1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Atmel ADC driver for SAMA5D2 devices and compatible. 4 * 5 * Copyright (C) 2015 Atmel, 6 * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> 7 */ 8 9 #include <linux/bitops.h> 10 #include <linux/clk.h> 11 #include <linux/dma-mapping.h> 12 #include <linux/dmaengine.h> 13 #include <linux/interrupt.h> 14 #include <linux/io.h> 15 #include <linux/module.h> 16 #include <linux/of_device.h> 17 #include <linux/platform_device.h> 18 #include <linux/sched.h> 19 #include <linux/wait.h> 20 #include <linux/iio/iio.h> 21 #include <linux/iio/sysfs.h> 22 #include <linux/iio/buffer.h> 23 #include <linux/iio/trigger.h> 24 #include <linux/iio/trigger_consumer.h> 25 #include <linux/iio/triggered_buffer.h> 26 #include <linux/pinctrl/consumer.h> 27 #include <linux/regulator/consumer.h> 28 29 /* Control Register */ 30 #define AT91_SAMA5D2_CR 0x00 31 /* Software Reset */ 32 #define AT91_SAMA5D2_CR_SWRST BIT(0) 33 /* Start Conversion */ 34 #define AT91_SAMA5D2_CR_START BIT(1) 35 /* Touchscreen Calibration */ 36 #define AT91_SAMA5D2_CR_TSCALIB BIT(2) 37 /* Comparison Restart */ 38 #define AT91_SAMA5D2_CR_CMPRST BIT(4) 39 40 /* Mode Register */ 41 #define AT91_SAMA5D2_MR 0x04 42 /* Trigger Selection */ 43 #define AT91_SAMA5D2_MR_TRGSEL(v) ((v) << 1) 44 /* ADTRG */ 45 #define AT91_SAMA5D2_MR_TRGSEL_TRIG0 0 46 /* TIOA0 */ 47 #define AT91_SAMA5D2_MR_TRGSEL_TRIG1 1 48 /* TIOA1 */ 49 #define AT91_SAMA5D2_MR_TRGSEL_TRIG2 2 50 /* TIOA2 */ 51 #define AT91_SAMA5D2_MR_TRGSEL_TRIG3 3 52 /* PWM event line 0 */ 53 #define AT91_SAMA5D2_MR_TRGSEL_TRIG4 4 54 /* PWM event line 1 */ 55 #define AT91_SAMA5D2_MR_TRGSEL_TRIG5 5 56 /* TIOA3 */ 57 #define AT91_SAMA5D2_MR_TRGSEL_TRIG6 6 58 /* RTCOUT0 */ 59 #define AT91_SAMA5D2_MR_TRGSEL_TRIG7 7 60 /* Sleep Mode */ 61 #define AT91_SAMA5D2_MR_SLEEP BIT(5) 62 /* Fast Wake Up */ 63 #define AT91_SAMA5D2_MR_FWUP BIT(6) 64 /* Prescaler Rate Selection */ 65 #define AT91_SAMA5D2_MR_PRESCAL(v) ((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET) 66 #define AT91_SAMA5D2_MR_PRESCAL_OFFSET 8 67 #define AT91_SAMA5D2_MR_PRESCAL_MAX 0xff 68 #define AT91_SAMA5D2_MR_PRESCAL_MASK GENMASK(15, 8) 69 /* Startup Time */ 70 #define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16) 71 #define AT91_SAMA5D2_MR_STARTUP_MASK GENMASK(19, 16) 72 /* Analog Change */ 73 #define AT91_SAMA5D2_MR_ANACH BIT(23) 74 /* Tracking Time */ 75 #define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24) 76 #define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff 77 /* Transfer Time */ 78 #define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28) 79 #define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3 80 /* Use Sequence Enable */ 81 #define AT91_SAMA5D2_MR_USEQ BIT(31) 82 83 /* Channel Sequence Register 1 */ 84 #define AT91_SAMA5D2_SEQR1 0x08 85 /* Channel Sequence Register 2 */ 86 #define AT91_SAMA5D2_SEQR2 0x0c 87 /* Channel Enable Register */ 88 #define AT91_SAMA5D2_CHER 0x10 89 /* Channel Disable Register */ 90 #define AT91_SAMA5D2_CHDR 0x14 91 /* Channel Status Register */ 92 #define AT91_SAMA5D2_CHSR 0x18 93 /* Last Converted Data Register */ 94 #define AT91_SAMA5D2_LCDR 0x20 95 /* Interrupt Enable Register */ 96 #define AT91_SAMA5D2_IER 0x24 97 /* Interrupt Enable Register - TS X measurement ready */ 98 #define AT91_SAMA5D2_IER_XRDY BIT(20) 99 /* Interrupt Enable Register - TS Y measurement ready */ 100 #define AT91_SAMA5D2_IER_YRDY BIT(21) 101 /* Interrupt Enable Register - TS pressure measurement ready */ 102 #define AT91_SAMA5D2_IER_PRDY BIT(22) 103 /* Interrupt Enable Register - general overrun error */ 104 #define AT91_SAMA5D2_IER_GOVRE BIT(25) 105 /* Interrupt Enable Register - Pen detect */ 106 #define AT91_SAMA5D2_IER_PEN BIT(29) 107 /* Interrupt Enable Register - No pen detect */ 108 #define AT91_SAMA5D2_IER_NOPEN BIT(30) 109 /* Interrupt Disable Register */ 110 #define AT91_SAMA5D2_IDR 0x28 111 /* Interrupt Mask Register */ 112 #define AT91_SAMA5D2_IMR 0x2c 113 /* Interrupt Status Register */ 114 #define AT91_SAMA5D2_ISR 0x30 115 /* Interrupt Status Register - Pen touching sense status */ 116 #define AT91_SAMA5D2_ISR_PENS BIT(31) 117 /* Last Channel Trigger Mode Register */ 118 #define AT91_SAMA5D2_LCTMR 0x34 119 /* Last Channel Compare Window Register */ 120 #define AT91_SAMA5D2_LCCWR 0x38 121 /* Overrun Status Register */ 122 #define AT91_SAMA5D2_OVER 0x3c 123 /* Extended Mode Register */ 124 #define AT91_SAMA5D2_EMR 0x40 125 /* Extended Mode Register - Oversampling rate */ 126 #define AT91_SAMA5D2_EMR_OSR(V) ((V) << 16) 127 #define AT91_SAMA5D2_EMR_OSR_MASK GENMASK(17, 16) 128 #define AT91_SAMA5D2_EMR_OSR_1SAMPLES 0 129 #define AT91_SAMA5D2_EMR_OSR_4SAMPLES 1 130 #define AT91_SAMA5D2_EMR_OSR_16SAMPLES 2 131 132 /* Extended Mode Register - Averaging on single trigger event */ 133 #define AT91_SAMA5D2_EMR_ASTE(V) ((V) << 20) 134 /* Compare Window Register */ 135 #define AT91_SAMA5D2_CWR 0x44 136 /* Channel Gain Register */ 137 #define AT91_SAMA5D2_CGR 0x48 138 139 /* Channel Offset Register */ 140 #define AT91_SAMA5D2_COR 0x4c 141 #define AT91_SAMA5D2_COR_DIFF_OFFSET 16 142 143 /* Channel Data Register 0 */ 144 #define AT91_SAMA5D2_CDR0 0x50 145 /* Analog Control Register */ 146 #define AT91_SAMA5D2_ACR 0x94 147 /* Analog Control Register - Pen detect sensitivity mask */ 148 #define AT91_SAMA5D2_ACR_PENDETSENS_MASK GENMASK(1, 0) 149 150 /* Touchscreen Mode Register */ 151 #define AT91_SAMA5D2_TSMR 0xb0 152 /* Touchscreen Mode Register - No touch mode */ 153 #define AT91_SAMA5D2_TSMR_TSMODE_NONE 0 154 /* Touchscreen Mode Register - 4 wire screen, no pressure measurement */ 155 #define AT91_SAMA5D2_TSMR_TSMODE_4WIRE_NO_PRESS 1 156 /* Touchscreen Mode Register - 4 wire screen, pressure measurement */ 157 #define AT91_SAMA5D2_TSMR_TSMODE_4WIRE_PRESS 2 158 /* Touchscreen Mode Register - 5 wire screen */ 159 #define AT91_SAMA5D2_TSMR_TSMODE_5WIRE 3 160 /* Touchscreen Mode Register - Average samples mask */ 161 #define AT91_SAMA5D2_TSMR_TSAV_MASK GENMASK(5, 4) 162 /* Touchscreen Mode Register - Average samples */ 163 #define AT91_SAMA5D2_TSMR_TSAV(x) ((x) << 4) 164 /* Touchscreen Mode Register - Touch/trigger frequency ratio mask */ 165 #define AT91_SAMA5D2_TSMR_TSFREQ_MASK GENMASK(11, 8) 166 /* Touchscreen Mode Register - Touch/trigger frequency ratio */ 167 #define AT91_SAMA5D2_TSMR_TSFREQ(x) ((x) << 8) 168 /* Touchscreen Mode Register - Pen Debounce Time mask */ 169 #define AT91_SAMA5D2_TSMR_PENDBC_MASK GENMASK(31, 28) 170 /* Touchscreen Mode Register - Pen Debounce Time */ 171 #define AT91_SAMA5D2_TSMR_PENDBC(x) ((x) << 28) 172 /* Touchscreen Mode Register - No DMA for touch measurements */ 173 #define AT91_SAMA5D2_TSMR_NOTSDMA BIT(22) 174 /* Touchscreen Mode Register - Disable pen detection */ 175 #define AT91_SAMA5D2_TSMR_PENDET_DIS (0 << 24) 176 /* Touchscreen Mode Register - Enable pen detection */ 177 #define AT91_SAMA5D2_TSMR_PENDET_ENA BIT(24) 178 179 /* Touchscreen X Position Register */ 180 #define AT91_SAMA5D2_XPOSR 0xb4 181 /* Touchscreen Y Position Register */ 182 #define AT91_SAMA5D2_YPOSR 0xb8 183 /* Touchscreen Pressure Register */ 184 #define AT91_SAMA5D2_PRESSR 0xbc 185 /* Trigger Register */ 186 #define AT91_SAMA5D2_TRGR 0xc0 187 /* Mask for TRGMOD field of TRGR register */ 188 #define AT91_SAMA5D2_TRGR_TRGMOD_MASK GENMASK(2, 0) 189 /* No trigger, only software trigger can start conversions */ 190 #define AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER 0 191 /* Trigger Mode external trigger rising edge */ 192 #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE 1 193 /* Trigger Mode external trigger