1 /* 2 * exynos_adc.c - Support for ADC in EXYNOS SoCs 3 * 4 * 8 ~ 10 channel, 10/12-bit ADC 5 * 6 * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include <linux/module.h> 24 #include <linux/platform_device.h> 25 #include <linux/interrupt.h> 26 #include <linux/delay.h> 27 #include <linux/errno.h> 28 #include <linux/kernel.h> 29 #include <linux/slab.h> 30 #include <linux/io.h> 31 #include <linux/clk.h> 32 #include <linux/completion.h> 33 #include <linux/of.h> 34 #include <linux/of_irq.h> 35 #include <linux/regulator/consumer.h> 36 #include <linux/of_platform.h> 37 #include <linux/err.h> 38 #include <linux/input.h> 39 40 #include <linux/iio/iio.h> 41 #include <linux/iio/machine.h> 42 #include <linux/iio/driver.h> 43 #include <linux/mfd/syscon.h> 44 #include <linux/regmap.h> 45 46 #include <linux/platform_data/touchscreen-s3c2410.h> 47 48 /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */ 49 #define ADC_V1_CON(x) ((x) + 0x00) 50 #define ADC_V1_TSC(x) ((x) + 0x04) 51 #define ADC_V1_DLY(x) ((x) + 0x08) 52 #define ADC_V1_DATX(x) ((x) + 0x0C) 53 #define ADC_V1_DATY(x) ((x) + 0x10) 54 #define ADC_V1_UPDN(x) ((x) + 0x14) 55 #define ADC_V1_INTCLR(x) ((x) + 0x18) 56 #define ADC_V1_MUX(x) ((x) + 0x1c) 57 #define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20) 58 59 /* S3C2410 ADC registers definitions */ 60 #define ADC_S3C2410_MUX(x) ((x) + 0x18) 61 62 /* Future ADC_V2 registers definitions */ 63 #define ADC_V2_CON1(x) ((x) + 0x00) 64 #define ADC_V2_CON2(x) ((x) + 0x04) 65 #define ADC_V2_STAT(x) ((x) + 0x08) 66 #define ADC_V2_INT_EN(x) ((x) + 0x10) 67 #define ADC_V2_INT_ST(x) ((x) + 0x14) 68 #define ADC_V2_VER(x) ((x) + 0x20) 69 70 /* Bit definitions for ADC_V1 */ 71 #define ADC_V1_CON_RES (1u << 16) 72 #define ADC_V1_CON_PRSCEN (1u << 14) 73 #define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6) 74 #define ADC_V1_CON_STANDBY (1u << 2) 75 76 /* Bit definitions for S3C2410 ADC */ 77 #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3) 78 #define ADC_S3C2410_DATX_MASK 0x3FF 79 #define ADC_S3C2416_CON_RES_SEL (1u << 3) 80 81 /* touch screen always uses channel 0 */ 82 #define ADC_S3C2410_MUX_TS 0 83 84 /* ADCTSC Register Bits */ 85 #define ADC_S3C2443_TSC_UD_SEN (1u << 8) 86 #define ADC_S3C2410_TSC_YM_SEN (1u << 7) 87 #define ADC_S3C2410_TSC_YP_SEN (1u << 6) 88 #define ADC_S3C2410_TSC_XM_SEN (1u << 5) 89 #define ADC_S3C2410_TSC_XP_SEN (1u << 4) 90 #define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3) 91 #define ADC_S3C2410_TSC_AUTO_PST (1u << 2) 92 #define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0) 93 94 #define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \ 95 ADC_S3C2410_TSC_YP_SEN | \ 96 ADC_S3C2410_TSC_XP_SEN | \ 97 ADC_S3C2410_TSC_XY_PST(3)) 98 99 #define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \ 100 ADC_S3C2410_TSC_YP_SEN | \ 101 ADC_S3C2410_TSC_XP_SEN | \ 102 ADC_S3C2410_TSC_AUTO_PST | \ 103 ADC_S3C2410_TSC_XY_PST(0)) 104 105 /* Bit definitions for ADC_V2 */ 106 #define ADC_V2_CON1_SOFT_RESET (1u << 2) 107 108 #define ADC_V2_CON2_OSEL (1u << 10) 109 #define ADC_V2_CON2_ESEL (1u << 9) 110 #define ADC_V2_CON2_HIGHF (1u << 8) 111 #define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4) 112 #define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0) 113 #define ADC_V2_CON2_ACH_MASK 0xF 114 115 #define MAX_ADC_V2_CHANNELS 