1 /* 2 * Driver for the ADC present in the Atmel AT91 evaluation boards. 3 * 4 * Copyright 2011 Free Electrons 5 * 6 * Licensed under the GPLv2 or later. 7 */ 8 9 #include <linux/bitmap.h> 10 #include <linux/bitops.h> 11 #include <linux/clk.h> 12 #include <linux/err.h> 13 #include <linux/io.h> 14 #include <linux/input.h> 15 #include <linux/interrupt.h> 16 #include <linux/jiffies.h> 17 #include <linux/kernel.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_device.h> 21 #include <linux/platform_device.h> 22 #include <linux/sched.h> 23 #include <linux/slab.h> 24 #include <linux/wait.h> 25 26 #include <linux/platform_data/at91_adc.h> 27 28 #include <linux/iio/iio.h> 29 #include <linux/iio/buffer.h> 30 #include <linux/iio/trigger.h> 31 #include <linux/iio/trigger_consumer.h> 32 #include <linux/iio/triggered_buffer.h> 33 #include <linux/pinctrl/consumer.h> 34 35 /* Registers */ 36 #define AT91_ADC_CR 0x00 /* Control Register */ 37 #define AT91_ADC_SWRST (1 << 0) /* Software Reset */ 38 #define AT91_ADC_START (1 << 1) /* Start Conversion */ 39 40 #define AT91_ADC_MR 0x04 /* Mode Register */ 41 #define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */ 42 #define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */ 43 #define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */ 44 #define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ 45 #define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ 46 #define AT91_ADC_TRGSEL_TC0 (0 << 1) 47 #define AT91_ADC_TRGSEL_TC1 (1 << 1) 48 #define AT91_ADC_TRGSEL_TC2 (2 << 1) 49 #define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) 50 #define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ 51 #define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ 52 #define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */ 53 #define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ 54 #define AT91_ADC_PRESCAL_9G45 (0xff << 8) 55 #define AT91_ADC_PRESCAL_(x) ((x) << 8) 56 #define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ 57 #define AT91_ADC_STARTUP_9G45 (0x7f << 16) 58 #define AT91_ADC_STARTUP_9X5 (0xf << 16) 59 #define AT91_ADC_STARTUP_(x) ((x) << 16) 60 #define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ 61 #define AT91_ADC_SHTIM_(x) ((x) << 24) 62 #define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */ 63 #define AT91_ADC_PENDBC_(x) ((x) << 28) 64 65 #define AT91_ADC_TSR 0x0C 66 #define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */ 67 #define AT91_ADC_TSR_SHTIM_(x) ((x) << 24) 68 69 #define AT91_ADC_CHER 0x10 /* Channel Enable Register */ 70 #define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ 71 #define AT91_ADC_CHSR 0x18 /* Channel Status Register */ 72 #define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ 73 74 #define AT91_ADC_SR 0x1C /* Status Register */ 75 #define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ 76 #define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ 77 #define AT91_ADC_DRDY (1 << 16) /* Data Ready */ 78 #define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ 79 #define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ 80 #define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ 81 82 #define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ 83 #define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ 84 85 #define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ 86 #define AT91_ADC_LDATA (0x3ff) 87 88 #define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ 89 #define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ 90 #define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ 91 #define AT91RL_ADC_IER_PEN (1 << 20) 92 #define AT91RL_ADC_IER_NOPEN (1 << 21) 93 #define AT91_ADC_IER_PEN (1 << 29) 94 #define AT91_ADC_IER_NOPEN (1 << 30) 95 #define AT91_ADC_IER_XRDY (1 << 20) 96 #define AT91_ADC_IER_YRDY (1 << 21) 97 #define AT91_ADC_IER_PRDY (1 << 22) 98 #define AT91_ADC_ISR_PENS (1 << 31) 99 100 #define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ 101 #define AT91_ADC_DATA (0x3ff) 102 103 #define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ 104 105 #define AT91_ADC_ACR 0x94 /* Analog Control Register */ 106 #define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ 107 108 #define AT91_ADC_TSMR 0xB0 109 #define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ 110 #define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) 111 #define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) 112 #define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) 113 #define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) 114 #define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ 115 #define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) 116 #define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ 117 #define AT91_ADC_TSMR_SCTIM_(x) ((x) << 16) 118 #define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ 119 #define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) 120 #define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ 121 #define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ 122 #define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ 123 124 #define AT91_ADC_TSXPOSR 0xB4 125 #define AT91_ADC_TSYPOSR 0xB8 126 #define AT91_ADC_TSPRESSR 0xBC 127 128 #define AT91_ADC_TRGR_9260 AT91_ADC_MR 129 #define AT91_ADC_TRGR_9G45 0x08 130 #define AT91_ADC_TRGR_9X5 0xC0 131 132 /* Trigger Register bit field */ 133 #define AT91_ADC_TRGR_TRGPER (0xffff << 16) 134 #define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) 135 #define AT91_ADC_TRGR_TRGMOD (0x7 << 0) 136 #define AT91_ADC_TRGR_NONE (0 << 0) 137 #define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) 138 139 #define AT91_ADC_CHAN(st, ch) \ 140 (st->registers->channel_base + (ch * 4)) 141 #define at91_adc_readl(st, reg) \ 142 (readl_relaxed(st->reg_base + reg)) 143 #define at91_adc_writel(st, reg, val) \ 144 (writel_relaxed(val, st->reg_base + reg)) 145 146 #define DRIVER_NAME "at91_adc" 147 #define MAX_POS_BITS 12 148 149 #define TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */ 150 #define TOUCH_PEN_DETECT_DEBOUNCE_US 200 151 152 #define MAX_RLPOS_BITS 10 153 #define TOUCH_SAMPLE_PERIOD_US_RL 10000 /* 10ms, the SoC can't keep up with 2ms */ 154 #define TOUCH_SHTIM 0xa 155 #define TOUCH_SCTIM_US 10 /* 10us for the Touchscreen Switches Closure Time */ 156 157 /** 158 * struct at91_adc_reg_desc - Various informations relative to registers 159 * @channel_base: Base offset for the channel data registers 160 * @drdy_mask: Mask of the DRDY field in the relevant registers 161 (Interruptions registers mostly) 162 * @status_register: Offset of the Interrupt Status Register 163 * @trigger_register: Offset of the Trigger setup register 164 * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register 165 * @mr_startup_mask: Mask of the STARTUP field in the adc MR register 166 */ 167 struct at91_adc_reg_desc { 168 u8 channel_base; 169 u32 drdy_mask; 170 u8 status_register; 171 u8 trigger_register; 172 u32 mr_prescal_mask; 173 u32 mr_startup_mask; 174 }; 175 176 struct at91_adc_caps { 177 bool has_ts; /* Support touch screen */ 178 bool has_tsmr; /* only at91sam9x5, sama5d3 have TSMR reg */ 179 /* 180 * Numbers of sampling data will be averaged. Can be 0~3. 181 * Hardware can average (2 ^ ts_filter_average) sample data. 182 */ 183 u8 ts_filter_average; 184 /* Pen Detection input pull-up resistor, can be 0~3 */ 185 u8 ts_pen_detect_sensitivity; 186 187 /* startup time calculate function */ 188 u32 (*calc_startup_ticks)(u32 startup_time, u32 adc_clk_khz); 189 190 u8 num_channels; 191 struct at91_adc_reg_desc registers; 192 }; 193 194 struct at91_adc_state { 195 struct clk *adc_clk; 196 u16 *buffer; 197 unsigned long channels_mask; 198 struct clk *clk; 199 bool done; 200 int irq; 201 u16 last_value; 202 int chnb; 203 struct mutex lock; 204 u8 num_channels; 205 void __iomem *reg_base; 206 struct at91_adc_reg_desc *registers; 207 u32 startup_time; 208 u8 sample_hold_time; 209 bool sleep_mode; 210 struct iio_trigger **trig; 211 struct at91_adc_trigger *trigger_list; 212 u32 trigger_number; 213 bool use_external; 214 u32 vref_mv; 215 u32 res; /* resolution used for convertions */ 216 bool low_res; /* the resolution corresponds to the lowest one */ 217 wait_queue_head_t wq_data_avail; 218 struct at91_adc_caps *caps; 219 220 /* 221 * Following ADC channels are shared by touchscreen: 222 * 223 * CH0 -- Touch screen XP/UL 224 * CH1 -- Touch screen XM/UR 225 * CH2 -- Touch screen YP/LL 226 * CH3 -- Touch screen YM/Sense 227 * CH4 -- Touch screen LR(5-wire only) 228 * 229 * The bitfields below represents the reserved channel in the 230 * touchscreen mode. 231 */ 232 #define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 0) 233 #define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 0) 234 enum atmel_adc_ts_type touchscreen_type; 235 struct input_dev *ts_input; 236 237 u16 ts_sample_period_val; 238 u32 ts_pressure_threshold; 239 u16 ts_pendbc; 240 241 bool ts_bufferedmeasure; 242 u32 ts_prev_absx; 243 u32 ts_prev_absy; 244 }; 245 246 static irqreturn_t at91_adc_trigger_handler(int irq, void *p) 247 { 248 struct iio_poll_func *pf = p; 249 struct iio_dev *idev = pf->indio_dev; 250 struct at91_adc_state *st = iio_priv(idev); 251 int i, j = 0; 252 253 for (i = 0; i < idev->masklength; i++) { 254 if (!test_bit(i, idev->active_scan_mask)) 255 continue; 256 st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i)); 257 j++; 258 } 259 260 iio_push_to_buffers_with_timestamp(idev, st->buffer, pf->timestamp); 261 262 iio_trigger_notify_done(idev->trig); 263 264 /* Needed to ACK the DRDY interruption */ 265 at91_adc_readl(st, AT91_ADC_LCDR); 266 267 enable_irq(st->irq); 268 269 return IRQ_HANDLED; 270 } 271 272 /* Handler for classic adc channel eoc trigger */ 273 static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev) 274 { 275 struct at91_adc_state *st = iio_priv(idev); 276 277 if (iio_buffer_enabled(idev)) { 278 disable_irq_nosync(irq); 279 iio_trigger_poll(idev->trig); 280 } else { 281 st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb)); 282 st->done = true; 283 wake_up_interruptible(&st->wq_data_avail); 284 } 285 } 286 287 static int at91_ts_sample(struct at91_adc_state *st) 288 { 289 unsigned int xscale, yscale, reg, z1, z2; 290 unsigned int x, y, pres, xpos, ypos; 291 unsigned int rxp = 1; 292 unsigned int factor = 1000; 293 struct iio_dev *idev = iio_priv_to_dev(st); 294 295 unsigned int xyz_mask_bits = st->res; 296 unsigned int xyz_mask = (1 << xyz_mask_bits) - 1; 297 298 /* calculate position */ 299 /* x position = (x / xscale) * max, max = 2^MAX_POS_BITS - 1 */ 300 reg = at91_adc_readl(st, AT91_ADC_TSXPOSR); 301 xpos = reg & xyz_mask; 302 x = (xpos << MAX_POS_BITS) - xpos; 303 xscale = (reg >> 16) & xyz_mask; 304 if (xscale == 0) { 305 dev_err(&idev->dev, "Error: xscale == 0!\n"); 306 return -1; 307 } 308 x /= xscale; 309 310 /* y position = (y / yscale) * max, max = 2^MAX_POS_BITS - 1 */ 311 reg = at91_adc_readl(st, AT91_ADC_TSYPOSR); 312 ypos = reg & xyz_mask; 313 y = (ypos << MAX_POS_BITS) - ypos; 314 yscale = (reg >> 16) & xyz_mask; 315 if (yscale == 0) { 316 dev_err(&idev->dev, "Error: yscale == 0!