1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * ST SPEAr ADC driver 4 * 5 * Copyright 2012 Stefan Roese <sr@denx.de> 6 */ 7 8 #include <linux/module.h> 9 #include <linux/platform_device.h> 10 #include <linux/interrupt.h> 11 #include <linux/device.h> 12 #include <linux/kernel.h> 13 #include <linux/slab.h> 14 #include <linux/io.h> 15 #include <linux/clk.h> 16 #include <linux/err.h> 17 #include <linux/completion.h> 18 #include <linux/of.h> 19 #include <linux/of_address.h> 20 21 #include <linux/iio/iio.h> 22 #include <linux/iio/sysfs.h> 23 24 /* SPEAR registers definitions */ 25 #define SPEAR600_ADC_SCAN_RATE_LO(x) ((x) & 0xFFFF) 26 #define SPEAR600_ADC_SCAN_RATE_HI(x) (((x) >> 0x10) & 0xFFFF) 27 #define SPEAR_ADC_CLK_LOW(x) (((x) & 0xf) << 0) 28 #define SPEAR_ADC_CLK_HIGH(x) (((x) & 0xf) << 4) 29 30 /* Bit definitions for SPEAR_ADC_STATUS */ 31 #define SPEAR_ADC_STATUS_START_CONVERSION BIT(0) 32 #define SPEAR_ADC_STATUS_CHANNEL_NUM(x) ((x) << 1) 33 #define SPEAR_ADC_STATUS_ADC_ENABLE BIT(4) 34 #define SPEAR_ADC_STATUS_AVG_SAMPLE(x) ((x) << 5) 35 #define SPEAR_ADC_STATUS_VREF_INTERNAL BIT(9) 36 37 #define SPEAR_ADC_DATA_MASK 0x03ff 38 #define SPEAR_ADC_DATA_BITS 10 39 40 #define SPEAR_ADC_MOD_NAME "spear-adc" 41 42 #define SPEAR_ADC_CHANNEL_NUM 8 43 44 #define SPEAR_ADC_CLK_MIN 2500000 45 #define SPEAR_ADC_CLK_MAX 20000000 46 47 struct adc_regs_spear3xx { 48 u32 status; 49 u32 average; 50 u32 scan_rate; 51 u32 clk; /* Not avail for 1340 & 1310 */ 52 u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM]; 53 u32 ch_data[SPEAR_ADC_CHANNEL_NUM]; 54 }; 55 56 struct chan_data { 57 u32 lsb; 58 u32 msb; 59 }; 60 61 struct adc_regs_spear6xx { 62 u32 status; 63 u32 pad[2]; 64 u32 clk; 65 u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM]; 66 struct chan_data ch_data[SPEAR_ADC_CHANNEL_NUM]; 67 u32 scan_rate_lo; 68 u32 scan_rate_hi; 69 struct chan_data average; 70 }; 71 72 struct spear_adc_state { 73 struct device_node *np; 74 struct adc_regs_spear3xx __iomem *adc_base_spear3xx; 75 struct adc_regs_spear6xx __iomem *adc_base_spear6xx; 76 struct clk *clk; 77 struct completion completion; 78 u32 current_clk; 79 u32 sampling_freq; 80 u32 avg_samples; 81 u32 vref_external; 82 u32 value; 83 }; 84 85 /* 86 * Functions to access some SPEAr ADC register. Abstracted into 87 * static inline functions, because of different register offsets 88 * on different SoC variants (SPEAr300 vs SPEAr600 etc). 89 */ 90 static void spear_adc_set_status(struct spear_adc_state *st, u32 val) 91 { 92 __raw_writel(val, &st->adc_base_spear6xx->status); 93 } 94 95 static void spear_adc_set_clk(struct spear_adc_state *st, u32 val) 96 { 97 u32 clk_high, clk_low, count; 98 u32 apb_clk = clk_get_rate(st->clk); 99 100 count = DIV_ROUND_UP(apb_clk, val); 101 clk_low = count / 2; 102 clk_high = count - clk_low; 103 st->current_clk = apb_clk / count; 104 105 __raw_writel(SPEAR_ADC_CLK_LOW(clk_low) | SPEAR_ADC_CLK_HIGH(clk_high), 106 &st->adc_base_spear6xx->clk); 107 } 108 109 static void spear_adc_set_ctrl(struct spear_adc_state *st, int n, 110 u32 val) 111 { 112 __raw_writel(val, &st->adc_base_spear6xx->ch_ctrl[n]); 113 } 114 115 static u32 spear_adc_get_average(struct spear_adc_state *st) 116 { 117 if (of_device_is_compatible(st->np, "st,spear600-adc")) { 118 return __raw_readl(&st->adc_base_spear6xx->average.msb) & 119 SPEAR_ADC_DATA_MASK; 120 } else { 121 return __raw_readl(&st->adc_base_spear3xx->average) & 122 SPEAR_ADC_DATA_MASK; 123 } 124 } 125 126 static void