xref: /openbmc/linux/drivers/iio/adc/spear_adc.c (revision 31e67366)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * ST SPEAr ADC driver
4  *
5  * Copyright 2012 Stefan Roese <sr@denx.de>
6  */
7 
8 #include <linux/module.h>
9 #include <linux/platform_device.h>
10 #include <linux/interrupt.h>
11 #include <linux/device.h>
12 #include <linux/kernel.h>
13 #include <linux/slab.h>
14 #include <linux/io.h>
15 #include <linux/clk.h>
16 #include <linux/err.h>
17 #include <linux/completion.h>
18 #include <linux/of.h>
19 #include <linux/of_address.h>
20 
21 #include <linux/iio/iio.h>
22 #include <linux/iio/sysfs.h>
23 
24 /* SPEAR registers definitions */
25 #define SPEAR600_ADC_SCAN_RATE_LO(x)	((x) & 0xFFFF)
26 #define SPEAR600_ADC_SCAN_RATE_HI(x)	(((x) >> 0x10) & 0xFFFF)
27 #define SPEAR_ADC_CLK_LOW(x)		(((x) & 0xf) << 0)
28 #define SPEAR_ADC_CLK_HIGH(x)		(((x) & 0xf) << 4)
29 
30 /* Bit definitions for SPEAR_ADC_STATUS */
31 #define SPEAR_ADC_STATUS_START_CONVERSION	BIT(0)
32 #define SPEAR_ADC_STATUS_CHANNEL_NUM(x)		((x) << 1)
33 #define SPEAR_ADC_STATUS_ADC_ENABLE		BIT(4)
34 #define SPEAR_ADC_STATUS_AVG_SAMPLE(x)		((x) << 5)
35 #define SPEAR_ADC_STATUS_VREF_INTERNAL		BIT(9)
36 
37 #define SPEAR_ADC_DATA_MASK		0x03ff
38 #define SPEAR_ADC_DATA_BITS		10
39 
40 #define SPEAR_ADC_MOD_NAME "spear-adc"
41 
42 #define SPEAR_ADC_CHANNEL_NUM		8
43 
44 #define SPEAR_ADC_CLK_MIN			2500000
45 #define SPEAR_ADC_CLK_MAX			20000000
46 
47 struct adc_regs_spear3xx {
48 	u32 status;
49 	u32 average;
50 	u32 scan_rate;
51 	u32 clk;	/* Not avail for 1340 & 1310 */
52 	u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM];
53 	u32 ch_data[SPEAR_ADC_CHANNEL_NUM];
54 };
55 
56 struct chan_data {
57 	u32 lsb;
58 	u32 msb;
59 };
60 
61 struct adc_regs_spear6xx {
62 	u32 status;
63 	u32 pad[2];
64 	u32 clk;
65 	u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM];
66 	struct chan_data ch_data[SPEAR_ADC_CHANNEL_NUM];
67 	u32 scan_rate_lo;
68 	u32 scan_rate_hi;
69 	struct chan_data average;
70 };
71 
72 struct spear_adc_state {
73 	struct device_node *np;
74 	struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
75 	struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
76 	struct clk *clk;
77 	struct completion completion;
78 	u32 current_clk;
79 	u32 sampling_freq;
80 	u32 avg_samples;
81 	u32 vref_external;
82 	u32 value;
83 };
84 
85 /*
86  * Functions to access some SPEAr ADC register. Abstracted into
87  * static inline functions, because of different register offsets
88  * on different SoC variants (SPEAr300 vs SPEAr600 etc).