\n"); 317 return -1; 318 } 319 y /= yscale; 320 321 /* calculate the pressure */ 322 reg = at91_adc_readl(st, AT91_ADC_TSPRESSR); 323 z1 = reg & xyz_mask; 324 z2 = (reg >> 16) & xyz_mask; 325 326 if (z1 != 0) 327 pres = rxp * (x * factor / 1024) * (z2 * factor / z1 - factor) 328 / factor; 329 else 330 pres = st->ts_pressure_threshold; /* no pen contacted */ 331 332 dev_dbg(&idev->dev, "xpos = %d, xscale = %d, ypos = %d, yscale = %d, z1 = %d, z2 = %d, press = %d\n", 333 xpos, xscale, ypos, yscale, z1, z2, pres); 334 335 if (pres < st->ts_pressure_threshold) { 336 dev_dbg(&idev->dev, "x = %d, y = %d, pressure = %d\n", 337 x, y, pres / factor); 338 input_report_abs(st->ts_input, ABS_X, x); 339 input_report_abs(st->ts_input, ABS_Y, y); 340 input_report_abs(st->ts_input, ABS_PRESSURE, pres); 341 input_report_key(st->ts_input, BTN_TOUCH, 1); 342 input_sync(st->ts_input); 343 } else { 344 dev_dbg(&idev->dev, "pressure too low: not reporting\n"); 345 } 346 347 return 0; 348 } 349 350 static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) 351 { 352 struct iio_dev *idev = private; 353 struct at91_adc_state *st = iio_priv(idev); 354 u32 status = at91_adc_readl(st, st->registers->status_register); 355 unsigned int reg; 356 357 status &= at91_adc_readl(st, AT91_ADC_IMR); 358 if (status & GENMASK(st->num_channels - 1, 0)) 359 handle_adc_eoc_trigger(irq, idev); 360 361 if (status & AT91RL_ADC_IER_PEN) { 362 /* Disabling pen debounce is required to get a NOPEN irq */ 363 reg = at91_adc_readl(st, AT91_ADC_MR); 364 reg &= ~AT91_ADC_PENDBC; 365 at91_adc_writel(st, AT91_ADC_MR, reg); 366 367 at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN); 368 at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_NOPEN 369 | AT91_ADC_EOC(3)); 370 /* Set up period trigger for sampling */ 371 at91_adc_writel(st, st->registers->trigger_register, 372 AT91_ADC_TRGR_MOD_PERIOD_TRIG | 373 AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val)); 374 } else if (status & AT91RL_ADC_IER_NOPEN) { 375 reg = at91_adc_readl(st, AT91_ADC_MR); 376 reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC; 377 at91_adc_writel(st, AT91_ADC_MR, reg); 378 at91_adc_writel(st, st->registers->trigger_register, 379 AT91_ADC_TRGR_NONE); 380 381 at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_NOPEN 382 | AT91_ADC_EOC(3)); 383 at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN); 384 st->ts_bufferedmeasure = false; 385 input_report_key(st->ts_input, BTN_TOUCH, 0); 386 input_sync(st->ts_input); 387 } else if (status & AT91_ADC_EOC(3) && st->ts_input) { 388 /* Conversion finished and we've a touchscreen */ 389 if (st->ts_bufferedmeasure) { 390 /* 391 * Last measurement is always discarded, since it can 392 * be erroneous. 393 * Always report previous measurement 394 */ 395 input_report_abs(st->ts_input, ABS_X, st->ts_prev_absx); 396 input_report_abs(st->ts_input, ABS_Y, st->ts_prev_absy); 397 input_report_key(st->ts_input, BTN_TOUCH, 1); 398 input_sync(st->ts_input); 399 } else 400 st->ts_bufferedmeasure = true; 401 402 /* Now make new measurement */ 403 st->ts_prev_absx = at91_adc_readl(st, AT91_ADC_CHAN(st, 3)) 404 << MAX_RLPOS_BITS; 405 st->ts_prev_absx /= at91_adc_readl(st, AT91_ADC_CHAN(st, 2)); 406 407 st->ts_prev_absy = at91_adc_readl(st, AT91_ADC_CHAN(st, 1)) 408 << MAX_RLPOS_BITS; 409 st->ts_prev_absy /= at91_adc_readl(st, AT91_ADC_CHAN(st, 0)); 410 } 411 412 return IRQ_HANDLED; 413 } 414 415 static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private) 416 { 417 struct iio_dev *idev = private; 418 struct at91_adc_state *st = iio_priv(idev); 419 u32 status = at91_adc_readl(st, st->registers->status_register); 420 const uint32_t ts_data_irq_mask = 421 AT91_ADC_IER_XRDY | 422 AT91_ADC_IER_YRDY | 423 AT91_ADC_IER_PRDY; 424 425 if (status & GENMASK(st->num_channels - 1, 0)) 426 handle_adc_eoc_trigger(irq, idev); 427 428 if (status & AT91_ADC_IER_PEN) { 429 at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN); 430 at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_NOPEN | 431 ts_data_irq_mask); 432 /* Set up period trigger for sampling */ 433 at91_adc_writel(st, st->registers->trigger_register, 434 AT91_ADC_TRGR_MOD_PERIOD_TRIG | 435 AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val)); 436 } else if (status & AT91_ADC_IER_NOPEN) { 437 at91_adc_writel(st, st->registers->trigger_register, 0); 438 at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_NOPEN | 439 ts_data_irq_mask); 440 at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN); 441 442 input_report_key(st->ts_input, BTN_TOUCH, 0); 443 input_sync(st->ts_input); 444 } else if ((status & ts_data_irq_mask) == ts_data_irq_mask) { 445 /* Now all touchscreen data is ready */ 446 447 if (status & AT91_ADC_ISR_PENS) { 448 /* validate data by pen contact */ 449 at91_ts_sample(st); 450 } else { 451 /* triggered by event that is no pen contact, just read 452 * them to clean the interrupt and discard all. 453 */ 454 at91_adc_readl(st, AT91_ADC_TSXPOSR); 455 at91_adc_readl(st, AT91_ADC_TSYPOSR); 456 at91_adc_readl(st, AT91_ADC_TSPRESSR); 457 } 458 } 459 460 return IRQ_HANDLED; 461 } 462 463 static int at91_adc_channel_init(struct iio_dev *idev) 464 { 465 struct at91_adc_state *st = iio_priv(idev); 466 struct iio_chan_spec *chan_array, *timestamp; 467 int bit, idx = 0; 468 unsigned long rsvd_mask = 0; 469 470 /* If touchscreen is enable, then reserve the adc channels */ 471 if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE) 472 rsvd_mask = CHAN_MASK_TOUCHSCREEN_4WIRE; 473 else if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_5WIRE) 474 rsvd_mask = CHAN_MASK_TOUCHSCREEN_5WIRE; 475 476 /* set up the channel mask to reserve touchscreen channels */ 477 st->channels_mask &= ~rsvd_mask; 478 479 idev->num_channels = bitmap_weight(&st->channels_mask, 480 st->num_channels) + 1; 481 482 chan_array = devm_kzalloc(&idev->dev, 483 ((idev->num_channels + 1) * 484 sizeof(struct iio_chan_spec)), 485 GFP_KERNEL); 486 487 if (!chan_array) 488 return -ENOMEM; 489 490 for_each_set_bit(bit, &st->channels_mask, st->num_channels) { 491 struct iio_chan_spec *chan = chan_array + idx; 492 493 chan->type = IIO_VOLTAGE; 494 chan->indexed = 1; 495 chan->channel = bit; 496 chan->scan_index = idx; 497 chan->scan_type.sign = 'u'; 498 chan->scan_type.realbits = st->res; 499 chan->scan_type.storagebits = 16; 500 chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); 501 chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); 502 idx++; 503 } 504 timestamp = chan_array + idx; 505 506 timestamp->type = IIO_TIMESTAMP; 507 timestamp->channel = -1; 508 timestamp->scan_index = idx; 509 timestamp->scan_type.sign = 's'; 510 timestamp->scan_type.realbits = 64; 511 timestamp->scan_type.storagebits = 64; 512 513 idev->channels = chan_array; 514 return idev->num_channels; 515 } 516 517 static int at91_adc_get_trigger_value_by_name(struct iio_dev *idev, 518 struct at91_adc_trigger *triggers, 519 const char *trigger_name) 520 { 521 struct at91_adc_state *st = iio_priv(idev); 522 int i; 523 524 for (i = 0; i < st->trigger_number; i++) { 525 char *name = kasprintf(GFP_KERNEL, 526 "%s-dev%d-%s", 527 idev->name, 528 idev->id, 529 triggers[i].name); 530 if (!name) 531 return -ENOMEM; 532 533 if (strcmp(trigger_name, name) == 0) { 534 kfree(name); 535 if (triggers[i].value == 0) 536 return -EINVAL; 537 return triggers[i].value; 538 } 539 540 kfree(name); 541 } 542 543 return -EINVAL; 544 } 545 546 static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) 547 { 548 struct iio_dev *idev = iio_trigger_get_drvdata(trig); 549 struct at91_adc_state *st = iio_priv(idev); 550 struct at91_adc_reg_desc *reg = st->registers; 551 u32 status = at91_adc_readl(st, reg->trigger_register); 552 int value; 553 u8 bit; 554 555 value = at91_adc_get_trigger_value_by_name(idev, 556 st->trigger_list, 557 idev->trig->name); 558 if (value < 0) 559 return value; 560 561 if (state) { 562 st->buffer = kmalloc(idev->scan_bytes, GFP_KERNEL); 563 if (st->buffer == NULL) 564 return -ENOMEM; 565 566 at91_adc_writel(st, reg->trigger_register, 567 status | value); 568 569 for_each_set_bit(bit, idev->active_scan_mask, 570 st->num_channels) { 571 struct iio_chan_spec const *chan = idev->channels + bit; 572 at91_adc_writel(st, AT91_ADC_CHER, 573 AT91_ADC_CH(chan->channel)); 574 } 575 576 at91_adc_writel(st, AT91_ADC_IER, reg->drdy_mask); 577 578 } else { 579 at91_adc_writel(st, AT91_ADC_IDR, reg->drdy_mask); 580 581 at91_adc_writel(st, reg->trigger_register, 582 status & ~value); 583 584 for_each_set_bit(bit, idev->active_scan_mask, 585 st->num_channels) { 586 struct iio_chan_spec const *chan = idev->channels + bit; 587 at91_adc_writel(st, AT91_ADC_CHDR, 588 AT91_ADC_CH(chan->channel)); 589 } 590 kfree(st->buffer); 591 } 592 593 return 0; 594 } 595 596 static const struct iio_trigger_ops at91_adc_trigger_ops = { 597 .owner = THIS_MODULE, 598 .set_trigger_state = &at91_adc_configure_trigger, 599 }; 600 601 static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *idev, 602 struct at91_adc_trigger *trigger) 603 { 604 struct iio_trigger *trig; 605 int ret; 606 607 trig = iio_trigger_alloc("%s-dev%d-%s", idev->name, 608 idev->id, trigger->name); 609 if (trig == NULL) 610 return NULL; 611 612 trig->dev.parent = idev->dev.parent; 613 iio_trigger_set_drvdata(trig, idev); 614 trig->ops = &at91_adc_trigger_ops; 615 616 ret = iio_trigger_register(trig); 617 if (ret) 618 return NULL; 619 620 return trig; 621 } 622 623 static int at91_adc_trigger_init(struct iio_dev *idev) 624 { 625 struct at91_adc_state *st = iio_priv(idev); 626 int i, ret; 627 628 st->trig = devm_kzalloc(&idev->dev, 629 st->trigger_number * sizeof(*st->trig), 630 GFP_KERNEL); 631 632 if (st->trig == NULL) { 633 ret = -ENOMEM; 634 goto error_ret; 635 } 636 637 for (i = 0; i < st->trigger_number; i++) { 638 if (st->trigger_list[i].is_external && !(st->use_external)) 639 continue; 640 641 st->trig[i] = at91_adc_allocate_trigger(idev, 642 st->trigger_list + i); 643 if (st->trig[i] == NULL) { 644 dev_err(&idev->dev, 645 "Could not allocate trigger %d\n", i); 646 ret = -ENOMEM; 647 goto error_trigger; 648 } 649 } 650 651 return 0; 652 653 error_trigger: 654 for (i--; i >= 0; i--) { 655 iio_trigger_unregister(st->trig[i]); 656 iio_trigger_free(st->trig[i]); 657 } 658 error_ret: 659 return ret; 660 } 661 662 static void at91_adc_trigger_remove(struct iio_dev *idev) 663 { 664 struct at91_adc_state *st = iio_priv(idev); 665 int i; 666 667 for (i = 0; i < st->trigger_number; i++) { 668 iio_trigger_unregister(st->trig[i]); 669 iio_trigger_free(st->trig[i]); 670 } 671 } 672 673 static int at91_adc_buffer_init(struct iio_dev *idev) 674 { 675 return iio_triggered_buffer_setup(idev, &iio_pollfunc_store_time, 676 &at91_adc_trigger_handler, NULL); 677 } 678 679 static void at91_adc_buffer_remove(struct iio_dev *idev) 680 { 681 iio_triggered_buffer_cleanup(idev); 682 } 683 684 static int at91_adc_read_raw(struct iio_dev *idev, 685 struct iio_chan_spec const *chan, 686 int *val, int *val2, long mask) 687 { 688 struct at91_adc_state *st = iio_priv(idev); 689 int ret; 690 691 switch (mask) { 692 case IIO_CHAN_INFO_RAW: 693 mutex_lock(&st->lock); 694 695 st->chnb = chan->channel; 696 at91_adc_writel(st, AT91_ADC_CHER, 697 AT91_ADC_CH(chan->channel)); 698 at91_adc_writel(st, AT91_ADC_IER, BIT(chan->channel)); 699 at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START); 700 701 ret = wait_event_interruptible_timeout(st->wq_data_avail, 