1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Analog Devices AD3552R
4 * Digital to Analog converter driver
5 *
6 * Copyright 2021 Analog Devices Inc.
7 */
8 #include <asm/unaligned.h>
9 #include <linux/device.h>
10 #include <linux/iio/triggered_buffer.h>
11 #include <linux/iio/trigger_consumer.h>
12 #include <linux/iopoll.h>
13 #include <linux/kernel.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/spi/spi.h>
16
17 /* Register addresses */
18 /* Primary address space */
19 #define AD3552R_REG_ADDR_INTERFACE_CONFIG_A 0x00
20 #define AD3552R_MASK_SOFTWARE_RESET (BIT(7) | BIT(0))
21 #define AD3552R_MASK_ADDR_ASCENSION BIT(5)
22 #define AD3552R_MASK_SDO_ACTIVE BIT(4)
23 #define AD3552R_REG_ADDR_INTERFACE_CONFIG_B 0x01
24 #define AD3552R_MASK_SINGLE_INST BIT(7)
25 #define AD3552R_MASK_SHORT_INSTRUCTION BIT(3)
26 #define AD3552R_REG_ADDR_DEVICE_CONFIG 0x02
27 #define AD3552R_MASK_DEVICE_STATUS(n) BIT(4 + (n))
28 #define AD3552R_MASK_CUSTOM_MODES GENMASK(3, 2)
29 #define AD3552R_MASK_OPERATING_MODES GENMASK(1, 0)
30 #define AD3552R_REG_ADDR_CHIP_TYPE 0x03
31 #define AD3552R_MASK_CLASS GENMASK(7, 0)
32 #define AD3552R_REG_ADDR_PRODUCT_ID_L 0x04
33 #define AD3552R_REG_ADDR_PRODUCT_ID_H 0x05
34 #define AD3552R_REG_ADDR_CHIP_GRADE 0x06
35 #define AD3552R_MASK_GRADE GENMASK(7, 4)
36 #define AD3552R_MASK_DEVICE_REVISION GENMASK(3, 0)
37 #define AD3552R_REG_ADDR_SCRATCH_PAD 0x0A
38 #define AD3552R_REG_ADDR_SPI_REVISION 0x0B
39 #define AD3552R_REG_ADDR_VENDOR_L 0x0C
40 #define AD3552R_REG_ADDR_VENDOR_H 0x0D
41 #define AD3552R_REG_ADDR_STREAM_MODE 0x0E
42 #define AD3552R_MASK_LENGTH GENMASK(7, 0)
43 #define AD3552R_REG_ADDR_TRANSFER_REGISTER 0x0F
44 #define AD3552R_MASK_MULTI_IO_MODE GENMASK(7, 6)
45 #define AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE BIT(2)
46 #define AD3552R_REG_ADDR_INTERFACE_CONFIG_C 0x10
47 #define AD3552R_MASK_CRC_ENABLE (GENMASK(7, 6) |\
48 GENMASK(1, 0))
49 #define AD3552R_MASK_STRICT_REGISTER_ACCESS BIT(5)
50 #define AD3552R_REG_ADDR_INTERFACE_STATUS_A 0x11
51 #define AD3552R_MASK_INTERFACE_NOT_READY BIT(7)
52 #define AD3552R_MASK_CLOCK_COUNTING_ERROR BIT(5)
53 #define AD3552R_MASK_INVALID_OR_NO_CRC BIT(3)
54 #define AD3552R_MASK_WRITE_TO_READ_ONLY_REGISTER BIT(2)
55 #define AD3552R_MASK_PARTIAL_REGISTER_ACCESS BIT(1)
56 #define AD3552R_MASK_REGISTER_ADDRESS_INVALID BIT(0)
57 #define AD3552R_REG_ADDR_INTERFACE_CONFIG_D 0x14
58 #define AD3552R_MASK_ALERT_ENABLE_PULLUP BIT(6)
59 #define AD3552R_MASK_MEM_CRC_EN BIT(4)
60 #define AD3552R_MASK_SDO_DRIVE_STRENGTH GENMASK(3, 2)
61 #define AD3552R_MASK_DUAL_SPI_SYNCHROUNOUS_EN BIT(1)
62 #define AD3552R_MASK_SPI_CONFIG_DDR BIT(0)
63 #define AD3552R_REG_ADDR_SH_REFERENCE_CONFIG 0x15
64 #define AD3552R_MASK_IDUMP_FAST_MODE BIT(6)
65 #define AD3552R_MASK_SAMPLE_HOLD_DIFFERENTIAL_USER_EN BIT(5)
66 #define AD3552R_MASK_SAMPLE_HOLD_USER_TRIM GENMASK(4, 3)
67 #define AD3552R_MASK_SAMPLE_HOLD_USER_ENABLE BIT(2)
68 #define AD3552R_MASK_REFERENCE_VOLTAGE_SEL GENMASK(1, 0)
69 #define AD3552R_REG_ADDR_ERR_ALARM_MASK 0x16
70 #define AD3552R_MASK_REF_RANGE_ALARM BIT(6)
71 #define AD3552R_MASK_CLOCK_COUNT_ERR_ALARM BIT(5)
72 #define AD3552R_MASK_MEM_CRC_ERR_ALARM BIT(4)
73 #define AD3552R_MASK_SPI_CRC_ERR_ALARM BIT(3)
74 #define AD3552R_MASK_WRITE_TO_READ_ONLY_ALARM BIT(2)
75 #define AD3552R_MASK_PARTIAL_REGISTER_ACCESS_ALARM BIT(1)
76 #define AD3552R_MASK_REGISTER_ADDRESS_INVALID_ALARM BIT(0)
77 #define AD3552R_REG_ADDR_ERR_STATUS 0x17
78 #define AD3552R_MASK_REF_RANGE_ERR_STATUS BIT(6)
79 #define AD3552R_MASK_DUAL_SPI_STREAM_EXCEEDS_DAC_ERR_STATUS BIT(5)
80 #define AD3552R_MASK_MEM_CRC_ERR_STATUS BIT(4)
81 #define AD3552R_MASK_RESET_STATUS BIT(0)
82 #define AD3552R_REG_ADDR_POWERDOWN_CONFIG 0x18
83 #define AD3552R_MASK_CH_DAC_POWERDOWN(ch) BIT(4 + (ch))
84 #define AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(ch) BIT(ch)
85 #define AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE 0x19
86 #define AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch) ((ch) ? GENMASK(7, 4) :\
87 GENMASK(3, 0))
88 #define AD3552R_REG_ADDR_CH_OFFSET(ch) (0x1B + (ch) * 2)
89 #define AD3552R_MASK_CH_OFFSET_BITS_0_7 GENMASK(7, 0)
90 #define AD3552R_REG_ADDR_CH_GAIN(ch) (0x1C + (ch) * 2)
91 #define AD3552R_MASK_CH_RANGE_OVERRIDE BIT(7)
92 #define AD3552R_MASK_CH_GAIN_SCALING_N GENMASK(6, 5)
93 #define AD3552R_MASK_CH_GAIN_SCALING_P GENMASK(4, 3)
