1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * This file is part of STM32 ADC driver 4 * 5 * Copyright (C) 2016, STMicroelectronics - All Rights Reserved 6 * Author: Fabrice Gasnier <fabrice.gasnier@st.com>. 7 */ 8 9 #include <linux/clk.h> 10 #include <linux/delay.h> 11 #include <linux/dma-mapping.h> 12 #include <linux/dmaengine.h> 13 #include <linux/iio/iio.h> 14 #include <linux/iio/buffer.h> 15 #include <linux/iio/timer/stm32-lptim-trigger.h> 16 #include <linux/iio/timer/stm32-timer-trigger.h> 17 #include <linux/iio/trigger.h> 18 #include <linux/iio/trigger_consumer.h> 19 #include <linux/iio/triggered_buffer.h> 20 #include <linux/interrupt.h> 21 #include <linux/io.h> 22 #include <linux/iopoll.h> 23 #include <linux/module.h> 24 #include <linux/platform_device.h> 25 #include <linux/pm_runtime.h> 26 #include <linux/of.h> 27 #include <linux/of_device.h> 28 29 #include "stm32-adc-core.h" 30 31 /* Number of linear calibration shadow registers / LINCALRDYW control bits */ 32 #define STM32H7_LINCALFACT_NUM 6 33 34 /* BOOST bit must be set on STM32H7 when ADC clock is above 20MHz */ 35 #define STM32H7_BOOST_CLKRATE 20000000UL 36 37 #define STM32_ADC_CH_MAX 20 /* max number of channels */ 38 #define STM32_ADC_CH_SZ 10 /* max channel name size */ 39 #define STM32_ADC_MAX_SQ 16 /* SQ1..SQ16 */ 40 #define STM32_ADC_MAX_SMP 7 /* SMPx range is [0..7] */ 41 #define STM32_ADC_TIMEOUT_US 100000 42 #define STM32_ADC_TIMEOUT (msecs_to_jiffies(STM32_ADC_TIMEOUT_US / 1000)) 43 #define STM32_ADC_HW_STOP_DELAY_MS 100 44 45 #define STM32_DMA_BUFFER_SIZE PAGE_SIZE 46 47 /* External trigger enable */ 48 enum stm32_adc_exten { 49 STM32_EXTEN_SWTRIG, 50 STM32_EXTEN_HWTRIG_RISING_EDGE, 51 STM32_EXTEN_HWTRIG_FALLING_EDGE, 52 STM32_EXTEN_HWTRIG_BOTH_EDGES, 53 }; 54 55 /* extsel - trigger mux selection value */ 56 enum stm32_adc_extsel { 57 STM32_EXT0, 58 STM32_EXT1, 59 STM32_EXT2, 60 STM32_EXT3, 61 STM32_EXT4, 62 STM32_EXT5, 63 STM32_EXT6, 64 STM32_EXT7, 65 STM32_EXT8, 66 STM32_EXT9, 67 STM32_EXT10, 68 STM32_EXT11, 69 STM32_EXT12, 70 STM32_EXT13, 71 STM32_EXT14, 72 STM32_EXT15, 73 STM32_EXT16, 74 STM32_EXT17, 75 STM32_EXT18, 76 STM32_EXT19, 77 STM32_EXT20, 78 }; 79 80 /** 81 * struct stm32_adc_trig_info - ADC trigger info 82 * @name: name of the trigger, corresponding to its source 83 * @extsel: trigger selection 84 */ 85 struct stm32_adc_trig_info { 86 const char *name; 87 enum stm32_adc_extsel extsel; 88 }; 89 90 /** 91 * struct stm32_adc_calib - optional adc calibration data 92 * @calfact_s: Calibration offset for single ended channels 93 * @calfact_d: Calibration offset in differential 94 * @lincalfact: Linearity calibration factor 95 * @calibrated: Indicates calibration status 96 */ 97 struct stm32_adc_calib { 98 u32 calfact_s; 99 u32 calfact_d; 100 u32 lincalfact[STM32H7_LINCALFACT_NUM]; 101 bool calibrated; 102 }; 103 104 /** 105 * struct stm32_adc_regs - stm32 ADC misc registers & bitfield desc 106 * @reg: register offset 107 * @mask: bitfield mask 108 * @shift: left shift 109 */ 110 struct stm32_adc_regs { 111 int reg; 112 int mask; 113 int shift; 114 }; 115 116 /** 117 * struct stm32_adc_regspec - stm32 registers definition 118 * @dr: data register offset 119 * @ier_eoc: interrupt enable register & eocie bitfield 120 * @isr_eoc: interrupt status register & eoc bitfield 121 * @sqr: reference to sequence registers array 122 * @exten: trigger control register & bitfield 123 * @extsel: trigger selection register & bitfield 124 * @res: resolution selection register & bitfield 125 * @smpr: smpr1 & smpr2 registers offset array 126 * @smp_bits: smpr1 & smpr2 index and bitfields 127 */ 128 struct stm32_adc_regspec { 129 const u32 dr; 130 const struct stm32_adc_regs ier_eoc; 131 const struct stm32_adc_regs isr_eoc; 132 const struct stm32_adc_regs *sqr; 133 const struct stm32_adc_regs exten; 134 const struct stm32_adc_regs extsel; 135 const struct stm32_adc_regs res; 136 const u32 smpr[2]; 137 const struct stm32_adc_regs *smp_bits; 138 }; 139 140 struct stm32_adc; 141 142 /** 143 * struct stm32_adc_cfg - stm32 compatible configuration data 144 * @regs: registers descriptions 145 * @adc_info: per instance input channels definitions 146 * @trigs: external trigger sources 147 * @clk_required: clock is required 148 * @has_vregready: vregready status flag presence 149 * @prepare: optional prepare routine (power-up, enable) 150 * @start_conv: routine to start conversions 151 * @stop_conv: routine to stop conversions 152 * @unprepare: optional unprepare routine (disable, power-down) 153 * @smp_cycles: programmable sampling time (ADC clock cycles) 154 */ 155 struct stm32_adc_cfg { 156 const struct stm32_adc_regspec *regs; 157 const struct stm32_adc_info *adc_info; 158 struct stm32_adc_trig_info *trigs; 159 bool clk_required; 160 bool has_vregready; 161 int (*prepare)(struct stm32_adc *); 162 void (*start_conv)(struct stm32_adc *, bool dma); 163 void (*stop_conv)(struct stm32_adc *); 164 void (*unprepare)(struct stm32_adc *); 165 const unsigned int *smp_cycles; 166 }; 167 168 /** 169 * struct stm32_adc - private data of each ADC IIO instance 170 * @common: reference to ADC block common data 171 * @offset: ADC instance register offset in ADC block 172 * @cfg: compatible configuration data 173 * @completion: end of single conversion completion 174 * @buffer: data buffer 175 * @clk: clock for this adc instance 176 * @irq: interrupt for this adc instance 177 * @lock: spinlock 178 * @bufi: data buffer index 179 * @num_conv: expected number of scan conversions 180 * @res: data resolution (e.g. RES bitfield value) 181 * @trigger_polarity: external trigger polarity (e.g. exten) 182 * @dma_chan: dma channel 183 * @rx_buf: dma rx buffer cpu address 184 * @rx_dma_buf: dma rx buffer bus address 185 * @rx_buf_sz: dma rx buffer size 186 * @difsel: bitmask to set single-ended/differential channel 187 * @pcsel: bitmask to preselect channels on some devices 188 * @smpr_val: sampling time settings (e.g. smpr1 / smpr2) 189 * @cal: optional calibration data on some devices 190 * @chan_name: channel name array 191 */ 192 struct stm32_adc { 193 struct stm32_adc_common *common; 194 u32 offset; 195 const struct stm32_adc_cfg *cfg; 196 struct completion completion; 197 u16 buffer[STM32_ADC_MAX_SQ]; 198 struct clk *clk; 199 int irq; 200 spinlock_t lock; /* interrupt lock */ 201 unsigned int bufi; 202 unsigned int num_conv; 203 u32 res; 204 u32 trigger_polarity; 205 struct dma_chan *dma_chan; 206 u8 *rx_buf; 207 dma_addr_t rx_dma_buf; 208 unsigned int rx_buf_sz; 209 u32 difsel; 210 u32 pcsel; 211 u32 smpr_val[2]; 212 struct stm32_adc_calib cal; 213 char chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ]; 214 }; 215 216 struct stm32_adc_diff_channel { 217 u32 vinp; 218 u32 vinn; 219 }; 220 221 /** 222 * struct stm32_adc_info - stm32 ADC, per instance config data 223 * @max_channels: Number of channels 224 * @resolutions: available resolutions 225 * @num_res: number of available resolutions 226 */ 227 struct stm32_adc_info { 228 int max_channels; 229 const unsigned int *resolutions; 230 const unsigned int num_res; 231 }; 232 233 static const unsigned int stm32f4_adc_resolutions[] = { 234 /* sorted values so the index matches RES[1:0] in STM32F4_ADC_CR1 */ 235 12, 10, 8, 6, 236 }; 237 238 /* stm32f4 can have up to 16 channels */ 239 static const struct stm32_adc_info stm32f4_adc_info = { 240 .max_channels = 16, 241 .resolutions = stm32f4_adc_resolutions, 242 .num_res = ARRAY_SIZE(stm32f4_adc_resolutions), 243 }; 244 245 static const unsigned int stm32h7_adc_resolutions[] = { 246 /* sorted values so the index matches RES[2:0] in STM32H7_ADC_CFGR */ 247 16, 14, 12, 10, 8, 248 }; 249 250 /* stm32h7 can have up to 20 channels */ 251 static const struct stm32_adc_info