1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved. 4 */ 5 6 #include <linux/bitops.h> 7 #include <linux/completion.h> 8 #include <linux/delay.h> 9 #include <linux/err.h> 10 #include <linux/iio/adc/qcom-vadc-common.h> 11 #include <linux/iio/iio.h> 12 #include <linux/interrupt.h> 13 #include <linux/kernel.h> 14 #include <linux/log2.h> 15 #include <linux/math64.h> 16 #include <linux/module.h> 17 #include <linux/mod_devicetable.h> 18 #include <linux/platform_device.h> 19 #include <linux/property.h> 20 #include <linux/regmap.h> 21 #include <linux/slab.h> 22 23 #include <dt-bindings/iio/qcom,spmi-vadc.h> 24 25 #define ADC5_USR_REVISION1 0x0 26 #define ADC5_USR_STATUS1 0x8 27 #define ADC5_USR_STATUS1_CONV_FAULT BIT(7) 28 #define ADC5_USR_STATUS1_REQ_STS BIT(1) 29 #define ADC5_USR_STATUS1_EOC BIT(0) 30 #define ADC5_USR_STATUS1_REQ_STS_EOC_MASK 0x3 31 32 #define ADC5_USR_STATUS2 0x9 33 #define ADC5_USR_STATUS2_CONV_SEQ_MASK 0x70 34 #define ADC5_USR_STATUS2_CONV_SEQ_MASK_SHIFT 0x5 35 36 #define ADC5_USR_IBAT_MEAS 0xf 37 #define ADC5_USR_IBAT_MEAS_SUPPORTED BIT(0) 38 39 #define ADC5_USR_DIG_PARAM 0x42 40 #define ADC5_USR_DIG_PARAM_CAL_VAL BIT(6) 41 #define ADC5_USR_DIG_PARAM_CAL_VAL_SHIFT 6 42 #define ADC5_USR_DIG_PARAM_CAL_SEL 0x30 43 #define ADC5_USR_DIG_PARAM_CAL_SEL_SHIFT 4 44 #define ADC5_USR_DIG_PARAM_DEC_RATIO_SEL 0xc 45 #define ADC5_USR_DIG_PARAM_DEC_RATIO_SEL_SHIFT 2 46 47 #define ADC5_USR_FAST_AVG_CTL 0x43 48 #define ADC5_USR_FAST_AVG_CTL_EN BIT(7) 49 #define ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK 0x7 50 51 #define ADC5_USR_CH_SEL_CTL 0x44 52 53 #define ADC5_USR_DELAY_CTL 0x45 54 #define ADC5_USR_HW_SETTLE_DELAY_MASK 0xf 55 56 #define ADC5_USR_EN_CTL1 0x46 57 #define ADC5_USR_EN_CTL1_ADC_EN BIT(7) 58 59 #define ADC5_USR_CONV_REQ 0x47 60 #define ADC5_USR_CONV_REQ_REQ BIT(7) 61 62 #define ADC5_USR_DATA0 0x50 63 64 #define ADC5_USR_DATA1 0x51 65 66 #define ADC5_USR_IBAT_DATA0 0x52 67 68 #define ADC5_USR_IBAT_DATA1 0x53 69 70 #define ADC_CHANNEL_OFFSET 0x8 71 #define ADC_CHANNEL_MASK GENMASK(7, 0) 72 73 /* 74 * Conversion time varies based on the decimation, clock rate, fast average 75 * samples and measurements queued across different VADC peripherals. 76 * Set the timeout to a max of 100ms. 77 */ 78 #define ADC5_CONV_TIME_MIN_US 263 79 #define ADC5_CONV_TIME_MAX_US 264 80 #define ADC5_CONV_TIME_RETRY 400 81 #define ADC5_CONV_TIMEOUT msecs_to_jiffies(100) 82 83 /* Digital version >= 5.3 supports hw_settle_2 */ 84 #define ADC5_HW_SETTLE_DIFF_MINOR 3 85 #define ADC5_HW_SETTLE_DIFF_MAJOR 5 86 87 /* For PMIC7 */ 88 #define ADC_APP_SID 0x40 89 #define ADC_APP_SID_MASK GENMASK(3, 0) 90 #define ADC7_CONV_TIMEOUT msecs_to_jiffies(10) 91 92 enum adc5_cal_method { 93 ADC5_NO_CAL = 0, 94 ADC5_RATIOMETRIC_CAL, 95 ADC5_ABSOLUTE_CAL 96 }; 97 98 enum adc5_cal_val { 99 ADC5_TIMER_CAL = 0, 100 ADC5_NEW_CAL 101 }; 102 103 /** 104 * struct adc5_channel_prop - ADC channel property. 105 * @channel: channel number, refer to the channel list. 106 * @cal_method: calibration method. 107 * @cal_val: calibration value 108 * @decimation: sampling rate supported for the channel. 109 * @sid: slave id of PMIC owning the channel, for PMIC7. 110 * @prescale: channel scaling performed on the input signal. 111 * @hw_settle_time: the time between AMUX being configured and the 112 * start of conversion. 113 * @avg_samples: ability to provide single result from the ADC 114 * that is an average of multiple measurements. 