xref: /openbmc/linux/drivers/iio/adc/ad7923.c (revision 2127c01b)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * AD7904/AD7914/AD7923/AD7924 SPI ADC driver
4  *
5  * Copyright 2011 Analog Devices Inc (from AD7923 Driver)
6  * Copyright 2012 CS Systemes d'Information
7  */
8 
9 #include <linux/device.h>
10 #include <linux/kernel.h>
11 #include <linux/slab.h>
12 #include <linux/sysfs.h>
13 #include <linux/spi/spi.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/err.h>
16 #include <linux/delay.h>
17 #include <linux/module.h>
18 #include <linux/interrupt.h>
19 
20 #include <linux/iio/iio.h>
21 #include <linux/iio/sysfs.h>
22 #include <linux/iio/buffer.h>
23 #include <linux/iio/trigger_consumer.h>
24 #include <linux/iio/triggered_buffer.h>
25 
26 #define AD7923_WRITE_CR		BIT(11)		/* write control register */
27 #define AD7923_RANGE		BIT(1)		/* range to REFin */
28 #define AD7923_CODING		BIT(0)		/* coding is straight binary */
29 #define AD7923_PM_MODE_AS	(1)		/* auto shutdown */
30 #define AD7923_PM_MODE_FS	(2)		/* full shutdown */
31 #define AD7923_PM_MODE_OPS	(3)		/* normal operation */
32 #define AD7923_CHANNEL_0	(0)		/* analog input 0 */
33 #define AD7923_CHANNEL_1	(1)		/* analog input 1 */
34 #define AD7923_CHANNEL_2	(2)		/* analog input 2 */
35 #define AD7923_CHANNEL_3	(3)		/* analog input 3 */
36 #define AD7923_SEQUENCE_OFF	(0)		/* no sequence fonction */
37 #define AD7923_SEQUENCE_PROTECT	(2)		/* no interrupt write cycle */
38 #define AD7923_SEQUENCE_ON	(3)		/* continuous sequence */
39 
40 #define AD7923_MAX_CHAN		4
41 
42 #define AD7923_PM_MODE_WRITE(mode)	((mode) << 4)	 /* write mode */
43 #define AD7923_CHANNEL_WRITE(channel)	((channel) << 6) /* write channel */
44 #define AD7923_SEQUENCE_WRITE(sequence)	((((sequence) & 1) << 3) \
45 					+ (((sequence) & 2) << 9))
46 						/* write sequence fonction */
47 /* left shift for CR : bit 11 transmit in first */
48 #define AD7923_SHIFT_REGISTER	4
49 
50 /* val = value, dec = left shift, bits = number of bits of the mask */
51 #define EXTRACT(val, dec, bits)		(((val) >> (dec)) & ((1 << (bits)) - 1))
52 
53 struct ad7923_state {
54 	struct spi_device		*spi;
55 	struct spi_transfer		ring_xfer[5];
56 	struct spi_transfer		scan_single_xfer[2];
57 	struct spi_message		ring_msg;
58 	struct spi_message		scan_single_msg;
59 
60 	struct regulator		*reg;
61 
62 	unsigned int			settings;
63 
64 	/*
65 	 * DMA (thus cache coherency maintenance) requires the
66 	 * transfer buffers to live in their own cache lines.
67 	 */
68 	__be16				rx_buf[4] ____cacheline_aligned;
69 	__be16				tx_buf[4];
70 };
71 
72 struct ad7923_chip_info {
73 	const struct iio_chan_spec *channels;
74 	unsigned int num_channels;
75 };
76 
77 enum ad7923_id {
78 	AD7904,
79 	AD7914,
80 	AD7924,
81 };
82 
83 #define AD7923_V_CHAN(index, bits)					\
84 	{								\
85 		.type = IIO_VOLTAGE,					\
86 		.indexed = 1,						\
87 		.channel = index,					\
88 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
89 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
90 		.address = index,					\
91 		.scan_index = index,					\
92 		.scan_type = {						\
93 			.sign = 'u',					\
94 			.realbits = (bits),				\
95 			.storagebits = 16,				\
96 			.endianness = IIO_BE,				\
97 		},							\
98 	}
99 
100 #define DECLARE_AD7923_CHANNELS(name, bits) \
101 const struct iio_chan_spec name ## _channels[] = { \
102 	AD7923_V_CHAN(0, bits), \
103 	AD7923_V_CHAN(1, bits), \
104 	AD7923_V_CHAN(2, bits), \
105 	AD7923_V_CHAN(3, bits), \
106 	IIO_CHAN_SOFT_TIMESTAMP(4), \
107 }
108 
109 static DECLARE_AD7923_CHANNELS(ad7904, 8);
110 static DECLARE_AD7923_CHANNELS(ad7914, 10);