stm32h7_adc_info = { 252 .max_channels = STM32_ADC_CH_MAX, 253 .resolutions = stm32h7_adc_resolutions, 254 .num_res = ARRAY_SIZE(stm32h7_adc_resolutions), 255 }; 256 257 /* 258 * stm32f4_sq - describe regular sequence registers 259 * - L: sequence len (register & bit field) 260 * - SQ1..SQ16: sequence entries (register & bit field) 261 */ 262 static const struct stm32_adc_regs stm32f4_sq[STM32_ADC_MAX_SQ + 1] = { 263 /* L: len bit field description to be kept as first element */ 264 { STM32F4_ADC_SQR1, GENMASK(23, 20), 20 }, 265 /* SQ1..SQ16 registers & bit fields (reg, mask, shift) */ 266 { STM32F4_ADC_SQR3, GENMASK(4, 0), 0 }, 267 { STM32F4_ADC_SQR3, GENMASK(9, 5), 5 }, 268 { STM32F4_ADC_SQR3, GENMASK(14, 10), 10 }, 269 { STM32F4_ADC_SQR3, GENMASK(19, 15), 15 }, 270 { STM32F4_ADC_SQR3, GENMASK(24, 20), 20 }, 271 { STM32F4_ADC_SQR3, GENMASK(29, 25), 25 }, 272 { STM32F4_ADC_SQR2, GENMASK(4, 0), 0 }, 273 { STM32F4_ADC_SQR2, GENMASK(9, 5), 5 }, 274 { STM32F4_ADC_SQR2, GENMASK(14, 10), 10 }, 275 { STM32F4_ADC_SQR2, GENMASK(19, 15), 15 }, 276 { STM32F4_ADC_SQR2, GENMASK(24, 20), 20 }, 277 { STM32F4_ADC_SQR2, GENMASK(29, 25), 25 }, 278 { STM32F4_ADC_SQR1, GENMASK(4, 0), 0 }, 279 { STM32F4_ADC_SQR1, GENMASK(9, 5), 5 }, 280 { STM32F4_ADC_SQR1, GENMASK(14, 10), 10 }, 281 { STM32F4_ADC_SQR1, GENMASK(19, 15), 15 }, 282 }; 283 284 /* STM32F4 external trigger sources for all instances */ 285 static struct stm32_adc_trig_info stm32f4_adc_trigs[] = { 286 { TIM1_CH1, STM32_EXT0 }, 287 { TIM1_CH2, STM32_EXT1 }, 288 { TIM1_CH3, STM32_EXT2 }, 289 { TIM2_CH2, STM32_EXT3 }, 290 { TIM2_CH3, STM32_EXT4 }, 291 { TIM2_CH4, STM32_EXT5 }, 292 { TIM2_TRGO, STM32_EXT6 }, 293 { TIM3_CH1, STM32_EXT7 }, 294 { TIM3_TRGO, STM32_EXT8 }, 295 { TIM4_CH4, STM32_EXT9 }, 296 { TIM5_CH1, STM32_EXT10 }, 297 { TIM5_CH2, STM32_EXT11 }, 298 { TIM5_CH3, STM32_EXT12 }, 299 { TIM8_CH1, STM32_EXT13 }, 300 { TIM8_TRGO, STM32_EXT14 }, 301 {}, /* sentinel */ 302 }; 303 304 /* 305 * stm32f4_smp_bits[] - describe sampling time register index & bit fields 306 * Sorted so it can be indexed by channel number. 307 */ 308 static const struct stm32_adc_regs stm32f4_smp_bits[] = { 309 /* STM32F4_ADC_SMPR2: smpr[] index, mask, shift for SMP0 to SMP9 */ 310 { 1, GENMASK(2, 0), 0 }, 311 { 1, GENMASK(5, 3), 3 }, 312 { 1, GENMASK(8, 6), 6 }, 313 { 1, GENMASK(11, 9), 9 }, 314 { 1, GENMASK(14, 12), 12 }, 315 { 1, GENMASK(17, 15), 15 }, 316 { 1, GENMASK(20, 18), 18 }, 317 { 1, GENMASK(23, 21), 21 }, 318 { 1, GENMASK(26, 24), 24 }, 319 { 1, GENMASK(29, 27), 27 }, 320 /* STM32F4_ADC_SMPR1, smpr[] index, mask, shift for SMP10 to SMP18 */ 321 { 0, GENMASK(2, 0), 0 }, 322 { 0, GENMASK(5, 3), 3 }, 323 { 0, GENMASK(8, 6), 6 }, 324 { 0, GENMASK(11, 9), 9 }, 325 { 0, GENMASK(14, 12), 12 }, 326 { 0, GENMASK(17, 15), 15 }, 327 { 0, GENMASK(20, 18), 18 }, 328 { 0, GENMASK(23, 21), 21 }, 329 { 0, GENMASK(26, 24), 24 }, 330 }; 331 332 /* STM32F4 programmable sampling time (ADC clock cycles) */ 333 static const unsigned int stm32f4_adc_smp_cycles[STM32_ADC_MAX_SMP + 1] = { 334 3, 15, 28, 56, 84, 112, 144, 480, 335 }; 336 337 static const struct stm32_adc_regspec stm32f4_adc_regspec = { 338 .dr = STM32F4_ADC_DR, 339 .ier_eoc = { STM32F4_ADC_CR1, STM32F4_EOCIE }, 340 .isr_eoc = { STM32F4_ADC_SR, STM32F4_EOC }, 341 .sqr = stm32f4_sq, 342 .exten = { STM32F4_ADC_CR2, STM32F4_EXTEN_MASK, STM32F4_EXTEN_SHIFT }, 343 .extsel = { STM32F4_ADC_CR2, STM32F4_EXTSEL_MASK, 344 STM32F4_EXTSEL_SHIFT }, 345 .res = { STM32F4_ADC_CR1, STM32F4_RES_MASK, STM32F4_RES_SHIFT }, 346 .smpr = { STM32F4_ADC_SMPR1, STM32F4_ADC_SMPR2 }, 347 .smp_bits = stm32f4_smp_bits, 348 }; 349 350 static const struct stm32_adc_regs stm32h7_sq[STM32_ADC_MAX_SQ + 1] = { 351 /* L: len bit field description to be kept as first element */ 352 { STM32H7_ADC_SQR1, GENMASK(3, 0), 0 }, 353 /* SQ1..SQ16 registers & bit fields (reg, mask, shift) */ 354 { STM32H7_ADC_SQR1, GENMASK(10, 6), 6 }, 355 { STM32H7_ADC_SQR1, GENMASK(16, 12), 12 }, 356 { STM32H7_ADC_SQR1, GENMASK(22, 18), 18 }, 357 { STM32H7_ADC_SQR1, GENMASK(28, 24), 24 }, 358 { STM32H7_ADC_SQR2, GENMASK(4, 0), 0 }, 359 { STM32H7_ADC_SQR2, GENMASK(10, 6), 6 }, 360 { STM32H7_ADC_SQR2, GENMASK(16, 12), 12 }, 361 { STM32H7_ADC_SQR2, GENMASK(22, 18), 18 }, 362 { STM32H7_ADC_SQR2, GENMASK(28, 24), 24 }, 363 { STM32H7_ADC_SQR3, GENMASK(4, 0), 0 }, 364 { STM32H7_ADC_SQR3, GENMASK(10, 6), 6 }, 365 { STM32H7_ADC_SQR3, GENMASK(16, 12), 12 }, 366 { STM32H7_ADC_SQR3, GENMASK(22, 18), 18 }, 367 { STM32H7_ADC_SQR3, GENMASK(28, 24), 24 }, 368 { STM32H7_ADC_SQR4, GENMASK(4, 0), 0 }, 369 { STM32H7_ADC_SQR4, GENMASK(10, 6), 6 }, 370 }; 371 372 /* STM32H7 external trigger sources for all instances */ 373 static struct stm32_adc_trig_info stm32h7_adc_trigs[] = { 374 { TIM1_CH1, STM32_EXT0 }, 375 { TIM1_CH2, STM32_EXT1 }, 376 { TIM1_CH3, STM32_EXT2 }, 377 { TIM2_CH2, STM32_EXT3 }, 378 { TIM3_TRGO, STM32_EXT4 }, 379 { TIM4_CH4, STM32_EXT5 }, 380 { TIM8_TRGO, STM32_EXT7 }, 381 { TIM8_TRGO2, STM32_EXT8 }, 382 { TIM1_TRGO, STM32_EXT9 }, 383 { TIM1_TRGO2, STM32_EXT10 }, 384 { TIM2_TRGO, STM32_EXT11 }, 385 { TIM4_TRGO, STM32_EXT12 }, 386 { TIM6_TRGO, STM32_EXT13 }, 387 { TIM15_TRGO, STM32_EXT14 }, 388 { TIM3_CH4, STM32_EXT15 }, 389 { LPTIM1_OUT, STM32_EXT18 }, 390 { LPTIM2_OUT, STM32_EXT19 }, 391 { LPTIM3_OUT, STM32_EXT20 }, 392 {}, 393 }; 394 395 /* 396 * stm32h7_smp_bits - describe sampling time register index & bit fields 397 * Sorted so it can be indexed by channel number. 398 */ 399 static const struct stm32_adc_regs stm32h7_smp_bits[] = { 400 /* STM32H7_ADC_SMPR1, smpr[] index, mask, shift for SMP0 to SMP9 */ 401 { 0, GENMASK(2, 0), 0 }, 402 { 0, GENMASK(5, 3), 3 }, 403 { 0, GENMASK(8, 6), 6 }, 404 { 0, GENMASK(11, 9), 9 }, 405 { 0, GENMASK(14, 12), 12 }, 406 { 0, GENMASK(17, 15), 15 }, 407 { 0, GENMASK(20, 18), 18 }, 408 { 0, GENMASK(23, 21), 21 }, 409 { 0, GENMASK(26, 24), 24 }, 410 { 0, GENMASK(29, 27), 27 }, 411 /* STM32H7_ADC_SMPR2, smpr[] index, mask, shift for SMP10 to SMP19 */ 412 { 1, GENMASK(2, 0), 0 }, 413 { 1, GENMASK(5, 3), 3 }, 414 { 1, GENMASK(8, 6), 6 }, 415 { 1, GENMASK(11, 9), 9 }, 416 { 1, GENMASK(14, 12), 12 }, 417 { 1, GENMASK(17, 15), 15 }, 418 { 1, GENMASK(20, 18), 18 }, 419 { 1, GENMASK(23, 21), 21 }, 420 { 1, GENMASK(26, 24), 24 }, 421 { 1, GENMASK(29, 27), 27 }, 422 }; 423 424 /* STM32H7 programmable sampling time (ADC clock cycles, rounded down) */ 425 static const unsigned int stm32h7_adc_smp_cycles[STM32_ADC_MAX_SMP + 1] = { 426 1, 2, 8, 16, 32, 64, 387, 810, 427 }; 428 429 static const struct stm32_adc_regspec stm32h7_adc_regspec = { 430 .dr = STM32H7_ADC_DR, 431 .ier_eoc = { STM32H7_ADC_IER, STM32H7_EOCIE }, 432 .isr_eoc = { STM32H7_ADC_ISR, STM32H7_EOC }, 433 .sqr = stm32h7_sq, 434 .exten = { STM32H7_ADC_CFGR, STM32H7_EXTEN_MASK, STM32H7_EXTEN_SHIFT }, 435 .extsel = { STM32H7_ADC_CFGR, STM32H7_EXTSEL_MASK, 436 STM32H7_EXTSEL_SHIFT }, 437 .res = { STM32H7_ADC_CFGR, STM32H7_RES_MASK, STM32H7_RES_SHIFT }, 438 .smpr = { STM32H7_ADC_SMPR1, STM32H7_ADC_SMPR2 }, 439 .smp_bits = stm32h7_smp_bits, 440 }; 441 442 /** 443 * STM32 ADC registers access routines 444 * @adc: stm32 adc instance 445 * @reg: reg offset in adc instance 446 * 447 * Note: All instances share same base, with 0x0, 0x100 or 0x200 offset resp. 448 * for adc1, adc2 and adc3. 