1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * ADA4250 driver
4 *
5 * Copyright 2022 Analog Devices Inc.
6 */
7
8 #include <linux/bitfield.h>
9 #include <linux/bits.h>
10 #include <linux/device.h>
11 #include <linux/iio/iio.h>
12 #include <linux/module.h>
13 #include <linux/regmap.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/spi/spi.h>
16
17 #include <asm/unaligned.h>
18
19 /* ADA4250 Register Map */
20 #define ADA4250_REG_GAIN_MUX 0x00
21 #define ADA4250_REG_REFBUF_EN 0x01
22 #define ADA4250_REG_RESET 0x02
23 #define ADA4250_REG_SNSR_CAL_VAL 0x04
24 #define ADA4250_REG_SNSR_CAL_CNFG 0x05
25 #define ADA4250_REG_DIE_REV 0x18
26 #define ADA4250_REG_CHIP_ID 0x19
27
28 /* ADA4250_REG_GAIN_MUX Map */
29 #define ADA4250_GAIN_MUX_MSK GENMASK(2, 0)
30
31 /* ADA4250_REG_REFBUF Map */
32 #define ADA4250_REFBUF_MSK BIT(0)
33
34 /* ADA4250_REG_RESET Map */
35 #define ADA4250_RESET_MSK BIT(0)
36
37 /* ADA4250_REG_SNSR_CAL_VAL Map */
38 #define ADA4250_CAL_CFG_BIAS_MSK GENMASK(7, 0)
39
40 /* ADA4250_REG_SNSR_CAL_CNFG Bit Definition */
41 #define ADA4250_BIAS_SET_MSK GENMASK(3, 2)
42 #define ADA4250_RANGE_SET_MSK GENMASK(1, 0)
43
44 /* Miscellaneous definitions */
45 #define ADA4250_CHIP_ID 0x4250
46 #define ADA4250_RANGE1 0
47 #define ADA4250_RANGE4 3
48
49 /* ADA4250 current bias set */
50 enum ada4250_current_bias {
51 ADA4250_BIAS_DISABLED,
52 ADA4250_BIAS_BANDGAP,
53 ADA4250_BIAS_AVDD,
54 };
55
56 struct ada4250_state {
57 struct spi_device *spi;
58 struct regmap *regmap;
59 struct regulator *reg;
60 /* Protect against concurrent accesses to the device and data content */
61 struct mutex lock;
62 u8 bias;
63 u8 gain;
64 int offset_uv;
65 bool refbuf_en;
66 };
67
68 /* ADA4250 Current Bias Source Settings: Disabled, Bandgap Reference, AVDD */
69 static const int calibbias_table[] = {0, 1, 2};
70
71 /* ADA4250 Gain (V/V) values: 1, 2, 4, 8, 16, 32, 64, 128 */
72 static const int hwgain_table[] = {1, 2, 4, 8, 16, 32, 64, 128};
73
74 static const struct regmap_config ada4250_regmap_config = {
75 .reg_bits = 8,
76 .val_bits = 8,
77 .read_flag_mask = BIT(7),
78 .max_register = 0x1A,
79 };
80
ada4250_set_offset_uv(struct iio_dev * indio_dev,const struct iio_chan_spec * chan,int offset_uv)81 static int ada4250_set_offset_uv(struct iio_dev *indio_dev,
82 const struct iio_chan_spec *chan,
83 int offset_uv)
84 {
85 struct ada4250_state *st = iio_priv(indio_dev);
86
87 int i, ret, x[8], max_vos, min_vos, voltage_v, vlsb = 0;
88 u8 offset_raw, range = ADA4250_RANGE1;
89 u32 lsb_coeff[6] = {1333, 2301, 4283, 8289, 16311, 31599};
90
91 if (st->bias == 0 || st->bias == 3)
92 return -EINVAL;
93
94 voltage_v = regulator_get_voltage(st->reg);
95 voltage_v = DIV_ROUND_CLOSEST(voltage_v, 1000000);
96
97 if (st->bias == ADA4250_BIAS_AVDD)
98 x[0] = voltage_v;
99 else
