1 /* 2 * TWL6030 GPADC module driver 3 * 4 * Copyright (C) 2009-2013 Texas Instruments Inc. 5 * Nishant Kamat <nskamat@ti.com> 6 * Balaji T K <balajitk@ti.com> 7 * Graeme Gregory <gg@slimlogic.co.uk> 8 * Girish S Ghongdemath <girishsg@ti.com> 9 * Ambresh K <ambresh@ti.com> 10 * Oleksandr Kozaruk <oleksandr.kozaruk@ti.com 11 * 12 * Based on twl4030-madc.c 13 * Copyright (C) 2008 Nokia Corporation 14 * Mikko Ylinen <mikko.k.ylinen@nokia.com> 15 * 16 * This program is free software; you can redistribute it and/or 17 * modify it under the terms of the GNU General Public License 18 * version 2 as published by the Free Software Foundation. 19 * 20 * This program is distributed in the hope that it will be useful, but 21 * WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 23 * General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 28 * 02110-1301 USA 29 * 30 */ 31 #include <linux/interrupt.h> 32 #include <linux/kernel.h> 33 #include <linux/module.h> 34 #include <linux/platform_device.h> 35 #include <linux/of_platform.h> 36 #include <linux/i2c/twl.h> 37 #include <linux/iio/iio.h> 38 #include <linux/iio/sysfs.h> 39 40 #define DRIVER_NAME "twl6030_gpadc" 41 42 /* 43 * twl6030 per TRM has 17 channels, and twl6032 has 19 channels 44 * 2 test network channels are not used, 45 * 2 die temperature channels are not used either, as it is not 46 * defined how to convert ADC value to temperature 47 */ 48 #define TWL6030_GPADC_USED_CHANNELS 13 49 #define TWL6030_GPADC_MAX_CHANNELS 15 50 #define TWL6032_GPADC_USED_CHANNELS 15 51 #define TWL6032_GPADC_MAX_CHANNELS 19 52 #define TWL6030_GPADC_NUM_TRIM_REGS 16 53 54 #define TWL6030_GPADC_CTRL_P1 0x05 55 56 #define TWL6032_GPADC_GPSELECT_ISB 0x07 57 #define TWL6032_GPADC_CTRL_P1 0x08 58 59 #define TWL6032_GPADC_GPCH0_LSB 0x0d 60 #define TWL6032_GPADC_GPCH0_MSB 0x0e 61 62 #define TWL6030_GPADC_CTRL_P1_SP1 BIT(3) 63 64 #define TWL6030_GPADC_GPCH0_LSB (0x29) 65 66 #define TWL6030_GPADC_RT_SW1_EOC_MASK BIT(5) 67 68 #define TWL6030_GPADC_TRIM1 0xCD 69 70 #define TWL6030_REG_TOGGLE1 0x90 71 #define TWL6030_GPADCS BIT(1) 72 #define TWL6030_GPADCR BIT(0) 73 74 /** 75 * struct twl6030_chnl_calib - channel calibration 76 * @gain: slope coefficient for ideal curve 77 * @gain_error: gain error 78 * @offset_error: offset of the real curve 79 */ 80 struct twl6030_chnl_calib { 81 s32 gain; 82 s32 gain_error; 83 s32 offset_error; 84 }; 85 86 /** 87 * struct twl6030_ideal_code - GPADC calibration parameters 88 * GPADC is calibrated in two points: close to the beginning and 89 * to the and of the measurable input range 90 * 91 * @channel: channel number 92 * @code1: ideal code for the input at the beginning 93 * @code2: ideal code for at the end of the range 94 * @volt1: voltage input at the beginning(low voltage) 95 * @volt2: voltage input at the end(high voltage) 96 */ 97 struct twl6030_ideal_code { 98 int channel; 99 u16 code1; 100 u16 code2; 101 u16 volt1; 102 u16 volt2; 103 }; 104 105 struct twl6030_gpadc_data; 106 107 /** 108 * struct twl6030_gpadc_platform_data - platform specific data 109 * @nchannels: number of GPADC channels 110 * @iio_channels: iio channels 111 * @twl6030_ideal: pointer to calibration parameters 112 * @start_conversion: pointer to ADC start conversion function 113 * @channel_to_reg pointer to ADC function to convert channel to 114 * register address for reading conversion result 115 * @calibrate: pointer to calibration function 116 */ 117 struct twl6030_gpadc_platform_data { 118 const int nchannels; 119 const struct iio_chan_spec *iio_channels; 120 const struct twl6030_ideal_code *ideal; 121 int (*start_conversion)(int channel); 122 u8 (*channel_to_reg)(int channel); 123 int (*calibrate)(struct twl6030_gpadc_data *gpadc); 124 }; 125 126 /** 127 * struct twl6030_gpadc_data - GPADC data 128 * @dev: device pointer 129 * @lock: mutual exclusion lock for the structure 130 * @irq_complete: completion to signal end of conversion 131 * @twl6030_cal_tbl: pointer to calibration data for each 132 * channel with gain error and offset 133 * @pdata: pointer to device specific data 134 */ 135 struct twl6030_gpadc_data { 136 struct device *dev; 137 struct mutex lock; 138 struct completion irq_complete; 139 struct twl6030_chnl_calib *twl6030_cal_tbl; 140 const struct twl6030_gpadc_platform_data *pdata; 141 }; 142 143 /* 144 * channels 11, 12, 13, 15 and 16 have no calibration data 145 * calibration offset is same for channels 1, 3, 4, 5 146 * 147 * The data is taken from GPADC_TRIM registers description. 148 * GPADC_TRIM registers keep difference between the code measured 149 * at volt1 and volt2 input voltages and corresponding code1 and code2 150 */ 151 static const struct twl6030_ideal_code 152 twl6030_ideal[TWL6030_GPADC_USED_CHANNELS] = { 153 [0] = { /* ch 0, external, battery type, resistor value */ 154 .channel = 0, 155 .code1 = 116, 156 .code2 = 745, 157 .volt1 = 141, 158 .volt2 = 910, 159 }, 160 [1] = { /* ch 1, external, battery temperature, NTC resistor value */ 161 .channel = 1, 162 .code1 = 82, 163 .code2 = 900, 164 .volt1 = 100, 165 .volt2 = 1100, 166 }, 167 [2] = { /* ch 2, external, audio accessory/general purpose */ 168 .channel = 2, 169 .code1 = 55, 170 .code2 = 818, 171 .volt1 = 101, 172 .volt2 = 1499, 173 }, 174 [3] = { /* ch 3, external, general purpose */ 175 .channel = 3, 176 .code1 = 82, 177 .code2 = 900, 178 .volt1 = 100, 179 .volt2 = 1100, 180 }, 181 [4] = { /* ch 4, external, temperature measurement/general purpose */ 182 .channel = 4, 183 .code1 = 82, 184 .code2 = 900, 185 .volt1 = 100, 186 .volt2 = 1100, 187 }, 188 [5] = { /* ch 5, external, general purpose */ 189 .channel = 5, 190 .code1 = 82, 191 .code2 = 900, 192 .volt1 = 100, 193 .volt2 = 1100, 194 }, 195 [6] = { /* ch 6, external, general purpose */ 196 .channel = 6, 197 .code1 = 82, 198 .code2 = 900, 199 .volt1 = 100, 200 .volt2 = 1100, 201 }, 202 [7] = { /* ch 7, internal, main battery */ 203 .channel = 7, 204 .code1 = 614, 205 .code2 = 941, 206 .volt1 = 3001, 207 .volt2 = 4599, 208 }, 209 [8] = { /* ch 8, internal, backup battery */ 210 .channel = 8, 211 .code1 = 82, 212 .code2 = 688, 213 .volt1 = 501, 214 .volt2 = 4203, 215 }, 216 [9] = { /* ch 9, internal, external charger input */ 217 .channel = 9, 218 .code1 = 182, 219 .code2 = 818, 220 .volt1 = 2001, 221 .volt2 = 8996, 222 }, 223 [10] = { /* ch 10, internal, VBUS */ 224 .channel = 10, 225 .code1 = 149, 226 .code2 = 818, 227 .volt1 = 1001, 228 .volt2 = 5497, 229 }, 230 [11] = { /* ch 11, internal, VBUS charging current */ 231 .channel = 11, 232 }, 233 /* ch 12, internal, Die temperature */ 234 /* ch 13, internal, Die temperature */ 235 [12] = { /* ch 14, internal, USB ID line */ 236 .channel = 14, 237 .code1 = 48, 238 .code2 = 714, 239 .volt1 = 323, 240 .volt2 = 4800, 241 }, 242 }; 243 244 static const struct twl6030_ideal_code 245 twl6032_ideal[TWL6032_GPADC_USED_CHANNELS] = { 246 [0] = { /* ch 0, external, battery type, resistor value */ 247 .channel = 0, 248 .code1 = 1441, 249 .code2 = 3276, 250 .volt1 = 440, 251 .volt2 = 1000, 252 }, 253 [1] = { /* ch 1, external, battery temperature, NTC resistor value */ 254 .channel = 1, 255 .code1 = 1441, 256 .code2 = 3276, 257 .volt1 = 440, 258 .volt2 = 1000, 259 }, 260 [2] = { /* ch 2, external, audio accessory/general purpose */ 261 .channel = 2, 262 .code1 = 1441, 263 .code2 = 3276, 264 .volt1 = 660, 265 .volt2 = 1500, 266 }, 267 [3] = { /* ch 3, external, temperature with external diode/general 268 purpose */ 269 .channel = 3, 270 .code1 = 1441, 271 .code2 = 3276, 272 .volt1 = 440, 273 .volt2 = 1000, 274 }, 275 [4] = { /* ch 4, external, temperature measurement/general purpose */ 276 .channel = 4, 277 .code1 = 1441, 278 .code2 = 3276, 279 .volt1 = 440, 280 .volt2 = 1000, 281 }, 282 [5] = { /* ch 5, external, general purpose */ 283 .channel = 5, 284 .code1 = 1441, 285 .code2 = 3276, 286 .volt1 = 440, 287 .volt2 = 1000, 288 }, 289 [6] = { /* ch 6, external, general purpose */ 290 .channel = 6, 291 .code1 = 1441, 292 .code2 = 3276, 293 .volt1 = 440, 294 .volt2 = 1000, 295 }, 296 [7] = { /* ch7, internal, system supply */ 297 .channel = 7, 298 .code1 = 1441, 299 .code2 = 3276, 300 .volt1 = 2200, 301 .volt2 = 5000, 302 }, 303 [8] = { /* ch8, internal, backup battery */ 304 .channel = 8, 305 .code1 = 1441, 306 .code2 = 3276, 307 .volt1 = 2200, 308 .volt2 = 5000, 309 }, 310 [9] = { /* ch 9, internal, external charger input */ 311 .channel = 9, 312 .code1 = 1441, 313 .code2 = 3276, 314 .volt1 = 3960, 315 .volt2 = 9000, 316 }, 317 [10] = { /* ch10, internal, VBUS */ 318 .channel = 10, 319 .code1 = 150, 320 .code2 = 751, 321 .volt1 = 1000, 322 .volt2 = 5000, 323 }, 324 [11] = { /* ch 11, internal, VBUS DC-DC output current */ 325 .channel = 11, 326 .code1 = 1441, 327 .code2 = 3276, 328 .volt1 = 660, 329 .volt2 = 1500, 330 }, 331 /* ch 12, internal, Die temperature */ 332 /* ch 13, internal, Die temperature */ 333 [12] = { /* ch 14, internal, USB ID line */ 334 .channel = 14, 335 .code1 = 1441, 336 .code2 = 3276, 337 .volt1 = 2420, 338 .volt2 = 5500, 339 }, 340 /* ch 15, internal, test network */ 341 /* ch 16, internal, test network */ 342 [13] = { /* ch 17, internal, battery charging current */ 343 .channel = 17, 344 }, 345 [14] = { /* ch 18, internal, battery voltage */ 346 .channel = 18, 347 .code1 = 1441, 348 .code2 = 3276, 349 .volt1 = 2200, 350 .volt2 = 5000, 351 }, 352 }; 353 354 static inline int twl6030_gpadc_write(u8 reg, u8 val) 355 { 356 return twl_i2c_write_u8(TWL6030_MODULE_GPADC, val, reg); 357 } 358 359 static inline int twl6030_gpadc_read(u8 reg, u8 *val) 360 { 361 362 return twl_i2c_read(TWL6030_MODULE_GPADC, val, reg, 2); 363 } 364 365 static int twl6030_gpadc_enable_irq(u8 mask) 366 { 367 int ret; 368 369 ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_LINE_B); 370 if (ret < 0) 371 return ret; 372 373 ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_STS_B); 374 375 return ret; 376 } 377 378 static void twl6030_gpadc_disable_irq(u8 mask) 379 { 380 twl6030_interrupt_mask(mask, REG_INT_MSK_LINE_B); 381 twl6030_interrupt_mask(mask, REG_INT_MSK_STS_B); 382 } 383 384 static irqreturn_t twl6030_gpadc_irq_handler(int irq, void *indio_dev) 385 { 386 struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); 387 388 complete(&gpadc->irq_complete); 389 390 return IRQ_HANDLED; 391 } 392 393 static int twl6030_start_conversion(int channel) 394 { 395 return twl6030_gpadc_write(TWL6030_GPADC_CTRL_P1, 396 