115 * @scale_fn_type: Represents the scaling function to convert voltage 116 * physical units desired by the client for the channel. 117 * @datasheet_name: Channel name used in device tree. 118 */ 119 struct adc5_channel_prop { 120 unsigned int channel; 121 enum adc5_cal_method cal_method; 122 enum adc5_cal_val cal_val; 123 unsigned int decimation; 124 unsigned int sid; 125 unsigned int prescale; 126 unsigned int hw_settle_time; 127 unsigned int avg_samples; 128 enum vadc_scale_fn_type scale_fn_type; 129 const char *datasheet_name; 130 }; 131 132 /** 133 * struct adc5_chip - ADC private structure. 134 * @regmap: SPMI ADC5 peripheral register map field. 135 * @dev: SPMI ADC5 device. 136 * @base: base address for the ADC peripheral. 137 * @nchannels: number of ADC channels. 138 * @chan_props: array of ADC channel properties. 139 * @iio_chans: array of IIO channels specification. 140 * @poll_eoc: use polling instead of interrupt. 141 * @complete: ADC result notification after interrupt is received. 142 * @lock: ADC lock for access to the peripheral. 143 * @data: software configuration data. 144 */ 145 struct adc5_chip { 146 struct regmap *regmap; 147 struct device *dev; 148 u16 base; 149 unsigned int nchannels; 150 struct adc5_channel_prop *chan_props; 151 struct iio_chan_spec *iio_chans; 152 bool poll_eoc; 153 struct completion complete; 154 struct mutex lock; 155 const struct adc5_data *data; 156 }; 157 158 static int adc5_read(struct adc5_chip *adc, u16 offset, u8 *data, int len) 159 { 160 return regmap_bulk_read(adc->regmap, adc->base + offset, data, len); 161 } 162 163 static int adc5_write(struct adc5_chip *adc, u16 offset, u8 *data, int len) 164 { 165 return regmap_bulk_write(adc->regmap, adc->base + offset, data, len); 166 } 167 168 static int adc5_masked_write(struct adc5_chip *adc, u16 offset, u8 mask, u8 val) 169 { 170 return regmap_update_bits(adc->regmap, adc->base + offset, mask, val); 171 } 172 173 static int adc5_read_voltage_data(struct adc5_chip *adc, u16 *data) 174 { 175 int ret; 176 u8 rslt_lsb, rslt_msb; 177 178 ret = adc5_read(adc, ADC5_USR_DATA0, &rslt_lsb, sizeof(rslt_lsb)); 179 if (ret) 180 return ret; 181 182 ret = adc5_read(adc, ADC5_USR_DATA1, &rslt_msb, sizeof(rslt_lsb)); 183 if (ret) 184 return ret; 185 186 *data = (rslt_msb << 8) | rslt_lsb; 187 188 if (*data == ADC5_USR_DATA_CHECK) { 189 dev_err(adc->dev, "Invalid data:0x%x\n", *data); 190 return -EINVAL; 191 } 192 193 dev_dbg(adc->dev, "voltage raw code:0x%x\n", *data); 194 195 return 0; 196 } 197 198 static int adc5_poll_wait_eoc(struct adc5_chip *adc) 199 { 200 unsigned int count, retry = ADC5_CONV_TIME_RETRY; 201 u8 status1; 202 int ret; 203 204 for (count = 0; count < retry; count++) { 205 ret = adc5_read(adc, ADC5_USR_STATUS1, &status1, 206 sizeof(status1)); 207 if (ret) 208 return ret; 209 210 status1 &= ADC5_USR_STATUS1_REQ_STS_EOC_MASK; 211 if (status1 == ADC5_USR_STATUS1_EOC) 212 return 0; 213 214 usleep_range(ADC5_CONV_TIME_MIN_US, ADC5_CONV_TIME_MAX_US); 215 } 216 217 return -ETIMEDOUT; 218 } 219 220 static void adc5_update_dig_param(struct adc5_chip *adc, 221 struct adc5_channel_prop *prop, u8 *data) 222 { 223 /* Update calibration value */ 224 *data &= ~ADC5_USR_DIG_PARAM_CAL_VAL; 225 *data |= (prop->cal_val << ADC5_USR_DIG_PARAM_CAL_VAL_SHIFT); 226 227 /* Update calibration select */ 228 *data &= ~ADC5_USR_DIG_PARAM_CAL_SEL; 229 *data |= (prop->cal_method << ADC5_USR_DIG_PARAM_CAL_SEL_SHIFT); 230 231 /* Update decimation ratio select */ 232 *data &= ~ADC5_USR_DIG_PARAM_DEC_RATIO_SEL; 233 *data |= (prop->decimation << ADC5_USR_DIG_PARAM_DEC_RATIO_SEL_SHIFT); 234 } 235 236 static int adc5_configure(struct adc5_chip *adc, 237 struct adc5_channel_prop *prop) 238 { 239 int ret; 240 u8 buf[6]; 241 242 /* Read registers 0x42 through 0x46 */ 243 ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); 244 if (ret) 245 return ret; 246 247 /* Digital param selection */ 248 adc5_update_dig_param(adc, prop, &buf[0]); 249 250 /* Update fast average sample value */ 251 buf[1] &= (u8) ~ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK; 252 buf[1] |= prop->avg_samples; 253 254 /* Select ADC channel */ 255 buf[2] = prop->channel; 256 257 /* Select HW settle delay for channel */ 258 buf[3] &= (u8) ~ADC5_USR_HW_SETTLE_DELAY_MASK; 259 buf[3] |= prop->hw_settle_time; 260 261 /* Select ADC enable */ 262 buf[4] |= ADC5_USR_EN_CTL1_ADC_EN; 263 264 /* Select CONV request */ 265 buf[5] |= ADC5_USR_CONV_REQ_REQ; 266 267 if (!adc->poll_eoc) 268 reinit_completion(&adc->complete); 269 270 return adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); 271 } 272 273 static int adc7_configure(struct adc5_chip *adc, 274 struct adc5_channel_prop *prop) 275 { 276 int ret; 277 u8 conv_req = 0, buf[4]; 278 279 ret = adc5_masked_write(adc, ADC_APP_SID, ADC_APP_SID_MASK, prop->sid); 280 if (ret) 281 return ret; 282 283 ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); 284 if (ret) 285 return ret; 286 287 /* Digital param selection */ 288 adc5_update_dig_param(adc, prop, &buf[0]); 289 290 /* Update fast average sample value */ 291 buf[1] &= ~ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK; 292 buf[1] |= prop->avg_samples; 293 294 /* Select ADC channel */ 295 buf[2] = prop->channel; 296 297 /* Select HW settle delay for channel */ 298 buf[3] &= ~ADC5_USR_HW_SETTLE_DELAY_MASK; 299 buf[3] |= prop->hw_settle_time; 300 301 /* Select CONV request */ 302 conv_req = ADC5_USR_CONV_REQ_REQ; 303 304 if (!adc->poll_eoc) 305 reinit_completion(&adc->complete); 306 307 ret = adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf)); 308 if (ret) 309 return ret; 310 311 return adc5_write(adc, ADC5_USR_CONV_REQ, &conv_req, 1); 312 } 313 314 static int adc5_do_conversion(struct adc5_chip *adc, 315 struct adc5_channel_prop *prop, 316 struct iio_chan_spec const *chan, 317 u16 *data_volt, u16 *data_cur) 318 { 319 int ret; 320 321 mutex_lock(&adc->lock); 322 323 ret = adc5_configure(adc, prop); 324 if (ret) { 325 dev_err(adc->dev, "ADC configure failed with %d\n", ret); 326 goto unlock; 327 } 328 329 if (adc->poll_eoc) { 330 ret = adc5_poll_wait_eoc(adc); 331 if (ret) { 332 dev_err(adc->dev, "EOC bit not set\n"); 333 goto unlock; 334 } 335 } else { 336 ret = wait_for_completion_timeout(&adc->complete, 337 ADC5_CONV_TIMEOUT); 338 if (!ret) { 339 dev_dbg(adc->dev, "Did not get completion timeout.\n"); 340 ret = adc5_poll_wait_eoc(adc); 341 if (ret) { 342 dev_err(adc->dev, "EOC bit not set\n"); 343 goto unlock; 344 } 345 } 346 } 347 348 ret = adc5_read_voltage_data(adc, data_volt); 349 unlock: 350 mutex_unlock(&adc->lock); 351 352 return ret; 353 } 354 355 static int adc7_do_conversion(struct adc5_chip *adc, 356 struct adc5_channel_prop *prop, 357 struct iio_chan_spec const *chan, 358 u16 *data_volt, u16 *data_cur) 359 { 360 int ret; 361 u8 status; 362 363 mutex_lock(&adc->lock); 364 365 ret = adc7_configure(adc, prop); 366 if (ret) { 367 dev_err(adc->dev, "ADC configure failed with %d\n", ret); 368 goto unlock; 369 } 370 371 /* No support for polling mode at present */ 372 wait_for_completion_timeout(&adc->complete, ADC7_CONV_TIMEOUT); 