702 st->done, 703 msecs_to_jiffies(1000)); 704 if (ret == 0) 705 ret = -ETIMEDOUT; 706 if (ret < 0) { 707 mutex_unlock(&st->lock); 708 return ret; 709 } 710 711 *val = st->last_value; 712 713 at91_adc_writel(st, AT91_ADC_CHDR, 714 AT91_ADC_CH(chan->channel)); 715 at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel)); 716 717 st->last_value = 0; 718 st->done = false; 719 mutex_unlock(&st->lock); 720 return IIO_VAL_INT; 721 722 case IIO_CHAN_INFO_SCALE: 723 *val = st->vref_mv; 724 *val2 = chan->scan_type.realbits; 725 return IIO_VAL_FRACTIONAL_LOG2; 726 default: 727 break; 728 } 729 return -EINVAL; 730 } 731 732 static int at91_adc_of_get_resolution(struct at91_adc_state *st, 733 struct platform_device *pdev) 734 { 735 struct iio_dev *idev = iio_priv_to_dev(st); 736 struct device_node *np = pdev->dev.of_node; 737 int count, i, ret = 0; 738 char *res_name, *s; 739 u32 *resolutions; 740 741 count = of_property_count_strings(np, "atmel,adc-res-names"); 742 if (count < 2) { 743 dev_err(&idev->dev, "You must specified at least two resolution names for " 744 "adc-res-names property in the DT\n"); 745 return count; 746 } 747 748 resolutions = kmalloc_array(count, sizeof(*resolutions), GFP_KERNEL); 749 if (!resolutions) 750 return -ENOMEM; 751 752 if (of_property_read_u32_array(np, "atmel,adc-res", resolutions, count)) { 753 dev_err(&idev->dev, "Missing adc-res property in the DT.\n"); 754 ret = -ENODEV; 755 goto ret; 756 } 757 758 if (of_property_read_string(np, "atmel,adc-use-res", (const char **)&res_name)) 759 res_name = "highres"; 760 761 for (i = 0; i < count; i++) { 762 if (of_property_read_string_index(np, "atmel,adc-res-names", i, (const char **)&s)) 763 continue; 764 765 if (strcmp(res_name, s)) 766 continue; 767 768 st->res = resolutions[i]; 769 if (!strcmp(res_name, "lowres")) 770 st->low_res = true; 771 else 772 st->low_res = false; 773 774 dev_info(&idev->dev, "Resolution used: %u bits\n", st->res); 775 goto ret; 776 } 777 778 dev_err(&idev->dev, "There is no resolution for %s\n", res_name); 779 780 ret: 781 kfree(resolutions); 782 return ret; 783 } 784 785 static u32 calc_startup_ticks_9260(u32 startup_time, u32 adc_clk_khz) 786 { 787 /* 788 * Number of ticks needed to cover the startup time of the ADC 789 * as defined in the electrical characteristics of the board, 790 * divided by 8. The formula thus is : 791 * Startup Time = (ticks + 1) * 8 / ADC Clock 792 */ 793 return round_up((startup_time * adc_clk_khz / 1000) - 1, 8) / 8; 794 } 795 796 static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz) 797 { 798 /* 799 * For sama5d3x and at91sam9x5, the formula changes to: 800 * Startup Time = <lookup_table_value> / ADC Clock 801 */ 802 const int startup_lookup[] = { 803 0, 8, 16, 24, 804 64, 80, 96, 112, 805 512, 576, 640, 704, 806 768, 832, 896, 960 807 }; 808 int i, size = ARRAY_SIZE(startup_lookup); 809 unsigned int ticks; 810 811 ticks = startup_time * adc_clk_khz / 1000; 812 for (i = 0; i < size; i++) 813 if (ticks < startup_lookup[i]) 814 break; 815 816 ticks = i; 817 if (ticks == size) 818 /* Reach the end of lookup table */ 819 ticks = size - 1; 820 821 return ticks; 822 } 823 824 static const struct of_device_id at91_adc_dt_ids[]; 825 826 static int at91_adc_probe_dt_ts(struct device_node *node, 827 struct at91_adc_state *st, struct device *dev) 828 { 829 int ret; 830 u32 prop; 831 832 ret = of_property_read_u32(node, "atmel,adc-ts-wires", &prop); 833 if (ret) { 834 dev_info(dev, "ADC Touch screen is disabled.\n"); 835 return 0; 836 } 837 838 switch (prop) { 839 case 4: 840 case 5: 841 st->touchscreen_type = prop; 842 break; 843 default: 844 dev_err(dev, "Unsupported number of touchscreen wires (%d). Should be 4 or 5.\n", prop); 845 return -EINVAL; 846 } 847 848 if (!st->caps->has_tsmr) 849 return 0; 850 prop = 0; 851 of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop); 852 st->ts_pressure_threshold = prop; 853 if (st->ts_pressure_threshold) { 854 return 0; 855 } else { 856 dev_err(dev, "Invalid pressure threshold for the touchscreen\n"); 857 return -EINVAL; 858 } 859 } 860 861 static int at91_adc_probe_dt(struct at91_adc_state *st, 862 struct platform_device *pdev) 863 { 864 struct iio_dev *idev = iio_priv_to_dev(st); 865 struct device_node *node = pdev->dev.of_node; 866 struct device_node *trig_node; 867 int i = 0, ret; 868 u32 prop; 869 870 if (!node) 871 return -EINVAL; 872 873 st->caps = (struct at91_adc_caps *) 874 of_match_device(at91_adc_dt_ids, &pdev->dev)->data; 875 876 st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers"); 877 878 if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) { 879 dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n"); 880 ret = -EINVAL; 881 goto error_ret; 882 } 883 st->channels_mask = prop; 884 885 st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode"); 886 887 if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) { 888 dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n"); 889 ret = -EINVAL; 890 goto error_ret; 891 } 892 st->startup_time = prop; 893 894 prop = 0; 895 of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop); 896 st->sample_hold_time = prop; 897 898 if (of_property_read_u32(node, "atmel,adc-vref", &prop)) { 899 dev_err(&idev->dev, "Missing adc-vref property in the DT.\n"); 900 ret = -EINVAL; 901 goto error_ret; 902 } 903 st->vref_mv = prop; 904 905 ret = at91_adc_of_get_resolution(st, pdev); 906 if (ret) 907 goto error_ret; 908 909 st->registers = &st->caps->registers; 910 st->num_channels = st->caps->num_channels; 911 st->trigger_number = of_get_child_count(node); 912 st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number * 913 sizeof(struct at91_adc_trigger), 914 GFP_KERNEL); 915 if (!st->trigger_list) { 916 dev_err(&idev->dev, "Could not allocate trigger list memory.