111 static DECLARE_AD7923_CHANNELS(ad7924, 12);
112 
113 static const struct ad7923_chip_info ad7923_chip_info[] = {
114 	[AD7904] = {
115 		.channels = ad7904_channels,
116 		.num_channels = ARRAY_SIZE(ad7904_channels),
117 	},
118 	[AD7914] = {
119 		.channels = ad7914_channels,
120 		.num_channels = ARRAY_SIZE(ad7914_channels),
121 	},
122 	[AD7924] = {
123 		.channels = ad7924_channels,
124 		.num_channels = ARRAY_SIZE(ad7924_channels),
125 	},
126 };
127 
128 /**
129  * ad7923_update_scan_mode() setup the spi transfer buffer for the new scan mask
130  **/
131 static int ad7923_update_scan_mode(struct iio_dev *indio_dev,
132 				   const unsigned long *active_scan_mask)
133 {
134 	struct ad7923_state *st = iio_priv(indio_dev);
135 	int i, cmd, len;
136 
137 	len = 0;
138 	for_each_set_bit(i, active_scan_mask, AD7923_MAX_CHAN) {
139 		cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(i) |
140 			AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) |
141 			st->settings;
142 		cmd <<= AD7923_SHIFT_REGISTER;
143 		st->tx_buf[len++] = cpu_to_be16(cmd);
144 	}
145 	/* build spi ring message */
146 	st->ring_xfer[0].tx_buf = &st->tx_buf[0];
147 	st->ring_xfer[0].len = len;
148 	st->ring_xfer[0].cs_change = 1;
149 
150 	spi_message_init(&st->ring_msg);
151 	spi_message_add_tail(&st->ring_xfer[0], &st->ring_msg);
152 
153 	for (i = 0; i < len; i++) {
154 		st->ring_xfer[i + 1].rx_buf = &st->rx_buf[i];
155 		st->ring_xfer[i + 1].len = 2;
156 		st->ring_xfer[i + 1].cs_change = 1;
157 		spi_message_add_tail(&st->ring_xfer[i + 1], &st->ring_msg);
158 	}
159 	/* make sure last transfer cs_change is not set */
160 	st->ring_xfer[i + 1].cs_change = 0;
161 
162 	return 0;
163 }
164 
165 /**
166  * ad7923_trigger_handler() bh of trigger launched polling to ring buffer
167  *
168  * Currently there is no option in this driver to disable the saving of
169  * timestamps within the ring.
170  **/
171 static irqreturn_t ad7923_trigger_handler(int irq, void *p)
172 {
173 	struct iio_poll_func *pf = p;
174 	struct iio_dev *indio_dev = pf->indio_dev;
175 	struct ad7923_state *st = iio_priv(indio_dev);
176 	int b_sent;
177 
178 	b_sent = spi_sync(st->spi, &st->ring_msg);
179 	if (b_sent)
180 		goto done;
181 
182 	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
183 					   iio_get_time_ns(indio_dev));
184 
185 done:
186 	iio_trigger_notify_done(indio_dev->trig);
187 
188 	return IRQ_HANDLED;
189 }
190 
191 static int ad7923_scan_direct(struct ad7923_state *st, unsigned ch)
192 {
193 	int ret, cmd;
194 
195 	cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(ch) |
196 		AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) |
197 		st->settings;
198 	cmd <<= AD7923_SHIFT_REGISTER;
199 	st->tx_buf[0] = cpu_to_be16(cmd);
200 
201 	ret = spi_sync(st->spi, &st->scan_single_msg);
202 	if (ret)
203 		return ret;
204 
205 	return be16_to_cpu(st->rx_buf[0]);
206 }
207 
208 static int ad7923_get_range(struct ad7923_state *st)
209 {
210 	int vref;
211 
212 	vref = regulator_get_voltage(st->reg);
213 	if (vref < 0)
214 		return vref;
215 
216 	vref /= 1000;
217 
218 	if (!(st->settings & AD7923_RANGE))
219 		vref *= 2;
220 
221 	return vref;
222 }
223 
224 static int ad7923_read_raw(struct iio_dev *indio_dev,
225 			   struct iio_chan_spec const *chan,
226 			   int *val,
227 			   int *val2,
228 			   long m)
229 {
230 	int ret;
231 	struct ad7923_state *st = iio_priv(indio_dev);
232 
233 	switch (m) {
234 	case IIO_CHAN_INFO_RAW:
235 		ret = iio_device_claim_direct_mode(indio_dev);
236 		if (ret)
237 			return ret;
238 		ret = ad7923_scan_direct(st, chan->address);