spear_adc_set_scanrate(struct spear_adc_state *st, u32 rate) 127 { 128 if (of_device_is_compatible(st->np, "st,spear600-adc")) { 129 __raw_writel(SPEAR600_ADC_SCAN_RATE_LO(rate), 130 &st->adc_base_spear6xx->scan_rate_lo); 131 __raw_writel(SPEAR600_ADC_SCAN_RATE_HI(rate), 132 &st->adc_base_spear6xx->scan_rate_hi); 133 } else { 134 __raw_writel(rate, &st->adc_base_spear3xx->scan_rate); 135 } 136 } 137 138 static int spear_adc_read_raw(struct iio_dev *indio_dev, 139 struct iio_chan_spec const *chan, 140 int *val, 141 int *val2, 142 long mask) 143 { 144 struct spear_adc_state *st = iio_priv(indio_dev); 145 u32 status; 146 147 switch (mask) { 148 case IIO_CHAN_INFO_RAW: 149 mutex_lock(&indio_dev->mlock); 150 151 status = SPEAR_ADC_STATUS_CHANNEL_NUM(chan->channel) | 152 SPEAR_ADC_STATUS_AVG_SAMPLE(st->avg_samples) | 153 SPEAR_ADC_STATUS_START_CONVERSION | 154 SPEAR_ADC_STATUS_ADC_ENABLE; 155 if (st->vref_external == 0) 156 status |= SPEAR_ADC_STATUS_VREF_INTERNAL; 157 158 spear_adc_set_status(st, status); 159 wait_for_completion(&st->completion); /* set by ISR */ 160 *val = st->value; 161 162 mutex_unlock(&indio_dev->mlock); 163 164 return IIO_VAL_INT; 165 166 case IIO_CHAN_INFO_SCALE: 167 *val = st->vref_external; 168 *val2 = SPEAR_ADC_DATA_BITS; 169 return IIO_VAL_FRACTIONAL_LOG2; 170 case IIO_CHAN_INFO_SAMP_FREQ: 171 *val = st->current_clk; 172 return IIO_VAL_INT; 173 } 174 175 return -EINVAL; 176 } 177 178 static int spear_adc_write_raw(struct iio_dev *indio_dev, 179 struct iio_chan_spec const *chan, 180 int val, 181 int val2, 182 long mask) 183 { 184 struct spear_adc_state *st = iio_priv(indio_dev); 185 int ret = 0; 186 187 if (mask != IIO_CHAN_INFO_SAMP_FREQ) 188 return -EINVAL; 189 190 mutex_lock(&indio_dev->mlock); 191 192 if ((val < SPEAR_ADC_CLK_MIN) || 193 (val > SPEAR_ADC_CLK_MAX) || 194 (val2 != 0)) { 195 ret = -EINVAL; 196 goto out; 197 } 198 199 spear_adc_set_clk(st, val); 200 201 out: 202 mutex_unlock(&indio_dev->mlock); 203 return ret; 204 } 205 206 #define SPEAR_ADC_CHAN(idx) { \ 207 .type = IIO_VOLTAGE, \ 208 .indexed = 1, \ 209 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 210 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ 211 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ 212 .channel = idx, \ 213 } 214 215 static const struct iio_chan_spec spear_adc_iio_channels[] = { 216 SPEAR_ADC_CHAN(0), 217 SPEAR_ADC_CHAN(1), 218 SPEAR_ADC_CHAN(2), 219 SPEAR_ADC_CHAN(3), 220 SPEAR_ADC_CHAN(4), 221 SPEAR_ADC_CHAN(5), 222 SPEAR_ADC_CHAN(6), 223 SPEAR_ADC_CHAN(7), 224 }; 225 226 static irqreturn_t spear_adc_isr(int irq, void *dev_id) 227 { 228 struct spear_adc_state *st = dev_id; 229 230 /* Read value to clear IRQ */ 231 st->value = spear_adc_get_average(st); 232 complete(&st->completion); 233 234 return IRQ_HANDLED; 235 } 236 237 static int spear_adc_configure(struct spear_adc_state *st) 238 { 239 int i; 240 241 /* Reset ADC core */ 242 spear_adc_set_status(st, 0); 243 __raw_writel(0, &st->adc_base_spear6xx->clk); 244 for (i = 0; i < 8; i++) 245 spear_adc_set_ctrl(st, i, 0); 246 spear_adc_set_scanrate(st, 0); 247 248 spear_adc_set_clk(st, st->sampling_freq); 249 250 return 0; 251 } 252 253 static const struct iio_info spear_adc_info = { 254 .read_raw = &spear_adc_read_raw, 255 .write_raw = &spear_adc_write_raw, 256 }; 257 258 static int spear_adc_probe(struct platform_device *pdev) 259 { 260 struct device_node *np = pdev->dev.of_node; 261 struct device *dev = &pdev->dev; 262 struct spear_adc_state *st; 263 struct resource *res; 264 struct iio_dev *indio_dev = NULL; 265 int ret = -ENODEV; 266 int irq; 267 268 indio_dev = devm_iio_device_alloc(dev, sizeof(struct spear_adc_state)); 269 if (!indio_dev) { 270 dev_err(dev, "failed allocating iio device\n"); 271 return -ENOMEM; 272 } 273 274 st = iio_priv(indio_dev); 275 st->np = np; 276 277 /* 278 * SPEAr600 has a different register layout than other SPEAr SoC's 279 * (e.g. SPEAr3xx). Let's provide two register base addresses 280 * to support multi-arch kernels. 