1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * AD7904/AD7914/AD7923/AD7924/AD7908/AD7918/AD7928 SPI ADC driver 4 * 5 * Copyright 2011 Analog Devices Inc (from AD7923 Driver) 6 * Copyright 2012 CS Systemes d'Information 7 */ 8 9 #include <linux/device.h> 10 #include <linux/kernel.h> 11 #include <linux/slab.h> 12 #include <linux/sysfs.h> 13 #include <linux/spi/spi.h> 14 #include <linux/regulator/consumer.h> 15 #include <linux/err.h> 16 #include <linux/delay.h> 17 #include <linux/module.h> 18 #include <linux/interrupt.h> 19 20 #include <linux/iio/iio.h> 21 #include <linux/iio/sysfs.h> 22 #include <linux/iio/buffer.h> 23 #include <linux/iio/trigger_consumer.h> 24 #include <linux/iio/triggered_buffer.h> 25 26 #define AD7923_WRITE_CR BIT(11) /* write control register */ 27 #define AD7923_RANGE BIT(1) /* range to REFin */ 28 #define AD7923_CODING BIT(0) /* coding is straight binary */ 29 #define AD7923_PM_MODE_AS (1) /* auto shutdown */ 30 #define AD7923_PM_MODE_FS (2) /* full shutdown */ 31 #define AD7923_PM_MODE_OPS (3) /* normal operation */ 32 #define AD7923_SEQUENCE_OFF (0) /* no sequence fonction */ 33 #define AD7923_SEQUENCE_PROTECT (2) /* no interrupt write cycle */ 34 #define AD7923_SEQUENCE_ON (3) /* continuous sequence */ 35 36 37 #define AD7923_PM_MODE_WRITE(mode) ((mode) << 4) /* write mode */ 38 #define AD7923_CHANNEL_WRITE(channel) ((channel) << 6) /* write channel */ 39 #define AD7923_SEQUENCE_WRITE(sequence) ((((sequence) & 1) << 3) \ 40 + (((sequence) & 2) << 9)) 41 /* write sequence fonction */ 42 /* left shift for CR : bit 11 transmit in first */ 43 #define AD7923_SHIFT_REGISTER 4 44 45 /* val = value, dec = left shift, bits = number of bits of the mask */ 46 #define EXTRACT(val, dec, bits) (((val) >> (dec)) & ((1 << (bits)) - 1)) 47 48 struct ad7923_state { 49 struct spi_device *spi; 50 struct spi_transfer ring_xfer[5]; 51 struct spi_transfer scan_single_xfer[2]; 52 struct spi_message ring_msg; 53 struct spi_message scan_single_msg; 54 55 struct regulator *reg; 56 57 unsigned int settings; 58 59 /* 60 * DMA (thus cache coherency maintenance) requires the 61 * transfer buffers to live in their own cache lines. 62 */ 63 __be16 rx_buf[4] ____cacheline_aligned; 64 __be16 tx_buf[4]; 65 }; 66 67 struct ad7923_chip_info { 68 const struct iio_chan_spec *channels; 69 unsigned int num_channels; 70 }; 71 72 enum ad7923_id { 73 AD7904, 74 AD7914, 75 AD7924, 76 AD7908, 77 AD7918, 78 AD7928 79 }; 80 81 #define AD7923_V_CHAN(index, bits) \ 82 { \ 83 .type = IIO_VOLTAGE, \ 84 .indexed = 1, \ 85 .channel = index, \ 86 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ 87 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ 88 .address = index, \ 89 .scan_index = index, \ 90 .scan_type = { \ 91 .sign = 'u', \ 92 .realbits = (bits), \ 93 .storagebits = 16, \ 94 .endianness = IIO_BE, \ 95 }, \ 96 } 97 98 #define DECLARE_AD7923_CHANNELS(name, bits) \ 99 const struct iio_chan_spec name ## _channels[] = { \ 100 AD7923_V_CHAN(0, bits), \ 101 AD7923_V_CHAN(1, bits), \ 102 AD7923_V_CHAN(2, bits), \ 103 AD7923_V_CHAN(3, bits), \ 104 IIO_CHAN_SOFT_TIMESTAMP(4), \ 105 } 106 107 #define DECLARE_AD7908_CHANNELS(name, bits) \ 108 const struct iio_chan_spec name ## _channels[] = { \ 109 AD7923_V_CHAN(0, bits), \ 110 AD7923_V_CHAN(1, bits), \ 111 AD7923_V_CHAN(2, bits), \ 112 AD7923_V_CHAN(3, bits), \ 113 AD7923_V_CHAN(4, bits), \ 114 AD7923_V_CHAN(5, bits), \ 115 AD7923_V_CHAN(6, bits), \ 116 AD7923_V_CHAN(7, bits), \ 117 IIO_CHAN_SOFT_TIMESTAMP(8), \ 118 } 119 120 static DECLARE_AD7923_CHANNELS(ad7904, 8); 121 static DECLARE_AD7923_CHANNELS(ad7914, 10); 122 static DECLARE_AD7923_CHANNELS(ad7924, 12); 123 static DECLARE_AD7908_CHANNELS(ad7908, 8); 124 static DECLARE_AD7908_CHANNELS(ad7918, 10); 125 static DECLARE_AD7908_CHANNELS(ad7928, 12); 126 127 static const struct ad7923_chip_info ad7923_chip_info[] = { 