falling edge */ 194 #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL 2 195 /* Trigger Mode external trigger any edge */ 196 #define AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY 3 197 /* Trigger Mode internal periodic */ 198 #define AT91_SAMA5D2_TRGR_TRGMOD_PERIODIC 5 199 /* Trigger Mode - trigger period mask */ 200 #define AT91_SAMA5D2_TRGR_TRGPER_MASK GENMASK(31, 16) 201 /* Trigger Mode - trigger period */ 202 #define AT91_SAMA5D2_TRGR_TRGPER(x) ((x) << 16) 203 204 /* Correction Select Register */ 205 #define AT91_SAMA5D2_COSR 0xd0 206 /* Correction Value Register */ 207 #define AT91_SAMA5D2_CVR 0xd4 208 /* Channel Error Correction Register */ 209 #define AT91_SAMA5D2_CECR 0xd8 210 /* Write Protection Mode Register */ 211 #define AT91_SAMA5D2_WPMR 0xe4 212 /* Write Protection Status Register */ 213 #define AT91_SAMA5D2_WPSR 0xe8 214 /* Version Register */ 215 #define AT91_SAMA5D2_VERSION 0xfc 216 217 #define AT91_SAMA5D2_HW_TRIG_CNT 3 218 #define AT91_SAMA5D2_SINGLE_CHAN_CNT 12 219 #define AT91_SAMA5D2_DIFF_CHAN_CNT 6 220 221 #define AT91_SAMA5D2_TIMESTAMP_CHAN_IDX (AT91_SAMA5D2_SINGLE_CHAN_CNT + \ 222 AT91_SAMA5D2_DIFF_CHAN_CNT + 1) 223 224 #define AT91_SAMA5D2_TOUCH_X_CHAN_IDX (AT91_SAMA5D2_SINGLE_CHAN_CNT + \ 225 AT91_SAMA5D2_DIFF_CHAN_CNT * 2) 226 #define AT91_SAMA5D2_TOUCH_Y_CHAN_IDX (AT91_SAMA5D2_TOUCH_X_CHAN_IDX + 1) 227 #define AT91_SAMA5D2_TOUCH_P_CHAN_IDX (AT91_SAMA5D2_TOUCH_Y_CHAN_IDX + 1) 228 #define AT91_SAMA5D2_MAX_CHAN_IDX AT91_SAMA5D2_TOUCH_P_CHAN_IDX 229 230 #define AT91_SAMA5D2_TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */ 231 #define AT91_SAMA5D2_TOUCH_PEN_DETECT_DEBOUNCE_US 200 232 233 #define AT91_SAMA5D2_XYZ_MASK GENMASK(11, 0) 234 235 #define AT91_SAMA5D2_MAX_POS_BITS 12 236 237 /* 238 * Maximum number of bytes to hold conversion from all channels 239 * without the timestamp. 240 */ 241 #define AT91_BUFFER_MAX_CONVERSION_BYTES ((AT91_SAMA5D2_SINGLE_CHAN_CNT + \ 242 AT91_SAMA5D2_DIFF_CHAN_CNT) * 2) 243 244 /* This total must also include the timestamp */ 245 #define AT91_BUFFER_MAX_BYTES (AT91_BUFFER_MAX_CONVERSION_BYTES + 8) 246 247 #define AT91_BUFFER_MAX_HWORDS (AT91_BUFFER_MAX_BYTES / 2) 248 249 #define AT91_HWFIFO_MAX_SIZE_STR "128" 250 #define AT91_HWFIFO_MAX_SIZE 128 251 252 /* Possible values for oversampling ratio */ 253 #define AT91_OSR_1SAMPLES 1 254 #define AT91_OSR_4SAMPLES 4 255 #define AT91_OSR_16SAMPLES 16 256 257 #define AT91_SAMA5D2_CHAN_SINGLE(num, addr) \ 258 { \ 259 .type = IIO_VOLTAGE, \ 260 .channel = num, \ 261 .address = addr, \ 262 .scan_index = num, \ 263 .scan_type = { \ 264 .sign = 'u', \ 265 .realbits = 14, \ 266 .storagebits = 16, \ 267 }, \ 268 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 269 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ 270 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ 271 BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ 272 .datasheet_name = "CH"#num, \ 273 .indexed = 1, \ 274 } 275 276 #define AT91_SAMA5D2_CHAN_DIFF(num, num2, addr) \ 277 { \ 278 .type = IIO_VOLTAGE, \ 279 .differential = 1, \ 280 .channel = num, \ 281 .channel2 = num2, \ 282 .address = addr, \ 283 .scan_index = num + AT91_SAMA5D2_SINGLE_CHAN_CNT, \ 284 .scan_type = { \ 285 .sign = 's', \ 286 .realbits = 14, \ 287 .storagebits = 16, \ 288 }, \ 289 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 290 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ 291 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ 292 BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ 293 .datasheet_name = "CH"#num"-CH"#num2, \ 294 .indexed = 1, \ 295 } 296 297 #define AT91_SAMA5D2_CHAN_TOUCH(num, name, mod) \ 298 { \ 299 .type = IIO_POSITIONRELATIVE, \ 300 .modified = 1, \ 301 .channel = num, \ 302 .channel2 = mod, \ 303 .scan_index = num, \ 304 .scan_type = { \ 305 .sign = 'u', \ 306 .realbits = 12, \ 307 .storagebits = 16, \ 308 }, \ 309 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 310 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ 311 BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ 312 .datasheet_name = name, \ 313 } 314 #define AT91_SAMA5D2_CHAN_PRESSURE(num, name) \ 315 { \ 316 .type = IIO_PRESSURE, \ 317 .channel = num, \ 318 .scan_index = num, \ 319 .scan_type = { \ 320 .sign = 'u', \ 321 .realbits = 12, \ 322 .storagebits = 16, \ 323 }, \ 324 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 325 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\ 326 BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ 327 .datasheet_name = name, \ 328 } 329 330 #define at91_adc_readl(st, reg) readl_relaxed(st->base + reg) 331 #define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg) 332 333 struct at91_adc_soc_info { 334 unsigned startup_time; 335 unsigned min_sample_rate; 336 unsigned max_sample_rate; 337 }; 338 339 struct at91_adc_trigger { 340 char *name; 341 unsigned int trgmod_value; 342 unsigned int edge_type; 343 bool hw_trig; 344 }; 345 346 /** 347 * at91_adc_dma - at91-sama5d2 dma information struct 348 * @dma_chan: the dma channel acquired 349 * @rx_buf: dma coherent allocated area 350 * @rx_dma_buf: dma handler for the buffer 351 * @phys_addr: physical address of the ADC base register 352 * @buf_idx: index inside the dma buffer where reading was last done 353 * @rx_buf_sz: size of buffer used by DMA operation 354 * @watermark: number of conversions to copy before DMA triggers irq 355 * @dma_ts: hold the start timestamp of dma operation 356 */ 357 struct at91_adc_dma { 358 struct dma_chan *dma_chan; 359 u8 *rx_buf; 360 dma_addr_t rx_dma_buf; 361 phys_addr_t phys_addr; 362 int buf_idx; 363 int rx_buf_sz; 364 int watermark; 365 s64 dma_ts; 366 }; 367 368 /** 369 * at91_adc_touch - at91-sama5d2 touchscreen information struct 370 * @sample_period_val: the value for periodic trigger interval 371 * @touching: is the pen touching the screen or not 372 * @x_pos: temporary placeholder for pressure computation 373 * @channels_bitmask: bitmask with the touchscreen channels enabled 374 * @workq: workqueue for buffer data pushing 375 */ 376 struct at91_adc_touch { 377 u16 sample_period_val; 378 bool touching; 379 u16 x_pos; 380 unsigned long channels_bitmask; 381 struct work_struct workq; 382 }; 383 384 struct at91_adc_state { 385 void __iomem *base; 386 int irq; 387 struct clk *per_clk; 388 struct regulator *reg; 389 struct regulator *vref; 390 int vref_uv; 391 unsigned int current_sample_rate; 392 struct iio_trigger *trig; 393 const struct at91_adc_trigger *selected_trig; 394 const struct iio_chan_spec *chan; 395 bool conversion_done; 396 u32 conversion_value; 397 unsigned int oversampling_ratio; 398 struct at91_adc_soc_info soc_info; 399 wait_queue_head_t wq_data_available; 400 struct at91_adc_dma dma_st; 401 struct at91_adc_touch touch_st; 402 u16 buffer[AT91_BUFFER_MAX_HWORDS]; 403 /* 404 * lock to prevent concurrent 'single conversion' requests through 405 * sysfs. 406 */ 407 struct mutex lock; 408 }; 409 410 static const struct at91_adc_trigger at91_adc_trigger_list[] = { 411 { 412 .name = "external_rising", 413 .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE, 414 .edge_type = IRQ_TYPE_EDGE_RISING, 415 .hw_trig = true, 416 }, 417 { 418 .name = "external_falling", 419 .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL, 420 .edge_type = IRQ_TYPE_EDGE_FALLING, 421 .hw_trig = true, 422 }, 423 { 424 .name = "external_any", 425 .