xref: /openbmc/linux/drivers/iio/adc/imx93_adc.c (revision 47ebd031)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * NXP i.MX93 ADC driver
4  *
5  * Copyright 2023 NXP
6  */
7 
8 #include <linux/bitfield.h>
9 #include <linux/clk.h>
10 #include <linux/completion.h>
11 #include <linux/err.h>
12 #include <linux/iio/iio.h>
13 #include <linux/interrupt.h>
14 #include <linux/io.h>
15 #include <linux/iopoll.h>
16 #include <linux/mod_devicetable.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/regulator/consumer.h>
21 
22 #define IMX93_ADC_DRIVER_NAME	"imx93-adc"
23 
24 /* Register map definition */
25 #define IMX93_ADC_MCR		0x00
26 #define IMX93_ADC_MSR		0x04
27 #define IMX93_ADC_ISR		0x10
28 #define IMX93_ADC_IMR		0x20
29 #define IMX93_ADC_CIMR0		0x24
30 #define IMX93_ADC_CTR0		0x94
31 #define IMX93_ADC_NCMR0		0xA4
32 #define IMX93_ADC_PCDR0		0x100
33 #define IMX93_ADC_PCDR1		0x104
34 #define IMX93_ADC_PCDR2		0x108
35 #define IMX93_ADC_PCDR3		0x10c
36 #define IMX93_ADC_PCDR4		0x110
37 #define IMX93_ADC_PCDR5		0x114
38 #define IMX93_ADC_PCDR6		0x118
39 #define IMX93_ADC_PCDR7		0x11c
40 #define IMX93_ADC_CALSTAT	0x39C
41 
42 /* ADC bit shift */
43 #define IMX93_ADC_MCR_MODE_MASK			BIT(29)
44 #define IMX93_ADC_MCR_NSTART_MASK		BIT(24)
45 #define IMX93_ADC_MCR_CALSTART_MASK		BIT(14)
46 #define IMX93_ADC_MCR_ADCLKSE_MASK		BIT(8)
47 #define IMX93_ADC_MCR_PWDN_MASK			BIT(0)
48 #define IMX93_ADC_MSR_CALFAIL_MASK		BIT(30)
49 #define IMX93_ADC_MSR_CALBUSY_MASK		BIT(29)
50 #define IMX93_ADC_MSR_ADCSTATUS_MASK		GENMASK(2, 0)
51 #define IMX93_ADC_ISR_ECH_MASK			BIT(0)
52 #define IMX93_ADC_ISR_EOC_MASK			BIT(1)
53 #define IMX93_ADC_ISR_EOC_ECH_MASK		(IMX93_ADC_ISR_EOC_MASK | \
54 						 IMX93_ADC_ISR_ECH_MASK)
55 #define IMX93_ADC_IMR_JEOC_MASK			BIT(3)
56 #define IMX93_ADC_IMR_JECH_MASK			BIT(2)
57 #define IMX93_ADC_IMR_EOC_MASK			BIT(1)
58 #define IMX93_ADC_IMR_ECH_MASK			BIT(0)
59 #define IMX93_ADC_PCDR_CDATA_MASK		GENMASK(11, 0)
60 
61 /* ADC status */
62 #define IMX93_ADC_MSR_ADCSTATUS_IDLE			0
63 #define IMX93_ADC_MSR_ADCSTATUS_POWER_DOWN		1
64 #define IMX93_ADC_MSR_ADCSTATUS_WAIT_STATE		2
65 #define IMX93_ADC_MSR_ADCSTATUS_BUSY_IN_CALIBRATION	3
66 #define IMX93_ADC_MSR_ADCSTATUS_SAMPLE			4
67 #define IMX93_ADC_MSR_ADCSTATUS_CONVERSION		6
68 
69 #define IMX93_ADC_TIMEOUT		msecs_to_jiffies(100)
70 
71 struct imx93_adc {
72 	struct device *dev;
73 	void __iomem *regs;
74 	struct clk *ipg_clk;
75 	int irq;
76 	struct regulator *vref;
