xref: /openbmc/linux/drivers/iio/adc/mcp3911.c (revision b60a5b8d)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Driver for Microchip MCP3911, Two-channel Analog Front End
4  *
5  * Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com>
6  * Copyright (C) 2018 Kent Gustavsson <kent@minoris.se>
7  */
8 #include <linux/clk.h>
9 #include <linux/delay.h>
10 #include <linux/err.h>
11 #include <linux/iio/iio.h>
12 #include <linux/module.h>
13 #include <linux/regulator/consumer.h>
14 #include <linux/spi/spi.h>
15 
16 #define MCP3911_REG_CHANNEL0		0x00
17 #define MCP3911_REG_CHANNEL1		0x03
18 #define MCP3911_REG_MOD			0x06
19 #define MCP3911_REG_PHASE		0x07
20 #define MCP3911_REG_GAIN		0x09
21 
22 #define MCP3911_REG_STATUSCOM		0x0a
23 #define MCP3911_STATUSCOM_CH1_24WIDTH	BIT(4)
24 #define MCP3911_STATUSCOM_CH0_24WIDTH	BIT(3)
25 #define MCP3911_STATUSCOM_EN_OFFCAL	BIT(2)
26 #define MCP3911_STATUSCOM_EN_GAINCAL	BIT(1)
27 
28 #define MCP3911_REG_CONFIG		0x0c
29 #define MCP3911_CONFIG_CLKEXT		BIT(1)
30 #define MCP3911_CONFIG_VREFEXT		BIT(2)
31 
32 #define MCP3911_REG_OFFCAL_CH0		0x0e
33 #define MCP3911_REG_GAINCAL_CH0		0x11
34 #define MCP3911_REG_OFFCAL_CH1		0x14
35 #define MCP3911_REG_GAINCAL_CH1		0x17
36 #define MCP3911_REG_VREFCAL		0x1a
37 
38 #define MCP3911_CHANNEL(x)		(MCP3911_REG_CHANNEL0 + x * 3)
39 #define MCP3911_OFFCAL(x)		(MCP3911_REG_OFFCAL_CH0 + x * 6)
40 
41 /* Internal voltage reference in uV */
42 #define MCP3911_INT_VREF_UV		1200000
43 
44 #define MCP3911_REG_READ(reg, id)	((((reg) << 1) | ((id) << 5) | (1 << 0)) & 0xff)
45 #define MCP3911_REG_WRITE(reg, id)	((((reg) << 1) | ((id) << 5) | (0 << 0)) & 0xff)
46 
47 #define MCP3911_NUM_CHANNELS		2
48 
49 struct mcp3911 {
50 	struct spi_device *spi;
51 	struct mutex lock;
52 	struct regulator *vref;
53 	struct clk *clki;
54 	u32 dev_addr;
55 };
56 
57 static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len)
58 {
59 	int ret;
60 
61 	reg = MCP3911_REG_READ(reg, adc->dev_addr);
62 	ret = spi_write_then_read(adc->spi, &reg, 1, val, len);
63 	if (ret < 0)
64 		return ret;
65 
66 	be32_to_cpus(val);
67 	*val >>= ((4 - len) * 8);
68 	dev_dbg(&adc->spi->dev, "reading 0x%x from register 0x%x\n", *val,
69 		reg >> 1);
70 	return ret;
71 }
72 
73 static int mcp3911_write(struct mcp3911 *adc, u8 reg, u32 val, u8 len)
74 {
75 	dev_dbg(&adc->spi->dev, "writing 0x%x to register 0x%x\n", val, reg);
76 
77 	val <<= (3 - len) * 8;
78 	cpu_to_be32s(&val);
79 	val |= MCP3911_REG_WRITE(reg, adc->dev_addr);
80 
81 	return spi_write(adc->spi, &val, len + 1);
82 }
83 
84 static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask,
85 		u32 val, u8 len)
86 {
87 	u32 tmp;
88 	int ret;
89 
90 	ret = mcp3911_read(adc, reg, &tmp, len);
91 	if (ret)
92 		return ret;
93 
94 	val &= mask;
95 	val |= tmp & ~mask;
96 	return mcp3911_write(adc, reg, val, len);
97 }
98 
99 static int mcp3911_read_raw(struct iio_dev *indio_dev,
100 			    struct iio_chan_spec const *channel, int *val,
101 			    int *val2, long mask)
102 {
103 	struct mcp3911 *adc = iio_priv(indio_dev);
104 	int ret = -EINVAL;
105 
106 	mutex_lock(&adc->lock);
107 	switch (mask) {
108 	case IIO_CHAN_INFO_RAW:
109 		ret = mcp3911_read(adc,
110 				   MCP3911_CHANNEL(channel->channel), val, 3);
