1 /* ADC driver for sunxi platforms' (A10, A13 and A31) GPADC 2 * 3 * Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons.com> 4 * 5 * This program is free software; you can redistribute it and/or modify it under 6 * the terms of the GNU General Public License version 2 as published by the 7 * Free Software Foundation. 8 * 9 * The Allwinner SoCs all have an ADC that can also act as a touchscreen 10 * controller and a thermal sensor. 11 * The thermal sensor works only when the ADC acts as a touchscreen controller 12 * and is configured to throw an interrupt every fixed periods of time (let say 13 * every X seconds). 14 * One would be tempted to disable the IP on the hardware side rather than 15 * disabling interrupts to save some power but that resets the internal clock of 16 * the IP, resulting in having to wait X seconds every time we want to read the 17 * value of the thermal sensor. 18 * This is also the reason of using autosuspend in pm_runtime. If there was no 19 * autosuspend, the thermal sensor would need X seconds after every 20 * pm_runtime_get_sync to get a value from the ADC. The autosuspend allows the 21 * thermal sensor to be requested again in a certain time span before it gets 22 * shutdown for not being used. 23 */ 24 25 #include <linux/completion.h> 26 #include <linux/interrupt.h> 27 #include <linux/io.h> 28 #include <linux/module.h> 29 #include <linux/of.h> 30 #include <linux/of_device.h> 31 #include <linux/platform_device.h> 32 #include <linux/pm_runtime.h> 33 #include <linux/regmap.h> 34 #include <linux/thermal.h> 35 #include <linux/delay.h> 36 37 #include <linux/iio/iio.h> 38 #include <linux/iio/driver.h> 39 #include <linux/iio/machine.h> 40 #include <linux/mfd/sun4i-gpadc.h> 41 42 static unsigned int sun4i_gpadc_chan_select(unsigned int chan) 43 { 44 return SUN4I_GPADC_CTRL1_ADC_CHAN_SELECT(chan); 45 } 46 47 static unsigned int sun6i_gpadc_chan_select(unsigned int chan) 48 { 49 return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan); 50 } 51 52 struct gpadc_data { 53 int temp_offset; 54 int temp_scale; 55 unsigned int tp_mode_en; 56 unsigned int tp_adc_select; 57 unsigned int (*adc_chan_select)(unsigned int chan); 58 unsigned int adc_chan_mask; 59 }; 60 61 static const struct gpadc_data sun4i_gpadc_data = { 62 .temp_offset = -1932, 63 .temp_scale = 133, 64 .tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN, 65 .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT, 66 .adc_chan_select = &sun4i_gpadc_chan_select, 67 .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK, 68 }; 69 70 static const struct gpadc_data sun5i_gpadc_data = { 71 .temp_offset = -1447, 72 .temp_scale = 100, 73 .tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN, 74 .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT, 75 .adc_chan_select = &sun4i_gpadc_chan_select, 76 .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK, 77 }; 78 79 static const struct gpadc_data sun6i_gpadc_data = { 80 .temp_offset = -1623, 81 .temp_scale = 167, 82 .tp_mode_en = SUN6I_GPADC_CTRL1_TP_MODE_EN, 83 .tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT, 84 .adc_chan_select = &sun6i_gpadc_chan_select, 85 .adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK, 86 }; 87 88 static const struct gpadc_data sun8i_a33_gpadc_data = { 89 .temp_offset = -1662, 90 .temp_scale = 162, 91 .tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN, 92 }; 93 94 struct sun4i_gpadc_iio { 95 struct iio_dev *indio_dev; 96 struct completion completion; 97 int temp_data; 98 u32 adc_data; 99 struct regmap *regmap; 100 unsigned int fifo_data_irq; 101 atomic_t ignore_fifo_data_irq; 102 unsigned int temp_data_irq; 103 