1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * AD7785/AD7792/AD7793/AD7794/AD7795 SPI ADC driver 4 * 5 * Copyright 2011-2012 Analog Devices Inc. 6 */ 7 8 #include <linux/interrupt.h> 9 #include <linux/device.h> 10 #include <linux/kernel.h> 11 #include <linux/slab.h> 12 #include <linux/sysfs.h> 13 #include <linux/spi/spi.h> 14 #include <linux/regulator/consumer.h> 15 #include <linux/err.h> 16 #include <linux/sched.h> 17 #include <linux/delay.h> 18 #include <linux/module.h> 19 20 #include <linux/iio/iio.h> 21 #include <linux/iio/sysfs.h> 22 #include <linux/iio/buffer.h> 23 #include <linux/iio/trigger.h> 24 #include <linux/iio/trigger_consumer.h> 25 #include <linux/iio/triggered_buffer.h> 26 #include <linux/iio/adc/ad_sigma_delta.h> 27 #include <linux/platform_data/ad7793.h> 28 29 /* Registers */ 30 #define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */ 31 #define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */ 32 #define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */ 33 #define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */ 34 #define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */ 35 #define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */ 36 #define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */ 37 #define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit 38 * (AD7792)/24-bit (AD7793)) */ 39 #define AD7793_REG_FULLSALE 7 /* Full-Scale Register 40 * (RW, 16-bit (AD7792)/24-bit (AD7793)) */ 41 42 /* Communications Register Bit Designations (AD7793_REG_COMM) */ 43 #define AD7793_COMM_WEN (1 << 7) /* Write Enable */ 44 #define AD7793_COMM_WRITE (0 << 6) /* Write Operation */ 45 #define AD7793_COMM_READ (1 << 6) /* Read Operation */ 46 #define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ 47 #define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */ 48 49 /* Status Register Bit Designations (AD7793_REG_STAT) */ 50 #define AD7793_STAT_RDY (1 << 7) /* Ready */ 51 #define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */ 52 #define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */ 53 #define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */ 54 #define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */ 55 56 /* Mode Register Bit Designations (AD7793_REG_MODE) */ 57 #define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */ 58 #define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */ 59 #define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */ 60 #define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */ 61 62 #define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */ 63 #define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */ 64 #define AD7793_MODE_IDLE 2 /* Idle Mode */ 65 #define AD7793_MODE_PWRDN 3 /* Power-Down Mode */ 66 #define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ 67 #define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ 68 #define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ 69 #define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ 70 71 #define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not 72 * available at the CLK pin */ 73 #define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available 74 * at the CLK pin */ 75 #define AD7793_CLK_EXT 2 /* External 64 kHz Clock */ 76 #define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */ 77 78 /* Configuration Register Bit Designations (AD7793_REG_CONF) */ 79 #define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage 80 * Generator Enable */ 81 #define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */ 82 #define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */ 83 #define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */ 84 #define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */ 85 #define AD7793_CONF_REFSEL(x) ((x) << 6) /* INT/EXT Reference Select */ 86 #define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */ 87 #define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */ 88 #define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */ 89 90 #define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */ 91 #define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */ 92 #define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */ 93 #define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */ 94 #define AD7793_CH_TEMP 6 /* Temp Sensor */ 95 #define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */ 96 97 #define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */ 98 #define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */ 99 #define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */ 100 #define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */ 101 102 /* ID Register Bit Designations (AD7793_REG_ID) */ 103 #define AD7785_ID 0x3 104 #define AD7792_ID 0xA 105 #define AD7793_ID 0xB 106 #define AD7794_ID 0xF 107 #define AD7795_ID 0xF 108 #define AD7796_ID 0xA 109 #define AD7797_ID 0xB 110 #define AD7798_ID 0x8 111 #define AD7799_ID 0x9 112 #define AD7793_ID_MASK 0xF 113 114 /* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */ 115 #define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1, 116 * IEXC2 connect to IOUT2 */ 117 #define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2, 118 * IEXC2 connect to IOUT1 */ 119 #define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources 120 * IEXC1,2 connect to IOUT1 */ 121 #define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources 122 * IEXC1,2 connect to IOUT2 */ 123 124 #define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */ 125 #define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */ 126 #define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */ 127 128 /* NOTE: 129 * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output. 130 * In order to avoid contentions on the SPI bus, it's therefore necessary 131 * to use spi bus locking. 132 * 133 * The DOUT/RDY output must also be wired to an interrupt capable GPIO. 134 */ 135 136 #define AD7793_FLAG_HAS_CLKSEL BIT(0) 137 #define AD7793_FLAG_HAS_REFSEL BIT(1) 138 #define AD7793_FLAG_HAS_VBIAS BIT(2) 139 #define AD7793_HAS_EXITATION_CURRENT BIT(3) 140 #define AD7793_FLAG_HAS_GAIN BIT(4) 141 #define AD7793_FLAG_HAS_BUFFER BIT(5) 142 143 struct ad7793_chip_info { 144 unsigned int id; 145 const struct iio_chan_spec *channels; 146 unsigned int num_channels; 147 unsigned int flags; 148 149 const struct iio_info *iio_info; 150 const u16 *sample_freq_avail; 151 }; 152 153 struct ad7793_state { 154 const struct ad7793_chip_info *chip_info; 155 struct regulator *reg; 156 u16 int_vref_mv; 157 u16 mode; 158 u16 conf; 159 u32 scale_avail[8][2]; 160 161 struct ad_sigma_delta sd; 162 163 }; 164 165 enum ad7793_supported_device_ids { 166 ID_AD7785, 167 ID_AD7792, 168 ID_AD7793, 169 ID_AD7794, 170 ID_AD7795, 171 ID_AD7796, 172 ID_AD7797, 173 ID_AD7798, 174 ID_AD7799, 175 }; 176 177 static struct ad7793_state *ad_sigma_delta_to_ad7793(struct ad_sigma_delta *sd) 178 { 179 return container_of(sd, struct ad7793_state, sd); 180 } 181 182 static int ad7793_set_channel(struct ad_sigma_delta *sd, unsigned int channel) 183 { 184 struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd); 185 186 st->conf &= ~AD7793_CONF_CHAN_MASK; 187 st->conf |= AD7793_CONF_CHAN(channel); 188 189 return ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 2, st->conf); 190 } 191 192 static int ad7793_set_mode(struct ad_sigma_delta *sd, 193 enum ad_sigma_delta_mode mode) 194 { 195 struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd); 196 197 st->mode &= ~AD7793_MODE_SEL_MASK; 198 st->mode |= AD7793_MODE_SEL(mode); 199 200 return ad_sd_write_reg(&st->sd, AD7793_REG_MODE, 2, st->mode); 201 } 202 203 static const struct ad_sigma_delta_info