xref: /openbmc/linux/drivers/iio/adc/imx93_adc.c (revision 8d81cd1a)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * NXP i.MX93 ADC driver
4  *
5  * Copyright 2023 NXP
6  */
7 
8 #include <linux/bitfield.h>
9 #include <linux/clk.h>
10 #include <linux/completion.h>
11 #include <linux/err.h>
12 #include <linux/iio/iio.h>
13 #include <linux/interrupt.h>
14 #include <linux/io.h>
15 #include <linux/iopoll.h>
16 #include <linux/mod_devicetable.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/regulator/consumer.h>
21 
22 #define IMX93_ADC_DRIVER_NAME	"imx93-adc"
23 
24 /* Register map definition */
25 #define IMX93_ADC_MCR		0x00
26 #define IMX93_ADC_MSR		0x04
27 #define IMX93_ADC_ISR		0x10
28 #define IMX93_ADC_IMR		0x20
29 #define IMX93_ADC_CIMR0		0x24
30 #define IMX93_ADC_CTR0		0x94
31 #define IMX93_ADC_NCMR0		0xA4
32 #define IMX93_ADC_PCDR0		0x100
33 #define IMX93_ADC_PCDR1		0x104
34 #define IMX93_ADC_PCDR2		0x108
35 #define IMX93_ADC_PCDR3		0x10c
36 #define IMX93_ADC_PCDR4		0x110
37 #define IMX93_ADC_PCDR5		0x114
38 #define IMX93_ADC_PCDR6		0x118
39 #define IMX93_ADC_PCDR7		0x11c
40 #define IMX93_ADC_CALSTAT	0x39C
41 
42 /* ADC bit shift */
43 #define IMX93_ADC_MCR_MODE_MASK			BIT(29)
44 #define IMX93_ADC_MCR_NSTART_MASK		BIT(24)
45 #define IMX93_ADC_MCR_CALSTART_MASK		BIT(14)
46 #define IMX93_ADC_MCR_ADCLKSE_MASK		BIT(8)
47 #define IMX93_ADC_MCR_PWDN_MASK			BIT(0)
48 #define IMX93_ADC_MSR_CALFAIL_MASK		BIT(30)
49 #define IMX93_ADC_MSR_CALBUSY_MASK		BIT(29)
50 #define IMX93_ADC_MSR_ADCSTATUS_MASK		GENMASK(2, 0)
51 #define IMX93_ADC_ISR_ECH_MASK			BIT(0)
52 #define IMX93_ADC_ISR_EOC_MASK			BIT(1)
53 #define IMX93_ADC_ISR_EOC_ECH_MASK		(IMX93_ADC_ISR_EOC_MASK | \
54 						 IMX93_ADC_ISR_ECH_MASK)
55 #define IMX93_ADC_IMR_JEOC_MASK			BIT(3)
56 #define IMX93_ADC_IMR_JECH_MASK			BIT(2)
57 #define IMX93_ADC_IMR_EOC_MASK			BIT(1)
58 #define IMX93_ADC_IMR_ECH_MASK			BIT(0)
59 #define IMX93_ADC_PCDR_CDATA_MASK		GENMASK(11, 0)
60 
61 /* ADC status */
62 #define IMX93_ADC_MSR_ADCSTATUS_IDLE			0
63 #define IMX93_ADC_MSR_ADCSTATUS_POWER_DOWN		1
64 #define IMX93_ADC_MSR_ADCSTATUS_WAIT_STATE		2
65 #define IMX93_ADC_MSR_ADCSTATUS_BUSY_IN_CALIBRATION	3
66 #define IMX93_ADC_MSR_ADCSTATUS_SAMPLE			4
67 #define IMX93_ADC_MSR_ADCSTATUS_CONVERSION		6
68 
69 #define IMX93_ADC_TIMEOUT		msecs_to_jiffies(100)
70 
71 struct imx93_adc {
72 	struct device *dev;
73 	void __iomem *regs;
74 	struct clk *ipg_clk;
75 	int irq;
76 	struct regulator *vref;
77 	/* lock to protect against multiple access to the device */
