xref: /openbmc/linux/drivers/iio/adc/mcp3911.c (revision 18da174d)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Driver for Microchip MCP3911, Two-channel Analog Front End
4  *
5  * Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com>
6  * Copyright (C) 2018 Kent Gustavsson <kent@minoris.se>
7  */
8 #include <linux/bitfield.h>
9 #include <linux/bits.h>
10 #include <linux/clk.h>
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/module.h>
14 #include <linux/mod_devicetable.h>
15 #include <linux/property.h>
16 #include <linux/regulator/consumer.h>
17 #include <linux/spi/spi.h>
18 
19 #include <linux/iio/iio.h>
20 #include <linux/iio/buffer.h>
21 #include <linux/iio/triggered_buffer.h>
22 #include <linux/iio/trigger_consumer.h>
23 #include <linux/iio/trigger.h>
24 
25 #include <asm/unaligned.h>
26 
27 #define MCP3911_REG_CHANNEL0		0x00
28 #define MCP3911_REG_CHANNEL1		0x03
29 #define MCP3911_REG_MOD			0x06
30 #define MCP3911_REG_PHASE		0x07
31 #define MCP3911_REG_GAIN		0x09
32 #define MCP3911_GAIN_MASK(ch)		(GENMASK(2, 0) << 3 * ch)
33 #define MCP3911_GAIN_VAL(ch, val)      ((val << 3 * ch) & MCP3911_GAIN_MASK(ch))
34 
35 #define MCP3911_REG_STATUSCOM		0x0a
36 #define MCP3911_STATUSCOM_DRHIZ         BIT(12)
37 #define MCP3911_STATUSCOM_READ		GENMASK(7, 6)
38 #define MCP3911_STATUSCOM_CH1_24WIDTH	BIT(4)
39 #define MCP3911_STATUSCOM_CH0_24WIDTH	BIT(3)
40 #define MCP3911_STATUSCOM_EN_OFFCAL	BIT(2)
41 #define MCP3911_STATUSCOM_EN_GAINCAL	BIT(1)
42 
43 #define MCP3911_REG_CONFIG		0x0c
44 #define MCP3911_CONFIG_CLKEXT		BIT(1)
45 #define MCP3911_CONFIG_VREFEXT		BIT(2)
46 #define MCP3911_CONFIG_OSR		GENMASK(13, 11)
47 
48 #define MCP3911_REG_OFFCAL_CH0		0x0e
49 #define MCP3911_REG_GAINCAL_CH0		0x11
50 #define MCP3911_REG_OFFCAL_CH1		0x14
51 #define MCP3911_REG_GAINCAL_CH1		0x17
52 #define MCP3911_REG_VREFCAL		0x1a
53 
54 #define MCP3911_CHANNEL(x)		(MCP3911_REG_CHANNEL0 + x * 3)
55 #define MCP3911_OFFCAL(x)		(MCP3911_REG_OFFCAL_CH0 + x * 6)
56 
57 /* Internal voltage reference in mV */
58 #define MCP3911_INT_VREF_MV		1200
59 
60 #define MCP3911_REG_READ(reg, id)	((((reg) << 1) | ((id) << 6) | (1 << 0)) & 0xff)
61 #define MCP3911_REG_WRITE(reg, id)	((((reg) << 1) | ((id) << 6) | (0 << 0)) & 0xff)
62 #define MCP3911_REG_MASK		GENMASK(4, 1)
63 
64 #define MCP3911_NUM_CHANNELS		2
65 #define MCP3911_NUM_SCALES		6
66 
67 static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 };
68 static u32 mcp3911_scale_table[MCP3911_NUM_SCALES][2];
69 
70 struct mcp3911 {
71 	struct spi_device *spi;
72 	struct mutex lock;
73 	struct regulator *vref;
74 	struct clk *clki;
75 	u32 dev_addr;
76 	struct iio_trigger *trig;
77 	u32 gain[MCP3911_NUM_CHANNELS];
78 	struct {
79 		u32 channels[MCP3911_NUM_CHANNELS];
80 		s64 ts __aligned(8);
81 	} scan;
82 
83 	u8 tx_buf __aligned(IIO_DMA_MINALIGN);
84 	u8 rx_buf[MCP3911_NUM_CHANNELS * 3];
85 };
86 
87 static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len)
88 {
89 	int ret;
90 
91 	reg = MCP3911_REG_READ(reg, adc->dev_addr);
92 	ret = spi_write_then_read(adc->spi, &reg, 1, val, len);
93 	if (ret < 0)
94 		return ret;
95 
96 	be32_to_cpus(val);
97 	*val >>= ((4 - len) * 8);
98 	dev_dbg(&adc->spi->dev, "reading 0x%x from register 0x%lx\n", *val,
99 		FIELD_GET(MCP3911_REG_MASK, reg));
100 	return ret;
101 }
102 
103 static int mcp3911_write(struct mcp3911 *adc, u8 reg, u32 val, u8 len)
104 {
105 	dev_dbg(&adc->spi->dev, "writing 0x%x to register 0x%x\n", val, reg);
106 
107 	val <<= (3 - len) * 8;
108 	cpu_to_be32s(&val);