ad7793_sigma_delta_info = { 204 .set_channel = ad7793_set_channel, 205 .set_mode = ad7793_set_mode, 206 .has_registers = true, 207 .addr_shift = 3, 208 .read_mask = BIT(6), 209 .irq_flags = IRQF_TRIGGER_LOW, 210 }; 211 212 static const struct ad_sd_calib_data ad7793_calib_arr[6] = { 213 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M}, 214 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M}, 215 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M}, 216 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M}, 217 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M}, 218 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M} 219 }; 220 221 static int ad7793_calibrate_all(struct ad7793_state *st) 222 { 223 return ad_sd_calibrate_all(&st->sd, ad7793_calib_arr, 224 ARRAY_SIZE(ad7793_calib_arr)); 225 } 226 227 static int ad7793_check_platform_data(struct ad7793_state *st, 228 const struct ad7793_platform_data *pdata) 229 { 230 if ((pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT1 || 231 pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT2) && 232 ((pdata->exitation_current != AD7793_IX_10uA) && 233 (pdata->exitation_current != AD7793_IX_210uA))) 234 return -EINVAL; 235 236 if (!(st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) && 237 pdata->clock_src != AD7793_CLK_SRC_INT) 238 return -EINVAL; 239 240 if (!(st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) && 241 pdata->refsel != AD7793_REFSEL_REFIN1) 242 return -EINVAL; 243 244 if (!(st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) && 245 pdata->bias_voltage != AD7793_BIAS_VOLTAGE_DISABLED) 246 return -EINVAL; 247 248 if (!(st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) && 249 pdata->exitation_current != AD7793_IX_DISABLED) 250 return -EINVAL; 251 252 return 0; 253 } 254 255 static int ad7793_setup(struct iio_dev *indio_dev, 256 const struct ad7793_platform_data *pdata, 257 unsigned int vref_mv) 258 { 259 struct ad7793_state *st = iio_priv(indio_dev); 260 int i, ret; 261 unsigned long long scale_uv; 262 u32 id; 263 264 ret = ad7793_check_platform_data(st, pdata); 265 if (ret) 266 return ret; 267 268 /* reset the serial interface */ 269 ret = ad_sd_reset(&st->sd, 32); 270 if (ret < 0) 271 goto out; 272 usleep_range(500, 2000); /* Wait for at least 500us */ 273 274 /* write/read test for device presence */ 275 ret = ad_sd_read_reg(&st->sd, AD7793_REG_ID, 1, &id); 276 if (ret) 277 goto out; 278 279 id &= AD7793_ID_MASK; 280 281 if (id != st->chip_info->id) { 282 dev_err(&st->sd.spi->dev, "device ID query failed\n"); 283 goto out; 284 } 285 286 st->mode = AD7793_MODE_RATE(1); 287 st->conf = 0; 288 289 if (st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) 290 st->mode |= AD7793_MODE_CLKSRC(pdata->clock_src); 291 if (st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) 292 st->conf |= AD7793_CONF_REFSEL(pdata->refsel); 293 if (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) 294 st->conf |= AD7793_CONF_VBIAS(pdata->bias_voltage); 295 if (pdata->buffered || !(st->chip_info->flags & AD7793_FLAG_HAS_BUFFER)) 296 st->conf |= AD7793_CONF_BUF; 297 if (pdata->boost_enable && 298 (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS)) 299 st->conf |= AD7793_CONF_BOOST; 300 if (pdata->burnout_current) 301 st->conf |= AD7793_CONF_BO_EN; 302 if (pdata->unipolar) 303 st->conf |= AD7793_CONF_UNIPOLAR; 304 305 if (!