1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Xilinx XADC driver
4  *
5  * Copyright 2013-2014 Analog Devices Inc.
6  *  Author: Lars-Peter Clausen <lars@metafoo.de>
7  *
8  * Documentation for the parts can be found at:
9  *  - XADC hardmacro: Xilinx UG480
10  *  - ZYNQ XADC interface: Xilinx UG585
11  *  - AXI XADC interface: Xilinx PG019
12  */
13 
14 #include <linux/clk.h>
15 #include <linux/device.h>
16 #include <linux/err.h>
17 #include <linux/interrupt.h>
18 #include <linux/io.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/of.h>
22 #include <linux/platform_device.h>
23 #include <linux/slab.h>
24 #include <linux/sysfs.h>
25 
26 #include <linux/iio/buffer.h>
27 #include <linux/iio/events.h>
28 #include <linux/iio/iio.h>
29 #include <linux/iio/sysfs.h>
30 #include <linux/iio/trigger.h>
31 #include <linux/iio/trigger_consumer.h>
32 #include <linux/iio/triggered_buffer.h>
33 
34 #include "xilinx-xadc.h"
35 
36 static const unsigned int XADC_ZYNQ_UNMASK_TIMEOUT = 500;
37 
38 /* ZYNQ register definitions */
39 #define XADC_ZYNQ_REG_CFG	0x00
40 #define XADC_ZYNQ_REG_INTSTS	0x04
41 #define XADC_ZYNQ_REG_INTMSK	0x08
42 #define XADC_ZYNQ_REG_STATUS	0x0c
43 #define XADC_ZYNQ_REG_CFIFO	0x10
44 #define XADC_ZYNQ_REG_DFIFO	0x14
45 #define XADC_ZYNQ_REG_CTL		0x18
46 
47 #define XADC_ZYNQ_CFG_ENABLE		BIT(31)
48 #define XADC_ZYNQ_CFG_CFIFOTH_MASK	(0xf << 20)
49 #define XADC_ZYNQ_CFG_CFIFOTH_OFFSET	20
50 #define XADC_ZYNQ_CFG_DFIFOTH_MASK	(0xf << 16)
51 #define XADC_ZYNQ_CFG_DFIFOTH_OFFSET	16
52 #define XADC_ZYNQ_CFG_WEDGE		BIT(13)
53 #define XADC_ZYNQ_CFG_REDGE		BIT(12)
54 #define XADC_ZYNQ_CFG_TCKRATE_MASK	(0x3 << 8)
55 #define XADC_ZYNQ_CFG_TCKRATE_DIV2	(0x0 << 8)
56 #define XADC_ZYNQ_CFG_TCKRATE_DIV4	(0x1 << 8)
57 #define XADC_ZYNQ_CFG_TCKRATE_DIV8	(0x2 << 8)
58 #define XADC_ZYNQ_CFG_TCKRATE_DIV16	(0x3 << 8)
59 #define XADC_ZYNQ_CFG_IGAP_MASK		0x1f
60 #define XADC_ZYNQ_CFG_IGAP(x)		(x)
61 
62 #define XADC_ZYNQ_INT_CFIFO_LTH		BIT(9)
63 #define XADC_ZYNQ_INT_DFIFO_GTH		BIT(8)
64 #define XADC_ZYNQ_INT_ALARM_MASK	0xff
65 #define XADC_ZYNQ_INT_ALARM_OFFSET	0
66 
67 #define XADC_ZYNQ_STATUS_CFIFO_LVL_MASK	(0xf << 16)
68 #define XADC_ZYNQ_STATUS_CFIFO_LVL_OFFSET	16
69 #define XADC_ZYNQ_STATUS_DFIFO_LVL_MASK	(0xf << 12)
70 #define XADC_ZYNQ_STATUS_DFIFO_LVL_OFFSET	12
71 #define XADC_ZYNQ_STATUS_CFIFOF		BIT(11)
72 #define XADC_ZYNQ_STATUS_CFIFOE		BIT(10)
73 #define XADC_ZYNQ_STATUS_DFIFOF		BIT(9)
74 #define XADC_ZYNQ_STATUS_DFIFOE		BIT(8)
75 #define XADC_ZYNQ_STATUS_OT		BIT(7)
76 #define XADC_ZYNQ_STATUS_ALM(x)		BIT(x)
77 
78 #define XADC_ZYNQ_CTL_RESET		BIT(4)
79 
80 #define XADC_ZYNQ_CMD_NOP		0x00
81 #define XADC_ZYNQ_CMD_READ		0x01
82 #define XADC_ZYNQ_CMD_WRITE		0x02
83 
84 #define XADC_ZYNQ_CMD(cmd, addr, data) (((cmd) << 26) | ((addr) << 16) | (data))
85 
86 /* AXI register definitions */
87 #define XADC_AXI_REG_RESET		0x00
88 #define XADC_AXI_REG_STATUS		0x04
89 #define XADC_AXI_REG_ALARM_STATUS	0x08
90 #define XADC_AXI_REG_CONVST		0x0c
91 #define XADC_AXI_REG_XADC_RESET		0x10
92 #define XADC_AXI_REG_GIER		0x5c
93 #define XADC_AXI_REG_IPISR		0x60
94 #define XADC_AXI_REG_IPIER		0x68
95 #define XADC_AXI_ADC_REG_OFFSET		0x200
96 
97 #define XADC_AXI_RESET_MAGIC		0xa
98 #define XADC_AXI_GIER_ENABLE		BIT(31)
99 
100 #define XADC_AXI_INT_EOS		BIT(4)
101 #define XADC_AXI_INT_ALARM_MASK		0x3c0f
102 
103 #define XADC_FLAGS_BUFFERED BIT(0)
104 
105 /*
106  * The XADC hardware supports a samplerate of up to 1MSPS. Unfortunately it does
107  * not have a hardware FIFO. Which means an interrupt is generated for each
108  * conversion sequence. At 1MSPS sample rate the CPU in ZYNQ7000 is completely
109  * overloaded by the interrupts that it soft-lockups. For this reason the driver
110  * limits the maximum samplerate 150kSPS. At this rate the CPU is fairly busy,
111  * but still responsive.
112  */
113 #define XADC_MAX_SAMPLERATE 150000
114 
115 static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
116 	uint32_t val)
117 {
118 	writel(val, xadc->base + reg);
119 }
120 
121 static void xadc_read_reg(struct xadc *xadc, unsigned int reg,
122 	uint32_t *val)
123 {
124 	*val = readl(xadc->base + reg);
125 }
126 
127 /*
128  * The ZYNQ interface uses two asynchronous FIFOs for communication with the
129  * XADC. Reads and writes to the XADC register are performed by submitting a
130  * request to the command FIFO (CFIFO), once the request has been completed the
131  * result can be read from the data FIFO (DFIFO). The method currently used in
132  * this driver is to submit the request for a read/write operation, then go to
133  * sleep and wait for an interrupt that signals that a response is available in
134  * the data FIFO.