89  */
90 static void spear_adc_set_status(struct spear_adc_state *st, u32 val)
91 {
92 	__raw_writel(val, &st->adc_base_spear6xx->status);
93 }
94 
95 static void spear_adc_set_clk(struct spear_adc_state *st, u32 val)
96 {
97 	u32 clk_high, clk_low, count;
98 	u32 apb_clk = clk_get_rate(st->clk);
99 
100 	count = DIV_ROUND_UP(apb_clk, val);
101 	clk_low = count / 2;
102 	clk_high = count - clk_low;
103 	st->current_clk = apb_clk / count;
104 
105 	__raw_writel(SPEAR_ADC_CLK_LOW(clk_low) | SPEAR_ADC_CLK_HIGH(clk_high),
106 		     &st->adc_base_spear6xx->clk);
107 }
108 
109 static void spear_adc_set_ctrl(struct spear_adc_state *st, int n,
110 			       u32 val)
111 {
112 	__raw_writel(val, &st->adc_base_spear6xx->ch_ctrl[n]);
113 }
114 
115 static u32 spear_adc_get_average(struct spear_adc_state *st)
116 {
117 	if (of_device_is_compatible(st->np, "st,spear600-adc")) {
118 		return __raw_readl(&st->adc_base_spear6xx->average.msb) &
119 			SPEAR_ADC_DATA_MASK;
120 	} else {
121 		return __raw_readl(&st->adc_base_spear3xx->average) &
122 			SPEAR_ADC_DATA_MASK;
123 	}
124 }
125 
126 static void spear_adc_set_scanrate(struct spear_adc_state *st, u32 rate)
127 {
128 	if (of_device_is_compatible(st->np, "st,spear600-adc")) {
129 		__raw_writel(SPEAR600_ADC_SCAN_RATE_LO(rate),
130 			     &st->adc_base_spear6xx->scan_rate_lo);
131 		__raw_writel(SPEAR600_ADC_SCAN_RATE_HI(rate),
132 			     &st->adc_base_spear6xx->scan_rate_hi);
133 	} else {
134 		__raw_writel(rate, &st->adc_base_spear3xx->scan_rate);
135 	}
136 }
137 
138 static int spear_adc_read_raw(struct iio_dev *indio_dev,
139 			      struct iio_chan_spec const *chan,
140 			      int *val,
141 			      int *val2,
142 			      long mask)
143 {
144 	struct spear_adc_state *st = iio_priv(indio_dev);
145 	u32 status;
146 
147 	switch (mask) {
148 	case IIO_CHAN_INFO_RAW:
149 		mutex_lock(&indio_dev->mlock);
150 
151 		status = SPEAR_ADC_STATUS_CHANNEL_NUM(chan->channel) |
152 			SPEAR_ADC_STATUS_AVG_SAMPLE(st->avg_samples) |
153 			SPEAR_ADC_STATUS_START_CONVERSION |
154 			SPEAR_ADC_STATUS_ADC_ENABLE;
155 		if (st->vref_external == 0)
156 			status |= SPEAR_ADC_STATUS_VREF_INTERNAL;
157 
158 		spear_adc_set_status(st, status);
159 		wait_for_completion(&st->completion); /* set by ISR */
160 		*val = st->value;
161 
162 		mutex_unlock(&indio_dev->mlock);
163 
164 		return IIO_VAL_INT;
165 
166 	case IIO_CHAN_INFO_SCALE:
167 		*val = st->vref_external;
168 		*val2 = SPEAR_ADC_DATA_BITS;
169 		return IIO_VAL_FRACTIONAL_LOG2;
170 	case IIO_CHAN_INFO_SAMP_FREQ:
171 		*val = st->current_clk;
172 		return IIO_VAL_INT;
173 	}
174 
175 	return -EINVAL;
176 }
177 
178 static int spear_adc_write_raw(struct iio_dev *indio_dev,
179 			       struct iio_chan_spec const *chan,
180 			       int val,
181 			       int val2,
182 			       long mask)
183 {
184 	struct spear_adc_state *st = iio_priv(indio_dev);
185 	int ret = 0;
186 
187 	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
188 		return -EINVAL;
189 
190 	mutex_lock(&indio_dev->mlock);
191 
192 	if ((val < SPEAR_ADC_CLK_MIN) ||
193 	    (val > SPEAR_ADC_CLK_MAX) ||
194 	    (val2 != 0)) {
195 		ret = -EINVAL;
196 		goto out;
197 	}
198 
199 	spear_adc_set_clk(st, val);
200 
201 out:
202 	mutex_unlock(&indio_dev->mlock);
203 	return ret;
204 }
205 
206 #define SPEAR_ADC_CHAN(idx) {				\
207 	.type = IIO_VOLTAGE,				\
208 	.indexed = 1,					\
209 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
210 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
211 	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
212 	.channel = idx,					\
213 }
214 
215 static const struct iio_chan_spec spear_adc_iio_channels[] = {
216 	SPEAR_ADC_CHAN(0),
217 	SPEAR_ADC_CHAN(1),
218 	SPEAR_ADC_CHAN(2),
219 	SPEAR_ADC_CHAN(3),
220 	SPEAR_ADC_CHAN(4),
221 	SPEAR_ADC_CHAN(5),
222 	SPEAR_ADC_CHAN(6),
223 	SPEAR_ADC_CHAN(7),
224 };
225 
226 static irqreturn_t spear_adc_isr(int irq, void *dev_id)
227 {
228 	struct spear_adc_state *st = dev_id;
229 
230 	/* Read value to clear IRQ */
231 	st->value = spear_adc_get_average(st);
232 	complete(&st->completion);
233 
234 	return IRQ_HANDLED;
235 }
236 
237 static int spear_adc_configure(struct spear_adc_state *st)
238 {
239 	int i;
240 
241 	/* Reset ADC core */
242 	spear_adc_set_status(st, 0);
243 	__raw_writel(0, &st->adc_base_spear6xx->clk);
244 	for (i = 0; i < 8; i++)
245 		spear_adc_set_ctrl(st, i, 0);
246 	spear_adc_set_scanrate(st, 0);
247 
248 	spear_adc_set_clk(st, st->sampling_freq);
249 
250 	return 0;
251 }
252 
253 static const struct iio_info spear_adc_info = {
254 	.read_raw = &spear_adc_read_raw,
255 	.write_raw = &spear_adc_write_raw,
256 };
257 
258 static int spear_adc_probe(struct platform_device *pdev)
259 {
260 	struct device_node *np = pdev->dev.of_node;
261 	struct device *dev = &pdev->dev;
262 	struct spear_adc_state *st;
263 	struct iio_dev *indio_dev = NULL;
264 	int ret = -ENODEV;
265 	int irq;
266 
267 	indio_dev = devm_iio_device_alloc(dev, sizeof(struct spear_adc_state));
268 	if (!indio_dev) {
269 		dev_err(dev, "failed allocating iio device\n");
270 		return -ENOMEM;
271 	}
272 
273 	st = iio_priv(indio_dev);
274 	st->np = np;
275 
276 	/*
277 	 * SPEAr600 has a different register layout than other SPEAr SoC's
278 	 * (e.g. SPEAr3xx). Let's provide two register base addresses
279 	 * to support multi-arch kernels.