109 	val |= MCP3911_REG_WRITE(reg, adc->dev_addr);
110 
111 	return spi_write(adc->spi, &val, len + 1);
112 }
113 
114 static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask,
115 		u32 val, u8 len)
116 {
117 	u32 tmp;
118 	int ret;
119 
120 	ret = mcp3911_read(adc, reg, &tmp, len);
121 	if (ret)
122 		return ret;
123 
124 	val &= mask;
125 	val |= tmp & ~mask;
126 	return mcp3911_write(adc, reg, val, len);
127 }
128 
129 static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev,
130 					struct iio_chan_spec const *chan,
131 					long mask)
132 {
133 	switch (mask) {
134 	case IIO_CHAN_INFO_SCALE:
135 		return IIO_VAL_INT_PLUS_NANO;
136 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
137 		return IIO_VAL_INT;
138 	default:
139 		return IIO_VAL_INT_PLUS_NANO;
140 	}
141 }
142 
143 static int mcp3911_read_avail(struct iio_dev *indio_dev,
144 			     struct iio_chan_spec const *chan,
145 			     const int **vals, int *type, int *length,
146 			     long info)
147 {
148 	switch (info) {
149 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
150 		*type = IIO_VAL_INT;
151 		*vals = mcp3911_osr_table;
152 		*length = ARRAY_SIZE(mcp3911_osr_table);
153 		return IIO_AVAIL_LIST;
154 	case IIO_CHAN_INFO_SCALE:
155 		*type = IIO_VAL_INT_PLUS_NANO;
156 		*vals = (int *)mcp3911_scale_table;
157 		*length = ARRAY_SIZE(mcp3911_scale_table) * 2;
158 		return IIO_AVAIL_LIST;
159 	default:
160 		return -EINVAL;
161 	}
162 }
163 
164 static int mcp3911_read_raw(struct iio_dev *indio_dev,
165 			    struct iio_chan_spec const *channel, int *val,
166 			    int *val2, long mask)
167 {
168 	struct mcp3911 *adc = iio_priv(indio_dev);
169 	int ret = -EINVAL;
170 
171 	mutex_lock(&adc->lock);
172 	switch (mask) {
173 	case IIO_CHAN_INFO_RAW:
174 		ret = mcp3911_read(adc,
175 				   MCP3911_CHANNEL(channel->channel), val, 3);
176 		if (ret)
177 			goto out;
178 
179 		*val = sign_extend32(*val, 23);
180 
181 		ret = IIO_VAL_INT;
182 		break;
183 
184 	case IIO_CHAN_INFO_OFFSET:
185 		ret = mcp3911_read(adc,
186 				   MCP3911_OFFCAL(channel->channel), val, 3);
187 		if (ret)
188 			goto out;
189 
190 		ret = IIO_VAL_INT;
191 		break;
192 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
193 		ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
194 		if (ret)
195 			goto out;
196 
197 		*val = FIELD_GET(MCP3911_CONFIG_OSR, *val);
198 		*val = 32 << *val;
199 		ret = IIO_VAL_INT;
200 		break;
201 
202 	case IIO_CHAN_INFO_SCALE:
203 		*val = mcp3911_scale_table[ilog2(adc->gain[channel->channel])][0];
204 		*val2 = mcp3911_scale_table[ilog2(adc->gain[channel->channel])][1];
205 		ret = IIO_VAL_INT_PLUS_NANO;
206 		break;
207 	}
208 
209 out:
210 	mutex_unlock(&adc->lock);
211 	return ret;
212 }
213 
214 static int mcp3911_write_raw(struct iio_dev *indio_dev,
215 			    struct iio_chan_spec const *channel, int val,
216 			    int val2, long mask)
217 {
218 	struct mcp3911 *adc = iio_priv(indio_dev);
219 	int ret = -EINVAL;
220 
221 	mutex_lock(&adc->lock);
222 	switch (mask) {
223 	case IIO_CHAN_INFO_SCALE:
224 		for (int i = 0; i < MCP3911_NUM_SCALES; i++) {
225 			if (val == mcp3911_scale_table[i][0] &&
226 				val2 == mcp3911_scale_table[i][1]) {
227 
228 				adc->gain[channel->channel] = BIT(i);
229 				ret = mcp3911_update(adc, MCP3911_REG_GAIN,
230 						MCP3911_GAIN_MASK(channel->channel),
231 						MCP3911_GAIN_VAL(channel->channel, i), 1);
232 			}
233 		}
234 		break;
235 	case IIO_CHAN_INFO_OFFSET:
236 		if (val2 != 0) {
237 			ret = -EINVAL;
238 			goto out;