TWL6030_GPADC_CTRL_P1_SP1); 397 } 398 399 static int twl6032_start_conversion(int channel) 400 { 401 int ret; 402 403 ret = twl6030_gpadc_write(TWL6032_GPADC_GPSELECT_ISB, channel); 404 if (ret) 405 return ret; 406 407 return twl6030_gpadc_write(TWL6032_GPADC_CTRL_P1, 408 TWL6030_GPADC_CTRL_P1_SP1); 409 } 410 411 static u8 twl6030_channel_to_reg(int channel) 412 { 413 return TWL6030_GPADC_GPCH0_LSB + 2 * channel; 414 } 415 416 static u8 twl6032_channel_to_reg(int channel) 417 { 418 /* 419 * for any prior chosen channel, when the conversion is ready 420 * the result is avalable in GPCH0_LSB, GPCH0_MSB. 421 */ 422 423 return TWL6032_GPADC_GPCH0_LSB; 424 } 425 426 static int twl6030_gpadc_lookup(const struct twl6030_ideal_code *ideal, 427 int channel, int size) 428 { 429 int i; 430 431 for (i = 0; i < size; i++) 432 if (ideal[i].channel == channel) 433 break; 434 435 return i; 436 } 437 438 static int twl6030_channel_calibrated(const struct twl6030_gpadc_platform_data 439 *pdata, int channel) 440 { 441 const struct twl6030_ideal_code *ideal = pdata->ideal; 442 int i; 443 444 i = twl6030_gpadc_lookup(ideal, channel, pdata->nchannels); 445 /* not calibrated channels have 0 in all structure members */ 446 return pdata->ideal[i].code2; 447 } 448 449 static int twl6030_gpadc_make_correction(struct twl6030_gpadc_data *gpadc, 450 int channel, int raw_code) 451 { 452 const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; 453 int corrected_code; 454 int i; 455 456 i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); 457 corrected_code = ((raw_code * 1000) - 458 gpadc->twl6030_cal_tbl[i].offset_error) / 459 gpadc->twl6030_cal_tbl[i].gain_error; 460 461 return corrected_code; 462 } 463 464 static int twl6030_gpadc_get_raw(struct twl6030_gpadc_data *gpadc, 465 int channel, int *res) 466 { 467 u8 reg = gpadc->pdata->channel_to_reg(channel); 468 __le16 val; 469 int raw_code; 470 int ret; 471 472 ret = twl6030_gpadc_read(reg, (u8 *)&val); 473 if (ret) { 474 dev_dbg(gpadc->dev, "unable to read register 0x%X\n", reg); 475 return ret; 476 } 477 478 raw_code = le16_to_cpu(val); 479 dev_dbg(gpadc->dev, "GPADC raw code: %d", raw_code); 480 481 if (twl6030_channel_calibrated(gpadc->pdata, channel)) 482 *res = twl6030_gpadc_make_correction(gpadc, channel, raw_code); 483 else 484 *res = raw_code; 485 486 return ret; 487 } 488 489 static int twl6030_gpadc_get_processed(struct twl6030_gpadc_data *gpadc, 490 int channel, int *val) 491 { 492 const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; 493 int corrected_code; 494 int channel_value; 495 int i; 496 int ret; 497 498 ret = twl6030_gpadc_get_raw(gpadc, channel, &corrected_code); 499 if (ret) 500 return ret; 501 502 i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); 503 channel_value = corrected_code * 504 gpadc->twl6030_cal_tbl[i].gain; 505 506 /* Shift back into mV range */ 507 channel_value /= 1000; 508 509 dev_dbg(gpadc->dev, "GPADC corrected code: %d", corrected_code); 510 dev_dbg(gpadc->dev, "GPADC value: %d", channel_value); 511 512 *val = channel_value; 513 514 return ret; 515 } 516 517 static int twl6030_gpadc_read_raw(struct iio_dev *indio_dev, 518 const struct iio_chan_spec *chan, 519 int *val, int *val2, long mask) 520 { 521 struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); 522 int ret; 523 long timeout; 524 525 mutex_lock(&gpadc->lock); 526 527 ret = gpadc->pdata->start_conversion(chan->channel); 528 if (ret) { 529 dev_err(gpadc->dev, "failed to