xref: /openbmc/linux/drivers/iio/adc/imx93_adc.c (revision c4c3c32d)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * NXP i.MX93 ADC driver
4  *
5  * Copyright 2023 NXP
6  */
7 
8 #include <linux/bitfield.h>
9 #include <linux/clk.h>
10 #include <linux/completion.h>
11 #include <linux/err.h>
12 #include <linux/iio/iio.h>
13 #include <linux/interrupt.h>
14 #include <linux/io.h>
15 #include <linux/iopoll.h>
16 #include <linux/mod_devicetable.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/regulator/consumer.h>
21 
22 #define IMX93_ADC_DRIVER_NAME	"imx93-adc"
23 
24 /* Register map definition */
25 #define IMX93_ADC_MCR		0x00
26 #define IMX93_ADC_MSR		0x04
27 #define IMX93_ADC_ISR		0x10
28 #define IMX93_ADC_IMR		0x20
29 #define IMX93_ADC_CIMR0		0x24
30 #define IMX93_ADC_CTR0		0x94
31 #define IMX93_ADC_NCMR0		0xA4
32 #define IMX93_ADC_PCDR0		0x100
33 #define IMX93_ADC_PCDR1		0x104
34 #define IMX93_ADC_PCDR2		0x108
35 #define IMX93_ADC_PCDR3		0x10c
36 #define IMX93_ADC_PCDR4		0x110
37 #define IMX93_ADC_PCDR5		0x114
38 #define IMX93_ADC_PCDR6		0x118
39 #define IMX93_ADC_PCDR7		0x11c
40 #define IMX93_ADC_CALSTAT	0x39C
41 
42 /* ADC bit shift */
43 #define IMX93_ADC_MCR_MODE_MASK			BIT(29)
44 #define IMX93_ADC_MCR_NSTART_MASK		BIT(24)
45 #define IMX93_ADC_MCR_CALSTART_MASK		BIT(14)
46 #define IMX93_ADC_MCR_ADCLKSE_MASK		BIT(8)
47 #define IMX93_ADC_MCR_PWDN_MASK			BIT(0)
48 #define IMX93_ADC_MSR_CALFAIL_MASK		BIT(30)
49 #define IMX93_ADC_MSR_CALBUSY_MASK		BIT(29)
50 #define IMX93_ADC_MSR_ADCSTATUS_MASK		GENMASK(2, 0)
51 #define IMX93_ADC_ISR_ECH_MASK			BIT(0)
52 #define IMX93_ADC_ISR_EOC_MASK			BIT(1)
53 #define IMX93_ADC_ISR_EOC_ECH_MASK		(IMX93_ADC_ISR_EOC_MASK | \
54 						 IMX93_ADC_ISR_ECH_MASK)
55 #define IMX93_ADC_IMR_JEOC_MASK			BIT(3)
56 #define IMX93_ADC_IMR_JECH_MASK			BIT(2)
57 #define IMX93_ADC_IMR_EOC_MASK			BIT(1)
58 #define IMX93_ADC_IMR_ECH_MASK			BIT(0)
59 #define IMX93_ADC_PCDR_CDATA_MASK		GENMASK(11, 0)
60 
61 /* ADC status */
62 #define IMX93_ADC_MSR_ADCSTATUS_IDLE			0
63 #define IMX93_ADC_MSR_ADCSTATUS_POWER_DOWN		1
64 #define IMX93_ADC_MSR_ADCSTATUS_WAIT_STATE		2
65 #define IMX93_ADC_MSR_ADCSTATUS_BUSY_IN_CALIBRATION	3
66 #define IMX93_ADC_MSR_ADCSTATUS_SAMPLE			4
67 #define IMX93_ADC_MSR_ADCSTATUS_CONVERSION		6
68 
69 #define IMX93_ADC_TIMEOUT		msecs_to_jiffies(100)
70 
71 struct imx93_adc {
72 	struct device *dev;
73 	void __iomem *regs;
74 	struct clk *ipg_clk;
75 	int irq;
76 	struct regulator *vref;
