1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved. 4 */ 5 6 #ifndef __SSP_SENSORHUB_H__ 7 #define __SSP_SENSORHUB_H__ 8 9 #include <linux/delay.h> 10 #include <linux/gpio.h> 11 #include <linux/iio/common/ssp_sensors.h> 12 #include <linux/iio/iio.h> 13 #include <linux/spi/spi.h> 14 15 #define SSP_DEVICE_ID 0x55 16 17 #ifdef SSP_DBG 18 #define ssp_dbg(format, ...) pr_info("[SSP] "format, ##__VA_ARGS__) 19 #else 20 #define ssp_dbg(format, ...) 21 #endif 22 23 #define SSP_SW_RESET_TIME 3000 24 /* Sensor polling in ms */ 25 #define SSP_DEFAULT_POLLING_DELAY 200 26 #define SSP_DEFAULT_RETRIES 3 27 #define SSP_DATA_PACKET_SIZE 960 28 #define SSP_HEADER_BUFFER_SIZE 4 29 30 enum { 31 SSP_KERNEL_BINARY = 0, 32 SSP_KERNEL_CRASHED_BINARY, 33 }; 34 35 enum { 36 SSP_INITIALIZATION_STATE = 0, 37 SSP_NO_SENSOR_STATE, 38 SSP_ADD_SENSOR_STATE, 39 SSP_RUNNING_SENSOR_STATE, 40 }; 41 42 /* Firmware download STATE */ 43 enum { 44 SSP_FW_DL_STATE_FAIL = -1, 45 SSP_FW_DL_STATE_NONE = 0, 46 SSP_FW_DL_STATE_NEED_TO_SCHEDULE, 47 SSP_FW_DL_STATE_SCHEDULED, 48 SSP_FW_DL_STATE_DOWNLOADING, 49 SSP_FW_DL_STATE_SYNC, 50 SSP_FW_DL_STATE_DONE, 51 }; 52 53 #define SSP_INVALID_REVISION 99999 54 #define SSP_INVALID_REVISION2 0xffffff 55 56 /* AP -> SSP Instruction */ 57 #define SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD 0xa1 58 #define SSP_MSG2SSP_INST_BYPASS_SENSOR_RM 0xa2 59 #define SSP_MSG2SSP_INST_REMOVE_ALL 0xa3 60 #define SSP_MSG2SSP_INST_CHANGE_DELAY 0xa4 61 #define SSP_MSG2SSP_INST_LIBRARY_ADD 0xb1 62 #define SSP_MSG2SSP_INST_LIBRARY_REMOVE 0xb2 63 #define SSP_MSG2SSP_INST_LIB_NOTI 0xb4 64 #define SSP_MSG2SSP_INST_LIB_DATA 0xc1 65 66 #define SSP_MSG2SSP_AP_MCU_SET_GYRO_CAL 0xcd 67 #define SSP_MSG2SSP_AP_MCU_SET_ACCEL_CAL 0xce 68 #define SSP_MSG2SSP_AP_STATUS_SHUTDOWN 0xd0 69 #define SSP_MSG2SSP_AP_STATUS_WAKEUP 0xd1 70 #define SSP_MSG2SSP_AP_STATUS_SLEEP 0xd2 71 #define SSP_MSG2SSP_AP_STATUS_RESUME 0xd3 72 #define SSP_MSG2SSP_AP_STATUS_SUSPEND 0xd4 73 #define SSP_MSG2SSP_AP_STATUS_RESET 0xd5 74 #define SSP_MSG2SSP_AP_STATUS_POW_CONNECTED 0xd6 75 #define SSP_MSG2SSP_AP_STATUS_POW_DISCONNECTED 0xd7 76 #define SSP_MSG2SSP_AP_TEMPHUMIDITY_CAL_DONE 0xda 77 #define SSP_MSG2SSP_AP_MCU_SET_DUMPMODE 0xdb 78 #define SSP_MSG2SSP_AP_MCU_DUMP_CHECK 0xdc 79 #define SSP_MSG2SSP_AP_MCU_BATCH_FLUSH 0xdd 80 #define SSP_MSG2SSP_AP_MCU_BATCH_COUNT 0xdf 81 82 #define SSP_MSG2SSP_AP_WHOAMI 0x0f 83 #define SSP_MSG2SSP_AP_FIRMWARE_REV 0xf0 84 #define SSP_MSG2SSP_AP_SENSOR_FORMATION 0xf1 85 #define SSP_MSG2SSP_AP_SENSOR_PROXTHRESHOLD 0xf2 86 #define SSP_MSG2SSP_AP_SENSOR_BARCODE_EMUL 0xf3 87 #define SSP_MSG2SSP_AP_SENSOR_SCANNING 0xf4 88 #define SSP_MSG2SSP_AP_SET_MAGNETIC_HWOFFSET 0xf5 89 #define