .channels = ltc2632x8_channels, 287 .num_channels = 8, 288 .vref_mv = 2500, 289 }, 290 [ID_LTC2636H12] = { 291 .channels = ltc2632x12_channels, 292 .num_channels = 8, 293 .vref_mv = 4096, 294 }, 295 [ID_LTC2636H10] = { 296 .channels = ltc2632x10_channels, 297 .num_channels = 8, 298 .vref_mv = 4096, 299 }, 300 [ID_LTC2636H8] = { 301 .channels = ltc2632x8_channels, 302 .num_channels = 8, 303 .vref_mv = 4096, 304 }, 305 }; 306 307 static int ltc2632_probe(struct spi_device *spi) 308 { 309 struct ltc2632_state *st; 310 struct iio_dev *indio_dev; 311 struct ltc2632_chip_info *chip_info; 312 int ret; 313 314 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); 315 if (!indio_dev) 316 return -ENOMEM; 317 318 st = iio_priv(indio_dev); 319 320 spi_set_drvdata(spi, indio_dev); 321 st->spi_dev = spi; 322 323 chip_info = (struct ltc2632_chip_info *) 324 spi_get_device_id(spi)->driver_data; 325 326 st->vref_reg = devm_regulator_get_optional(&spi->dev, "vref"); 327 if (PTR_ERR(st->vref_reg) == -ENODEV) { 328 /* use internal reference voltage */ 329 st->vref_reg = NULL; 330 st->vref_mv = chip_info->vref_mv; 331 332 ret = ltc2632_spi_write(spi, LTC2632_CMD_INTERNAL_REFER, 333 0, 0, 0); 334 if (ret) { 335 dev_err(&spi->dev, 336 "Set internal reference command failed, %d\n", 337 ret); 338 return ret; 339 } 340 } else if (IS_ERR(st->vref_reg)) { 341 dev_err(&spi->dev, 342 "Error getting voltage reference regulator\n"); 343 return PTR_ERR(st->vref_reg); 344 } else { 345 /* use external reference voltage */ 346 ret = regulator_enable(st->vref_reg); 347 if (ret) { 348 dev_err(&spi->dev, 349 "enable reference regulator failed, %d\n", 350 ret); 351 return ret; 352 } 353 st->vref_mv = regulator_get_voltage(st->vref_reg) / 1000; 354 355 ret = ltc2632_spi_write(spi, LTC2632_CMD_EXTERNAL_REFER, 356 0, 0, 0); 357 if (ret) { 358 dev_err(&spi->dev, 359 "Set external reference command failed, %d\n", 360 ret); 361 return ret; 362 } 363 } 364 365 indio_dev->name = dev_of_node(&spi->dev) ? dev_of_node(&spi->dev)->name 366 : spi_get_device_id(spi)->name; 367 indio_dev->info = <c2632_info; 368 indio_dev->modes = INDIO_DIRECT_MODE; 369 indio_dev->channels = chip_info->channels; 370 indio_dev->num_channels = chip_info->num_channels; 371 372 return iio_device_register(indio_dev); 373 } 374 375 static int ltc2632_remove(struct spi_device *spi) 376 { 377 struct iio_dev *indio_dev = spi_get_drvdata(spi); 378 struct ltc2632_state *st = iio_priv(indio_dev); 379 380 iio_device_unregister(indio_dev); 381 382 if (st->vref_reg) 383 regulator_disable(st->vref_reg); 384 385 return 0; 386 } 387 388 static const struct spi_device_id ltc2632_id[] = { 389 { "ltc2632-l12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L12] }, 390 { "ltc2632-l10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L10] }, 391 { "ltc2632-l8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L8] }, 392 { "ltc2632-h12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H12] }, 393 { "ltc2632-h10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H10] }, 394 { "ltc2632-h8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H8] }, 395 { "ltc2634-l12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634L12] }, 396 { "ltc2634-l10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634L10] }, 397 { "ltc2634-l8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634L8] }, 398 { "ltc2634-h12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634H12] }, 399 { "ltc2634-h10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634H10] }, 400 { "ltc2634-h8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2634H8] }, 401 { "ltc2636-l12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636L12] }, 402 { "ltc2636-l10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636L10] }, 403 { "ltc2636-l8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636L8] }, 404 { "ltc2636-h12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636H12] }, 405 { "ltc2636-h10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636H10] }, 406 { "ltc2636-h8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2636H8] }, 407 {} 408 }; 409 MODULE_DEVICE_TABLE(spi, ltc2632_id); 410 411 static const struct of_device_id ltc2632_of_match[] = { 412 { 413 .compatible = "lltc,ltc2632-l12", 414 .data = <c2632_chip_info_tbl[ID_LTC2632L12] 415 }, { 416 .compatible = "lltc,ltc2632-l10", 417 .data = <c2632_chip_info_tbl[ID_LTC2632L10] 418 }, { 419 .compatible = "lltc,ltc2632-l8", 420 .data = <c2632_chip_info_tbl[ID_LTC2632L8] 421 }, { 422 .compatible = "lltc,ltc2632-h12", 423 .data = <c2632_chip_info_tbl[ID_LTC2632H12] 424 }, { 425 .compatible = "lltc,ltc2632-h10", 426 .data = <c2632_chip_info_tbl[ID_LTC2632H10] 427 }, { 428 .compatible = "lltc,ltc2632-h8", 429 .data = <c2632_chip_info_tbl[ID_LTC2632H8] 430 }, { 431 .compatible = "lltc,ltc2634-l12", 432 .data = <c2632_chip_info_tbl[ID_LTC2634L12] 433 }, { 434 .compatible = "lltc,ltc2634-l10", 435 .data = <c2632_chip_info_tbl[ID_LTC2634L10] 436 }, { 437 .compatible = "lltc,ltc2634-l8", 438 .data = <c2632_chip_info_tbl[ID_LTC2634L8] 439 }, { 440 .compatible = "lltc,ltc2634-h12", 441 .data = <c2632_chip_info_tbl[ID_LTC2634H12] 442 }, { 443 .compatible = "lltc,ltc2634-h10", 444 .data = <c2632_chip_info_tbl[ID_LTC2634H10] 445 }, { 446 .compatible = "lltc,ltc2634-h8", 447 .data = <c2632_chip_info_tbl[ID_LTC2634H8] 448 }, { 449 .compatible = "lltc,ltc2636-l12", 450 .data = <c2632_chip_info_tbl[ID_LTC2636L12] 451 }, { 452 .compatible = "lltc,ltc2636-l10", 453 .data = <c2632_chip_info_tbl[ID_LTC2636L10] 454 }, { 455 .compatible = "lltc,ltc2636-l8", 456 .data = <c2632_chip_info_tbl[ID_LTC2636L8] 457 }, { 458 .compatible = "lltc,ltc2636-h12", 459 .data = <c2632_chip_info_tbl[ID_LTC2636H12] 460 }, { 461 .compatible = "lltc,ltc2636-h10", 462 .data = <c2632_chip_info_tbl[ID_LTC2636H10] 463 }, { 464 .compatible = "lltc,ltc2636-h8", 465 .data = <c2632_chip_info_tbl[ID_LTC2636H8] 466 }, 467 {} 468 }; 469 MODULE_DEVICE_TABLE(of, ltc2632_of_match); 470 471 static struct spi_driver ltc2632_driver = { 472 .driver = { 473 .name = "ltc2632", 474 .of_match_table = of_match_ptr(ltc2632_of_match), 475 }, 476 .probe = ltc2632_probe, 477 .remove = ltc2632_remove, 478 .id_table = ltc2632_id, 479 }; 480 module_spi_driver(ltc2632_driver); 481 482 MODULE_AUTHOR("Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>"); 483 MODULE_DESCRIPTION("LTC2632 DAC SPI driver"); 484 MODULE_LICENSE("GPL v2"); 485