449 */ 450 static u32 stm32_adc_readl(struct stm32_adc *adc, u32 reg) 451 { 452 return readl_relaxed(adc->common->base + adc->offset + reg); 453 } 454 455 #define stm32_adc_readl_addr(addr) stm32_adc_readl(adc, addr) 456 457 #define stm32_adc_readl_poll_timeout(reg, val, cond, sleep_us, timeout_us) \ 458 readx_poll_timeout(stm32_adc_readl_addr, reg, val, \ 459 cond, sleep_us, timeout_us) 460 461 static u16 stm32_adc_readw(struct stm32_adc *adc, u32 reg) 462 { 463 return readw_relaxed(adc->common->base + adc->offset + reg); 464 } 465 466 static void stm32_adc_writel(struct stm32_adc *adc, u32 reg, u32 val) 467 { 468 writel_relaxed(val, adc->common->base + adc->offset + reg); 469 } 470 471 static void stm32_adc_set_bits(struct stm32_adc *adc, u32 reg, u32 bits) 472 { 473 unsigned long flags; 474 475 spin_lock_irqsave(&adc->lock, flags); 476 stm32_adc_writel(adc, reg, stm32_adc_readl(adc, reg) | bits); 477 spin_unlock_irqrestore(&adc->lock, flags); 478 } 479 480 static void stm32_adc_clr_bits(struct stm32_adc *adc, u32 reg, u32 bits) 481 { 482 unsigned long flags; 483 484 spin_lock_irqsave(&adc->lock, flags); 485 stm32_adc_writel(adc, reg, stm32_adc_readl(adc, reg) & ~bits); 486 spin_unlock_irqrestore(&adc->lock, flags); 487 } 488 489 /** 490 * stm32_adc_conv_irq_enable() - Enable end of conversion interrupt 491 * @adc: stm32 adc instance 492 */ 493 static void stm32_adc_conv_irq_enable(struct stm32_adc *adc) 494 { 495 stm32_adc_set_bits(adc, adc->cfg->regs->ier_eoc.reg, 496 adc->cfg->regs->ier_eoc.mask); 497 }; 498 499 /** 500 * stm32_adc_conv_irq_disable() - Disable end of conversion interrupt 501 * @adc: stm32 adc instance 502 */ 503 static void stm32_adc_conv_irq_disable(struct stm32_adc *adc) 504 { 505 stm32_adc_clr_bits(adc, adc->cfg->regs->ier_eoc.reg, 506 adc->cfg->regs->ier_eoc.mask); 507 } 508 509 static void stm32_adc_set_res(struct stm32_adc *adc) 510 { 511 const struct stm32_adc_regs *res = &adc->cfg->regs->res; 512 u32 val; 513 514 val = stm32_adc_readl(adc, res->reg); 515 val = (val & ~res->mask) | (adc->res << res->shift); 516 stm32_adc_writel(adc, res->reg, val); 517 } 518 519 static int stm32_adc_hw_stop(struct device *dev) 520 { 521 struct stm32_adc *adc = dev_get_drvdata(dev); 522 523 if (adc->cfg->unprepare) 524 adc->cfg->unprepare(adc); 525 526 if (adc->clk) 527 clk_disable_unprepare(adc->clk); 528 529 return 0; 530 } 531 532 static int stm32_adc_hw_start(struct device *dev) 533 { 534 struct stm32_adc *adc = dev_get_drvdata(dev); 535 int ret; 536 537 if (adc->clk) { 538 ret = clk_prepare_enable(adc->clk); 539 if (ret) 540 return ret; 541 } 542 543 stm32_adc_set_res(adc); 544 545 if (adc->cfg->prepare) { 546 ret = adc->cfg->prepare(adc); 547 if (ret) 548 goto err_clk_dis; 549 } 550 551 return 0; 552 553 err_clk_dis: 554 if (adc->clk) 555 clk_disable_unprepare(adc->clk); 556 557 return ret; 558 } 559 560 /** 561 * stm32f4_adc_start_conv() - Start conversions for regular channels. 562 * @adc: stm32 adc instance 563 * @dma: use dma to transfer conversion result 564 * 565 * Start conversions for regular channels. 566 * Also take care of normal or DMA mode. Circular DMA may be used for regular 567 * conversions, in IIO buffer modes. Otherwise, use ADC interrupt with direct 568 * DR read instead (e.g. read_raw, or triggered buffer mode without DMA). 569 */ 570 static void stm32f4_adc_start_conv(struct stm32_adc *adc, bool dma) 571 { 572 stm32_adc_set_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN); 573 574 if (dma) 575 stm32_adc_set_bits(adc, STM32F4_ADC_CR2, 576 STM32F4_DMA | STM32F4_DDS); 577 578 stm32_adc_set_bits(adc, STM32F4_ADC_CR2, STM32F4_EOCS | STM32F4_ADON); 579 580 /* Wait for Power-up time (tSTAB from datasheet) */ 581 usleep_range(2, 3); 582 583 /* Software start ? (e.g. trigger detection disabled ?) */ 584 if (!(stm32_adc_readl(adc, STM32F4_ADC_CR2) & STM32F4_EXTEN_MASK)) 585 stm32_adc_set_bits(adc, STM32F4_ADC_CR2, STM32F4_SWSTART); 586 } 587 588 static void stm32f4_adc_stop_conv(struct stm32_adc *adc) 589 { 590 stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_EXTEN_MASK); 591 stm32_adc_clr_bits(adc, STM32F4_ADC_SR, STM32F4_STRT); 592 593 stm32_adc_clr_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN); 594 stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, 595 STM32F4_ADON | STM32F4_DMA | STM32F4_DDS); 596 } 597 598 static void stm32h7_adc_start_conv(struct stm32_adc *adc, bool dma) 599 { 600 enum stm32h7_adc_dmngt dmngt; 601 unsigned long flags; 602 u32 val; 603 604 if (dma) 605 dmngt = STM32H7_DMNGT_DMA_CIRC; 606 else 607 dmngt = STM32H7_DMNGT_DR_ONLY; 608 609 spin_lock_irqsave(&adc->lock, flags); 610 val = stm32_adc_readl(adc, STM32H7_ADC_CFGR); 611 val = (val & ~STM32H7_DMNGT_MASK) | (dmngt << STM32H7_DMNGT_SHIFT); 612 stm32_adc_writel(adc, STM32H7_ADC_CFGR, val); 613 spin_unlock_irqrestore(&adc->lock, flags); 614 615 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADSTART); 616 } 617 618 static void stm32h7_adc_stop_conv(struct stm32_adc *adc) 619 { 620 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 621 int ret; 622 u32 val; 623 624 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADSTP); 625 626 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_CR, val, 627 !(val & (STM32H7_ADSTART)), 628 100, STM32_ADC_TIMEOUT_US); 629 if (ret) 630 dev_warn(&indio_dev->dev, "stop failed\n"); 631 632 stm32_adc_clr_bits(adc, STM32H7_ADC_CFGR, STM32H7_DMNGT_MASK); 633 } 634 635 static int stm32h7_adc_exit_pwr_down(struct stm32_adc *adc) 636 { 637 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 638 int ret; 639 u32 val; 640 641 /* Exit deep power down, then enable ADC voltage regulator */ 642 stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD); 643 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADVREGEN); 644 645 if (adc->common->rate > STM32H7_BOOST_CLKRATE) 646 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST); 647 648 /* Wait for startup time */ 649 if (!adc->cfg->has_vregready) { 650 usleep_range(10, 20); 651 return 0; 652 } 653 654 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val, 655 val & STM32MP1_VREGREADY, 100, 656 STM32_ADC_TIMEOUT_US); 657 if (ret) { 658 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD); 659 dev_err(&indio_dev->dev, "Failed to exit power down\n"); 660 } 661 662 return ret; 663 } 664 665 static void stm32h7_adc_enter_pwr_down(struct stm32_adc *adc) 666 { 667 stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_BOOST); 668 669 /* Setting DEEPPWD disables ADC vreg and clears ADVREGEN */ 670 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_DEEPPWD); 671 } 672 673 static int stm32h7_adc_enable(struct stm32_adc *adc) 674 { 675 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 676 int ret; 677 u32 val; 678 679 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADEN); 680 681 /* Poll for ADRDY to be set (after adc startup time) */ 682 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_ISR, val, 683 val & STM32H7_ADRDY, 684 100, STM32_ADC_TIMEOUT_US); 685 if (ret) { 686 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADDIS); 687 dev_err(&indio_dev->dev, "Failed to enable ADC\n"); 688 } else { 689 /* Clear ADRDY by writing one */ 690 stm32_adc_set_bits(adc, STM32H7_ADC_ISR, STM32H7_ADRDY); 691 } 692 693 return ret; 694 } 695 696 static void stm32h7_adc_disable(struct stm32_adc *adc) 697 { 698 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 699 int ret; 700 u32 val; 701 702 /* Disable ADC and wait until it's effectively disabled */ 703 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADDIS); 704 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_CR, val, 705 !(val & STM32H7_ADEN), 100, 706 STM32_ADC_TIMEOUT_US); 707 if (ret) 708 dev_warn(&indio_dev->dev, "Failed to disable\n"); 709 } 710 711 /** 712 * stm32h7_adc_read_selfcalib() - read calibration shadow regs, save result 713 * @adc: stm32 adc instance 714 * Note: Must be called once ADC is enabled, so LINCALRDYW[1..6] are writable 715 */ 716 static int stm32h7_adc_read_selfcalib(struct stm32_adc *adc) 717 { 718 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 719 int i, ret; 720 u32 lincalrdyw_mask, val; 721 722 /* Read linearity calibration */ 723 lincalrdyw_mask = STM32H7_LINCALRDYW6; 724 for (i = STM32H7_LINCALFACT_NUM - 1; i >= 0; i--) { 725 /* Clear STM32H7_LINCALRDYW[6..1]: transfer calib to CALFACT2 */ 726 stm32_adc_clr_bits(adc, STM32H7_ADC_CR, lincalrdyw_mask); 727 728 /* Poll: wait calib data to be ready in CALFACT2 register */ 729 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_CR, val, 730 !