xref: /openbmc/linux/drivers/iio/adc/rn5t618-adc.c (revision 90f59ee4)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * ADC driver for the RICOH RN5T618 power management chip family
4  *
5  * Copyright (C) 2019 Andreas Kemnade
6  */
7 
8 #include <linux/kernel.h>
9 #include <linux/device.h>
10 #include <linux/errno.h>
11 #include <linux/interrupt.h>
12 #include <linux/init.h>
13 #include <linux/module.h>
14 #include <linux/mfd/rn5t618.h>
15 #include <linux/platform_device.h>
16 #include <linux/completion.h>
17 #include <linux/regmap.h>
18 #include <linux/iio/iio.h>
19 #include <linux/iio/driver.h>
20 #include <linux/iio/machine.h>
21 #include <linux/slab.h>
22 
23 #define RN5T618_ADC_CONVERSION_TIMEOUT   (msecs_to_jiffies(500))
24 #define RN5T618_REFERENCE_VOLT 2500
25 
26 /* mask for selecting channels for single conversion */
27 #define RN5T618_ADCCNT3_CHANNEL_MASK 0x7
28 /* average 4-time conversion mode */
29 #define RN5T618_ADCCNT3_AVG BIT(3)
30 /* set for starting a single conversion, gets cleared by hw when done */
31 #define RN5T618_ADCCNT3_GODONE BIT(4)
32 /* automatic conversion, period is in ADCCNT2, selected channels are
33  * in ADCCNT1
34  */
35 #define RN5T618_ADCCNT3_AUTO BIT(5)
36 #define RN5T618_ADCEND_IRQ BIT(0)
37 
38 struct rn5t618_adc_data {
39 	struct device *dev;
40 	struct rn5t618 *rn5t618;
41 	struct completion conv_completion;
42 	int irq;
43 };
44 
45 struct rn5t618_channel_ratios {
46 	u16 numerator;
47 	u16 denominator;
48 };
49 
50 enum rn5t618_channels {
51 	LIMMON = 0,
52 	VBAT,
53 	VADP,
54 	VUSB,
55 	VSYS,
56 	VTHM,
57 	AIN1,
58 	AIN0
59 };
60 
61 static const struct rn5t618_channel_ratios rn5t618_ratios[8] = {
62 	[LIMMON] = {50, 32}, /* measured across 20mOhm, amplified by 32 */
63 	[VBAT] = {2, 1},
64 	[VADP] = {3, 1},
65 	[VUSB] = {3, 1},
66 	[VSYS] = {3, 1},
67 	[VTHM] = {1, 1},
68 	[AIN1] = {1, 1},
69 	[AIN0] = {1, 1},
70 };
71 
72 static int rn5t618_read_adc_reg(struct rn5t618 *rn5t618, int reg, u16 *val)
73 {
74 	u8 data[2];
75 	int ret;
76 
77 	ret = regmap_bulk_read(rn5t618->regmap, reg, data, sizeof(data));
78 	if (ret < 0)
79 		return ret;
80 
81 	*val = (data[0] << 4) | (data[1] & 0xF);
82 
83 	return 0;
84 }
85 
86 static irqreturn_t rn5t618_adc_irq(int irq, void *data)
87 {
88 	struct rn5t618_adc_data *adc = data;
89 	unsigned int r = 0;
90 	int ret;
91 
92 	/* clear low & high threshold irqs */
93 	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC1, 0);
94 	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC2, 0);
95 
96 	ret = regmap_read(adc->rn5t618->regmap, RN5T618_IR_ADC3, &r);
97 	if (ret < 0)
98 		dev_err(adc->dev, "failed to read IRQ status: %d\n", ret);
99 
100 	regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC3, 0);
101 
102 	if (r & RN5T618_ADCEND_IRQ)
103 		complete(&adc->conv_completion);
104 
105 	return IRQ_HANDLED;
106 }
107 
108 static int rn5t618_adc_read(struct iio_dev *iio_dev,
109 			    const struct iio_chan_spec *chan,
110 			    int *val, int *val2, long mask)
111 {
112 	struct rn5t618_adc_data *adc = iio_priv(iio_dev);
113 	u16 raw;
114 	int ret;
115 
116 	if (mask == IIO_CHAN_INFO_SCALE) {
117 		*val = RN5T618_REFERENCE_VOLT *
118 		       rn5t618_ratios[chan->channel].numerator;
119 		*val2 = rn5t618_ratios[chan->channel].denominator * 4095;
120 
121 		return IIO_VAL_FRACTIONAL;
122 	}
123 
124 	/* select channel */
125 	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
126 				 RN5T618_ADCCNT3_CHANNEL_MASK,
127 				 chan->channel);
128 	if (ret < 0)
129 		return ret;
130 
131 	ret = regmap_write(adc->rn5t618->regmap, RN5T618_EN_ADCIR3,
132 			   RN5T618_ADCEND_IRQ);
133 	if (ret < 0)
134 		return ret;
135 
136 	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
137 				 RN5T618_ADCCNT3_AVG,
138 				 mask == IIO_CHAN_INFO_AVERAGE_RAW ?