239 		}
240 
241 		/* Write offset */
242 		ret = mcp3911_write(adc, MCP3911_OFFCAL(channel->channel), val,
243 				    3);
244 		if (ret)
245 			goto out;
246 
247 		/* Enable offset*/
248 		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM,
249 				MCP3911_STATUSCOM_EN_OFFCAL,
250 				MCP3911_STATUSCOM_EN_OFFCAL, 2);
251 		break;
252 
253 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
254 		for (int i = 0; i < ARRAY_SIZE(mcp3911_osr_table); i++) {
255 			if (val == mcp3911_osr_table[i]) {
256 				val = FIELD_PREP(MCP3911_CONFIG_OSR, i);
257 				ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR,
258 						val, 2);
259 				break;
260 			}
261 		}
262 		break;
263 	}
264 
265 out:
266 	mutex_unlock(&adc->lock);
267 	return ret;
268 }
269 
270 static int mcp3911_calc_scale_table(struct mcp3911 *adc)
271 {
272 	u32 ref = MCP3911_INT_VREF_MV;
273 	u32 div;
274 	int ret;
275 	u64 tmp;
276 
277 	if (adc->vref) {
278 		ret = regulator_get_voltage(adc->vref);
279 		if (ret < 0) {
280 			dev_err(&adc->spi->dev,
281 				"failed to get vref voltage: %d\n",
282 			       ret);
283 			return ret;
284 		}
285 
286 		ref = ret / 1000;
287 	}
288 
289 	/*
290 	 * For 24-bit Conversion
291 	 * Raw = ((Voltage)/(Vref) * 2^23 * Gain * 1.5
292 	 * Voltage = Raw * (Vref)/(2^23 * Gain * 1.5)
293 	 *
294 	 * ref = Reference voltage
295 	 * div = (2^23 * 1.5 * gain) = 12582912 * gain
296 	 */
297 	for (int i = 0; i < MCP3911_NUM_SCALES; i++) {
298 		div = 12582912 * BIT(i);
299 		tmp = div_s64((s64)ref * 1000000000LL, div);
300 
301 		mcp3911_scale_table[i][0] = 0;
302 		mcp3911_scale_table[i][1] = tmp;
303 	}
304 
305 	return 0;
306 }
307 
308 #define MCP3911_CHAN(idx) {					\
309 		.type = IIO_VOLTAGE,				\
310 		.indexed = 1,					\
311 		.channel = idx,					\
312 		.scan_index = idx,				\
313 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
314 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
315 			BIT(IIO_CHAN_INFO_OFFSET) |		\
316 			BIT(IIO_CHAN_INFO_SCALE),		\
317 		.info_mask_shared_by_type_available =           \
318 			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),	\
319 		.info_mask_separate_available =			\
320 			BIT(IIO_CHAN_INFO_SCALE),		\
321 		.scan_type = {					\
322 			.sign = 's',				\
323 			.realbits = 24,				\
324 			.storagebits = 32,			\
325 			.endianness = IIO_BE,			\
326 		},						\
327 }
328 
329 static const struct iio_chan_spec mcp3911_channels[] = {
330 	MCP3911_CHAN(0),
331 	MCP3911_CHAN(1),
332 	IIO_CHAN_SOFT_TIMESTAMP(2),
333 };
334 
335 static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
336 {
337 	struct iio_poll_func *pf = p;
338 	struct iio_dev *indio_dev = pf->indio_dev;
339 	struct mcp3911 *adc = iio_priv(indio_dev);
340 	struct spi_transfer xfer[] = {
341 		{
342 			.tx_buf = &adc->tx_buf,
343 			.len = 1,
344 		}, {
345 			.rx_buf = adc->rx_buf,
346 			.len = sizeof(adc->rx_buf),
347 		},
348 	};
349 	int scan_index;
350 	int i = 0;
351 	int ret;
352 
353 	mutex_lock(&adc->lock);
354 	adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr);
355 	ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer));
356 	if (ret < 0) {
357 		dev_warn(&adc->spi->dev,
358 				"failed to get conversion data\n");
359 		goto out;
360 	}
361 
362 	for_each_set_bit(scan_index, indio_dev->active_scan_mask, indio_dev->masklength) {
363 		const struct iio_chan_spec *scan_chan = &indio_dev->channels[scan_index];
364 
365 		adc->scan.channels[i] = get_unaligned_be24(&adc->rx_buf[scan_chan->channel * 3]);
366 		i++;