atomic_t ignore_temp_data_irq; 104 const struct gpadc_data *data; 105 bool no_irq; 106 /* prevents concurrent reads of temperature and ADC */ 107 struct mutex mutex; 108 struct thermal_zone_device *tzd; 109 struct device *sensor_device; 110 }; 111 112 #define SUN4I_GPADC_ADC_CHANNEL(_channel, _name) { \ 113 .type = IIO_VOLTAGE, \ 114 .indexed = 1, \ 115 .channel = _channel, \ 116 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 117 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ 118 .datasheet_name = _name, \ 119 } 120 121 static struct iio_map sun4i_gpadc_hwmon_maps[] = { 122 { 123 .adc_channel_label = "temp_adc", 124 .consumer_dev_name = "iio_hwmon.0", 125 }, 126 { /* sentinel */ }, 127 }; 128 129 static const struct iio_chan_spec sun4i_gpadc_channels[] = { 130 SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"), 131 SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"), 132 SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"), 133 SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"), 134 { 135 .type = IIO_TEMP, 136 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 137 BIT(IIO_CHAN_INFO_SCALE) | 138 BIT(IIO_CHAN_INFO_OFFSET), 139 .datasheet_name = "temp_adc", 140 }, 141 }; 142 143 static const struct iio_chan_spec sun4i_gpadc_channels_no_temp[] = { 144 SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"), 145 SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"), 146 SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"), 147 SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"), 148 }; 149 150 static const struct iio_chan_spec sun8i_a33_gpadc_channels[] = { 151 { 152 .type = IIO_TEMP, 153 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 154 BIT(IIO_CHAN_INFO_SCALE) | 155 BIT(IIO_CHAN_INFO_OFFSET), 156 .datasheet_name = "temp_adc", 157 }, 158 }; 159 160 static const struct regmap_config sun4i_gpadc_regmap_config = { 161 .reg_bits = 32, 162 .val_bits = 32, 163 .reg_stride = 4, 164 .fast_io = true, 165 }; 166 167 static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel, 168 unsigned int irq) 169 { 170 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 171 int ret; 172 u32 reg; 173 174 pm_runtime_get_sync(indio_dev->dev.parent); 175 176 reinit_completion(&info->completion); 177 178 ret = regmap_write(info->regmap, SUN4I_GPADC_INT_FIFOC, 179 SUN4I_GPADC_INT_FIFOC_TP_FIFO_TRIG_LEVEL(1) | 180 SUN4I_GPADC_INT_FIFOC_TP_FIFO_FLUSH); 181 if (ret) 182 return ret; 183 184 ret = regmap_read(info->regmap, SUN4I_GPADC_CTRL1, ®); 185 if (ret) 186 return ret; 187 188 if (irq == info->fifo_data_irq) { 189 ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 190 info->data->tp_mode_en | 191 info->data->tp_adc_select | 192 info->data->adc_chan_select(channel)); 193 /* 194 * When the IP changes channel, it needs a bit of time to get 195 * correct values. 196 */ 197 if ((reg & info->data->adc_chan_mask) != 198 info->data->adc_chan_select(channel)) 199 mdelay(10); 200 201 } else { 202 /* 203 * The temperature sensor returns valid data only when the ADC 204 * operates in touchscreen mode. 205 */ 206 ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 207 info->data->tp_mode_en); 208 } 209 210 if (ret) 211 return ret; 212 213 /* 214 * When the IP changes mode between ADC or touchscreen, it 215 * needs a bit of time to get correct values. 