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY, 426 .edge_type = IRQ_TYPE_EDGE_BOTH, 427 .hw_trig = true, 428 }, 429 { 430 .name = "software", 431 .trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER, 432 .edge_type = IRQ_TYPE_NONE, 433 .hw_trig = false, 434 }, 435 }; 436 437 static const struct iio_chan_spec at91_adc_channels[] = { 438 AT91_SAMA5D2_CHAN_SINGLE(0, 0x50), 439 AT91_SAMA5D2_CHAN_SINGLE(1, 0x54), 440 AT91_SAMA5D2_CHAN_SINGLE(2, 0x58), 441 AT91_SAMA5D2_CHAN_SINGLE(3, 0x5c), 442 AT91_SAMA5D2_CHAN_SINGLE(4, 0x60), 443 AT91_SAMA5D2_CHAN_SINGLE(5, 0x64), 444 AT91_SAMA5D2_CHAN_SINGLE(6, 0x68), 445 AT91_SAMA5D2_CHAN_SINGLE(7, 0x6c), 446 AT91_SAMA5D2_CHAN_SINGLE(8, 0x70), 447 AT91_SAMA5D2_CHAN_SINGLE(9, 0x74), 448 AT91_SAMA5D2_CHAN_SINGLE(10, 0x78), 449 AT91_SAMA5D2_CHAN_SINGLE(11, 0x7c), 450 AT91_SAMA5D2_CHAN_DIFF(0, 1, 0x50), 451 AT91_SAMA5D2_CHAN_DIFF(2, 3, 0x58), 452 AT91_SAMA5D2_CHAN_DIFF(4, 5, 0x60), 453 AT91_SAMA5D2_CHAN_DIFF(6, 7, 0x68), 454 AT91_SAMA5D2_CHAN_DIFF(8, 9, 0x70), 455 AT91_SAMA5D2_CHAN_DIFF(10, 11, 0x78), 456 IIO_CHAN_SOFT_TIMESTAMP(AT91_SAMA5D2_TIMESTAMP_CHAN_IDX), 457 AT91_SAMA5D2_CHAN_TOUCH(AT91_SAMA5D2_TOUCH_X_CHAN_IDX, "x", IIO_MOD_X), 458 AT91_SAMA5D2_CHAN_TOUCH(AT91_SAMA5D2_TOUCH_Y_CHAN_IDX, "y", IIO_MOD_Y), 459 AT91_SAMA5D2_CHAN_PRESSURE(AT91_SAMA5D2_TOUCH_P_CHAN_IDX, "pressure"), 460 }; 461 462 static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan) 463 { 464 int i; 465 466 for (i = 0; i < indio_dev->num_channels; i++) { 467 if (indio_dev->channels[i].scan_index == chan) 468 return i; 469 } 470 return -EINVAL; 471 } 472 473 static inline struct iio_chan_spec const * 474 at91_adc_chan_get(struct iio_dev *indio_dev, int chan) 475 { 476 int index = at91_adc_chan_xlate(indio_dev, chan); 477 478 if (index < 0) 479 return NULL; 480 return indio_dev->channels + index; 481 } 482 483 static inline int at91_adc_of_xlate(struct iio_dev *indio_dev, 484 const struct of_phandle_args *iiospec) 485 { 486 return at91_adc_chan_xlate(indio_dev, iiospec->args[0]); 487 } 488 489 static void at91_adc_config_emr(struct at91_adc_state *st) 490 { 491 /* configure the extended mode register */ 492 unsigned int emr = at91_adc_readl(st, AT91_SAMA5D2_EMR); 493 494 /* select oversampling per single trigger event */ 495 emr |= AT91_SAMA5D2_EMR_ASTE(1); 496 497 /* delete leftover content if it's the case */ 498 emr &= ~AT91_SAMA5D2_EMR_OSR_MASK; 499 500 /* select oversampling ratio from configuration */ 501 switch (st->oversampling_ratio) { 502 case AT91_OSR_1SAMPLES: 503 emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) & 504 AT91_SAMA5D2_EMR_OSR_MASK; 505 break; 506 case AT91_OSR_4SAMPLES: 507 emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) & 508 AT91_SAMA5D2_EMR_OSR_MASK; 509 break; 510 case AT91_OSR_16SAMPLES: 511 emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) & 512 AT91_SAMA5D2_EMR_OSR_MASK; 513 break; 514 } 515 516 at91_adc_writel(st, AT91_SAMA5D2_EMR, emr); 517 } 518 519 static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val) 520 { 521 if (st->oversampling_ratio == AT91_OSR_1SAMPLES) { 522 /* 523 * in this case we only have 12 bits of real data, but channel 524 * is registered as 14 bits, so shift left two bits 525 */ 526 *val <<= 2; 527 } else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) { 528 /* 529 * in this case we have 13 bits of real data, but channel 530 * is registered as 14 bits, so left shift one bit 531 */ 532 *val <<= 1; 533 } 534 535 return IIO_VAL_INT; 536 } 537 538 static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf, 539 int len) 540 { 541 int i = 0, val; 542 u16 *buf_u16 = (u16 *) buf; 543 544 /* 545 * We are converting each two bytes (each sample). 546 * First convert the byte based array to u16, and convert each sample 547 * separately. 548 * Each value is two bytes in an array of chars, so to not shift 549 * more than we need, save the value separately. 550 * len is in bytes, so divide by two to get number of samples. 551 */ 552 while (i < len / 2) { 553 val = buf_u16[i]; 554 at91_adc_adjust_val_osr(st, &val); 555 buf_u16[i] = val; 556 i++; 557 } 558 } 559 560 static int at91_adc_configure_touch(struct at91_adc_state *st, bool state) 561 { 562 u32 clk_khz = st->current_sample_rate / 1000; 563 int i = 0; 564 u16 pendbc; 565 u32 tsmr, acr; 566 567 if (!state) { 568 /* disabling touch IRQs and setting mode to no touch enabled */ 569 at91_adc_writel(st, AT91_SAMA5D2_IDR, 570 AT91_SAMA5D2_IER_PEN | AT91_SAMA5D2_IER_NOPEN); 571 at91_adc_writel(st, AT91_SAMA5D2_TSMR, 0); 572 return 0; 573 } 574 /* 575 * debounce time is in microseconds, we need it in milliseconds to 576 * multiply with kilohertz, so, divide by 1000, but after the multiply. 577 * round up to make sure pendbc is at least 1 578 */ 579 pendbc = round_up(AT91_SAMA5D2_TOUCH_PEN_DETECT_DEBOUNCE_US * 580 clk_khz / 1000, 1); 581 582 /* get the required exponent */ 583 while (pendbc >> i++) 584 ; 585 586 pendbc = i; 587 588 tsmr = AT91_SAMA5D2_TSMR_TSMODE_4WIRE_PRESS; 589 590 tsmr |= AT91_SAMA5D2_TSMR_TSAV(2) & AT91_SAMA5D2_TSMR_TSAV_MASK; 591 tsmr |= AT91_SAMA5D2_TSMR_PENDBC(pendbc) & 592 AT91_SAMA5D2_TSMR_PENDBC_MASK; 593 tsmr |= AT91_SAMA5D2_TSMR_NOTSDMA; 594 tsmr |= AT91_SAMA5D2_TSMR_PENDET_ENA; 595 tsmr |= AT91_SAMA5D2_TSMR_TSFREQ(2) & AT91_SAMA5D2_TSMR_TSFREQ_MASK; 596 597 at91_adc_writel(st, AT91_SAMA5D2_TSMR, tsmr); 598 599 acr = at91_adc_readl(st, AT91_SAMA5D2_ACR); 600 acr &= ~AT91_SAMA5D2_ACR_PENDETSENS_MASK; 601 acr |= 0x02 & AT91_SAMA5D2_ACR_PENDETSENS_MASK; 602 at91_adc_writel(st, AT91_SAMA5D2_ACR, acr); 603 604 /* Sample Period Time = (TRGPER + 1) / ADCClock */ 605 st->touch_st.sample_period_val = 606 round_up((AT91_SAMA5D2_TOUCH_SAMPLE_PERIOD_US * 607 clk_khz / 1000) - 1, 1); 608 /* enable pen detect IRQ */ 609 at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_PEN); 610 611 return 0; 612 } 613 614 static u16 at91_adc_touch_pos(struct at91_adc_state *st, int reg) 615 { 616 u32 val; 617 u32 scale, result, pos; 618 619 /* 620 * to obtain the actual position we must divide by scale 621 * and multiply with max, where 622 * max = 2^AT91_SAMA5D2_MAX_POS_BITS - 1 623 */ 624 /* first half of register is the x or y, second half is the scale */ 625 val = at91_adc_readl(st, reg); 626 if (!val) 627 dev_dbg(&iio_priv_to_dev(st)->dev, "pos is 0\n"); 628 629 pos = val & AT91_SAMA5D2_XYZ_MASK; 630 result = (pos << AT91_SAMA5D2_MAX_POS_BITS) - pos; 631 scale = (val >> 16) & AT91_SAMA5D2_XYZ_MASK; 632 if (scale == 0) { 633 dev_err(&iio_priv_to_dev(st)->dev, "scale is 0\n"); 634 return 0; 635 } 636 result /= scale; 637 638 return result; 639 } 640 641 static u16 at91_adc_touch_x_pos(struct at91_adc_state *st) 642 { 643 st->touch_st.x_pos = at91_adc_touch_pos(st, AT91_SAMA5D2_XPOSR); 644 return st->touch_st.x_pos; 645 } 646 647 static u16 at91_adc_touch_y_pos(struct at91_adc_state *st) 648 { 649 return at91_adc_touch_pos(st, AT91_SAMA5D2_YPOSR); 650 } 651 652 static u16 at91_adc_touch_pressure(struct at91_adc_state *st) 653 { 654 u32 val; 655 u32 z1, z2; 656 u32 pres; 657 u32 rxp = 1; 658 u32 factor = 1000; 659 660 /* calculate the pressure */ 661 val = at91_adc_readl(st, AT91_SAMA5D2_PRESSR); 662 z1 = val & AT91_SAMA5D2_XYZ_MASK; 663 z2 = (val >> 16) & AT91_SAMA5D2_XYZ_MASK; 664 665 if (z1 != 0) 666 pres = rxp * (st->touch_st.x_pos * factor / 1024) * 667 (z2 * factor / z1 - factor) / 668 factor; 669 else 670 pres = 0xFFFF; /* no pen contact */ 671 672 /* 673 * The pressure from device grows down, minimum is 0xFFFF, maximum 0x0. 674 * We compute it this way, but let's return it in the expected way, 675 * growing from 0 to 0xFFFF. 