367 	}
368 	iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan,
369 					   iio_get_time_ns(indio_dev));
370 out:
371 	mutex_unlock(&adc->lock);
372 	iio_trigger_notify_done(indio_dev->trig);
373 
374 	return IRQ_HANDLED;
375 }
376 
377 static const struct iio_info mcp3911_info = {
378 	.read_raw = mcp3911_read_raw,
379 	.write_raw = mcp3911_write_raw,
380 	.read_avail = mcp3911_read_avail,
381 	.write_raw_get_fmt = mcp3911_write_raw_get_fmt,
382 };
383 
384 static int mcp3911_config(struct mcp3911 *adc)
385 {
386 	struct device *dev = &adc->spi->dev;
387 	u32 regval;
388 	int ret;
389 
390 	ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
391 
392 	/*
393 	 * Fallback to "device-addr" due to historical mismatch between
394 	 * dt-bindings and implementation
395 	 */
396 	if (ret)
397 		device_property_read_u32(dev, "device-addr", &adc->dev_addr);
398 	if (adc->dev_addr > 3) {
399 		dev_err(&adc->spi->dev,
400 			"invalid device address (%i). Must be in range 0-3.\n",
401 			adc->dev_addr);
402 		return -EINVAL;
403 	}
404 	dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
405 
406 	ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &regval, 2);
407 	if (ret)
408 		return ret;
409 
410 	regval &= ~MCP3911_CONFIG_VREFEXT;
411 	if (adc->vref) {
412 		dev_dbg(&adc->spi->dev, "use external voltage reference\n");
413 		regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 1);
414 	} else {
415 		dev_dbg(&adc->spi->dev,
416 			"use internal voltage reference (1.2V)\n");
417 		regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 0);
418 	}
419 
420 	regval &= ~MCP3911_CONFIG_CLKEXT;
421 	if (adc->clki) {
422 		dev_dbg(&adc->spi->dev, "use external clock as clocksource\n");
423 		regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 1);
424 	} else {
425 		dev_dbg(&adc->spi->dev,
426 			"use crystal oscillator as clocksource\n");
427 		regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 0);
428 	}
429 
430 	ret = mcp3911_write(adc, MCP3911_REG_CONFIG, regval, 2);
431 	if (ret)
432 		return ret;
433 
434 	ret = mcp3911_read(adc, MCP3911_REG_STATUSCOM, &regval, 2);
435 	if (ret)
436 		return ret;
437 
438 	/* Address counter incremented, cycle through register types */
439 	regval &= ~MCP3911_STATUSCOM_READ;
440 	regval |= FIELD_PREP(MCP3911_STATUSCOM_READ, 0x02);
441 
442 	return  mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2);
443 }
444 
445 static void mcp3911_cleanup_regulator(void *vref)
446 {
447 	regulator_disable(vref);
448 }
449 
450 static int mcp3911_set_trigger_state(struct iio_trigger *trig, bool enable)
451 {
452 	struct mcp3911 *adc = iio_trigger_get_drvdata(trig);
453 
454 	if (enable)
455 		enable_irq(adc->spi->irq);
456 	else
457 		disable_irq(adc->spi->irq);
458 
459 	return 0;
460 }
461 
462 static const struct iio_trigger_ops mcp3911_trigger_ops = {
463 	.validate_device = iio_trigger_validate_own_device,
464 	.set_trigger_state = mcp3911_set_trigger_state,
465 };
466 
467 static int mcp3911_probe(struct spi_device *spi)
468 {
469 	struct iio_dev *indio_dev;
470 	struct mcp3911 *adc;
471 	int ret;
472 
473 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
474 	if (!indio_dev)
475 		return -ENOMEM;
476 
477 	adc = iio_priv(indio_dev);
478 	adc->spi = spi;
479 
480 	adc->vref = devm_regulator_get_optional(&adc->spi->dev, "vref");
481 	if (IS_ERR(adc->vref)) {
482 		if (PTR_ERR(adc->vref) == -ENODEV) {
483 			adc->vref = NULL;
484 		} else {
485 			dev_err(&adc->spi->dev,
486 				"failed to get regulator (%ld)\n",