135  */
136 
137 static void xadc_zynq_write_fifo(struct xadc *xadc, uint32_t *cmd,
138 	unsigned int n)
139 {
140 	unsigned int i;
141 
142 	for (i = 0; i < n; i++)
143 		xadc_write_reg(xadc, XADC_ZYNQ_REG_CFIFO, cmd[i]);
144 }
145 
146 static void xadc_zynq_drain_fifo(struct xadc *xadc)
147 {
148 	uint32_t status, tmp;
149 
150 	xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &status);
151 
152 	while (!(status & XADC_ZYNQ_STATUS_DFIFOE)) {
153 		xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &tmp);
154 		xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &status);
155 	}
156 }
157 
158 static void xadc_zynq_update_intmsk(struct xadc *xadc, unsigned int mask,
159 	unsigned int val)
160 {
161 	xadc->zynq_intmask &= ~mask;
162 	xadc->zynq_intmask |= val;
163 
164 	xadc_write_reg(xadc, XADC_ZYNQ_REG_INTMSK,
165 		xadc->zynq_intmask | xadc->zynq_masked_alarm);
166 }
167 
168 static int xadc_zynq_write_adc_reg(struct xadc *xadc, unsigned int reg,
169 	uint16_t val)
170 {
171 	uint32_t cmd[1];
172 	uint32_t tmp;
173 	int ret;
174 
175 	spin_lock_irq(&xadc->lock);
176 	xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
177 			XADC_ZYNQ_INT_DFIFO_GTH);
178 
179 	reinit_completion(&xadc->completion);
180 
181 	cmd[0] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_WRITE, reg, val);
182 	xadc_zynq_write_fifo(xadc, cmd, ARRAY_SIZE(cmd));
183 	xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &tmp);
184 	tmp &= ~XADC_ZYNQ_CFG_DFIFOTH_MASK;
185 	tmp |= 0 << XADC_ZYNQ_CFG_DFIFOTH_OFFSET;
186 	xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, tmp);
187 
188 	xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH, 0);
189 	spin_unlock_irq(&xadc->lock);
190 
191 	ret = wait_for_completion_interruptible_timeout(&xadc->completion, HZ);
192 	if (ret == 0)
193 		ret = -EIO;
194 	else
195 		ret = 0;
196 
197 	xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &tmp);
198 
199 	return ret;
200 }
201 
202 static int xadc_zynq_read_adc_reg(struct xadc *xadc, unsigned int reg,
203 	uint16_t *val)
204 {
205 	uint32_t cmd[2];
206 	uint32_t resp, tmp;
207 	int ret;
208 
209 	cmd[0] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_READ, reg, 0);
210 	cmd[1] = XADC_ZYNQ_CMD(XADC_ZYNQ_CMD_NOP, 0, 0);
211 
212 	spin_lock_irq(&xadc->lock);
213 	xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
214 			XADC_ZYNQ_INT_DFIFO_GTH);
215 	xadc_zynq_drain_fifo(xadc);
216 	reinit_completion(&xadc->completion);
217 
218 	xadc_zynq_write_fifo(xadc, cmd, ARRAY_SIZE(cmd));
219 	xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &tmp);
220 	tmp &= ~XADC_ZYNQ_CFG_DFIFOTH_MASK;
221 	tmp |= 1 << XADC_ZYNQ_CFG_DFIFOTH_OFFSET;
222 	xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, tmp);
223 
224 	xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH, 0);
225 	spin_unlock_irq(&xadc->lock);
226 	ret = wait_for_completion_interruptible_timeout(&xadc->completion, HZ);
227 	if (ret == 0)
228 		ret = -EIO;
229 	if (ret < 0)
230 		return ret;
231 
232 	xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &resp);
233 	xadc_read_reg(xadc, XADC_ZYNQ_REG_DFIFO, &resp);
234 
235 	*val = resp & 0xffff;
236 
237 	return 0;
238 }
239 
240 static unsigned int xadc_zynq_transform_alarm(unsigned int alarm)
241 {
242 	return ((alarm & 0x80) >> 4) |
243 		((alarm & 0x78) << 1) |
244 		(alarm & 0x07);
245 }
246 
247 /*
248  * The ZYNQ threshold interrupts are level sensitive. Since we can't make the
249  * threshold condition go way from within the interrupt handler, this means as
250  * soon as a threshold condition is present we would enter the interrupt handler
251  * again and again. To work around this we mask all active thresholds interrupts
252  * in the interrupt handler and start a timer. In this timer we poll the
253  * interrupt status and only if the interrupt is inactive we unmask it again.
254  */
255 static void xadc_zynq_unmask_worker(struct work_struct *work)
256 {
257 	struct xadc *xadc = container_of(work, struct xadc, zynq_unmask_work.work);
258 	unsigned int misc_sts, unmask;
259 
260 	xadc_read_reg(xadc, XADC_ZYNQ_REG_STATUS, &misc_sts);
261 
262 	misc_sts &= XADC_ZYNQ_INT_ALARM_MASK;
263 
264 	spin_lock_irq(&xadc->lock);
265 
266 	/* Clear those bits which are not active anymore */
267 	unmask = (xadc->zynq_masked_alarm ^ misc_sts) & xadc->zynq_masked_alarm;
268 	xadc->zynq_masked_alarm &= misc_sts;
269 
270 	/* Also clear those which are masked out anyway */
271 	xadc->zynq_masked_alarm &= ~xadc->zynq_intmask;
272 
273 	/* Clear the interrupts before we unmask them */
274 	xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, unmask);
275 
276 	xadc_zynq_update_intmsk(xadc, 0, 0);
277 
278 	spin_unlock_irq(&xadc->lock);
279 
280 	/* if still pending some alarm re-trigger the timer */
281 	if (xadc->zynq_masked_alarm) {
282 		schedule_delayed_work(&xadc->zynq_unmask_work,
283 				msecs_to_jiffies(XADC_ZYNQ_UNMASK_TIMEOUT));
284 	}
285 
286 }
287 
288 static irqreturn_t xadc_zynq_interrupt_handler(int irq, void *devid)
289 {
290 	struct iio_dev *indio_dev = devid;
291 	struct xadc *xadc = iio_priv(indio_dev);
292 	uint32_t status;
293 
294 	xadc_read_reg(xadc, XADC_ZYNQ_REG_INTSTS, &status);
295 
296 	status &= ~(xadc->zynq_intmask | xadc->zynq_masked_alarm);
297 
298 	if (!status)
299 		return IRQ_NONE;
300 
301 	spin_lock(&xadc->lock);
302 
303 	xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, status);
304 
305 	if (status & XADC_ZYNQ_INT_DFIFO_GTH) {
306 		xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_DFIFO_GTH,
307 			XADC_ZYNQ_INT_DFIFO_GTH);
308 		complete(&xadc->completion);
309 	}
310 
311 	status &= XADC_ZYNQ_INT_ALARM_MASK;
312 	if (status) {
313 		xadc->zynq_masked_alarm |= status;
314 		/*
315 		 * mask the current event interrupt,
316 		 * unmask it when the interrupt is no more active.