SSP_MSG2SSP_AP_GET_MAGNETIC_HWOFFSET 0xf6 90 #define SSP_MSG2SSP_AP_SENSOR_GESTURE_CURRENT 0xf7 91 #define SSP_MSG2SSP_AP_GET_THERM 0xf8 92 #define SSP_MSG2SSP_AP_GET_BIG_DATA 0xf9 93 #define SSP_MSG2SSP_AP_SET_BIG_DATA 0xfa 94 #define SSP_MSG2SSP_AP_START_BIG_DATA 0xfb 95 #define SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX 0xfd 96 #define SSP_MSG2SSP_AP_SENSOR_TILT 0xea 97 #define SSP_MSG2SSP_AP_MCU_SET_TIME 0xfe 98 #define SSP_MSG2SSP_AP_MCU_GET_TIME 0xff 99 100 #define SSP_MSG2SSP_AP_FUSEROM 0x01 101 102 /* voice data */ 103 #define SSP_TYPE_WAKE_UP_VOICE_SERVICE 0x01 104 #define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_AM 0x01 105 #define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_GRAMMER 0x02 106 107 /* Factory Test */ 108 #define SSP_ACCELEROMETER_FACTORY 0x80 109 #define SSP_GYROSCOPE_FACTORY 0x81 110 #define SSP_GEOMAGNETIC_FACTORY 0x82 111 #define SSP_PRESSURE_FACTORY 0x85 112 #define SSP_GESTURE_FACTORY 0x86 113 #define SSP_TEMPHUMIDITY_CRC_FACTORY 0x88 114 #define SSP_GYROSCOPE_TEMP_FACTORY 0x8a 115 #define SSP_GYROSCOPE_DPS_FACTORY 0x8b 116 #define SSP_MCU_FACTORY 0x8c 117 #define SSP_MCU_SLEEP_FACTORY 0x8d 118 119 /* SSP -> AP ACK about write CMD */ 120 #define SSP_MSG_ACK 0x80 /* ACK from SSP to AP */ 121 #define SSP_MSG_NAK 0x70 /* NAK from SSP to AP */ 122 123 struct ssp_sensorhub_info { 124 char *fw_name; 125 char *fw_crashed_name; 126 unsigned int fw_rev; 127 const u8 * const mag_table; 128 const unsigned int mag_length; 129 }; 130 131 /* ssp_msg options bit */ 132 #define SSP_RW 0 133 #define SSP_INDEX 3 134 135 #define SSP_AP2HUB_READ 0 136 #define SSP_AP2HUB_WRITE 1 137 #define SSP_HUB2AP_WRITE 2 138 #define SSP_AP2HUB_READY 3 139 #define SSP_AP2HUB_RETURN 4 140 141 /** 142 * struct ssp_data - ssp platformdata structure 143 * @spi: spi device 144 * @sensorhub_info: info about sensorhub board specific features 145 * @wdt_timer: watchdog timer 146 * @work_wdt: watchdog work 147 * @work_firmware: firmware upgrade work queue 148 * @work_refresh: refresh work queue for reset request from MCU 149 * @shut_down: shut down flag 150 * @mcu_dump_mode: mcu dump mode for debug 151 * @time_syncing: time syncing indication flag 152 * @timestamp: previous time in ns calculated for time syncing 153 * @check_status: status table for each sensor 154 * @com_fail_cnt: communication fail count 155 * @reset_cnt: reset count 156 * @timeout_cnt: timeout count 157 * @available_sensors: available sensors seen by sensorhub (bit array) 158 * @cur_firm_rev: cached current firmware revision 159 * @last_resume_state: last AP resume/suspend state used to handle the PM 160 * state of ssp 161 * @last_ap_state: (obsolete) sleep notification for