10 116 #define MAX_ADC_V1_CHANNELS 8 117 #define MAX_EXYNOS3250_ADC_CHANNELS 2 118 119 /* Bit definitions common for ADC_V1 and ADC_V2 */ 120 #define ADC_CON_EN_START (1u << 0) 121 #define ADC_CON_EN_START_MASK (0x3 << 0) 122 #define ADC_DATX_PRESSED (1u << 15) 123 #define ADC_DATX_MASK 0xFFF 124 #define ADC_DATY_MASK 0xFFF 125 126 #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) 127 128 #define EXYNOS_ADCV1_PHY_OFFSET 0x0718 129 #define EXYNOS_ADCV2_PHY_OFFSET 0x0720 130 131 struct exynos_adc { 132 struct exynos_adc_data *data; 133 struct device *dev; 134 struct input_dev *input; 135 void __iomem *regs; 136 struct regmap *pmu_map; 137 struct clk *clk; 138 struct clk *sclk; 139 unsigned int irq; 140 unsigned int tsirq; 141 unsigned int delay; 142 struct regulator *vdd; 143 144 struct completion completion; 145 146 u32 value; 147 unsigned int version; 148 149 bool read_ts; 150 u32 ts_x; 151 u32 ts_y; 152 }; 153 154 struct exynos_adc_data { 155 int num_channels; 156 bool needs_sclk; 157 bool needs_adc_phy; 158 int phy_offset; 159 u32 mask; 160 161 void (*init_hw)(struct exynos_adc *info); 162 void (*exit_hw)(struct exynos_adc *info); 163 void (*clear_irq)(struct exynos_adc *info); 164 void (*start_conv)(struct exynos_adc *info, unsigned long addr); 165 }; 166 167 static void exynos_adc_unprepare_clk(struct exynos_adc *info) 168 { 169 if (info->data->needs_sclk) 170 clk_unprepare(info->sclk); 171 clk_unprepare(info->clk); 172 } 173 174 static int exynos_adc_prepare_clk(struct exynos_adc *info) 175 { 176 int ret; 177 178 ret = clk_prepare(info->clk); 179 if (ret) { 180 dev_err(info->dev, "failed preparing adc clock: %d\n", ret); 181 return ret; 182 } 183 184 if (info->data->needs_sclk) { 185 ret = clk_prepare(info->sclk); 186 if (ret) { 187 clk_unprepare(info->clk); 188 dev_err(info->dev, 189 "failed preparing sclk_adc clock: %d\n", ret); 190 return ret; 191 } 192 } 193 194 return 0; 195 } 196 197 static void exynos_adc_disable_clk(struct exynos_adc *info) 198 { 199 if (info->data->needs_sclk) 200 clk_disable(info->sclk); 201 clk_disable(info->clk); 202 } 203 204 static int exynos_adc_enable_clk(struct exynos_adc *info) 205 { 206 int ret; 207 208 ret = clk_enable(info->clk); 209 if (ret) { 210 dev_err(info->dev, "failed enabling adc clock: %d\n", ret); 211 return ret; 212 } 213 214 if (info->data->needs_sclk) { 215 ret = clk_enable(info->sclk); 216 if (ret) { 217 clk_disable(info->clk); 218 dev_err(info->dev, 219 "failed enabling sclk_adc clock: %d\n", ret); 220 return ret; 221 } 222 } 223 224 return 0; 225 } 226 227 static void exynos_adc_v1_init_hw(struct exynos_adc *info) 228 { 229 u32 con1; 230 231 if (info->data->needs_adc_phy) 232 regmap_write(info->pmu_map, info->data->phy_offset, 1); 233 234 /* set default prescaler values and Enable prescaler */ 235 con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; 236 237 /* Enable 12-bit ADC resolution */ 238 con1 |= ADC_V1_CON_RES; 239 writel(con1, ADC_V1_CON(info->regs)); 240 241 /* set touchscreen delay */ 242 writel(info->delay, ADC_V1_DLY(info->regs)); 243 } 244 245 static void exynos_adc_v1_exit_hw(struct exynos_adc *info) 246 { 247 u32 con; 248 249 if (info->data->needs_adc_phy) 250 regmap_write(info->pmu_map, info->data->phy_offset, 0); 251 252 con = readl(ADC_V1_CON(info->regs)); 253 con |= ADC_V1_CON_STANDBY; 254 