1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (c) 2022 Richtek Technology Corp. 4 * 5 * ChiYuan Huang <cy_huang@richtek.com> 6 */ 7 8 #include <linux/bitops.h> 9 #include <linux/delay.h> 10 #include <linux/i2c.h> 11 #include <linux/kernel.h> 12 #include <linux/mod_devicetable.h> 13 #include <linux/module.h> 14 #include <linux/pm_runtime.h> 15 #include <linux/property.h> 16 #include <linux/regmap.h> 17 #include <linux/sysfs.h> 18 #include <linux/types.h> 19 #include <linux/util_macros.h> 20 21 #include <linux/iio/buffer.h> 22 #include <linux/iio/iio.h> 23 #include <linux/iio/sysfs.h> 24 #include <linux/iio/trigger_consumer.h> 25 #include <linux/iio/triggered_buffer.h> 26 27 #define RTQ6056_REG_CONFIG 0x00 28 #define RTQ6056_REG_SHUNTVOLT 0x01 29 #define RTQ6056_REG_BUSVOLT 0x02 30 #define RTQ6056_REG_POWER 0x03 31 #define RTQ6056_REG_CURRENT 0x04 32 #define RTQ6056_REG_CALIBRATION 0x05 33 #define RTQ6056_REG_MASKENABLE 0x06 34 #define RTQ6056_REG_ALERTLIMIT 0x07 35 #define RTQ6056_REG_MANUFACTID 0xFE 36 #define RTQ6056_REG_DIEID 0xFF 37 38 #define RTQ6056_VENDOR_ID 0x1214 39 #define RTQ6056_DEFAULT_CONFIG 0x4127 40 #define RTQ6056_CONT_ALLON 7 41 42 enum { 43 RTQ6056_CH_VSHUNT = 0, 44 RTQ6056_CH_VBUS, 45 RTQ6056_CH_POWER, 46 RTQ6056_CH_CURRENT, 47 RTQ6056_MAX_CHANNEL 48 }; 49 50 enum { 51 F_OPMODE = 0, 52 F_VSHUNTCT, 53 F_VBUSCT, 54 F_AVG, 55 F_RESET, 56 F_MAX_FIELDS 57 }; 58 59 struct rtq6056_priv { 60 struct device *dev; 61 struct regmap *regmap; 62 struct regmap_field *rm_fields[F_MAX_FIELDS]; 63 u32 shunt_resistor_uohm; 64 int vshuntct_us; 65 int vbusct_us; 66 int avg_sample; 67 }; 68 69 static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = { 70 [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2), 71 [F_VSHUNTCT] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 5), 72 [F_VBUSCT] = REG_FIELD(RTQ6056_REG_CONFIG, 6, 8), 73 [F_AVG] = REG_FIELD(RTQ6056_REG_CONFIG, 9, 11), 74 [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15), 75 }; 76 77 static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = { 78 { 79 .type = IIO_VOLTAGE, 80 .indexed = 1, 81 .channel = 0, 82 .address = RTQ6056_REG_SHUNTVOLT, 83 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 84 BIT(IIO_CHAN_INFO_SCALE) | 85 BIT(IIO_CHAN_INFO_SAMP_FREQ), 86 .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), 87 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 88 .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 89 .scan_index = 0, 90 .scan_type = { 91 .sign = 's', 92 .realbits = 16, 93 .storagebits = 16, 94 .endianness = IIO_CPU, 95 }, 96 }, 97 { 98 .type = IIO_VOLTAGE, 99 .indexed = 1, 100 .channel = 1, 101 .address = RTQ6056_REG_BUSVOLT, 102 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 103 BIT(IIO_CHAN_INFO_SCALE) | 104 BIT(IIO_CHAN_INFO_SAMP_FREQ), 105 .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), 106 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 107 .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 108 .scan_index = 1, 109 .scan_type = { 110 .sign = 'u', 111 .realbits = 16, 112 .storagebits = 16, 113 .endianness = IIO_CPU, 114 }, 115 }, 116 { 117 .type = IIO_POWER, 118 .indexed = 1, 119 .channel = 2, 120 .address = RTQ6056_REG_POWER, 121 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 122 BIT(IIO_CHAN_INFO_SCALE) | 123 BIT(IIO_CHAN_INFO_SAMP_FREQ), 124 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 125 .