xref: /openbmc/linux/drivers/iio/chemical/bme680.h (revision b4e18b29)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef BME680_H_
3 #define BME680_H_
4 
5 #define BME680_REG_CHIP_ID			0xD0
6 #define   BME680_CHIP_ID_VAL			0x61
7 #define BME680_REG_SOFT_RESET			0xE0
8 #define   BME680_CMD_SOFTRESET			0xB6
9 #define BME680_REG_STATUS			0x73
10 #define   BME680_SPI_MEM_PAGE_BIT		BIT(4)
11 #define     BME680_SPI_MEM_PAGE_1_VAL		1
12 
13 #define BME680_REG_TEMP_MSB			0x22
14 #define BME680_REG_PRESS_MSB			0x1F
15 #define BM6880_REG_HUMIDITY_MSB			0x25
16 #define BME680_REG_GAS_MSB			0x2A
17 #define BME680_REG_GAS_R_LSB			0x2B
18 #define   BME680_GAS_STAB_BIT			BIT(4)
19 #define   BME680_GAS_RANGE_MASK			GENMASK(3, 0)
20 
21 #define BME680_REG_CTRL_HUMIDITY		0x72
22 #define   BME680_OSRS_HUMIDITY_MASK		GENMASK(2, 0)
23 
24 #define BME680_REG_CTRL_MEAS			0x74
25 #define   BME680_OSRS_TEMP_MASK			GENMASK(7, 5)
26 #define   BME680_OSRS_PRESS_MASK		GENMASK(4, 2)
27 #define   BME680_MODE_MASK			GENMASK(1, 0)
28 #define     BME680_MODE_FORCED			1
29 #define     BME680_MODE_SLEEP			0
30 
31 #define BME680_REG_CONFIG			0x75
32 #define   BME680_FILTER_MASK			GENMASK(4, 2)
33 #define     BME680_FILTER_COEFF_VAL		BIT(1)
34 
35 /* TEMP/PRESS/HUMID reading skipped */
36 #define BME680_MEAS_SKIPPED			0x8000
37 
38 #define BME680_MAX_OVERFLOW_VAL			0x40000000
39 #define BME680_HUM_REG_SHIFT_VAL		4
40 #define BME680_BIT_H1_DATA_MASK			GENMASK(3, 0)
41 
42 #define BME680_REG_RES_HEAT_RANGE		0x02
43 #define   BME680_RHRANGE_MASK			GENMASK(5, 4)
44 #define BME680_REG_RES_HEAT_VAL			0x00
45 #define BME680_REG_RANGE_SW_ERR			0x04
46 #define   BME680_RSERROR_MASK			GENMASK(7, 4)
47 #define BME680_REG_RES_HEAT_0			0x5A
48 #define BME680_REG_GAS_WAIT_0			0x64
49 #define BME680_ADC_GAS_RES_SHIFT		6
50 #define BME680_AMB_TEMP				25
51 
52 #define BME680_REG_CTRL_GAS_1			0x71
53 #define   BME680_RUN_GAS_MASK			BIT(4)
54 #define   BME680_NB_CONV_MASK			GENMASK(3, 0)
55 
56 #define BME680_REG_MEAS_STAT_0			0x1D
57 #define   BME680_GAS_MEAS_BIT			BIT(6)
58 
59 /* Calibration Parameters */
60 #define BME680_T2_LSB_REG	0x8A
61 #define BME680_T3_REG		0x8C
62 #define BME680_P1_LSB_REG	0x8E
63 #define BME680_P2_LSB_REG	0x90
64 #define BME680_P3_REG		0x92
65 #define BME680_P4_LSB_REG	0x94
66 #define BME680_P5_LSB_REG	0x96
67 #define BME680_P7_REG		0x98
68 #define BME680_P6_REG		0x99
69 #define BME680_P8_LSB_REG	0x9C
70 #define BME680_P9_LSB_REG	0x9E
71 #define BME680_P10_REG		0xA0
72 #define BME680_H2_LSB_REG	0xE2
73 #define BME680_H2_MSB_REG	0xE1
74 #define BME680_H1_MSB_REG	0xE3
75 #define BME680_H1_LSB_REG	0xE2
76 #define BME680_H3_REG		0xE4
77 #define BME680_H4_REG		0xE5
78 #define BME680_H5_REG		0xE6
79 #define BME680_H6_REG		0xE7
80 #define BME680_H7_REG		0xE8
81 #define BME680_T1_LSB_REG	0xE9
82 #define BME680_GH2_LSB_REG	0xEB
83 #define BME680_GH1_REG		0xED
84 #define BME680_GH3_REG		0xEE
85 
86 extern const struct regmap_config bme680_regmap_config;
87 
88 int bme680_core_probe(struct device *dev, struct regmap *regmap,
89 		      const char *name);
90 
91 #endif  /* BME680_H_ */
92