100 x[0] = 5;
101
102 x[1] = 126 * (x[0] - 1);
103
104 for (i = 0; i < 6; i++)
105 x[i + 2] = DIV_ROUND_CLOSEST(x[1] * 1000, lsb_coeff[i]);
106
107 if (st->gain == 0)
108 return -EINVAL;
109
110 /*
111 * Compute Range and Voltage per LSB for the Sensor Offset Calibration
112 * Example of computation for Range 1 and Range 2 (Curren Bias Set = AVDD):
113 * Range 1 Range 2
114 * Gain | Max Vos(mV) | LSB(mV) | Max Vos(mV) | LSB(mV) |
115 * 2 | X1*127 | X1=0.126(AVDD-1) | X1*3*127 | X1*3 |
116 * 4 | X2*127 | X2=X1/1.3333 | X2*3*127 | X2*3 |
117 * 8 | X3*127 | X3=X1/2.301 | X3*3*127 | X3*3 |
118 * 16 | X4*127 | X4=X1/4.283 | X4*3*127 | X4*3 |
119 * 32 | X5*127 | X5=X1/8.289 | X5*3*127 | X5*3 |
120 * 64 | X6*127 | X6=X1/16.311 | X6*3*127 | X6*3 |
121 * 128 | X7*127 | X7=X1/31.599 | X7*3*127 | X7*3 |
122 */
123 for (i = ADA4250_RANGE1; i <= ADA4250_RANGE4; i++) {
124 max_vos = x[st->gain] * 127 * ((1 << (i + 1)) - 1);
125 min_vos = -1 * max_vos;
126 if (offset_uv > min_vos && offset_uv < max_vos) {
127 range = i;
128 vlsb = x[st->gain] * ((1 << (i + 1)) - 1);
129 break;
130 }
131 }
132
133 if (vlsb <= 0)
134 return -EINVAL;
135
136 offset_raw = DIV_ROUND_CLOSEST(abs(offset_uv), vlsb);
137
138 mutex_lock(&st->lock);
139 ret = regmap_update_bits(st->regmap, ADA4250_REG_SNSR_CAL_CNFG,
140 ADA4250_RANGE_SET_MSK,
141 FIELD_PREP(ADA4250_RANGE_SET_MSK, range));
142 if (ret)
143 goto exit;
144
145 st->offset_uv = offset_raw * vlsb;
146
147 /*
148 * To set the offset calibration value, use bits [6:0] and bit 7 as the
149 * polarity bit (set to "0" for a negative offset and "1" for a positive
150 * offset).
151 */
152 if (offset_uv < 0) {
153 offset_raw |= BIT(7);
154 st->offset_uv *= (-1);
155 }
156
157 ret = regmap_write(st->regmap, ADA4250_REG_SNSR_CAL_VAL, offset_raw);
158
159 exit:
160 mutex_unlock(&st->lock);
161
162 return ret;
163 }
164
ada4250_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long info)165 static int ada4250_read_raw(struct iio_dev *indio_dev,
166 struct iio_chan_spec const *chan,
167 int *val, int *val2, long info)
168 {
169 struct ada4250_state *st = iio_priv(indio_dev);
170 int ret;
171
172 switch (info) {
173 case IIO_CHAN_INFO_HARDWAREGAIN:
174 ret = regmap_read(st->regmap, ADA4250_REG_GAIN_MUX, val);
175 if (ret)
176 return ret;
177
178 *val = BIT(*val);
179
180 return IIO_VAL_INT;
181 case IIO_CHAN_INFO_OFFSET:
182 *val = st->offset_uv;
183
184 return IIO_VAL_INT;
185 case IIO_CHAN_INFO_CALIBBIAS:
186 ret = regmap_read(st->regmap, ADA4250_REG_SNSR_CAL_CNFG, val);
187 if (ret)
188 return ret;
189
190 *val = FIELD_GET(ADA4250_BIAS_SET_MSK, *val);
191
192 return IIO_VAL_INT;
193 case IIO_CHAN_INFO_SCALE:
194 *val = 1;
195 *val2 = 1000000;
196
197 return IIO_VAL_FRACTIONAL;
198 default:
199 return -EINVAL;
200 }
201 }
202
