xref: /openbmc/linux/drivers/iio/adc/fsl-imx25-gcq.c (revision f3539c12)
1 /*
2  * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
3  *
4  * This program is free software; you can redistribute it and/or modify it under
5  * the terms of the GNU General Public License version 2 as published by the
6  * Free Software Foundation.
7  *
8  * This is the driver for the imx25 GCQ (Generic Conversion Queue)
9  * connected to the imx25 ADC.
10  */
11 
12 #include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
13 #include <linux/clk.h>
14 #include <linux/iio/iio.h>
15 #include <linux/interrupt.h>
16 #include <linux/mfd/imx25-tsadc.h>
17 #include <linux/module.h>
18 #include <linux/of.h>
19 #include <linux/platform_device.h>
20 #include <linux/regmap.h>
21 #include <linux/regulator/consumer.h>
22 
23 #define MX25_GCQ_TIMEOUT (msecs_to_jiffies(2000))
24 
25 static const char * const driver_name = "mx25-gcq";
26 
27 enum mx25_gcq_cfgs {
28 	MX25_CFG_XP = 0,
29 	MX25_CFG_YP,
30 	MX25_CFG_XN,
31 	MX25_CFG_YN,
32 	MX25_CFG_WIPER,
33 	MX25_CFG_INAUX0,
34 	MX25_CFG_INAUX1,
35 	MX25_CFG_INAUX2,
36 	MX25_NUM_CFGS,
37 };
38 
39 struct mx25_gcq_priv {
40 	struct regmap *regs;
41 	struct completion completed;
42 	struct clk *clk;
43 	int irq;
44 	struct regulator *vref[4];
45 	u32 channel_vref_mv[MX25_NUM_CFGS];
46 };
47 
48 #define MX25_CQG_CHAN(chan, id) {\
49 	.type = IIO_VOLTAGE,\
50 	.indexed = 1,\
51 	.channel = chan,\
52 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
53 			      BIT(IIO_CHAN_INFO_SCALE),\
54 	.datasheet_name = id,\
55 }
56 
57 static const struct iio_chan_spec mx25_gcq_channels[MX25_NUM_CFGS] = {
58 	MX25_CQG_CHAN(MX25_CFG_XP, "xp"),
59 	MX25_CQG_CHAN(MX25_CFG_YP, "yp"),
60 	MX25_CQG_CHAN(MX25_CFG_XN, "xn"),
61 	MX25_CQG_CHAN(MX25_CFG_YN, "yn"),
62 	MX25_CQG_CHAN(MX25_CFG_WIPER, "wiper"),
63 	MX25_CQG_CHAN(MX25_CFG_INAUX0, "inaux0"),
64 	MX25_CQG_CHAN(MX25_CFG_INAUX1, "inaux1"),
65 	MX25_CQG_CHAN(MX25_CFG_INAUX2, "inaux2"),
66 };
67 
68 static const char * const mx25_gcq_refp_names[] = {
69 	[MX25_ADC_REFP_YP] = "yp",
70 	[MX25_ADC_REFP_XP] = "xp",
71 	[MX25_ADC_REFP_INT] = "int",
72 	[MX25_ADC_REFP_EXT] = "ext",
73 };
74 
75 static irqreturn_t mx25_gcq_irq(int irq, void *data)
76 {
77 	struct mx25_gcq_priv *priv = data;
78 	u32 stats;
79 
80 	regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
81 
82 	if (stats & MX25_ADCQ_SR_EOQ) {
83 		regmap_update_bits(priv->regs, MX25_ADCQ_MR,
84 				   MX25_ADCQ_MR_EOQ_IRQ, MX25_ADCQ_MR_EOQ_IRQ);
85 		complete(&priv->completed);
86 	}
87 
88 	/* Disable conversion queue run */
89 	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 0);
90 
91 	/* Acknowledge all possible irqs */
92 	regmap_write(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR |
93 		     MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR |
94 		     MX25_ADCQ_SR_EOQ | MX25_ADCQ_SR_PD);
95 
96 	return IRQ_HANDLED;
97 }
98 
99 static int mx25_gcq_get_raw_value(struct device *dev,
100 				  struct iio_chan_spec const *chan,
101 				  struct mx25_gcq_priv *priv,
102 				  int *val)
103 {
104 	long timeout;
105 	u32 data;
106 
107 	/* Setup the configuration we want to use */
108 	regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0,
109 		     MX25_ADCQ_ITEM(0, chan->channel));
110 
111 	regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_EOQ_IRQ, 0);
112 
113 	/* Trigger queue for one run */
114 	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS,
115 			   MX25_ADCQ_CR_FQS);
116 
117 	timeout = wait_for_completion_interruptible_timeout(
118 		&priv->completed, MX25_GCQ_TIMEOUT);
119 	if (timeout < 0) {
120 		dev_err(dev, "ADC wait for measurement failed\n");
121 		return timeout;
122 	} else if (timeout == 0) {
123 		dev_err(dev, "ADC timed out\n");