78 	struct mutex lock;
79 	struct completion completion;
80 };
81 
82 #define IMX93_ADC_CHAN(_idx) {					\
83 	.type = IIO_VOLTAGE,					\
84 	.indexed = 1,						\
85 	.channel = (_idx),					\
86 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
87 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
88 				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
89 }
90 
91 static const struct iio_chan_spec imx93_adc_iio_channels[] = {
92 	IMX93_ADC_CHAN(0),
93 	IMX93_ADC_CHAN(1),
94 	IMX93_ADC_CHAN(2),
95 	IMX93_ADC_CHAN(3),
96 	IMX93_ADC_CHAN(4),
97 	IMX93_ADC_CHAN(5),
98 	IMX93_ADC_CHAN(6),
99 	IMX93_ADC_CHAN(7),
100 };
101 
102 static void imx93_adc_power_down(struct imx93_adc *adc)
103 {
104 	u32 mcr, msr;
105 	int ret;
106 
107 	mcr = readl(adc->regs + IMX93_ADC_MCR);
108 	mcr |= FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1);
109 	writel(mcr, adc->regs + IMX93_ADC_MCR);
110 
111 	ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr,
112 				 ((msr & IMX93_ADC_MSR_ADCSTATUS_MASK) ==
113 				  IMX93_ADC_MSR_ADCSTATUS_POWER_DOWN),
114 				 1, 50);
115 	if (ret == -ETIMEDOUT)
116 		dev_warn(adc->dev,
117 			 "ADC do not in power down mode, current MSR is %x\n",
118 			 msr);
119 }
120 
121 static void imx93_adc_power_up(struct imx93_adc *adc)
122 {
123 	u32 mcr;
124 
125 	/* bring ADC out of power down state, in idle state */
126 	mcr = readl(adc->regs + IMX93_ADC_MCR);
127 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1);
128 	writel(mcr, adc->regs + IMX93_ADC_MCR);
129 }
130 
131 static void imx93_adc_config_ad_clk(struct imx93_adc *adc)
132 {
133 	u32 mcr;
134 
135 	/* put adc in power down mode */
136 	imx93_adc_power_down(adc);
137 
138 	/* config the AD_CLK equal to bus clock */
139 	mcr = readl(adc->regs + IMX93_ADC_MCR);
140 	mcr |= FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1);
141 	writel(mcr, adc->regs + IMX93_ADC_MCR);
142 
143 	imx93_adc_power_up(adc);
144 }
145 
146 static int imx93_adc_calibration(struct imx93_adc *adc)
147 {
148 	u32 mcr, msr;
149 	int ret;
150 
151 	/* make sure ADC in power down mode */
152 	imx93_adc_power_down(adc);
153 
154 	/* config SAR controller operating clock */
155 	mcr = readl(adc->regs + IMX93_ADC_MCR);
156 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1);
157 	writel(mcr, adc->regs + IMX93_ADC_MCR);
158 
159 	imx93_adc_power_up(adc);
160 
161 	/*
162 	 * TODO: we use the default TSAMP/NRSMPL/AVGEN in MCR,
163 	 * can add the setting of these bit if need in future.