94 #define AD3552R_MASK_CH_OFFSET_POLARITY BIT(2)
95 #define AD3552R_MASK_CH_OFFSET_BIT_8 BIT(0)
96 /*
97 * Secondary region
98 * For multibyte registers specify the highest address because the access is
99 * done in descending order
100 */
101 #define AD3552R_SECONDARY_REGION_START 0x28
102 #define AD3552R_REG_ADDR_HW_LDAC_16B 0x28
103 #define AD3552R_REG_ADDR_CH_DAC_16B(ch) (0x2C - (1 - ch) * 2)
104 #define AD3552R_REG_ADDR_DAC_PAGE_MASK_16B 0x2E
105 #define AD3552R_REG_ADDR_CH_SELECT_16B 0x2F
106 #define AD3552R_REG_ADDR_INPUT_PAGE_MASK_16B 0x31
107 #define AD3552R_REG_ADDR_SW_LDAC_16B 0x32
108 #define AD3552R_REG_ADDR_CH_INPUT_16B(ch) (0x36 - (1 - ch) * 2)
109 /* 3 bytes registers */
110 #define AD3552R_REG_START_24B 0x37
111 #define AD3552R_REG_ADDR_HW_LDAC_24B 0x37
112 #define AD3552R_REG_ADDR_CH_DAC_24B(ch) (0x3D - (1 - ch) * 3)
113 #define AD3552R_REG_ADDR_DAC_PAGE_MASK_24B 0x40
114 #define AD3552R_REG_ADDR_CH_SELECT_24B 0x41
115 #define AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B 0x44
116 #define AD3552R_REG_ADDR_SW_LDAC_24B 0x45
117 #define AD3552R_REG_ADDR_CH_INPUT_24B(ch) (0x4B - (1 - ch) * 3)
118
119 /* Useful defines */
120 #define AD3552R_NUM_CH 2
121 #define AD3552R_MASK_CH(ch) BIT(ch)
122 #define AD3552R_MASK_ALL_CH GENMASK(1, 0)
123 #define AD3552R_MAX_REG_SIZE 3
124 #define AD3552R_READ_BIT BIT(7)
125 #define AD3552R_ADDR_MASK GENMASK(6, 0)
126 #define AD3552R_MASK_DAC_12B 0xFFF0
127 #define AD3552R_DEFAULT_CONFIG_B_VALUE 0x8
128 #define AD3552R_SCRATCH_PAD_TEST_VAL1 0x34
129 #define AD3552R_SCRATCH_PAD_TEST_VAL2 0xB2
130 #define AD3552R_GAIN_SCALE 1000
131 #define AD3552R_LDAC_PULSE_US 100
132
133 enum ad3552r_ch_vref_select {
134 /* Internal source with Vref I/O floating */
135 AD3552R_INTERNAL_VREF_PIN_FLOATING,
136 /* Internal source with Vref I/O at 2.5V */
137 AD3552R_INTERNAL_VREF_PIN_2P5V,
138 /* External source with Vref I/O as input */
139 AD3552R_EXTERNAL_VREF_PIN_INPUT
140 };
141
142 enum ad3542r_id {
143 AD3542R_ID = 0x4009,
144 AD3552R_ID = 0x4008,
145 };
146
147 enum ad3552r_ch_output_range {
148 /* Range from 0 V to 2.5 V. Requires Rfb1x connection */
149 AD3552R_CH_OUTPUT_RANGE_0__2P5V,
150 /* Range from 0 V to 5 V. Requires Rfb1x connection */
151 AD3552R_CH_OUTPUT_RANGE_0__5V,
152 /* Range from 0 V to 10 V. Requires Rfb2x connection */
153 AD3552R_CH_OUTPUT_RANGE_0__10V,
154 /* Range from -5 V to 5 V. Requires Rfb2x connection */
155 AD3552R_CH_OUTPUT_RANGE_NEG_5__5V,
156 /* Range from -10 V to 10 V. Requires Rfb4x connection */
157 AD3552R_CH_OUTPUT_RANGE_NEG_10__10V,
158 };
159
160 static const s32 ad3552r_ch_ranges[][2] = {
161 [AD3552R_CH_OUTPUT_RANGE_0__2P5V] = {0, 2500},
162 [AD3552R_CH_OUTPUT_RANGE_0__5V] = {0, 5000},
163 [AD3552R_CH_OUTPUT_RANGE_0__10V] = {0, 10000},
164 [AD3552R_CH_OUTPUT_RANGE_NEG_5__5V] = {-5000, 5000},
165 [AD3552R_CH_OUTPUT_RANGE_NEG_10__10V] = {-10000, 10000}
166 };
167
168 enum ad3542r_ch_output_range {
169 /* Range from 0 V to 2.5 V. Requires Rfb1x connection */
170 AD3542R_CH_OUTPUT_RANGE_0__2P5V,
171 /* Range from 0 V to 3 V. Requires Rfb1x connection */
172 AD3542R_CH_OUTPUT_RANGE_0__3V,
173 /* Range from 0 V to 5 V. Requires Rfb1x connection */
174 AD3542R_CH_OUTPUT_RANGE_0__5V,
175 /* Range from 0 V to 10 V. Requires Rfb2x connection */
176 AD3542R_CH_OUTPUT_RANGE_0__10V,
177 /* Range from -2.5 V to 7.5 V. Requires Rfb2x connection */
178 AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V,
179 /* Range from -5 V to 5 V. Requires Rfb2x connection */
180 AD3542R_CH_OUTPUT_RANGE_NEG_5__5V,
181 };
182
183 static const s32 ad3542r_ch_ranges[][2] = {
184 [AD3542R_CH_OUTPUT_RANGE_0__2P5V] = {0, 2500},
185 [AD3542R_CH_OUTPUT_RANGE_0__3V] = {0, 3000},
186 [AD3542R_CH_OUTPUT_RANGE_0__5V] = {0, 5000},
187 [AD3542R_CH_OUTPUT_RANGE_0__10V] = {0, 10000},
188 [AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V] = {-2500, 7500},
189 [AD3542R_CH_OUTPUT_RANGE_NEG_5__5V] = {-5000, 5000}
190 };
191
192 enum ad3552r_ch_gain_scaling {
193 /* Gain scaling of 1 */
194 AD3552R_CH_GAIN_SCALING_1,
195 /* Gain scaling of 0.5 */
196 AD3552R_CH_GAIN_SCALING_0_5,
197 /* Gain scaling of 0.25 */
198 AD3552R_CH_GAIN_SCALING_0_25,
199 /* Gain scaling of 0.125 */
200 AD3552R_CH_GAIN_SCALING_0_125,
201 };
202
203 /* Gain * AD3552R_GAIN_SCALE */
204 static const s32 gains_scaling_table[] = {
205 [AD3552R_CH_GAIN_SCALING_1] = 1000,
206 [AD3552R_CH_GAIN_SCALING_0_5] = 500,