124 		return -ETIMEDOUT;
125 	}
126 
127 	regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
128 
129 	*val = MX25_ADCQ_FIFO_DATA(data);
130 
131 	return IIO_VAL_INT;
132 }
133 
134 static int mx25_gcq_read_raw(struct iio_dev *indio_dev,
135 			     struct iio_chan_spec const *chan, int *val,
136 			     int *val2, long mask)
137 {
138 	struct mx25_gcq_priv *priv = iio_priv(indio_dev);
139 	int ret;
140 
141 	switch (mask) {
142 	case IIO_CHAN_INFO_RAW:
143 		mutex_lock(&indio_dev->mlock);
144 		ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val);
145 		mutex_unlock(&indio_dev->mlock);
146 		return ret;
147 
148 	case IIO_CHAN_INFO_SCALE:
149 		*val = priv->channel_vref_mv[chan->channel];
150 		*val2 = 12;
151 		return IIO_VAL_FRACTIONAL_LOG2;
152 
153 	default:
154 		return -EINVAL;
155 	}
156 }
157 
158 static const struct iio_info mx25_gcq_iio_info = {
159 	.read_raw = mx25_gcq_read_raw,
160 };
161 
162 static const struct regmap_config mx25_gcq_regconfig = {
163 	.max_register = 0x5c,
164 	.reg_bits = 32,
165 	.val_bits = 32,
166 	.reg_stride = 4,
167 };
168 
169 static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
170 			       struct mx25_gcq_priv *priv)
171 {
172 	struct device_node *np = pdev->dev.of_node;
173 	struct device_node *child;
174 	struct device *dev = &pdev->dev;
175 	unsigned int refp_used[4] = {};
176 	int ret, i;
177 
178 	/*
179 	 * Setup all configurations registers with a default conversion
180 	 * configuration for each input
181 	 */
182 	for (i = 0; i < MX25_NUM_CFGS; ++i)
183 		regmap_write(priv->regs, MX25_ADCQ_CFG(i),
184 			     MX25_ADCQ_CFG_YPLL_OFF |
185 			     MX25_ADCQ_CFG_XNUR_OFF |
186 			     MX25_ADCQ_CFG_XPUL_OFF |
187 			     MX25_ADCQ_CFG_REFP_INT |
188 			     MX25_ADCQ_CFG_IN(i) |
189 			     MX25_ADCQ_CFG_REFN_NGND2);
190 
191 	/*
192 	 * First get all regulators to store them in channel_vref_mv if
193 	 * necessary. Later we use that information for proper IIO scale
194 	 * information.
195 	 */
196 	priv->vref[MX25_ADC_REFP_INT] = NULL;
197 	priv->vref[MX25_ADC_REFP_EXT] =
198 		devm_regulator_get_optional(&pdev->dev, "vref-ext");
199 	priv->vref[MX25_ADC_REFP_XP] =
200 		devm_regulator_get_optional(&pdev->dev, "vref-xp");
201 	priv->vref[MX25_ADC_REFP_YP] =
202 		devm_regulator_get_optional(&pdev->dev, "vref-yp");
203 
204 	for_each_child_of_node(np, child) {
205 		u32 reg;
206 		u32 refp = MX25_ADCQ_CFG_REFP_INT;
207 		u32 refn = MX25_ADCQ_CFG_REFN_NGND2;
208 
209 		ret = of_property_read_u32(child, "reg", &reg);
210 		if (ret) {
211 			dev_err(dev, "Failed to get reg property\n");
212 			return ret;
213 		}
214 
215 		if (reg >= MX25_NUM_CFGS) {
216 			dev_err(dev,
217 				"reg value is greater than the number of available configuration registers\n");
218 			return -EINVAL;
219 		}
220 
221 		of_property_read_u32(child, "fsl,adc-refp", &refp);
222 		of_property_read_u32(child, "fsl,adc-refn", &refn);
223 
224 		switch (refp) {
225 		case MX25_ADC_REFP_EXT:
226 		case MX25_ADC_REFP_XP:
227 		case MX25_ADC_REFP_YP:
228 			if (IS_ERR(priv->vref[refp])) {
229 				dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.",
230 					mx25_gcq_refp_names[refp]);
231 				return PTR_ERR(priv->vref[refp]);
232 			}
233 			priv->channel_vref_mv[reg] =
234 				regulator_get_voltage(priv->vref[refp]);
235 			/* Conversion from uV to mV */
236 			priv->channel_vref_mv[reg] /= 1000;
237 			break;
238 		case MX25_ADC_REFP_INT:
239 			priv->channel_vref_mv[reg] = 2500;
240 			break;
241 		default:
242 			dev_err(dev, "Invalid positive reference %d\n", refp);
243 			return -EINVAL;
244 		}
245 
246 		++refp_used[refp];
247 
248 		/*
249 		 * Shift the read values to the correct positions within the
250 		 * register.