164 	 */
165 
166 	/* run calibration */
167 	mcr = readl(adc->regs + IMX93_ADC_MCR);
168 	mcr |= FIELD_PREP(IMX93_ADC_MCR_CALSTART_MASK, 1);
169 	writel(mcr, adc->regs + IMX93_ADC_MCR);
170 
171 	/* wait calibration to be finished */
172 	ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr,
173 		!(msr & IMX93_ADC_MSR_CALBUSY_MASK), 1000, 2000000);
174 	if (ret == -ETIMEDOUT) {
175 		dev_warn(adc->dev, "ADC do not finish calibration in 2 min!\n");
176 		imx93_adc_power_down(adc);
177 		return ret;
178 	}
179 
180 	/* check whether calbration is success or not */
181 	msr = readl(adc->regs + IMX93_ADC_MSR);
182 	if (msr & IMX93_ADC_MSR_CALFAIL_MASK) {
183 		dev_warn(adc->dev, "ADC calibration failed!\n");
184 		imx93_adc_power_down(adc);
185 		return -EAGAIN;
186 	}
187 
188 	return 0;
189 }
190 
191 static int imx93_adc_read_channel_conversion(struct imx93_adc *adc,
192 						int channel_number,
193 						int *result)
194 {
195 	u32 channel;
196 	u32 imr, mcr, pcda;
197 	long ret;
198 
199 	reinit_completion(&adc->completion);
200 
201 	/* config channel mask register */
202 	channel = 1 << channel_number;
203 	writel(channel, adc->regs + IMX93_ADC_NCMR0);
204 
205 	/* TODO: can config desired sample time in CTRn if need */
206 
207 	/* config interrupt mask */
208 	imr = FIELD_PREP(IMX93_ADC_IMR_EOC_MASK, 1);
209 	writel(imr, adc->regs + IMX93_ADC_IMR);
210 	writel(channel, adc->regs + IMX93_ADC_CIMR0);
211 
212 	/* config one-shot mode */
213 	mcr = readl(adc->regs + IMX93_ADC_MCR);
214 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_MODE_MASK, 1);
215 	writel(mcr, adc->regs + IMX93_ADC_MCR);
216 
217 	/* start normal conversion */
218 	mcr = readl(adc->regs + IMX93_ADC_MCR);
219 	mcr |= FIELD_PREP(IMX93_ADC_MCR_NSTART_MASK, 1);
220 	writel(mcr, adc->regs + IMX93_ADC_MCR);
221 
222 	ret = wait_for_completion_interruptible_timeout(&adc->completion,
223 							IMX93_ADC_TIMEOUT);
224 	if (ret == 0)
225 		return -ETIMEDOUT;
226 
227 	if (ret < 0)
228 		return ret;
229 
230 	pcda = readl(adc->regs + IMX93_ADC_PCDR0 + channel_number * 4);
231 
232 	*result = FIELD_GET(IMX93_ADC_PCDR_CDATA_MASK, pcda);
233 
234 	return ret;
235 }
236 
237 static int imx93_adc_read_raw(struct iio_dev *indio_dev,
238 				struct iio_chan_spec const *chan,
239 				int *val, int *val2, long mask)
240 {
241 	struct imx93_adc *adc = iio_priv(indio_dev);
242 	struct device *dev = adc->dev;
243 	int ret;
244 
245 	switch (mask) {
246 	case IIO_CHAN_INFO_RAW:
247 		pm_runtime_get_sync(dev);
248 		mutex_lock(&adc->lock);
249 		ret = imx93_adc_read_channel_conversion(adc, chan->channel, val);
250 		mutex_unlock(&adc->lock);
251 		pm_runtime_mark_last_busy(dev);
252 		pm_runtime_put_sync_autosuspend(dev);
253 		if (ret < 0)
254 			return ret;
255 
256 		return IIO_VAL_INT;
257 
258 	case IIO_CHAN_INFO_SCALE:
259 		ret = regulator_get_voltage(adc->vref);
260 		if (ret < 0)
261 			return ret;
262 		*val = ret / 1000;
263 		*val2 = 12;
264 		return IIO_VAL_FRACTIONAL_LOG2;
265 
266 	case IIO_CHAN_INFO_SAMP_FREQ:
267 		*val = clk_get_rate(adc->ipg_clk);
268 		return IIO_VAL_INT;
269 
270 	default:
271 		return -EINVAL;
272 	}
273 }
274 
275 static irqreturn_t imx93_adc_isr(int irq, void *dev_id)
276 {
277 	struct imx93_adc *adc = dev_id;
278 	u32 isr, eoc, unexpected;
279 
280 	isr = readl(adc->regs + IMX93_ADC_ISR);
281 
282 	if (FIELD_GET(IMX93_ADC_ISR_EOC_ECH_MASK, isr)) {
283 		eoc = isr & IMX93_ADC_ISR_EOC_ECH_MASK;
284 		writel(eoc, adc->regs + IMX93_ADC_ISR);
285 		complete(&adc->completion);
286 	}
287 
288 	unexpected = isr & ~IMX93_ADC_ISR_EOC_ECH_MASK;
289 	if (unexpected) {
290 		writel(unexpected, adc->regs + IMX93_ADC_ISR);
291 		dev_err(adc->dev, "Unexpected interrupt 0x%08x.\n", unexpected);
292 		return IRQ_NONE;
293 	}
294 
295 	return IRQ_HANDLED;
296 }
297 
298 static const struct iio_info imx93_adc_iio_info = {
299 	.read_raw = &imx93_adc_read_raw,
300 };
301 
302 static int imx93_adc_probe(struct platform_device *pdev)
303 {
304 	struct imx93_adc *adc;
305 	struct iio_dev *indio_dev;
306 	struct device *dev = &pdev->dev;
307 	int ret;
308 
309 	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
310 	if (!indio_dev)
311 		return dev_err_probe(dev, -ENOMEM,
312 				     "Failed allocating iio device\n");
313 
314 	adc = iio_priv(indio_dev);
315 	adc->dev = dev;
316 
317 	mutex_init(&adc->lock);
318 	adc->regs = devm_platform_ioremap_resource(pdev, 0);
319 	if (IS_ERR(adc->regs))
320 		return dev_err_probe(dev, PTR_ERR(adc->regs),
321 				     "Failed getting ioremap resource\n");
322 
323 	/* The third irq is for ADC conversion usage */
324 	adc->irq = platform_get_irq(pdev, 2);
325 	if (adc->irq < 0)
326 		return adc->irq;
327 
328 	adc->ipg_clk = devm_clk_get(dev, "ipg");
329 	if (IS_ERR(adc->ipg_clk))
330 		return dev_err_probe(dev, PTR_ERR(adc->ipg_clk),
331 				     "Failed getting clock.\n");
332 
333 	adc->vref = devm_regulator_get(dev, "vref");
334 	if (IS_ERR(adc->vref))
335 		return dev_err_probe(dev, PTR_ERR(adc->vref),
336 				     "Failed getting reference voltage.\n");
337 
338 	ret = regulator_enable(adc->vref);
339 	if (ret)
340 		return dev_err_probe(dev, ret,
341 				     "Failed to enable reference voltage.\n");
342 
343 	platform_set_drvdata(pdev, indio_dev);
344 
345 	init_completion(&adc->completion);
346 
347 	indio_dev->name = "imx93-adc";
348 	indio_dev->info = &imx93_adc_iio_info;
349 	indio_dev->modes = INDIO_DIRECT_MODE;
350 	indio_dev->channels = imx93_adc_iio_channels;
351 	indio_dev->num_channels = ARRAY_SIZE(imx93_adc_iio_channels);
352 
353 	ret = clk_prepare_enable(adc->ipg_clk);
354 	if (ret) {
355 		dev_err_probe(dev, ret,
356 			      "Failed to enable ipg clock.\n");
357 		goto error_regulator_disable;
358 	}
359 
360 	ret = request_irq(adc->irq, imx93_adc_isr, 0, IMX93_ADC_DRIVER_NAME, adc);
361 	if (ret < 0) {
362 		dev_err_probe(dev, ret,
363 			      "Failed requesting irq, irq = %d\n", adc->irq);
364 		goto error_ipg_clk_disable;
365 	}
366 
367 	ret = imx93_adc_calibration(adc);
368 	if (ret < 0)
369 		goto error_free_adc_irq;
370 
371 	imx93_adc_config_ad_clk(adc);