77 	/* lock to protect against multiple access to the device */
78 	struct mutex lock;
79 	struct completion completion;
80 };
81 
82 #define IMX93_ADC_CHAN(_idx) {					\
83 	.type = IIO_VOLTAGE,					\
84 	.indexed = 1,						\
85 	.channel = (_idx),					\
86 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
87 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
88 				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
89 }
90 
91 static const struct iio_chan_spec imx93_adc_iio_channels[] = {
92 	IMX93_ADC_CHAN(0),
93 	IMX93_ADC_CHAN(1),
94 	IMX93_ADC_CHAN(2),
95 	IMX93_ADC_CHAN(3),
96 };
97 
98 static void imx93_adc_power_down(struct imx93_adc *adc)
99 {
100 	u32 mcr, msr;
101 	int ret;
102 
103 	mcr = readl(adc->regs + IMX93_ADC_MCR);
104 	mcr |= FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1);
105 	writel(mcr, adc->regs + IMX93_ADC_MCR);
106 
107 	ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr,
108 				 ((msr & IMX93_ADC_MSR_ADCSTATUS_MASK) ==
109 				  IMX93_ADC_MSR_ADCSTATUS_POWER_DOWN),
110 				 1, 50);
111 	if (ret == -ETIMEDOUT)
112 		dev_warn(adc->dev,
113 			 "ADC do not in power down mode, current MSR is %x\n",
114 			 msr);
115 }
116 
117 static void imx93_adc_power_up(struct imx93_adc *adc)
118 {
119 	u32 mcr;
120 
121 	/* bring ADC out of power down state, in idle state */
122 	mcr = readl(adc->regs + IMX93_ADC_MCR);
123 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1);
124 	writel(mcr, adc->regs + IMX93_ADC_MCR);
125 }
126 
127 static void imx93_adc_config_ad_clk(struct imx93_adc *adc)
128 {
129 	u32 mcr;
130 
131 	/* put adc in power down mode */
132 	imx93_adc_power_down(adc);
133 
134 	/* config the AD_CLK equal to bus clock */
135 	mcr = readl(adc->regs + IMX93_ADC_MCR);
136 	mcr |= FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1);
137 	writel(mcr, adc->regs + IMX93_ADC_MCR);
138 
139 	imx93_adc_power_up(adc);
140 }
141 
142 static int imx93_adc_calibration(struct imx93_adc *adc)
143 {
144 	u32 mcr, msr;
145 	int ret;
146 
147 	/* make sure ADC in power down mode */
148 	imx93_adc_power_down(adc);
149 
150 	/* config SAR controller operating clock */
151 	mcr = readl(adc->regs + IMX93_ADC_MCR);
152 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1);
153 	writel(mcr, adc->regs + IMX93_ADC_MCR);
154 
155 	imx93_adc_power_up(adc);
156 
157 	/*
158 	 * TODO: we use the default TSAMP/NRSMPL/AVGEN in MCR,
159 	 * can add the setting of these bit if need in future.
