xref: /openbmc/linux/drivers/iio/adc/fsl-imx25-gcq.c (revision 6c33a6f4)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
4  *
5  * This is the driver for the imx25 GCQ (Generic Conversion Queue)
6  * connected to the imx25 ADC.
7  */
8 
9 #include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
10 #include <linux/clk.h>
11 #include <linux/iio/iio.h>
12 #include <linux/interrupt.h>
13 #include <linux/mfd/imx25-tsadc.h>
14 #include <linux/module.h>
15 #include <linux/of.h>
16 #include <linux/platform_device.h>
17 #include <linux/regmap.h>
18 #include <linux/regulator/consumer.h>
19 
20 #define MX25_GCQ_TIMEOUT (msecs_to_jiffies(2000))
21 
22 static const char * const driver_name = "mx25-gcq";
23 
24 enum mx25_gcq_cfgs {
25 	MX25_CFG_XP = 0,
26 	MX25_CFG_YP,
27 	MX25_CFG_XN,
28 	MX25_CFG_YN,
29 	MX25_CFG_WIPER,
30 	MX25_CFG_INAUX0,
31 	MX25_CFG_INAUX1,
32 	MX25_CFG_INAUX2,
33 	MX25_NUM_CFGS,
34 };
35 
36 struct mx25_gcq_priv {
37 	struct regmap *regs;
38 	struct completion completed;
39 	struct clk *clk;
40 	int irq;
41 	struct regulator *vref[4];
42 	u32 channel_vref_mv[MX25_NUM_CFGS];
43 };
44 
45 #define MX25_CQG_CHAN(chan, id) {\
46 	.type = IIO_VOLTAGE,\
47 	.indexed = 1,\
48 	.channel = chan,\
49 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
50 			      BIT(IIO_CHAN_INFO_SCALE),\
51 	.datasheet_name = id,\
52 }
53 
54 static const struct iio_chan_spec mx25_gcq_channels[MX25_NUM_CFGS] = {
55 	MX25_CQG_CHAN(MX25_CFG_XP, "xp"),
56 	MX25_CQG_CHAN(MX25_CFG_YP, "yp"),
57 	MX25_CQG_CHAN(MX25_CFG_XN, "xn"),
58 	MX25_CQG_CHAN(MX25_CFG_YN, "yn"),
59 	MX25_CQG_CHAN(MX25_CFG_WIPER, "wiper"),
60 	MX25_CQG_CHAN(MX25_CFG_INAUX0, "inaux0"),
61 	MX25_CQG_CHAN(MX25_CFG_INAUX1, "inaux1"),
62 	MX25_CQG_CHAN(MX25_CFG_INAUX2, "inaux2"),
63 };
64 
65 static const char * const mx25_gcq_refp_names[] = {
66 	[MX25_ADC_REFP_YP] = "yp",
67 	[MX25_ADC_REFP_XP] = "xp",
68 	[MX25_ADC_REFP_INT] = "int",
69 	[MX25_ADC_REFP_EXT] = "ext",
70 };
71 
72 static irqreturn_t mx25_gcq_irq(int irq, void *data)
73 {
74 	struct mx25_gcq_priv *priv = data;
75 	u32 stats;
76 
77 	regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
78 
79 	if (stats & MX25_ADCQ_SR_EOQ) {
80 		regmap_update_bits(priv->regs, MX25_ADCQ_MR,
81 				   MX25_ADCQ_MR_EOQ_IRQ, MX25_ADCQ_MR_EOQ_IRQ);
82 		complete(&priv->completed);
83 	}
84 
85 	/* Disable conversion queue run */
86 	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 0);
87 
88 	/* Acknowledge all possible irqs */
89 	regmap_write(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR |
90 		     MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR |
91 		     MX25_ADCQ_SR_EOQ | MX25_ADCQ_SR_PD);
92 
93 	return IRQ_HANDLED;
94 }
95 
96 static int mx25_gcq_get_raw_value(struct device *dev,
97 				  struct iio_chan_spec const *chan,
98 				  struct mx25_gcq_priv *priv,
99 				  int *val)
100 {
101 	long timeout;
102 	u32 data;
103 
104 	/* Setup the configuration we want to use */
105 	regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0,
106 		     MX25_ADCQ_ITEM(0, chan->channel));
107 
108 	regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_EOQ_IRQ, 0);
109 
110 	/* Trigger queue for one run */
111 	regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS,
112 			   MX25_ADCQ_CR_FQS);
113 
114 	timeout = wait_for_completion_interruptible_timeout(
115 		&priv->completed, MX25_GCQ_TIMEOUT);
116 	if (timeout < 0) {
117 		dev_err(dev, "ADC wait for measurement failed\n");
118 		return timeout;
119 	} else if (timeout == 0) {
120 		dev_err(dev, "ADC timed out\n");
121 		return -ETIMEDOUT;
122 	}
123 
124 	regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
125 
126 	*val = MX25_ADCQ_FIFO_DATA(data);