207 [AD3552R_CH_GAIN_SCALING_0_25] = 250,
208 [AD3552R_CH_GAIN_SCALING_0_125] = 125
209 };
210
211 enum ad3552r_dev_attributes {
212 /* - Direct register values */
213 /* From 0-3 */
214 AD3552R_SDO_DRIVE_STRENGTH,
215 /*
216 * 0 -> Internal Vref, vref_io pin floating (default)
217 * 1 -> Internal Vref, vref_io driven by internal vref
218 * 2 or 3 -> External Vref
219 */
220 AD3552R_VREF_SELECT,
221 /* Read registers in ascending order if set. Else descending */
222 AD3552R_ADDR_ASCENSION,
223 };
224
225 enum ad3552r_ch_attributes {
226 /* DAC powerdown */
227 AD3552R_CH_DAC_POWERDOWN,
228 /* DAC amplifier powerdown */
229 AD3552R_CH_AMPLIFIER_POWERDOWN,
230 /* Select the output range. Select from enum ad3552r_ch_output_range */
231 AD3552R_CH_OUTPUT_RANGE_SEL,
232 /*
233 * Over-rider the range selector in order to manually set the output
234 * voltage range
235 */
236 AD3552R_CH_RANGE_OVERRIDE,
237 /* Manually set the offset voltage */
238 AD3552R_CH_GAIN_OFFSET,
239 /* Sets the polarity of the offset. */
240 AD3552R_CH_GAIN_OFFSET_POLARITY,
241 /* PDAC gain scaling */
242 AD3552R_CH_GAIN_SCALING_P,
243 /* NDAC gain scaling */
244 AD3552R_CH_GAIN_SCALING_N,
245 /* Rfb value */
246 AD3552R_CH_RFB,
247 /* Channel select. When set allow Input -> DAC and Mask -> DAC */
248 AD3552R_CH_SELECT,
249 };
250
251 struct ad3552r_ch_data {
252 s32 scale_int;
253 s32 scale_dec;
254 s32 offset_int;
255 s32 offset_dec;
256 s16 gain_offset;
257 u16 rfb;
258 u8 n;
259 u8 p;
260 u8 range;
261 bool range_override;
262 };
263
264 struct ad3552r_desc {
265 /* Used to look the spi bus for atomic operations where needed */
266 struct mutex lock;
267 struct gpio_desc *gpio_reset;
268 struct gpio_desc *gpio_ldac;
269 struct spi_device *spi;
270 struct ad3552r_ch_data ch_data[AD3552R_NUM_CH];
271 struct iio_chan_spec channels[AD3552R_NUM_CH + 1];
272 unsigned long enabled_ch;
273 unsigned int num_ch;
274 enum ad3542r_id chip_id;
275 };
276
277 static const u16 addr_mask_map[][2] = {
278 [AD3552R_ADDR_ASCENSION] = {
279 AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
280 AD3552R_MASK_ADDR_ASCENSION
281 },
282 [AD3552R_SDO_DRIVE_STRENGTH] = {
283 AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
284 AD3552R_MASK_SDO_DRIVE_STRENGTH
285 },
286 [AD3552R_VREF_SELECT] = {
287 AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
288 AD3552R_MASK_REFERENCE_VOLTAGE_SEL
289 },
290 };
291
292 /* 0 -> reg addr, 1->ch0 mask, 2->ch1 mask */
293 static const u16 addr_mask_map_ch[][3] = {
294 [AD3552R_CH_DAC_POWERDOWN] = {
295 AD3552R_REG_ADDR_POWERDOWN_CONFIG,
296 AD3552R_MASK_CH_DAC_POWERDOWN(0),
297 AD3552R_MASK_CH_DAC_POWERDOWN(1)
298 },
299 [AD3552R_CH_AMPLIFIER_POWERDOWN] = {
300 AD3552R_REG_ADDR_POWERDOWN_CONFIG,
301 AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(0),
302 AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(1)
303 },
304 [AD3552R_CH_OUTPUT_RANGE_SEL] = {
305 AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE,
306 AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0),
307 AD3552R_MASK_CH_OUTPUT_RANGE_SEL(1)
308 },
309 [AD3552R_CH_SELECT] = {
310 AD3552R_REG_ADDR_CH_SELECT_16B,
311 AD3552R_MASK_CH(0),
312 AD3552R_MASK_CH(1)
313 }
314 };
315
_ad3552r_reg_len(u8 addr)316 static u8 _ad3552r_reg_len(u8 addr)
317 {
318 switch (addr) {
319 case AD3552R_REG_ADDR_HW_LDAC_16B:
320 case AD3552R_REG_ADDR_CH_SELECT_16B:
321 case AD3552R_REG_ADDR_SW_LDAC_16B:
322 case AD3552R_REG_ADDR_HW_LDAC_24B:
323 case AD3552R_REG_ADDR_CH_SELECT_24B:
324 case AD3552R_REG_ADDR_SW_LDAC_24B:
325 return 1;
326 default:
327 break;
328 }
329
330 if (addr > AD3552R_REG_ADDR_HW_LDAC_24B)
331 return 3;
332 if (addr > AD3552R_REG_ADDR_HW_LDAC_16B)
333 return 2;
334
335 return 1;
336 }
337
338 /* SPI transfer to device */
ad3552r_transfer(struct ad3552r_desc * dac,u8 addr,u32 len,u8 * data,bool is_read)339 static int ad3552r_transfer(struct ad3552r_desc *dac, u8 addr, u32 len,
340 u8 *data, bool is_read)
341 {
342 /* Maximum transfer: Addr (1B) + 2 * (Data Reg (3B)) + SW LDAC(1B) */
343 u8 buf[8];
344
345 buf[0] = addr & AD3552R_ADDR_MASK;
346 buf[0] |= is_read ? AD3552R_READ_BIT : 0;
347 if (is_read)
348 return spi_write_then_read(dac->spi, buf, 1, data, len);
349
350 memcpy(buf + 1, data, len);
351 return spi_write_then_read(dac->spi, buf, len + 1, NULL, 0);
352 }
353
ad3552r_write_reg(struct ad3552r_desc * dac,u8 addr,u16 val)354 static int ad3552r_write_reg(struct ad3552r_desc *dac, u8 addr, u16 val)