160 	 */
161 
162 	/* run calibration */
163 	mcr = readl(adc->regs + IMX93_ADC_MCR);
164 	mcr |= FIELD_PREP(IMX93_ADC_MCR_CALSTART_MASK, 1);
165 	writel(mcr, adc->regs + IMX93_ADC_MCR);
166 
167 	/* wait calibration to be finished */
168 	ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr,
169 		!(msr & IMX93_ADC_MSR_CALBUSY_MASK), 1000, 2000000);
170 	if (ret == -ETIMEDOUT) {
171 		dev_warn(adc->dev, "ADC do not finish calibration in 2 min!\n");
172 		imx93_adc_power_down(adc);
173 		return ret;
174 	}
175 
176 	/* check whether calbration is success or not */
177 	msr = readl(adc->regs + IMX93_ADC_MSR);
178 	if (msr & IMX93_ADC_MSR_CALFAIL_MASK) {
179 		dev_warn(adc->dev, "ADC calibration failed!\n");
180 		imx93_adc_power_down(adc);
181 		return -EAGAIN;
182 	}
183 
184 	return 0;
185 }
186 
187 static int imx93_adc_read_channel_conversion(struct imx93_adc *adc,
188 						int channel_number,
189 						int *result)
190 {
191 	u32 channel;
192 	u32 imr, mcr, pcda;
193 	long ret;
194 
195 	reinit_completion(&adc->completion);
196 
197 	/* config channel mask register */
198 	channel = 1 << channel_number;
199 	writel(channel, adc->regs + IMX93_ADC_NCMR0);
200 
201 	/* TODO: can config desired sample time in CTRn if need */
202 
203 	/* config interrupt mask */
204 	imr = FIELD_PREP(IMX93_ADC_IMR_EOC_MASK, 1);
205 	writel(imr, adc->regs + IMX93_ADC_IMR);
206 	writel(channel, adc->regs + IMX93_ADC_CIMR0);
207 
208 	/* config one-shot mode */
209 	mcr = readl(adc->regs + IMX93_ADC_MCR);
210 	mcr &= ~FIELD_PREP(IMX93_ADC_MCR_MODE_MASK, 1);
211 	writel(mcr, adc->regs + IMX93_ADC_MCR);
212 
213 	/* start normal conversion */
214 	mcr = readl(adc->regs + IMX93_ADC_MCR);
215 	mcr |= FIELD_PREP(IMX93_ADC_MCR_NSTART_MASK, 1);
216 	writel(mcr, adc->regs + IMX93_ADC_MCR);
217 
218 	ret = wait_for_completion_interruptible_timeout(&adc->completion,
219 							IMX93_ADC_TIMEOUT);
220 	if (ret == 0)
221 		return -ETIMEDOUT;
222 
223 	if (ret < 0)
224 		return ret;
225 
226 	pcda = readl(adc->regs + IMX93_ADC_PCDR0 + channel_number * 4);
227 
228 	*result = FIELD_GET(IMX93_ADC_PCDR_CDATA_MASK, pcda);
229 
230 	return ret;
231 }
232 
233 static int imx93_adc_read_raw(struct iio_dev *indio_dev,
234 				struct iio_chan_spec const *chan,
235 				int *val, int *val2, long mask)
236 {
237 	struct imx93_adc *adc = iio_priv(indio_dev);
238 	struct device *dev = adc->dev;
239 	long ret;
240 	u32 vref_uv;
241 
242 	switch (mask) {
243 	case IIO_CHAN_INFO_RAW:
244 		pm_runtime_get_sync(dev);
245 		mutex_lock(&adc->lock);
246 		ret = imx93_adc_read_channel_conversion(adc, chan->channel, val);
247 		mutex_unlock(&adc->lock);
248 		pm_runtime_mark_last_busy(dev);
249 		pm_runtime_put_sync_autosuspend(dev);
250 		if (ret < 0)
251 			return ret;
252 
253 		return IIO_VAL_INT;
254 
255 	case IIO_CHAN_INFO_SCALE:
256 		ret = vref_uv = regulator_get_voltage(adc->vref);
257 		if (ret < 0)
258 			return ret;
259 		*val = vref_uv / 1000;
260 		*val2 = 12;
261 		return IIO_VAL_FRACTIONAL_LOG2;
262 
263 	case IIO_CHAN_INFO_SAMP_FREQ:
264 		*val = clk_get_rate(adc->ipg_clk);
265 		return IIO_VAL_INT;
266 
267 	default:
268 		return -EINVAL;
269 	}
270 }
271 
272 static irqreturn_t imx93_adc_isr(int irq, void *dev_id)
273 {
274 	struct imx93_adc *adc = dev_id;
275 	u32 isr, eoc, unexpected;
276 
277 	isr = readl(adc->regs + IMX93_ADC_ISR);
278 
279 	if (FIELD_GET(IMX93_ADC_ISR_EOC_ECH_MASK, isr)) {
280 		eoc = isr & IMX93_ADC_ISR_EOC_ECH_MASK;
281 		writel(eoc, adc->regs + IMX93_ADC_ISR);
282 		complete(&adc->completion);
283 	}
284 
285 	unexpected = isr & ~IMX93_ADC_ISR_EOC_ECH_MASK;
286 	if (unexpected) {
287 		writel(unexpected, adc->regs + IMX93_ADC_ISR);
288 		dev_err(adc->dev, "Unexpected interrupt 0x%08x.\n", unexpected);
289 		return IRQ_NONE;
290 	}
291 
292 	return IRQ_HANDLED;
293 }
294 
295 static const struct iio_info imx93_adc_iio_info = {
296 	.read_raw = &imx93_adc_read_raw,
297 };
298 
299 static int imx93_adc_probe(struct platform_device *pdev)
300 {
301 	struct imx93_adc *adc;
302 	struct iio_dev *indio_dev;
303 	struct device *dev = &pdev->dev;
304 	int ret;
305 
306 	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
307 	if (!indio_dev)
308 		return dev_err_probe(dev, -ENOMEM,
309 				     "Failed allocating iio device\n");
310 
311 	adc = iio_priv(indio_dev);
312 	adc->dev = dev;
313 
314 	mutex_init(&adc->lock);
315 	adc->regs = devm_platform_ioremap_resource(pdev, 0);
316 	if (IS_ERR(adc->regs))
317 		return dev_err_probe(dev, PTR_ERR(adc->regs),
318 				     "Failed getting ioremap resource\n");
319 
320 	/* The third irq is for ADC conversion usage */
321 	adc->irq = platform_get_irq(pdev, 2);
322 	if (adc->irq < 0)
323 		return adc->irq;
324 
325 	adc->ipg_clk = devm_clk_get(dev, "ipg");
326 	if (IS_ERR(adc->ipg_clk))
327 		return dev_err_probe(dev, PTR_ERR(adc->ipg_clk),
328 				     "Failed getting clock.\n");
329 
330 	adc->vref = devm_regulator_get(dev, "vref");
331 	if (IS_ERR(adc->vref))
332 		return dev_err_probe(dev, PTR_ERR(adc->vref),
333 				     "Failed getting reference voltage.\n");
334 
335 	ret = regulator_enable(adc->vref);
336 	if (ret)
337 		return dev_err_probe(dev, ret,
338 				     "Failed to enable reference voltage.\n");
339 
340 	platform_set_drvdata(pdev, indio_dev);
341 
342 	init_completion(&adc->completion);
343 
344 	indio_dev->name = "imx93-adc";
345 	indio_dev->info = &imx93_adc_iio_info;
346 	indio_dev->modes = INDIO_DIRECT_MODE;
347 	indio_dev->channels = imx93_adc_iio_channels;
348 	indio_dev->num_channels = ARRAY_SIZE(imx93_adc_iio_channels);
349 
350 	ret = clk_prepare_enable(adc->ipg_clk);
351 	if (ret) {
352 		dev_err_probe(dev, ret,
353 			      "Failed to enable ipg clock.\n");
354 		goto error_regulator_disable;
355 	}
356 
357 	ret = request_irq(adc->irq, imx93_adc_isr, 0, IMX93_ADC_DRIVER_NAME, adc);
358 	if (ret < 0) {
359 		dev_err_probe(dev, ret,
360 			      "Failed requesting irq, irq = %d\n", adc->irq);
361 		goto error_ipg_clk_disable;
362 	}
363 
364 	ret = imx93_adc_calibration(adc);
365 	if (ret < 0)
366 		goto error_free_adc_irq;
367 
368 	imx93_adc_config_ad_clk(adc);
