xref: /openbmc/linux/drivers/iio/adc/ad7923.c (revision 2f828fb2)
1 /*
2  * AD7904/AD7914/AD7923/AD7924 SPI ADC driver
3  *
4  * Copyright 2011 Analog Devices Inc (from AD7923 Driver)
5  * Copyright 2012 CS Systemes d'Information
6  *
7  * Licensed under the GPL-2.
8  */
9 
10 #include <linux/device.h>
11 #include <linux/kernel.h>
12 #include <linux/slab.h>
13 #include <linux/sysfs.h>
14 #include <linux/spi/spi.h>
15 #include <linux/regulator/consumer.h>
16 #include <linux/err.h>
17 #include <linux/delay.h>
18 #include <linux/module.h>
19 #include <linux/interrupt.h>
20 
21 #include <linux/iio/iio.h>
22 #include <linux/iio/sysfs.h>
23 #include <linux/iio/buffer.h>
24 #include <linux/iio/trigger_consumer.h>
25 #include <linux/iio/triggered_buffer.h>
26 
27 #define AD7923_WRITE_CR		(1 << 11)	/* write control register */
28 #define AD7923_RANGE		(1 << 1)	/* range to REFin */
29 #define AD7923_CODING		(1 << 0)	/* coding is straight binary */
30 #define AD7923_PM_MODE_AS	(1)		/* auto shutdown */
31 #define AD7923_PM_MODE_FS	(2)		/* full shutdown */
32 #define AD7923_PM_MODE_OPS	(3)		/* normal operation */
33 #define AD7923_CHANNEL_0	(0)		/* analog input 0 */
34 #define AD7923_CHANNEL_1	(1)		/* analog input 1 */
35 #define AD7923_CHANNEL_2	(2)		/* analog input 2 */
36 #define AD7923_CHANNEL_3	(3)		/* analog input 3 */
37 #define AD7923_SEQUENCE_OFF	(0)		/* no sequence fonction */
38 #define AD7923_SEQUENCE_PROTECT	(2)		/* no interrupt write cycle */
39 #define AD7923_SEQUENCE_ON	(3)		/* continuous sequence */
40 
41 #define AD7923_MAX_CHAN		4
42 
43 #define AD7923_PM_MODE_WRITE(mode)	(mode << 4)	/* write mode */
44 #define AD7923_CHANNEL_WRITE(channel)	(channel << 6)	/* write channel */
45 #define AD7923_SEQUENCE_WRITE(sequence)	(((sequence & 1) << 3) \
46 					+ ((sequence & 2) << 9))
47 						/* write sequence fonction */
48 /* left shift for CR : bit 11 transmit in first */
49 #define AD7923_SHIFT_REGISTER	4
50 
51 /* val = value, dec = left shift, bits = number of bits of the mask */
52 #define EXTRACT(val, dec, bits)		((val >> dec) & ((1 << bits) - 1))
53 
54 struct ad7923_state {
55 	struct spi_device		*spi;
56 	struct spi_transfer		ring_xfer[5];
57 	struct spi_transfer		scan_single_xfer[2];
58 	struct spi_message		ring_msg;
59 	struct spi_message		scan_single_msg;
60 
61 	struct regulator		*reg;
62 
63 	unsigned int			settings;
64 
65 	/*
66 	 * DMA (thus cache coherency maintenance) requires the
67 	 * transfer buffers to live in their own cache lines.