317 		 */
318 		xadc_zynq_update_intmsk(xadc, 0, 0);
319 
320 		xadc_handle_events(indio_dev,
321 				xadc_zynq_transform_alarm(status));
322 
323 		/* unmask the required interrupts in timer. */
324 		schedule_delayed_work(&xadc->zynq_unmask_work,
325 				msecs_to_jiffies(XADC_ZYNQ_UNMASK_TIMEOUT));
326 	}
327 	spin_unlock(&xadc->lock);
328 
329 	return IRQ_HANDLED;
330 }
331 
332 #define XADC_ZYNQ_TCK_RATE_MAX 50000000
333 #define XADC_ZYNQ_IGAP_DEFAULT 20
334 #define XADC_ZYNQ_PCAP_RATE_MAX 200000000
335 
336 static int xadc_zynq_setup(struct platform_device *pdev,
337 	struct iio_dev *indio_dev, int irq)
338 {
339 	struct xadc *xadc = iio_priv(indio_dev);
340 	unsigned long pcap_rate;
341 	unsigned int tck_div;
342 	unsigned int div;
343 	unsigned int igap;
344 	unsigned int tck_rate;
345 	int ret;
346 
347 	/* TODO: Figure out how to make igap and tck_rate configurable */
348 	igap = XADC_ZYNQ_IGAP_DEFAULT;
349 	tck_rate = XADC_ZYNQ_TCK_RATE_MAX;
350 
351 	xadc->zynq_intmask = ~0;
352 
353 	pcap_rate = clk_get_rate(xadc->clk);
354 	if (!pcap_rate)
355 		return -EINVAL;
356 
357 	if (pcap_rate > XADC_ZYNQ_PCAP_RATE_MAX) {
358 		ret = clk_set_rate(xadc->clk,
359 				   (unsigned long)XADC_ZYNQ_PCAP_RATE_MAX);
360 		if (ret)
361 			return ret;
362 	}
363 
364 	if (tck_rate > pcap_rate / 2) {
365 		div = 2;
366 	} else {
367 		div = pcap_rate / tck_rate;
368 		if (pcap_rate / div > XADC_ZYNQ_TCK_RATE_MAX)
369 			div++;
370 	}
371 
372 	if (div <= 3)
373 		tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV2;
374 	else if (div <= 7)
375 		tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV4;
376 	else if (div <= 15)
377 		tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV8;
378 	else
379 		tck_div = XADC_ZYNQ_CFG_TCKRATE_DIV16;
380 
381 	xadc_write_reg(xadc, XADC_ZYNQ_REG_CTL, XADC_ZYNQ_CTL_RESET);
382 	xadc_write_reg(xadc, XADC_ZYNQ_REG_CTL, 0);
383 	xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, ~0);
384 	xadc_write_reg(xadc, XADC_ZYNQ_REG_INTMSK, xadc->zynq_intmask);
385 	xadc_write_reg(xadc, XADC_ZYNQ_REG_CFG, XADC_ZYNQ_CFG_ENABLE |
386 			XADC_ZYNQ_CFG_REDGE | XADC_ZYNQ_CFG_WEDGE |
387 			tck_div | XADC_ZYNQ_CFG_IGAP(igap));
388 
389 	if (pcap_rate > XADC_ZYNQ_PCAP_RATE_MAX) {
390 		ret = clk_set_rate(xadc->clk, pcap_rate);
391 		if (ret)
392 			return ret;
393 	}
394 
395 	return 0;
396 }
397 
398 static unsigned long xadc_zynq_get_dclk_rate(struct xadc *xadc)
399 {
400 	unsigned int div;
401 	uint32_t val;
402 
403 	xadc_read_reg(xadc, XADC_ZYNQ_REG_CFG, &val);
404 
405 	switch (val & XADC_ZYNQ_CFG_TCKRATE_MASK) {
406 	case XADC_ZYNQ_CFG_TCKRATE_DIV4:
407 		div = 4;
408 		break;
409 	case XADC_ZYNQ_CFG_TCKRATE_DIV8:
410 		div = 8;
411 		break;
412 	case XADC_ZYNQ_CFG_TCKRATE_DIV16:
413 		div = 16;
414 		break;
415 	default:
416 		div = 2;
417 		break;
418 	}
419 
420 	return clk_get_rate(xadc->clk) / div;
421 }
422 
423 static void xadc_zynq_update_alarm(struct xadc *xadc, unsigned int alarm)
424 {
425 	unsigned long flags;
426 	uint32_t status;
427 
428 	/* Move OT to bit 7 */
429 	alarm = ((alarm & 0x08) << 4) | ((alarm & 0xf0) >> 1) | (alarm & 0x07);
430 
431 	spin_lock_irqsave(&xadc->lock, flags);
432 
433 	/* Clear previous interrupts if any. */
434 	xadc_read_reg(xadc, XADC_ZYNQ_REG_INTSTS, &status);
435 	xadc_write_reg(xadc, XADC_ZYNQ_REG_INTSTS, status & alarm);
436 
437 	xadc_zynq_update_intmsk(xadc, XADC_ZYNQ_INT_ALARM_MASK,
438 		~alarm & XADC_ZYNQ_INT_ALARM_MASK);
439 
440 	spin_unlock_irqrestore(&xadc->lock, flags);
441 }
442 
443 static const struct xadc_ops xadc_zynq_ops = {
444 	.read = xadc_zynq_read_adc_reg,
445 	.write = xadc_zynq_write_adc_reg,
446 	.setup = xadc_zynq_setup,
447 	.get_dclk_rate = xadc_zynq_get_dclk_rate,
448 	.interrupt_handler = xadc_zynq_interrupt_handler,
449 	.update_alarm = xadc_zynq_update_alarm,
450 };
451 
452 static int xadc_axi_read_adc_reg(struct xadc *xadc, unsigned int reg,
453 	uint16_t *val)
454 {
455 	uint32_t val32;
456 
457 	xadc_read_reg(xadc, XADC_AXI_ADC_REG_OFFSET + reg * 4, &val32);
458 	*val = val32 & 0xffff;
459 
460 	return 0;
461 }
462 
463 static int xadc_axi_write_adc_reg(struct xadc *xadc, unsigned int reg,
464 	uint16_t val)
465 {
466 	xadc_write_reg(xadc, XADC_AXI_ADC_REG_OFFSET + reg * 4, val);
467 
468 	return 0;
469 }
470 
471 static int xadc_axi_setup(struct platform_device *pdev,
472 	struct iio_dev *indio_dev, int irq)
473 {
474 	struct xadc *xadc = iio_priv(indio_dev);
475 
476 	xadc_write_reg(xadc, XADC_AXI_REG_RESET, XADC_AXI_RESET_MAGIC);
477 	xadc_write_reg(xadc, XADC_AXI_REG_GIER, XADC_AXI_GIER_ENABLE);
478 
479 	return 0;
480 }
481 
482 static irqreturn_t xadc_axi_interrupt_handler(int irq, void *devid)
483 {
484 	struct iio_dev *indio_dev = devid;
485 	struct xadc *xadc = iio_priv(indio_dev);
486 	uint32_t status, mask;
487 	unsigned int events;
488 
489 	xadc_read_reg(xadc, XADC_AXI_REG_IPISR, &status);
490 	xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &mask);
491 	status &= mask;
492 
493 	if (!status)
494 		return IRQ_NONE;
495 
496 	if ((status & XADC_AXI_INT_EOS) && xadc->trigger)
497 		iio_trigger_poll(xadc->trigger);
498 
499 	if (status & XADC_AXI_INT_ALARM_MASK) {
500 		/*
501 		 * The order of the bits in the AXI-XADC status register does
502 		 * not match the order of the bits in the XADC alarm enable
503 		 * register. xadc_handle_events() expects the events to be in
504 		 * the same order as the XADC alarm enable register.