127 
128 	return IIO_VAL_INT;
129 }
130 
131 static int mx25_gcq_read_raw(struct iio_dev *indio_dev,
132 			     struct iio_chan_spec const *chan, int *val,
133 			     int *val2, long mask)
134 {
135 	struct mx25_gcq_priv *priv = iio_priv(indio_dev);
136 	int ret;
137 
138 	switch (mask) {
139 	case IIO_CHAN_INFO_RAW:
140 		mutex_lock(&indio_dev->mlock);
141 		ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val);
142 		mutex_unlock(&indio_dev->mlock);
143 		return ret;
144 
145 	case IIO_CHAN_INFO_SCALE:
146 		*val = priv->channel_vref_mv[chan->channel];
147 		*val2 = 12;
148 		return IIO_VAL_FRACTIONAL_LOG2;
149 
150 	default:
151 		return -EINVAL;
152 	}
153 }
154 
155 static const struct iio_info mx25_gcq_iio_info = {
156 	.read_raw = mx25_gcq_read_raw,
157 };
158 
159 static const struct regmap_config mx25_gcq_regconfig = {
160 	.max_register = 0x5c,
161 	.reg_bits = 32,
162 	.val_bits = 32,
163 	.reg_stride = 4,
164 };
165 
166 static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
167 			       struct mx25_gcq_priv *priv)
168 {
169 	struct device_node *np = pdev->dev.of_node;
170 	struct device_node *child;
171 	struct device *dev = &pdev->dev;
172 	unsigned int refp_used[4] = {};
173 	int ret, i;
174 
175 	/*
176 	 * Setup all configurations registers with a default conversion
177 	 * configuration for each input
178 	 */
179 	for (i = 0; i < MX25_NUM_CFGS; ++i)
180 		regmap_write(priv->regs, MX25_ADCQ_CFG(i),
181 			     MX25_ADCQ_CFG_YPLL_OFF |
182 			     MX25_ADCQ_CFG_XNUR_OFF |
183 			     MX25_ADCQ_CFG_XPUL_OFF |
184 			     MX25_ADCQ_CFG_REFP_INT |
185 			     MX25_ADCQ_CFG_IN(i) |
186 			     MX25_ADCQ_CFG_REFN_NGND2);
187 
188 	/*
189 	 * First get all regulators to store them in channel_vref_mv if
190 	 * necessary. Later we use that information for proper IIO scale
191 	 * information.
192 	 */
193 	priv->vref[MX25_ADC_REFP_INT] = NULL;
194 	priv->vref[MX25_ADC_REFP_EXT] =
195 		devm_regulator_get_optional(&pdev->dev, "vref-ext");
196 	priv->vref[MX25_ADC_REFP_XP] =
197 		devm_regulator_get_optional(&pdev->dev, "vref-xp");
198 	priv->vref[MX25_ADC_REFP_YP] =
199 		devm_regulator_get_optional(&pdev->dev, "vref-yp");
200 
201 	for_each_child_of_node(np, child) {
202 		u32 reg;
203 		u32 refp = MX25_ADCQ_CFG_REFP_INT;
204 		u32 refn = MX25_ADCQ_CFG_REFN_NGND2;
205 
206 		ret = of_property_read_u32(child, "reg", &reg);
207 		if (ret) {
208 			dev_err(dev, "Failed to get reg property\n");
209 			of_node_put(child);
210 			return ret;
211 		}
212 
213 		if (reg >= MX25_NUM_CFGS) {
214 			dev_err(dev,
215 				"reg value is greater than the number of available configuration registers\n");
216 			of_node_put(child);
217 			return -EINVAL;
218 		}
219 
220 		of_property_read_u32(child, "fsl,adc-refp", &refp);
221 		of_property_read_u32(child, "fsl,adc-refn", &refn);
222 
223 		switch (refp) {
224 		case MX25_ADC_REFP_EXT:
225 		case MX25_ADC_REFP_XP:
226 		case MX25_ADC_REFP_YP:
227 			if (IS_ERR(priv->vref[refp])) {
228 				dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.",
229 					mx25_gcq_refp_names[refp]);
230 				of_node_put(child);
231 				return PTR_ERR(priv->vref[refp]);
232 			}
233 			priv->channel_vref_mv[reg] =
234 				regulator_get_voltage(priv->vref[refp]);
235 			/* Conversion from uV to mV */
236 			priv->channel_vref_mv[reg] /= 1000;
237 			break;
238 		case MX25_ADC_REFP_INT:
239 			priv->channel_vref_mv[reg] = 2500;
240 			break;
241 		default:
242 			dev_err(dev, "Invalid positive reference %d\n", refp);
243 			of_node_put(child);
244 			return -EINVAL;
245 		}
246 
247 		++refp_used[refp];
248 
249 		/*
250 		 * Shift the read values to the correct positions within the
251 		 * register.