111 		if (ret)
112 			goto out;
113 
114 		ret = IIO_VAL_INT;
115 		break;
116 
117 	case IIO_CHAN_INFO_OFFSET:
118 		ret = mcp3911_read(adc,
119 				   MCP3911_OFFCAL(channel->channel), val, 3);
120 		if (ret)
121 			goto out;
122 
123 		ret = IIO_VAL_INT;
124 		break;
125 
126 	case IIO_CHAN_INFO_SCALE:
127 		if (adc->vref) {
128 			ret = regulator_get_voltage(adc->vref);
129 			if (ret < 0) {
130 				dev_err(indio_dev->dev.parent,
131 					"failed to get vref voltage: %d\n",
132 				       ret);
133 				goto out;
134 			}
135 
136 			*val = ret / 1000;
137 		} else {
138 			*val = MCP3911_INT_VREF_UV;
139 		}
140 
141 		*val2 = 24;
142 		ret = IIO_VAL_FRACTIONAL_LOG2;
143 		break;
144 	}
145 
146 out:
147 	mutex_unlock(&adc->lock);
148 	return ret;
149 }
150 
151 static int mcp3911_write_raw(struct iio_dev *indio_dev,
152 			    struct iio_chan_spec const *channel, int val,
153 			    int val2, long mask)
154 {
155 	struct mcp3911 *adc = iio_priv(indio_dev);
156 	int ret = -EINVAL;
157 
158 	mutex_lock(&adc->lock);
159 	switch (mask) {
160 	case IIO_CHAN_INFO_OFFSET:
161 		if (val2 != 0) {
162 			ret = -EINVAL;
163 			goto out;
164 		}
165 
166 		/* Write offset */
167 		ret = mcp3911_write(adc, MCP3911_OFFCAL(channel->channel), val,
168 				    3);
169 		if (ret)
170 			goto out;
171 
172 		/* Enable offset*/
173 		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM,
174 				MCP3911_STATUSCOM_EN_OFFCAL,
175 				MCP3911_STATUSCOM_EN_OFFCAL, 2);
176 		break;
177 	}
178 
179 out:
180 	mutex_unlock(&adc->lock);
181 	return ret;
182 }
183 
184 #define MCP3911_CHAN(idx) {					\
185 		.type = IIO_VOLTAGE,				\
186 		.indexed = 1,					\
187 		.channel = idx,					\
188 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
189 			BIT(IIO_CHAN_INFO_OFFSET) |		\
190 			BIT(IIO_CHAN_INFO_SCALE),		\
191 }
192 
193 static const struct iio_chan_spec mcp3911_channels[] = {
194 	MCP3911_CHAN(0),
195 	MCP3911_CHAN(1),
196 };
197 
198 static const struct iio_info mcp3911_info = {
199 	.read_raw = mcp3911_read_raw,
200 	.write_raw = mcp3911_write_raw,
201 };
202 
203 static int mcp3911_config(struct mcp3911 *adc, struct device_node *of_node)
204 {
205 	u32 configreg;
206 	int ret;
207 
208 	of_property_read_u32(of_node, "device-addr", &adc->dev_addr);
209 	if (adc->dev_addr > 3) {
210 		dev_err(&adc->spi->dev,
211 			"invalid device address (%i). Must be in range 0-3.\n",
212 			adc->dev_addr);
213 		return -EINVAL;
214 	}
215 	dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
216 
217 	ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &configreg, 2);
218 	if (ret)
219 		return ret;
220 
221 	if (adc->vref) {
222 		dev_dbg(&adc->spi->dev, "use external voltage reference\n");
223 		configreg |= MCP3911_CONFIG_VREFEXT;
224 	} else {
225 		dev_dbg(&adc->spi->dev,
226 			"use internal voltage reference (1.2V)\n");
227 		configreg &= ~MCP3911_CONFIG_VREFEXT;
228 	}
229 
230 	if (adc->clki) {
231 		dev_dbg(&adc->spi->dev, "use external clock as clocksource\n");
232 		configreg |= MCP3911_CONFIG_CLKEXT;
233 	} else {
234 		dev_dbg(&adc->spi->dev,
235 			"use crystal oscillator as clocksource\n");
236 		configreg &= ~MCP3911_CONFIG_CLKEXT;
237 	}
238 