(st->chip_info->flags & AD7793_FLAG_HAS_GAIN)) 306 st->conf |= AD7793_CONF_GAIN(7); 307 308 ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE); 309 if (ret) 310 goto out; 311 312 ret = ad7793_set_channel(&st->sd, 0); 313 if (ret) 314 goto out; 315 316 if (st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) { 317 ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, 1, 318 pdata->exitation_current | 319 (pdata->current_source_direction << 2)); 320 if (ret) 321 goto out; 322 } 323 324 ret = ad7793_calibrate_all(st); 325 if (ret) 326 goto out; 327 328 /* Populate available ADC input ranges */ 329 for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { 330 scale_uv = ((u64)vref_mv * 100000000) 331 >> (st->chip_info->channels[0].scan_type.realbits - 332 (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1)); 333 scale_uv >>= i; 334 335 st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; 336 st->scale_avail[i][0] = scale_uv; 337 } 338 339 return 0; 340 out: 341 dev_err(&st->sd.spi->dev, "setup failed\n"); 342 return ret; 343 } 344 345 static const u16 ad7793_sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 346 33, 19, 17, 16, 12, 10, 8, 6, 4}; 347 348 static const u16 ad7797_sample_freq_avail[16] = {0, 0, 0, 123, 62, 50, 0, 349 33, 0, 17, 16, 12, 10, 8, 6, 4}; 350 351 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( 352 "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4"); 353 354 static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797, 355 sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4"); 356 357 static int ad7793_read_avail(struct iio_dev *indio_dev, 358 struct iio_chan_spec const *chan, 359 const int **vals, int *type, int *length, 360 long mask) 361 { 362 struct ad7793_state *st = iio_priv(indio_dev); 363 364 switch (mask) { 365 case IIO_CHAN_INFO_SCALE: 366 *vals = (int *)st->scale_avail; 367 *type = IIO_VAL_INT_PLUS_NANO; 368 /* Values are stored in a 2D matrix */ 369 *length = ARRAY_SIZE(st->scale_avail) * 2; 370 371 return IIO_AVAIL_LIST; 372 default: 373 return -EINVAL; 374 } 375 } 376 377 static struct attribute *ad7793_attributes[] = { 378 &iio_const_attr_sampling_frequency_available.dev_attr.attr, 379 NULL 380 }; 381 382 static const struct attribute_group ad7793_attribute_group = { 383 .attrs = ad7793_attributes, 384 }; 385 386 static struct attribute *ad7797_attributes[] = { 387 &iio_const_attr_sampling_frequency_available_ad7797.dev_attr.attr, 388 NULL 389 }; 390 391 static const struct attribute_group ad7797_attribute_group = { 392 .attrs = ad7797_attributes, 393 }; 394 395 static int ad7793_read_raw(struct iio_dev *indio_dev, 396 struct iio_chan_spec const *chan, 397 int *val, 398 int *val2, 399 long m) 400 { 401 struct ad7793_state *st = iio_priv(indio_dev); 402 int ret; 403 unsigned long long scale_uv; 404 bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR); 405 406 switch (m) { 407 case IIO_CHAN_INFO_RAW: 408 ret = ad_sigma_delta_single_conversion(indio_dev, chan, val); 409 if (ret < 0) 410 return ret; 411 412 return IIO_VAL_INT; 413 414 case IIO_CHAN_INFO_SCALE: 415 switch (chan->type) { 416 case IIO_VOLTAGE: 417 if (chan->differential) { 418 *val = st-> 419 scale_avail[(st->conf >> 8) & 0x7][0]; 420 *val2 = st-> 421 scale_avail[(st->conf >> 8) & 0x7][1]; 422 return IIO_VAL_INT_PLUS_NANO; 423 } 424 /* 1170mV / 2^23 * 6 */ 425 scale_uv = (1170ULL * 1000000000ULL * 6ULL); 426 break; 427 case IIO_TEMP: 428 /* 1170mV / 0.81 mV/C / 2^23 */ 429 scale_uv = 1444444444444444ULL; 430 break; 431 default: 432 return -EINVAL; 433 } 434 435 scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1)); 436 *val = 0; 437 *val2 = scale_uv; 438 return IIO_VAL_INT_PLUS_NANO; 439 case IIO_CHAN_INFO_OFFSET: 440 if (!unipolar) 441 *val = -(1 << (chan->scan_type.realbits - 1)); 442 else 443 *val = 0; 444 445 /* Kelvin to Celsius */ 446 if (chan->type == IIO_TEMP) { 447 unsigned long long offset; 448 unsigned int shift; 449 450 shift = chan->scan_type.realbits - (unipolar ? 