676 */ 677 return 0xFFFF - pres; 678 } 679 680 static int at91_adc_read_position(struct at91_adc_state *st, int chan, u16 *val) 681 { 682 *val = 0; 683 if (!st->touch_st.touching) 684 return -ENODATA; 685 if (chan == AT91_SAMA5D2_TOUCH_X_CHAN_IDX) 686 *val = at91_adc_touch_x_pos(st); 687 else if (chan == AT91_SAMA5D2_TOUCH_Y_CHAN_IDX) 688 *val = at91_adc_touch_y_pos(st); 689 else 690 return -ENODATA; 691 692 return IIO_VAL_INT; 693 } 694 695 static int at91_adc_read_pressure(struct at91_adc_state *st, int chan, u16 *val) 696 { 697 *val = 0; 698 if (!st->touch_st.touching) 699 return -ENODATA; 700 if (chan == AT91_SAMA5D2_TOUCH_P_CHAN_IDX) 701 *val = at91_adc_touch_pressure(st); 702 else 703 return -ENODATA; 704 705 return IIO_VAL_INT; 706 } 707 708 static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) 709 { 710 struct iio_dev *indio = iio_trigger_get_drvdata(trig); 711 struct at91_adc_state *st = iio_priv(indio); 712 u32 status = at91_adc_readl(st, AT91_SAMA5D2_TRGR); 713 u8 bit; 714 715 /* clear TRGMOD */ 716 status &= ~AT91_SAMA5D2_TRGR_TRGMOD_MASK; 717 718 if (state) 719 status |= st->selected_trig->trgmod_value; 720 721 /* set/unset hw trigger */ 722 at91_adc_writel(st, AT91_SAMA5D2_TRGR, status); 723 724 for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) { 725 struct iio_chan_spec const *chan = at91_adc_chan_get(indio, bit); 726 727 if (!chan) 728 continue; 729 /* these channel types cannot be handled by this trigger */ 730 if (chan->type == IIO_POSITIONRELATIVE || 731 chan->type == IIO_PRESSURE) 732 continue; 733 734 if (state) { 735 at91_adc_writel(st, AT91_SAMA5D2_CHER, 736 BIT(chan->channel)); 737 /* enable irq only if not using DMA */ 738 if (!st->dma_st.dma_chan) { 739 at91_adc_writel(st, AT91_SAMA5D2_IER, 740 BIT(chan->channel)); 741 } 742 } else { 743 /* disable irq only if not using DMA */ 744 if (!st->dma_st.dma_chan) { 745 at91_adc_writel(st, AT91_SAMA5D2_IDR, 746 BIT(chan->channel)); 747 } 748 at91_adc_writel(st, AT91_SAMA5D2_CHDR, 749 BIT(chan->channel)); 750 } 751 } 752 753 return 0; 754 } 755 756 static int at91_adc_reenable_trigger(struct iio_trigger *trig) 757 { 758 struct iio_dev *indio = iio_trigger_get_drvdata(trig); 759 struct at91_adc_state *st = iio_priv(indio); 760 761 /* if we are using DMA, we must not reenable irq after each trigger */ 762 if (st->dma_st.dma_chan) 763 return 0; 764 765 enable_irq(st->irq); 766 767 /* Needed to ACK the DRDY interruption */ 768 at91_adc_readl(st, AT91_SAMA5D2_LCDR); 769 return 0; 770 } 771 772 static const struct iio_trigger_ops at91_adc_trigger_ops = { 773 .set_trigger_state = &at91_adc_configure_trigger, 774 .try_reenable = &at91_adc_reenable_trigger, 775 .validate_device = iio_trigger_validate_own_device, 776 }; 777 778 static int at91_adc_dma_size_done(struct at91_adc_state *st) 779 { 780 struct dma_tx_state state; 781 enum dma_status status; 782 int i, size; 783 784 status = dmaengine_tx_status(st->dma_st.dma_chan, 785 st->dma_st.dma_chan->cookie, 786 &state); 787 if (status != DMA_IN_PROGRESS) 788 return 0; 789 790 /* Transferred length is size in bytes from end of buffer */ 791 i = st->dma_st.rx_buf_sz - state.residue; 792 793 /* Return available bytes */ 794 if (i >= st->dma_st.buf_idx) 795 size = i - st->dma_st.buf_idx; 796 else 797 size = st->dma_st.rx_buf_sz + i - st->dma_st.buf_idx; 798 return size; 799 } 800 801 static void at91_dma_buffer_done(void *data) 802 { 803 struct iio_dev *indio_dev = data; 804 805 iio_trigger_poll_chained(indio_dev->trig); 806 } 807 808 static int at91_adc_dma_start(struct iio_dev *indio_dev) 809 { 810 struct at91_adc_state *st = iio_priv(indio_dev); 811 struct dma_async_tx_descriptor *desc; 812 dma_cookie_t cookie; 813 int ret; 814 u8 bit; 815 816 if (!st->dma_st.dma_chan) 817 return 0; 818 819 /* we start a new DMA, so set buffer index to start */ 820 st->dma_st.buf_idx = 0; 821 822 /* 823 * compute buffer size w.r.t. watermark and enabled channels. 824 * scan_bytes is aligned so we need an exact size for DMA 825 */ 826 st->dma_st.rx_buf_sz = 0; 827 828 for_each_set_bit(bit, indio_dev->active_scan_mask, 829 indio_dev->num_channels) { 830 struct iio_chan_spec const *chan = 831 at91_adc_chan_get(indio_dev, bit); 832 833 if (!chan) 834 continue; 835 836 st->dma_st.rx_buf_sz += chan->scan_type.storagebits / 8; 837 } 838 st->dma_st.rx_buf_sz *= st->dma_st.watermark; 839 840 /* Prepare a DMA cyclic transaction */ 841 desc = dmaengine_prep_dma_cyclic(st->dma_st.dma_chan, 842 st->dma_st.rx_dma_buf, 843 st->dma_st.rx_buf_sz, 844 st->dma_st.rx_buf_sz / 2, 845 DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); 846 847 if (!desc) { 848 dev_err(&indio_dev->dev, "cannot prepare DMA cyclic\n"); 849 return -EBUSY; 850 } 851 852 desc->callback = at91_dma_buffer_done; 853 desc->callback_param = indio_dev; 854 855 cookie = dmaengine_submit(desc); 856 ret = dma_submit_error(cookie); 857 if (ret) { 858 dev_err(&indio_dev->dev, "cannot submit DMA cyclic\n"); 859 dmaengine_terminate_async(st->dma_st.dma_chan); 860 return ret; 861 } 862 863 /* enable general overrun error signaling */ 864 at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_GOVRE); 865 /* Issue pending DMA requests */ 866 dma_async_issue_pending(st->dma_st.dma_chan); 867 868 /* consider current time as DMA start time for timestamps */ 869 st->dma_st.dma_ts = iio_get_time_ns(indio_dev); 870 871 dev_dbg(&indio_dev->dev, "DMA cyclic started\n"); 872 873 return 0; 874 } 875 876 static int at91_adc_buffer_postenable(struct iio_dev *indio_dev) 877 { 878 int ret; 879 struct at91_adc_state *st = iio_priv(indio_dev); 880 881 /* check if we are enabling triggered buffer or the touchscreen */ 882 if (bitmap_subset(indio_dev->active_scan_mask, 883 &st->touch_st.channels_bitmask, 884 AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { 885 /* touchscreen enabling */ 886 return at91_adc_configure_touch(st, true); 887 } 888 /* if we are not in triggered mode, we cannot enable the buffer. */ 889 if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES)) 890 return -EINVAL; 891 892 /* we continue with the triggered buffer */ 893 ret = at91_adc_dma_start(indio_dev); 894 if (ret) { 895 dev_err(&indio_dev->dev, "buffer postenable failed\n"); 896 return ret; 897 } 898 899 return iio_triggered_buffer_postenable(indio_dev); 900 } 901 902 static int at91_adc_buffer_predisable(struct iio_dev *indio_dev) 903 { 904 struct at91_adc_state *st = iio_priv(indio_dev); 905 int ret; 906 u8 bit; 907 908 /* check if we are disabling triggered buffer or the touchscreen */ 909 if (bitmap_subset(indio_dev->active_scan_mask, 910 &st->touch_st.channels_bitmask, 911 AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { 912 /* touchscreen disable */ 913 return at91_adc_configure_touch(st, false); 914 } 915 /* if we are not in triggered mode, nothing to do here */ 916 if (!(indio_dev->currentmode & INDIO_ALL_TRIGGERED_MODES)) 917 return -EINVAL; 918 919 /* continue with the triggered buffer */ 920 ret = iio_triggered_buffer_predisable(indio_dev); 921 if (ret < 0) 922 dev_err(&indio_dev->dev, "buffer predisable failed\n"); 923 924 if (!st->dma_st.dma_chan) 925 return ret; 926 927 /* if we are using DMA we must clear registers and end DMA */ 928 dmaengine_terminate_sync(st->dma_st.dma_chan); 929 930 /* 931 * For each enabled channel we must read the last converted value 932 * to clear EOC status and not get a possible interrupt later. 