\n"); 917 ret = -ENOMEM; 918 goto error_ret; 919 } 920 921 for_each_child_of_node(node, trig_node) { 922 struct at91_adc_trigger *trig = st->trigger_list + i; 923 const char *name; 924 925 if (of_property_read_string(trig_node, "trigger-name", &name)) { 926 dev_err(&idev->dev, "Missing trigger-name property in the DT.\n"); 927 ret = -EINVAL; 928 goto error_ret; 929 } 930 trig->name = name; 931 932 if (of_property_read_u32(trig_node, "trigger-value", &prop)) { 933 dev_err(&idev->dev, "Missing trigger-value property in the DT.\n"); 934 ret = -EINVAL; 935 goto error_ret; 936 } 937 trig->value = prop; 938 trig->is_external = of_property_read_bool(trig_node, "trigger-external"); 939 i++; 940 } 941 942 /* Check if touchscreen is supported. */ 943 if (st->caps->has_ts) 944 return at91_adc_probe_dt_ts(node, st, &idev->dev); 945 else 946 dev_info(&idev->dev, "not support touchscreen in the adc compatible string.\n"); 947 948 return 0; 949 950 error_ret: 951 return ret; 952 } 953 954 static int at91_adc_probe_pdata(struct at91_adc_state *st, 955 struct platform_device *pdev) 956 { 957 struct at91_adc_data *pdata = pdev->dev.platform_data; 958 959 if (!pdata) 960 return -EINVAL; 961 962 st->caps = (struct at91_adc_caps *) 963 platform_get_device_id(pdev)->driver_data; 964 965 st->use_external = pdata->use_external_triggers; 966 st->vref_mv = pdata->vref; 967 st->channels_mask = pdata->channels_used; 968 st->num_channels = st->caps->num_channels; 969 st->startup_time = pdata->startup_time; 970 st->trigger_number = pdata->trigger_number; 971 st->trigger_list = pdata->trigger_list; 972 st->registers = &st->caps->registers; 973 st->touchscreen_type = pdata->touchscreen_type; 974 975 return 0; 976 } 977 978 static const struct iio_info at91_adc_info = { 979 .driver_module = THIS_MODULE, 980 .read_raw = &at91_adc_read_raw, 981 }; 982 983 /* Touchscreen related functions */ 984 static int atmel_ts_open(struct input_dev *dev) 985 { 986 struct at91_adc_state *st = input_get_drvdata(dev); 987 988 if (st->caps->has_tsmr) 989 at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN); 990 else 991 at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN); 992 return 0; 993 } 994 995 static void atmel_ts_close(struct input_dev *dev) 996 { 997 struct at91_adc_state *st = input_get_drvdata(dev); 998 999 if (st->caps->has_tsmr) 1000 at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN); 1001 else 1002 at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN); 1003 } 1004 1005 static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz) 1006 { 1007 struct iio_dev *idev = iio_priv_to_dev(st); 1008 u32 reg = 0; 1009 u32 tssctim = 0; 1010 int i = 0; 1011 1012 /* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid 1013 * pen detect noise. 1014 * The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock 1015 */ 1016 st->ts_pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1017 1000, 1); 1018 1019 while (st->ts_pendbc >> ++i) 1020 ; /* Empty! Find the shift offset */ 1021 if (abs(st->ts_pendbc - (1 << i)) < abs(st->ts_pendbc - (1 << (i - 1)))) 1022 st->ts_pendbc = i; 1023 else 1024 st->ts_pendbc = i - 1; 1025 1026 if (!st->caps->has_tsmr) { 1027 reg = at91_adc_readl(st, AT91_ADC_MR); 1028 reg |= AT91_ADC_TSAMOD_TS_ONLY_MODE | AT91_ADC_PENDET; 1029 1030 reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC; 1031 at91_adc_writel(st, AT91_ADC_MR, reg); 1032 1033 reg = AT91_ADC_TSR_SHTIM_(TOUCH_SHTIM) & AT91_ADC_TSR_SHTIM; 1034 at91_adc_writel(st, AT91_ADC_TSR, reg); 1035 1036 st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US_RL * 1037 adc_clk_khz / 1000) - 1, 1); 1038 1039 return 0; 1040 } 1041 1042 /* Touchscreen Switches Closure time needed for allowing the value to 1043 * stabilize. 1044 * Switch Closure Time = (TSSCTIM * 4) ADCClock periods 1045 */ 1046 tssctim = DIV_ROUND_UP(TOUCH_SCTIM_US * adc_clk_khz / 1000, 4); 1047 dev_dbg(&idev->dev, "adc_clk at: %d KHz, tssctim at: %d\n", 1048 adc_clk_khz, tssctim); 1049 1050 if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE) 1051 reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS; 1052 else 1053 reg = AT91_ADC_TSMR_TSMODE_5WIRE; 1054 1055 reg |= AT91_ADC_TSMR_SCTIM_(tssctim) & AT91_ADC_TSMR_SCTIM; 1056 reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average) 1057 & AT91_ADC_TSMR_TSAV; 1058 reg |= AT91_ADC_TSMR_PENDBC_(st->ts_pendbc) & AT91_ADC_TSMR_PENDBC; 1059 reg |= AT91_ADC_TSMR_NOTSDMA; 1060 reg |= AT91_ADC_TSMR_PENDET_ENA; 1061 reg |= 0x03 << 8; /* TSFREQ, needs to be bigger than TSAV */ 1062 1063 at91_adc_writel(st, AT91_ADC_TSMR, reg); 1064 1065 /* Change adc internal resistor value for better pen detection, 1066 * default value is 100 kOhm. 1067 * 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm 1068 * option only available on ES2 and higher 1069 */ 1070 at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity 1071 & AT91_ADC_ACR_PENDETSENS); 1072 1073 /* Sample Period Time = (TRGPER + 1) / ADCClock */ 1074 st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US * 1075 adc_clk_khz / 1000) - 1, 1); 1076 1077 return 0; 1078 } 1079 1080 static int at91_ts_register(struct at91_adc_state *st, 1081 struct platform_device *pdev) 1082 { 1083 struct input_dev *input; 1084 struct iio_dev *idev = iio_priv_to_dev(st); 1085 int ret; 1086 1087 input = input_allocate_device(); 1088 if (!input) { 1089 dev_err(&idev->dev, "Failed to allocate TS device!