281 */ 282 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 283 st->adc_base_spear6xx = devm_ioremap_resource(&pdev->dev, res); 284 if (IS_ERR(st->adc_base_spear6xx)) 285 return PTR_ERR(st->adc_base_spear6xx); 286 287 st->adc_base_spear3xx = 288 (struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx; 289 290 st->clk = devm_clk_get(dev, NULL); 291 if (IS_ERR(st->clk)) { 292 dev_err(dev, "failed getting clock\n"); 293 return PTR_ERR(st->clk); 294 } 295 296 ret = clk_prepare_enable(st->clk); 297 if (ret) { 298 dev_err(dev, "failed enabling clock\n"); 299 return ret; 300 } 301 302 irq = platform_get_irq(pdev, 0); 303 if (irq <= 0) { 304 dev_err(dev, "failed getting interrupt resource\n"); 305 ret = -EINVAL; 306 goto errout2; 307 } 308 309 ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME, 310 st); 311 if (ret < 0) { 312 dev_err(dev, "failed requesting interrupt\n"); 313 goto errout2; 314 } 315 316 if (of_property_read_u32(np, "sampling-frequency", 317 &st->sampling_freq)) { 318 dev_err(dev, "sampling-frequency missing in DT\n"); 319 ret = -EINVAL; 320 goto errout2; 321 } 322 323 /* 324 * Optional avg_samples defaults to 0, resulting in single data 325 * conversion 326 */ 327 of_property_read_u32(np, "average-samples", &st->avg_samples); 328 329 /* 330 * Optional vref_external defaults to 0, resulting in internal vref 331 * selection 332 */ 333 of_property_read_u32(np, "vref-external", &st->vref_external); 334 335 spear_adc_configure(st); 336 337 platform_set_drvdata(pdev, indio_dev); 338 339 init_completion(&st->completion); 340 341 indio_dev->name = SPEAR_ADC_MOD_NAME; 342 indio_dev->dev.parent = dev; 343 indio_dev->info = &spear_adc_info; 344 indio_dev->modes = INDIO_DIRECT_MODE; 345 indio_dev->channels = spear_adc_iio_channels; 346 indio_dev->num_channels = ARRAY_SIZE(spear_adc_iio_channels); 347 348 ret = iio_device_register(indio_dev); 349 if (ret) 350 goto errout2; 351 352 dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq); 353 354 return 0; 355 356 errout2: 357 clk_disable_unprepare(st->clk); 358 return ret; 359 } 360 361 static int spear_adc_remove(struct platform_device *pdev) 362 { 363 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 364 struct spear_adc_state *st = iio_priv(indio_dev); 365 366 iio_device_unregister(indio_dev); 367 clk_disable_unprepare(st->clk); 368 369 return 0; 370 } 371 372 #ifdef CONFIG_OF 373 static const struct of_device_id spear_adc_dt_ids[] = { 374 { .compatible = "st,spear600-adc", }, 375 { /* sentinel */ } 376 }; 377 MODULE_DEVICE_TABLE(of, spear_adc_dt_ids); 378 #endif 379 380 static struct platform_driver spear_adc_driver = { 381 .probe = spear_adc_probe, 382 .remove = spear_adc_remove, 383 .driver = { 384 .name = SPEAR_ADC_MOD_NAME, 385 .of_match_table = of_match_ptr(spear_adc_dt_ids), 386 }, 387 }; 388 389 module_platform_driver(spear_adc_driver); 390 391 MODULE_AUTHOR("Stefan Roese <sr@denx.de>"); 392 MODULE_DESCRIPTION("SPEAr ADC driver"); 393 MODULE_LICENSE("GPL"); 394