355 {
356 u8 reg_len;
357 u8 buf[AD3552R_MAX_REG_SIZE] = { 0 };
358
359 reg_len = _ad3552r_reg_len(addr);
360 if (reg_len == 2)
361 /* Only DAC register are 2 bytes wide */
362 val &= AD3552R_MASK_DAC_12B;
363 if (reg_len == 1)
364 buf[0] = val & 0xFF;
365 else
366 /* reg_len can be 2 or 3, but 3rd bytes needs to be set to 0 */
367 put_unaligned_be16(val, buf);
368
369 return ad3552r_transfer(dac, addr, reg_len, buf, false);
370 }
371
ad3552r_read_reg(struct ad3552r_desc * dac,u8 addr,u16 * val)372 static int ad3552r_read_reg(struct ad3552r_desc *dac, u8 addr, u16 *val)
373 {
374 int err;
375 u8 reg_len, buf[AD3552R_MAX_REG_SIZE] = { 0 };
376
377 reg_len = _ad3552r_reg_len(addr);
378 err = ad3552r_transfer(dac, addr, reg_len, buf, true);
379 if (err)
380 return err;
381
382 if (reg_len == 1)
383 *val = buf[0];
384 else
385 /* reg_len can be 2 or 3, but only first 2 bytes are relevant */
386 *val = get_unaligned_be16(buf);
387
388 return 0;
389 }
390
ad3552r_field_prep(u16 val,u16 mask)391 static u16 ad3552r_field_prep(u16 val, u16 mask)
392 {
393 return (val << __ffs(mask)) & mask;
394 }
395
396 /* Update field of a register, shift val if needed */
ad3552r_update_reg_field(struct ad3552r_desc * dac,u8 addr,u16 mask,u16 val)397 static int ad3552r_update_reg_field(struct ad3552r_desc *dac, u8 addr, u16 mask,
398 u16 val)
399 {
400 int ret;
401 u16 reg;
402
403 ret = ad3552r_read_reg(dac, addr, ®);
404 if (ret < 0)
405 return ret;
406
407 reg &= ~mask;
408 reg |= ad3552r_field_prep(val, mask);
409
410 return ad3552r_write_reg(dac, addr, reg);
411 }
412
ad3552r_set_ch_value(struct ad3552r_desc * dac,enum ad3552r_ch_attributes attr,u8 ch,u16 val)413 static int ad3552r_set_ch_value(struct ad3552r_desc *dac,
414 enum ad3552r_ch_attributes attr,
415 u8 ch,
416 u16 val)
417 {
418 /* Update register related to attributes in chip */
419 return ad3552r_update_reg_field(dac, addr_mask_map_ch[attr][0],
420 addr_mask_map_ch[attr][ch + 1], val);
421 }
422
423 #define AD3552R_CH_DAC(_idx) ((struct iio_chan_spec) { \
424 .type = IIO_VOLTAGE, \
425 .output = true, \
426 .indexed = true, \
427 .channel = _idx, \
428 .scan_index = _idx, \
429 .scan_type = { \
430 .sign = 'u', \
431 .realbits = 16, \
432 .storagebits = 16, \
433 .endianness = IIO_BE, \
434 }, \
435 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
436 BIT(IIO_CHAN_INFO_SCALE) | \
437 BIT(IIO_CHAN_INFO_ENABLE) | \
438 BIT(IIO_CHAN_INFO_OFFSET), \
439 })
440
ad3552r_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)441 static int ad3552r_read_raw(struct iio_dev *indio_dev,
442 struct iio_chan_spec const *chan,
443 int *val,
444 int *val2,
445 long mask)
446 {
447 struct ad3552r_desc *dac = iio_priv(indio_dev);
448 u16 tmp_val;
449 int err;
450 u8 ch = chan->channel;
451
452 switch (mask) {
453 case IIO_CHAN_INFO_RAW:
454 mutex_lock(&dac->lock);
455 err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_CH_DAC_24B(ch),
456 &tmp_val);
457 mutex_unlock(&dac->lock);
458 if (err < 0)
459 return err;
460 *val = tmp_val;
461 return IIO_VAL_INT;
462 case IIO_CHAN_INFO_ENABLE:
463 mutex_lock(&dac->lock);
464 err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_POWERDOWN_CONFIG,
465 &tmp_val);
466 mutex_unlock(&dac->lock);
467 if (err < 0)
468 return err;
469 *val = !((tmp_val & AD3552R_MASK_CH_DAC_POWERDOWN(ch)) >>
470 __ffs(AD3552R_MASK_CH_DAC_POWERDOWN(ch)));
471 return IIO_VAL_INT;
472 case IIO_CHAN_INFO_SCALE:
473 *val = dac->ch_data[ch].scale_int;
474 *val2 = dac->ch_data[ch].scale_dec;
475 return IIO_VAL_INT_PLUS_MICRO;
476 case IIO_CHAN_INFO_OFFSET:
477 *val = dac->ch_data[ch].offset_int;
478 *val2 = dac->ch_data[ch].offset_dec;
479 return IIO_VAL_INT_PLUS_MICRO;
480 default:
481 return -EINVAL;
482 }
483 }
484
ad3552r_write_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int val,int val2,long mask)485 static int ad3552r_write_raw(struct iio_dev *indio_dev,
486 struct iio_chan_spec const *chan,
487 int val,
488 int val2,
489 long mask)
490 {
491 struct ad3552r_desc *dac = iio_priv(indio_dev);
492 int err;
493
494 mutex_lock(&dac->lock);
495 switch (mask) {
496 case IIO_CHAN_INFO_RAW:
497 err = ad3552r_write_reg(dac,
498 AD3552R_REG_ADDR_CH_DAC_24B(chan->channel),
499 val);
500 break;
501 case IIO_CHAN_INFO_ENABLE:
502 err = ad3552r_set_ch_value(dac, AD3552R_CH_DAC_POWERDOWN,
503 chan->channel, !val);