77 	/* lock to protect against multiple access to the device */
78 	struct mutex lock;
79 	struct completion completion;
80 };
81 
82 #define IMX93_ADC_CHAN(_idx) {					\
83 	.type = IIO_VOLTAGE,					\
84 	.indexed = 1,						\
85 	.channel = (_idx),					\
86 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
87 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
88 				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
89 }
90 
91 static const struct iio_chan_spec imx93_adc_iio_channels[] = {
92 	IMX93_ADC_CHAN(0),
93 	IMX93_ADC_CHAN(1),
94 	IMX93_ADC_CHAN(2),
95 	IMX93_ADC_CHAN(3),
96 };
97 
98 static void imx93_adc_power_down(struct imx93_adc *adc)
99 {
100 	u32 mcr, msr;
101 	int ret;
102 
103 	mcr = readl(adc->regs + IMX93_ADC_MCR);
104 	mcr |= FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1);
105 	writel(mcr, adc->regs + IMX93_ADC_MCR);
106 
107 	ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr,
108 				 ((msr & IMX93_ADC_MSR_ADCSTATUS_MASK) ==
109 				  IMX93_ADC_MSR_ADCSTATUS_POWER_DOWN),
110 				 1, 50);
111 	if (ret == -ETIMEDOUT)
112 		dev_warn(adc->dev,
113 			 "ADC do not in power down mode, current MSR is %x\n",
114 			 msr);
115 }
116 
117 static void imx93_adc_power_up(struct imx93_adc *adc)
118 {
119 	u32 mcr;
120 
121 	/* bring ADC out of power down state, in idle state */
122 	mcr = readl(adc->regs + IMX93_ADC_MCR);
123 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1);
124 	writel(mcr, adc->regs + IMX93_ADC_MCR);
125 }
126 
127 static void imx93_adc_config_ad_clk(struct imx93_adc *adc)
128 {
129 	u32 mcr;
130 
131 	/* put adc in power down mode */
132 	imx93_adc_power_down(adc);
133 
134 	/* config the AD_CLK equal to bus clock */
135 	mcr = readl(adc->regs + IMX93_ADC_MCR);
136 	mcr |= FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1);
137 	writel(mcr, adc->regs + IMX93_ADC_MCR);
138 
139 	imx93_adc_power_up(adc);
140 }
141 
142 static int imx93_adc_calibration(struct imx93_adc *adc)
143 {
144 	u32 mcr, msr;
145 	int ret;
146 
147 	/* make sure ADC in power down mode */
148 	imx93_adc_power_down(adc);
149 
150 	/* config SAR controller operating clock */
151 	mcr = readl(adc->regs + IMX93_ADC_MCR);
152 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1);
153 	writel(mcr, adc->regs + IMX93_ADC_MCR);
154 
155 	imx93_adc_power_up(adc);
156 
157 	/*
158 	 * TODO: we use the default TSAMP/NRSMPL/AVGEN in MCR,
159 	 * can add the setting of these bit if need in future.