\n"); 1090 return -ENOMEM; 1091 } 1092 1093 input->name = DRIVER_NAME; 1094 input->id.bustype = BUS_HOST; 1095 input->dev.parent = &pdev->dev; 1096 input->open = atmel_ts_open; 1097 input->close = atmel_ts_close; 1098 1099 __set_bit(EV_ABS, input->evbit); 1100 __set_bit(EV_KEY, input->evbit); 1101 __set_bit(BTN_TOUCH, input->keybit); 1102 if (st->caps->has_tsmr) { 1103 input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 1104 0, 0); 1105 input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 1106 0, 0); 1107 input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0); 1108 } else { 1109 if (st->touchscreen_type != ATMEL_ADC_TOUCHSCREEN_4WIRE) { 1110 dev_err(&pdev->dev, 1111 "This touchscreen controller only support 4 wires\n"); 1112 ret = -EINVAL; 1113 goto err; 1114 } 1115 1116 input_set_abs_params(input, ABS_X, 0, (1 << MAX_RLPOS_BITS) - 1, 1117 0, 0); 1118 input_set_abs_params(input, ABS_Y, 0, (1 << MAX_RLPOS_BITS) - 1, 1119 0, 0); 1120 } 1121 1122 st->ts_input = input; 1123 input_set_drvdata(input, st); 1124 1125 ret = input_register_device(input); 1126 if (ret) 1127 goto err; 1128 1129 return ret; 1130 1131 err: 1132 input_free_device(st->ts_input); 1133 return ret; 1134 } 1135 1136 static void at91_ts_unregister(struct at91_adc_state *st) 1137 { 1138 input_unregister_device(st->ts_input); 1139 } 1140 1141 static int at91_adc_probe(struct platform_device *pdev) 1142 { 1143 unsigned int prsc, mstrclk, ticks, adc_clk, adc_clk_khz, shtim; 1144 int ret; 1145 struct iio_dev *idev; 1146 struct at91_adc_state *st; 1147 struct resource *res; 1148 u32 reg; 1149 1150 idev = devm_iio_device_alloc(&pdev->dev, sizeof(struct at91_adc_state)); 1151 if (!idev) 1152 return -ENOMEM; 1153 1154 st = iio_priv(idev); 1155 1156 if (pdev->dev.of_node) 1157 ret = at91_adc_probe_dt(st, pdev); 1158 else 1159 ret = at91_adc_probe_pdata(st, pdev); 1160 1161 if (ret) { 1162 dev_err(&pdev->dev, "No platform data available.\n"); 1163 return -EINVAL; 1164 } 1165 1166 platform_set_drvdata(pdev, idev); 1167 1168 idev->dev.parent = &pdev->dev; 1169 idev->name = dev_name(&pdev->dev); 1170 idev->modes = INDIO_DIRECT_MODE; 1171 idev->info = &at91_adc_info; 1172 1173 st->irq = platform_get_irq(pdev, 0); 1174 if (st->irq < 0) { 1175 dev_err(&pdev->dev, "No IRQ ID is designated\n"); 1176 return -ENODEV; 1177 } 1178 1179 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1180 1181 st->reg_base = devm_ioremap_resource(&pdev->dev, res); 1182 if (IS_ERR(st->reg_base)) { 1183 return PTR_ERR(st->reg_base); 1184 } 1185 1186 /* 1187 * Disable all IRQs before setting up the handler 1188 */ 1189 at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST); 1190 at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF); 1191 1192 if (st->caps->has_tsmr) 1193 ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0, 1194 pdev->dev.driver->name, idev); 1195 else 1196 ret = request_irq(st->irq, at91_adc_rl_interrupt, 0, 1197 pdev->dev.driver->name, idev); 1198 if (ret) { 1199 dev_err(&pdev->dev, "Failed to allocate IRQ.\n"); 1200 return ret; 1201 } 1202 1203 st->clk = devm_clk_get(&pdev->dev, "adc_clk"); 1204 if (IS_ERR(st->clk)) { 1205 dev_err(&pdev->dev, "Failed to get the clock.\n"); 1206 ret = PTR_ERR(st->clk); 1207 goto error_free_irq; 1208 } 1209 1210 ret = clk_prepare_enable(st->clk); 1211 if (ret) { 1212 dev_err(&pdev->dev, 1213 "Could not prepare or enable the clock.\n"); 1214 goto error_free_irq; 1215 } 1216 1217 st->adc_clk = devm_clk_get(&pdev->dev, "adc_op_clk"); 1218 if (IS_ERR(st->adc_clk)) { 1219 dev_err(&pdev->dev, "Failed to get the ADC clock.\n"); 1220 ret = PTR_ERR(st->adc_clk); 1221 goto error_disable_clk; 1222 } 1223 1224 ret = clk_prepare_enable(st->adc_clk); 1225 if (ret) { 1226 dev_err(&pdev->dev, 1227 "Could not prepare or enable the ADC clock.\n"); 1228 goto error_disable_clk; 1229 } 1230 1231 /* 1232 * Prescaler rate computation using the formula from the Atmel's 1233 * datasheet : ADC Clock = MCK / ((Prescaler + 1) * 2), ADC Clock being 1234 * specified by the electrical characteristics of the board. 1235 */ 1236 mstrclk = clk_get_rate(st->clk); 1237 adc_clk = clk_get_rate(st->adc_clk); 1238 adc_clk_khz = adc_clk / 1000; 1239 1240 dev_dbg(&pdev->dev, "Master clock is set as: %d Hz, adc_clk should set as: %d Hz\n", 1241 mstrclk, adc_clk); 1242 1243 prsc = (mstrclk / (2 * adc_clk)) - 1; 1244 1245 if (!st->startup_time) { 1246 dev_err(&pdev->dev, "No startup time available.\n"); 1247 ret = -EINVAL; 1248 goto error_disable_adc_clk; 1249 } 1250 ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz); 1251 1252 /* 1253 * a minimal Sample and Hold Time is necessary for the ADC to guarantee 1254 * the best converted final value between two channels selection 1255 * The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock 1256 */ 1257 if (st->sample_hold_time > 0) 1258 shtim = round_up((st->sample_hold_time * adc_clk_khz / 1000) 1259 - 1, 1); 1260 else 1261 shtim = 0; 1262 1263 reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask; 1264 reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask; 1265 if (st->low_res) 1266 reg |= AT91_ADC_LOWRES; 1267 if (st->sleep_mode) 1268 reg |= AT91_ADC_SLEEP; 1269 reg |= AT91_ADC_SHTIM_(shtim) & AT91_ADC_SHTIM; 1270 at91_adc_writel(st, AT91_ADC_MR, reg); 1271 1272 /* Setup the ADC channels available on the board */ 1273 ret = at91_adc_channel_init(idev); 1274 if (ret < 0) { 1275 dev_err(&pdev->dev, "Couldn't initialize the channels.\n"); 1276 goto error_disable_adc_clk; 1277 } 1278 1279 init_waitqueue_head(&st->wq_data_avail); 1280 mutex_init(&st->lock); 1281 1282 /* 1283 * Since touch screen will set trigger register as period trigger. So 1284 * when touch screen is enabled, then we have to disable hardware 1285 * trigger for classic adc. 1286 */ 1287 if (!st->touchscreen_type) { 1288 ret = at91_adc_buffer_init(idev); 1289 if (ret < 0) { 1290 dev_err(&pdev->dev, "Couldn't initialize the buffer.