280 	 */
281 	st->adc_base_spear6xx = devm_platform_ioremap_resource(pdev, 0);
282 	if (IS_ERR(st->adc_base_spear6xx))
283 		return PTR_ERR(st->adc_base_spear6xx);
284 
285 	st->adc_base_spear3xx =
286 		(struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx;
287 
288 	st->clk = devm_clk_get(dev, NULL);
289 	if (IS_ERR(st->clk)) {
290 		dev_err(dev, "failed getting clock\n");
291 		return PTR_ERR(st->clk);
292 	}
293 
294 	ret = clk_prepare_enable(st->clk);
295 	if (ret) {
296 		dev_err(dev, "failed enabling clock\n");
297 		return ret;
298 	}
299 
300 	irq = platform_get_irq(pdev, 0);
301 	if (irq <= 0) {
302 		ret = -EINVAL;
303 		goto errout2;
304 	}
305 
306 	ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME,
307 			       st);
308 	if (ret < 0) {
309 		dev_err(dev, "failed requesting interrupt\n");
310 		goto errout2;
311 	}
312 
313 	if (of_property_read_u32(np, "sampling-frequency",
314 				 &st->sampling_freq)) {
315 		dev_err(dev, "sampling-frequency missing in DT\n");
316 		ret = -EINVAL;
317 		goto errout2;
318 	}
319 
320 	/*
321 	 * Optional avg_samples defaults to 0, resulting in single data
322 	 * conversion
323 	 */
324 	of_property_read_u32(np, "average-samples", &st->avg_samples);
325 
326 	/*
327 	 * Optional vref_external defaults to 0, resulting in internal vref
328 	 * selection
329 	 */
330 	of_property_read_u32(np, "vref-external", &st->vref_external);
331 
332 	spear_adc_configure(st);
333 
334 	platform_set_drvdata(pdev, indio_dev);
335 
336 	init_completion(&st->completion);
337 
338 	indio_dev->name = SPEAR_ADC_MOD_NAME;
339 	indio_dev->info = &spear_adc_info;
340 	indio_dev->modes = INDIO_DIRECT_MODE;
341 	indio_dev->channels = spear_adc_iio_channels;
342 	indio_dev->num_channels = ARRAY_SIZE(spear_adc_iio_channels);
343 
344 	ret = iio_device_register(indio_dev);
345 	if (ret)
346 		goto errout2;
347 
348 	dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
349 
350 	return 0;
351 
352 errout2:
353 	clk_disable_unprepare(st->clk);
354 	return ret;
355 }
356 
357 static int spear_adc_remove(struct platform_device *pdev)
358 {
359 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
360 	struct spear_adc_state *st = iio_priv(indio_dev);
361 
362 	iio_device_unregister(indio_dev);
363 	clk_disable_unprepare(st->clk);
364 
365 	return 0;
366 }
367 
368 #ifdef CONFIG_OF
369 static const struct of_device_id spear_adc_dt_ids[] = {
370 	{ .compatible = "st,spear600-adc", },
371 	{ /* sentinel */ }
372 };
373 MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
374 #endif
375 
376 static struct platform_driver spear_adc_driver = {
377 	.probe		= spear_adc_probe,
378 	.remove		= spear_adc_remove,
379 	.driver		= {
380 		.name	= SPEAR_ADC_MOD_NAME,
381 		.of_match_table = of_match_ptr(spear_adc_dt_ids),
382 	},
383 };
384 
385 module_platform_driver(spear_adc_driver);
386 
387 MODULE_AUTHOR("Stefan Roese <sr@denx.de>");
388 MODULE_DESCRIPTION("SPEAr ADC driver");
389 MODULE_LICENSE("GPL");
390