160 	 */
161 
162 	/* run calibration */
163 	mcr = readl(adc->regs + IMX93_ADC_MCR);
164 	mcr |= FIELD_PREP(IMX93_ADC_MCR_CALSTART_MASK, 1);
165 	writel(mcr, adc->regs + IMX93_ADC_MCR);
166 
167 	/* wait calibration to be finished */
168 	ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr,
169 		!(msr & IMX93_ADC_MSR_CALBUSY_MASK), 1000, 2000000);
170 	if (ret == -ETIMEDOUT) {
171 		dev_warn(adc->dev, "ADC do not finish calibration in 2 min!\n");
172 		imx93_adc_power_down(adc);
173 		return ret;
174 	}
175 
176 	/* check whether calbration is success or not */
177 	msr = readl(adc->regs + IMX93_ADC_MSR);
178 	if (msr & IMX93_ADC_MSR_CALFAIL_MASK) {
179 		dev_warn(adc->dev, "ADC calibration failed!\n");
180 		imx93_adc_power_down(adc);
181 		return -EAGAIN;
182 	}
183 
184 	return 0;
185 }
186 
187 static int imx93_adc_read_channel_conversion(struct imx93_adc *adc,
188 						int channel_number,
189 						int *result)
190 {
191 	u32 channel;
192 	u32 imr, mcr, pcda;
193 	long ret;
194 
195 	reinit_completion(&adc->completion);
196 
197 	/* config channel mask register */
198 	channel = 1 << channel_number;
199 	writel(channel, adc->regs + IMX93_ADC_NCMR0);
200 
201 	/* TODO: can config desired sample time in CTRn if need */
202 
203 	/* config interrupt mask */
204 	imr = FIELD_PREP(IMX93_ADC_IMR_EOC_MASK, 1);
205 	writel(imr, adc->regs + IMX93_ADC_IMR);
206 	writel(channel, adc->regs + IMX93_ADC_CIMR0);
207 
208 	/* config one-shot mode */
209 	mcr = readl(adc->regs + IMX93_ADC_MCR);
210 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_MODE_MASK, 1);
211 	writel(mcr, adc->regs + IMX93_ADC_MCR);
212 
213 	/* start normal conversion */
214 	mcr = readl(adc->regs + IMX93_ADC_MCR);
215 	mcr |= FIELD_PREP(IMX93_ADC_MCR_NSTART_MASK, 1);
216 	writel(mcr, adc->regs + IMX93_ADC_MCR);
217 
218 	ret = wait_for_completion_interruptible_timeout(&adc->completion,
219 							IMX93_ADC_TIMEOUT);
220 	if (ret == 0)
221 		return -ETIMEDOUT;
222 
223 	if (ret < 0)
224 		return ret;
225 
226 	pcda = readl(adc->regs + IMX93_ADC_PCDR0 + channel_number * 4);
227 
228 	*result = FIELD_GET(IMX93_ADC_PCDR_CDATA_MASK, pcda);
229 
230 	return ret;
231 }
232 
233 static int imx93_adc_read_raw(struct iio_dev *indio_dev,
234 				struct iio_chan_spec const *chan,
235 				int *val, int *val2, long mask)
236 {
237 	struct imx93_adc *adc = iio_priv(indio_dev);
238 	struct device *dev = adc->dev;
239 	int ret;
240 
241 	switch (mask) {
242 	case IIO_CHAN_INFO_RAW:
243 		pm_runtime_get_sync(dev);
244 		mutex_lock(&adc->lock);
245 		ret = imx93_adc_read_channel_conversion(adc, chan->channel, val);
246 		mutex_unlock(&adc->lock);
247 		pm_runtime_mark_last_busy(dev);
248 		pm_runtime_put_sync_autosuspend(dev);
249 		if (ret < 0)
250 			return ret;
251 
252 		return IIO_VAL_INT;
253 
254 	case IIO_CHAN_INFO_SCALE:
255 		ret = regulator_get_voltage(adc->vref);
256 		if (ret < 0)
257 			return ret;
258 		*val = ret / 1000;
259 		*val2 = 12;
260 		return IIO_VAL_FRACTIONAL_LOG2;
261 
262 	case IIO_CHAN_INFO_SAMP_FREQ:
263 		*val = clk_get_rate(adc->ipg_clk);
264 		return IIO_VAL_INT;
265 
266 	default:
267 		return -EINVAL;
268 	}
269 }
270 
271 static irqreturn_t imx93_adc_isr(int irq, void *dev_id)
272 {
273 	struct imx93_adc *adc = dev_id;
274 	u32 isr, eoc, unexpected;
275 
276 	isr = readl(adc->regs + IMX93_ADC_ISR);
277 
278 	if (FIELD_GET(IMX93_ADC_ISR_EOC_ECH_MASK, isr)) {
279 		eoc = isr & IMX93_ADC_ISR_EOC_ECH_MASK;
280 		writel(eoc, adc->regs + IMX93_ADC_ISR);
281 		complete(&adc->completion);
282 	}
283 
284 	unexpected = isr & ~IMX93_ADC_ISR_EOC_ECH_MASK;
285 	if (unexpected) {
286 		writel(unexpected, adc->regs + IMX93_ADC_ISR);
287 		dev_err(adc->dev, "Unexpected interrupt 0x%08x.\n", unexpected);
288 		return IRQ_NONE;
289 	}
290 
291 	return IRQ_HANDLED;
292 }
293 
294 static const struct iio_info imx93_adc_iio_info = {
295 	.read_raw = &imx93_adc_read_raw,
296 };
297 
298 static int imx93_adc_probe(struct platform_device *pdev)
299 {
300 	struct imx93_adc *adc;
301 	struct iio_dev *indio_dev;
302 	struct device *dev = &pdev->dev;
303 	int ret;
304 
305 	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
306 	if (!indio_dev)
307 		return dev_err_probe(dev, -ENOMEM,
308 				     "Failed allocating iio device\n");
309 
310 	adc = iio_priv(indio_dev);
311 	adc->dev = dev;
312 
313 	mutex_init(&adc->lock);
314 	adc->regs = devm_platform_ioremap_resource(pdev, 0);
315 	if (IS_ERR(adc->regs))
316 		return dev_err_probe(dev, PTR_ERR(adc->regs),
317 				     "Failed getting ioremap resource\n");
318 
319 	/* The third irq is for ADC conversion usage */
320 	adc->irq = platform_get_irq(pdev, 2);
321 	if (adc->irq < 0)
322 		return adc->irq;
323 
324 	adc->ipg_clk = devm_clk_get(dev, "ipg");
325 	if (IS_ERR(adc->ipg_clk))
326 		return dev_err_probe(dev, PTR_ERR(adc->ipg_clk),
327 				     "Failed getting clock.\n");
328 
329 	adc->vref = devm_regulator_get(dev, "vref");
330 	if (IS_ERR(adc->vref))
331 		return dev_err_probe(dev, PTR_ERR(adc->vref),
332 				     "Failed getting reference voltage.\n");
333 
334 	ret = regulator_enable(adc->vref);
335 	if (ret)
336 		return dev_err_probe(dev, ret,
337 				     "Failed to enable reference voltage.\n");
338 
339 	platform_set_drvdata(pdev, indio_dev);
340 
341 	init_completion(&adc->completion);
342 
343 	indio_dev->name = "imx93-adc";
344 	indio_dev->info = &imx93_adc_iio_info;
345 	indio_dev->modes = INDIO_DIRECT_MODE;
346 	indio_dev->channels = imx93_adc_iio_channels;
347 	indio_dev->num_channels = ARRAY_SIZE(imx93_adc_iio_channels);
348 
349 	ret = clk_prepare_enable(adc->ipg_clk);
350 	if (ret) {
351 		dev_err_probe(dev, ret,
352 			      "Failed to enable ipg clock.\n");
353 		goto error_regulator_disable;
354 	}
355 
356 	ret = request_irq(adc->irq, imx93_adc_isr, 0, IMX93_ADC_DRIVER_NAME, adc);
357 	if (ret < 0) {
358 		dev_err_probe(dev, ret,
359 			      "Failed requesting irq, irq = %d\n", adc->irq);
360 		goto error_ipg_clk_disable;
361 	}
362 
363 	ret = imx93_adc_calibration(adc);
364 	if (ret < 0)
365 		goto error_free_adc_irq;
366 
367 	imx93_adc_config_ad_clk(adc);