(val & lincalrdyw_mask), 731 100, STM32_ADC_TIMEOUT_US); 732 if (ret) { 733 dev_err(&indio_dev->dev, "Failed to read calfact\n"); 734 return ret; 735 } 736 737 val = stm32_adc_readl(adc, STM32H7_ADC_CALFACT2); 738 adc->cal.lincalfact[i] = (val & STM32H7_LINCALFACT_MASK); 739 adc->cal.lincalfact[i] >>= STM32H7_LINCALFACT_SHIFT; 740 741 lincalrdyw_mask >>= 1; 742 } 743 744 /* Read offset calibration */ 745 val = stm32_adc_readl(adc, STM32H7_ADC_CALFACT); 746 adc->cal.calfact_s = (val & STM32H7_CALFACT_S_MASK); 747 adc->cal.calfact_s >>= STM32H7_CALFACT_S_SHIFT; 748 adc->cal.calfact_d = (val & STM32H7_CALFACT_D_MASK); 749 adc->cal.calfact_d >>= STM32H7_CALFACT_D_SHIFT; 750 adc->cal.calibrated = true; 751 752 return 0; 753 } 754 755 /** 756 * stm32h7_adc_restore_selfcalib() - Restore saved self-calibration result 757 * @adc: stm32 adc instance 758 * Note: ADC must be enabled, with no on-going conversions. 759 */ 760 static int stm32h7_adc_restore_selfcalib(struct stm32_adc *adc) 761 { 762 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 763 int i, ret; 764 u32 lincalrdyw_mask, val; 765 766 val = (adc->cal.calfact_s << STM32H7_CALFACT_S_SHIFT) | 767 (adc->cal.calfact_d << STM32H7_CALFACT_D_SHIFT); 768 stm32_adc_writel(adc, STM32H7_ADC_CALFACT, val); 769 770 lincalrdyw_mask = STM32H7_LINCALRDYW6; 771 for (i = STM32H7_LINCALFACT_NUM - 1; i >= 0; i--) { 772 /* 773 * Write saved calibration data to shadow registers: 774 * Write CALFACT2, and set LINCALRDYW[6..1] bit to trigger 775 * data write. Then poll to wait for complete transfer. 776 */ 777 val = adc->cal.lincalfact[i] << STM32H7_LINCALFACT_SHIFT; 778 stm32_adc_writel(adc, STM32H7_ADC_CALFACT2, val); 779 stm32_adc_set_bits(adc, STM32H7_ADC_CR, lincalrdyw_mask); 780 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_CR, val, 781 val & lincalrdyw_mask, 782 100, STM32_ADC_TIMEOUT_US); 783 if (ret) { 784 dev_err(&indio_dev->dev, "Failed to write calfact\n"); 785 return ret; 786 } 787 788 /* 789 * Read back calibration data, has two effects: 790 * - It ensures bits LINCALRDYW[6..1] are kept cleared 791 * for next time calibration needs to be restored. 792 * - BTW, bit clear triggers a read, then check data has been 793 * correctly written. 794 */ 795 stm32_adc_clr_bits(adc, STM32H7_ADC_CR, lincalrdyw_mask); 796 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_CR, val, 797 !(val & lincalrdyw_mask), 798 100, STM32_ADC_TIMEOUT_US); 799 if (ret) { 800 dev_err(&indio_dev->dev, "Failed to read calfact\n"); 801 return ret; 802 } 803 val = stm32_adc_readl(adc, STM32H7_ADC_CALFACT2); 804 if (val != adc->cal.lincalfact[i] << STM32H7_LINCALFACT_SHIFT) { 805 dev_err(&indio_dev->dev, "calfact not consistent\n"); 806 return -EIO; 807 } 808 809 lincalrdyw_mask >>= 1; 810 } 811 812 return 0; 813 } 814 815 /** 816 * Fixed timeout value for ADC calibration. 817 * worst cases: 818 * - low clock frequency 819 * - maximum prescalers 820 * Calibration requires: 821 * - 131,072 ADC clock cycle for the linear calibration 822 * - 20 ADC clock cycle for the offset calibration 823 * 824 * Set to 100ms for now 825 */ 826 #define STM32H7_ADC_CALIB_TIMEOUT_US 100000 827 828 /** 829 * stm32h7_adc_selfcalib() - Procedure to calibrate ADC 830 * @adc: stm32 adc instance 831 * Note: Must be called once ADC is out of power down. 832 */ 833 static int stm32h7_adc_selfcalib(struct stm32_adc *adc) 834 { 835 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 836 int ret; 837 u32 val; 838 839 if (adc->cal.calibrated) 840 return true; 841 842 /* 843 * Select calibration mode: 844 * - Offset calibration for single ended inputs 845 * - No linearity calibration (do it later, before reading it) 846 */ 847 stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_ADCALDIF); 848 stm32_adc_clr_bits(adc, STM32H7_ADC_CR, STM32H7_ADCALLIN); 849 850 /* Start calibration, then wait for completion */ 851 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADCAL); 852 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_CR, val, 853 !(val & STM32H7_ADCAL), 100, 854 STM32H7_ADC_CALIB_TIMEOUT_US); 855 if (ret) { 856 dev_err(&indio_dev->dev, "calibration failed\n"); 857 goto out; 858 } 859 860 /* 861 * Select calibration mode, then start calibration: 862 * - Offset calibration for differential input 863 * - Linearity calibration (needs to be done only once for single/diff) 864 * will run simultaneously with offset calibration. 865 */ 866 stm32_adc_set_bits(adc, STM32H7_ADC_CR, 867 STM32H7_ADCALDIF | STM32H7_ADCALLIN); 868 stm32_adc_set_bits(adc, STM32H7_ADC_CR, STM32H7_ADCAL); 869 ret = stm32_adc_readl_poll_timeout(STM32H7_ADC_CR, val, 870 !(val & STM32H7_ADCAL), 100, 871 STM32H7_ADC_CALIB_TIMEOUT_US); 872 if (ret) { 873 dev_err(&indio_dev->dev, "calibration failed\n"); 874 goto out; 875 } 876 877 out: 878 stm32_adc_clr_bits(adc, STM32H7_ADC_CR, 879 STM32H7_ADCALDIF | STM32H7_ADCALLIN); 880 881 return ret; 882 } 883 884 /** 885 * stm32h7_adc_prepare() - Leave power down mode to enable ADC. 886 * @adc: stm32 adc instance 887 * Leave power down mode. 888 * Configure channels as single ended or differential before enabling ADC. 889 * Enable ADC. 890 * Restore calibration data. 891 * Pre-select channels that may be used in PCSEL (required by input MUX / IO): 892 * - Only one input is selected for single ended (e.g. 'vinp') 893 * - Two inputs are selected for differential channels (e.g. 'vinp' & 'vinn') 894 */ 895 static int stm32h7_adc_prepare(struct stm32_adc *adc) 896 { 897 int calib, ret; 898 899 ret = stm32h7_adc_exit_pwr_down(adc); 900 if (ret) 901 return ret; 902 903 ret = stm32h7_adc_selfcalib(adc); 904 if (ret < 0) 905 goto pwr_dwn; 906 calib = ret; 907 908 stm32_adc_writel(adc, STM32H7_ADC_DIFSEL, adc->difsel); 909 910 ret = stm32h7_adc_enable(adc); 911 if (ret) 912 goto pwr_dwn; 913 914 /* Either restore or read calibration result for future reference */ 915 if (calib) 916 ret = stm32h7_adc_restore_selfcalib(adc); 917 else 918 ret = stm32h7_adc_read_selfcalib(adc); 919 if (ret) 920 goto disable; 921 922 stm32_adc_writel(adc, STM32H7_ADC_PCSEL, adc->pcsel); 923 924 return 0; 925 926 disable: 927 stm32h7_adc_disable(adc); 928 pwr_dwn: 929 stm32h7_adc_enter_pwr_down(adc); 930 931 return ret; 932 } 933 934 static void stm32h7_adc_unprepare(struct stm32_adc *adc) 935 { 936 stm32h7_adc_disable(adc); 937 stm32h7_adc_enter_pwr_down(adc); 938 } 939 940 /** 941 * stm32_adc_conf_scan_seq() - Build regular channels scan sequence 942 * @indio_dev: IIO device 943 * @scan_mask: channels to be converted 944 * 945 * Conversion sequence : 946 * Apply sampling time settings for all channels. 947 * Configure ADC scan sequence based on selected channels in scan_mask. 948 * Add channels to SQR registers, from scan_mask LSB to MSB, then 949 * program sequence len. 950 */ 951 static int stm32_adc_conf_scan_seq(struct iio_dev *indio_dev, 952 const unsigned long *scan_mask) 953 { 954 struct stm32_adc *adc = iio_priv(indio_dev); 955 const struct stm32_adc_regs *sqr = adc->cfg->regs->sqr; 956 const struct iio_chan_spec *chan; 957 u32 val, bit; 958 int i = 0; 959 960 /* Apply sampling time settings */ 961 stm32_adc_writel(adc, adc->cfg->regs->smpr[0], adc->smpr_val[0]); 962 stm32_adc_writel(adc, adc->cfg->regs->smpr[1], adc->smpr_val[1]); 963 964 for_each_set_bit(bit, scan_mask, indio_dev->masklength) { 965 chan = indio_dev->channels + bit; 966 /* 967 * Assign one channel per SQ entry in regular 968 * sequence, starting with SQ1. 