writel(con, ADC_V1_CON(info->regs)); 255 } 256 257 static void exynos_adc_v1_clear_irq(struct exynos_adc *info) 258 { 259 writel(1, ADC_V1_INTCLR(info->regs)); 260 } 261 262 static void exynos_adc_v1_start_conv(struct exynos_adc *info, 263 unsigned long addr) 264 { 265 u32 con1; 266 267 writel(addr, ADC_V1_MUX(info->regs)); 268 269 con1 = readl(ADC_V1_CON(info->regs)); 270 writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); 271 } 272 273 static const struct exynos_adc_data exynos_adc_v1_data = { 274 .num_channels = MAX_ADC_V1_CHANNELS, 275 .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ 276 .needs_adc_phy = true, 277 .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, 278 279 .init_hw = exynos_adc_v1_init_hw, 280 .exit_hw = exynos_adc_v1_exit_hw, 281 .clear_irq = exynos_adc_v1_clear_irq, 282 .start_conv = exynos_adc_v1_start_conv, 283 }; 284 285 static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info, 286 unsigned long addr) 287 { 288 u32 con1; 289 290 /* Enable 12 bit ADC resolution */ 291 con1 = readl(ADC_V1_CON(info->regs)); 292 con1 |= ADC_S3C2416_CON_RES_SEL; 293 writel(con1, ADC_V1_CON(info->regs)); 294 295 /* Select channel for S3C2416 */ 296 writel(addr, ADC_S3C2410_MUX(info->regs)); 297 298 con1 = readl(ADC_V1_CON(info->regs)); 299 writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); 300 } 301 302 static struct exynos_adc_data const exynos_adc_s3c2416_data = { 303 .num_channels = MAX_ADC_V1_CHANNELS, 304 .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ 305 306 .init_hw = exynos_adc_v1_init_hw, 307 .exit_hw = exynos_adc_v1_exit_hw, 308 .start_conv = exynos_adc_s3c2416_start_conv, 309 }; 310 311 static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info, 312 unsigned long addr) 313 { 314 u32 con1; 315 316 /* Select channel for S3C2433 */ 317 writel(addr, ADC_S3C2410_MUX(info->regs)); 318 319 con1 = readl(ADC_V1_CON(info->regs)); 320 writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); 321 } 322 323 static struct exynos_adc_data const exynos_adc_s3c2443_data = { 324 .num_channels = MAX_ADC_V1_CHANNELS, 325 .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ 326 327 .init_hw = exynos_adc_v1_init_hw, 328 .exit_hw = exynos_adc_v1_exit_hw, 329 .start_conv = exynos_adc_s3c2443_start_conv, 330 }; 331 332 static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info, 333 unsigned long addr) 334 { 335 u32 con1; 336 337 con1 = readl(ADC_V1_CON(info->regs)); 338 con1 &= ~ADC_S3C2410_CON_SELMUX(0x7); 339 con1 |= ADC_S3C2410_CON_SELMUX(addr); 340 writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); 341 } 342 343 static struct exynos_adc_data const exynos_adc_s3c24xx_data = { 344 .num_channels = MAX_ADC_V1_CHANNELS, 345 .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ 346 347 .init_hw = exynos_adc_v1_init_hw, 348 .exit_hw = exynos_adc_v1_exit_hw, 349 .start_conv = exynos_adc_s3c64xx_start_conv, 350 }; 351 352 static struct exynos_adc_data const exynos_adc_s3c64xx_data = { 353 .num_channels = MAX_ADC_V1_CHANNELS, 354 .