933 * This value is being read by DMA from LCDR anyway 934 */ 935 for_each_set_bit(bit, indio_dev->active_scan_mask, 936 indio_dev->num_channels) { 937 struct iio_chan_spec const *chan = 938 at91_adc_chan_get(indio_dev, bit); 939 940 if (!chan) 941 continue; 942 /* these channel types are virtual, no need to do anything */ 943 if (chan->type == IIO_POSITIONRELATIVE || 944 chan->type == IIO_PRESSURE) 945 continue; 946 if (st->dma_st.dma_chan) 947 at91_adc_readl(st, chan->address); 948 } 949 950 /* read overflow register to clear possible overflow status */ 951 at91_adc_readl(st, AT91_SAMA5D2_OVER); 952 return ret; 953 } 954 955 static const struct iio_buffer_setup_ops at91_buffer_setup_ops = { 956 .postenable = &at91_adc_buffer_postenable, 957 .predisable = &at91_adc_buffer_predisable, 958 }; 959 960 static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *indio, 961 char *trigger_name) 962 { 963 struct iio_trigger *trig; 964 int ret; 965 966 trig = devm_iio_trigger_alloc(&indio->dev, "%s-dev%d-%s", indio->name, 967 indio->id, trigger_name); 968 if (!trig) 969 return NULL; 970 971 trig->dev.parent = indio->dev.parent; 972 iio_trigger_set_drvdata(trig, indio); 973 trig->ops = &at91_adc_trigger_ops; 974 975 ret = devm_iio_trigger_register(&indio->dev, trig); 976 if (ret) 977 return ERR_PTR(ret); 978 979 return trig; 980 } 981 982 static int at91_adc_trigger_init(struct iio_dev *indio) 983 { 984 struct at91_adc_state *st = iio_priv(indio); 985 986 st->trig = at91_adc_allocate_trigger(indio, st->selected_trig->name); 987 if (IS_ERR(st->trig)) { 988 dev_err(&indio->dev, 989 "could not allocate trigger\n"); 990 return PTR_ERR(st->trig); 991 } 992 993 return 0; 994 } 995 996 static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev, 997 struct iio_poll_func *pf) 998 { 999 struct at91_adc_state *st = iio_priv(indio_dev); 1000 int i = 0; 1001 int val; 1002 u8 bit; 1003 1004 for_each_set_bit(bit, indio_dev->active_scan_mask, 1005 indio_dev->num_channels) { 1006 struct iio_chan_spec const *chan = 1007 at91_adc_chan_get(indio_dev, bit); 1008 1009 if (!chan) 1010 continue; 1011 /* 1012 * Our external trigger only supports the voltage channels. 1013 * In case someone requested a different type of channel 1014 * just put zeroes to buffer. 1015 * This should not happen because we check the scan mode 1016 * and scan mask when we enable the buffer, and we don't allow 1017 * the buffer to start with a mixed mask (voltage and something 1018 * else). 1019 * Thus, emit a warning. 1020 */ 1021 if (chan->type == IIO_VOLTAGE) { 1022 val = at91_adc_readl(st, chan->address); 1023 at91_adc_adjust_val_osr(st, &val); 1024 st->buffer[i] = val; 1025 } else { 1026 st->buffer[i] = 0; 1027 WARN(true, "This trigger cannot handle this type of channel"); 1028 } 1029 i++; 1030 } 1031 iio_push_to_buffers_with_timestamp(indio_dev, st->buffer, 1032 pf->timestamp); 1033 } 1034 1035 static void at91_adc_trigger_handler_dma(struct iio_dev *indio_dev) 1036 { 1037 struct at91_adc_state *st = iio_priv(indio_dev); 1038 int transferred_len = at91_adc_dma_size_done(st); 1039 s64 ns = iio_get_time_ns(indio_dev); 1040 s64 interval; 1041 int sample_index = 0, sample_count, sample_size; 1042 1043 u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR); 1044 /* if we reached this point, we cannot sample faster */ 1045 if (status & AT91_SAMA5D2_IER_GOVRE) 1046 pr_info_ratelimited("%s: conversion overrun detected\n", 1047 indio_dev->name); 1048 1049 sample_size = div_s64(st->dma_st.rx_buf_sz, st->dma_st.watermark); 1050 1051 sample_count = div_s64(transferred_len, sample_size); 1052 1053 /* 1054 * interval between samples is total time since last transfer handling 1055 * divided by the number of samples (total size divided by sample size) 1056 */ 1057 interval = div_s64((ns - st->dma_st.dma_ts), sample_count); 1058 1059 while (transferred_len >= sample_size) { 1060 /* 1061 * for all the values in the current sample, 1062 * adjust the values inside the buffer for oversampling 1063 */ 1064 at91_adc_adjust_val_osr_array(st, 1065 &st->dma_st.rx_buf[st->dma_st.buf_idx], 1066 sample_size); 1067 1068 iio_push_to_buffers_with_timestamp(indio_dev, 1069 (st->dma_st.rx_buf + st->dma_st.buf_idx), 1070 (st->dma_st.dma_ts + interval * sample_index)); 1071 /* adjust remaining length */ 1072 transferred_len -= sample_size; 1073 /* adjust buffer index */ 1074 st->dma_st.buf_idx += sample_size; 1075 /* in case of reaching end of buffer, reset index */ 1076 if (st->dma_st.buf_idx >= st->dma_st.rx_buf_sz) 1077 st->dma_st.buf_idx = 0; 1078 sample_index++; 1079 } 1080 /* adjust saved time for next transfer handling */ 1081 st->dma_st.dma_ts = iio_get_time_ns(indio_dev); 1082 } 1083 1084 static irqreturn_t at91_adc_trigger_handler(int irq, void *p) 1085 { 1086 struct iio_poll_func *pf = p; 1087 struct iio_dev *indio_dev = pf->indio_dev; 1088 struct at91_adc_state *st = iio_priv(indio_dev); 1089 1090 if (st->dma_st.dma_chan) 1091 at91_adc_trigger_handler_dma(indio_dev); 1092 else 1093 at91_adc_trigger_handler_nodma(indio_dev, pf); 1094 1095 iio_trigger_notify_done(indio_dev->trig); 1096 1097 return IRQ_HANDLED; 1098 } 1099 1100 static int at91_adc_buffer_init(struct iio_dev *indio) 1101 { 1102 struct at91_adc_state *st = iio_priv(indio); 1103 1104 if (st->selected_trig->hw_trig) { 1105 return devm_iio_triggered_buffer_setup(&indio->dev, indio, 1106 &iio_pollfunc_store_time, 1107 &at91_adc_trigger_handler, &at91_buffer_setup_ops); 1108 } 1109 /* 1110 * we need to prepare the buffer ops in case we will get 1111 * another buffer attached (like a callback buffer for the touchscreen) 1112 */ 1113 indio->setup_ops = &at91_buffer_setup_ops; 1114 1115 return 0; 1116 } 1117 1118 static unsigned at91_adc_startup_time(unsigned startup_time_min, 1119 unsigned adc_clk_khz) 1120 { 1121 static const unsigned int startup_lookup[] = { 1122 0, 8, 16, 24, 1123 64, 80, 96, 112, 1124 512, 576, 640, 704, 1125 768, 832, 896, 960 1126 }; 1127 unsigned ticks_min, i; 1128 1129 /* 1130 * Since the adc frequency is checked before, there is no reason 1131 * to not meet the startup time constraint. 1132 */ 1133 1134 ticks_min = startup_time_min * adc_clk_khz / 1000; 1135 for (i = 0; i < ARRAY_SIZE(startup_lookup); i++) 1136 if (startup_lookup[i] > ticks_min) 1137 break; 1138 1139 return i; 1140 } 1141 1142 static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq) 1143 { 1144 struct iio_dev *indio_dev = iio_priv_to_dev(st); 1145 unsigned f_per, prescal, startup, mr; 1146 1147 f_per = clk_get_rate(st->per_clk); 1148 prescal = (f_per / (2 * freq)) - 1; 1149 1150 startup = at91_adc_startup_time(st->soc_info.startup_time, 1151 freq / 1000); 1152 1153 mr = at91_adc_readl(st, AT91_SAMA5D2_MR); 1154 mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK); 1155 mr |= AT91_SAMA5D2_MR_STARTUP(startup); 1156 mr |= AT91_SAMA5D2_MR_PRESCAL(prescal); 1157 at91_adc_writel(st, AT91_SAMA5D2_MR, mr); 1158 1159 dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", 1160 freq, startup, prescal); 1161 st->current_sample_rate = freq; 1162 } 1163 1164 static inline unsigned at91_adc_get_sample_freq(struct at91_adc_state *st) 1165 { 1166 return st->current_sample_rate; 1167 } 1168 1169 static void at91_adc_touch_data_handler(struct iio_dev *indio_dev) 1170 { 1171 struct at91_adc_state *st = iio_priv(indio_dev); 1172 u8 bit; 1173 u16 val; 1174 int i = 0; 1175 1176 for_each_set_bit(bit, indio_dev->active_scan_mask, 1177 AT91_SAMA5D2_MAX_CHAN_IDX + 1) { 1178 struct iio_chan_spec const *chan = 1179 at91_adc_chan_get(indio_dev, bit); 1180 1181 if (chan->type == IIO_POSITIONRELATIVE) 1182 at91_adc_read_position(st, chan->channel, &val); 1183 else if (chan->type == IIO_PRESSURE) 1184 at91_adc_read_pressure(st, chan->channel, &val); 1185 else 1186 continue; 1187 st->buffer[i] = val; 1188 i++; 1189 } 1190 /* 1191 * Schedule work to push to buffers. 1192 * This is intended to push to the callback buffer that another driver 1193 * registered. We are still in a handler from our IRQ. If we push 1194 * directly, it means the other driver has it's callback called 1195 * from our IRQ context. Which is something we better avoid. 