251 		 */
252 		refp = MX25_ADCQ_CFG_REFP(refp);
253 		refn = MX25_ADCQ_CFG_REFN(refn);
254 
255 		if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
256 			dev_err(dev, "Invalid fsl,adc-refp property value\n");
257 			return -EINVAL;
258 		}
259 		if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
260 			dev_err(dev, "Invalid fsl,adc-refn property value\n");
261 			return -EINVAL;
262 		}
263 
264 		regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg),
265 				   MX25_ADCQ_CFG_REFP_MASK |
266 				   MX25_ADCQ_CFG_REFN_MASK,
267 				   refp | refn);
268 	}
269 	regmap_update_bits(priv->regs, MX25_ADCQ_CR,
270 			   MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST,
271 			   MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST);
272 
273 	regmap_write(priv->regs, MX25_ADCQ_CR,
274 		     MX25_ADCQ_CR_PDMSK | MX25_ADCQ_CR_QSM_FQS);
275 
276 	/* Remove unused regulators */
277 	for (i = 0; i != 4; ++i) {
278 		if (!refp_used[i]) {
279 			if (!IS_ERR_OR_NULL(priv->vref[i]))
280 				devm_regulator_put(priv->vref[i]);
281 			priv->vref[i] = NULL;
282 		}
283 	}
284 
285 	return 0;
286 }
287 
288 static int mx25_gcq_probe(struct platform_device *pdev)
289 {
290 	struct iio_dev *indio_dev;
291 	struct mx25_gcq_priv *priv;
292 	struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
293 	struct device *dev = &pdev->dev;
294 	struct resource *res;
295 	void __iomem *mem;
296 	int ret;
297 	int i;
298 
299 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
300 	if (!indio_dev)
301 		return -ENOMEM;
302 
303 	priv = iio_priv(indio_dev);
304 
305 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
306 	mem = devm_ioremap_resource(dev, res);
307 	if (IS_ERR(mem))
308 		return PTR_ERR(mem);
309 
310 	priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig);
311 	if (IS_ERR(priv->regs)) {
312 		dev_err(dev, "Failed to initialize regmap\n");
313 		return PTR_ERR(priv->regs);
314 	}
315 
316 	init_completion(&priv->completed);
317 
318 	ret = mx25_gcq_setup_cfgs(pdev, priv);
319 	if (ret)
320 		return ret;
321 
322 	for (i = 0; i != 4; ++i) {
323 		if (!priv->vref[i])
324 			continue;
325 
326 		ret = regulator_enable(priv->vref[i]);
327 		if (ret)
328 			goto err_regulator_disable;
329 	}
330 
331 	priv->clk = tsadc->clk;
332 	ret = clk_prepare_enable(priv->clk);
333 	if (ret) {
334 		dev_err(dev, "Failed to enable clock\n");
335 		goto err_vref_disable;
336 	}
337 
338 	priv->irq = platform_get_irq(pdev, 0);
339 	if (priv->irq <= 0) {
340 		dev_err(dev, "Failed to get IRQ\n");
341 		ret = priv->irq;
342 		if (!ret)
343 			ret = -ENXIO;
344 		goto err_clk_unprepare;
345 	}
346 
347 	ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv);
348 	if (ret) {
349 		dev_err(dev, "Failed requesting IRQ\n");
350 		goto err_clk_unprepare;
351 	}
352 
353 	indio_dev->dev.parent = &pdev->dev;
354 	indio_dev->channels = mx25_gcq_channels;
355 	indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
356 	indio_dev->info = &mx25_gcq_iio_info;
357 	indio_dev->name = driver_name;
358 
359 	ret = iio_device_register(indio_dev);
360 	if (ret) {
361 		dev_err(dev, "Failed to register iio device\n");
362 		goto err_irq_free;
363 	}
364 
365 	platform_set_drvdata(pdev, indio_dev);
366 
367 	return 0;
368 
369 err_irq_free:
370 	free_irq(priv->irq, priv);
371 err_clk_unprepare:
372 	clk_disable_unprepare(priv->clk);
373 err_vref_disable:
374 	i = 4;
375 err_regulator_disable:
376 	for (; i-- > 0;) {
377 		if (priv->vref[i])
378 			regulator_disable(priv->vref[i]);
379 	}
380 	return ret;
381 }
382 
383 static int mx25_gcq_remove(struct platform_device *pdev)
384 {
385 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
386 	struct mx25_gcq_priv *priv = iio_priv(indio_dev);
387 	int i;
388 
389 	iio_device_unregister(indio_dev);
390 	free_irq(priv->irq, priv);
391 	clk_disable_unprepare(priv->clk);
392 	for (i = 4; i-- > 0;) {
393 		if (priv->vref[i])
394 			regulator_disable(priv->vref[i]);
395 	}
396 
397 	return 0;
398 }
399 
400 static const struct of_device_id mx25_gcq_ids[] = {
401 	{ .compatible = "fsl,imx25-gcq", },
402 	{ /* Sentinel */ }
403 };
404 
405 static struct platform_driver mx25_gcq_driver = {
406 	.driver		= {
407 		.name	= "mx25-gcq",
408 		.of_match_table = mx25_gcq_ids,
409 	},
410 	.probe		= mx25_gcq_probe,
411 	.remove		= mx25_gcq_remove,
412 };
413 module_platform_driver(mx25_gcq_driver);
414 
415 MODULE_DESCRIPTION("ADC driver for Freescale mx25");
416 MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
417 MODULE_LICENSE("GPL v2");
418