969 */ 970 i++; 971 if (i > STM32_ADC_MAX_SQ) 972 return -EINVAL; 973 974 dev_dbg(&indio_dev->dev, "%s chan %d to SQ%d\n", 975 __func__, chan->channel, i); 976 977 val = stm32_adc_readl(adc, sqr[i].reg); 978 val &= ~sqr[i].mask; 979 val |= chan->channel << sqr[i].shift; 980 stm32_adc_writel(adc, sqr[i].reg, val); 981 } 982 983 if (!i) 984 return -EINVAL; 985 986 /* Sequence len */ 987 val = stm32_adc_readl(adc, sqr[0].reg); 988 val &= ~sqr[0].mask; 989 val |= ((i - 1) << sqr[0].shift); 990 stm32_adc_writel(adc, sqr[0].reg, val); 991 992 return 0; 993 } 994 995 /** 996 * stm32_adc_get_trig_extsel() - Get external trigger selection 997 * @indio_dev: IIO device structure 998 * @trig: trigger 999 * 1000 * Returns trigger extsel value, if trig matches, -EINVAL otherwise. 1001 */ 1002 static int stm32_adc_get_trig_extsel(struct iio_dev *indio_dev, 1003 struct iio_trigger *trig) 1004 { 1005 struct stm32_adc *adc = iio_priv(indio_dev); 1006 int i; 1007 1008 /* lookup triggers registered by stm32 timer trigger driver */ 1009 for (i = 0; adc->cfg->trigs[i].name; i++) { 1010 /** 1011 * Checking both stm32 timer trigger type and trig name 1012 * should be safe against arbitrary trigger names. 1013 */ 1014 if ((is_stm32_timer_trigger(trig) || 1015 is_stm32_lptim_trigger(trig)) && 1016 !strcmp(adc->cfg->trigs[i].name, trig->name)) { 1017 return adc->cfg->trigs[i].extsel; 1018 } 1019 } 1020 1021 return -EINVAL; 1022 } 1023 1024 /** 1025 * stm32_adc_set_trig() - Set a regular trigger 1026 * @indio_dev: IIO device 1027 * @trig: IIO trigger 1028 * 1029 * Set trigger source/polarity (e.g. SW, or HW with polarity) : 1030 * - if HW trigger disabled (e.g. trig == NULL, conversion launched by sw) 1031 * - if HW trigger enabled, set source & polarity 1032 */ 1033 static int stm32_adc_set_trig(struct iio_dev *indio_dev, 1034 struct iio_trigger *trig) 1035 { 1036 struct stm32_adc *adc = iio_priv(indio_dev); 1037 u32 val, extsel = 0, exten = STM32_EXTEN_SWTRIG; 1038 unsigned long flags; 1039 int ret; 1040 1041 if (trig) { 1042 ret = stm32_adc_get_trig_extsel(indio_dev, trig); 1043 if (ret < 0) 1044 return ret; 1045 1046 /* set trigger source and polarity (default to rising edge) */ 1047 extsel = ret; 1048 exten = adc->trigger_polarity + STM32_EXTEN_HWTRIG_RISING_EDGE; 1049 } 1050 1051 spin_lock_irqsave(&adc->lock, flags); 1052 val = stm32_adc_readl(adc, adc->cfg->regs->exten.reg); 1053 val &= ~(adc->cfg->regs->exten.mask | adc->cfg->regs->extsel.mask); 1054 val |= exten << adc->cfg->regs->exten.shift; 1055 val |= extsel << adc->cfg->regs->extsel.shift; 1056 stm32_adc_writel(adc, adc->cfg->regs->exten.reg, val); 1057 spin_unlock_irqrestore(&adc->lock, flags); 1058 1059 return 0; 1060 } 1061 1062 static int stm32_adc_set_trig_pol(struct iio_dev *indio_dev, 1063 const struct iio_chan_spec *chan, 1064 unsigned int type) 1065 { 1066 struct stm32_adc *adc = iio_priv(indio_dev); 1067 1068 adc->trigger_polarity = type; 1069 1070 return 0; 1071 } 1072 1073 static int stm32_adc_get_trig_pol(struct iio_dev *indio_dev, 1074 const struct iio_chan_spec *chan) 1075 { 1076 struct stm32_adc *adc = iio_priv(indio_dev); 1077 1078 return adc->trigger_polarity; 1079 } 1080 1081 static const char * const stm32_trig_pol_items[] = { 1082 "rising-edge", "falling-edge", "both-edges", 1083 }; 1084 1085 static const struct iio_enum stm32_adc_trig_pol = { 1086 .items = stm32_trig_pol_items, 1087 .num_items = ARRAY_SIZE(stm32_trig_pol_items), 1088 .get = stm32_adc_get_trig_pol, 1089 .set = stm32_adc_set_trig_pol, 1090 }; 1091 1092 /** 1093 * stm32_adc_single_conv() - Performs a single conversion 1094 * @indio_dev: IIO device 1095 * @chan: IIO channel 1096 * @res: conversion result 1097 * 1098 * The function performs a single conversion on a given channel: 1099 * - Apply sampling time settings 1100 * - Program sequencer with one channel (e.g. in SQ1 with len = 1) 1101 * - Use SW trigger 1102 * - Start conversion, then wait for interrupt completion. 1103 */ 1104 static int stm32_adc_single_conv(struct iio_dev *indio_dev, 1105 const struct iio_chan_spec *chan, 1106 int *res) 1107 { 1108 struct stm32_adc *adc = iio_priv(indio_dev); 1109 struct device *dev = indio_dev->dev.parent; 1110 const struct stm32_adc_regspec *regs = adc->cfg->regs; 1111 long timeout; 1112 u32 val; 1113 int ret; 1114 1115 reinit_completion(&adc->completion); 1116 1117 adc->bufi = 0; 1118 1119 ret = pm_runtime_get_sync(dev); 1120 if (ret < 0) { 1121 pm_runtime_put_noidle(dev); 1122 return ret; 1123 } 1124 1125 /* Apply sampling time settings */ 1126 stm32_adc_writel(adc, regs->smpr[0], adc->smpr_val[0]); 1127 stm32_adc_writel(adc, regs->smpr[1], adc->smpr_val[1]); 1128 1129 /* Program chan number in regular sequence (SQ1) */ 1130 val = stm32_adc_readl(adc, regs->sqr[1].reg); 1131 val &= ~regs->sqr[1].mask; 1132 val |= chan->channel << regs->sqr[1].shift; 1133 stm32_adc_writel(adc, regs->sqr[1].reg, val); 1134 1135 /* Set regular sequence len (0 for 1 conversion) */ 1136 stm32_adc_clr_bits(adc, regs->sqr[0].reg, regs->sqr[0].mask); 1137 1138 /* Trigger detection disabled (conversion can be launched in SW) */ 1139 stm32_adc_clr_bits(adc, regs->exten.reg, regs->exten.mask); 1140 1141 stm32_adc_conv_irq_enable(adc); 1142 1143 adc->cfg->start_conv(adc, false); 1144 1145 timeout = wait_for_completion_interruptible_timeout( 1146 &adc->completion, STM32_ADC_TIMEOUT); 1147 if (timeout == 0) { 1148 ret = -ETIMEDOUT; 1149 } else if (timeout < 0) { 1150 ret = timeout; 1151 } else { 1152 *res = adc->buffer[0]; 1153 ret = IIO_VAL_INT; 1154 } 1155 1156 adc->cfg->stop_conv(adc); 1157 1158 stm32_adc_conv_irq_disable(adc); 1159 1160 pm_runtime_mark_last_busy(dev); 1161 pm_runtime_put_autosuspend(dev); 1162 1163 return ret; 1164 } 1165 1166 static int stm32_adc_read_raw(struct iio_dev *indio_dev, 1167 struct iio_chan_spec const *chan, 1168 int *val, int *val2, long mask) 1169 { 1170 struct stm32_adc *adc = iio_priv(indio_dev); 1171 int ret; 1172 1173 switch (mask) { 1174 case IIO_CHAN_INFO_RAW: 1175 ret = iio_device_claim_direct_mode(indio_dev); 1176 if (ret) 1177 return ret; 1178 if (chan->type == IIO_VOLTAGE) 1179 ret = stm32_adc_single_conv(indio_dev, chan, val); 1180 else 1181 ret = -EINVAL; 1182 iio_device_release_direct_mode(indio_dev); 1183 return ret; 1184 1185 case IIO_CHAN_INFO_SCALE: 1186 if (chan->differential) { 1187 *val = adc->common->vref_mv * 2; 1188 *val2 = chan->scan_type.realbits; 1189 } else { 1190 *val = adc->common->vref_mv; 1191 *val2 = chan->scan_type.realbits; 1192 } 1193 return IIO_VAL_FRACTIONAL_LOG2; 1194 1195 case IIO_CHAN_INFO_OFFSET: 1196 if (chan->differential) 1197 /* ADC_full_scale / 2 */ 1198 *val = -((1 << chan->scan_type.realbits) / 2); 1199 else 1200 *val = 0; 1201 return IIO_VAL_INT; 1202 1203 default: 1204 return -EINVAL; 1205 } 1206 } 1207 1208 static irqreturn_t stm32_adc_isr(int irq, void *data) 1209 { 1210 struct stm32_adc *adc = data; 1211 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 1212 const struct stm32_adc_regspec *regs = adc->cfg->regs; 1213 u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg); 1214 1215 if (status & regs->isr_eoc.mask) { 1216 /* Reading DR also clears EOC status flag */ 1217 adc->buffer[adc->bufi] = stm32_adc_readw(adc, regs->dr); 1218 if (iio_buffer_enabled(indio_dev)) { 1219 adc->bufi++; 1220 if (adc->bufi >= adc->num_conv) { 1221 stm32_adc_conv_irq_disable(adc); 1222 iio_trigger_poll(indio_dev->trig); 1223 } 1224 } else { 1225 complete(&adc->completion); 1226 } 1227 return IRQ_HANDLED; 1228 } 1229 1230 return IRQ_NONE; 1231 } 1232 1233 /** 1234 * stm32_adc_validate_trigger() - validate trigger for stm32 adc 1235 * @indio_dev: IIO device 1236 * @trig: new trigger 1237 * 1238 * Returns: 0 if trig matches one of the triggers registered by stm32 adc 1239 * driver, -EINVAL otherwise. 