505 		 */
506 		events = (status & 0x000e) >> 1;
507 		events |= (status & 0x0001) << 3;
508 		events |= (status & 0x3c00) >> 6;
509 		xadc_handle_events(indio_dev, events);
510 	}
511 
512 	xadc_write_reg(xadc, XADC_AXI_REG_IPISR, status);
513 
514 	return IRQ_HANDLED;
515 }
516 
517 static void xadc_axi_update_alarm(struct xadc *xadc, unsigned int alarm)
518 {
519 	uint32_t val;
520 	unsigned long flags;
521 
522 	/*
523 	 * The order of the bits in the AXI-XADC status register does not match
524 	 * the order of the bits in the XADC alarm enable register. We get
525 	 * passed the alarm mask in the same order as in the XADC alarm enable
526 	 * register.
527 	 */
528 	alarm = ((alarm & 0x07) << 1) | ((alarm & 0x08) >> 3) |
529 			((alarm & 0xf0) << 6);
530 
531 	spin_lock_irqsave(&xadc->lock, flags);
532 	xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
533 	val &= ~XADC_AXI_INT_ALARM_MASK;
534 	val |= alarm;
535 	xadc_write_reg(xadc, XADC_AXI_REG_IPIER, val);
536 	spin_unlock_irqrestore(&xadc->lock, flags);
537 }
538 
539 static unsigned long xadc_axi_get_dclk(struct xadc *xadc)
540 {
541 	return clk_get_rate(xadc->clk);
542 }
543 
544 static const struct xadc_ops xadc_axi_ops = {
545 	.read = xadc_axi_read_adc_reg,
546 	.write = xadc_axi_write_adc_reg,
547 	.setup = xadc_axi_setup,
548 	.get_dclk_rate = xadc_axi_get_dclk,
549 	.update_alarm = xadc_axi_update_alarm,
550 	.interrupt_handler = xadc_axi_interrupt_handler,
551 	.flags = XADC_FLAGS_BUFFERED,
552 };
553 
554 static int _xadc_update_adc_reg(struct xadc *xadc, unsigned int reg,
555 	uint16_t mask, uint16_t val)
556 {
557 	uint16_t tmp;
558 	int ret;
559 
560 	ret = _xadc_read_adc_reg(xadc, reg, &tmp);
561 	if (ret)
562 		return ret;
563 
564 	return _xadc_write_adc_reg(xadc, reg, (tmp & ~mask) | val);
565 }
566 
567 static int xadc_update_adc_reg(struct xadc *xadc, unsigned int reg,
568 	uint16_t mask, uint16_t val)
569 {
570 	int ret;
571 
572 	mutex_lock(&xadc->mutex);
573 	ret = _xadc_update_adc_reg(xadc, reg, mask, val);
574 	mutex_unlock(&xadc->mutex);
575 
576 	return ret;
577 }
578 
579 static unsigned long xadc_get_dclk_rate(struct xadc *xadc)
580 {
581 	return xadc->ops->get_dclk_rate(xadc);
582 }
583 
584 static int xadc_update_scan_mode(struct iio_dev *indio_dev,
585 	const unsigned long *mask)
586 {
587 	struct xadc *xadc = iio_priv(indio_dev);
588 	unsigned int n;
589 
590 	n = bitmap_weight(mask, indio_dev->masklength);
591 
592 	kfree(xadc->data);
593 	xadc->data = kcalloc(n, sizeof(*xadc->data), GFP_KERNEL);
594 	if (!xadc->data)
595 		return -ENOMEM;
596 
597 	return 0;
598 }
599 
600 static unsigned int xadc_scan_index_to_channel(unsigned int scan_index)
601 {
602 	switch (scan_index) {
603 	case 5:
604 		return XADC_REG_VCCPINT;
605 	case 6:
606 		return XADC_REG_VCCPAUX;
607 	case 7:
608 		return XADC_REG_VCCO_DDR;
609 	case 8:
610 		return XADC_REG_TEMP;
611 	case 9:
612 		return XADC_REG_VCCINT;
613 	case 10:
614 		return XADC_REG_VCCAUX;
615 	case 11:
616 		return XADC_REG_VPVN;
617 	case 12:
618 		return XADC_REG_VREFP;
619 	case 13:
620 		return XADC_REG_VREFN;
621 	case 14:
622 		return XADC_REG_VCCBRAM;
623 	default:
624 		return XADC_REG_VAUX(scan_index - 16);
625 	}
626 }
627 
628 static irqreturn_t xadc_trigger_handler(int irq, void *p)
629 {
630 	struct iio_poll_func *pf = p;
631 	struct iio_dev *indio_dev = pf->indio_dev;
632 	struct xadc *xadc = iio_priv(indio_dev);
633 	unsigned int chan;
634 	int i, j;
635 
636 	if (!xadc->data)
637 		goto out;
638 
639 	j = 0;
640 	for_each_set_bit(i, indio_dev->active_scan_mask,
641 		indio_dev->masklength) {
642 		chan = xadc_scan_index_to_channel(i);
643 		xadc_read_adc_reg(xadc, chan, &xadc->data[j]);
644 		j++;
645 	}
646 
647 	iio_push_to_buffers(indio_dev, xadc->data);
648 
649 out:
650 	iio_trigger_notify_done(indio_dev->trig);
651 
652 	return IRQ_HANDLED;
653 }
654 
655 static int xadc_trigger_set_state(struct iio_trigger *trigger, bool state)
656 {
657 	struct xadc *xadc = iio_trigger_get_drvdata(trigger);
658 	unsigned long flags;
659 	unsigned int convst;
660 	unsigned int val;
661 	int ret = 0;
662 
663 	mutex_lock(&xadc->mutex);
664 
665 	if (state) {
666 		/* Only one of the two triggers can be active at a time. */
667 		if (xadc->trigger != NULL) {
668 			ret = -EBUSY;
669 			goto err_out;
670 		} else {
671 			xadc->trigger = trigger;
672 			if (trigger == xadc->convst_trigger)
673 				convst = XADC_CONF0_EC;
674 			else
675 				convst = 0;
676 		}
677 		ret = _xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF0_EC,
678 					convst);
679 		if (ret)
680 			goto err_out;
681 	} else {
682 		xadc->trigger = NULL;
683 	}
684 
685 	spin_lock_irqsave(&xadc->lock, flags);
686 	xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
687 	xadc_write_reg(xadc, XADC_AXI_REG_IPISR, XADC_AXI_INT_EOS);
688 	if (state)
689 		val |= XADC_AXI_INT_EOS;
690 	else
691 		val &= ~XADC_AXI_INT_EOS;
692 	xadc_write_reg(xadc, XADC_AXI_REG_IPIER, val);
693 	spin_unlock_irqrestore(&xadc->lock, flags);
694 
695 err_out:
696 	mutex_unlock(&xadc->mutex);
697 
698 	return ret;
699 }
700 
701 static const struct iio_trigger_ops xadc_trigger_ops = {
702 	.set_trigger_state = &xadc_trigger_set_state,
703 };
704 
705 static struct iio_trigger *xadc_alloc_trigger(struct iio_dev *indio_dev,
706 	const char *name)
707 {
708 	struct iio_trigger *trig;
709 	int ret;
710 
711 	trig = iio_trigger_alloc("%s%d-%s", indio_dev->name,
712 				indio_dev->id, name);
713 	if (trig == NULL)
714 		return ERR_PTR(-ENOMEM);
715 
716 	trig->dev.parent = indio_dev->dev.parent;
717 	trig->ops = &xadc_trigger_ops;
718 	iio_trigger_set_drvdata(trig, iio_priv(indio_dev));
719 
720 	ret = iio_trigger_register(trig);
721 	if (ret)
722 		goto error_free_trig;
723 
724 	return trig;
725 
726 error_free_trig:
727 	iio_trigger_free(trig);
728 	return ERR_PTR(ret);