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 126 .scan_index = 2, 127 .scan_type = { 128 .sign = 'u', 129 .realbits = 16, 130 .storagebits = 16, 131 .endianness = IIO_CPU, 132 }, 133 }, 134 { 135 .type = IIO_CURRENT, 136 .indexed = 1, 137 .channel = 3, 138 .address = RTQ6056_REG_CURRENT, 139 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | 140 BIT(IIO_CHAN_INFO_SAMP_FREQ), 141 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 142 .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), 143 .scan_index = 3, 144 .scan_type = { 145 .sign = 's', 146 .realbits = 16, 147 .storagebits = 16, 148 .endianness = IIO_CPU, 149 }, 150 }, 151 IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL), 152 }; 153 154 static int rtq6056_adc_read_channel(struct rtq6056_priv *priv, 155 struct iio_chan_spec const *ch, 156 int *val) 157 { 158 struct device *dev = priv->dev; 159 unsigned int addr = ch->address; 160 unsigned int regval; 161 int ret; 162 163 pm_runtime_get_sync(dev); 164 ret = regmap_read(priv->regmap, addr, ®val); 165 pm_runtime_mark_last_busy(dev); 166 pm_runtime_put(dev); 167 if (ret) 168 return ret; 169 170 /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */ 171 if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER) 172 *val = regval; 173 else 174 *val = sign_extend32(regval, 16); 175 176 return IIO_VAL_INT; 177 } 178 179 static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val, 180 int *val2) 181 { 182 switch (ch->address) { 183 case RTQ6056_REG_SHUNTVOLT: 184 /* VSHUNT lsb 2.5uV */ 185 *val = 2500; 186 *val2 = 1000000; 187 return IIO_VAL_FRACTIONAL; 188 case RTQ6056_REG_BUSVOLT: 189 /* VBUS lsb 1.25mV */ 190 *val = 1250; 191 *val2 = 1000; 192 return IIO_VAL_FRACTIONAL; 193 case RTQ6056_REG_POWER: 194 /* Power lsb 25mW */ 195 *val = 25; 196 return IIO_VAL_INT; 197 default: 198 return -EINVAL; 199 } 200 } 201 202 /* 203 * Sample frequency for channel VSHUNT and VBUS. The indices correspond 204 * with the bit value expected by the chip. And it can be found at 205 * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf 206 */ 207 static const int rtq6056_samp_freq_list[] = { 208 7194, 4926, 3717, 1904, 964, 485, 243, 122, 209 }; 210 211 static int rtq6056_adc_set_samp_freq(struct rtq6056_priv *priv, 212 struct iio_chan_spec const *ch, int val) 213 { 214 struct regmap_field *rm_field; 215 unsigned int selector; 216 int *ct, ret; 217 218 if (val > 7194 || val < 122) 219 return -EINVAL; 220 221 if (ch->address == RTQ6056_REG_SHUNTVOLT) { 222 rm_field = priv->rm_fields[F_VSHUNTCT]; 223 ct = &priv->vshuntct_us; 224 } else if (ch->address == RTQ6056_REG_BUSVOLT) { 225 rm_field = priv->rm_fields[F_VBUSCT]; 226 ct = &priv->vbusct_us; 227 } else 228 return -EINVAL; 229 230 selector = find_closest_descending(val, rtq6056_samp_freq_list, 231 ARRAY_SIZE(rtq6056_samp_freq_list)); 232 233 ret = regmap_field_write(rm_field, selector); 234 if (ret) 235 return ret; 236 237 *ct = 1000000 / rtq6056_samp_freq_list[selector]; 238 239 return 0; 240 } 241 242 /* 243 * Available averaging rate for rtq6056. The indices correspond with the bit 244 * value expected by the chip. And it can be found at 245 * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf 246 */ 247 static const int rtq6056_avg_sample_list[] = { 248 1, 4, 16, 64, 128, 256, 512, 1024, 249 }; 250 251 static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val) 252 { 253 unsigned int selector; 254 int ret; 255 256 if (val > 1024 || val < 1) 257 return -EINVAL; 258 259 selector = find_closest(val, rtq6056_avg_sample_list, 260 ARRAY_SIZE(rtq6056_avg_sample_list)); 261 262 ret = regmap_field_write(priv->rm_fields[F_AVG], selector); 263 if (ret) 264 return ret; 265 266 priv->avg_sample = rtq6056_avg_sample_list[selector]; 267 268 return 0; 269 } 270 271 static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv, 272 struct