239 	return  mcp3911_write(adc, MCP3911_REG_CONFIG, configreg, 2);
240 }
241 
242 static int mcp3911_probe(struct spi_device *spi)
243 {
244 	struct iio_dev *indio_dev;
245 	struct mcp3911 *adc;
246 	int ret;
247 
248 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
249 	if (!indio_dev)
250 		return -ENOMEM;
251 
252 	adc = iio_priv(indio_dev);
253 	adc->spi = spi;
254 
255 	adc->vref = devm_regulator_get_optional(&adc->spi->dev, "vref");
256 	if (IS_ERR(adc->vref)) {
257 		if (PTR_ERR(adc->vref) == -ENODEV) {
258 			adc->vref = NULL;
259 		} else {
260 			dev_err(&adc->spi->dev,
261 				"failed to get regulator (%ld)\n",
262 				PTR_ERR(adc->vref));
263 			return PTR_ERR(adc->vref);
264 		}
265 
266 	} else {
267 		ret = regulator_enable(adc->vref);
268 		if (ret)
269 			return ret;
270 	}
271 
272 	adc->clki = devm_clk_get(&adc->spi->dev, NULL);
273 	if (IS_ERR(adc->clki)) {
274 		if (PTR_ERR(adc->clki) == -ENOENT) {
275 			adc->clki = NULL;
276 		} else {
277 			dev_err(&adc->spi->dev,
278 				"failed to get adc clk (%ld)\n",
279 				PTR_ERR(adc->clki));
280 			ret = PTR_ERR(adc->clki);
281 			goto reg_disable;
282 		}
283 	} else {
284 		ret = clk_prepare_enable(adc->clki);
285 		if (ret < 0) {
286 			dev_err(&adc->spi->dev,
287 				"Failed to enable clki: %d\n", ret);
288 			goto reg_disable;
289 		}
290 	}
291 
292 	ret = mcp3911_config(adc, spi->dev.of_node);
293 	if (ret)
294 		goto clk_disable;
295 
296 	indio_dev->dev.parent = &spi->dev;
297 	indio_dev->dev.of_node = spi->dev.of_node;
298 	indio_dev->name = spi_get_device_id(spi)->name;
299 	indio_dev->modes = INDIO_DIRECT_MODE;
300 	indio_dev->info = &mcp3911_info;
301 	spi_set_drvdata(spi, indio_dev);
302 
303 	indio_dev->channels = mcp3911_channels;
304 	indio_dev->num_channels = ARRAY_SIZE(mcp3911_channels);
305 
306 	mutex_init(&adc->lock);
307 
308 	ret = iio_device_register(indio_dev);
309 	if (ret)
310 		goto clk_disable;
311 
312 	return ret;
313 
314 clk_disable:
315 	clk_disable_unprepare(adc->clki);
316 reg_disable:
317 	if (adc->vref)
318 		regulator_disable(adc->vref);
319 
320 	return ret;
321 }
322 
323 static int mcp3911_remove(struct spi_device *spi)
324 {
325 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
326 	struct mcp3911 *adc = iio_priv(indio_dev);
327 
328 	iio_device_unregister(indio_dev);
329 
330 	clk_disable_unprepare(adc->clki);
331 	if (adc->vref)
332 		regulator_disable(adc->vref);
333 
334 	return 0;
335 }
336 
337 static const struct of_device_id mcp3911_dt_ids[] = {
338 	{ .compatible = "microchip,mcp3911" },
339 	{ }
340 };
341 MODULE_DEVICE_TABLE(of, mcp3911_dt_ids);
342 
343 static const struct spi_device_id mcp3911_id[] = {
344 	{ "mcp3911", 0 },
345 	{ }
346 };
347 MODULE_DEVICE_TABLE(spi, mcp3911_id);
348 
349 static struct spi_driver mcp3911_driver = {
350 	.driver = {
351 		.name = "mcp3911",
352 		.of_match_table = mcp3911_dt_ids,
353 	},
354 	.probe = mcp3911_probe,
355 	.remove = mcp3911_remove,
356 	.id_table = mcp3911_id,
357 };
358 module_spi_driver(mcp3911_driver);
359 
360 MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@gmail.com>");
361 MODULE_AUTHOR("Kent Gustavsson <kent@minoris.se>");
362 MODULE_DESCRIPTION("Microchip Technology MCP3911");
363 MODULE_LICENSE("GPL v2");
364