504 break;
505 default:
506 err = -EINVAL;
507 break;
508 }
509 mutex_unlock(&dac->lock);
510
511 return err;
512 }
513
514 static const struct iio_info ad3552r_iio_info = {
515 .read_raw = ad3552r_read_raw,
516 .write_raw = ad3552r_write_raw
517 };
518
ad3552r_trigger_hw_ldac(struct gpio_desc * ldac)519 static int32_t ad3552r_trigger_hw_ldac(struct gpio_desc *ldac)
520 {
521 gpiod_set_value_cansleep(ldac, 0);
522 usleep_range(AD3552R_LDAC_PULSE_US, AD3552R_LDAC_PULSE_US + 10);
523 gpiod_set_value_cansleep(ldac, 1);
524
525 return 0;
526 }
527
ad3552r_write_all_channels(struct ad3552r_desc * dac,u8 * data)528 static int ad3552r_write_all_channels(struct ad3552r_desc *dac, u8 *data)
529 {
530 int err, len;
531 u8 addr, buff[AD3552R_NUM_CH * AD3552R_MAX_REG_SIZE + 1];
532
533 addr = AD3552R_REG_ADDR_CH_INPUT_24B(1);
534 /* CH1 */
535 memcpy(buff, data + 2, 2);
536 buff[2] = 0;
537 /* CH0 */
538 memcpy(buff + 3, data, 2);
539 buff[5] = 0;
540 len = 6;
541 if (!dac->gpio_ldac) {
542 /* Software LDAC */
543 buff[6] = AD3552R_MASK_ALL_CH;
544 ++len;
545 }
546 err = ad3552r_transfer(dac, addr, len, buff, false);
547 if (err)
548 return err;
549
550 if (dac->gpio_ldac)
551 return ad3552r_trigger_hw_ldac(dac->gpio_ldac);
552
553 return 0;
554 }
555
ad3552r_write_codes(struct ad3552r_desc * dac,u32 mask,u8 * data)556 static int ad3552r_write_codes(struct ad3552r_desc *dac, u32 mask, u8 *data)
557 {
558 int err;
559 u8 addr, buff[AD3552R_MAX_REG_SIZE];
560
561 if (mask == AD3552R_MASK_ALL_CH) {
562 if (memcmp(data, data + 2, 2) != 0)
563 return ad3552r_write_all_channels(dac, data);
564
565 addr = AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B;
566 } else {
567 addr = AD3552R_REG_ADDR_CH_INPUT_24B(__ffs(mask));
568 }
569
570 memcpy(buff, data, 2);
571 buff[2] = 0;
572 err = ad3552r_transfer(dac, addr, 3, data, false);
573 if (err)
574 return err;
575
576 if (dac->gpio_ldac)
577 return ad3552r_trigger_hw_ldac(dac->gpio_ldac);
578
579 return ad3552r_write_reg(dac, AD3552R_REG_ADDR_SW_LDAC_24B, mask);
580 }
581
ad3552r_trigger_handler(int irq,void * p)582 static irqreturn_t ad3552r_trigger_handler(int irq, void *p)
583 {
584 struct iio_poll_func *pf = p;
585 struct iio_dev *indio_dev = pf->indio_dev;
586 struct iio_buffer *buf = indio_dev->buffer;
587 struct ad3552r_desc *dac = iio_priv(indio_dev);
588 /* Maximum size of a scan */
589 u8 buff[AD3552R_NUM_CH * AD3552R_MAX_REG_SIZE];
590 int err;
591
592 memset(buff, 0, sizeof(buff));
593 err = iio_pop_from_buffer(buf, buff);
594 if (err)
595 goto end;
596
597 mutex_lock(&dac->lock);
598 ad3552r_write_codes(dac, *indio_dev->active_scan_mask, buff);
599 mutex_unlock(&dac->lock);
600 end:
601 iio_trigger_notify_done(indio_dev->trig);
602
603 return IRQ_HANDLED;
604 }
605
ad3552r_check_scratch_pad(struct ad3552r_desc * dac)606 static int ad3552r_check_scratch_pad(struct ad3552r_desc *dac)
607 {
608 const u16 val1 = AD3552R_SCRATCH_PAD_TEST_VAL1;
609 const u16 val2 = AD3552R_SCRATCH_PAD_TEST_VAL2;
610 u16 val;
611 int err;
612
613 err = ad3552r_write_reg(dac, AD3552R_REG_ADDR_SCRATCH_PAD, val1);
614 if (err < 0)
615 return err;
616
617 err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_SCRATCH_PAD, &val);
618 if (err < 0)
619 return err;
620
621 if (val1 != val)
622 return -ENODEV;
623
624 err = ad3552r_write_reg(dac, AD3552R_REG_ADDR_SCRATCH_PAD, val2);
625 if (err < 0)
626 return err;
627
628 err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_SCRATCH_PAD, &val);
629 if (err < 0)
630 return err;
631
632 if (val2 != val)
633 return -ENODEV;
634
635 return 0;
636 }
637
638 struct reg_addr_pool {
639 struct ad3552r_desc *dac;
640 u8 addr;
641 };
642
ad3552r_read_reg_wrapper(struct reg_addr_pool * addr)643 static int ad3552r_read_reg_wrapper(struct reg_addr_pool *addr)
644 {
645 int err;
646 u16 val;
647
648 err = ad3552r_read_reg(addr->dac, addr->addr, &val);
649 if (err)
650 return err;
651
652 return val;
653 }
654
ad3552r_reset(struct ad3552r_desc * dac)655 static int ad3552r_reset(struct ad3552r_desc *dac)
656 {
657 struct reg_addr_pool addr;
658 int ret;
659 int val;
660
661 dac->gpio_reset = devm_gpiod_get_optional(&dac->spi->dev, "reset",
662 GPIOD_OUT_LOW);
663 if (IS_ERR(dac->gpio_reset))
664 return dev_err_probe(&dac->spi->dev, PTR_ERR(dac->gpio_reset),
665 "Error while getting gpio reset");
666
667 if (dac->gpio_reset) {
668 /* Perform hardware reset */