iio_chan_spec const *ch, int *val) 273 { 274 int sample_time; 275 276 if (ch->address == RTQ6056_REG_SHUNTVOLT) 277 sample_time = priv->vshuntct_us; 278 else if (ch->address == RTQ6056_REG_BUSVOLT) 279 sample_time = priv->vbusct_us; 280 else { 281 sample_time = priv->vshuntct_us + priv->vbusct_us; 282 sample_time *= priv->avg_sample; 283 } 284 285 *val = 1000000 / sample_time; 286 287 return IIO_VAL_INT; 288 } 289 290 static int rtq6056_adc_read_raw(struct iio_dev *indio_dev, 291 struct iio_chan_spec const *chan, int *val, 292 int *val2, long mask) 293 { 294 struct rtq6056_priv *priv = iio_priv(indio_dev); 295 296 switch (mask) { 297 case IIO_CHAN_INFO_RAW: 298 return rtq6056_adc_read_channel(priv, chan, val); 299 case IIO_CHAN_INFO_SCALE: 300 return rtq6056_adc_read_scale(chan, val, val2); 301 case IIO_CHAN_INFO_OVERSAMPLING_RATIO: 302 *val = priv->avg_sample; 303 return IIO_VAL_INT; 304 case IIO_CHAN_INFO_SAMP_FREQ: 305 return rtq6056_adc_get_sample_freq(priv, chan, val); 306 default: 307 return -EINVAL; 308 } 309 } 310 311 static int rtq6056_adc_read_avail(struct iio_dev *indio_dev, 312 struct iio_chan_spec const *chan, 313 const int **vals, int *type, int *length, 314 long mask) 315 { 316 switch (mask) { 317 case IIO_CHAN_INFO_SAMP_FREQ: 318 *vals = rtq6056_samp_freq_list; 319 *type = IIO_VAL_INT; 320 *length = ARRAY_SIZE(rtq6056_samp_freq_list); 321 return IIO_AVAIL_LIST; 322 case IIO_CHAN_INFO_OVERSAMPLING_RATIO: 323 *vals = rtq6056_avg_sample_list; 324 *type = IIO_VAL_INT; 325 *length = ARRAY_SIZE(rtq6056_avg_sample_list); 326 return IIO_AVAIL_LIST; 327 default: 328 return -EINVAL; 329 } 330 } 331 332 static int rtq6056_adc_write_raw(struct iio_dev *indio_dev, 333 struct iio_chan_spec const *chan, int val, 334 int val2, long mask) 335 { 336 struct rtq6056_priv *priv = iio_priv(indio_dev); 337 int ret; 338 339 ret = iio_device_claim_direct_mode(indio_dev); 340 if (ret) 341 return ret; 342 343 switch (mask) { 344 case IIO_CHAN_INFO_SAMP_FREQ: 345 ret = rtq6056_adc_set_samp_freq(priv, chan, val); 346 break; 347 case IIO_CHAN_INFO_OVERSAMPLING_RATIO: 348 ret = rtq6056_adc_set_average(priv, val); 349 break; 350 default: 351 ret = -EINVAL; 352 break; 353 } 354 355 iio_device_release_direct_mode(indio_dev); 356 357 return ret; 358 } 359 360 static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = { 361 [RTQ6056_CH_VSHUNT] = "Vshunt", 362 [RTQ6056_CH_VBUS] = "Vbus", 363 [RTQ6056_CH_POWER] = "Power", 364 [RTQ6056_CH_CURRENT] = "Current", 365 }; 366 367 static int rtq6056_adc_read_label(struct iio_dev *indio_dev, 368 struct iio_chan_spec const *chan, 369 char *label) 370 { 371 return sysfs_emit(label, "%s\n", rtq6056_channel_labels[chan->channel]); 372 } 373 374 static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv, 375 int resistor_uohm) 376 { 377 unsigned int calib_val; 378 int ret; 379 380 if (resistor_uohm <= 0) { 381 dev_err(priv->dev, "Invalid resistor [%d]\n", resistor_uohm); 382 return -EINVAL; 383 } 384 385 /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */ 386 calib_val = 5120000 / resistor_uohm; 387 ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val); 388 if (ret) 389 return ret; 390 391 priv->shunt_resistor_uohm = resistor_uohm; 392 393 return 0; 394 } 395 396 static ssize_t shunt_resistor_show(struct device *dev, 397 struct device_attribute *attr, char *buf) 398 { 399 struct rtq6056_priv *priv = iio_priv(dev_to_iio_dev(dev)); 400 int vals[2] = { priv->shunt_resistor_uohm, 1000000 }; 401 402 return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals); 403 } 404 405 static ssize_t shunt_resistor_store(struct device *dev, 406 struct