729 }
730 
731 static int xadc_power_adc_b(struct xadc *xadc, unsigned int seq_mode)
732 {
733 	uint16_t val;
734 
735 	/* Powerdown the ADC-B when it is not needed. */
736 	switch (seq_mode) {
737 	case XADC_CONF1_SEQ_SIMULTANEOUS:
738 	case XADC_CONF1_SEQ_INDEPENDENT:
739 		val = 0;
740 		break;
741 	default:
742 		val = XADC_CONF2_PD_ADC_B;
743 		break;
744 	}
745 
746 	return xadc_update_adc_reg(xadc, XADC_REG_CONF2, XADC_CONF2_PD_MASK,
747 		val);
748 }
749 
750 static int xadc_get_seq_mode(struct xadc *xadc, unsigned long scan_mode)
751 {
752 	unsigned int aux_scan_mode = scan_mode >> 16;
753 
754 	if (xadc->external_mux_mode == XADC_EXTERNAL_MUX_DUAL)
755 		return XADC_CONF1_SEQ_SIMULTANEOUS;
756 
757 	if ((aux_scan_mode & 0xff00) == 0 ||
758 		(aux_scan_mode & 0x00ff) == 0)
759 		return XADC_CONF1_SEQ_CONTINUOUS;
760 
761 	return XADC_CONF1_SEQ_SIMULTANEOUS;
762 }
763 
764 static int xadc_postdisable(struct iio_dev *indio_dev)
765 {
766 	struct xadc *xadc = iio_priv(indio_dev);
767 	unsigned long scan_mask;
768 	int ret;
769 	int i;
770 
771 	scan_mask = 1; /* Run calibration as part of the sequence */
772 	for (i = 0; i < indio_dev->num_channels; i++)
773 		scan_mask |= BIT(indio_dev->channels[i].scan_index);
774 
775 	/* Enable all channels and calibration */
776 	ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(0), scan_mask & 0xffff);
777 	if (ret)
778 		return ret;
779 
780 	ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
781 	if (ret)
782 		return ret;
783 
784 	ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
785 		XADC_CONF1_SEQ_CONTINUOUS);
786 	if (ret)
787 		return ret;
788 
789 	return xadc_power_adc_b(xadc, XADC_CONF1_SEQ_CONTINUOUS);
790 }
791 
792 static int xadc_preenable(struct iio_dev *indio_dev)
793 {
794 	struct xadc *xadc = iio_priv(indio_dev);
795 	unsigned long scan_mask;
796 	int seq_mode;
797 	int ret;
798 
799 	ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
800 		XADC_CONF1_SEQ_DEFAULT);
801 	if (ret)
802 		goto err;
803 
804 	scan_mask = *indio_dev->active_scan_mask;
805 	seq_mode = xadc_get_seq_mode(xadc, scan_mask);
806 
807 	ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(0), scan_mask & 0xffff);
808 	if (ret)
809 		goto err;
810 
811 	/*
812 	 * In simultaneous mode the upper and lower aux channels are samples at
813 	 * the same time. In this mode the upper 8 bits in the sequencer
814 	 * register are don't care and the lower 8 bits control two channels
815 	 * each. As such we must set the bit if either the channel in the lower
816 	 * group or the upper group is enabled.
817 	 */
818 	if (seq_mode == XADC_CONF1_SEQ_SIMULTANEOUS)
819 		scan_mask = ((scan_mask >> 8) | scan_mask) & 0xff0000;
820 
821 	ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
822 	if (ret)
823 		goto err;
824 
825 	ret = xadc_power_adc_b(xadc, seq_mode);
826 	if (ret)
827 		goto err;
828 
829 	ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_SEQ_MASK,
830 		seq_mode);
831 	if (ret)
832 		goto err;
833 
834 	return 0;
835 err:
836 	xadc_postdisable(indio_dev);
837 	return ret;
838 }
839 
840 static const struct iio_buffer_setup_ops xadc_buffer_ops = {
841 	.preenable = &xadc_preenable,
842 	.postdisable = &xadc_postdisable,
843 };
844 
845 static int xadc_read_samplerate(struct xadc *xadc)
846 {
847 	unsigned int div;
848 	uint16_t val16;
849 	int ret;
850 
851 	ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
852 	if (ret)
853 		return ret;
854 
855 	div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
856 	if (div < 2)
857 		div = 2;
858 
859 	return xadc_get_dclk_rate(xadc) / div / 26;
860 }
861 
862 static int xadc_read_raw(struct iio_dev *indio_dev,
863 	struct iio_chan_spec const *chan, int *val, int *val2, long info)
864 {
865 	struct xadc *xadc = iio_priv(indio_dev);
866 	uint16_t val16;
867 	int ret;
868 
869 	switch (info) {
870 	case IIO_CHAN_INFO_RAW:
871 		if (iio_buffer_enabled(indio_dev))
872 			return -EBUSY;
873 		ret = xadc_read_adc_reg(xadc, chan->address, &val16);
874 		if (ret < 0)
875 			return ret;
876 
877 		val16 >>= 4;
878 		if (chan->scan_type.sign == 'u')
879 			*val = val16;
880 		else
881 			*val = sign_extend32(val16, 11);
882 
883 		return IIO_VAL_INT;
884 	case IIO_CHAN_INFO_SCALE:
885 		switch (chan->type) {
886 		case IIO_VOLTAGE:
887 			/* V = (val * 3.0) / 4096 */
888 			switch (chan->address) {
889 			case XADC_REG_VCCINT:
890 			case XADC_REG_VCCAUX:
891 			case XADC_REG_VREFP:
892 			case XADC_REG_VREFN:
893 			case XADC_REG_VCCBRAM:
894 			case XADC_REG_VCCPINT:
895 			case XADC_REG_VCCPAUX:
896 			case XADC_REG_VCCO_DDR:
897 				*val = 3000;
898 				break;
899 			default:
900 				*val = 1000;
901 				break;
902 			}
903 			*val2 = 12;
904 			return IIO_VAL_FRACTIONAL_LOG2;
905 		case IIO_TEMP:
906 			/* Temp in C = (val * 503.975) / 4096 - 273.15 */
907 			*val = 503975;
908 			*val2 = 12;
909 			return IIO_VAL_FRACTIONAL_LOG2;
910 		default:
911 			return -EINVAL;
912 		}
913 	case IIO_CHAN_INFO_OFFSET:
914 		/* Only the temperature channel has an offset */
915 		*val = -((273150 << 12) / 503975);
916 		return IIO_VAL_INT;
917 	case IIO_CHAN_INFO_SAMP_FREQ:
918 		ret = xadc_read_samplerate(xadc);
919 		if (ret < 0)
920 			return ret;
921 
922 		*val = ret;
923 		return IIO_VAL_INT;
924 	default:
925 		return -EINVAL;
926 	}
927 }
928 
929 static int xadc_write_samplerate(struct xadc *xadc, int val)
930 {
931 	unsigned long clk_rate = xadc_get_dclk_rate(xadc);
932 	unsigned int div;
933 
934 	if (!clk_rate)
935 		return -EINVAL;
936 
937 	if (val <= 0)
938 		return -EINVAL;
939 
940 	/* Max. 150 kSPS */
941 	if (val > XADC_MAX_SAMPLERATE)
942 		val = XADC_MAX_SAMPLERATE;
943 
944 	val *= 26;
945 
946 	/* Min 1MHz */
947 	if (val < 1000000)
948 		val = 1000000;
949 
950 	/*
951 	 * We want to round down, but only if we do not exceed the 150 kSPS
952 	 * limit.