372 
373 	ret = iio_device_register(indio_dev);
374 	if (ret) {
375 		dev_err_probe(dev, ret,
376 			      "Failed to register this iio device.\n");
377 		goto error_adc_power_down;
378 	}
379 
380 	pm_runtime_set_active(dev);
381 	pm_runtime_set_autosuspend_delay(dev, 50);
382 	pm_runtime_use_autosuspend(dev);
383 	pm_runtime_enable(dev);
384 
385 	return 0;
386 
387 error_adc_power_down:
388 	imx93_adc_power_down(adc);
389 error_free_adc_irq:
390 	free_irq(adc->irq, adc);
391 error_ipg_clk_disable:
392 	clk_disable_unprepare(adc->ipg_clk);
393 error_regulator_disable:
394 	regulator_disable(adc->vref);
395 
396 	return ret;
397 }
398 
399 static int imx93_adc_remove(struct platform_device *pdev)
400 {
401 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
402 	struct imx93_adc *adc = iio_priv(indio_dev);
403 	struct device *dev = adc->dev;
404 
405 	/* adc power down need clock on */
406 	pm_runtime_get_sync(dev);
407 
408 	pm_runtime_disable(dev);
409 	pm_runtime_dont_use_autosuspend(dev);
410 	pm_runtime_put_noidle(dev);
411 
412 	iio_device_unregister(indio_dev);
413 	imx93_adc_power_down(adc);
414 	free_irq(adc->irq, adc);
415 	clk_disable_unprepare(adc->ipg_clk);
416 	regulator_disable(adc->vref);
417 
418 	return 0;
419 }
420 
421 static int imx93_adc_runtime_suspend(struct device *dev)
422 {
423 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
424 	struct imx93_adc *adc = iio_priv(indio_dev);
425 
426 	imx93_adc_power_down(adc);
427 	clk_disable_unprepare(adc->ipg_clk);
428 	regulator_disable(adc->vref);
429 
430 	return 0;
431 }
432 
433 static int imx93_adc_runtime_resume(struct device *dev)
434 {
435 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
436 	struct imx93_adc *adc = iio_priv(indio_dev);
437 	int ret;
438 
439 	ret = regulator_enable(adc->vref);
440 	if (ret) {
441 		dev_err(dev,
442 			"Can't enable adc reference top voltage, err = %d\n",
443 			ret);
444 		return ret;
445 	}
446 
447 	ret = clk_prepare_enable(adc->ipg_clk);
448 	if (ret) {
449 		dev_err(dev, "Could not prepare or enable clock.\n");
450 		goto err_disable_reg;
451 	}
452 
453 	imx93_adc_power_up(adc);
454 
455 	return 0;
456 
457 err_disable_reg:
458 	regulator_disable(adc->vref);
459 
460 	return ret;
461 }
462 
463 static DEFINE_RUNTIME_DEV_PM_OPS(imx93_adc_pm_ops,
464 				 imx93_adc_runtime_suspend,
465 				 imx93_adc_runtime_resume, NULL);
466 
467 static const struct of_device_id imx93_adc_match[] = {
468 	{ .compatible = "nxp,imx93-adc", },
469 	{ /* sentinel */ }
470 };
471 MODULE_DEVICE_TABLE(of, imx93_adc_match);
472 
473 static struct platform_driver imx93_adc_driver = {
474 	.probe		= imx93_adc_probe,
475 	.remove		= imx93_adc_remove,
476 	.driver		= {
477 		.name	= IMX93_ADC_DRIVER_NAME,
478 		.of_match_table = imx93_adc_match,
479 		.pm	= pm_ptr(&imx93_adc_pm_ops),
480 	},
481 };
482 
483 module_platform_driver(imx93_adc_driver);
484 
485 MODULE_DESCRIPTION("NXP i.MX93 ADC driver");
486 MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>");
487 MODULE_LICENSE("GPL");
488