368 
369 	ret = iio_device_register(indio_dev);
370 	if (ret) {
371 		dev_err_probe(dev, ret,
372 			      "Failed to register this iio device.\n");
373 		goto error_adc_power_down;
374 	}
375 
376 	pm_runtime_set_active(dev);
377 	pm_runtime_set_autosuspend_delay(dev, 50);
378 	pm_runtime_use_autosuspend(dev);
379 	pm_runtime_enable(dev);
380 
381 	return 0;
382 
383 error_adc_power_down:
384 	imx93_adc_power_down(adc);
385 error_free_adc_irq:
386 	free_irq(adc->irq, adc);
387 error_ipg_clk_disable:
388 	clk_disable_unprepare(adc->ipg_clk);
389 error_regulator_disable:
390 	regulator_disable(adc->vref);
391 
392 	return ret;
393 }
394 
395 static int imx93_adc_remove(struct platform_device *pdev)
396 {
397 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
398 	struct imx93_adc *adc = iio_priv(indio_dev);
399 	struct device *dev = adc->dev;
400 
401 	/* adc power down need clock on */
402 	pm_runtime_get_sync(dev);
403 
404 	pm_runtime_disable(dev);
405 	pm_runtime_dont_use_autosuspend(dev);
406 	pm_runtime_put_noidle(dev);
407 
408 	iio_device_unregister(indio_dev);
409 	imx93_adc_power_down(adc);
410 	free_irq(adc->irq, adc);
411 	clk_disable_unprepare(adc->ipg_clk);
412 	regulator_disable(adc->vref);
413 
414 	return 0;
415 }
416 
417 static int imx93_adc_runtime_suspend(struct device *dev)
418 {
419 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
420 	struct imx93_adc *adc = iio_priv(indio_dev);
421 
422 	imx93_adc_power_down(adc);
423 	clk_disable_unprepare(adc->ipg_clk);
424 	regulator_disable(adc->vref);
425 
426 	return 0;
427 }
428 
429 static int imx93_adc_runtime_resume(struct device *dev)
430 {
431 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
432 	struct imx93_adc *adc = iio_priv(indio_dev);
433 	int ret;
434 
435 	ret = regulator_enable(adc->vref);
436 	if (ret) {
437 		dev_err(dev,
438 			"Can't enable adc reference top voltage, err = %d\n",
439 			ret);
440 		return ret;
441 	}
442 
443 	ret = clk_prepare_enable(adc->ipg_clk);
444 	if (ret) {
445 		dev_err(dev, "Could not prepare or enable clock.\n");
446 		goto err_disable_reg;
447 	}
448 
449 	imx93_adc_power_up(adc);
450 
451 	return 0;
452 
453 err_disable_reg:
454 	regulator_disable(adc->vref);
455 
456 	return ret;
457 }
458 
459 static DEFINE_RUNTIME_DEV_PM_OPS(imx93_adc_pm_ops,
460 				 imx93_adc_runtime_suspend,
461 				 imx93_adc_runtime_resume, NULL);
462 
463 static const struct of_device_id imx93_adc_match[] = {
464 	{ .compatible = "nxp,imx93-adc", },
465 	{ /* sentinel */ }
466 };
467 MODULE_DEVICE_TABLE(of, imx93_adc_match);
468 
469 static struct platform_driver imx93_adc_driver = {
470 	.probe		= imx93_adc_probe,
471 	.remove		= imx93_adc_remove,
472 	.driver		= {
473 		.name	= IMX93_ADC_DRIVER_NAME,
474 		.of_match_table = imx93_adc_match,
475 		.pm	= pm_ptr(&imx93_adc_pm_ops),
476 	},
477 };
478 
479 module_platform_driver(imx93_adc_driver);
480 
481 MODULE_DESCRIPTION("NXP i.MX93 ADC driver");
482 MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>");
483 MODULE_LICENSE("GPL");
484