373 374 ret = adc5_read(adc, ADC5_USR_STATUS1, &status, 1); 375 if (ret) 376 goto unlock; 377 378 if (status & ADC5_USR_STATUS1_CONV_FAULT) { 379 dev_err(adc->dev, "Unexpected conversion fault\n"); 380 ret = -EIO; 381 goto unlock; 382 } 383 384 ret = adc5_read_voltage_data(adc, data_volt); 385 386 unlock: 387 mutex_unlock(&adc->lock); 388 389 return ret; 390 } 391 392 typedef int (*adc_do_conversion)(struct adc5_chip *adc, 393 struct adc5_channel_prop *prop, 394 struct iio_chan_spec const *chan, 395 u16 *data_volt, u16 *data_cur); 396 397 static irqreturn_t adc5_isr(int irq, void *dev_id) 398 { 399 struct adc5_chip *adc = dev_id; 400 401 complete(&adc->complete); 402 403 return IRQ_HANDLED; 404 } 405 406 static int adc5_fwnode_xlate(struct iio_dev *indio_dev, 407 const struct fwnode_reference_args *iiospec) 408 { 409 struct adc5_chip *adc = iio_priv(indio_dev); 410 int i; 411 412 for (i = 0; i < adc->nchannels; i++) 413 if (adc->chan_props[i].channel == iiospec->args[0]) 414 return i; 415 416 return -EINVAL; 417 } 418 419 static int adc7_fwnode_xlate(struct iio_dev *indio_dev, 420 const struct fwnode_reference_args *iiospec) 421 { 422 struct adc5_chip *adc = iio_priv(indio_dev); 423 int i, v_channel; 424 425 for (i = 0; i < adc->nchannels; i++) { 426 v_channel = (adc->chan_props[i].sid << ADC_CHANNEL_OFFSET) | 427 adc->chan_props[i].channel; 428 if (v_channel == iiospec->args[0]) 429 return i; 430 } 431 432 return -EINVAL; 433 } 434 435 static int adc_read_raw_common(struct iio_dev *indio_dev, 436 struct iio_chan_spec const *chan, int *val, int *val2, 437 long mask, adc_do_conversion do_conv) 438 { 439 struct adc5_chip *adc = iio_priv(indio_dev); 440 struct adc5_channel_prop *prop; 441 u16 adc_code_volt, adc_code_cur; 442 int ret; 443 444 prop = &adc->chan_props[chan->address]; 445 446 switch (mask) { 447 case IIO_CHAN_INFO_PROCESSED: 448 ret = do_conv(adc, prop, chan, 449 &adc_code_volt, &adc_code_cur); 450 if (ret) 451 return ret; 452 453 ret = qcom_adc5_hw_scale(prop->scale_fn_type, 454 prop->prescale, 455 adc->data, 456 adc_code_volt, val); 457 if (ret) 458 return ret; 459 460 return IIO_VAL_INT; 461 default: 462 return -EINVAL; 463 } 464 } 465 466 static int adc5_read_raw(struct iio_dev *indio_dev, 467 struct iio_chan_spec const *chan, int *val, int *val2, 468 long mask) 469 { 470 return adc_read_raw_common(indio_dev, chan, val, val2, 471 mask, adc5_do_conversion); 472 } 473 474 static int adc7_read_raw(struct iio_dev *indio_dev, 475 struct iio_chan_spec const *chan, int *val, int *val2, 476 long mask) 477 { 478 return adc_read_raw_common(indio_dev, chan, val, val2, 479 mask, adc7_do_conversion); 480 } 481 482 static const struct iio_info adc5_info = { 483 .read_raw = adc5_read_raw, 484 .fwnode_xlate = adc5_fwnode_xlate, 485 }; 486 487 static const struct iio_info adc7_info = { 488 .read_raw = adc7_read_raw, 489 .fwnode_xlate = adc7_fwnode_xlate, 490 }; 491 492 struct adc5_channels { 493 const char *datasheet_name; 494 unsigned int prescale_index; 495 enum iio_chan_type type; 496 long info_mask; 497 enum vadc_scale_fn_type scale_fn_type; 498 }; 499 500 /* In these definitions, _pre refers to an index into adc5_prescale_ratios. */ 501 #define ADC5_CHAN(_dname, _type, _mask, _pre, _scale) \ 502 { \ 503 .datasheet_name = _dname, \ 504 .prescale_index = _pre, \ 505 .type = _type, \ 506 .info_mask = _mask, \ 507 .scale_fn_type = _scale, \ 508 }, \ 509 510 #define ADC5_CHAN_TEMP(_dname, _pre, _scale) \ 511 ADC5_CHAN(_dname, IIO_TEMP, \ 