start conversion\n"); 530 goto err; 531 } 532 /* wait for conversion to complete */ 533 timeout = wait_for_completion_interruptible_timeout( 534 &gpadc->irq_complete, msecs_to_jiffies(5000)); 535 if (timeout == 0) { 536 ret = -ETIMEDOUT; 537 goto err; 538 } else if (timeout < 0) { 539 ret = -EINTR; 540 goto err; 541 } 542 543 switch (mask) { 544 case IIO_CHAN_INFO_RAW: 545 ret = twl6030_gpadc_get_raw(gpadc, chan->channel, val); 546 ret = ret ? -EIO : IIO_VAL_INT; 547 break; 548 549 case IIO_CHAN_INFO_PROCESSED: 550 ret = twl6030_gpadc_get_processed(gpadc, chan->channel, val); 551 ret = ret ? -EIO : IIO_VAL_INT; 552 break; 553 554 default: 555 break; 556 } 557 err: 558 mutex_unlock(&gpadc->lock); 559 560 return ret; 561 } 562 563 /* 564 * The GPADC channels are calibrated using a two point calibration method. 565 * The channels measured with two known values: volt1 and volt2, and 566 * ideal corresponding output codes are known: code1, code2. 567 * The difference(d1, d2) between ideal and measured codes stored in trim 568 * registers. 569 * The goal is to find offset and gain of the real curve for each calibrated 570 * channel. 571 * gain: k = 1 + ((d2 - d1) / (x2 - x1)) 572 * offset: b = d1 + (k - 1) * x1 573 */ 574 static void twl6030_calibrate_channel(struct twl6030_gpadc_data *gpadc, 575 int channel, int d1, int d2) 576 { 577 int b, k, gain, x1, x2, i; 578 const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; 579 580 i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); 581 582 /* Gain */ 583 gain = ((ideal[i].volt2 - ideal[i].volt1) * 1000) / 584 (ideal[i].code2 - ideal[i].code1); 585 586 x1 = ideal[i].code1; 587 x2 = ideal[i].code2; 588 589 /* k - real curve gain */ 590 k = 1000 + (((d2 - d1) * 1000) / (x2 - x1)); 591 592 /* b - offset of the real curve gain */ 593 b = (d1 * 1000) - (k - 1000) * x1; 594 595 gpadc->twl6030_cal_tbl[i].gain = gain; 596 gpadc->twl6030_cal_tbl[i].gain_error = k; 597 gpadc->twl6030_cal_tbl[i].offset_error = b; 598 599 dev_dbg(gpadc->dev, "GPADC d1 for Chn: %d = %d\n", channel, d1); 600 dev_dbg(gpadc->dev, "GPADC d2 for Chn: %d = %d\n", channel, d2); 601 dev_dbg(gpadc->dev, "GPADC x1 for Chn: %d = %d\n", channel, x1); 602 dev_dbg(gpadc->dev, "GPADC x2 for Chn: %d = %d\n", channel, x2); 603 dev_dbg(gpadc->dev, "GPADC Gain for Chn: %d = %d\n", channel, gain); 604 dev_dbg(gpadc->dev, "GPADC k for Chn: %d = %d\n", channel, k); 605 dev_dbg(gpadc->dev, "GPADC b for Chn: %d = %d\n", channel, b); 606 } 607 608 static inline int twl6030_gpadc_get_trim_offset(s8 d) 609 { 610 /* 611 * XXX NOTE! 612 * bit 0 - sign, bit 7 - reserved, 6..1 - trim value 613 * though, the documentation states that trim value 614 * is absolute value, the correct conversion results are 615 * obtained if the value is interpreted as 2's complement. 616 */ 617 __u32 temp = ((d & 0x7f) >> 1) | ((d & 1) << 6); 618 619 return sign_extend32(temp, 6); 620 } 621 622 static int twl6030_calibration(struct twl6030_gpadc_data *gpadc) 623 { 624 int ret; 625 int chn; 626 u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; 627 s8 d1, d2; 628 629 /* 630 * for calibration two measurements have been performed at 631 * factory, for some channels, during the production test and 632 * have been stored in registers. This two stored values are 633 * used to correct the measurements. The values represent 634 * offsets for the given input from the output on ideal curve. 