68 	 */
69 	__be16				rx_buf[4] ____cacheline_aligned;
70 	__be16				tx_buf[4];
71 };
72 
73 struct ad7923_chip_info {
74 	const struct iio_chan_spec *channels;
75 	unsigned int num_channels;
76 };
77 
78 enum ad7923_id {
79 	AD7904,
80 	AD7914,
81 	AD7924,
82 };
83 
84 #define AD7923_V_CHAN(index, bits)					\
85 	{								\
86 		.type = IIO_VOLTAGE,					\
87 		.indexed = 1,						\
88 		.channel = index,					\
89 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
90 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
91 		.address = index,					\
92 		.scan_index = index,					\
93 		.scan_type = {						\
94 			.sign = 'u',					\
95 			.realbits = (bits),				\
96 			.storagebits = 16,				\
97 			.endianness = IIO_BE,				\
98 		},							\
99 	}
100 
101 #define DECLARE_AD7923_CHANNELS(name, bits) \
102 const struct iio_chan_spec name ## _channels[] = { \
103 	AD7923_V_CHAN(0, bits), \
104 	AD7923_V_CHAN(1, bits), \
105 	AD7923_V_CHAN(2, bits), \
106 	AD7923_V_CHAN(3, bits), \
107 	IIO_CHAN_SOFT_TIMESTAMP(4), \
108 }
109 
110 static DECLARE_AD7923_CHANNELS(ad7904, 8);
111 static DECLARE_AD7923_CHANNELS(ad7914, 10);
112 static DECLARE_AD7923_CHANNELS(ad7924, 12);
113 
114 static const struct ad7923_chip_info ad7923_chip_info[] = {
115 	[AD7904] = {
116 		.channels = ad7904_channels,
117 		.num_channels = ARRAY_SIZE(ad7904_channels),
118 	},
119 	[AD7914] = {
120 		.channels = ad7914_channels,
121 		.num_channels = ARRAY_SIZE(ad7914_channels),
122 	},
123 	[AD7924] = {
124 		.channels = ad7924_channels,
125 		.num_channels = ARRAY_SIZE(ad7924_channels),
126 	},
127 };
128 
129 /**
130  * ad7923_update_scan_mode() setup the spi transfer buffer for the new scan mask
131  **/
132 static int ad7923_update_scan_mode(struct iio_dev *indio_dev,
133 	const unsigned long *active_scan_mask)
134 {
135 	struct ad7923_state *st = iio_priv(indio_dev);
136 	int i, cmd, len;
137 
138 	len = 0;
139 	for_each_set_bit(i, active_scan_mask, AD7923_MAX_CHAN) {
140 		cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(i) |
141 			AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) |
142 			st->settings;
143 		cmd <<= AD7923_SHIFT_REGISTER;
144 		st->tx_buf[len++] = cpu_to_be16(cmd);
145 	}
146 	/* build spi ring message */
147 	st->ring_xfer[0].tx_buf = &st->tx_buf[0];
148 	st->ring_xfer[0].len = len;
149 	st->ring_xfer[0].cs_change = 1;
150 
151 	spi_message_init(&st->ring_msg);
152 	spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg);
153 
154 	for (i = 0; i < len; i++) {
155 		st->ring_xfer[i + 1].rx_buf = &st->rx_buf[i];
156 		st->ring_xfer[i + 1].len = 2;
157 		st->ring_xfer[i + 1].cs_change = 1;
158 		spi_message_add_tail(&st->ring_xfer[i + 1], &st->ring_msg);
159 	}
160 	/* make sure last transfer cs_change is not set */
161 	st->ring_xfer[i + 1].cs_change = 0;
162 
163 	return 0;
164 }
165 
166 /**
167  * ad7923_trigger_handler() bh of trigger launched polling to ring buffer
168  *
169  * Currently there is no option in this driver to disable the saving of
170  * timestamps within the ring.
171  **/
172 static irqreturn_t ad7923_trigger_handler(int irq, void *p)
173 {
174 	struct iio_poll_func *pf = p;
175 	struct iio_dev *indio_dev = pf->indio_dev;
176 	struct ad7923_state *st = iio_priv(indio_dev);
177 	int b_sent;
178 
179 	b_sent = spi_sync(st->spi, &st->ring_msg);
180 	if (b_sent)
181 		goto done;
182 
183 	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
184 		iio_get_time_ns(indio_dev));
185 
186 done:
187 	iio_trigger_notify_done(indio_dev->trig);
188 
189 	return IRQ_HANDLED;
190 }
191 
192 static int ad7923_scan_direct(struct ad7923_state *st, unsigned ch)
193 {
194 	int ret, cmd;
195 
196 	cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(ch) |
197 		AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) |
198 		st->settings;
199 	cmd <<= AD7923_SHIFT_REGISTER;
200 	st->tx_buf[0] = cpu_to_be16(cmd);
201 
202 	ret = spi_sync(st->spi, &st->scan_single_msg);
203 	if (ret)
204 		return ret;
205 
206 	return be16_to_cpu(st->rx_buf[0]);
207 }
208 
209 static int ad7923_get_range(struct ad7923_state *st)
210 {
211 	int vref;
212 
213 	vref = regulator_get_voltage(st->reg);
214 	if (vref < 0)