512 BIT(IIO_CHAN_INFO_PROCESSED), \ 513 _pre, _scale) \ 514 515 #define ADC5_CHAN_VOLT(_dname, _pre, _scale) \ 516 ADC5_CHAN(_dname, IIO_VOLTAGE, \ 517 BIT(IIO_CHAN_INFO_PROCESSED), \ 518 _pre, _scale) \ 519 520 static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = { 521 [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0, 522 SCALE_HW_CALIB_DEFAULT) 523 [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, 524 SCALE_HW_CALIB_DEFAULT) 525 [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, 526 SCALE_HW_CALIB_DEFAULT) 527 [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, 528 SCALE_HW_CALIB_DEFAULT) 529 [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1, 530 SCALE_HW_CALIB_DEFAULT) 531 [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, 532 SCALE_HW_CALIB_PMIC_THERM) 533 [ADC5_USB_IN_I] = ADC5_CHAN_VOLT("usb_in_i_uv", 0, 534 SCALE_HW_CALIB_DEFAULT) 535 [ADC5_USB_IN_V_16] = ADC5_CHAN_VOLT("usb_in_v_div_16", 8, 536 SCALE_HW_CALIB_DEFAULT) 537 [ADC5_CHG_TEMP] = ADC5_CHAN_TEMP("chg_temp", 0, 538 SCALE_HW_CALIB_PM5_CHG_TEMP) 539 /* Charger prescales SBUx and MID_CHG to fit within 1.8V upper unit */ 540 [ADC5_SBUx] = ADC5_CHAN_VOLT("chg_sbux", 1, 541 SCALE_HW_CALIB_DEFAULT) 542 [ADC5_MID_CHG_DIV6] = ADC5_CHAN_VOLT("chg_mid_chg", 3, 543 SCALE_HW_CALIB_DEFAULT) 544 [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm", 0, 545 SCALE_HW_CALIB_XOTHERM) 546 [ADC5_BAT_ID_100K_PU] = ADC5_CHAN_TEMP("bat_id", 0, 547 SCALE_HW_CALIB_DEFAULT) 548 [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0, 549 SCALE_HW_CALIB_THERM_100K_PULLUP) 550 [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0, 551 SCALE_HW_CALIB_THERM_100K_PULLUP) 552 [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0, 553 SCALE_HW_CALIB_THERM_100K_PULLUP) 554 [ADC5_AMUX_THM2] = ADC5_CHAN_TEMP("amux_thm2", 0, 555 SCALE_HW_CALIB_PM5_SMB_TEMP) 556 [ADC5_GPIO1_100K_PU] = ADC5_CHAN_TEMP("gpio1_100k_pu", 0, 557 SCALE_HW_CALIB_THERM_100K_PULLUP) 558 [ADC5_GPIO3_100K_PU] = ADC5_CHAN_TEMP("gpio3_100k_pu", 0, 559 SCALE_HW_CALIB_THERM_100K_PULLUP) 560 [ADC5_GPIO4_100K_PU] = ADC5_CHAN_TEMP("gpio4_100k_pu", 0, 561 SCALE_HW_CALIB_THERM_100K_PULLUP) 562 }; 563 564 static const struct adc5_channels adc7_chans_pmic[ADC5_MAX_CHANNEL] = { 565 [ADC7_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0, 566 SCALE_HW_CALIB_DEFAULT) 567 [ADC7_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, 568 SCALE_HW_CALIB_DEFAULT) 569 [ADC7_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, 570 SCALE_HW_CALIB_DEFAULT) 571 [ADC7_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 3, 572 SCALE_HW_CALIB_DEFAULT) 573 [ADC7_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, 574 SCALE_HW_CALIB_PMIC_THERM_PM7) 575 [ADC7_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_pu2", 0, 576 SCALE_HW_CALIB_THERM_100K_PU_PM7) 577 [ADC7_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_pu2", 0, 578 SCALE_HW_CALIB_THERM_100K_PU_PM7) 579 [ADC7_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_pu2", 0, 580 SCALE_HW_CALIB_THERM_100K_PU_PM7) 581 [ADC7_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_pu2", 0, 582 SCALE_HW_CALIB_THERM_100K_PU_PM7) 583 [ADC7_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_pu2", 0, 584 SCALE_HW_CALIB_THERM_100K_PU_PM7) 585 [ADC7_AMUX_THM6_100K_PU] = ADC5_CHAN_TEMP("amux_thm6_pu2", 0, 586 SCALE_HW_CALIB_THERM_100K_PU_PM7) 587 [ADC7_GPIO1_100K_PU] = ADC5_CHAN_TEMP("gpio1_pu2", 0, 588 SCALE_HW_CALIB_THERM_100K_PU_PM7) 589 [ADC7_GPIO2_100K_PU] = ADC5_CHAN_TEMP("gpio2_pu2", 