\n"); 1291 goto error_disable_adc_clk; 1292 } 1293 1294 ret = at91_adc_trigger_init(idev); 1295 if (ret < 0) { 1296 dev_err(&pdev->dev, "Couldn't setup the triggers.\n"); 1297 at91_adc_buffer_remove(idev); 1298 goto error_disable_adc_clk; 1299 } 1300 } else { 1301 ret = at91_ts_register(st, pdev); 1302 if (ret) 1303 goto error_disable_adc_clk; 1304 1305 at91_ts_hw_init(st, adc_clk_khz); 1306 } 1307 1308 ret = iio_device_register(idev); 1309 if (ret < 0) { 1310 dev_err(&pdev->dev, "Couldn't register the device.\n"); 1311 goto error_iio_device_register; 1312 } 1313 1314 return 0; 1315 1316 error_iio_device_register: 1317 if (!st->touchscreen_type) { 1318 at91_adc_trigger_remove(idev); 1319 at91_adc_buffer_remove(idev); 1320 } else { 1321 at91_ts_unregister(st); 1322 } 1323 error_disable_adc_clk: 1324 clk_disable_unprepare(st->adc_clk); 1325 error_disable_clk: 1326 clk_disable_unprepare(st->clk); 1327 error_free_irq: 1328 free_irq(st->irq, idev); 1329 return ret; 1330 } 1331 1332 static int at91_adc_remove(struct platform_device *pdev) 1333 { 1334 struct iio_dev *idev = platform_get_drvdata(pdev); 1335 struct at91_adc_state *st = iio_priv(idev); 1336 1337 iio_device_unregister(idev); 1338 if (!st->touchscreen_type) { 1339 at91_adc_trigger_remove(idev); 1340 at91_adc_buffer_remove(idev); 1341 } else { 1342 at91_ts_unregister(st); 1343 } 1344 clk_disable_unprepare(st->adc_clk); 1345 clk_disable_unprepare(st->clk); 1346 free_irq(st->irq, idev); 1347 1348 return 0; 1349 } 1350 1351 #ifdef CONFIG_PM_SLEEP 1352 static int at91_adc_suspend(struct device *dev) 1353 { 1354 struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev)); 1355 struct at91_adc_state *st = iio_priv(idev); 1356 1357 pinctrl_pm_select_sleep_state(dev); 1358 clk_disable_unprepare(st->clk); 1359 1360 return 0; 1361 } 1362 1363 static int at91_adc_resume(struct device *dev) 1364 { 1365 struct iio_dev *idev = platform_get_drvdata(to_platform_device(dev)); 1366 struct at91_adc_state *st = iio_priv(idev); 1367 1368 clk_prepare_enable(st->clk); 1369 pinctrl_pm_select_default_state(dev); 1370 1371 return 0; 1372 } 1373 #endif 1374 1375 static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume); 1376 1377 static struct at91_adc_caps at91sam9260_caps = { 1378 .calc_startup_ticks = calc_startup_ticks_9260, 1379 .num_channels = 4, 1380 .registers = { 1381 .channel_base = AT91_ADC_CHR(0), 1382 .drdy_mask = AT91_ADC_DRDY, 1383 .status_register = AT91_ADC_SR, 1384 .trigger_register = AT91_ADC_TRGR_9260, 1385 .mr_prescal_mask = AT91_ADC_PRESCAL_9260, 1386 .mr_startup_mask = AT91_ADC_STARTUP_9260, 1387 }, 1388 }; 1389 1390 static struct at91_adc_caps at91sam9rl_caps = { 1391 .has_ts = true, 1392 .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */ 1393 .num_channels = 6, 1394 .registers = { 1395 .channel_base = AT91_ADC_CHR(0), 1396 .drdy_mask = AT91_ADC_DRDY, 1397 .status_register = AT91_ADC_SR, 1398 .trigger_register = AT91_ADC_TRGR_9G45, 1399 .mr_prescal_mask = AT91_ADC_PRESCAL_9260, 1400 .mr_startup_mask = AT91_ADC_STARTUP_9G45, 1401 }, 1402 }; 1403 1404 static struct at91_adc_caps at91sam9g45_caps = { 1405 .has_ts = true, 1406 .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */ 1407 .num_channels = 8, 1408 .registers = { 1409 .channel_base = AT91_ADC_CHR(0), 1410 .drdy_mask = AT91_ADC_DRDY, 1411 .status_register = AT91_ADC_SR, 1412 .trigger_register = AT91_ADC_TRGR_9G45, 1413 .mr_prescal_mask = AT91_ADC_PRESCAL_9G45, 1414 .mr_startup_mask = AT91_ADC_STARTUP_9G45, 1415 }, 1416 }; 1417 1418 static struct at91_adc_caps at91sam9x5_caps = { 1419 .has_ts = true, 1420 .has_tsmr = true, 1421 .ts_filter_average = 3, 1422 .ts_pen_detect_sensitivity = 2, 1423 .calc_startup_ticks = calc_startup_ticks_9x5, 1424 .num_channels = 12, 1425 .registers = { 1426 .channel_base = AT91_ADC_CDR0_9X5, 1427 .drdy_mask = AT91_ADC_SR_DRDY_9X5, 1428 .status_register = AT91_ADC_SR_9X5, 1429 .trigger_register = AT91_ADC_TRGR_9X5, 1430 /* prescal mask is same as 9G45 */ 1431 .mr_prescal_mask = AT91_ADC_PRESCAL_9G45, 1432 .mr_startup_mask = AT91_ADC_STARTUP_9X5, 1433 }, 1434 }; 1435 1436 static const struct of_device_id at91_adc_dt_ids[] = { 1437 { .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps }, 1438 { .compatible = "atmel,at91sam9rl-adc", .data = &at91sam9rl_caps }, 1439 { .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps }, 1440 { .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps }, 1441 {}, 1442 }; 1443 MODULE_DEVICE_TABLE(of, at91_adc_dt_ids); 1444 1445 static const struct platform_device_id at91_adc_ids[] = { 1446 { 1447 .name = "at91sam9260-adc", 1448 .driver_data = (unsigned long)&at91sam9260_caps, 1449 }, { 1450 .name = "at91sam9rl-adc", 1451 .driver_data = (unsigned long)&at91sam9rl_caps, 1452 }, { 1453 .name = "at91sam9g45-adc", 1454 .driver_data = (unsigned long)&at91sam9g45_caps, 1455 }, { 1456 .name = "at91sam9x5-adc", 1457 .driver_data = (unsigned long)&at91sam9x5_caps, 1458 }, { 1459 /* terminator */ 1460 } 1461 }; 1462 MODULE_DEVICE_TABLE(platform, at91_adc_ids); 1463 1464 static struct platform_driver at91_adc_driver = { 1465 .probe = at91_adc_probe, 1466 .remove = at91_adc_remove, 1467 .id_table = at91_adc_ids, 1468 .driver = { 1469 .name = DRIVER_NAME, 1470 .of_match_table = of_match_ptr(at91_adc_dt_ids), 1471 .pm = &at91_adc_pm_ops, 1472 }, 1473 }; 1474 1475 module_platform_driver(at91_adc_driver); 1476 1477 MODULE_LICENSE("GPL"); 1478 MODULE_DESCRIPTION("Atmel AT91 ADC Driver"); 1479 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); 1480