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ 355 356 .init_hw = exynos_adc_v1_init_hw, 357 .exit_hw = exynos_adc_v1_exit_hw, 358 .clear_irq = exynos_adc_v1_clear_irq, 359 .start_conv = exynos_adc_s3c64xx_start_conv, 360 }; 361 362 static void exynos_adc_v2_init_hw(struct exynos_adc *info) 363 { 364 u32 con1, con2; 365 366 if (info->data->needs_adc_phy) 367 regmap_write(info->pmu_map, info->data->phy_offset, 1); 368 369 con1 = ADC_V2_CON1_SOFT_RESET; 370 writel(con1, ADC_V2_CON1(info->regs)); 371 372 con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | 373 ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); 374 writel(con2, ADC_V2_CON2(info->regs)); 375 376 /* Enable interrupts */ 377 writel(1, ADC_V2_INT_EN(info->regs)); 378 } 379 380 static void exynos_adc_v2_exit_hw(struct exynos_adc *info) 381 { 382 u32 con; 383 384 if (info->data->needs_adc_phy) 385 regmap_write(info->pmu_map, info->data->phy_offset, 0); 386 387 con = readl(ADC_V2_CON1(info->regs)); 388 con &= ~ADC_CON_EN_START; 389 writel(con, ADC_V2_CON1(info->regs)); 390 } 391 392 static void exynos_adc_v2_clear_irq(struct exynos_adc *info) 393 { 394 writel(1, ADC_V2_INT_ST(info->regs)); 395 } 396 397 static void exynos_adc_v2_start_conv(struct exynos_adc *info, 398 unsigned long addr) 399 { 400 u32 con1, con2; 401 402 con2 = readl(ADC_V2_CON2(info->regs)); 403 con2 &= ~ADC_V2_CON2_ACH_MASK; 404 con2 |= ADC_V2_CON2_ACH_SEL(addr); 405 writel(con2, ADC_V2_CON2(info->regs)); 406 407 con1 = readl(ADC_V2_CON1(info->regs)); 408 writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs)); 409 } 410 411 static const struct exynos_adc_data exynos_adc_v2_data = { 412 .num_channels = MAX_ADC_V2_CHANNELS, 413 .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ 414 .needs_adc_phy = true, 415 .phy_offset = EXYNOS_ADCV2_PHY_OFFSET, 416 417 .init_hw = exynos_adc_v2_init_hw, 418 .exit_hw = exynos_adc_v2_exit_hw, 419 .clear_irq = exynos_adc_v2_clear_irq, 420 .start_conv = exynos_adc_v2_start_conv, 421 }; 422 423 static const struct exynos_adc_data exynos3250_adc_data = { 424 .num_channels = MAX_EXYNOS3250_ADC_CHANNELS, 425 .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ 426 .needs_sclk = true, 427 .needs_adc_phy = true, 428 .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, 429 430 .init_hw = exynos_adc_v2_init_hw, 431 .exit_hw = exynos_adc_v2_exit_hw, 432 .clear_irq = exynos_adc_v2_clear_irq, 433 .start_conv = exynos_adc_v2_start_conv, 434 }; 435 436 static void exynos_adc_exynos7_init_hw(struct exynos_adc *info) 437 { 438 u32 con1, con2; 439 440 if (info->data->needs_adc_phy) 441 regmap_write(info->pmu_map, info->data->phy_offset, 1); 442 443 con1 = ADC_V2_CON1_SOFT_RESET; 444 writel(con1, ADC_V2_CON1(info->regs)); 445 446 con2 = readl(ADC_V2_CON2(info->regs)); 447 con2 &= ~ADC_V2_CON2_C_TIME(7); 448 con2 |= ADC_V2_CON2_C_TIME(0); 449 writel(con2, ADC_V2_CON2(info->regs)); 450 451 /* Enable interrupts */ 452 writel(1, ADC_V2_INT_EN(info->regs)); 453 } 454 455 static const struct exynos_adc_data exynos7_adc_data = { 456 .num_channels = MAX_ADC_V1_CHANNELS, 457 .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ 458 459 .init_hw = exynos_adc_exynos7_init_hw, 460 .exit_hw = exynos_adc_v2_exit_hw, 461 .clear_irq = exynos_adc_v2_clear_irq, 462 .start_conv = exynos_adc_v2_start_conv, 463 }; 464 465 static const struct of_device_id exynos_adc_match[] = { 466 { 467 .compatible = "samsung,s3c2410-adc", 468 .data = &exynos_adc_s3c24xx_data, 469 }, { 470 .compatible = "samsung,s3c2416-adc", 471 .data = &exynos_adc_s3c2416_data, 472 }, { 473 .compatible = "samsung,s3c2440-adc", 474 .data = &exynos_adc_s3c24xx_data, 475 }, { 476 .compatible = "samsung,s3c2443-adc", 477 .data = &exynos_adc_s3c2443_data, 478 }, { 479 .compatible = "samsung,s3c6410-adc", 480 .data = &exynos_adc_s3c64xx_data, 481 }, { 482 .compatible = "samsung,exynos-adc-v1", 483 .data = &exynos_adc_v1_data, 484 }, { 485 .compatible = "samsung,exynos-adc-v2", 486 .data = &exynos_adc_v2_data, 487 }, { 488 .compatible = "samsung,exynos3250-adc", 489 .data = &exynos3250_adc_data, 490 }, { 491 .compatible = "samsung,exynos7-adc", 492 .data = &exynos7_adc_data, 493 }, 494 {}, 495 }; 496 MODULE_DEVICE_TABLE(of, exynos_adc_match); 497 498 static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev) 499 { 500 const struct of_device_id *match; 501 502 match = of_match_node(exynos_adc_match, pdev->dev.of_node); 503 return (struct exynos_adc_data *)match->data; 504 } 505 506 static int exynos_read_raw(struct iio_dev *indio_dev, 507 struct iio_chan_spec const *chan, 508 int *val, 509 int *val2, 510 long mask) 511 { 512 struct exynos_adc *info = iio_priv(indio_dev); 513 unsigned long timeout; 514 int ret; 515 516 if (mask != IIO_CHAN_INFO_RAW) 517 return -EINVAL; 518 519 mutex_lock(&indio_dev->mlock); 520 reinit_completion(&info->completion); 521 522 /* Select the channel to be used and Trigger conversion */ 523 if (info->data->start_conv) 524 info->data->start_conv(info, chan->address); 525 526 timeout = wait_for_completion_timeout(&info->completion, 527 EXYNOS_ADC_TIMEOUT); 528 if (timeout == 0) { 529 dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); 530 if (info->data->init_hw) 531 info->data->init_hw(info); 532 ret = -ETIMEDOUT; 533 } else { 534 *val = info->value; 535 *val2 = 0; 536 ret = IIO_VAL_INT; 537 } 538 539 mutex_unlock(&indio_dev->mlock); 540 541 return ret; 542 } 543 544 static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y) 545 { 546 struct exynos_adc *info = iio_priv(indio_dev); 547 unsigned long timeout; 548 int ret; 549 550 mutex_lock(&indio_dev->mlock); 551 info->read_ts = true; 552 553 reinit_completion(&info->completion); 554 555 writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST, 556 ADC_V1_TSC(info->regs)); 557 558 /* Select the ts channel to be used and Trigger conversion */ 559 info->data->start_conv(info, ADC_S3C2410_MUX_TS); 560 561 timeout = wait_for_completion_timeout(&info->completion, 562 EXYNOS_ADC_TIMEOUT); 563 if (timeout == 0) { 564 dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n"); 565 if (info->data->init_hw) 566 info->data->init_hw(info); 567 ret = -ETIMEDOUT; 568 } else { 569 *x = info->ts_x; 570 *y = info->ts_y; 571 ret = 0; 572 } 573 574 info->read_ts = false; 575 mutex_unlock(&indio_dev->mlock); 576 577 return ret; 578 } 579 580 static irqreturn_t exynos_adc_isr(int irq, void *dev_id) 581 { 582 struct exynos_adc *info = (struct exynos_adc *)dev_id; 583 u32 mask = info->data->mask; 584 585 /* Read value */ 586 if (info->read_ts) { 587 info->ts_x = readl(ADC_V1_DATX(info->regs)); 588 info->ts_y = readl(ADC_V1_DATY(info->regs)); 589 writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs)); 590 } else { 591 info->value = readl(ADC_V1_DATX(info->regs)) & mask; 592 } 593 594 /* clear irq */ 595 if (info->data->clear_irq) 596 info->data->clear_irq(info); 597 598 complete(&info->completion); 599 600 return IRQ_HANDLED; 601 } 602 603 /* 604 * Here we (ab)use a threaded interrupt