0 : 1); 451 offset = 273ULL << shift; 452 do_div(offset, 1444); 453 *val -= offset; 454 } 455 return IIO_VAL_INT; 456 case IIO_CHAN_INFO_SAMP_FREQ: 457 *val = st->chip_info 458 ->sample_freq_avail[AD7793_MODE_RATE(st->mode)]; 459 return IIO_VAL_INT; 460 } 461 return -EINVAL; 462 } 463 464 static int ad7793_write_raw(struct iio_dev *indio_dev, 465 struct iio_chan_spec const *chan, 466 int val, 467 int val2, 468 long mask) 469 { 470 struct ad7793_state *st = iio_priv(indio_dev); 471 int ret, i; 472 unsigned int tmp; 473 474 ret = iio_device_claim_direct_mode(indio_dev); 475 if (ret) 476 return ret; 477 478 switch (mask) { 479 case IIO_CHAN_INFO_SCALE: 480 ret = -EINVAL; 481 for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) 482 if (val2 == st->scale_avail[i][1]) { 483 ret = 0; 484 tmp = st->conf; 485 st->conf &= ~AD7793_CONF_GAIN(-1); 486 st->conf |= AD7793_CONF_GAIN(i); 487 488 if (tmp == st->conf) 489 break; 490 491 ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 492 sizeof(st->conf), st->conf); 493 ad7793_calibrate_all(st); 494 break; 495 } 496 break; 497 case IIO_CHAN_INFO_SAMP_FREQ: 498 if (!val) { 499 ret = -EINVAL; 500 break; 501 } 502 503 for (i = 0; i < 16; i++) 504 if (val == st->chip_info->sample_freq_avail[i]) 505 break; 506 507 if (i == 16) { 508 ret = -EINVAL; 509 break; 510 } 511 512 st->mode &= ~AD7793_MODE_RATE(-1); 513 st->mode |= AD7793_MODE_RATE(i); 514 ad_sd_write_reg(&st->sd, AD7793_REG_MODE, sizeof(st->mode), 515 st->mode); 516 break; 517 default: 518 ret = -EINVAL; 519 } 520 521 iio_device_release_direct_mode(indio_dev); 522 return ret; 523 } 524 525 static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev, 526 struct iio_chan_spec const *chan, 527 long mask) 528 { 529 return IIO_VAL_INT_PLUS_NANO; 530 } 531 532 static const struct iio_info ad7793_info = { 533 .read_raw = &ad7793_read_raw, 534 .write_raw = &ad7793_write_raw, 535 .write_raw_get_fmt = &ad7793_write_raw_get_fmt, 536 .read_avail = ad7793_read_avail, 537 .attrs = &ad7793_attribute_group, 538 .validate_trigger = ad_sd_validate_trigger, 539 }; 540 541 static const struct iio_info ad7797_info = { 542 .read_raw = &ad7793_read_raw, 543 .write_raw = &ad7793_write_raw, 544 .write_raw_get_fmt = &ad7793_write_raw_get_fmt, 545 .attrs = &ad7797_attribute_group, 546 .validate_trigger = ad_sd_validate_trigger, 547 }; 548 549 #define __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 550 _storagebits, _shift, _extend_name, _type, _mask_type_av, _mask_all) \ 551 { \ 552 .type = (_type), \ 553 .differential = (_channel2 == -1 ? 0 : 1), \ 554 .indexed = 1, \ 555 .channel = (_channel1), \ 556 .channel2 = (_channel2), \ 557 .address = (_address), \ 558 .extend_name = (_extend_name), \ 559 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ 560 BIT(IIO_CHAN_INFO_OFFSET), \ 561 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ 562 .info_mask_shared_by_type_available = (_mask_type_av), \ 563 .info_mask_shared_by_all = _mask_all, \ 564 .scan_index = (_si), \ 565 .scan_type = { \ 566 .sign = 'u', \ 567 .realbits = (_bits), \ 568 .storagebits = (_storagebits), \ 569 .shift = (_shift), \ 570 .endianness = IIO_BE, \ 571 }, \ 572 } 573 574 #define AD7793_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 575 _storagebits, _shift) \ 576 __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 577 _storagebits, _shift, NULL, IIO_VOLTAGE, \ 578 BIT(IIO_CHAN_INFO_SCALE), \ 579 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 580 581 #define AD7793_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ 582 _storagebits, _shift) \ 583 __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ 584 _storagebits, _shift, "shorted", IIO_VOLTAGE, \ 585 BIT(IIO_CHAN_INFO_SCALE), \ 586 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 587 588 #define AD7793_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ 589 __AD7793_CHANNEL(_si, 0, -1, _address, _bits, \ 590 _storagebits, _shift, NULL, IIO_TEMP, \ 591 0, \ 592 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 593 594 #define AD7793_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \ 595 _shift) \ 596 __AD7793_CHANNEL(_si, _channel, -1, _address, _bits, \ 597 _storagebits, _shift, "supply", IIO_VOLTAGE, \ 598 0, \ 599 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 