1240 */ 1241 static int stm32_adc_validate_trigger(struct iio_dev *indio_dev, 1242 struct iio_trigger *trig) 1243 { 1244 return stm32_adc_get_trig_extsel(indio_dev, trig) < 0 ? -EINVAL : 0; 1245 } 1246 1247 static int stm32_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val) 1248 { 1249 struct stm32_adc *adc = iio_priv(indio_dev); 1250 unsigned int watermark = STM32_DMA_BUFFER_SIZE / 2; 1251 unsigned int rx_buf_sz = STM32_DMA_BUFFER_SIZE; 1252 1253 /* 1254 * dma cyclic transfers are used, buffer is split into two periods. 1255 * There should be : 1256 * - always one buffer (period) dma is working on 1257 * - one buffer (period) driver can push with iio_trigger_poll(). 1258 */ 1259 watermark = min(watermark, val * (unsigned)(sizeof(u16))); 1260 adc->rx_buf_sz = min(rx_buf_sz, watermark * 2 * adc->num_conv); 1261 1262 return 0; 1263 } 1264 1265 static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev, 1266 const unsigned long *scan_mask) 1267 { 1268 struct stm32_adc *adc = iio_priv(indio_dev); 1269 struct device *dev = indio_dev->dev.parent; 1270 int ret; 1271 1272 ret = pm_runtime_get_sync(dev); 1273 if (ret < 0) { 1274 pm_runtime_put_noidle(dev); 1275 return ret; 1276 } 1277 1278 adc->num_conv = bitmap_weight(scan_mask, indio_dev->masklength); 1279 1280 ret = stm32_adc_conf_scan_seq(indio_dev, scan_mask); 1281 pm_runtime_mark_last_busy(dev); 1282 pm_runtime_put_autosuspend(dev); 1283 1284 return ret; 1285 } 1286 1287 static int stm32_adc_of_xlate(struct iio_dev *indio_dev, 1288 const struct of_phandle_args *iiospec) 1289 { 1290 int i; 1291 1292 for (i = 0; i < indio_dev->num_channels; i++) 1293 if (indio_dev->channels[i].channel == iiospec->args[0]) 1294 return i; 1295 1296 return -EINVAL; 1297 } 1298 1299 /** 1300 * stm32_adc_debugfs_reg_access - read or write register value 1301 * @indio_dev: IIO device structure 1302 * @reg: register offset 1303 * @writeval: value to write 1304 * @readval: value to read 1305 * 1306 * To read a value from an ADC register: 1307 * echo [ADC reg offset] > direct_reg_access 1308 * cat direct_reg_access 1309 * 1310 * To write a value in a ADC register: 1311 * echo [ADC_reg_offset] [value] > direct_reg_access 1312 */ 1313 static int stm32_adc_debugfs_reg_access(struct iio_dev *indio_dev, 1314 unsigned reg, unsigned writeval, 1315 unsigned *readval) 1316 { 1317 struct stm32_adc *adc = iio_priv(indio_dev); 1318 struct device *dev = indio_dev->dev.parent; 1319 int ret; 1320 1321 ret = pm_runtime_get_sync(dev); 1322 if (ret < 0) { 1323 pm_runtime_put_noidle(dev); 1324 return ret; 1325 } 1326 1327 if (!readval) 1328 stm32_adc_writel(adc, reg, writeval); 1329 else 1330 *readval = stm32_adc_readl(adc, reg); 1331 1332 pm_runtime_mark_last_busy(dev); 1333 pm_runtime_put_autosuspend(dev); 1334 1335 return 0; 1336 } 1337 1338 static const struct iio_info stm32_adc_iio_info = { 1339 .read_raw = stm32_adc_read_raw, 1340 .validate_trigger = stm32_adc_validate_trigger, 1341 .hwfifo_set_watermark = stm32_adc_set_watermark, 1342 .update_scan_mode = stm32_adc_update_scan_mode, 1343 .debugfs_reg_access = stm32_adc_debugfs_reg_access, 1344 .of_xlate = stm32_adc_of_xlate, 1345 }; 1346 1347 static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc) 1348 { 1349 struct dma_tx_state state; 1350 enum dma_status status; 1351 1352 status = dmaengine_tx_status(adc->dma_chan, 1353 adc->dma_chan->cookie, 1354 &state); 1355 if (status == DMA_IN_PROGRESS) { 1356 /* Residue is size in bytes from end of buffer */ 1357 unsigned int i = adc->rx_buf_sz - state.residue; 1358 unsigned int size; 1359 1360 /* Return available bytes */ 1361 if (i >= adc->bufi) 1362 size = i - adc->bufi; 1363 else 1364 size = adc->rx_buf_sz + i - adc->bufi; 1365 1366 return size; 1367 } 1368 1369 return 0; 1370 } 1371 1372 static void stm32_adc_dma_buffer_done(void *data) 1373 { 1374 struct iio_dev *indio_dev = data; 1375 1376 iio_trigger_poll_chained(indio_dev->trig); 1377 } 1378 1379 static int stm32_adc_dma_start(struct iio_dev *indio_dev) 1380 { 1381 struct stm32_adc *adc = iio_priv(indio_dev); 1382 struct dma_async_tx_descriptor *desc; 1383 dma_cookie_t cookie; 1384 int ret; 1385 1386 if (!adc->dma_chan) 1387 return 0; 1388 1389 dev_dbg(&indio_dev->dev, "%s size=%d watermark=%d\n", __func__, 1390 adc->rx_buf_sz, adc->rx_buf_sz / 2); 1391 1392 /* Prepare a DMA cyclic transaction */ 1393 desc = dmaengine_prep_dma_cyclic(adc->dma_chan, 1394 adc->rx_dma_buf, 1395 adc->rx_buf_sz, adc->rx_buf_sz / 2, 1396 DMA_DEV_TO_MEM, 1397 DMA_PREP_INTERRUPT); 1398 if (!desc) 1399 return -EBUSY; 1400 1401 desc->callback = stm32_adc_dma_buffer_done; 1402 desc->callback_param = indio_dev; 1403 1404 cookie = dmaengine_submit(desc); 1405 ret = dma_submit_error(cookie); 1406 if (ret) { 1407 dmaengine_terminate_sync(adc->dma_chan); 1408 return ret; 1409 } 1410 1411 /* Issue pending DMA requests */ 1412 dma_async_issue_pending(adc->dma_chan); 1413 1414 return 0; 1415 } 1416 1417 static int __stm32_adc_buffer_postenable(struct iio_dev *indio_dev) 1418 { 1419 struct stm32_adc *adc = iio_priv(indio_dev); 1420 struct device *dev = indio_dev->dev.parent; 1421 int ret; 1422 1423 ret = pm_runtime_get_sync(dev); 1424 if (ret < 0) { 1425 pm_runtime_put_noidle(dev); 1426 return ret; 1427 } 1428 1429 ret = stm32_adc_set_trig(indio_dev, indio_dev->trig); 1430 if (ret) { 1431 dev_err(&indio_dev->dev, "Can't set trigger\n"); 1432 goto err_pm_put; 1433 } 1434 1435 ret = stm32_adc_dma_start(indio_dev); 1436 if (ret) { 1437 dev_err(&indio_dev->dev, "Can't start dma\n"); 1438 goto err_clr_trig; 1439 } 1440 1441 /* Reset adc buffer index */ 1442 adc->bufi = 0; 1443 1444 if (!adc->dma_chan) 1445 stm32_adc_conv_irq_enable(adc); 1446 1447 adc->cfg->start_conv(adc, !!adc->dma_chan); 1448 1449 return 0; 1450 1451 err_clr_trig: 1452 stm32_adc_set_trig(indio_dev, NULL); 1453 err_pm_put: 1454 pm_runtime_mark_last_busy(dev); 1455 pm_runtime_put_autosuspend(dev); 1456 1457 return ret; 1458 } 1459 1460 static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev) 1461 { 1462 int ret; 1463 1464 ret = iio_triggered_buffer_postenable(indio_dev); 1465 if (ret < 0) 1466 return ret; 1467 1468 ret = __stm32_adc_buffer_postenable(indio_dev); 1469 if (ret < 0) 1470 iio_triggered_buffer_predisable(indio_dev); 1471 1472 return ret; 1473 } 1474 1475 static void __stm32_adc_buffer_predisable(struct iio_dev *indio_dev) 1476 { 1477 struct stm32_adc *adc = iio_priv(indio_dev); 1478 struct device *dev = indio_dev->dev.parent; 1479 1480 adc->cfg->stop_conv(adc); 1481 if (!adc->dma_chan) 1482 stm32_adc_conv_irq_disable(adc); 1483 1484 if (adc->dma_chan) 1485 dmaengine_terminate_sync(adc->dma_chan); 1486 1487 if (stm32_adc_set_trig(indio_dev, NULL)) 1488 dev_err(&indio_dev->dev, "Can't clear trigger\n"); 1489 1490 pm_runtime_mark_last_busy(dev); 1491 pm_runtime_put_autosuspend(dev); 1492 } 1493 1494 static int stm32_adc_buffer_predisable(struct iio_dev *indio_dev) 1495 { 1496 int ret; 1497 1498 __stm32_adc_buffer_predisable(indio_dev); 1499 1500 ret = iio_triggered_buffer_predisable(indio_dev); 1501 if (ret < 0) 1502 dev_err(&indio_dev->dev, "predisable failed\n"); 1503 1504 return ret; 1505 } 1506 1507 static const struct iio_buffer_setup_ops stm32_adc_buffer_setup_ops = { 1508 .postenable = &stm32_adc_buffer_postenable, 1509 .predisable = &stm32_adc_buffer_predisable, 1510 }; 1511 1512 static irqreturn_t stm32_adc_trigger_handler(int irq, void *p) 1513 { 1514 struct iio_poll_func *pf = p; 1515 struct iio_dev *indio_dev = pf->indio_dev; 1516 struct stm32_adc *adc = iio_priv(indio_dev); 1517 1518 dev_dbg(&indio_dev->dev, "%s bufi=%d\n", __func__, adc->bufi); 1519 1520 if (!adc->dma_chan) { 1521 /* reset buffer index */ 1522 adc->bufi = 0; 1523 iio_push_to_buffers_with_timestamp(indio_dev, adc->buffer, 1524 pf->timestamp); 1525 } else { 1526 int residue = stm32_adc_dma_residue(adc); 1527 1528 while (residue >= indio_dev->scan_bytes) { 1529 u16 *buffer = (u16 *)&adc->rx_buf[adc->bufi]; 1530 1531 iio_push_to_buffers_with_timestamp(indio_dev, buffer, 1532 pf->timestamp); 1533 residue -= indio_dev->scan_bytes; 1534 adc->bufi += indio_dev->scan_bytes; 1535 if (adc->bufi >= adc->rx_buf_sz) 1536 adc->bufi = 0; 1537 } 1538 } 1539 1540 iio_trigger_notify_done(indio_dev->trig); 1541 1542 /* re-enable eoc irq */ 1543 if (!adc->dma_chan) 1544 stm32_adc_conv_irq_enable(adc); 1545 1546 return IRQ_HANDLED; 1547 } 1548 1549 static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = { 1550 IIO_ENUM("trigger_polarity", IIO_SHARED_BY_ALL, &stm32_adc_trig_pol), 1551 { 1552 .name = "trigger_polarity_available", 1553 .shared = IIO_SHARED_BY_ALL, 1554 .read = iio_enum_available_read, 1555 .private = (uintptr_t)&stm32_adc_trig_pol, 1556 }, 1557 {}, 1558 }; 1559 1560 static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev) 1561 { 1562 struct device_node *node = indio_dev->dev.of_node; 1563 struct stm32_adc *adc = iio_priv(indio_dev); 1564 unsigned int i; 1565 u32 res; 1566 1567 if (of_property_read_u32(node, "assigned-resolution-bits", &res)) 1568 res = adc->cfg->adc_info->resolutions[0]; 1569 1570 for (i = 0; i < adc->cfg->adc_info->num_res; i++) 1571 if (res == adc->cfg->adc_info->resolutions[i]) 1572 break; 1573 if (i >= adc->cfg->adc_info->num_res) { 1574 dev_err(&indio_dev->dev, "Bad resolution: %u bits\n", res); 1575 return -EINVAL; 1576 } 1577 1578 dev_dbg(&indio_dev->dev, "Using %u bits resolution\n", res); 1579 adc->res = i; 1580 1581 return 0; 1582 } 1583 1584 static void stm32_adc_smpr_init(struct stm32_adc *adc, int channel, u32 smp_ns) 1585 { 1586 const struct stm32_adc_regs *smpr = &adc->cfg->regs->smp_bits[channel]; 1587 u32 period_ns, shift = smpr->shift, mask = smpr->mask; 1588 unsigned int smp, r = smpr->reg; 1589 1590 /* Determine sampling time (ADC clock cycles) */ 1591 period_ns = NSEC_PER_SEC / adc->common->rate; 1592 for (smp = 0; smp <= STM32_ADC_MAX_SMP; smp++) 1593 if ((period_ns * adc->cfg->smp_cycles[smp]) >= smp_ns) 1594 break; 1595 if (smp > STM32_ADC_MAX_SMP) 1596 smp = STM32_ADC_MAX_SMP; 1597 1598 /* pre-build sampling time registers (e.g. smpr1, smpr2) */ 1599 adc->smpr_val[r] = (adc->smpr_val[r] & ~mask) | (smp << shift); 1600 } 1601 1602 static void stm32_adc_chan_init_one(struct iio_dev *indio_dev, 1603 struct iio_chan_spec *chan, u32 vinp, 1604 u32 vinn, int scan_index, bool differential) 1605 { 1606 struct stm32_adc *adc = iio_priv(indio_dev); 1607 char *name = adc->chan_name[vinp]; 1608 1609 chan->type = IIO_VOLTAGE; 1610 chan->channel = vinp; 1611 if (differential) { 1612 chan->differential = 1; 1613 chan->channel2 = vinn; 1614 snprintf(name, STM32_ADC_CH_SZ, "in%d-in%d", vinp, vinn); 1615 } else { 1616 snprintf(name, STM32_ADC_CH_SZ, "in%d", vinp); 1617 } 1618 chan->datasheet_name = name; 1619 chan->scan_index = scan_index; 1620 chan->indexed = 1; 1621 chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); 1622 chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | 1623 BIT(IIO_CHAN_INFO_OFFSET); 1624 chan->scan_type.sign = 'u'; 1625 chan->scan_type.realbits = adc->cfg->adc_info->resolutions[adc->res]; 1626 chan->scan_type.storagebits = 16; 1627 chan->ext_info = stm32_adc_ext_info; 1628 1629 /* pre-build selected channels mask */ 1630 adc->pcsel |= BIT(chan->channel); 1631 if (differential) { 1632 /* pre-build diff channels mask */ 1633 adc->difsel |= BIT(chan->channel); 1634 /* Also add negative input to pre-selected channels */ 1635 adc->pcsel |= BIT(chan->channel2); 1636 } 1637 } 1638 1639 static int stm32_adc_chan_of_init(struct iio_dev *indio_dev) 1640 { 1641 struct device_node *node = indio_dev->dev.of_node; 1642 struct stm32_adc *adc = iio_priv(indio_dev); 1643 const struct stm32_adc_info *adc_info = adc->cfg->adc_info; 1644 struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX]; 1645 struct property *prop; 1646 const __be32 *cur; 1647 struct iio_chan_spec *channels; 1648 int scan_index = 0, num_channels = 0, num_diff = 0, ret, i; 1649 u32 val, smp = 0; 1650 1651 ret = of_property_count_u32_elems(node, "st,adc-channels"); 1652 if (ret > adc_info->max_channels) { 1653 dev_err(&indio_dev->dev, "Bad st,adc-channels?\n"); 1654 return -EINVAL; 1655 } else if (ret > 0) { 1656 num_channels += ret; 1657 } 1658 1659 ret = of_property_count_elems_of_size(node, "st,adc-diff-channels", 1660 sizeof(*diff)); 1661 if (ret > adc_info->max_channels) { 1662 dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n"); 1663 return -EINVAL; 1664 } else if (ret > 0) { 1665 int size = ret * sizeof(*diff) / sizeof(u32); 1666 1667 num_diff = ret; 1668 num_channels += ret; 1669 ret = of_property_read_u32_array(node, "st,adc-diff-channels", 1670 (u32 *)diff, size); 1671 if (ret) 1672 return ret; 1673 } 1674 1675 if (!num_channels) { 1676 dev_err(&indio_dev->dev, "No channels configured\n"); 1677 return -ENODATA; 1678 } 1679 1680 /* Optional sample time is provided either for each, or all channels */ 1681 ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs"); 1682 if (ret > 1 && ret != num_channels) { 1683 dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n"); 1684 return -EINVAL; 1685 } 1686 1687 channels = devm_kcalloc(&indio_dev->dev, num_channels, 1688 sizeof(struct iio_chan_spec), GFP_KERNEL); 1689 if (!channels) 1690 return -ENOMEM; 1691 1692 of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) { 1693 if (val >= adc_info->max_channels) { 1694 dev_err(&indio_dev->dev, "Invalid channel %d\n", val); 1695 return -EINVAL; 1696 } 1697 1698 /* Channel can't be configured both as single-ended & diff */ 1699 for (i = 0; i < num_diff; i++) { 1700 if (val == diff[i].vinp) { 1701 dev_err(&indio_dev->dev, 1702 "channel %d miss-configured\n", val); 1703 return -EINVAL; 1704 } 1705 } 1706 stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val, 1707 0, scan_index, false); 1708 scan_index++; 1709 } 1710 1711 for (i = 0; i < num_diff; i++) { 1712 if (diff[i].vinp >= adc_info->max_channels || 1713 diff[i].vinn >= adc_info->max_channels) { 1714 dev_err(&indio_dev->dev, "Invalid channel in%d-in%d\n", 1715 diff[i].vinp, diff[i].vinn); 1716 return -EINVAL; 1717 } 1718 stm32_adc_chan_init_one(indio_dev, &channels[scan_index], 1719 diff[i].vinp, diff[i].vinn, scan_index, 1720 true); 1721 scan_index++; 1722 } 1723 1724 for (i = 0; i < scan_index; i++) { 1725 /* 1726 * Using of_property_read_u32_index(), smp value will only be 1727 * modified if valid u32 value can be decoded. This allows to 1728 * get either no value, 1 shared value for all indexes, or one 1729 * value per channel. 