669 usleep_range(10, 20);
670 gpiod_set_value_cansleep(dac->gpio_reset, 1);
671 } else {
672 /* Perform software reset if no GPIO provided */
673 ret = ad3552r_update_reg_field(dac,
674 AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
675 AD3552R_MASK_SOFTWARE_RESET,
676 AD3552R_MASK_SOFTWARE_RESET);
677 if (ret < 0)
678 return ret;
679
680 }
681
682 addr.dac = dac;
683 addr.addr = AD3552R_REG_ADDR_INTERFACE_CONFIG_B;
684 ret = readx_poll_timeout(ad3552r_read_reg_wrapper, &addr, val,
685 val == AD3552R_DEFAULT_CONFIG_B_VALUE ||
686 val < 0,
687 5000, 50000);
688 if (val < 0)
689 ret = val;
690 if (ret) {
691 dev_err(&dac->spi->dev, "Error while resetting");
692 return ret;
693 }
694
695 ret = readx_poll_timeout(ad3552r_read_reg_wrapper, &addr, val,
696 !(val & AD3552R_MASK_INTERFACE_NOT_READY) ||
697 val < 0,
698 5000, 50000);
699 if (val < 0)
700 ret = val;
701 if (ret) {
702 dev_err(&dac->spi->dev, "Error while resetting");
703 return ret;
704 }
705
706 return ad3552r_update_reg_field(dac,
707 addr_mask_map[AD3552R_ADDR_ASCENSION][0],
708 addr_mask_map[AD3552R_ADDR_ASCENSION][1],
709 val);
710 }
711
ad3552r_get_custom_range(struct ad3552r_desc * dac,s32 i,s32 * v_min,s32 * v_max)712 static void ad3552r_get_custom_range(struct ad3552r_desc *dac, s32 i, s32 *v_min,
713 s32 *v_max)
714 {
715 s64 vref, tmp, common, offset, gn, gp;
716 /*
717 * From datasheet formula (In Volts):
718 * Vmin = 2.5 + [(GainN + Offset / 1024) * 2.5 * Rfb * 1.03]
719 * Vmax = 2.5 - [(GainP + Offset / 1024) * 2.5 * Rfb * 1.03]
720 * Calculus are converted to milivolts
721 */
722 vref = 2500;
723 /* 2.5 * 1.03 * 1000 (To mV) */
724 common = 2575 * dac->ch_data[i].rfb;
725 offset = dac->ch_data[i].gain_offset;
726
727 gn = gains_scaling_table[dac->ch_data[i].n];
728 tmp = (1024 * gn + AD3552R_GAIN_SCALE * offset) * common;
729 tmp = div_s64(tmp, 1024 * AD3552R_GAIN_SCALE);
730 *v_max = vref + tmp;
731
732 gp = gains_scaling_table[dac->ch_data[i].p];
733 tmp = (1024 * gp - AD3552R_GAIN_SCALE * offset) * common;
734 tmp = div_s64(tmp, 1024 * AD3552R_GAIN_SCALE);
735 *v_min = vref - tmp;
736 }
737
ad3552r_calc_gain_and_offset(struct ad3552r_desc * dac,s32 ch)738 static void ad3552r_calc_gain_and_offset(struct ad3552r_desc *dac, s32 ch)
739 {
740 s32 idx, v_max, v_min, span, rem;
741 s64 tmp;
742
743 if (dac->ch_data[ch].range_override) {
744 ad3552r_get_custom_range(dac, ch, &v_min, &v_max);
745 } else {
746 /* Normal range */
747 idx = dac->ch_data[ch].range;
748 if (dac->chip_id == AD3542R_ID) {
749 v_min = ad3542r_ch_ranges[idx][0];
750 v_max = ad3542r_ch_ranges[idx][1];
751 } else {
752 v_min = ad3552r_ch_ranges[idx][0];
753 v_max = ad3552r_ch_ranges[idx][1];
754 }
755 }
756
757 /*
758 * From datasheet formula:
759 * Vout = Span * (D / 65536) + Vmin
760 * Converted to scale and offset:
761 * Scale = Span / 65536
762 * Offset = 65536 * Vmin / Span
763 *
764 * Reminders are in micros in order to be printed as
765 * IIO_VAL_INT_PLUS_MICRO
766 */
767 span = v_max - v_min;
768 dac->ch_data[ch].scale_int = div_s64_rem(span, 65536, &rem);
769 /* Do operations in microvolts */
770 dac->ch_data[ch].scale_dec = DIV_ROUND_CLOSEST((s64)rem * 1000000,
771 65536);
772
773 dac->ch_data[ch].offset_int = div_s64_rem(v_min * 65536, span, &rem);
774 tmp = (s64)rem * 1000000;
775 dac->ch_data[ch].offset_dec = div_s64(tmp, span);
776 }
777
ad3552r_find_range(u16 id,s32 * vals)778 static int ad3552r_find_range(u16 id, s32 *vals)
779 {
780 int i, len;
781 const s32 (*ranges)[2];
782
783 if (id == AD3542R_ID) {
784 len = ARRAY_SIZE(ad3542r_ch_ranges);
785 ranges = ad3542r_ch_ranges;
786 } else {
787 len = ARRAY_SIZE(ad3552r_ch_ranges);
788 ranges = ad3552r_ch_ranges;
789 }
790
791 for (i = 0; i < len; i++)
792 if (vals[0] == ranges[i][0] * 1000 &&
793 vals[1] == ranges[i][1] * 1000)
794 return i;
795
796 return -EINVAL;
797 }
798
ad3552r_configure_custom_gain(struct ad3552r_desc * dac,struct fwnode_handle * child,u32 ch)799 static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
800 struct fwnode_handle *child,
801 u32 ch)
802 {
803 struct device *dev = &dac->spi->dev;
804 struct fwnode_handle *gain_child;
805 u32 val;
806 int err;
807 u8 addr;
808 u16 reg = 0, offset;
809
810 gain_child = fwnode_get_named_child_node(child,
811 "custom-output-range-config");
812 if (!gain_child) {
813 dev_err(dev,
814 "mandatory custom-output-range-config property missing\n");