369 
370 	ret = iio_device_register(indio_dev);
371 	if (ret) {
372 		dev_err_probe(dev, ret,
373 			      "Failed to register this iio device.\n");
374 		goto error_adc_power_down;
375 	}
376 
377 	pm_runtime_set_active(dev);
378 	pm_runtime_set_autosuspend_delay(dev, 50);
379 	pm_runtime_use_autosuspend(dev);
380 	pm_runtime_enable(dev);
381 
382 	return 0;
383 
384 error_adc_power_down:
385 	imx93_adc_power_down(adc);
386 error_free_adc_irq:
387 	free_irq(adc->irq, adc);
388 error_ipg_clk_disable:
389 	clk_disable_unprepare(adc->ipg_clk);
390 error_regulator_disable:
391 	regulator_disable(adc->vref);
392 
393 	return ret;
394 }
395 
396 static int imx93_adc_remove(struct platform_device *pdev)
397 {
398 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
399 	struct imx93_adc *adc = iio_priv(indio_dev);
400 	struct device *dev = adc->dev;
401 
402 	/* adc power down need clock on */
403 	pm_runtime_get_sync(dev);
404 
405 	pm_runtime_disable(dev);
406 	pm_runtime_dont_use_autosuspend(dev);
407 	pm_runtime_put_noidle(dev);
408 
409 	iio_device_unregister(indio_dev);
410 	imx93_adc_power_down(adc);
411 	free_irq(adc->irq, adc);
412 	clk_disable_unprepare(adc->ipg_clk);
413 	regulator_disable(adc->vref);
414 
415 	return 0;
416 }
417 
418 static int imx93_adc_runtime_suspend(struct device *dev)
419 {
420 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
421 	struct imx93_adc *adc = iio_priv(indio_dev);
422 
423 	imx93_adc_power_down(adc);
424 	clk_disable_unprepare(adc->ipg_clk);
425 	regulator_disable(adc->vref);
426 
427 	return 0;
428 }
429 
430 static int imx93_adc_runtime_resume(struct device *dev)
431 {
432 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
433 	struct imx93_adc *adc = iio_priv(indio_dev);
434 	int ret;
435 
436 	ret = regulator_enable(adc->vref);
437 	if (ret) {
438 		dev_err(dev,
439 			"Can't enable adc reference top voltage, err = %d\n",
440 			ret);
441 		return ret;
442 	}
443 
444 	ret = clk_prepare_enable(adc->ipg_clk);
445 	if (ret) {
446 		dev_err(dev, "Could not prepare or enable clock.\n");
447 		goto err_disable_reg;
448 	}
449 
450 	imx93_adc_power_up(adc);
451 
452 	return 0;
453 
454 err_disable_reg:
455 	regulator_disable(adc->vref);
456 
457 	return ret;
458 }
459 
460 static DEFINE_RUNTIME_DEV_PM_OPS(imx93_adc_pm_ops,
461 				 imx93_adc_runtime_suspend,
462 				 imx93_adc_runtime_resume, NULL);
463 
464 static const struct of_device_id imx93_adc_match[] = {
465 	{ .compatible = "nxp,imx93-adc", },
466 	{ /* sentinel */ }
467 };
468 MODULE_DEVICE_TABLE(of, imx93_adc_match);
469 
470 static struct platform_driver imx93_adc_driver = {
471 	.probe		= imx93_adc_probe,
472 	.remove		= imx93_adc_remove,
473 	.driver		= {
474 		.name	= IMX93_ADC_DRIVER_NAME,
475 		.of_match_table = imx93_adc_match,
476 		.pm	= pm_ptr(&imx93_adc_pm_ops),
477 	},
478 };
479 
480 module_platform_driver(imx93_adc_driver);
481 
482 MODULE_DESCRIPTION("NXP i.MX93 ADC driver");
483 MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>");
484 MODULE_LICENSE("GPL");
485