128 [AD7904] = { 129 .channels = ad7904_channels, 130 .num_channels = ARRAY_SIZE(ad7904_channels), 131 }, 132 [AD7914] = { 133 .channels = ad7914_channels, 134 .num_channels = ARRAY_SIZE(ad7914_channels), 135 }, 136 [AD7924] = { 137 .channels = ad7924_channels, 138 .num_channels = ARRAY_SIZE(ad7924_channels), 139 }, 140 [AD7908] = { 141 .channels = ad7908_channels, 142 .num_channels = ARRAY_SIZE(ad7908_channels), 143 }, 144 [AD7918] = { 145 .channels = ad7918_channels, 146 .num_channels = ARRAY_SIZE(ad7918_channels), 147 }, 148 [AD7928] = { 149 .channels = ad7928_channels, 150 .num_channels = ARRAY_SIZE(ad7928_channels), 151 }, 152 }; 153 154 /** 155 * ad7923_update_scan_mode() setup the spi transfer buffer for the new scan mask 156 **/ 157 static int ad7923_update_scan_mode(struct iio_dev *indio_dev, 158 const unsigned long *active_scan_mask) 159 { 160 struct ad7923_state *st = iio_priv(indio_dev); 161 int i, cmd, len; 162 163 len = 0; 164 /* 165 * For this driver the last channel is always the software timestamp so 166 * skip that one. 167 */ 168 for_each_set_bit(i, active_scan_mask, indio_dev->num_channels - 1) { 169 cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(i) | 170 AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) | 171 st->settings; 172 cmd <<= AD7923_SHIFT_REGISTER; 173 st->tx_buf[len++] = cpu_to_be16(cmd); 174 } 175 /* build spi ring message */ 176 st->ring_xfer[0].tx_buf = &st->tx_buf[0]; 177 st->ring_xfer[0].len = len; 178 st->ring_xfer[0].cs_change = 1; 179 180 spi_message_init(&st->ring_msg); 181 spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg); 182 183 for (i = 0; i < len; i++) { 184 st->ring_xfer[i + 1].rx_buf = &st->rx_buf[i]; 185 st->ring_xfer[i + 1].len = 2; 186 st->ring_xfer[i + 1].cs_change = 1; 187 spi_message_add_tail(&st->ring_xfer[i + 1], &st->ring_msg); 188 } 189 /* make sure last transfer cs_change is not set */ 190 st->ring_xfer[i + 1].cs_change = 0; 191 192 return 0; 193 } 194 195 /** 196 * ad7923_trigger_handler() bh of trigger launched polling to ring buffer 197 * 198 * Currently there is no option in this driver to disable the saving of 199 * timestamps within the ring. 200 **/ 201 static irqreturn_t ad7923_trigger_handler(int irq, void *p) 202 { 203 struct iio_poll_func *pf = p; 204 struct iio_dev *indio_dev = pf->indio_dev; 205 struct ad7923_state *st = iio_priv(indio_dev); 206 int b_sent; 207 208 b_sent = spi_sync(st->spi, &st->ring_msg); 209 if (b_sent) 210 goto done; 211 212 iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf, 213 iio_get_time_ns(indio_dev)); 214 215 done: 216 iio_trigger_notify_done(indio_dev->trig); 217 218 return IRQ_HANDLED; 219 } 220 221 static int ad7923_scan_direct(struct ad7923_state *st, unsigned int ch) 222 { 223 int ret, cmd; 224 225 cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(ch) | 226 AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) | 227 st->settings; 228 cmd <<= AD7923_SHIFT_REGISTER; 229 st->tx_buf[0] = cpu_to_be16(cmd); 230 231 ret = spi_sync(st->spi, &st->scan_single_msg); 232 if (ret) 233 return ret; 234 235 return be16_to_cpu(st->rx_buf[0]); 236 } 237 238 static int ad7923_get_range(struct ad7923_state *st) 239 { 240 int vref; 241 242 vref = regulator_get_voltage(st->reg); 243 if (vref < 0) 244 return vref; 245 246 vref /= 1000; 247 248 if (!