953 	 */
954 	div = clk_rate / val;
955 	if (clk_rate / div / 26 > XADC_MAX_SAMPLERATE)
956 		div++;
957 	if (div < 2)
958 		div = 2;
959 	else if (div > 0xff)
960 		div = 0xff;
961 
962 	return xadc_update_adc_reg(xadc, XADC_REG_CONF2, XADC_CONF2_DIV_MASK,
963 		div << XADC_CONF2_DIV_OFFSET);
964 }
965 
966 static int xadc_write_raw(struct iio_dev *indio_dev,
967 	struct iio_chan_spec const *chan, int val, int val2, long info)
968 {
969 	struct xadc *xadc = iio_priv(indio_dev);
970 
971 	if (info != IIO_CHAN_INFO_SAMP_FREQ)
972 		return -EINVAL;
973 
974 	return xadc_write_samplerate(xadc, val);
975 }
976 
977 static const struct iio_event_spec xadc_temp_events[] = {
978 	{
979 		.type = IIO_EV_TYPE_THRESH,
980 		.dir = IIO_EV_DIR_RISING,
981 		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
982 				BIT(IIO_EV_INFO_VALUE) |
983 				BIT(IIO_EV_INFO_HYSTERESIS),
984 	},
985 };
986 
987 /* Separate values for upper and lower thresholds, but only a shared enabled */
988 static const struct iio_event_spec xadc_voltage_events[] = {
989 	{
990 		.type = IIO_EV_TYPE_THRESH,
991 		.dir = IIO_EV_DIR_RISING,
992 		.mask_separate = BIT(IIO_EV_INFO_VALUE),
993 	}, {
994 		.type = IIO_EV_TYPE_THRESH,
995 		.dir = IIO_EV_DIR_FALLING,
996 		.mask_separate = BIT(IIO_EV_INFO_VALUE),
997 	}, {
998 		.type = IIO_EV_TYPE_THRESH,
999 		.dir = IIO_EV_DIR_EITHER,
1000 		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
1001 	},
1002 };
1003 
1004 #define XADC_CHAN_TEMP(_chan, _scan_index, _addr) { \
1005 	.type = IIO_TEMP, \
1006 	.indexed = 1, \
1007 	.channel = (_chan), \
1008 	.address = (_addr), \
1009 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
1010 		BIT(IIO_CHAN_INFO_SCALE) | \
1011 		BIT(IIO_CHAN_INFO_OFFSET), \
1012 	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
1013 	.event_spec = xadc_temp_events, \
1014 	.num_event_specs = ARRAY_SIZE(xadc_temp_events), \
1015 	.scan_index = (_scan_index), \
1016 	.scan_type = { \
1017 		.sign = 'u', \
1018 		.realbits = 12, \
1019 		.storagebits = 16, \
1020 		.shift = 4, \
1021 		.endianness = IIO_CPU, \
1022 	}, \
1023 }
1024 
1025 #define XADC_CHAN_VOLTAGE(_chan, _scan_index, _addr, _ext, _alarm) { \
1026 	.type = IIO_VOLTAGE, \
1027 	.indexed = 1, \
1028 	.channel = (_chan), \
1029 	.address = (_addr), \
1030 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
1031 		BIT(IIO_CHAN_INFO_SCALE), \
1032 	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
1033 	.event_spec = (_alarm) ? xadc_voltage_events : NULL, \
1034 	.num_event_specs = (_alarm) ? ARRAY_SIZE(xadc_voltage_events) : 0, \
1035 	.scan_index = (_scan_index), \
1036 	.scan_type = { \
1037 		.sign = ((_addr) == XADC_REG_VREFN) ? 's' : 'u', \
1038 		.realbits = 12, \
1039 		.storagebits = 16, \
1040 		.shift = 4, \
1041 		.endianness = IIO_CPU, \
1042 	}, \
1043 	.extend_name = _ext, \
1044 }
1045 
1046 static const struct iio_chan_spec xadc_channels[] = {
1047 	XADC_CHAN_TEMP(0, 8, XADC_REG_TEMP),
1048 	XADC_CHAN_VOLTAGE(0, 9, XADC_REG_VCCINT, "vccint", true),
1049 	XADC_CHAN_VOLTAGE(1, 10, XADC_REG_VCCAUX, "vccaux", true),
1050 	XADC_CHAN_VOLTAGE(2, 14, XADC_REG_VCCBRAM, "vccbram", true),
1051 	XADC_CHAN_VOLTAGE(3, 5, XADC_REG_VCCPINT, "vccpint", true),
1052 	XADC_CHAN_VOLTAGE(4, 6, XADC_REG_VCCPAUX, "vccpaux", true),
1053 	XADC_CHAN_VOLTAGE(5, 7, XADC_REG_VCCO_DDR, "vccoddr", true),
1054 	XADC_CHAN_VOLTAGE(6, 12, XADC_REG_VREFP, "vrefp", false),
1055 	XADC_CHAN_VOLTAGE(7, 13, XADC_REG_VREFN, "vrefn", false),
1056 	XADC_CHAN_VOLTAGE(8, 11, XADC_REG_VPVN, NULL, false),
1057 	XADC_CHAN_VOLTAGE(9, 16, XADC_REG_VAUX(0), NULL, false),
1058 	XADC_CHAN_VOLTAGE(10, 17, XADC_REG_VAUX(1), NULL, false),
1059 	XADC_CHAN_VOLTAGE(11, 18, XADC_REG_VAUX(2), NULL, false),
1060 	XADC_CHAN_VOLTAGE(12, 19, XADC_REG_VAUX(3), NULL, false),
1061 	XADC_CHAN_VOLTAGE(13, 20, XADC_REG_VAUX(4), NULL, false),
1062 	XADC_CHAN_VOLTAGE(14, 21, XADC_REG_VAUX(5), NULL, false),
1063 	XADC_CHAN_VOLTAGE(15, 22, XADC_REG_VAUX(6), NULL, false),
1064 	XADC_CHAN_VOLTAGE(16, 23, XADC_REG_VAUX(7), NULL, false),
1065 	XADC_CHAN_VOLTAGE(17, 24, XADC_REG_VAUX(8), NULL, false),
1066 	XADC_CHAN_VOLTAGE(18, 25, XADC_REG_VAUX(9), NULL, false),
1067 	XADC_CHAN_VOLTAGE(19, 26, XADC_REG_VAUX(10), NULL, false),
1068 	XADC_CHAN_VOLTAGE(20, 27, XADC_REG_VAUX(11), NULL, false),
1069 	XADC_CHAN_VOLTAGE(21, 28, XADC_REG_VAUX(12), NULL, false),
1070 	XADC_CHAN_VOLTAGE(22, 29, XADC_REG_VAUX(13), NULL, false),
1071 	XADC_CHAN_VOLTAGE(23, 30, XADC_REG_VAUX(14), NULL, false),
1072 	XADC_CHAN_VOLTAGE(24, 31, XADC_REG_VAUX(15), NULL, false),
1073 };
1074 
1075 static const struct iio_info xadc_info = {
1076 	.read_raw = &xadc_read_raw,
1077 	.write_raw = &xadc_write_raw,
1078 	.read_event_config = &xadc_read_event_config,
1079 	.write_event_config = &xadc_write_event_config,
1080 	.read_event_value = &xadc_read_event_value,