0, 590 SCALE_HW_CALIB_THERM_100K_PU_PM7) 591 [ADC7_GPIO3_100K_PU] = ADC5_CHAN_TEMP("gpio3_pu2", 0, 592 SCALE_HW_CALIB_THERM_100K_PU_PM7) 593 [ADC7_GPIO4_100K_PU] = ADC5_CHAN_TEMP("gpio4_pu2", 0, 594 SCALE_HW_CALIB_THERM_100K_PU_PM7) 595 }; 596 597 static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = { 598 [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0, 599 SCALE_HW_CALIB_DEFAULT) 600 [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0, 601 SCALE_HW_CALIB_DEFAULT) 602 [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0, 603 SCALE_HW_CALIB_DEFAULT) 604 [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1, 605 SCALE_HW_CALIB_DEFAULT) 606 [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1, 607 SCALE_HW_CALIB_DEFAULT) 608 [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1, 609 SCALE_HW_CALIB_DEFAULT) 610 [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0, 611 SCALE_HW_CALIB_PMIC_THERM) 612 [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0, 613 SCALE_HW_CALIB_THERM_100K_PULLUP) 614 [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0, 615 SCALE_HW_CALIB_THERM_100K_PULLUP) 616 [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0, 617 SCALE_HW_CALIB_THERM_100K_PULLUP) 618 [ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 0, 619 SCALE_HW_CALIB_THERM_100K_PULLUP) 620 [ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 0, 621 SCALE_HW_CALIB_THERM_100K_PULLUP) 622 [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm_100k_pu", 0, 623 SCALE_HW_CALIB_THERM_100K_PULLUP) 624 }; 625 626 static int adc5_get_fw_channel_data(struct adc5_chip *adc, 627 struct adc5_channel_prop *prop, 628 struct fwnode_handle *fwnode, 629 const struct adc5_data *data) 630 { 631 const char *channel_name; 632 char *name; 633 u32 chan, value, varr[2]; 634 u32 sid = 0; 635 int ret; 636 struct device *dev = adc->dev; 637 638 name = devm_kasprintf(dev, GFP_KERNEL, "%pfwP", fwnode); 639 if (!name) 640 return -ENOMEM; 641 642 /* Cut the address part */ 643 name[strchrnul(name, '@') - name] = '\0'; 644 645 ret = fwnode_property_read_u32(fwnode, "reg", &chan); 646 if (ret) { 647 dev_err(dev, "invalid channel number %s\n", name); 648 return ret; 649 } 650 651 /* Value read from "reg" is virtual channel number */ 652 653 /* virtual channel number = sid << 8 | channel number */ 654 655 if (adc->data->info == &adc7_info) { 656 sid = chan >> ADC_CHANNEL_OFFSET; 657 chan = chan & ADC_CHANNEL_MASK; 658 } 659 660 if (chan > ADC5_PARALLEL_ISENSE_VBAT_IDATA || 661 !data->adc_chans[chan].datasheet_name) { 662 dev_err(dev, "%s invalid channel number %d\n", name, chan); 663 return -EINVAL; 664 } 665 666 /* the channel has DT description */ 667 prop->channel = chan; 668 prop->sid = sid; 669 670 ret = fwnode_property_read_string(fwnode, "label", &channel_name); 671 if (ret) 672 channel_name = name; 673 674 prop->datasheet_name = channel_name; 675 676 ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value); 677 if (!ret) { 678 ret = qcom_adc5_decimation_from_dt(value, data->decimation); 679 if (ret < 0) { 680 dev_err(dev, "%02x invalid decimation %d\n", 681 chan, value); 682 return ret; 683 } 684 prop->decimation = ret; 685 } else { 686 prop->decimation = ADC5_DECIMATION_DEFAULT; 687 } 688 689 ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2); 690 if (!ret) { 691 ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]); 692 if (ret < 0) { 693 dev_err(dev, "%02x invalid pre-scaling <%d %d>\n", 694 chan, varr[0], varr[1]); 695 return