216 */ 217 if ((reg & info->data->tp_adc_select) != info->data->tp_adc_select) 218 mdelay(100); 219 220 return 0; 221 } 222 223 static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val, 224 unsigned int irq) 225 { 226 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 227 int ret; 228 229 mutex_lock(&info->mutex); 230 231 ret = sun4i_prepare_for_irq(indio_dev, channel, irq); 232 if (ret) 233 goto err; 234 235 enable_irq(irq); 236 237 /* 238 * The temperature sensor throws an interruption periodically (currently 239 * set at periods of ~0.6s in sun4i_gpadc_runtime_resume). A 1s delay 240 * makes sure an interruption occurs in normal conditions. If it doesn't 241 * occur, then there is a timeout. 242 */ 243 if (!wait_for_completion_timeout(&info->completion, 244 msecs_to_jiffies(1000))) { 245 ret = -ETIMEDOUT; 246 goto err; 247 } 248 249 if (irq == info->fifo_data_irq) 250 *val = info->adc_data; 251 else 252 *val = info->temp_data; 253 254 ret = 0; 255 pm_runtime_mark_last_busy(indio_dev->dev.parent); 256 257 err: 258 pm_runtime_put_autosuspend(indio_dev->dev.parent); 259 disable_irq(irq); 260 mutex_unlock(&info->mutex); 261 262 return ret; 263 } 264 265 static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel, 266 int *val) 267 { 268 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 269 270 return sun4i_gpadc_read(indio_dev, channel, val, info->fifo_data_irq); 271 } 272 273 static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val) 274 { 275 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 276 277 if (info->no_irq) { 278 pm_runtime_get_sync(indio_dev->dev.parent); 279 280 regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val); 281 282 pm_runtime_mark_last_busy(indio_dev->dev.parent); 283 pm_runtime_put_autosuspend(indio_dev->dev.parent); 284 285 return 0; 286 } 287 288 return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq); 289 } 290 291 static int sun4i_gpadc_temp_offset(struct iio_dev *indio_dev, int *val) 292 { 293 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 294 295 *val = info->data->temp_offset; 296 297 return 0; 298 } 299 300 static int sun4i_gpadc_temp_scale(struct iio_dev *indio_dev, int *val) 301 { 302 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 303 304 *val = info->data->temp_scale; 305 306 return 0; 307 } 308 309 static int sun4i_gpadc_read_raw(struct iio_dev *indio_dev, 310 struct iio_chan_spec const *chan, int *val, 311 int *val2, long mask) 312 { 313 int ret; 314 315 switch (mask) { 316 case IIO_CHAN_INFO_OFFSET: 317 ret = sun4i_gpadc_temp_offset(indio_dev, val); 318 if (ret) 319 return ret; 320 321 return IIO_VAL_INT; 322 case IIO_CHAN_INFO_RAW: 323 if (chan->type == IIO_VOLTAGE) 324 ret = sun4i_gpadc_adc_read(indio_dev, chan->channel, 325 val); 326 else 327 ret = sun4i_gpadc_temp_read(indio_dev, val); 328 329 if (ret) 330 return ret; 331 332 return IIO_VAL_INT; 333 case IIO_CHAN_INFO_SCALE: 334 if (chan->type == IIO_VOLTAGE) { 335 /* 3000mV / 4096 * raw */ 336 *val = 0; 337 *val2 = 732421875; 338 return IIO_VAL_INT_PLUS_NANO; 339 } 340 341 ret = sun4i_gpadc_temp_scale(indio_dev, val); 342 if (ret) 343 return ret; 344 345 return IIO_VAL_INT; 346 default: 347 return -EINVAL; 348 } 349 350 return -EINVAL; 351 } 352 353 static const struct iio_info sun4i_gpadc_iio_info = { 354 .read_raw = sun4i_gpadc_read_raw, 355 .driver_module = THIS_MODULE, 356 }; 357 358 static irqreturn_t sun4i_gpadc_temp_data_irq_handler(int irq, void *dev_id) 359 { 360 struct sun4i_gpadc_iio *info = dev_id; 361 362 if (atomic_read(&info->ignore_temp_data_irq)) 363 goto out; 364 365 if (!regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, &info->temp_data)) 366 complete(&info->completion); 367 368 out: 369 return IRQ_HANDLED; 370 } 371 372 static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id) 373 { 374 struct sun4i_gpadc_iio *info = dev_id; 375 376 if (atomic_read(&info->ignore_fifo_data_irq)) 377 goto out; 378 379 if (!regmap_read(info->regmap, SUN4I_GPADC_DATA, &info->adc_data)) 