1196 * Let's schedule it after our IRQ is completed. 1197 */ 1198 schedule_work(&st->touch_st.workq); 1199 } 1200 1201 static void at91_adc_pen_detect_interrupt(struct at91_adc_state *st) 1202 { 1203 at91_adc_writel(st, AT91_SAMA5D2_IDR, AT91_SAMA5D2_IER_PEN); 1204 at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_NOPEN | 1205 AT91_SAMA5D2_IER_XRDY | AT91_SAMA5D2_IER_YRDY | 1206 AT91_SAMA5D2_IER_PRDY); 1207 at91_adc_writel(st, AT91_SAMA5D2_TRGR, 1208 AT91_SAMA5D2_TRGR_TRGMOD_PERIODIC | 1209 AT91_SAMA5D2_TRGR_TRGPER(st->touch_st.sample_period_val)); 1210 st->touch_st.touching = true; 1211 } 1212 1213 static void at91_adc_no_pen_detect_interrupt(struct at91_adc_state *st) 1214 { 1215 struct iio_dev *indio_dev = iio_priv_to_dev(st); 1216 1217 at91_adc_writel(st, AT91_SAMA5D2_TRGR, 1218 AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER); 1219 at91_adc_writel(st, AT91_SAMA5D2_IDR, AT91_SAMA5D2_IER_NOPEN | 1220 AT91_SAMA5D2_IER_XRDY | AT91_SAMA5D2_IER_YRDY | 1221 AT91_SAMA5D2_IER_PRDY); 1222 st->touch_st.touching = false; 1223 1224 at91_adc_touch_data_handler(indio_dev); 1225 1226 at91_adc_writel(st, AT91_SAMA5D2_IER, AT91_SAMA5D2_IER_PEN); 1227 } 1228 1229 static void at91_adc_workq_handler(struct work_struct *workq) 1230 { 1231 struct at91_adc_touch *touch_st = container_of(workq, 1232 struct at91_adc_touch, workq); 1233 struct at91_adc_state *st = container_of(touch_st, 1234 struct at91_adc_state, touch_st); 1235 struct iio_dev *indio_dev = iio_priv_to_dev(st); 1236 1237 iio_push_to_buffers(indio_dev, st->buffer); 1238 } 1239 1240 static irqreturn_t at91_adc_interrupt(int irq, void *private) 1241 { 1242 struct iio_dev *indio = private; 1243 struct at91_adc_state *st = iio_priv(indio); 1244 u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR); 1245 u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR); 1246 u32 rdy_mask = AT91_SAMA5D2_IER_XRDY | AT91_SAMA5D2_IER_YRDY | 1247 AT91_SAMA5D2_IER_PRDY; 1248 1249 if (!(status & imr)) 1250 return IRQ_NONE; 1251 if (status & AT91_SAMA5D2_IER_PEN) { 1252 /* pen detected IRQ */ 1253 at91_adc_pen_detect_interrupt(st); 1254 } else if ((status & AT91_SAMA5D2_IER_NOPEN)) { 1255 /* nopen detected IRQ */ 1256 at91_adc_no_pen_detect_interrupt(st); 1257 } else if ((status & AT91_SAMA5D2_ISR_PENS) && 1258 ((status & rdy_mask) == rdy_mask)) { 1259 /* periodic trigger IRQ - during pen sense */ 1260 at91_adc_touch_data_handler(indio); 1261 } else if (status & AT91_SAMA5D2_ISR_PENS) { 1262 /* 1263 * touching, but the measurements are not ready yet. 1264 * read and ignore. 1265 */ 1266 status = at91_adc_readl(st, AT91_SAMA5D2_XPOSR); 1267 status = at91_adc_readl(st, AT91_SAMA5D2_YPOSR); 1268 status = at91_adc_readl(st, AT91_SAMA5D2_PRESSR); 1269 } else if (iio_buffer_enabled(indio) && !st->dma_st.dma_chan) { 1270 /* triggered buffer without DMA */ 1271 disable_irq_nosync(irq); 1272 iio_trigger_poll(indio->trig); 1273 } else if (iio_buffer_enabled(indio) && st->dma_st.dma_chan) { 1274 /* triggered buffer with DMA - should not happen */ 1275 disable_irq_nosync(irq); 1276 WARN(true, "Unexpected irq occurred\n"); 1277 } else if (!iio_buffer_enabled(indio)) { 1278 /* software requested conversion */ 1279 st->conversion_value = at91_adc_readl(st, st->chan->address); 1280 st->conversion_done = true; 1281 wake_up_interruptible(&st->wq_data_available); 1282 } 1283 return IRQ_HANDLED; 1284 } 1285 1286 static int at91_adc_read_info_raw(struct iio_dev *indio_dev, 1287 struct iio_chan_spec const *chan, int *val) 1288 { 1289 struct at91_adc_state *st = iio_priv(indio_dev); 1290 u32 cor = 0; 1291 u16 tmp_val; 1292 int ret; 1293 1294 /* 1295 * Keep in mind that we cannot use software trigger or touchscreen 1296 * if external trigger is enabled 1297 */ 1298 if (chan->type == IIO_POSITIONRELATIVE) { 1299 ret = iio_device_claim_direct_mode(indio_dev); 1300 if (ret) 1301 return ret; 1302 mutex_lock(&st->lock); 1303 1304 ret = at91_adc_read_position(st, chan->channel, 1305 &tmp_val); 1306 *val = tmp_val; 1307 mutex_unlock(&st->lock); 1308 iio_device_release_direct_mode(indio_dev); 1309 1310 return at91_adc_adjust_val_osr(st, val); 1311 } 1312 if (chan->type == IIO_PRESSURE) { 1313 ret = iio_device_claim_direct_mode(indio_dev); 1314 if (ret) 1315 return ret; 1316 mutex_lock(&st->lock); 1317 1318 ret = at91_adc_read_pressure(st, chan->channel, 1319 &tmp_val); 1320 *val = tmp_val; 1321 mutex_unlock(&st->lock); 1322 iio_device_release_direct_mode(indio_dev); 1323 1324 return at91_adc_adjust_val_osr(st, val); 1325 } 1326 1327 /* in this case we have a voltage channel */ 1328 1329 ret = iio_device_claim_direct_mode(indio_dev); 1330 if (ret) 1331 return ret; 1332 mutex_lock(&st->lock); 1333 1334 st->chan = chan; 1335 1336 if (chan->differential) 1337 cor = (BIT(chan->channel) | BIT(chan->channel2)) << 1338 AT91_SAMA5D2_COR_DIFF_OFFSET; 1339 1340 at91_adc_writel(st, AT91_SAMA5D2_COR, cor); 1341 at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); 1342 at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel)); 1343 at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START); 1344 1345 ret = wait_event_interruptible_timeout(st->wq_data_available, 1346 st->conversion_done, 1347 msecs_to_jiffies(1000)); 1348 if (ret == 0) 1349 ret = -ETIMEDOUT; 1350 1351 if (ret > 0) { 1352 *val = st->conversion_value; 1353 ret = at91_adc_adjust_val_osr(st, val); 1354 if (chan->scan_type.sign == 's') 1355 *val = sign_extend32(*val, 11); 1356 st->conversion_done = false; 1357 } 1358 1359 at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel)); 1360 at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel)); 1361 1362 /* Needed to ACK the DRDY interruption */ 1363 at91_adc_readl(st, AT91_SAMA5D2_LCDR); 1364 1365 mutex_unlock(&st->lock); 1366 1367 iio_device_release_direct_mode(indio_dev); 1368 return ret; 1369 } 1370 1371 static int at91_adc_read_raw(struct iio_dev *indio_dev, 1372 struct iio_chan_spec const *chan, 1373 int *val, int *val2, long mask) 1374 { 1375 struct at91_adc_state *st = iio_priv(indio_dev); 1376 1377 switch (mask) { 1378 case IIO_CHAN_INFO_RAW: 1379 return at91_adc_read_info_raw(indio_dev, chan, val); 1380 case IIO_CHAN_INFO_SCALE: 1381 *val = st->vref_uv / 1000; 1382 if (chan->differential) 1383 *val *= 2; 1384 *val2 = chan->scan_type.realbits; 1385 return IIO_VAL_FRACTIONAL_LOG2; 1386 1387 case IIO_CHAN_INFO_SAMP_FREQ: 1388 *val = at91_adc_get_sample_freq(st); 1389 return IIO_VAL_INT; 1390 1391 case IIO_CHAN_INFO_OVERSAMPLING_RATIO: 1392 *val = st->oversampling_ratio; 1393 return IIO_VAL_INT; 1394 1395 default: 1396 return -EINVAL; 1397 } 1398 } 1399 1400 static int at91_adc_write_raw(struct iio_dev *indio_dev, 1401 struct iio_chan_spec const *chan, 1402 int val, int val2, long mask) 1403 { 1404 struct at91_adc_state *st = iio_priv(indio_dev); 1405 1406 switch (mask) { 1407 case IIO_CHAN_INFO_OVERSAMPLING_RATIO: 1408 if ((val != AT91_OSR_1SAMPLES) && (val != AT91_OSR_4SAMPLES) && 1409 (val != AT91_OSR_16SAMPLES)) 1410 return -EINVAL; 1411 /* if no change, optimize out */ 1412 if (val == st->oversampling_ratio) 1413 return 0; 1414 st->oversampling_ratio = val; 1415 /* update ratio */ 1416 at91_adc_config_emr(st); 1417 return 0; 1418 case IIO_CHAN_INFO_SAMP_FREQ: 1419 if (val < st->soc_info.min_sample_rate || 1420 val > st->soc_info.max_sample_rate) 1421 return -EINVAL; 1422 1423 at91_adc_setup_samp_freq(st, val); 1424 return 0; 1425 default: 1426 return -EINVAL; 1427 }; 1428 } 1429 1430 static void at91_adc_dma_init(struct platform_device *pdev) 1431 { 1432 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 1433 struct at91_adc_state *st = iio_priv(indio_dev); 1434 struct dma_slave_config config = {0}; 1435 /* 1436 * We make the buffer double the size of the fifo, 1437 * such that DMA uses one half of the buffer (full fifo size) 1438 * and the software uses the other half to read/write. 