ada4250_write_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int val,int val2,long info)203 static int ada4250_write_raw(struct iio_dev *indio_dev,
204 struct iio_chan_spec const *chan,
205 int val, int val2, long info)
206 {
207 struct ada4250_state *st = iio_priv(indio_dev);
208 int ret;
209
210 switch (info) {
211 case IIO_CHAN_INFO_HARDWAREGAIN:
212 ret = regmap_write(st->regmap, ADA4250_REG_GAIN_MUX,
213 FIELD_PREP(ADA4250_GAIN_MUX_MSK, ilog2(val)));
214 if (ret)
215 return ret;
216
217 st->gain = ilog2(val);
218
219 return ret;
220 case IIO_CHAN_INFO_OFFSET:
221 return ada4250_set_offset_uv(indio_dev, chan, val);
222 case IIO_CHAN_INFO_CALIBBIAS:
223 ret = regmap_update_bits(st->regmap, ADA4250_REG_SNSR_CAL_CNFG,
224 ADA4250_BIAS_SET_MSK,
225 FIELD_PREP(ADA4250_BIAS_SET_MSK, val));
226 if (ret)
227 return ret;
228
229 st->bias = val;
230
231 return ret;
232 default:
233 return -EINVAL;
234 }
235 }
236
ada4250_read_avail(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,const int ** vals,int * type,int * length,long mask)237 static int ada4250_read_avail(struct iio_dev *indio_dev,
238 struct iio_chan_spec const *chan,
239 const int **vals, int *type, int *length,
240 long mask)
241 {
242 switch (mask) {
243 case IIO_CHAN_INFO_CALIBBIAS:
244 *vals = calibbias_table;
245 *type = IIO_VAL_INT;
246 *length = ARRAY_SIZE(calibbias_table);
247
248 return IIO_AVAIL_LIST;
249 case IIO_CHAN_INFO_HARDWAREGAIN:
250 *vals = hwgain_table;
251 *type = IIO_VAL_INT;
252 *length = ARRAY_SIZE(hwgain_table);
253
254 return IIO_AVAIL_LIST;
255 default:
256 return -EINVAL;
257 }
258 }
259
ada4250_reg_access(struct iio_dev * indio_dev,unsigned int reg,unsigned int write_val,unsigned int * read_val)260 static int ada4250_reg_access(struct iio_dev *indio_dev,
261 unsigned int reg,
262 unsigned int write_val,
263 unsigned int *read_val)
264 {
265 struct ada4250_state *st = iio_priv(indio_dev);
266
267 if (read_val)
268 return regmap_read(st->regmap, reg, read_val);
269 else
270 return regmap_write(st->regmap, reg, write_val);
271 }
272
273 static const struct iio_info ada4250_info = {
274 .read_raw = ada4250_read_raw,
275 .write_raw = ada4250_write_raw,
276 .read_avail = &ada4250_read_avail,
277 .debugfs_reg_access = &ada4250_reg_access,
278 };
279
280 static const struct iio_chan_spec ada4250_channels[] = {
281 {
282 .type = IIO_VOLTAGE,
283 .output = 1,
284 .indexed = 1,
285 .channel = 0,
286 .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN) |
287 BIT(IIO_CHAN_INFO_OFFSET) |
288 BIT(IIO_CHAN_INFO_CALIBBIAS) |
289 BIT(IIO_CHAN_INFO_SCALE),
290 .info_mask_separate_available = BIT(IIO_CHAN_INFO_CALIBBIAS) |
291 BIT(IIO_CHAN_INFO_HARDWAREGAIN),
292 }
293 };
294
ada4250_reg_disable(void * data)295 static void ada4250_reg_disable(void *data)
296 {
297 regulator_disable(data);
298 }
299