(st->settings & AD7923_RANGE)) 249 vref *= 2; 250 251 return vref; 252 } 253 254 static int ad7923_read_raw(struct iio_dev *indio_dev, 255 struct iio_chan_spec const *chan, 256 int *val, 257 int *val2, 258 long m) 259 { 260 int ret; 261 struct ad7923_state *st = iio_priv(indio_dev); 262 263 switch (m) { 264 case IIO_CHAN_INFO_RAW: 265 ret = iio_device_claim_direct_mode(indio_dev); 266 if (ret) 267 return ret; 268 ret = ad7923_scan_direct(st, chan->address); 269 iio_device_release_direct_mode(indio_dev); 270 271 if (ret < 0) 272 return ret; 273 274 if (chan->address == EXTRACT(ret, 12, 4)) 275 *val = EXTRACT(ret, 0, 12); 276 else 277 return -EIO; 278 279 return IIO_VAL_INT; 280 case IIO_CHAN_INFO_SCALE: 281 ret = ad7923_get_range(st); 282 if (ret < 0) 283 return ret; 284 *val = ret; 285 *val2 = chan->scan_type.realbits; 286 return IIO_VAL_FRACTIONAL_LOG2; 287 } 288 return -EINVAL; 289 } 290 291 static const struct iio_info ad7923_info = { 292 .read_raw = &ad7923_read_raw, 293 .update_scan_mode = ad7923_update_scan_mode, 294 }; 295 296 static int ad7923_probe(struct spi_device *spi) 297 { 298 struct ad7923_state *st; 299 struct iio_dev *indio_dev; 300 const struct ad7923_chip_info *info; 301 int ret; 302 303 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); 304 if (!indio_dev) 305 return -ENOMEM; 306 307 st = iio_priv(indio_dev); 308 309 spi_set_drvdata(spi, indio_dev); 310 311 st->spi = spi; 312 st->settings = AD7923_CODING | AD7923_RANGE | 313 AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS); 314 315 info = &ad7923_chip_info[spi_get_device_id(spi)->driver_data]; 316 317 indio_dev->name = spi_get_device_id(spi)->name; 318 indio_dev->dev.parent = &spi->dev; 319 indio_dev->dev.of_node = spi->dev.of_node; 320 indio_dev->modes = INDIO_DIRECT_MODE; 321 indio_dev->channels = info->channels; 322 indio_dev->num_channels = info->num_channels; 323 indio_dev->info = &ad7923_info; 324 325 /* Setup default message */ 326 327 st->scan_single_xfer[0].tx_buf = &st->tx_buf[0]; 328 st->scan_single_xfer[0].len = 2; 329 st->scan_single_xfer[0].cs_change = 1; 330 st->scan_single_xfer[1].rx_buf = &st->rx_buf[0]; 331 st->scan_single_xfer[1].len = 2; 332 333 spi_message_init(&st->scan_single_msg); 334 spi_message_add_tail(&st->scan_single_xfer[0], &st->scan_single_msg); 335 spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg); 336 337 st->reg = devm_regulator_get(&spi->dev, "refin"); 338 if (IS_ERR(st->reg)) 339 return PTR_ERR(st->reg); 340 341 ret = regulator_enable(st->reg); 342 if (ret) 343 return ret; 344 345 ret = iio_triggered_buffer_setup(indio_dev, NULL, 346 &ad7923_trigger_handler, NULL); 347 if (ret) 348 goto error_disable_reg; 349 350 ret = iio_device_register(indio_dev); 351 if (ret) 352 goto error_cleanup_ring; 353 354 return 0; 355 356 error_cleanup_ring: 357 iio_triggered_buffer_cleanup(indio_dev); 358 error_disable_reg: 359 regulator_disable(st->reg); 360 361 return ret; 362 } 363 364 static int ad7923_remove(struct spi_device *spi) 365 { 366 struct iio_dev *indio_dev = spi_get_drvdata(spi); 367 struct ad7923_state *st = iio_priv(indio_dev); 368 369 iio_device_unregister(indio_dev); 370 iio_triggered_buffer_cleanup(indio_dev); 371 regulator_disable(st->reg); 372 373 return 0; 374 } 375 376 static const struct spi_device_id ad7923_id[] = { 377 {"ad7904", AD7904}, 378 {"ad7914", AD7914}, 379 {"ad7923", AD7924}, 380 {"ad7924", AD7924}, 381 {"ad7908", AD7908}, 382 {"ad7918", AD7918}, 383 {"ad7928", AD7928}, 384 {} 385 }; 386 MODULE_DEVICE_TABLE(spi, ad7923_id); 387 388 static const struct of_device_id ad7923_of_match[] = { 389 { .compatible = "adi,ad7904", }, 390 { .compatible = "adi,ad7914", }, 391 { .compatible = "adi,ad7923", }, 392 { .compatible = "adi,ad7924", }, 393 { .compatible = "adi,ad7908", }, 394 { .compatible = "adi,ad7918", }, 395 { .compatible = "adi,ad7928", }, 396 { }, 397 }; 398 MODULE_DEVICE_TABLE(of, ad7923_of_match); 399 400 static struct spi_driver ad7923_driver = { 401 .driver = { 402 .name = "ad7923", 403 .of_match_table = ad7923_of_match, 404 }, 405 .probe = ad7923_probe, 406 .remove = ad7923_remove, 407 .id_table = ad7923_id, 408 }; 409 module_spi_driver(ad7923_driver); 410 411 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); 412 MODULE_AUTHOR("Patrick Vasseur <patrick.vasseur@c-s.fr>"); 413 MODULE_DESCRIPTION("Analog Devices AD7923 and similar ADC"); 414 MODULE_LICENSE("GPL v2"); 415