1081 	.write_event_value = &xadc_write_event_value,
1082 	.update_scan_mode = &xadc_update_scan_mode,
1083 };
1084 
1085 static const struct of_device_id xadc_of_match_table[] = {
1086 	{ .compatible = "xlnx,zynq-xadc-1.00.a", (void *)&xadc_zynq_ops },
1087 	{ .compatible = "xlnx,axi-xadc-1.00.a", (void *)&xadc_axi_ops },
1088 	{ },
1089 };
1090 MODULE_DEVICE_TABLE(of, xadc_of_match_table);
1091 
1092 static int xadc_parse_dt(struct iio_dev *indio_dev, struct device_node *np,
1093 	unsigned int *conf)
1094 {
1095 	struct xadc *xadc = iio_priv(indio_dev);
1096 	struct iio_chan_spec *channels, *chan;
1097 	struct device_node *chan_node, *child;
1098 	unsigned int num_channels;
1099 	const char *external_mux;
1100 	u32 ext_mux_chan;
1101 	u32 reg;
1102 	int ret;
1103 
1104 	*conf = 0;
1105 
1106 	ret = of_property_read_string(np, "xlnx,external-mux", &external_mux);
1107 	if (ret < 0 || strcasecmp(external_mux, "none") == 0)
1108 		xadc->external_mux_mode = XADC_EXTERNAL_MUX_NONE;
1109 	else if (strcasecmp(external_mux, "single") == 0)
1110 		xadc->external_mux_mode = XADC_EXTERNAL_MUX_SINGLE;
1111 	else if (strcasecmp(external_mux, "dual") == 0)
1112 		xadc->external_mux_mode = XADC_EXTERNAL_MUX_DUAL;
1113 	else
1114 		return -EINVAL;
1115 
1116 	if (xadc->external_mux_mode != XADC_EXTERNAL_MUX_NONE) {
1117 		ret = of_property_read_u32(np, "xlnx,external-mux-channel",
1118 					&ext_mux_chan);
1119 		if (ret < 0)
1120 			return ret;
1121 
1122 		if (xadc->external_mux_mode == XADC_EXTERNAL_MUX_SINGLE) {
1123 			if (ext_mux_chan == 0)
1124 				ext_mux_chan = XADC_REG_VPVN;
1125 			else if (ext_mux_chan <= 16)
1126 				ext_mux_chan = XADC_REG_VAUX(ext_mux_chan - 1);
1127 			else
1128 				return -EINVAL;
1129 		} else {
1130 			if (ext_mux_chan > 0 && ext_mux_chan <= 8)
1131 				ext_mux_chan = XADC_REG_VAUX(ext_mux_chan - 1);
1132 			else
1133 				return -EINVAL;
1134 		}
1135 
1136 		*conf |= XADC_CONF0_MUX | XADC_CONF0_CHAN(ext_mux_chan);
1137 	}
1138 
1139 	channels = kmemdup(xadc_channels, sizeof(xadc_channels), GFP_KERNEL);
1140 	if (!channels)
1141 		return -ENOMEM;
1142 
1143 	num_channels = 9;
1144 	chan = &channels[9];
1145 
1146 	chan_node = of_get_child_by_name(np, "xlnx,channels");
1147 	if (chan_node) {
1148 		for_each_child_of_node(chan_node, child) {
1149 			if (num_channels >= ARRAY_SIZE(xadc_channels)) {
1150 				of_node_put(child);
1151 				break;
1152 			}
1153 
1154 			ret = of_property_read_u32(child, "reg", &reg);
1155 			if (ret || reg > 16)
1156 				continue;
1157 
1158 			if (of_property_read_bool(child, "xlnx,bipolar"))
1159 				chan->scan_type.sign = 's';
1160 
1161 			if (reg == 0) {
1162 				chan->scan_index = 11;
1163 				chan->address = XADC_REG_VPVN;
1164 			} else {
1165 				chan->scan_index = 15 + reg;
1166 				chan->address = XADC_REG_VAUX(reg - 1);
1167 			}
1168 			num_channels++;
1169 			chan++;
1170 		}
1171 	}
1172 	of_node_put(chan_node);
1173 
1174 	indio_dev->num_channels = num_channels;
1175 	indio_dev->channels = krealloc(channels, sizeof(*channels) *
1176 					num_channels, GFP_KERNEL);
1177 	/* If we can't resize the channels array, just use the original */
1178 	if (!indio_dev->channels)
1179 		indio_dev->channels = channels;
1180 
1181 	return 0;
1182 }
1183 
1184 static int xadc_probe(struct platform_device *pdev)
1185 {
1186 	const struct of_device_id *id;
1187 	struct iio_dev *indio_dev;
1188 	unsigned int bipolar_mask;
1189 	unsigned int conf0;
1190 	struct xadc *xadc;
1191 	int ret;
1192 	int irq;
1193 	int i;
1194 
1195 	if (!pdev->dev.of_node)
1196 		return -ENODEV;
1197 
1198 	id = of_match_node(xadc_of_match_table, pdev->dev.of_node);
1199 	if (!id)
1200 		return -EINVAL;
1201 
1202 	irq = platform_get_irq(pdev, 0);
1203 	if (irq <= 0)
1204 		return -ENXIO;
1205 
1206 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*xadc));
1207 	if (!indio_dev)
1208 		return -ENOMEM;
1209 
1210 	xadc = iio_priv(indio_dev);
1211 	xadc->ops = id->data;
1212 	xadc->irq = irq;
1213 	init_completion(&xadc->completion);
1214 	mutex_init(&xadc->mutex);
1215 	spin_lock_init(&xadc->lock);
1216 	INIT_DELAYED_WORK(&xadc->zynq_unmask_work, xadc_zynq_unmask_worker);
1217 
1218 	xadc->base = devm_platform_ioremap_resource(pdev, 0);
1219 	if (IS_ERR(xadc->base))
1220 		return PTR_ERR(xadc->base);
1221 
1222 	indio_dev->name = "xadc";
1223 	indio_dev->modes = INDIO_DIRECT_MODE;
1224 	indio_dev->info = &xadc_info;
1225 
1226 	ret = xadc_parse_dt(indio_dev, pdev->dev.of_node, &conf0);
1227 	if (ret)
1228 		goto err_device_free;
1229 
1230 	if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
1231 		ret = iio_triggered_buffer_setup(indio_dev,
1232 			&iio_pollfunc_store_time, &xadc_trigger_handler,
1233 			&xadc_buffer_ops);
1234 		if (ret)
1235 			goto err_device_free;
1236 
