xref: /openbmc/linux/drivers/iio/amplifiers/ad8366.c (revision b755c25f)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * AD8366 and similar Gain Amplifiers
4  * This driver supports the following gain amplifiers:
5  *   AD8366 Dual-Digital Variable Gain Amplifier (VGA)
6  *   ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
7  *   ADL5240 Digitally controlled variable gain amplifier (VGA)
8  *   HMC1119 0.25 dB LSB, 7-Bit, Silicon Digital Attenuator
9  *
10  * Copyright 2012-2019 Analog Devices Inc.
11  */
12 
13 #include <linux/device.h>
14 #include <linux/kernel.h>
15 #include <linux/slab.h>
16 #include <linux/sysfs.h>
17 #include <linux/spi/spi.h>
18 #include <linux/regulator/consumer.h>
19 #include <linux/gpio/consumer.h>
20 #include <linux/err.h>
21 #include <linux/module.h>
22 #include <linux/bitrev.h>
23 
24 #include <linux/iio/iio.h>
25 #include <linux/iio/sysfs.h>
26 
27 enum ad8366_type {
28 	ID_AD8366,
29 	ID_ADA4961,
30 	ID_ADL5240,
31 	ID_HMC1119,
32 };
33 
34 struct ad8366_info {
35 	int gain_min;
36 	int gain_max;
37 };
38 
39 struct ad8366_state {
40 	struct spi_device	*spi;
41 	struct regulator	*reg;
42 	struct mutex            lock; /* protect sensor state */
43 	struct gpio_desc	*reset_gpio;
44 	unsigned char		ch[2];
45 	enum ad8366_type	type;
46 	struct ad8366_info	*info;
47 	/*
48 	 * DMA (thus cache coherency maintenance) may require the
49 	 * transfer buffers to live in their own cache lines.
50 	 */
51 	unsigned char		data[2] __aligned(IIO_DMA_MINALIGN);
52 };
53 
54 static struct ad8366_info ad8366_infos[] = {
55 	[ID_AD8366] = {
56 		.gain_min = 4500,
57 		.gain_max = 20500,
58 	},
59 	[ID_ADA4961] = {
60 		.gain_min = -6000,
61 		.gain_max = 15000,
62 	},
63 	[ID_ADL5240] = {
64 		.gain_min = -11500,
65 		.gain_max = 20000,
66 	},
67 	[ID_HMC1119] = {
68 		.gain_min = -31750,
69 		.gain_max = 0,
70 	},
71 };
72 
73 static int ad8366_write(struct iio_dev *indio_dev,
74 			unsigned char ch_a, unsigned char ch_b)
75 {
76 	struct ad8366_state *st = iio_priv(indio_dev);
77 	int ret;
78 
79 	switch (st->type) {
80 	case ID_AD8366:
81 		ch_a = bitrev8(ch_a & 0x3F);
82 		ch_b = bitrev8(ch_b & 0x3F);
83 
84 		st->data[0] = ch_b >> 4;
85 		st->data[1] = (ch_b << 4) | (ch_a >> 2);
86 		break;
87 	case ID_ADA4961:
88 		st->data[0] = ch_a & 0x1F;
89 		break;
90 	case ID_ADL5240:
91 		st->data[0] = (ch_a & 0x3F);
92 		break;
93 	case ID_HMC1119:
94 		st->data[0] = ch_a;
95 		break;
96 	}
97 
98 	ret = spi_write(st->spi, st->data, indio_dev->num_channels);
99 	if (ret < 0)
100 		dev_err(&indio_dev->dev, "write failed (%d)", ret);
101 
102 	return ret;
103 }
104 
105 static int ad8366_read_raw(struct iio_dev *indio_dev,
106 			   struct iio_chan_spec const *chan,
107 			   int *val,
108 			   int *val2,
109 			   long m)
110 {
111 	struct ad8366_state *st = iio_priv(indio_dev);
112 	int ret;
113 	int code, gain = 0;
114 
115 	mutex_lock(&st->lock);
116 	switch (m) {
117 	case IIO_CHAN_INFO_HARDWAREGAIN:
118 		code = st->ch[chan->channel];
119 
120 		switch (st->type) {
121 		case ID_AD8366:
122 			gain = code * 253 + 4500;
123 			break;
124 		case ID_ADA4961:
125 			gain = 15000 - code * 1000;
126 			break;
127 		case ID_ADL5240:
128 			gain = 20000 - 31500 + code * 500;
129 			break;
130 		case ID_HMC1119:
131 			gain = -1 * code * 250;
132 			break;
133 		}
134 
135 		/* Values in dB */
136 		*val = gain / 1000;
137 		*val2 = (gain % 1000) * 1000;
138 
139 		ret = IIO_VAL_INT_PLUS_MICRO_DB;
140 		break;
141 	default:
142 		ret = -EINVAL;
143 	}
144 	mutex_unlock(&st->lock);
145 
146 	return ret;
147 };
148 
149 static int ad8366_write_raw(struct iio_dev *indio_dev,
150 			    struct iio_chan_spec const *chan,
151 			    int val,
152 			    int val2,
153 			    long mask)
154 {
155 	struct ad8366_state *st = iio_priv(indio_dev);
156 	struct ad8366_info *inf = st->info;
157 	int code = 0, gain;
158 	int ret;
159 
160 	/* Values in dB */
161 	if (val < 0)
162 		gain = (val * 1000) - (val2 / 1000);
163 	else
164 		gain = (val * 1000) + (val2 / 1000);
165 
166 	if (gain > inf->gain_max || gain < inf->gain_min)
167 		return -EINVAL;
168 
169 	switch (st->type) {
170 	case ID_AD8366:
171 		code = (gain - 4500) / 253;