252 		 */
253 		refp = MX25_ADCQ_CFG_REFP(refp);
254 		refn = MX25_ADCQ_CFG_REFN(refn);
255 
256 		if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
257 			dev_err(dev, "Invalid fsl,adc-refp property value\n");
258 			of_node_put(child);
259 			return -EINVAL;
260 		}
261 		if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
262 			dev_err(dev, "Invalid fsl,adc-refn property value\n");
263 			of_node_put(child);
264 			return -EINVAL;
265 		}
266 
267 		regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg),
268 				   MX25_ADCQ_CFG_REFP_MASK |
269 				   MX25_ADCQ_CFG_REFN_MASK,
270 				   refp | refn);
271 	}
272 	regmap_update_bits(priv->regs, MX25_ADCQ_CR,
273 			   MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST,
274 			   MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST);
275 
276 	regmap_write(priv->regs, MX25_ADCQ_CR,
277 		     MX25_ADCQ_CR_PDMSK | MX25_ADCQ_CR_QSM_FQS);
278 
279 	/* Remove unused regulators */
280 	for (i = 0; i != 4; ++i) {
281 		if (!refp_used[i]) {
282 			if (!IS_ERR_OR_NULL(priv->vref[i]))
283 				devm_regulator_put(priv->vref[i]);
284 			priv->vref[i] = NULL;
285 		}
286 	}
287 
288 	return 0;
289 }
290 
291 static int mx25_gcq_probe(struct platform_device *pdev)
292 {
293 	struct iio_dev *indio_dev;
294 	struct mx25_gcq_priv *priv;
295 	struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
296 	struct device *dev = &pdev->dev;
297 	struct resource *res;
298 	void __iomem *mem;
299 	int ret;
300 	int i;
301 
302 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
303 	if (!indio_dev)
304 		return -ENOMEM;
305 
306 	priv = iio_priv(indio_dev);
307 
308 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
309 	mem = devm_ioremap_resource(dev, res);
310 	if (IS_ERR(mem))
311 		return PTR_ERR(mem);
312 
313 	priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig);
314 	if (IS_ERR(priv->regs)) {
315 		dev_err(dev, "Failed to initialize regmap\n");
316 		return PTR_ERR(priv->regs);
317 	}
318 
319 	init_completion(&priv->completed);
320 
321 	ret = mx25_gcq_setup_cfgs(pdev, priv);
322 	if (ret)
323 		return ret;
324 
325 	for (i = 0; i != 4; ++i) {
326 		if (!priv->vref[i])
327 			continue;
328 
329 		ret = regulator_enable(priv->vref[i]);
330 		if (ret)
331 			goto err_regulator_disable;
332 	}
333 
334 	priv->clk = tsadc->clk;
335 	ret = clk_prepare_enable(priv->clk);
336 	if (ret) {
337 		dev_err(dev, "Failed to enable clock\n");
338 		goto err_vref_disable;
339 	}
340 
341 	priv->irq = platform_get_irq(pdev, 0);
342 	if (priv->irq <= 0) {
343 		ret = priv->irq;
344 		if (!ret)
345 			ret = -ENXIO;
346 		goto err_clk_unprepare;
347 	}
348 
349 	ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv);
350 	if (ret) {
351 		dev_err(dev, "Failed requesting IRQ\n");
352 		goto err_clk_unprepare;
353 	}
354 
355 	indio_dev->dev.parent = &pdev->dev;
356 	indio_dev->channels = mx25_gcq_channels;
357 	indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
358 	indio_dev->info = &mx25_gcq_iio_info;
359 	indio_dev->name = driver_name;
360 
361 	ret = iio_device_register(indio_dev);
362 	if (ret) {
363 		dev_err(dev, "Failed to register iio device\n");
364 		goto err_irq_free;
365 	}
366 
367 	platform_set_drvdata(pdev, indio_dev);
368 
369 	return 0;
370 
371 err_irq_free:
372 	free_irq(priv->irq, priv);
373 err_clk_unprepare:
374 	clk_disable_unprepare(priv->clk);
375 err_vref_disable:
376 	i = 4;
377 err_regulator_disable:
378 	for (; i-- > 0;) {
379 		if (priv->vref[i])
380 			regulator_disable(priv->vref[i]);
381 	}
382 	return ret;
383 }
384 
385 static int mx25_gcq_remove(struct platform_device *pdev)
386 {
387 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
388 	struct mx25_gcq_priv *priv = iio_priv(indio_dev);
389 	int i;
390 
391 	iio_device_unregister(indio_dev);
392 	free_irq(priv->irq, priv);
393 	clk_disable_unprepare(priv->clk);
394 	for (i = 4; i-- > 0;) {
395 		if (priv->vref[i])
396 			regulator_disable(priv->vref[i]);
397 	}
398 
399 	return 0;
400 }
401 
402 static const struct of_device_id mx25_gcq_ids[] = {
403 	{ .compatible = "fsl,imx25-gcq", },
404 	{ /* Sentinel */ }
405 };
406 MODULE_DEVICE_TABLE(of, mx25_gcq_ids);
407 
408 static struct platform_driver mx25_gcq_driver = {
409 	.driver		= {
410 		.name	= "mx25-gcq",
411 		.of_match_table = mx25_gcq_ids,
412 	},
413 	.probe		= mx25_gcq_probe,
414 	.remove		= mx25_gcq_remove,
415 };
416 module_platform_driver(mx25_gcq_driver);
417 
418 MODULE_DESCRIPTION("ADC driver for Freescale mx25");
419 MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
420 MODULE_LICENSE("GPL v2");
421