1237 		xadc->convst_trigger = xadc_alloc_trigger(indio_dev, "convst");
1238 		if (IS_ERR(xadc->convst_trigger)) {
1239 			ret = PTR_ERR(xadc->convst_trigger);
1240 			goto err_triggered_buffer_cleanup;
1241 		}
1242 		xadc->samplerate_trigger = xadc_alloc_trigger(indio_dev,
1243 			"samplerate");
1244 		if (IS_ERR(xadc->samplerate_trigger)) {
1245 			ret = PTR_ERR(xadc->samplerate_trigger);
1246 			goto err_free_convst_trigger;
1247 		}
1248 	}
1249 
1250 	xadc->clk = devm_clk_get(&pdev->dev, NULL);
1251 	if (IS_ERR(xadc->clk)) {
1252 		ret = PTR_ERR(xadc->clk);
1253 		goto err_free_samplerate_trigger;
1254 	}
1255 
1256 	ret = clk_prepare_enable(xadc->clk);
1257 	if (ret)
1258 		goto err_free_samplerate_trigger;
1259 
1260 	/*
1261 	 * Make sure not to exceed the maximum samplerate since otherwise the
1262 	 * resulting interrupt storm will soft-lock the system.
1263 	 */
1264 	if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
1265 		ret = xadc_read_samplerate(xadc);
1266 		if (ret < 0)
1267 			goto err_free_samplerate_trigger;
1268 		if (ret > XADC_MAX_SAMPLERATE) {
1269 			ret = xadc_write_samplerate(xadc, XADC_MAX_SAMPLERATE);
1270 			if (ret < 0)
1271 				goto err_free_samplerate_trigger;
1272 		}
1273 	}
1274 
1275 	ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
1276 			dev_name(&pdev->dev), indio_dev);
1277 	if (ret)
1278 		goto err_clk_disable_unprepare;
1279 
1280 	ret = xadc->ops->setup(pdev, indio_dev, xadc->irq);
1281 	if (ret)
1282 		goto err_free_irq;
1283 
1284 	for (i = 0; i < 16; i++)
1285 		xadc_read_adc_reg(xadc, XADC_REG_THRESHOLD(i),
1286 			&xadc->threshold[i]);
1287 
1288 	ret = xadc_write_adc_reg(xadc, XADC_REG_CONF0, conf0);
1289 	if (ret)
1290 		goto err_free_irq;
1291 
1292 	bipolar_mask = 0;
1293 	for (i = 0; i < indio_dev->num_channels; i++) {
1294 		if (indio_dev->channels[i].scan_type.sign == 's')
1295 			bipolar_mask |= BIT(indio_dev->channels[i].scan_index);
1296 	}
1297 
1298 	ret = xadc_write_adc_reg(xadc, XADC_REG_INPUT_MODE(0), bipolar_mask);
1299 	if (ret)
1300 		goto err_free_irq;
1301 	ret = xadc_write_adc_reg(xadc, XADC_REG_INPUT_MODE(1),
1302 		bipolar_mask >> 16);
1303 	if (ret)
1304 		goto err_free_irq;
1305 
1306 	/* Disable all alarms */
1307 	ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_ALARM_MASK,
1308 				  XADC_CONF1_ALARM_MASK);
1309 	if (ret)
1310 		goto err_free_irq;
1311 
1312 	/* Set thresholds to min/max */
1313 	for (i = 0; i < 16; i++) {
1314 		/*
1315 		 * Set max voltage threshold and both temperature thresholds to
1316 		 * 0xffff, min voltage threshold to 0.
1317 		 */
1318 		if (i % 8 < 4 || i == 7)
1319 			xadc->threshold[i] = 0xffff;
1320 		else
1321 			xadc->threshold[i] = 0;
1322 		ret = xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
1323 			xadc->threshold[i]);
1324 		if (ret)
1325 			goto err_free_irq;
1326 	}
1327 
1328 	/* Go to non-buffered mode */
1329 	xadc_postdisable(indio_dev);
1330 
1331 	ret = iio_device_register(indio_dev);
1332 	if (ret)
1333 		goto err_free_irq;
1334 
1335 	platform_set_drvdata(pdev, indio_dev);
1336 
1337 	return 0;
1338 
1339 err_free_irq:
1340 	free_irq(xadc->irq, indio_dev);
1341 	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
1342 err_clk_disable_unprepare:
1343 	clk_disable_unprepare(xadc->clk);
1344 err_free_samplerate_trigger:
1345 	if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
1346 		iio_trigger_free(xadc->samplerate_trigger);
1347 err_free_convst_trigger:
1348 	if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
1349 		iio_trigger_free(xadc->convst_trigger);
1350 err_triggered_buffer_cleanup:
1351 	if (xadc->ops->flags & XADC_FLAGS_BUFFERED)
1352 		iio_triggered_buffer_cleanup(indio_dev);
1353 err_device_free:
1354 	kfree(indio_dev->channels);
1355 
1356 	return ret;
1357 }
1358 
1359 static int xadc_remove(struct platform_device *pdev)
1360 {
1361 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
1362 	struct xadc *xadc = iio_priv(indio_dev);
1363 
1364 	iio_device_unregister(indio_dev);
1365 	if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
1366 		iio_trigger_free(xadc->samplerate_trigger);
1367 		iio_trigger_free(xadc->convst_trigger);
1368 		iio_triggered_buffer_cleanup(indio_dev);
1369 	}
1370 	free_irq(xadc->irq, indio_dev);
1371 	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
1372 	clk_disable_unprepare(xadc->clk);
1373 	kfree(xadc->data);
1374 	kfree(indio_dev->channels);
1375 
1376 	return 0;
1377 }
1378 
1379 static struct platform_driver xadc_driver = {
1380 	.probe = xadc_probe,
1381 	.remove = xadc_remove,
1382 	.driver = {
1383 		.name = "xadc",
1384 		.of_match_table = xadc_of_match_table,
1385 	},
1386 };
1387 module_platform_driver(xadc_driver);
1388 
1389 MODULE_LICENSE("GPL v2");
1390 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
1391 MODULE_DESCRIPTION("Xilinx XADC IIO driver");
1392