172 		break;
173 	case ID_ADA4961:
174 		code = (15000 - gain) / 1000;
175 		break;
176 	case ID_ADL5240:
177 		code = ((gain - 500 - 20000) / 500) & 0x3F;
178 		break;
179 	case ID_HMC1119:
180 		code = (abs(gain) / 250) & 0x7F;
181 		break;
182 	}
183 
184 	mutex_lock(&st->lock);
185 	switch (mask) {
186 	case IIO_CHAN_INFO_HARDWAREGAIN:
187 		st->ch[chan->channel] = code;
188 		ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]);
189 		break;
190 	default:
191 		ret = -EINVAL;
192 	}
193 	mutex_unlock(&st->lock);
194 
195 	return ret;
196 }
197 
198 static int ad8366_write_raw_get_fmt(struct iio_dev *indio_dev,
199 				    struct iio_chan_spec const *chan,
200 				    long mask)
201 {
202 	switch (mask) {
203 	case IIO_CHAN_INFO_HARDWAREGAIN:
204 		return IIO_VAL_INT_PLUS_MICRO_DB;
205 	default:
206 		return -EINVAL;
207 	}
208 }
209 
210 static const struct iio_info ad8366_info = {
211 	.read_raw = &ad8366_read_raw,
212 	.write_raw = &ad8366_write_raw,
213 	.write_raw_get_fmt = &ad8366_write_raw_get_fmt,
214 };
215 
216 #define AD8366_CHAN(_channel) {				\
217 	.type = IIO_VOLTAGE,				\
218 	.output = 1,					\
219 	.indexed = 1,					\
220 	.channel = _channel,				\
221 	.info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN),\
222 }
223 
224 static const struct iio_chan_spec ad8366_channels[] = {
225 	AD8366_CHAN(0),
226 	AD8366_CHAN(1),
227 };
228 
229 static const struct iio_chan_spec ada4961_channels[] = {
230 	AD8366_CHAN(0),
231 };
232 
233 static int ad8366_probe(struct spi_device *spi)
234 {
235 	struct iio_dev *indio_dev;
236 	struct ad8366_state *st;
237 	int ret;
238 
239 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
240 	if (indio_dev == NULL)
241 		return -ENOMEM;
242 
243 	st = iio_priv(indio_dev);
244 
245 	st->reg = devm_regulator_get(&spi->dev, "vcc");
246 	if (!IS_ERR(st->reg)) {
247 		ret = regulator_enable(st->reg);
248 		if (ret)
249 			return ret;
250 	}
251 
252 	spi_set_drvdata(spi, indio_dev);
253 	mutex_init(&st->lock);
254 	st->spi = spi;
255 	st->type = spi_get_device_id(spi)->driver_data;
256 
257 	switch (st->type) {
258 	case ID_AD8366:
259 		indio_dev->channels = ad8366_channels;
260 		indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
261 		break;
262 	case ID_ADA4961:
263 	case ID_ADL5240:
264 	case ID_HMC1119:
265 		st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_HIGH);
266 		if (IS_ERR(st->reset_gpio)) {
267 			ret = PTR_ERR(st->reset_gpio);
268 			goto error_disable_reg;
269 		}
270 		indio_dev->channels = ada4961_channels;
271 		indio_dev->num_channels = ARRAY_SIZE(ada4961_channels);
272 		break;
273 	default:
274 		dev_err(&spi->dev, "Invalid device ID\n");
275 		ret = -EINVAL;
276 		goto error_disable_reg;
277 	}
278 
279 	st->info = &ad8366_infos[st->type];
280 	indio_dev->name = spi_get_device_id(spi)->name;
281 	indio_dev->info = &ad8366_info;
282 	indio_dev->modes = INDIO_DIRECT_MODE;
283 
284 	ret = ad8366_write(indio_dev, 0, 0);
285 	if (ret < 0)
286 		goto error_disable_reg;
287 
288 	ret = iio_device_register(indio_dev);
289 	if (ret)
290 		goto error_disable_reg;
291 
292 	return 0;
293 
294 error_disable_reg:
295 	if (!IS_ERR(st->reg))
296 		regulator_disable(st->reg);
297 
298 	return ret;
299 }
300 
301 static void ad8366_remove(struct spi_device *spi)
302 {
303 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
304 	struct ad8366_state *st = iio_priv(indio_dev);
305 	struct regulator *reg = st->reg;
306 
307 	iio_device_unregister(indio_dev);
308 
309 	if (!IS_ERR(reg))
310 		regulator_disable(reg);
311 }
312 
313 static const struct spi_device_id ad8366_id[] = {
314 	{"ad8366",  ID_AD8366},
315 	{"ada4961", ID_ADA4961},
316 	{"adl5240", ID_ADL5240},
317 	{"hmc1119", ID_HMC1119},
318 	{}
319 };
320 MODULE_DEVICE_TABLE(spi, ad8366_id);
321 
322 static struct spi_driver ad8366_driver = {
323 	.driver = {
324 		.name	= KBUILD_MODNAME,
325 	},
326 	.probe		= ad8366_probe,
327 	.remove		= ad8366_remove,
328 	.id_table	= ad8366_id,
329 };
330 
331 module_spi_driver(ad8366_driver);
332 
333 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
334 MODULE_DESCRIPTION("Analog Devices AD8366 and similar Gain Amplifiers");
335 MODULE_LICENSE("GPL v2");
336