1439 */ 1440 unsigned int pages = DIV_ROUND_UP(AT91_HWFIFO_MAX_SIZE * 1441 AT91_BUFFER_MAX_CONVERSION_BYTES * 2, 1442 PAGE_SIZE); 1443 1444 if (st->dma_st.dma_chan) 1445 return; 1446 1447 st->dma_st.dma_chan = dma_request_slave_channel(&pdev->dev, "rx"); 1448 1449 if (!st->dma_st.dma_chan) { 1450 dev_info(&pdev->dev, "can't get DMA channel\n"); 1451 goto dma_exit; 1452 } 1453 1454 st->dma_st.rx_buf = dma_alloc_coherent(st->dma_st.dma_chan->device->dev, 1455 pages * PAGE_SIZE, 1456 &st->dma_st.rx_dma_buf, 1457 GFP_KERNEL); 1458 if (!st->dma_st.rx_buf) { 1459 dev_info(&pdev->dev, "can't allocate coherent DMA area\n"); 1460 goto dma_chan_disable; 1461 } 1462 1463 /* Configure DMA channel to read data register */ 1464 config.direction = DMA_DEV_TO_MEM; 1465 config.src_addr = (phys_addr_t)(st->dma_st.phys_addr 1466 + AT91_SAMA5D2_LCDR); 1467 config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; 1468 config.src_maxburst = 1; 1469 config.dst_maxburst = 1; 1470 1471 if (dmaengine_slave_config(st->dma_st.dma_chan, &config)) { 1472 dev_info(&pdev->dev, "can't configure DMA slave\n"); 1473 goto dma_free_area; 1474 } 1475 1476 dev_info(&pdev->dev, "using %s for rx DMA transfers\n", 1477 dma_chan_name(st->dma_st.dma_chan)); 1478 1479 return; 1480 1481 dma_free_area: 1482 dma_free_coherent(st->dma_st.dma_chan->device->dev, pages * PAGE_SIZE, 1483 st->dma_st.rx_buf, st->dma_st.rx_dma_buf); 1484 dma_chan_disable: 1485 dma_release_channel(st->dma_st.dma_chan); 1486 st->dma_st.dma_chan = 0; 1487 dma_exit: 1488 dev_info(&pdev->dev, "continuing without DMA support\n"); 1489 } 1490 1491 static void at91_adc_dma_disable(struct platform_device *pdev) 1492 { 1493 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 1494 struct at91_adc_state *st = iio_priv(indio_dev); 1495 unsigned int pages = DIV_ROUND_UP(AT91_HWFIFO_MAX_SIZE * 1496 AT91_BUFFER_MAX_CONVERSION_BYTES * 2, 1497 PAGE_SIZE); 1498 1499 /* if we are not using DMA, just return */ 1500 if (!st->dma_st.dma_chan) 1501 return; 1502 1503 /* wait for all transactions to be terminated first*/ 1504 dmaengine_terminate_sync(st->dma_st.dma_chan); 1505 1506 dma_free_coherent(st->dma_st.dma_chan->device->dev, pages * PAGE_SIZE, 1507 st->dma_st.rx_buf, st->dma_st.rx_dma_buf); 1508 dma_release_channel(st->dma_st.dma_chan); 1509 st->dma_st.dma_chan = 0; 1510 1511 dev_info(&pdev->dev, "continuing without DMA support\n"); 1512 } 1513 1514 static int at91_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val) 1515 { 1516 struct at91_adc_state *st = iio_priv(indio_dev); 1517 1518 if (val > AT91_HWFIFO_MAX_SIZE) 1519 return -EINVAL; 1520 1521 if (!st->selected_trig->hw_trig) { 1522 dev_dbg(&indio_dev->dev, "we need hw trigger for DMA\n"); 1523 return 0; 1524 } 1525 1526 dev_dbg(&indio_dev->dev, "new watermark is %u\n", val); 1527 st->dma_st.watermark = val; 1528 1529 /* 1530 * The logic here is: if we have watermark 1, it means we do 1531 * each conversion with it's own IRQ, thus we don't need DMA. 1532 * If the watermark is higher, we do DMA to do all the transfers in bulk 1533 */ 1534 1535 if (val == 1) 1536 at91_adc_dma_disable(to_platform_device(&indio_dev->dev)); 1537 else if (val > 1) 1538 at91_adc_dma_init(to_platform_device(&indio_dev->dev)); 1539 1540 return 0; 1541 } 1542 1543 static int at91_adc_update_scan_mode(struct iio_dev *indio_dev, 1544 const unsigned long *scan_mask) 1545 { 1546 struct at91_adc_state *st = iio_priv(indio_dev); 1547 1548 if (bitmap_subset(scan_mask, &st->touch_st.channels_bitmask, 1549 AT91_SAMA5D2_MAX_CHAN_IDX + 1)) 1550 return 0; 1551 /* 1552 * if the new bitmap is a combination of touchscreen and regular 1553 * channels, then we are not fine 1554 */ 1555 if (bitmap_intersects(&st->touch_st.channels_bitmask, scan_mask, 1556 AT91_SAMA5D2_MAX_CHAN_IDX + 1)) 1557 return -EINVAL; 1558 return 0; 1559 } 1560 1561 static void at91_adc_hw_init(struct at91_adc_state *st) 1562 { 1563 at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST); 1564 at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff); 1565 /* 1566 * Transfer field must be set to 2 according to the datasheet and 1567 * allows different analog settings for each channel. 1568 */ 1569 at91_adc_writel(st, AT91_SAMA5D2_MR, 1570 AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH); 1571 1572 at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate); 1573 1574 /* configure extended mode register */ 1575 at91_adc_config_emr(st); 1576 } 1577 1578 static ssize_t at91_adc_get_fifo_state(struct device *dev, 1579 struct device_attribute *attr, char *buf) 1580 { 1581 struct iio_dev *indio_dev = dev_get_drvdata(dev); 1582 struct at91_adc_state *st = iio_priv(indio_dev); 1583 1584 return scnprintf(buf, PAGE_SIZE, "%d\n", !!st->dma_st.dma_chan); 1585 } 1586 1587 static ssize_t at91_adc_get_watermark(struct device *dev, 1588 struct device_attribute *attr, char *buf) 1589 { 1590 struct iio_dev *indio_dev = dev_get_drvdata(dev); 1591 struct at91_adc_state *st = iio_priv(indio_dev); 1592 1593 return scnprintf(buf, PAGE_SIZE, "%d\n", st->dma_st.watermark); 1594 } 1595 1596 static IIO_DEVICE_ATTR(hwfifo_enabled, 0444, 1597 at91_adc_get_fifo_state, NULL, 0); 1598 static IIO_DEVICE_ATTR(hwfifo_watermark, 0444, 1599 at91_adc_get_watermark, NULL, 0); 1600 1601 static IIO_CONST_ATTR(hwfifo_watermark_min, "2"); 1602 static IIO_CONST_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR); 1603 1604 static IIO_CONST_ATTR(oversampling_ratio_available, 1605 __stringify(AT91_OSR_1SAMPLES) " " 1606 __stringify(AT91_OSR_4SAMPLES) " " 1607 __stringify(AT91_OSR_16SAMPLES)); 1608 1609 static struct attribute *at91_adc_attributes[] = { 1610 &iio_const_attr_oversampling_ratio_available.dev_attr.attr, 1611 NULL, 1612 }; 1613 1614 static const struct attribute_group at91_adc_attribute_group = { 1615 .attrs = at91_adc_attributes, 1616 }; 1617 1618 static const struct attribute *at91_adc_fifo_attributes[] = { 1619 &iio_const_attr_hwfifo_watermark_min.dev_attr.attr, 1620 &iio_const_attr_hwfifo_watermark_max.dev_attr.attr, 1621 &iio_dev_attr_hwfifo_watermark.dev_attr.attr, 1622 &iio_dev_attr_hwfifo_enabled.dev_attr.attr, 1623 NULL, 1624 }; 1625 1626 static const struct iio_info at91_adc_info = { 1627 .attrs = &at91_adc_attribute_group, 1628 .read_raw = &at91_adc_read_raw, 1629 .write_raw = &at91_adc_write_raw, 1630 .update_scan_mode = &at91_adc_update_scan_mode, 1631 .of_xlate = &at91_adc_of_xlate, 1632 .hwfifo_set_watermark = &at91_adc_set_watermark, 1633 }; 1634 1635 static int at91_adc_probe(struct platform_device *pdev) 1636 { 1637 struct iio_dev *indio_dev; 1638 struct at91_adc_state *st; 1639 struct resource *res; 1640 int ret, i; 1641 u32 edge_type = IRQ_TYPE_NONE; 1642 1643 indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); 1644 if (!indio_dev) 1645 return -ENOMEM; 1646 1647 indio_dev->dev.parent = &pdev->dev; 1648 indio_dev->name = dev_name(&pdev->dev); 1649 indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; 1650 indio_dev->info = &at91_adc_info; 1651 indio_dev->channels = at91_adc_channels; 1652 indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels); 1653 1654 st = iio_priv(indio_dev); 1655 1656 bitmap_set(&st->touch_st.channels_bitmask, 1657 AT91_SAMA5D2_TOUCH_X_CHAN_IDX, 1); 1658 bitmap_set(&st->touch_st.channels_bitmask, 1659 AT91_SAMA5D2_TOUCH_Y_CHAN_IDX, 1); 1660 bitmap_set(&st->touch_st.channels_bitmask, 1661 