handler to stay running 605 * for as long as the touchscreen remains pressed, we report 606 * a new event with the latest data and then sleep until the 607 * next timer tick. This mirrors the behavior of the old 608 * driver, with much less code. 609 */ 610 static irqreturn_t exynos_ts_isr(int irq, void *dev_id) 611 { 612 struct exynos_adc *info = dev_id; 613 struct iio_dev *dev = dev_get_drvdata(info->dev); 614 u32 x, y; 615 bool pressed; 616 int ret; 617 618 while (info->input->users) { 619 ret = exynos_read_s3c64xx_ts(dev, &x, &y); 620 if (ret == -ETIMEDOUT) 621 break; 622 623 pressed = x & y & ADC_DATX_PRESSED; 624 if (!pressed) { 625 input_report_key(info->input, BTN_TOUCH, 0); 626 input_sync(info->input); 627 break; 628 } 629 630 input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK); 631 input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK); 632 input_report_key(info->input, BTN_TOUCH, 1); 633 input_sync(info->input); 634 635 msleep(1); 636 }; 637 638 writel(0, ADC_V1_CLRINTPNDNUP(info->regs)); 639 640 return IRQ_HANDLED; 641 } 642 643 static int exynos_adc_reg_access(struct iio_dev *indio_dev, 644 unsigned reg, unsigned writeval, 645 unsigned *readval) 646 { 647 struct exynos_adc *info = iio_priv(indio_dev); 648 649 if (readval == NULL) 650 return -EINVAL; 651 652 *readval = readl(info->regs + reg); 653 654 return 0; 655 } 656 657 static const struct iio_info exynos_adc_iio_info = { 658 .read_raw = &exynos_read_raw, 659 .debugfs_reg_access = &exynos_adc_reg_access, 660 .driver_module = THIS_MODULE, 661 }; 662 663 #define ADC_CHANNEL(_index, _id) { \ 664 .type = IIO_VOLTAGE, \ 665 .indexed = 1, \ 666 .channel = _index, \ 667 .address = _index, \ 668 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 669 .datasheet_name = _id, \ 670 } 671 672 static const struct iio_chan_spec exynos_adc_iio_channels[] = { 673 ADC_CHANNEL(0, "adc0"), 674 ADC_CHANNEL(1, "adc1"), 675 ADC_CHANNEL(2, "adc2"), 676 ADC_CHANNEL(3, "adc3"), 677 ADC_CHANNEL(4, "adc4"), 678 ADC_CHANNEL(5, "adc5"), 679 ADC_CHANNEL(6, "adc6"), 680 ADC_CHANNEL(7, "adc7"), 681 ADC_CHANNEL(8, "adc8"), 682 ADC_CHANNEL(9, "adc9"), 683 }; 684 685 static int exynos_adc_remove_devices(struct device *dev, void *c) 686 { 687 struct platform_device *pdev = to_platform_device(dev); 688 689 platform_device_unregister(pdev); 690 691 return 0; 692 } 693 694 static int exynos_adc_ts_open(struct input_dev *dev) 695 { 696 struct exynos_adc *info = input_get_drvdata(dev); 697 698 enable_irq(info->tsirq); 699 700 return 0; 701 } 702 703 static void exynos_adc_ts_close(struct input_dev *dev) 704 { 705 struct exynos_adc *info = input_get_drvdata(dev); 706 707 disable_irq(info->tsirq); 708 } 709 710 static int exynos_adc_ts_init(struct exynos_adc *info) 711 { 712 int ret; 713 714 if (info->tsirq <= 0) 715 return -ENODEV; 716 717 info->input = input_allocate_device(); 718 if (!info->input) 719 return -ENOMEM; 720 721 info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); 722 info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); 723 724 input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0); 725 input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0); 726 727 info->input->name = "S3C24xx TouchScreen"; 728 info->input->id.bustype = BUS_HOST; 729 info->input->open = exynos_adc_ts_open; 730 info->input->close = exynos_adc_ts_close; 731 732 input_set_drvdata(info->input, info); 733 734 ret = input_register_device(info->input); 735 if (ret) { 736 input_free_device(info->input); 737 return ret; 738 } 739 740 disable_irq(info->tsirq); 741 ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr, 742 IRQF_ONESHOT, "touchscreen", info); 743 if (ret) 744 input_unregister_device(info->input); 745 746 return ret; 747 } 748 749 static int exynos_adc_probe(struct platform_device *pdev) 750 { 751 struct exynos_adc *info = NULL; 752 struct device_node *np = pdev->dev.of_node; 753 struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev); 754 struct iio_dev *indio_dev = NULL; 755 struct resource *mem; 756 bool has_ts = false; 757 int ret = -ENODEV; 758 int irq; 759 760 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc)); 761 if (!indio_dev) { 762 dev_err(&pdev->dev, "failed allocating iio device\n"); 763 return -ENOMEM; 764 } 765 766 info = iio_priv(indio_dev); 767 768 info->data = exynos_adc_get_data(pdev); 769 if (!info->data) { 770 dev_err(&pdev->dev, "failed getting exynos_adc_data\n"); 771 return -EINVAL; 772 } 773 774 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 775 info->regs = devm_ioremap_resource(&pdev->dev, mem); 776 if (IS_ERR(info->regs)) 777 return PTR_ERR(info->regs); 778 779 780 if (info->data->needs_adc_phy) { 781 info->pmu_map = syscon_regmap_lookup_by_phandle( 782 pdev->dev.of_node, 783 "samsung,syscon-phandle"); 784 if (IS_ERR(info->pmu_map)) { 785 dev_err(&pdev->dev, "syscon regmap lookup failed.\n"); 786 return PTR_ERR(info->pmu_map); 787 } 788 } 789 790 irq = platform_get_irq(pdev, 0); 791 if (irq < 0) { 792 dev_err(&pdev->dev, "no irq resource?\n"); 793 return irq; 794 } 795 info->irq = irq; 796 797 irq = platform_get_irq(pdev, 1); 798 if (irq == -EPROBE_DEFER) 799 return irq; 800 801 info->tsirq = irq; 802 803 info->dev = &pdev->dev; 804 805 init_completion(&info->completion); 806 807 info->clk = devm_clk_get(&pdev->dev, "adc"); 808 if (IS_ERR(info->clk)) { 809 dev_err(&pdev->dev, "failed getting clock, err = %ld\n", 810 PTR_ERR(info->clk)); 811 return PTR_ERR(info->clk); 812 } 813 814 if (info->data->needs_sclk) { 815 info->sclk = devm_clk_get(&pdev->dev, "sclk"); 816 if (IS_ERR(info->sclk)) { 817 dev_err(&pdev->dev, 818 "failed getting sclk clock, err = %ld\n", 819 PTR_ERR(info->sclk)); 820 return PTR_ERR(info->sclk); 821 } 822 } 823 824 info->vdd = devm_regulator_get(&pdev->dev, "vdd"); 825 if (IS_ERR(info->vdd)) { 826 dev_err(&pdev->dev, "failed getting regulator, err = %ld\n", 827 PTR_ERR(info->vdd)); 828 return PTR_ERR(info->vdd); 829 } 830 831 ret = regulator_enable(info->vdd); 832 if (ret) 833 return ret; 834 835 ret = exynos_adc_prepare_clk(info); 836 if (ret) 837 goto err_disable_reg; 838 839 ret = exynos_adc_enable_clk(info); 840 if (ret) 841 goto err_unprepare_clk; 842 843 platform_set_drvdata(pdev, indio_dev); 844 845 indio_dev->name = dev_name(&pdev->dev); 846 indio_dev->dev.parent = &pdev->dev; 847 indio_dev->dev.of_node = pdev->dev.of_node; 848 indio_dev->info = &exynos_adc_iio_info; 849 indio_dev->modes = INDIO_DIRECT_MODE; 850 indio_dev->channels = exynos_adc_iio_channels; 851 indio_dev->num_channels = info->data->num_channels; 852 853 ret = request_irq(info->irq, exynos_adc_isr, 854 0, dev_name(&pdev->dev), info); 855 if (ret < 0) { 856 dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", 857 info->irq); 858 goto err_disable_clk; 859 } 860 861 ret = iio_device_register(indio_dev); 862 if (ret) 863 goto err_irq; 864 865 if (info->data->init_hw) 866 info->data->init_hw(info); 867 868 /* leave out any TS related code if unreachable */ 869 if (IS_REACHABLE(CONFIG_INPUT)) { 870 has_ts = of_property_read_bool(pdev->dev.of_node, 871 "has-touchscreen") || pdata; 872 } 873 874 if (pdata) 875 info->delay = pdata->delay; 876 else 877 info->delay = 10000; 878 879 if (has_ts) 880 ret = exynos_adc_ts_init(info); 881 if (ret) 882 goto err_iio; 883 884 ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev); 885 if (ret < 0) { 886 dev_err(&pdev->dev, "failed adding child nodes\n"); 887 goto err_of_populate; 888 } 889 890 return 0; 891 892 err_of_populate: 893 device_for_each_child(&indio_dev->dev, NULL, 894 exynos_adc_remove_devices); 895 if (has_ts) { 896 input_unregister_device(info->input); 897 free_irq(info->tsirq, info); 898 } 899 err_iio: 900 iio_device_unregister(indio_dev); 901 err_irq: 902 free_irq(info->irq, info); 903 err_disable_clk: 904 if (info->data->exit_hw) 905 info->data->exit_hw(info); 906 exynos_adc_disable_clk(info); 907 err_unprepare_clk: 908 exynos_adc_unprepare_clk(info); 909 err_disable_reg: 910 regulator_disable(info->vdd); 911 return ret; 912 } 913 914 static int exynos_adc_remove(struct platform_device *pdev) 915 { 916 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 917 struct exynos_adc *info = iio_priv(indio_dev); 918 919 if (IS_REACHABLE(CONFIG_INPUT)) { 920 free_irq(info->tsirq, info); 921 input_unregister_device(info->input); 922 } 923 device_for_each_child(&indio_dev->dev, NULL, 924 exynos_adc_remove_devices); 925 iio_device_unregister(indio_dev); 926 free_irq(info->irq, info); 927 if (info->data->exit_hw) 928 info->data->exit_hw(info); 929 exynos_adc_disable_clk(info); 930 exynos_adc_unprepare_clk(info); 931 regulator_disable(info->vdd); 932 933 return 0; 934 } 935 936 #ifdef CONFIG_PM_SLEEP 937 static int exynos_adc_suspend(struct device *dev) 938 { 939 struct iio_dev *indio_dev = dev_get_drvdata(dev); 940 struct exynos_adc *info = iio_priv(indio_dev); 941 942 if (info->data->exit_hw) 943 info->data->exit_hw(info); 944 exynos_adc_disable_clk(info); 945 regulator_disable(info->vdd); 946 947 return 0; 948 } 949 950 static int exynos_adc_resume(struct device *dev) 951 { 952 struct iio_dev *indio_dev = dev_get_drvdata(dev); 953 struct exynos_adc *info = iio_priv(indio_dev); 954 int ret; 955 956 ret = regulator_enable(info->vdd); 957 if (ret) 958 return ret; 959 960 ret = exynos_adc_enable_clk(info); 961 if (ret) 962 return ret; 963 964 if (info->data->init_hw) 965 info->data->init_hw(info); 966 967 return 0; 968 } 969 #endif 970 971 static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops, 972 exynos_adc_suspend, 973 exynos_adc_resume); 974 975 static struct platform_driver exynos_adc_driver = { 976 .probe = exynos_adc_probe, 977 .remove = exynos_adc_remove, 978 .driver = { 979 .name = "exynos-adc", 980 .of_match_table = exynos_adc_match, 981 .pm = &exynos_adc_pm_ops, 982 }, 983 }; 984 985 module_platform_driver(exynos_adc_driver); 986 987 MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>"); 988 MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver"); 989 MODULE_LICENSE("GPL v2"); 990