1730 */ 1731 of_property_read_u32_index(node, "st,min-sample-time-nsecs", 1732 i, &smp); 1733 /* Prepare sampling time settings */ 1734 stm32_adc_smpr_init(adc, channels[i].channel, smp); 1735 } 1736 1737 indio_dev->num_channels = scan_index; 1738 indio_dev->channels = channels; 1739 1740 return 0; 1741 } 1742 1743 static int stm32_adc_dma_request(struct iio_dev *indio_dev) 1744 { 1745 struct stm32_adc *adc = iio_priv(indio_dev); 1746 struct dma_slave_config config; 1747 int ret; 1748 1749 adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx"); 1750 if (!adc->dma_chan) 1751 return 0; 1752 1753 adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev, 1754 STM32_DMA_BUFFER_SIZE, 1755 &adc->rx_dma_buf, GFP_KERNEL); 1756 if (!adc->rx_buf) { 1757 ret = -ENOMEM; 1758 goto err_release; 1759 } 1760 1761 /* Configure DMA channel to read data register */ 1762 memset(&config, 0, sizeof(config)); 1763 config.src_addr = (dma_addr_t)adc->common->phys_base; 1764 config.src_addr += adc->offset + adc->cfg->regs->dr; 1765 config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; 1766 1767 ret = dmaengine_slave_config(adc->dma_chan, &config); 1768 if (ret) 1769 goto err_free; 1770 1771 return 0; 1772 1773 err_free: 1774 dma_free_coherent(adc->dma_chan->device->dev, STM32_DMA_BUFFER_SIZE, 1775 adc->rx_buf, adc->rx_dma_buf); 1776 err_release: 1777 dma_release_channel(adc->dma_chan); 1778 1779 return ret; 1780 } 1781 1782 static int stm32_adc_probe(struct platform_device *pdev) 1783 { 1784 struct iio_dev *indio_dev; 1785 struct device *dev = &pdev->dev; 1786 struct stm32_adc *adc; 1787 int ret; 1788 1789 if (!pdev->dev.of_node) 1790 return -ENODEV; 1791 1792 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc)); 1793 if (!indio_dev) 1794 return -ENOMEM; 1795 1796 adc = iio_priv(indio_dev); 1797 adc->common = dev_get_drvdata(pdev->dev.parent); 1798 spin_lock_init(&adc->lock); 1799 init_completion(&adc->completion); 1800 adc->cfg = (const struct stm32_adc_cfg *) 1801 of_match_device(dev->driver->of_match_table, dev)->data; 1802 1803 indio_dev->name = dev_name(&pdev->dev); 1804 indio_dev->dev.parent = &pdev->dev; 1805 indio_dev->dev.of_node = pdev->dev.of_node; 1806 indio_dev->info = &stm32_adc_iio_info; 1807 indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED; 1808 1809 platform_set_drvdata(pdev, adc); 1810 1811 ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset); 1812 if (ret != 0) { 1813 dev_err(&pdev->dev, "missing reg property\n"); 1814 return -EINVAL; 1815 } 1816 1817 adc->irq = platform_get_irq(pdev, 0); 1818 if (adc->irq < 0) 1819 return adc->irq; 1820 1821 ret = devm_request_irq(&pdev->dev, adc->irq, stm32_adc_isr, 1822 0, pdev->name, adc); 1823 if (ret) { 1824 dev_err(&pdev->dev, "failed to request IRQ\n"); 1825 return ret; 1826 } 1827 1828 adc->clk = devm_clk_get(&pdev->dev, NULL); 1829 if (IS_ERR(adc->clk)) { 1830 ret = PTR_ERR(adc->clk); 1831 if (ret == -ENOENT && !adc->cfg->clk_required) { 1832 adc->clk = NULL; 1833 } else { 1834 dev_err(&pdev->dev, "Can't get clock\n"); 1835 return ret; 1836 } 1837 } 1838 1839 ret = stm32_adc_of_get_resolution(indio_dev); 1840 if (ret < 0) 1841 return ret; 1842 1843 ret = stm32_adc_chan_of_init(indio_dev); 1844 if (ret < 0) 1845 return ret; 1846 1847 ret = stm32_adc_dma_request(indio_dev); 1848 if (ret < 0) 1849 return ret; 1850 1851 ret = iio_triggered_buffer_setup(indio_dev, 1852 &iio_pollfunc_store_time, 1853 &stm32_adc_trigger_handler, 1854 &stm32_adc_buffer_setup_ops); 1855 if (ret) { 1856 dev_err(&pdev->dev, "buffer setup failed\n"); 1857 goto err_dma_disable; 1858 } 1859 1860 /* Get stm32-adc-core PM online */ 1861 pm_runtime_get_noresume(dev); 1862 pm_runtime_set_active(dev); 1863 pm_runtime_set_autosuspend_delay(dev, STM32_ADC_HW_STOP_DELAY_MS); 1864 pm_runtime_use_autosuspend(dev); 1865 pm_runtime_enable(dev); 1866 1867 ret = stm32_adc_hw_start(dev); 1868 if (ret) 1869 goto err_buffer_cleanup; 1870 1871 ret = iio_device_register(indio_dev); 1872 if (ret) { 1873 dev_err(&pdev->dev, "iio dev register failed\n"); 1874 goto err_hw_stop; 1875 } 1876 1877 pm_runtime_mark_last_busy(dev); 1878 pm_runtime_put_autosuspend(dev); 1879 1880 return 0; 1881 1882 err_hw_stop: 1883 stm32_adc_hw_stop(dev); 1884 1885 err_buffer_cleanup: 1886 pm_runtime_disable(dev); 1887 pm_runtime_set_suspended(dev); 1888 pm_runtime_put_noidle(dev); 1889 iio_triggered_buffer_cleanup(indio_dev); 1890 1891 err_dma_disable: 1892 if (adc->dma_chan) { 1893 dma_free_coherent(adc->dma_chan->device->dev, 1894 STM32_DMA_BUFFER_SIZE, 1895 adc->rx_buf, adc->rx_dma_buf); 1896 dma_release_channel(adc->dma_chan); 1897 } 1898 1899 return ret; 1900 } 1901 1902 static int stm32_adc_remove(struct platform_device *pdev) 1903 { 1904 struct stm32_adc *adc = platform_get_drvdata(pdev); 1905 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 1906 1907 pm_runtime_get_sync(&pdev->dev); 1908 iio_device_unregister(indio_dev); 1909 stm32_adc_hw_stop(&pdev->dev); 1910 pm_runtime_disable(&pdev->dev); 1911 pm_runtime_set_suspended(&pdev->dev); 1912 pm_runtime_put_noidle(&pdev->dev); 1913 iio_triggered_buffer_cleanup(indio_dev); 1914 if (adc->dma_chan) { 1915 dma_free_coherent(adc->dma_chan->device->dev, 1916 STM32_DMA_BUFFER_SIZE, 1917 adc->rx_buf, adc->rx_dma_buf); 1918 dma_release_channel(adc->dma_chan); 1919 } 1920 1921 return 0; 1922 } 1923 1924 #if defined(CONFIG_PM_SLEEP) 1925 static int stm32_adc_suspend(struct device *dev) 1926 { 1927 struct stm32_adc *adc = dev_get_drvdata(dev); 1928 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 1929 1930 if (iio_buffer_enabled(indio_dev)) 1931 __stm32_adc_buffer_predisable(indio_dev); 1932 1933 return pm_runtime_force_suspend(dev); 1934 } 1935 1936 static int stm32_adc_resume(struct device *dev) 1937 { 1938 struct stm32_adc *adc = dev_get_drvdata(dev); 1939 struct iio_dev *indio_dev = iio_priv_to_dev(adc); 1940 int ret; 1941 1942 ret = pm_runtime_force_resume(dev); 1943 if (ret < 0) 1944 return ret; 1945 1946 if (!iio_buffer_enabled(indio_dev)) 1947 return 0; 1948 1949 ret = stm32_adc_update_scan_mode(indio_dev, 1950 indio_dev->active_scan_mask); 1951 if (ret < 0) 1952 return ret; 1953 1954 return __stm32_adc_buffer_postenable(indio_dev); 1955 } 1956 #endif 1957 1958 #if defined(CONFIG_PM) 1959 static int stm32_adc_runtime_suspend(struct device *dev) 1960 { 1961 return stm32_adc_hw_stop(dev); 1962 } 1963 1964 static int stm32_adc_runtime_resume(struct device *dev) 1965 { 1966 return stm32_adc_hw_start(dev); 1967 } 1968 #endif 1969 1970 static const struct dev_pm_ops stm32_adc_pm_ops = { 1971 SET_SYSTEM_SLEEP_PM_OPS(stm32_adc_suspend, stm32_adc_resume) 1972 SET_RUNTIME_PM_OPS(stm32_adc_runtime_suspend, stm32_adc_runtime_resume, 1973 NULL) 1974 }; 1975 1976 static const struct stm32_adc_cfg stm32f4_adc_cfg = { 1977 .regs = &stm32f4_adc_regspec, 1978 .adc_info = &stm32f4_adc_info, 1979 .trigs = stm32f4_adc_trigs, 1980 .clk_required = true, 1981 .start_conv = stm32f4_adc_start_conv, 1982 .stop_conv = stm32f4_adc_stop_conv, 1983 .smp_cycles = stm32f4_adc_smp_cycles, 1984 }; 1985 1986 static const struct stm32_adc_cfg stm32h7_adc_cfg = { 1987 .regs = &stm32h7_adc_regspec, 1988 .adc_info = &stm32h7_adc_info, 1989 .trigs = stm32h7_adc_trigs, 1990 .start_conv = stm32h7_adc_start_conv, 1991 .stop_conv = stm32h7_adc_stop_conv, 1992 .prepare = stm32h7_adc_prepare, 1993 .unprepare = stm32h7_adc_unprepare, 1994 .smp_cycles = stm32h7_adc_smp_cycles, 1995 }; 1996 1997 static const struct stm32_adc_cfg stm32mp1_adc_cfg = { 1998 .regs = &stm32h7_adc_regspec, 1999 .adc_info = &stm32h7_adc_info, 2000 .trigs = stm32h7_adc_trigs, 2001 .has_vregready = true, 2002 .start_conv = stm32h7_adc_start_conv, 2003 .stop_conv = stm32h7_adc_stop_conv, 2004 .prepare = stm32h7_adc_prepare, 2005 .unprepare = stm32h7_adc_unprepare, 2006 .smp_cycles = stm32h7_adc_smp_cycles, 2007 }; 2008 2009 static const struct of_device_id stm32_adc_of_match[] = { 2010 { .compatible = "st,stm32f4-adc", .data = (void *)&stm32f4_adc_cfg }, 2011 { .compatible = "st,stm32h7-adc", .data = (void *)&stm32h7_adc_cfg }, 2012 { .compatible = "st,stm32mp1-adc", .data = (void *)&stm32mp1_adc_cfg }, 2013 {}, 2014 }; 2015 MODULE_DEVICE_TABLE(of, stm32_adc_of_match); 2016 2017 static struct platform_driver stm32_adc_driver = { 2018 .probe = stm32_adc_probe, 2019 .remove = stm32_adc_remove, 2020 .driver = { 2021 .name = "stm32-adc", 2022 .of_match_table = stm32_adc_of_match, 2023 .pm = &stm32_adc_pm_ops, 2024 }, 2025 }; 2026 module_platform_driver(stm32_adc_driver); 2027 2028 MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>"); 2029 MODULE_DESCRIPTION("STMicroelectronics STM32 ADC IIO driver"); 2030 MODULE_LICENSE("GPL v2"); 2031 MODULE_ALIAS("platform:stm32-adc"); 2032