AT91_SAMA5D2_TOUCH_P_CHAN_IDX, 1); 1662 1663 st->oversampling_ratio = AT91_OSR_1SAMPLES; 1664 1665 ret = of_property_read_u32(pdev->dev.of_node, 1666 "atmel,min-sample-rate-hz", 1667 &st->soc_info.min_sample_rate); 1668 if (ret) { 1669 dev_err(&pdev->dev, 1670 "invalid or missing value for atmel,min-sample-rate-hz\n"); 1671 return ret; 1672 } 1673 1674 ret = of_property_read_u32(pdev->dev.of_node, 1675 "atmel,max-sample-rate-hz", 1676 &st->soc_info.max_sample_rate); 1677 if (ret) { 1678 dev_err(&pdev->dev, 1679 "invalid or missing value for atmel,max-sample-rate-hz\n"); 1680 return ret; 1681 } 1682 1683 ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms", 1684 &st->soc_info.startup_time); 1685 if (ret) { 1686 dev_err(&pdev->dev, 1687 "invalid or missing value for atmel,startup-time-ms\n"); 1688 return ret; 1689 } 1690 1691 ret = of_property_read_u32(pdev->dev.of_node, 1692 "atmel,trigger-edge-type", &edge_type); 1693 if (ret) { 1694 dev_dbg(&pdev->dev, 1695 "atmel,trigger-edge-type not specified, only software trigger available\n"); 1696 } 1697 1698 st->selected_trig = NULL; 1699 1700 /* find the right trigger, or no trigger at all */ 1701 for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++) 1702 if (at91_adc_trigger_list[i].edge_type == edge_type) { 1703 st->selected_trig = &at91_adc_trigger_list[i]; 1704 break; 1705 } 1706 1707 if (!st->selected_trig) { 1708 dev_err(&pdev->dev, "invalid external trigger edge value\n"); 1709 return -EINVAL; 1710 } 1711 1712 init_waitqueue_head(&st->wq_data_available); 1713 mutex_init(&st->lock); 1714 INIT_WORK(&st->touch_st.workq, at91_adc_workq_handler); 1715 1716 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1717 if (!res) 1718 return -EINVAL; 1719 1720 /* if we plan to use DMA, we need the physical address of the regs */ 1721 st->dma_st.phys_addr = res->start; 1722 1723 st->base = devm_ioremap_resource(&pdev->dev, res); 1724 if (IS_ERR(st->base)) 1725 return PTR_ERR(st->base); 1726 1727 st->irq = platform_get_irq(pdev, 0); 1728 if (st->irq <= 0) { 1729 if (!st->irq) 1730 st->irq = -ENXIO; 1731 1732 return st->irq; 1733 } 1734 1735 st->per_clk = devm_clk_get(&pdev->dev, "adc_clk"); 1736 if (IS_ERR(st->per_clk)) 1737 return PTR_ERR(st->per_clk); 1738 1739 st->reg = devm_regulator_get(&pdev->dev, "vddana"); 1740 if (IS_ERR(st->reg)) 1741 return PTR_ERR(st->reg); 1742 1743 st->vref = devm_regulator_get(&pdev->dev, "vref"); 1744 if (IS_ERR(st->vref)) 1745 return PTR_ERR(st->vref); 1746 1747 ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0, 1748 pdev->dev.driver->name, indio_dev); 1749 if (ret) 1750 return ret; 1751 1752 ret = regulator_enable(st->reg); 1753 if (ret) 1754 return ret; 1755 1756 ret = regulator_enable(st->vref); 1757 if (ret) 1758 goto reg_disable; 1759 1760 st->vref_uv = regulator_get_voltage(st->vref); 1761 if (st->vref_uv <= 0) { 1762 ret = -EINVAL; 1763 goto vref_disable; 1764 } 1765 1766 at91_adc_hw_init(st); 1767 1768 ret = clk_prepare_enable(st->per_clk); 1769 if (ret) 1770 goto vref_disable; 1771 1772 platform_set_drvdata(pdev, indio_dev); 1773 1774 ret = at91_adc_buffer_init(indio_dev); 1775 if (ret < 0) { 1776 dev_err(&pdev->dev, "couldn't initialize the buffer.\n"); 1777 goto per_clk_disable_unprepare; 1778 } 1779 1780 if (st->selected_trig->hw_trig) { 1781 ret = at91_adc_trigger_init(indio_dev); 1782 if (ret < 0) { 1783 dev_err(&pdev->dev, "couldn't setup the triggers.\n"); 1784 goto per_clk_disable_unprepare; 1785 } 1786 /* 1787 * Initially the iio buffer has a length of 2 and 1788 * a watermark of 1 1789 */ 1790 st->dma_st.watermark = 1; 1791 1792 iio_buffer_set_attrs(indio_dev->buffer, 1793 at91_adc_fifo_attributes); 1794 } 1795 1796 if (dma_coerce_mask_and_coherent(&indio_dev->dev, DMA_BIT_MASK(32))) 1797 dev_info(&pdev->dev, "cannot set DMA mask to 32-bit\n"); 1798 1799 ret = iio_device_register(indio_dev); 1800 if (ret < 0) 1801 goto dma_disable; 1802 1803 if (st->selected_trig->hw_trig) 1804 dev_info(&pdev->dev, "setting up trigger as %s\n", 1805 st->selected_trig->name); 1806 1807 dev_info(&pdev->dev, "version: %x\n", 1808 readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); 1809 1810 return 0; 1811 1812 dma_disable: 1813 at91_adc_dma_disable(pdev); 1814 per_clk_disable_unprepare: 1815 clk_disable_unprepare(st->per_clk); 1816 vref_disable: 1817 regulator_disable(st->vref); 1818 reg_disable: 1819 regulator_disable(st->reg); 1820 return ret; 1821 } 1822 1823 static int at91_adc_remove(struct platform_device *pdev) 1824 { 1825 struct iio_dev *indio_dev = platform_get_drvdata(pdev); 1826 struct at91_adc_state *st = iio_priv(indio_dev); 1827 1828 iio_device_unregister(indio_dev); 1829 1830 at91_adc_dma_disable(pdev); 1831 1832 clk_disable_unprepare(st->per_clk); 1833 1834 regulator_disable(st->vref); 1835 regulator_disable(st->reg); 1836 1837 return 0; 1838 } 1839 1840 static __maybe_unused int at91_adc_suspend(struct device *dev) 1841 { 1842 struct iio_dev *indio_dev = dev_get_drvdata(dev); 1843 struct at91_adc_state *st = iio_priv(indio_dev); 1844 1845 /* 1846 * Do a sofware reset of the ADC before we go to suspend. 1847 * this will ensure that all pins are free from being muxed by the ADC 1848 * and can be used by for other devices. 1849 * Otherwise, ADC will hog them and we can't go to suspend mode. 1850 */ 1851 at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST); 1852 1853 clk_disable_unprepare(st->per_clk); 1854 regulator_disable(st->vref); 1855 regulator_disable(st->reg); 1856 1857 return pinctrl_pm_select_sleep_state(dev); 1858 } 1859 1860 static __maybe_unused int at91_adc_resume(struct device *dev) 1861 { 1862 struct iio_dev *indio_dev = dev_get_drvdata(dev); 1863 struct at91_adc_state *st = iio_priv(indio_dev); 1864 int ret; 1865 1866 ret = pinctrl_pm_select_default_state(dev); 1867 if (ret) 1868 goto resume_failed; 1869 1870 ret = regulator_enable(st->reg); 1871 if (ret) 1872 goto resume_failed; 1873 1874 ret = regulator_enable(st->vref); 1875 if (ret) 1876 goto reg_disable_resume; 1877 1878 ret = clk_prepare_enable(st->per_clk); 1879 if (ret) 1880 goto vref_disable_resume; 1881 1882 at91_adc_hw_init(st); 1883 1884 /* reconfiguring trigger hardware state */ 1885 if (!iio_buffer_enabled(indio_dev)) 1886 return 0; 1887 1888 /* check if we are enabling triggered buffer or the touchscreen */ 1889 if (bitmap_subset(indio_dev->active_scan_mask, 1890 &st->touch_st.channels_bitmask, 1891 AT91_SAMA5D2_MAX_CHAN_IDX + 1)) { 1892 /* touchscreen enabling */ 1893 return at91_adc_configure_touch(st, true); 1894 } else { 1895 return at91_adc_configure_trigger(st->trig, true); 1896 } 1897 1898 /* not needed but more explicit */ 1899 return 0; 1900 1901 vref_disable_resume: 1902 regulator_disable(st->vref); 1903 reg_disable_resume: 1904 regulator_disable(st->reg); 1905 resume_failed: 1906 dev_err(&indio_dev->dev, "failed to resume\n"); 1907 return ret; 1908 } 1909 1910 static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume); 1911 1912 static const struct of_device_id at91_adc_dt_match[] = { 1913 { 1914 .compatible = "atmel,sama5d2-adc", 1915 }, { 1916 /* sentinel */ 1917 } 1918 }; 1919 MODULE_DEVICE_TABLE(of, at91_adc_dt_match); 1920 1921 static struct platform_driver at91_adc_driver = { 1922 .probe = at91_adc_probe, 1923 .remove = at91_adc_remove, 1924 .driver = { 1925 .name = "at91-sama5d2_adc", 1926 .of_match_table = at91_adc_dt_match, 1927 .pm = &at91_adc_pm_ops, 1928 }, 1929 }; 1930 module_platform_driver(at91_adc_driver) 1931 1932 MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>"); 1933 MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC"); 1934 MODULE_LICENSE("GPL v2"); 1935