139 				 RN5T618_ADCCNT3_AVG : 0);
140 	if (ret < 0)
141 		return ret;
142 
143 	init_completion(&adc->conv_completion);
144 	/* single conversion */
145 	ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
146 				 RN5T618_ADCCNT3_GODONE,
147 				 RN5T618_ADCCNT3_GODONE);
148 	if (ret < 0)
149 		return ret;
150 
151 	ret = wait_for_completion_timeout(&adc->conv_completion,
152 					  RN5T618_ADC_CONVERSION_TIMEOUT);
153 	if (ret == 0) {
154 		dev_warn(adc->dev, "timeout waiting for adc result\n");
155 		return -ETIMEDOUT;
156 	}
157 
158 	ret = rn5t618_read_adc_reg(adc->rn5t618,
159 				   RN5T618_ILIMDATAH + 2 * chan->channel,
160 				   &raw);
161 	if (ret < 0)
162 		return ret;
163 
164 	*val = raw;
165 
166 	return IIO_VAL_INT;
167 }
168 
169 static const struct iio_info rn5t618_adc_iio_info = {
170 	.read_raw = &rn5t618_adc_read,
171 };
172 
173 #define RN5T618_ADC_CHANNEL(_channel, _type, _name) { \
174 	.type = _type, \
175 	.channel = _channel, \
176 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
177 			      BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
178 			      BIT(IIO_CHAN_INFO_SCALE), \
179 	.datasheet_name = _name, \
180 	.indexed = 1. \
181 }
182 
183 static const struct iio_chan_spec rn5t618_adc_iio_channels[] = {
184 	RN5T618_ADC_CHANNEL(LIMMON, IIO_CURRENT, "LIMMON"),
185 	RN5T618_ADC_CHANNEL(VBAT, IIO_VOLTAGE, "VBAT"),
186 	RN5T618_ADC_CHANNEL(VADP, IIO_VOLTAGE, "VADP"),
187 	RN5T618_ADC_CHANNEL(VUSB, IIO_VOLTAGE, "VUSB"),
188 	RN5T618_ADC_CHANNEL(VSYS, IIO_VOLTAGE, "VSYS"),
189 	RN5T618_ADC_CHANNEL(VTHM, IIO_VOLTAGE, "VTHM"),
190 	RN5T618_ADC_CHANNEL(AIN1, IIO_VOLTAGE, "AIN1"),
191 	RN5T618_ADC_CHANNEL(AIN0, IIO_VOLTAGE, "AIN0")
192 };
193 
194 static struct iio_map rn5t618_maps[] = {
195 	IIO_MAP("VADP", "rn5t618-power", "vadp"),
196 	IIO_MAP("VUSB", "rn5t618-power", "vusb"),
197 	{ /* sentinel */ }
198 };
199 
200 static int rn5t618_adc_probe(struct platform_device *pdev)
201 {
202 	int ret;
203 	struct iio_dev *iio_dev;
204 	struct rn5t618_adc_data *adc;
205 	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
206 
207 	iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
208 	if (!iio_dev) {
209 		dev_err(&pdev->dev, "failed allocating iio device\n");
210 		return -ENOMEM;
211 	}
212 
213 	adc = iio_priv(iio_dev);
214 	adc->dev = &pdev->dev;
215 	adc->rn5t618 = rn5t618;
216 
217 	if (rn5t618->irq_data)
218 		adc->irq = regmap_irq_get_virq(rn5t618->irq_data,
219 					       RN5T618_IRQ_ADC);
220 
221 	if (adc->irq <= 0) {
222 		dev_err(&pdev->dev, "get virq failed\n");
223 		return -EINVAL;
224 	}
225 
226 	init_completion(&adc->conv_completion);
227 
228 	iio_dev->name = dev_name(&pdev->dev);
229 	iio_dev->info = &rn5t618_adc_iio_info;
230 	iio_dev->modes = INDIO_DIRECT_MODE;
231 	iio_dev->channels = rn5t618_adc_iio_channels;
232 	iio_dev->num_channels = ARRAY_SIZE(rn5t618_adc_iio_channels);
233 
234 	/* stop any auto-conversion */
235 	ret = regmap_write(rn5t618->regmap, RN5T618_ADCCNT3, 0);
236 	if (ret < 0)
237 		return ret;
238 
239 	platform_set_drvdata(pdev, iio_dev);
240 
241 	ret = devm_request_threaded_irq(adc->dev, adc->irq, NULL,
242 					rn5t618_adc_irq,
243 					IRQF_ONESHOT, dev_name(adc->dev),
244 					adc);
245 	if (ret < 0) {
246 		dev_err(adc->dev, "request irq %d failed: %d\n", adc->irq, ret);
247 		return ret;
248 	}
249 
250 	ret = devm_iio_map_array_register(adc->dev, iio_dev, rn5t618_maps);
251 	if (ret < 0)
252 		return ret;
253 
254 	return devm_iio_device_register(adc->dev, iio_dev);
255 }
256 
257 static struct platform_driver rn5t618_adc_driver = {
258 	.driver = {
259 		.name   = "rn5t618-adc",
260 	},
261 	.probe = rn5t618_adc_probe,
262 };
263 
264 module_platform_driver(rn5t618_adc_driver);
265 MODULE_ALIAS("platform:rn5t618-adc");
266 MODULE_DESCRIPTION("RICOH RN5T618 ADC driver");
267 MODULE_LICENSE("GPL");
268