ada4250_init(struct ada4250_state * st)300 static int ada4250_init(struct ada4250_state *st)
301 {
302 int ret;
303 u16 chip_id;
304 u8 data[2] __aligned(8) = {};
305 struct spi_device *spi = st->spi;
306
307 st->refbuf_en = device_property_read_bool(&spi->dev, "adi,refbuf-enable");
308
309 st->reg = devm_regulator_get(&spi->dev, "avdd");
310 if (IS_ERR(st->reg))
311 return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
312 "failed to get the AVDD voltage\n");
313
314 ret = regulator_enable(st->reg);
315 if (ret) {
316 dev_err(&spi->dev, "Failed to enable specified AVDD supply\n");
317 return ret;
318 }
319
320 ret = devm_add_action_or_reset(&spi->dev, ada4250_reg_disable, st->reg);
321 if (ret)
322 return ret;
323
324 ret = regmap_write(st->regmap, ADA4250_REG_RESET,
325 FIELD_PREP(ADA4250_RESET_MSK, 1));
326 if (ret)
327 return ret;
328
329 ret = regmap_bulk_read(st->regmap, ADA4250_REG_CHIP_ID, data, 2);
330 if (ret)
331 return ret;
332
333 chip_id = get_unaligned_le16(data);
334
335 if (chip_id != ADA4250_CHIP_ID) {
336 dev_err(&spi->dev, "Invalid chip ID.\n");
337 return -EINVAL;
338 }
339
340 return regmap_write(st->regmap, ADA4250_REG_REFBUF_EN,
341 FIELD_PREP(ADA4250_REFBUF_MSK, st->refbuf_en));
342 }
343
ada4250_probe(struct spi_device * spi)344 static int ada4250_probe(struct spi_device *spi)
345 {
346 struct iio_dev *indio_dev;
347 struct regmap *regmap;
348 struct ada4250_state *st;
349 int ret;
350
351 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
352 if (!indio_dev)
353 return -ENOMEM;
354
355 regmap = devm_regmap_init_spi(spi, &ada4250_regmap_config);
356 if (IS_ERR(regmap))
357 return PTR_ERR(regmap);
358
359 st = iio_priv(indio_dev);
360 st->regmap = regmap;
361 st->spi = spi;
362
363 indio_dev->info = &ada4250_info;
364 indio_dev->name = "ada4250";
365 indio_dev->channels = ada4250_channels;
366 indio_dev->num_channels = ARRAY_SIZE(ada4250_channels);
367
368 mutex_init(&st->lock);
369
370 ret = ada4250_init(st);
371 if (ret) {
372 dev_err(&spi->dev, "ADA4250 init failed\n");
373 return ret;
374 }
375
376 return devm_iio_device_register(&spi->dev, indio_dev);
377 }
378
379 static const struct spi_device_id ada4250_id[] = {
380 { "ada4250", 0 },
381 {}
382 };
383 MODULE_DEVICE_TABLE(spi, ada4250_id);
384
385 static const struct of_device_id ada4250_of_match[] = {
386 { .compatible = "adi,ada4250" },
387 {},
388 };
389 MODULE_DEVICE_TABLE(of, ada4250_of_match);
390
391 static struct spi_driver ada4250_driver = {
392 .driver = {
393 .name = "ada4250",
394 .of_match_table = ada4250_of_match,
395 },
396 .probe = ada4250_probe,
397 .id_table = ada4250_id,
398 };
399 module_spi_driver(ada4250_driver);
400
401 MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com");
402 MODULE_DESCRIPTION("Analog Devices ADA4250");
403 MODULE_LICENSE("GPL v2");
404