635 */ 636 ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, 637 TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); 638 if (ret < 0) { 639 dev_err(gpadc->dev, "calibration failed\n"); 640 return ret; 641 } 642 643 for (chn = 0; chn < TWL6030_GPADC_MAX_CHANNELS; chn++) { 644 645 switch (chn) { 646 case 0: 647 d1 = trim_regs[0]; 648 d2 = trim_regs[1]; 649 break; 650 case 1: 651 case 3: 652 case 4: 653 case 5: 654 case 6: 655 d1 = trim_regs[4]; 656 d2 = trim_regs[5]; 657 break; 658 case 2: 659 d1 = trim_regs[12]; 660 d2 = trim_regs[13]; 661 break; 662 case 7: 663 d1 = trim_regs[6]; 664 d2 = trim_regs[7]; 665 break; 666 case 8: 667 d1 = trim_regs[2]; 668 d2 = trim_regs[3]; 669 break; 670 case 9: 671 d1 = trim_regs[8]; 672 d2 = trim_regs[9]; 673 break; 674 case 10: 675 d1 = trim_regs[10]; 676 d2 = trim_regs[11]; 677 break; 678 case 14: 679 d1 = trim_regs[14]; 680 d2 = trim_regs[15]; 681 break; 682 default: 683 continue; 684 } 685 686 d1 = twl6030_gpadc_get_trim_offset(d1); 687 d2 = twl6030_gpadc_get_trim_offset(d2); 688 689 twl6030_calibrate_channel(gpadc, chn, d1, d2); 690 } 691 692 return 0; 693 } 694 695 static int twl6032_get_trim_value(u8 *trim_regs, unsigned int reg0, 696 unsigned int reg1, unsigned int mask0, unsigned int mask1, 697 unsigned int shift0) 698 { 699 int val; 700 701 val = (trim_regs[reg0] & mask0) << shift0; 702 val |= (trim_regs[reg1] & mask1) >> 1; 703 if (trim_regs[reg1] & 0x01) 704 val = -val; 705 706 return val; 707 } 708 709 static int twl6032_calibration(struct twl6030_gpadc_data *gpadc) 710 { 711 int chn, d1 = 0, d2 = 0, temp; 712 u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; 713 int ret; 714 715 ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, 716 TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); 717 if (ret < 0) { 718 dev_err(gpadc->dev, "calibration failed\n"); 719 return ret; 720 } 721 722 /* 723 * Loop to calculate the value needed for returning voltages from 724 * GPADC not values. 725 * 726 * gain is calculated to 3 decimal places fixed point. 727 */ 728 for (chn = 0; chn < TWL6032_GPADC_MAX_CHANNELS; chn++) { 729 730 switch (chn) { 731 case 0: 732 case 1: 733 case 2: 734 case 3: 735 case 4: 736 case 5: 737 case 6: 738 case 11: 739 case 14: 740 d1 = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, 741 0x06, 2); 742 d2 = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, 743 0x06, 2); 744 break; 745 case 8: 746 temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, 747 0x06, 2); 748 d1 = temp + twl6032_get_trim_value(trim_regs, 7, 6, 749 0x18, 0x1E, 1); 750 751 temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3F, 752 0x06, 2); 753 d2 = temp + twl6032_get_trim_value(trim_regs, 9, 7, 754 0x1F, 0x06, 2); 755 break; 756 case 9: 757 temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, 758 0x06, 2); 759 d1 = temp + twl6032_get_trim_value(trim_regs, 13, 11, 760 0x18, 0x1E, 1); 761 762 temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, 763 0x06, 2); 764 d2 = temp + twl6032_get_trim_value(trim_regs, 15, 13, 765 0x1F, 0x06, 1); 766 break; 767 case 10: 768 d1 = twl6032_get_trim_value(trim_regs, 10, 8, 0x0f, 769 0x0E, 3); 770 d2 = twl6032_get_trim_value(trim_regs, 14, 12, 0x0f, 771 0x0E, 3); 772 break; 773 case 7: 774 case 18: 775 temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, 776 0x06, 2); 777 778 d1 = (trim_regs[4] & 0x7E) >> 1; 779 if (trim_regs[4] & 0x01) 780 d1 = -d1; 781 d1 += temp; 782 783 temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, 784 0x06, 2); 785 786 d2 = (trim_regs[5] & 0xFE) >> 1; 787 if (trim_regs[5] & 0x01) 788 d2 = -d2; 789 790 d2 += temp; 791 break; 792 default: 793 /* No data for other channels */ 794 continue; 795 } 796 797 twl6030_calibrate_channel(gpadc, chn, d1, d2); 798 } 799 800 return 0; 801 } 802 803 #define TWL6030_GPADC_CHAN(chn, _type, chan_info) { \ 804 .type = _type, \ 805 .channel = chn, \ 806 .info_mask_separate = BIT(chan_info), \ 807 .indexed = 1, \ 808 } 809 810 static const struct iio_chan_spec twl6030_gpadc_iio_channels[] = { 811 TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 812 TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), 813 TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 814 TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 815 TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), 816 TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 817 TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 818 TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 819 TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 820 TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 821 TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 822 TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), 823 TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 824 }; 825 826 static const struct iio_chan_spec twl6032_gpadc_iio_channels[] = { 827 TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 828 TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), 829 TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 830 TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 831 TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), 832 TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 833 TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 834 TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 835 TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 836 TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 837 TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 838 TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 839 TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 840 TWL6030_GPADC_CHAN(17, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), 841 TWL6030_GPADC_CHAN(18, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), 842 }; 843 844 static const struct iio_info twl6030_gpadc_iio_info = { 845 .read_raw = &twl6030_gpadc_read_raw, 846 .driver_module = THIS_MODULE, 847 }; 848 849 static const struct twl6030_gpadc_platform_data twl6030_pdata = { 850 .iio_channels = twl6030_gpadc_iio_channels, 851 .nchannels = TWL6030_GPADC_USED_CHANNELS, 852 .ideal = twl6030_ideal, 853 .start_conversion = twl6030_start_conversion, 854 .channel_to_reg = twl6030_channel_to_reg, 855 .calibrate = twl6030_calibration, 856 }; 857 858 static const struct twl6030_gpadc_platform_data twl6032_pdata = { 859 .iio_channels = twl6032_gpadc_iio_channels, 860 .nchannels = TWL6032_GPADC_USED_CHANNELS, 861 .ideal = twl6032_ideal, 862 .start_conversion = twl6032_start_conversion, 863 .channel_to_reg = twl6032_channel_to_reg, 864 .calibrate = twl6032_calibration, 865 }; 866 867 static const struct of_device_id of_twl6030_match_tbl[] = { 868 { 869 .compatible = "ti,twl6030-gpadc", 870 .data = &twl6030_pdata, 871 }, 872 { 873 .compatible = "ti,twl6032-gpadc", 874 .data = &twl6032_pdata, 875 }, 876 { /* end */ } 877 }; 878 879 static int twl6030_gpadc_probe(struct platform_device *pdev) 880 { 881 struct device *dev = &pdev->dev; 882 struct twl6030_gpadc_data *gpadc; 883 const struct twl6030_gpadc_platform_data *pdata; 884 const struct of_device_id *match; 885 struct iio_dev *indio_dev; 886 int irq; 887 int ret; 888 889 match = of_match_device(of_twl6030_match_tbl, dev); 890 if (!match) 891 return -EINVAL; 892 893 pdata = match->data; 894 895 indio_dev = devm_iio_device_alloc(dev, sizeof(*gpadc)); 896 if (!indio_dev) 897 return -ENOMEM; 898 899 gpadc = iio_priv(indio_dev); 900 901 gpadc->twl6030_cal_tbl = devm_kzalloc(dev, 902 sizeof(*gpadc->twl6030_cal_tbl) * 903 pdata->nchannels, GFP_KERNEL); 904 if (!gpadc->twl6030_cal_tbl) 905 return -ENOMEM; 906 907 gpadc->dev = dev; 908 gpadc->pdata = pdata; 909 910 platform_set_drvdata(pdev, indio_dev); 911 mutex_init(&gpadc->lock); 912 init_completion(&gpadc->irq_complete); 913 914 ret = pdata->calibrate(gpadc); 915 if (ret < 0) { 916 dev_err(&pdev->dev, "failed to read calibration registers\n"); 917 return ret; 918 } 919 920 irq = platform_get_irq(pdev, 0); 921 if (irq < 0) { 922 dev_err(&pdev->dev, "failed to get irq\n"); 923 return irq; 924 } 925 926 ret = devm_request_threaded_irq(dev, irq, NULL, 927 twl6030_gpadc_irq_handler, 928 IRQF_ONESHOT, "twl6030_gpadc", indio_dev); 929 930 ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); 931 if (ret < 0) { 932 dev_err(&pdev->dev, "failed to enable GPADC interrupt\n"); 933 return ret; 934 } 935 936 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, 937 TWL6030_REG_TOGGLE1); 938 if (ret < 0) { 939 dev_err(&pdev->dev, "failed to enable GPADC module\n"); 940 return ret; 941 } 942 943 indio_dev->name = DRIVER_NAME; 944 indio_dev->dev.parent = dev; 945 indio_dev->info = &twl6030_gpadc_iio_info; 946 indio_dev->modes = INDIO_DIRECT_MODE; 947 indio_dev->channels = pdata->iio_channels; 948 indio_dev->num_channels = pdata->nchannels; 949 950 return iio_device_register(indio_dev); 951 } 952 953 static int twl6030_gpadc_remove(struct platform_device *pdev) 954 { 955 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 956 957 twl6030_gpadc_disable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); 958 iio_device_unregister(indio_dev); 959 960 return 0; 961 } 962 963 #ifdef CONFIG_PM_SLEEP 964 static int twl6030_gpadc_suspend(struct device *pdev) 965 { 966 int ret; 967 968 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCR, 969 TWL6030_REG_TOGGLE1); 970 if (ret) 971 dev_err(pdev, "error resetting GPADC (%d)!\n", ret); 972 973 return 0; 974 }; 975 976 static int twl6030_gpadc_resume(struct device *pdev) 977 { 978 int ret; 979 980 ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, 981 TWL6030_REG_TOGGLE1); 982 if (ret) 983 dev_err(pdev, "error setting GPADC (%d)!\n", ret); 984 985 return 0; 986 }; 987 #endif 988 989 static SIMPLE_DEV_PM_OPS(twl6030_gpadc_pm_ops, twl6030_gpadc_suspend, 990 twl6030_gpadc_resume); 991 992 static struct platform_driver twl6030_gpadc_driver = { 993 .probe = twl6030_gpadc_probe, 994 .remove = twl6030_gpadc_remove, 995 .driver = { 996 .name = DRIVER_NAME, 997 .pm = &twl6030_gpadc_pm_ops, 998 .of_match_table = of_twl6030_match_tbl, 999 }, 1000 }; 1001 1002 module_platform_driver(twl6030_gpadc_driver); 1003 1004 MODULE_ALIAS("platform: " DRIVER_NAME); 1005 MODULE_AUTHOR("Balaji T K <balajitk@ti.com>"); 1006 MODULE_AUTHOR("Graeme Gregory <gg@slimlogic.co.uk>"); 1007 MODULE_AUTHOR("Oleksandr Kozaruk <oleksandr.kozaruk@ti.com"); 1008 MODULE_DESCRIPTION("twl6030 ADC driver"); 1009 MODULE_LICENSE("GPL"); 1010