487 				PTR_ERR(adc->vref));
488 			return PTR_ERR(adc->vref);
489 		}
490 
491 	} else {
492 		ret = regulator_enable(adc->vref);
493 		if (ret)
494 			return ret;
495 
496 		ret = devm_add_action_or_reset(&spi->dev,
497 				mcp3911_cleanup_regulator, adc->vref);
498 		if (ret)
499 			return ret;
500 	}
501 
502 	adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL);
503 	if (IS_ERR(adc->clki)) {
504 		if (PTR_ERR(adc->clki) == -ENOENT) {
505 			adc->clki = NULL;
506 		} else {
507 			dev_err(&adc->spi->dev,
508 				"failed to get adc clk (%ld)\n",
509 				PTR_ERR(adc->clki));
510 			return PTR_ERR(adc->clki);
511 		}
512 	}
513 
514 	ret = mcp3911_config(adc);
515 	if (ret)
516 		return ret;
517 
518 	if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz"))
519 		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
520 				0, 2);
521 	else
522 		ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
523 				MCP3911_STATUSCOM_DRHIZ, 2);
524 	if (ret)
525 		return ret;
526 
527 	ret = mcp3911_calc_scale_table(adc);
528 	if (ret)
529 		return ret;
530 
531        /* Set gain to 1 for all channels */
532 	for (int i = 0; i < MCP3911_NUM_CHANNELS; i++) {
533 		adc->gain[i] = 1;
534 		ret = mcp3911_update(adc, MCP3911_REG_GAIN,
535 				MCP3911_GAIN_MASK(i),
536 				MCP3911_GAIN_VAL(i, 0), 1);
537 		if (ret)
538 			return ret;
539 	}
540 
541 	indio_dev->name = spi_get_device_id(spi)->name;
542 	indio_dev->modes = INDIO_DIRECT_MODE;
543 	indio_dev->info = &mcp3911_info;
544 	spi_set_drvdata(spi, indio_dev);
545 
546 	indio_dev->channels = mcp3911_channels;
547 	indio_dev->num_channels = ARRAY_SIZE(mcp3911_channels);
548 
549 	mutex_init(&adc->lock);
550 
551 	if (spi->irq > 0) {
552 		adc->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
553 				indio_dev->name,
554 				iio_device_id(indio_dev));
555 		if (!adc->trig)
556 			return -ENOMEM;
557 
558 		adc->trig->ops = &mcp3911_trigger_ops;
559 		iio_trigger_set_drvdata(adc->trig, adc);
560 		ret = devm_iio_trigger_register(&spi->dev, adc->trig);
561 		if (ret)
562 			return ret;
563 
564 		/*
565 		 * The device generates interrupts as long as it is powered up.
566 		 * Some platforms might not allow the option to power it down so
567 		 * don't enable the interrupt to avoid extra load on the system.
568 		 */
569 		ret = devm_request_irq(&spi->dev, spi->irq,
570 				&iio_trigger_generic_data_rdy_poll, IRQF_NO_AUTOEN | IRQF_ONESHOT,
571 				indio_dev->name, adc->trig);
572 		if (ret)
573 			return ret;
574 	}
575 
576 	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
577 			NULL,
578 			mcp3911_trigger_handler, NULL);
579 	if (ret)
580 		return ret;
581 
582 	return devm_iio_device_register(&adc->spi->dev, indio_dev);
583 }
584 
585 static const struct of_device_id mcp3911_dt_ids[] = {
586 	{ .compatible = "microchip,mcp3911" },
587 	{ }
588 };
589 MODULE_DEVICE_TABLE(of, mcp3911_dt_ids);
590 
591 static const struct spi_device_id mcp3911_id[] = {
592 	{ "mcp3911", 0 },
593 	{ }
594 };
595 MODULE_DEVICE_TABLE(spi, mcp3911_id);
596 
597 static struct spi_driver mcp3911_driver = {
598 	.driver = {
599 		.name = "mcp3911",
600 		.of_match_table = mcp3911_dt_ids,
601 	},
602 	.probe = mcp3911_probe,
603 	.id_table = mcp3911_id,
604 };
605 module_spi_driver(mcp3911_driver);
606 
607 MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@gmail.com>");
608 MODULE_AUTHOR("Kent Gustavsson <kent@minoris.se>");
609 MODULE_DESCRIPTION("Microchip Technology MCP3911");
610 MODULE_LICENSE("GPL v2");
611