380 complete(&info->completion); 381 382 out: 383 return IRQ_HANDLED; 384 } 385 386 static int sun4i_gpadc_runtime_suspend(struct device *dev) 387 { 388 struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev)); 389 390 /* Disable the ADC on IP */ 391 regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0); 392 /* Disable temperature sensor on IP */ 393 regmap_write(info->regmap, SUN4I_GPADC_TPR, 0); 394 395 return 0; 396 } 397 398 static int sun4i_gpadc_runtime_resume(struct device *dev) 399 { 400 struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev)); 401 402 /* clkin = 6MHz */ 403 regmap_write(info->regmap, SUN4I_GPADC_CTRL0, 404 SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) | 405 SUN4I_GPADC_CTRL0_FS_DIV(7) | 406 SUN4I_GPADC_CTRL0_T_ACQ(63)); 407 regmap_write(info->regmap, SUN4I_GPADC_CTRL1, info->data->tp_mode_en); 408 regmap_write(info->regmap, SUN4I_GPADC_CTRL3, 409 SUN4I_GPADC_CTRL3_FILTER_EN | 410 SUN4I_GPADC_CTRL3_FILTER_TYPE(1)); 411 /* period = SUN4I_GPADC_TPR_TEMP_PERIOD * 256 * 16 / clkin; ~0.6s */ 412 regmap_write(info->regmap, SUN4I_GPADC_TPR, 413 SUN4I_GPADC_TPR_TEMP_ENABLE | 414 SUN4I_GPADC_TPR_TEMP_PERIOD(800)); 415 416 return 0; 417 } 418 419 static int sun4i_gpadc_get_temp(void *data, int *temp) 420 { 421 struct sun4i_gpadc_iio *info = data; 422 int val, scale, offset; 423 424 if (sun4i_gpadc_temp_read(info->indio_dev, &val)) 425 return -ETIMEDOUT; 426 427 sun4i_gpadc_temp_scale(info->indio_dev, &scale); 428 sun4i_gpadc_temp_offset(info->indio_dev, &offset); 429 430 *temp = (val + offset) * scale; 431 432 return 0; 433 } 434 435 static const struct thermal_zone_of_device_ops sun4i_ts_tz_ops = { 436 .get_temp = &sun4i_gpadc_get_temp, 437 }; 438 439 static const struct dev_pm_ops sun4i_gpadc_pm_ops = { 440 .runtime_suspend = &sun4i_gpadc_runtime_suspend, 441 .runtime_resume = &sun4i_gpadc_runtime_resume, 442 }; 443 444 static int sun4i_irq_init(struct platform_device *pdev, const char *name, 445 irq_handler_t handler, const char *devname, 446 unsigned int *irq, atomic_t *atomic) 447 { 448 int ret; 449 struct sun4i_gpadc_dev *mfd_dev = dev_get_drvdata(pdev->dev.parent); 450 struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(&pdev->dev)); 451 452 /* 453 * Once the interrupt is activated, the IP continuously performs 454 * conversions thus throws interrupts. The interrupt is activated right 455 * after being requested but we want to control when these interrupts 456 * occur thus we disable it right after being requested. However, an 457 * interrupt might occur between these two instructions and we have to 458 * make sure that does not happen, by using atomic flags. We set the 459 * flag before requesting the interrupt and unset it right after 460 * disabling the interrupt. When an interrupt occurs between these two 461 * instructions, reading the atomic flag will tell us to ignore the 462 * interrupt. 463 */ 464 atomic_set(atomic, 1); 465 466 ret = platform_get_irq_byname(pdev, name); 467 if (ret < 0) { 468 dev_err(&pdev->dev, "no %s interrupt registered\n", name); 469 return ret; 470 } 471 472 ret = regmap_irq_get_virq(mfd_dev->regmap_irqc, ret); 473 if (ret < 0) { 474 dev_err(&pdev->dev, "failed to get virq for irq %s\n", name); 475 return ret; 476 } 477 478 *irq = ret; 479 ret = devm_request_any_context_irq(&pdev->dev, *irq, handler, 0, 480 devname, info); 481 if (ret < 0) { 482 dev_err(&pdev->dev, "could not request %s interrupt: %d\n", 483 name, ret); 484 return ret; 485 } 486 487 disable_irq(*irq); 488 atomic_set(atomic, 0); 489 490 return 0; 491 } 492 493 static const struct of_device_id sun4i_gpadc_of_id[] = { 494 { 495 .compatible = "allwinner,sun8i-a33-ths", 496 .data = &sun8i_a33_gpadc_data, 497 }, 498 { /* sentinel */ } 499 }; 500 501 static int sun4i_gpadc_probe_dt(struct platform_device *pdev, 502 struct iio_dev *indio_dev) 503 { 504 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 505 const struct of_device_id *of_dev; 506 struct resource *mem; 507 void __iomem *base; 508 int ret; 509 510 of_dev = of_match_device(sun4i_gpadc_of_id, &pdev->dev); 511 if (!of_dev) 512 return -ENODEV; 513 514 info->no_irq = true; 515 info->data = (struct gpadc_data *)of_dev->data; 516 indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels); 517 indio_dev->channels = sun8i_a33_gpadc_channels; 518 519 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 520 base = devm_ioremap_resource(&pdev->dev, mem); 521 if (IS_ERR(base)) 522 return PTR_ERR(base); 523 524 info->regmap = devm_regmap_init_mmio(&pdev->dev, base, 525 &sun4i_gpadc_regmap_config); 526 if (IS_ERR(info->regmap)) { 527 ret = PTR_ERR(info->regmap); 528 dev_err(&pdev->dev, "failed to init regmap: %d\n", ret); 529 return ret; 530 } 531 532 if (!IS_ENABLED(CONFIG_THERMAL_OF)) 533 return 0; 534 535 info->sensor_device = &pdev->dev; 536 info->tzd = thermal_zone_of_sensor_register(info->sensor_device, 0, 537 info, &sun4i_ts_tz_ops); 538 if (IS_ERR(info->tzd)) 539 dev_err(&pdev->dev, "could not register thermal sensor: %ld\n", 540 PTR_ERR(info->tzd)); 541 542 return PTR_ERR_OR_ZERO(info->tzd); 543 } 544 545 static int sun4i_gpadc_probe_mfd(struct platform_device *pdev, 546 struct iio_dev *indio_dev) 547 { 548 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 549 struct sun4i_gpadc_dev *sun4i_gpadc_dev = 550 dev_get_drvdata(pdev->dev.parent); 551 int ret; 552 553 info->no_irq = false; 554 info->regmap = sun4i_gpadc_dev->regmap; 555 556 indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels); 557 indio_dev->channels = sun4i_gpadc_channels; 558 559 info->data = (struct gpadc_data *)platform_get_device_id(pdev)->driver_data; 560 561 /* 562 * Since the controller needs to be in touchscreen mode for its thermal 563 * sensor to operate properly, and that switching between the two modes 564 * needs a delay, always registering in the thermal framework will 565 * significantly slow down the conversion rate of the ADCs. 566 * 567 * Therefore, instead of depending on THERMAL_OF in Kconfig, we only 568 * register the sensor if that option is enabled, eventually leaving 569 * that choice to the user. 570 */ 571 572 if (IS_ENABLED(CONFIG_THERMAL_OF)) { 573 /* 574 * This driver is a child of an MFD which has a node in the DT 575 * but not its children, because of DT backward compatibility 576 * for A10, A13 and A31 SoCs. Therefore, the resulting devices 577 * of this driver do not have an of_node variable. 578 * However, its parent (the MFD driver) has an of_node variable 579 * and since devm_thermal_zone_of_sensor_register uses its first 580 * argument to match the phandle defined in the node of the 581 * thermal driver with the of_node of the device passed as first 582 * argument and the third argument to call ops from 583 * thermal_zone_of_device_ops, the solution is to use the parent 584 * device as first argument to match the phandle with its 585 * of_node, and the device from this driver as third argument to 586 * return the temperature. 