815 return -EINVAL;
816 }
817
818 dac->ch_data[ch].range_override = 1;
819 reg |= ad3552r_field_prep(1, AD3552R_MASK_CH_RANGE_OVERRIDE);
820
821 err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-p", &val);
822 if (err) {
823 dev_err(dev, "mandatory adi,gain-scaling-p property missing\n");
824 goto put_child;
825 }
826 reg |= ad3552r_field_prep(val, AD3552R_MASK_CH_GAIN_SCALING_P);
827 dac->ch_data[ch].p = val;
828
829 err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-n", &val);
830 if (err) {
831 dev_err(dev, "mandatory adi,gain-scaling-n property missing\n");
832 goto put_child;
833 }
834 reg |= ad3552r_field_prep(val, AD3552R_MASK_CH_GAIN_SCALING_N);
835 dac->ch_data[ch].n = val;
836
837 err = fwnode_property_read_u32(gain_child, "adi,rfb-ohms", &val);
838 if (err) {
839 dev_err(dev, "mandatory adi,rfb-ohms property missing\n");
840 goto put_child;
841 }
842 dac->ch_data[ch].rfb = val;
843
844 err = fwnode_property_read_u32(gain_child, "adi,gain-offset", &val);
845 if (err) {
846 dev_err(dev, "mandatory adi,gain-offset property missing\n");
847 goto put_child;
848 }
849 dac->ch_data[ch].gain_offset = val;
850
851 offset = abs((s32)val);
852 reg |= ad3552r_field_prep((offset >> 8), AD3552R_MASK_CH_OFFSET_BIT_8);
853
854 reg |= ad3552r_field_prep((s32)val < 0, AD3552R_MASK_CH_OFFSET_POLARITY);
855 addr = AD3552R_REG_ADDR_CH_GAIN(ch);
856 err = ad3552r_write_reg(dac, addr,
857 offset & AD3552R_MASK_CH_OFFSET_BITS_0_7);
858 if (err) {
859 dev_err(dev, "Error writing register\n");
860 goto put_child;
861 }
862
863 err = ad3552r_write_reg(dac, addr, reg);
864 if (err) {
865 dev_err(dev, "Error writing register\n");
866 goto put_child;
867 }
868
869 put_child:
870 fwnode_handle_put(gain_child);
871
872 return err;
873 }
874
ad3552r_reg_disable(void * reg)875 static void ad3552r_reg_disable(void *reg)
876 {
877 regulator_disable(reg);
878 }
879
ad3552r_configure_device(struct ad3552r_desc * dac)880 static int ad3552r_configure_device(struct ad3552r_desc *dac)
881 {
882 struct device *dev = &dac->spi->dev;
883 struct fwnode_handle *child;
884 struct regulator *vref;
885 int err, cnt = 0, voltage, delta = 100000;
886 u32 vals[2], val, ch;
887
888 dac->gpio_ldac = devm_gpiod_get_optional(dev, "ldac", GPIOD_OUT_HIGH);
889 if (IS_ERR(dac->gpio_ldac))
890 return dev_err_probe(dev, PTR_ERR(dac->gpio_ldac),
891 "Error getting gpio ldac");
892
893 vref = devm_regulator_get_optional(dev, "vref");
894 if (IS_ERR(vref)) {
895 if (PTR_ERR(vref) != -ENODEV)
896 return dev_err_probe(dev, PTR_ERR(vref),
897 "Error getting vref");
898
899 if (device_property_read_bool(dev, "adi,vref-out-en"))
900 val = AD3552R_INTERNAL_VREF_PIN_2P5V;
901 else
902 val = AD3552R_INTERNAL_VREF_PIN_FLOATING;
903 } else {
904 err = regulator_enable(vref);
905 if (err) {
906 dev_err(dev, "Failed to enable external vref supply\n");
907 return err;
908 }
909
910 err = devm_add_action_or_reset(dev, ad3552r_reg_disable, vref);
911 if (err) {
912 regulator_disable(vref);
913 return err;
914 }
915
916 voltage = regulator_get_voltage(vref);
917 if (voltage > 2500000 + delta || voltage < 2500000 - delta) {
918 dev_warn(dev, "vref-supply must be 2.5V");
919 return -EINVAL;
920 }
921 val = AD3552R_EXTERNAL_VREF_PIN_INPUT;
922 }
923
924 err = ad3552r_update_reg_field(dac,
925 addr_mask_map[AD3552R_VREF_SELECT][0],
926 addr_mask_map[AD3552R_VREF_SELECT][1],
927 val);
928 if (err)
929 return err;
930
931 err = device_property_read_u32(dev, "adi,sdo-drive-strength", &val);
932 if (!err) {
933 if (val > 3) {
934 dev_err(dev, "adi,sdo-drive-strength must be less than 4\n");
935 return -EINVAL;
936 }
937
938 err = ad3552r_update_reg_field(dac,
939 addr_mask_map[AD3552R_SDO_DRIVE_STRENGTH][0],
940 addr_mask_map[AD3552R_SDO_DRIVE_STRENGTH][1],
941 val);
942 if (err)
943 return err;
944 }
945
946 dac->num_ch = device_get_child_node_count(dev);
947 if (!dac->num_ch) {
948 dev_err(dev, "No channels defined\n");
949 return -ENODEV;
950 }
951
952 device_for_each_child_node(dev, child) {
953 err = fwnode_property_read_u32(child, "reg", &ch);
954 if (err) {
955 dev_err(dev, "mandatory reg property missing\n");
956 goto put_child;
957 }
958 if (ch >= AD3552R_NUM_CH) {
959 dev_err(dev, "reg must be less than %d\n",
960 AD3552R_NUM_CH);
961 err = -EINVAL;
962 goto put_child;
963 }
964
965 if (fwnode_property_present(child, "adi,output-range-microvolt")) {
966 err = fwnode_property_read_u32_array(child,