MCU 162 * @sensor_enable: sensor enable mask 163 * @delay_buf: data acquisition intervals table 164 * @batch_latency_buf: yet unknown but existing in communication protocol 165 * @batch_opt_buf: yet unknown but existing in communication protocol 166 * @accel_position: yet unknown but existing in communication protocol 167 * @mag_position: yet unknown but existing in communication protocol 168 * @fw_dl_state: firmware download state 169 * @comm_lock: lock protecting the handshake 170 * @pending_lock: lock protecting pending list and completion 171 * @mcu_reset_gpio: mcu reset line 172 * @ap_mcu_gpio: ap to mcu gpio line 173 * @mcu_ap_gpio: mcu to ap gpio line 174 * @pending_list: pending list for messages queued to be sent/read 175 * @sensor_devs: registered IIO devices table 176 * @enable_refcount: enable reference count for wdt (watchdog timer) 177 * @header_buffer: cache aligned buffer for packet header 178 */ 179 struct ssp_data { 180 struct spi_device *spi; 181 const struct ssp_sensorhub_info *sensorhub_info; 182 struct timer_list wdt_timer; 183 struct work_struct work_wdt; 184 struct delayed_work work_refresh; 185 186 bool shut_down; 187 bool mcu_dump_mode; 188 bool time_syncing; 189 int64_t timestamp; 190 191 int check_status[SSP_SENSOR_MAX]; 192 193 unsigned int com_fail_cnt; 194 unsigned int reset_cnt; 195 unsigned int timeout_cnt; 196 197 unsigned int available_sensors; 198 unsigned int cur_firm_rev; 199 200 char last_resume_state; 201 char last_ap_state; 202 203 unsigned int sensor_enable; 204 u32 delay_buf[SSP_SENSOR_MAX]; 205 s32 batch_latency_buf[SSP_SENSOR_MAX]; 206 s8 batch_opt_buf[SSP_SENSOR_MAX]; 207 208 int accel_position; 209 int mag_position; 210 int fw_dl_state; 211 212 struct mutex comm_lock; 213 struct mutex pending_lock; 214 215 int mcu_reset_gpio; 216 int ap_mcu_gpio; 217 int mcu_ap_gpio; 218 219 struct list_head pending_list; 220 221 struct iio_dev *sensor_devs[SSP_SENSOR_MAX]; 222 atomic_t enable_refcount; 223 224 __le16 header_buffer[SSP_HEADER_BUFFER_SIZE / sizeof(__le16)] 225 ____cacheline_aligned; 226 }; 227 228 void ssp_clean_pending_list(struct ssp_data *data); 229 230 int ssp_command(struct ssp_data *data, char command, int arg); 231 232 int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type, 233 u8 *send_buf, u8 length); 234 235 int ssp_irq_msg(struct ssp_data *data); 236 237 int ssp_get_chipid(struct ssp_data *data); 238 239 int ssp_set_magnetic_matrix(struct ssp_data *data); 240 241 unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data); 242 243 unsigned int ssp_get_firmware_rev(struct ssp_data *data); 244 245 int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay); 246 247 #endif /* __SSP_SENSORHUB_H__ */ 248