ret; 696 } 697 prop->prescale = ret; 698 } else { 699 prop->prescale = 700 adc->data->adc_chans[prop->channel].prescale_index; 701 } 702 703 ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value); 704 if (!ret) { 705 u8 dig_version[2]; 706 707 ret = adc5_read(adc, ADC5_USR_REVISION1, dig_version, 708 sizeof(dig_version)); 709 if (ret) { 710 dev_err(dev, "Invalid dig version read %d\n", ret); 711 return ret; 712 } 713 714 dev_dbg(dev, "dig_ver:minor:%d, major:%d\n", dig_version[0], 715 dig_version[1]); 716 /* Digital controller >= 5.3 have hw_settle_2 option */ 717 if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR && 718 dig_version[1] >= ADC5_HW_SETTLE_DIFF_MAJOR) || 719 adc->data->info == &adc7_info) 720 ret = qcom_adc5_hw_settle_time_from_dt(value, data->hw_settle_2); 721 else 722 ret = qcom_adc5_hw_settle_time_from_dt(value, data->hw_settle_1); 723 724 if (ret < 0) { 725 dev_err(dev, "%02x invalid hw-settle-time %d us\n", 726 chan, value); 727 return ret; 728 } 729 prop->hw_settle_time = ret; 730 } else { 731 prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME; 732 } 733 734 ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value); 735 if (!ret) { 736 ret = qcom_adc5_avg_samples_from_dt(value); 737 if (ret < 0) { 738 dev_err(dev, "%02x invalid avg-samples %d\n", 739 chan, value); 740 return ret; 741 } 742 prop->avg_samples = ret; 743 } else { 744 prop->avg_samples = VADC_DEF_AVG_SAMPLES; 745 } 746 747 if (fwnode_property_read_bool(fwnode, "qcom,ratiometric")) 748 prop->cal_method = ADC5_RATIOMETRIC_CAL; 749 else 750 prop->cal_method = ADC5_ABSOLUTE_CAL; 751 752 /* 753 * Default to using timer calibration. Using a fresh calibration value 754 * for every conversion will increase the overall time for a request. 755 */ 756 prop->cal_val = ADC5_TIMER_CAL; 757 758 dev_dbg(dev, "%02x name %s\n", chan, name); 759 760 return 0; 761 } 762 763 static const struct adc5_data adc5_data_pmic = { 764 .full_scale_code_volt = 0x70e4, 765 .full_scale_code_cur = 0x2710, 766 .adc_chans = adc5_chans_pmic, 767 .info = &adc5_info, 768 .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX]) 769 {250, 420, 840}, 770 .hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) 771 {15, 100, 200, 300, 400, 500, 600, 700, 772 800, 900, 1, 2, 4, 6, 8, 10}, 773 .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) 774 {15, 100, 200, 300, 400, 500, 600, 700, 775 1, 2, 4, 8, 16, 32, 64, 128}, 776 }; 777 778 static const struct adc5_data adc7_data_pmic = { 779 .full_scale_code_volt = 0x70e4, 780 .adc_chans = adc7_chans_pmic, 781 .info = &adc7_info, 782 .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX]) 783 {85, 340, 1360}, 784 .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) 785 {15, 100, 200, 300, 400, 500, 600, 700, 786 1000, 2000, 4000, 8000, 16000, 32000, 787 64000, 128000}, 788 }; 789 790 static const struct adc5_data adc5_data_pmic_rev2 = { 791 .full_scale_code_volt = 0x4000, 792 .full_scale_code_cur = 0x1800, 793 .adc_chans = adc5_chans_rev2, 794 .info = &adc5_info, 795 .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX]) 796 {256, 512, 1024}, 797 .hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) 798 {0, 100, 200, 300, 400, 500, 600, 700, 799 800, 900, 1, 2, 4, 6, 8, 10}, 800 .