239 		iio_device_release_direct_mode(indio_dev);
240 
241 		if (ret < 0)
242 			return ret;
243 
244 		if (chan->address == EXTRACT(ret, 12, 4))
245 			*val = EXTRACT(ret, 0, 12);
246 		else
247 			return -EIO;
248 
249 		return IIO_VAL_INT;
250 	case IIO_CHAN_INFO_SCALE:
251 		ret = ad7923_get_range(st);
252 		if (ret < 0)
253 			return ret;
254 		*val = ret;
255 		*val2 = chan->scan_type.realbits;
256 		return IIO_VAL_FRACTIONAL_LOG2;
257 	}
258 	return -EINVAL;
259 }
260 
261 static const struct iio_info ad7923_info = {
262 	.read_raw = &ad7923_read_raw,
263 	.update_scan_mode = ad7923_update_scan_mode,
264 };
265 
266 static int ad7923_probe(struct spi_device *spi)
267 {
268 	struct ad7923_state *st;
269 	struct iio_dev *indio_dev;
270 	const struct ad7923_chip_info *info;
271 	int ret;
272 
273 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
274 	if (!indio_dev)
275 		return -ENOMEM;
276 
277 	st = iio_priv(indio_dev);
278 
279 	spi_set_drvdata(spi, indio_dev);
280 
281 	st->spi = spi;
282 	st->settings = AD7923_CODING | AD7923_RANGE |
283 			AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS);
284 
285 	info = &ad7923_chip_info[spi_get_device_id(spi)->driver_data];
286 
287 	indio_dev->name = spi_get_device_id(spi)->name;
288 	indio_dev->dev.parent = &spi->dev;
289 	indio_dev->dev.of_node = spi->dev.of_node;
290 	indio_dev->modes = INDIO_DIRECT_MODE;
291 	indio_dev->channels = info->channels;
292 	indio_dev->num_channels = info->num_channels;
293 	indio_dev->info = &ad7923_info;
294 
295 	/* Setup default message */
296 
297 	st->scan_single_xfer[0].tx_buf = &st->tx_buf[0];
298 	st->scan_single_xfer[0].len = 2;
299 	st->scan_single_xfer[0].cs_change = 1;
300 	st->scan_single_xfer[1].rx_buf = &st->rx_buf[0];
301 	st->scan_single_xfer[1].len = 2;
302 
303 	spi_message_init(&st->scan_single_msg);
304 	spi_message_add_tail(&st->scan_single_xfer[0], &st->scan_single_msg);
305 	spi_message_add_tail(&st->scan_single_xfer[1], &st->scan_single_msg);
306 
307 	st->reg = devm_regulator_get(&spi->dev, "refin");
308 	if (IS_ERR(st->reg))
309 		return PTR_ERR(st->reg);
310 
311 	ret = regulator_enable(st->reg);
312 	if (ret)
313 		return ret;
314 
315 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
316 					 &ad7923_trigger_handler, NULL);
317 	if (ret)
318 		goto error_disable_reg;
319 
320 	ret = iio_device_register(indio_dev);
321 	if (ret)
322 		goto error_cleanup_ring;
323 
324 	return 0;
325 
326 error_cleanup_ring:
327 	iio_triggered_buffer_cleanup(indio_dev);
328 error_disable_reg:
329 	regulator_disable(st->reg);
330 
331 	return ret;
332 }
333 
334 static int ad7923_remove(struct spi_device *spi)
335 {
336 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
337 	struct ad7923_state *st = iio_priv(indio_dev);
338 
339 	iio_device_unregister(indio_dev);
340 	iio_triggered_buffer_cleanup(indio_dev);
341 	regulator_disable(st->reg);
342 
343 	return 0;
344 }
345 
346 static const struct spi_device_id ad7923_id[] = {
347 	{"ad7904", AD7904},
348 	{"ad7914", AD7914},
349 	{"ad7923", AD7924},
350 	{"ad7924", AD7924},
351 	{}
352 };
353 MODULE_DEVICE_TABLE(spi, ad7923_id);
354 
355 static struct spi_driver ad7923_driver = {
356 	.driver = {
357 		.name	= "ad7923",
358 	},
359 	.probe		= ad7923_probe,
360 	.remove		= ad7923_remove,
361 	.id_table	= ad7923_id,
362 };
363 module_spi_driver(ad7923_driver);
364 
365 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
366 MODULE_AUTHOR("Patrick Vasseur <patrick.vasseur@c-s.fr>");
367 MODULE_DESCRIPTION("Analog Devices AD7904/AD7914/AD7923/AD7924 ADC");
368 MODULE_LICENSE("GPL v2");
369