215 		return vref;
216 
217 	vref /= 1000;
218 
219 	if (!(st->settings & AD7923_RANGE))
220 		vref *= 2;
221 
222 	return vref;
223 }
224 
225 static int ad7923_read_raw(struct iio_dev *indio_dev,
226 			   struct iio_chan_spec const *chan,
227 			   int *val,
228 			   int *val2,
229 			   long m)
230 {
231 	int ret;
232 	struct ad7923_state *st = iio_priv(indio_dev);
233 
234 	switch (m) {
235 	case IIO_CHAN_INFO_RAW:
236 		ret = iio_device_claim_direct_mode(indio_dev);
237 		if (ret)
238 			return ret;
239 		ret = ad7923_scan_direct(st, chan->address);
240 		iio_device_release_direct_mode(indio_dev);
241 
242 		if (ret < 0)
243 			return ret;
244 
245 		if (chan->address == EXTRACT(ret, 12, 4))
246 			*val = EXTRACT(ret, 0, 12);
247 		else
248 			return -EIO;
249 
250 		return IIO_VAL_INT;
251 	case IIO_CHAN_INFO_SCALE:
252 		ret = ad7923_get_range(st);
253 		if (ret < 0)
254 			return ret;
255 		*val = ret;
256 		*val2 = chan->scan_type.realbits;
257 		return IIO_VAL_FRACTIONAL_LOG2;
258 	}
259 	return -EINVAL;
260 }
261 
262 static const struct iio_info ad7923_info = {
263 	.read_raw = &ad7923_read_raw,
264 	.update_scan_mode = ad7923_update_scan_mode,
265 };
266 
267 static int ad7923_probe(struct spi_device *spi)
268 {
269 	struct ad7923_state *st;
270 	struct iio_dev *indio_dev;
271 	const struct ad7923_chip_info *info;
272 	int ret;
273 
274 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
275 	if (indio_dev == NULL)
276 		return -ENOMEM;
277 
278 	st = iio_priv(indio_dev);
279 
280 	spi_set_drvdata(spi, indio_dev);
281 
282 	st->spi = spi;
283 	st->settings = AD7923_CODING | AD7923_RANGE |
284 			AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS);
285 
286 	info = &ad7923_chip_info[spi_get_device_id(spi)->driver_data];
287 
288 	indio_dev->name = spi_get_device_id(spi)->name;
289 	indio_dev->dev.parent = &spi->dev;
290 	indio_dev->dev.of_node = spi->dev.of_node;
291 	indio_dev->modes = INDIO_DIRECT_MODE;
292 	indio_dev->channels = info->channels;
293 	indio_dev->num_channels = info->num_channels;
294 	indio_dev->info = &ad7923_info;
295 
296 	/* Setup default message */
297 
298 	st->scan_single_xfer[0].tx_buf = &st->tx_buf[0];
299 	st->scan_single_xfer[0].len = 2;
300 	st->scan_single_xfer[0].cs_change = 1;
301 	st->scan_single_xfer[1].rx_buf = &st->rx_buf[0];
302 	st->scan_single_xfer[1].len = 2;
303 
304 	spi_message_init(&st->scan_single_msg);
305 	spi_message_add_tail(&st->scan_single_xfer[0], &st->scan_single_msg);
306 	spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg);
307 
308 	st->reg = devm_regulator_get(&spi->dev, "refin");
309 	if (IS_ERR(st->reg))
310 		return PTR_ERR(st->reg);
311 
312 	ret = regulator_enable(st->reg);
313 	if (ret)
314 		return ret;
315 
316 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
317 			&ad7923_trigger_handler, NULL);
318 	if (ret)
319 		goto error_disable_reg;
320 
321 	ret = iio_device_register(indio_dev);
322 	if (ret)
323 		goto error_cleanup_ring;
324 
325 	return 0;
326 
327 error_cleanup_ring:
328 	iio_triggered_buffer_cleanup(indio_dev);
329 error_disable_reg:
330 	regulator_disable(st->reg);
331 
332 	return ret;
333 }
334 
335 static int ad7923_remove(struct spi_device *spi)
336 {
337 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
338 	struct ad7923_state *st = iio_priv(indio_dev);
339 
340 	iio_device_unregister(indio_dev);
341 	iio_triggered_buffer_cleanup(indio_dev);
342 	regulator_disable(st->reg);
343 
344 	return 0;
345 }
346 
347 static const struct spi_device_id ad7923_id[] = {
348 	{"ad7904", AD7904},
349 	{"ad7914", AD7914},
350 	{"ad7923", AD7924},
351 	{"ad7924", AD7924},
352 	{}
353 };
354 MODULE_DEVICE_TABLE(spi, ad7923_id);
355 
356 static struct spi_driver ad7923_driver = {
357 	.driver = {
358 		.name	= "ad7923",
359 	},
360 	.probe		= ad7923_probe,
361 	.remove		= ad7923_remove,
362 	.id_table	= ad7923_id,
363 };
364 module_spi_driver(ad7923_driver);
365 
366 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
367 MODULE_AUTHOR("Patrick Vasseur <patrick.vasseur@c-s.fr>");
368 MODULE_DESCRIPTION("Analog Devices AD7904/AD7914/AD7923/AD7924 ADC");
369 MODULE_LICENSE("GPL v2");
370