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX]) 801 {15, 100, 200, 300, 400, 500, 600, 700, 802 1, 2, 4, 8, 16, 32, 64, 128}, 803 }; 804 805 static const struct of_device_id adc5_match_table[] = { 806 { 807 .compatible = "qcom,spmi-adc5", 808 .data = &adc5_data_pmic, 809 }, 810 { 811 .compatible = "qcom,spmi-adc7", 812 .data = &adc7_data_pmic, 813 }, 814 { 815 .compatible = "qcom,spmi-adc-rev2", 816 .data = &adc5_data_pmic_rev2, 817 }, 818 { } 819 }; 820 MODULE_DEVICE_TABLE(of, adc5_match_table); 821 822 static int adc5_get_fw_data(struct adc5_chip *adc) 823 { 824 const struct adc5_channels *adc_chan; 825 struct iio_chan_spec *iio_chan; 826 struct adc5_channel_prop prop, *chan_props; 827 struct fwnode_handle *child; 828 unsigned int index = 0; 829 int ret; 830 831 adc->nchannels = device_get_child_node_count(adc->dev); 832 if (!adc->nchannels) 833 return -EINVAL; 834 835 adc->iio_chans = devm_kcalloc(adc->dev, adc->nchannels, 836 sizeof(*adc->iio_chans), GFP_KERNEL); 837 if (!adc->iio_chans) 838 return -ENOMEM; 839 840 adc->chan_props = devm_kcalloc(adc->dev, adc->nchannels, 841 sizeof(*adc->chan_props), GFP_KERNEL); 842 if (!adc->chan_props) 843 return -ENOMEM; 844 845 chan_props = adc->chan_props; 846 iio_chan = adc->iio_chans; 847 adc->data = device_get_match_data(adc->dev); 848 if (!adc->data) 849 adc->data = &adc5_data_pmic; 850 851 device_for_each_child_node(adc->dev, child) { 852 ret = adc5_get_fw_channel_data(adc, &prop, child, adc->data); 853 if (ret) { 854 fwnode_handle_put(child); 855 return ret; 856 } 857 858 prop.scale_fn_type = 859 adc->data->adc_chans[prop.channel].scale_fn_type; 860 *chan_props = prop; 861 adc_chan = &adc->data->adc_chans[prop.channel]; 862 863 iio_chan->channel = prop.channel; 864 iio_chan->datasheet_name = prop.datasheet_name; 865 iio_chan->extend_name = prop.datasheet_name; 866 iio_chan->info_mask_separate = adc_chan->info_mask; 867 iio_chan->type = adc_chan->type; 868 iio_chan->address = index; 869 iio_chan++; 870 chan_props++; 871 index++; 872 } 873 874 return 0; 875 } 876 877 static int adc5_probe(struct platform_device *pdev) 878 { 879 struct device *dev = &pdev->dev; 880 struct iio_dev *indio_dev; 881 struct adc5_chip *adc; 882 struct regmap *regmap; 883 int ret, irq_eoc; 884 u32 reg; 885 886 regmap = dev_get_regmap(dev->parent, NULL); 887 if (!regmap) 888 return -ENODEV; 889 890 ret = device_property_read_u32(dev, "reg", ®); 891 if (ret < 0) 892 return ret; 893 894 indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); 895 if (!indio_dev) 896 return -ENOMEM; 897 898 adc = iio_priv(indio_dev); 899 adc->regmap = regmap; 900 adc->dev = dev; 901 adc->base = reg; 902 903 init_completion(&adc->complete); 904 mutex_init(&adc->lock); 905 906 ret = adc5_get_fw_data(adc); 907 if (ret) 908 return dev_err_probe(dev, ret, "adc get dt data failed\n"); 909 910 irq_eoc = platform_get_irq(pdev, 0); 911 if (irq_eoc < 0) { 912 if (irq_eoc == -EPROBE_DEFER || irq_eoc == -EINVAL) 913 return irq_eoc; 914 adc->poll_eoc = true; 915 } else { 916 ret = devm_request_irq(dev, irq_eoc, adc5_isr, 0, 917 "pm-adc5", adc); 918 if (ret) 919 return ret; 920 } 921 922 indio_dev->name = pdev->name; 923 indio_dev->modes = INDIO_DIRECT_MODE; 924 indio_dev->info = adc->data->info; 925 indio_dev->channels = adc->iio_chans; 926 indio_dev->num_channels = adc->nchannels; 927 928 return devm_iio_device_register(dev, indio_dev); 929 } 930 931 static struct platform_driver adc5_driver = { 932 .driver = { 933 .name = "qcom-spmi-adc5", 934 .of_match_table = adc5_match_table, 935 }, 936 .probe = adc5_probe, 937 }; 938 module_platform_driver(adc5_driver); 939 940 MODULE_ALIAS("platform:qcom-spmi-adc5"); 941 MODULE_DESCRIPTION("Qualcomm Technologies Inc. PMIC5 ADC driver"); 942 MODULE_LICENSE("GPL v2"); 943