device_attribute *attr, 407 const char *buf, size_t len) 408 { 409 struct iio_dev *indio_dev = dev_to_iio_dev(dev); 410 struct rtq6056_priv *priv = iio_priv(indio_dev); 411 int val, val_fract, ret; 412 413 ret = iio_device_claim_direct_mode(indio_dev); 414 if (ret) 415 return ret; 416 417 ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract); 418 if (ret) 419 goto out_store; 420 421 ret = rtq6056_set_shunt_resistor(priv, val * 1000000 + val_fract); 422 423 out_store: 424 iio_device_release_direct_mode(indio_dev); 425 426 return ret ?: len; 427 } 428 429 static IIO_DEVICE_ATTR_RW(shunt_resistor, 0); 430 431 static struct attribute *rtq6056_attributes[] = { 432 &iio_dev_attr_shunt_resistor.dev_attr.attr, 433 NULL 434 }; 435 436 static const struct attribute_group rtq6056_attribute_group = { 437 .attrs = rtq6056_attributes, 438 }; 439 440 static const struct iio_info rtq6056_info = { 441 .attrs = &rtq6056_attribute_group, 442 .read_raw = rtq6056_adc_read_raw, 443 .read_avail = rtq6056_adc_read_avail, 444 .write_raw = rtq6056_adc_write_raw, 445 .read_label = rtq6056_adc_read_label, 446 }; 447 448 static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p) 449 { 450 struct iio_poll_func *pf = p; 451 struct iio_dev *indio_dev = pf->indio_dev; 452 struct rtq6056_priv *priv = iio_priv(indio_dev); 453 struct device *dev = priv->dev; 454 struct { 455 u16 vals[RTQ6056_MAX_CHANNEL]; 456 s64 timestamp __aligned(8); 457 } data; 458 unsigned int raw; 459 int i = 0, bit, ret; 460 461 memset(&data, 0, sizeof(data)); 462 463 pm_runtime_get_sync(dev); 464 465 for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { 466 unsigned int addr = rtq6056_channels[bit].address; 467 468 ret = regmap_read(priv->regmap, addr, &raw); 469 if (ret) 470 goto out; 471 472 data.vals[i++] = raw; 473 } 474 475 iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev)); 476 477 out: 478 pm_runtime_mark_last_busy(dev); 479 pm_runtime_put(dev); 480 481 iio_trigger_notify_done(indio_dev->trig); 482 483 return IRQ_HANDLED; 484 } 485 486 static void rtq6056_enter_shutdown_state(void *dev) 487 { 488 struct rtq6056_priv *priv = dev_get_drvdata(dev); 489 490 /* Enter shutdown state */ 491 regmap_field_write(priv->rm_fields[F_OPMODE], 0); 492 } 493 494 static bool rtq6056_is_readable_reg(struct device *dev, unsigned int reg) 495 { 496 switch (reg) { 497 case RTQ6056_REG_CONFIG ... RTQ6056_REG_ALERTLIMIT: 498 case RTQ6056_REG_MANUFACTID ... RTQ6056_REG_DIEID: 499 return true; 500 default: 501 return false; 502 } 503 } 504 505 static bool rtq6056_is_writeable_reg(struct device *dev, unsigned int reg) 506 { 507 switch (reg) { 508 case RTQ6056_REG_CONFIG: 509 case RTQ6056_REG_CALIBRATION ... RTQ6056_REG_ALERTLIMIT: 510 return true; 511 default: 512 return false; 513 } 514 } 515 516 static const struct regmap_config rtq6056_regmap_config = { 517 .reg_bits = 8, 518 .val_bits = 16, 519 .val_format_endian = REGMAP_ENDIAN_BIG, 520 .max_register = RTQ6056_REG_DIEID, 521 .readable_reg = rtq6056_is_readable_reg, 522 .writeable_reg = rtq6056_is_writeable_reg, 523 }; 524 525 static int rtq6056_probe(struct i2c_client *i2c) 526 { 527 struct iio_dev *indio_dev; 528 struct rtq6056_priv *priv; 529 struct device *dev = &i2c->dev; 530 struct regmap *regmap; 531 unsigned int vendor_id, shunt_resistor_uohm; 532 int ret; 533 534 if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA)) 535 return -EOPNOTSUPP; 536 537 indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); 538 if (!indio_dev) 539 return -ENOMEM; 540 541 priv = iio_priv(indio_dev); 542 priv->dev = dev; 543 priv->vshuntct_us = priv->vbusct_us = 1037; 544 priv->avg_sample = 1; 545 i2c_set_clientdata(i2c, priv); 546 547 regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config); 548 if (IS_ERR(regmap)) 549 return dev_err_probe(dev, PTR_ERR(regmap), 550 "Failed to init regmap\n"); 551 552 priv->regmap = regmap; 553 554 ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id); 555 if (ret) 556 return dev_err_probe(dev, ret, 557 "Failed to get manufacturer info\n"); 558 559 if (vendor_id != RTQ6056_VENDOR_ID) 560 return dev_err_probe(dev, -ENODEV, 561 "Invalid vendor id 0x%04x\n", vendor_id); 562 563 ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields, 564 rtq6056_reg_fields, F_MAX_FIELDS); 565 if (ret) 566 return dev_err_probe(dev, ret, "Failed to init regmap field\n"); 567 568 /* 569 * By default, configure average sample as 1, bus and shunt conversion 570 * time as 1037 microsecond, and operating mode to all on. 571 */ 572 ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG); 573 if (ret) 574 return dev_err_probe(dev, ret, 575 "Failed to enable continuous sensing\n"); 576 577 ret = devm_add_action_or_reset(dev, rtq6056_enter_shutdown_state, dev); 578 if (ret) 579 return ret; 580 581 pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); 582 pm_runtime_use_autosuspend(dev); 583 pm_runtime_set_active(dev); 584 pm_runtime_mark_last_busy(dev); 585 ret = devm_pm_runtime_enable(dev); 586 if (ret) 587 return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n"); 588 589 /* By default, use 2000 micro-Ohm resistor */ 590 shunt_resistor_uohm = 2000; 591 device_property_read_u32(dev, "shunt-resistor-micro-ohms", 592 &shunt_resistor_uohm); 593 594 ret = rtq6056_set_shunt_resistor(priv, shunt_resistor_uohm); 595 if (ret) 596 return dev_err_probe(dev, ret, 597 "Failed to init shunt resistor\n"); 598 599 indio_dev->name = "rtq6056"; 600 indio_dev->modes = INDIO_DIRECT_MODE; 601 indio_dev->channels = rtq6056_channels; 602 indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels); 603 indio_dev->info = &rtq6056_info; 604 605 ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, 606 rtq6056_buffer_trigger_handler, 607 NULL); 608 if (ret) 609 return dev_err_probe(dev, ret, 610 "Failed to allocate iio trigger buffer\n"); 611 612 return devm_iio_device_register(dev, indio_dev); 613 } 614 615 static int rtq6056_runtime_suspend(struct device *dev) 616 { 617 struct rtq6056_priv *priv = dev_get_drvdata(dev); 618 619 /* Configure to shutdown mode */ 620 return regmap_field_write(priv->rm_fields[F_OPMODE], 0); 621 } 622 623 static int rtq6056_runtime_resume(struct device *dev) 624 { 625 struct rtq6056_priv *priv = dev_get_drvdata(dev); 626 int sample_rdy_time_us, ret; 627 628 ret = regmap_field_write(priv->rm_fields[F_OPMODE], RTQ6056_CONT_ALLON); 629 if (ret) 630 return ret; 631 632 sample_rdy_time_us = priv->vbusct_us + priv->vshuntct_us; 633 sample_rdy_time_us *= priv->avg_sample; 634 635 usleep_range(sample_rdy_time_us, sample_rdy_time_us + 100); 636 637 return 0; 638 } 639 640 static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend, 641 rtq6056_runtime_resume, NULL); 642 643 static const struct of_device_id rtq6056_device_match[] = { 644 { .compatible = "richtek,rtq6056" }, 645 {} 646 }; 647 MODULE_DEVICE_TABLE(of, rtq6056_device_match); 648 649 static struct i2c_driver rtq6056_driver = { 650 .driver = { 651 .name = "rtq6056", 652 .of_match_table = rtq6056_device_match, 653 .pm = pm_ptr(&rtq6056_pm_ops), 654 }, 655 .probe_new = rtq6056_probe, 656 }; 657 module_i2c_driver(rtq6056_driver); 658 659 MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); 660 MODULE_DESCRIPTION("Richtek RTQ6056 Driver"); 661 MODULE_LICENSE("GPL v2"); 662