587 */ 588 info->sensor_device = pdev->dev.parent; 589 info->tzd = thermal_zone_of_sensor_register(info->sensor_device, 590 0, info, 591 &sun4i_ts_tz_ops); 592 if (IS_ERR(info->tzd)) { 593 dev_err(&pdev->dev, 594 "could not register thermal sensor: %ld\n", 595 PTR_ERR(info->tzd)); 596 return PTR_ERR(info->tzd); 597 } 598 } else { 599 indio_dev->num_channels = 600 ARRAY_SIZE(sun4i_gpadc_channels_no_temp); 601 indio_dev->channels = sun4i_gpadc_channels_no_temp; 602 } 603 604 if (IS_ENABLED(CONFIG_THERMAL_OF)) { 605 ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING", 606 sun4i_gpadc_temp_data_irq_handler, 607 "temp_data", &info->temp_data_irq, 608 &info->ignore_temp_data_irq); 609 if (ret < 0) 610 return ret; 611 } 612 613 ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING", 614 sun4i_gpadc_fifo_data_irq_handler, "fifo_data", 615 &info->fifo_data_irq, &info->ignore_fifo_data_irq); 616 if (ret < 0) 617 return ret; 618 619 if (IS_ENABLED(CONFIG_THERMAL_OF)) { 620 ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps); 621 if (ret < 0) { 622 dev_err(&pdev->dev, 623 "failed to register iio map array\n"); 624 return ret; 625 } 626 } 627 628 return 0; 629 } 630 631 static int sun4i_gpadc_probe(struct platform_device *pdev) 632 { 633 struct sun4i_gpadc_iio *info; 634 struct iio_dev *indio_dev; 635 int ret; 636 637 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); 638 if (!indio_dev) 639 return -ENOMEM; 640 641 info = iio_priv(indio_dev); 642 platform_set_drvdata(pdev, indio_dev); 643 644 mutex_init(&info->mutex); 645 info->indio_dev = indio_dev; 646 init_completion(&info->completion); 647 indio_dev->name = dev_name(&pdev->dev); 648 indio_dev->dev.parent = &pdev->dev; 649 indio_dev->dev.of_node = pdev->dev.of_node; 650 indio_dev->info = &sun4i_gpadc_iio_info; 651 indio_dev->modes = INDIO_DIRECT_MODE; 652 653 if (pdev->dev.of_node) 654 ret = sun4i_gpadc_probe_dt(pdev, indio_dev); 655 else 656 ret = sun4i_gpadc_probe_mfd(pdev, indio_dev); 657 658 if (ret) 659 return ret; 660 661 pm_runtime_set_autosuspend_delay(&pdev->dev, 662 SUN4I_GPADC_AUTOSUSPEND_DELAY); 663 pm_runtime_use_autosuspend(&pdev->dev); 664 pm_runtime_set_suspended(&pdev->dev); 665 pm_runtime_enable(&pdev->dev); 666 667 ret = devm_iio_device_register(&pdev->dev, indio_dev); 668 if (ret < 0) { 669 dev_err(&pdev->dev, "could not register the device\n"); 670 goto err_map; 671 } 672 673 return 0; 674 675 err_map: 676 if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF)) 677 iio_map_array_unregister(indio_dev); 678 679 pm_runtime_put(&pdev->dev); 680 pm_runtime_disable(&pdev->dev); 681 682 return ret; 683 } 684 685 static int sun4i_gpadc_remove(struct platform_device *pdev) 686 { 687 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 688 struct sun4i_gpadc_iio *info = iio_priv(indio_dev); 689 690 pm_runtime_put(&pdev->dev); 691 pm_runtime_disable(&pdev->dev); 692 693 if (!IS_ENABLED(CONFIG_THERMAL_OF)) 694 return 0; 695 696 thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd); 697 698 if (!info->no_irq) 699 iio_map_array_unregister(indio_dev); 700 701 return 0; 702 } 703 704 static const struct platform_device_id sun4i_gpadc_id[] = { 705 { "sun4i-a10-gpadc-iio", (kernel_ulong_t)&sun4i_gpadc_data }, 706 { "sun5i-a13-gpadc-iio", (kernel_ulong_t)&sun5i_gpadc_data }, 707 { "sun6i-a31-gpadc-iio", (kernel_ulong_t)&sun6i_gpadc_data }, 708 { /* sentinel */ }, 709 }; 710 MODULE_DEVICE_TABLE(platform, sun4i_gpadc_id); 711 712 static struct platform_driver sun4i_gpadc_driver = { 713 .driver = { 714 .name = "sun4i-gpadc-iio", 715 .of_match_table = sun4i_gpadc_of_id, 716 .pm = &sun4i_gpadc_pm_ops, 717 }, 718 .id_table = sun4i_gpadc_id, 719 .probe = sun4i_gpadc_probe, 720 .remove = sun4i_gpadc_remove, 721 }; 722 MODULE_DEVICE_TABLE(of, sun4i_gpadc_of_id); 723 724 module_platform_driver(sun4i_gpadc_driver); 725 726 MODULE_DESCRIPTION("ADC driver for sunxi platforms"); 727 MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>"); 728 MODULE_LICENSE("GPL v2"); 729