967 "adi,output-range-microvolt",
968 vals,
969 2);
970 if (err) {
971 dev_err(dev,
972 "adi,output-range-microvolt property could not be parsed\n");
973 goto put_child;
974 }
975
976 err = ad3552r_find_range(dac->chip_id, vals);
977 if (err < 0) {
978 dev_err(dev,
979 "Invalid adi,output-range-microvolt value\n");
980 goto put_child;
981 }
982 val = err;
983 err = ad3552r_set_ch_value(dac,
984 AD3552R_CH_OUTPUT_RANGE_SEL,
985 ch, val);
986 if (err)
987 goto put_child;
988
989 dac->ch_data[ch].range = val;
990 } else if (dac->chip_id == AD3542R_ID) {
991 dev_err(dev,
992 "adi,output-range-microvolt is required for ad3542r\n");
993 err = -EINVAL;
994 goto put_child;
995 } else {
996 err = ad3552r_configure_custom_gain(dac, child, ch);
997 if (err)
998 goto put_child;
999 }
1000
1001 ad3552r_calc_gain_and_offset(dac, ch);
1002 dac->enabled_ch |= BIT(ch);
1003
1004 err = ad3552r_set_ch_value(dac, AD3552R_CH_SELECT, ch, 1);
1005 if (err < 0)
1006 goto put_child;
1007
1008 dac->channels[cnt] = AD3552R_CH_DAC(ch);
1009 ++cnt;
1010
1011 }
1012
1013 /* Disable unused channels */
1014 for_each_clear_bit(ch, &dac->enabled_ch, AD3552R_NUM_CH) {
1015 err = ad3552r_set_ch_value(dac, AD3552R_CH_AMPLIFIER_POWERDOWN,
1016 ch, 1);
1017 if (err)
1018 return err;
1019 }
1020
1021 dac->num_ch = cnt;
1022
1023 return 0;
1024 put_child:
1025 fwnode_handle_put(child);
1026
1027 return err;
1028 }
1029
ad3552r_init(struct ad3552r_desc * dac)1030 static int ad3552r_init(struct ad3552r_desc *dac)
1031 {
1032 int err;
1033 u16 val, id;
1034
1035 err = ad3552r_reset(dac);
1036 if (err) {
1037 dev_err(&dac->spi->dev, "Reset failed\n");
1038 return err;
1039 }
1040
1041 err = ad3552r_check_scratch_pad(dac);
1042 if (err) {
1043 dev_err(&dac->spi->dev, "Scratch pad test failed\n");
1044 return err;
1045 }
1046
1047 err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_PRODUCT_ID_L, &val);
1048 if (err) {
1049 dev_err(&dac->spi->dev, "Fail read PRODUCT_ID_L\n");
1050 return err;
1051 }
1052
1053 id = val;
1054 err = ad3552r_read_reg(dac, AD3552R_REG_ADDR_PRODUCT_ID_H, &val);
1055 if (err) {
1056 dev_err(&dac->spi->dev, "Fail read PRODUCT_ID_H\n");
1057 return err;
1058 }
1059
1060 id |= val << 8;
1061 if (id != dac->chip_id) {
1062 dev_err(&dac->spi->dev, "Product id not matching\n");
1063 return -ENODEV;
1064 }
1065
1066 return ad3552r_configure_device(dac);
1067 }
1068
ad3552r_probe(struct spi_device * spi)1069 static int ad3552r_probe(struct spi_device *spi)
1070 {
1071 const struct spi_device_id *id = spi_get_device_id(spi);
1072 struct ad3552r_desc *dac;
1073 struct iio_dev *indio_dev;
1074 int err;
1075
1076 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*dac));
1077 if (!indio_dev)
1078 return -ENOMEM;
1079
1080 dac = iio_priv(indio_dev);
1081 dac->spi = spi;
1082 dac->chip_id = id->driver_data;
1083
1084 mutex_init(&dac->lock);
1085
1086 err = ad3552r_init(dac);
1087 if (err)
1088 return err;
1089
1090 /* Config triggered buffer device */
1091 if (dac->chip_id == AD3552R_ID)
1092 indio_dev->name = "ad3552r";
1093 else
1094 indio_dev->name = "ad3542r";
1095 indio_dev->dev.parent = &spi->dev;
1096 indio_dev->info = &ad3552r_iio_info;
1097 indio_dev->num_channels = dac->num_ch;
1098 indio_dev->channels = dac->channels;
1099 indio_dev->modes = INDIO_DIRECT_MODE;
1100
1101 err = devm_iio_triggered_buffer_setup_ext(&indio_dev->dev, indio_dev, NULL,
1102 &ad3552r_trigger_handler,
1103 IIO_BUFFER_DIRECTION_OUT,
1104 NULL,
1105 NULL);
1106 if (err)
1107 return err;
1108
1109 return devm_iio_device_register(&spi->dev, indio_dev);
1110 }
1111
1112 static const struct spi_device_id ad3552r_id[] = {
1113 { "ad3542r", AD3542R_ID },
1114 { "ad3552r", AD3552R_ID },
1115 { }
1116 };
1117 MODULE_DEVICE_TABLE(spi, ad3552r_id);
1118
1119 static const struct of_device_id ad3552r_of_match[] = {
1120 { .compatible = "adi,ad3542r"},
1121 { .compatible = "adi,ad3552r"},
1122 { }
1123 };
1124 MODULE_DEVICE_TABLE(of, ad3552r_of_match);
1125
1126 static struct spi_driver ad3552r_driver = {
1127 .driver = {
1128 .name = "ad3552r",
1129 .of_match_table = ad3552r_of_match,
1130 },
1131 .probe = ad3552r_probe,
1132 .id_table = ad3552r_id
1133 };
1134 module_spi_driver(ad3552r_driver);
1135
1136 MODULE_AUTHOR("Mihail Chindris <mihail.chindris@analog.com>");
1137 MODULE_DESCRIPTION("Analog Device AD3552R DAC");
1138 MODULE_LICENSE("GPL v2");
1139