600 601 #define AD7797_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 602 _storagebits, _shift) \ 603 __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 604 _storagebits, _shift, NULL, IIO_VOLTAGE, \ 605 0, \ 606 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 607 608 #define AD7797_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ 609 _storagebits, _shift) \ 610 __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ 611 _storagebits, _shift, "shorted", IIO_VOLTAGE, \ 612 0, \ 613 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 614 615 #define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \ 616 const struct iio_chan_spec _name##_channels[] = { \ 617 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \ 618 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \ 619 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \ 620 AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \ 621 AD7793_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \ 622 AD7793_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \ 623 IIO_CHAN_SOFT_TIMESTAMP(6), \ 624 } 625 626 #define DECLARE_AD7795_CHANNELS(_name, _b, _sb) \ 627 const struct iio_chan_spec _name##_channels[] = { \ 628 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ 629 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \ 630 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \ 631 AD7793_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \ 632 AD7793_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \ 633 AD7793_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \ 634 AD7793_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ 635 AD7793_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \ 636 AD7793_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ 637 IIO_CHAN_SOFT_TIMESTAMP(9), \ 638 } 639 640 #define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \ 641 const struct iio_chan_spec _name##_channels[] = { \ 642 AD7797_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ 643 AD7797_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ 644 AD7793_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \ 645 AD7793_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ 646 IIO_CHAN_SOFT_TIMESTAMP(4), \ 647 } 648 649 #define DECLARE_AD7799_CHANNELS(_name, _b, _sb) \ 650 const struct iio_chan_spec _name##_channels[] = { \ 651 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ 652 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \ 653 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \ 654 AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ 655 AD7793_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ 656 IIO_CHAN_SOFT_TIMESTAMP(5), \ 657 } 658 659 static DECLARE_AD7793_CHANNELS(ad7785, 20, 32, 4); 660 static DECLARE_AD7793_CHANNELS(ad7792, 16, 32, 0); 661 static DECLARE_AD7793_CHANNELS(ad7793, 24, 32, 0); 662 static DECLARE_AD7795_CHANNELS(ad7794, 16, 32); 663 static DECLARE_AD7795_CHANNELS(ad7795, 24, 32); 664 static DECLARE_AD7797_CHANNELS(ad7796, 16, 16); 665 static DECLARE_AD7797_CHANNELS(ad7797, 24, 32); 666 static DECLARE_AD7799_CHANNELS(ad7798, 16, 16); 667 static DECLARE_AD7799_CHANNELS(ad7799, 24, 32); 668 669 static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { 670 [ID_AD7785] = { 671 .id = AD7785_ID, 672 .channels = ad7785_channels, 673 .num_channels = ARRAY_SIZE(ad7785_channels), 674 .iio_info = &ad7793_info, 675 .sample_freq_avail = ad7793_sample_freq_avail, 676 .flags = AD7793_FLAG_HAS_CLKSEL | 677 AD7793_FLAG_HAS_REFSEL | 678 AD7793_FLAG_HAS_VBIAS | 679 AD7793_HAS_EXITATION_CURRENT | 680 AD7793_FLAG_HAS_GAIN | 681 AD7793_FLAG_HAS_BUFFER, 682 }, 683 [ID_AD7792] = { 684 .id = AD7792_ID, 685 .channels = ad7792_channels, 686 .num_channels = ARRAY_SIZE(ad7792_channels), 687 .iio_info = &ad7793_info, 688 .sample_freq_avail = ad7793_sample_freq_avail, 689 .flags = AD7793_FLAG_HAS_CLKSEL | 690 AD7793_FLAG_HAS_REFSEL | 691 AD7793_FLAG_HAS_VBIAS | 692 AD7793_HAS_EXITATION_CURRENT | 693 AD7793_FLAG_HAS_GAIN | 694 AD7793_FLAG_HAS_BUFFER, 695 }, 696 [ID_AD7793] = { 697 .id = AD7793_ID, 698 .channels = ad7793_channels, 699 .num_channels = ARRAY_SIZE(ad7793_channels), 700 .iio_info = &ad7793_info, 701 .sample_freq_avail = ad7793_sample_freq_avail, 702 .flags = AD7793_FLAG_HAS_CLKSEL | 703 AD7793_FLAG_HAS_REFSEL | 704 AD7793_FLAG_HAS_VBIAS | 705 AD7793_HAS_EXITATION_CURRENT | 706 AD7793_FLAG_HAS_GAIN | 707 AD7793_FLAG_HAS_BUFFER, 708 }, 709 [ID_AD7794] = { 710 .id = AD7794_ID, 711 .channels = ad7794_channels, 712 .num_channels = ARRAY_SIZE(ad7794_channels), 713 .iio_info = &ad7793_info, 714 .sample_freq_avail = ad7793_sample_freq_avail, 715 .flags = AD7793_FLAG_HAS_CLKSEL | 716 AD7793_FLAG_HAS_REFSEL | 717 AD7793_FLAG_HAS_VBIAS | 718 AD7793_HAS_EXITATION_CURRENT | 719 AD7793_FLAG_HAS_GAIN | 720 AD7793_FLAG_HAS_BUFFER, 721 }, 722 [ID_AD7795] = { 723 .id = AD7795_ID, 724 .channels = ad7795_channels, 725 .num_channels = ARRAY_SIZE(ad7795_channels), 726 .iio_info = &ad7793_info, 727 .sample_freq_avail = ad7793_sample_freq_avail, 728 .flags = AD7793_FLAG_HAS_CLKSEL | 729 AD7793_FLAG_HAS_REFSEL | 730 AD7793_FLAG_HAS_VBIAS | 731 AD7793_HAS_EXITATION_CURRENT | 732 AD7793_FLAG_HAS_GAIN | 733 AD7793_FLAG_HAS_BUFFER, 734 }, 735 [ID_AD7796] = { 736 .id = AD7796_ID, 737 .channels = ad7796_channels, 738 .num_channels = ARRAY_SIZE(ad7796_channels), 739 .iio_info = &ad7797_info, 740 .sample_freq_avail = ad7797_sample_freq_avail, 741 .flags = AD7793_FLAG_HAS_CLKSEL, 742 }, 743 [ID_AD7797] = { 744 .id = AD7797_ID, 745 .channels = ad7797_channels, 746 .num_channels = ARRAY_SIZE(ad7797_channels), 747 .iio_info = &ad7797_info, 748 .sample_freq_avail = ad7797_sample_freq_avail, 749 .flags = AD7793_FLAG_HAS_CLKSEL, 750 }, 751 [ID_AD7798] = { 752 .id = AD7798_ID, 753 .channels = ad7798_channels, 754 .num_channels = ARRAY_SIZE(ad7798_channels), 755 .iio_info = &ad7793_info, 756 .sample_freq_avail = ad7793_sample_freq_avail, 757 .flags = AD7793_FLAG_HAS_GAIN | 758 AD7793_FLAG_HAS_BUFFER, 759 }, 760 [ID_AD7799] = { 761 .id = AD7799_ID, 762 .channels = ad7799_channels, 763 .num_channels = ARRAY_SIZE(ad7799_channels), 764 .iio_info = &ad7793_info, 765 .sample_freq_avail = ad7793_sample_freq_avail, 766 .flags = AD7793_FLAG_HAS_GAIN | 767 AD7793_FLAG_HAS_BUFFER, 768 }, 769 }; 770 771 static int ad7793_probe(struct spi_device *spi) 772 { 773 const struct ad7793_platform_data *pdata = spi->dev.platform_data; 774 struct ad7793_state *st; 775 struct iio_dev *indio_dev; 776 int ret, vref_mv = 0; 777 778 if (!pdata) { 779 dev_err(&spi->dev, "no platform data?\n"); 780 return -ENODEV; 781 } 782 783 if (!spi->irq) { 784 dev_err(&spi->dev, "no IRQ?\n"); 785 return -ENODEV; 786 } 787 788 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); 789 if (indio_dev == NULL) 790 return -ENOMEM; 791 792 st = iio_priv(indio_dev); 793 794 ad_sd_init(&st->sd, indio_dev, spi, &ad7793_sigma_delta_info); 795 796 if (pdata->refsel != AD7793_REFSEL_INTERNAL) { 797 st->reg = devm_regulator_get(&spi->dev, "refin"); 798 if (IS_ERR(st->reg)) 799 return PTR_ERR(st->reg); 800 801 ret = regulator_enable(st->reg); 802 if (ret) 803 return ret; 804 805 vref_mv = regulator_get_voltage(st->reg); 806 if (vref_mv < 0) { 807 ret = vref_mv; 808 goto error_disable_reg; 809 } 810 811 vref_mv /= 1000; 812 } else { 813 vref_mv = 1170; /* Build-in ref */ 814 } 815 816 st->chip_info = 817 &ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data]; 818 819 spi_set_drvdata(spi, indio_dev); 820 821 indio_dev->dev.parent = &spi->dev; 822 indio_dev->dev.of_node = spi->dev.of_node; 823 indio_dev->name = spi_get_device_id(spi)->name; 824 indio_dev->modes = INDIO_DIRECT_MODE; 825 indio_dev->channels = st->chip_info->channels; 826 indio_dev->num_channels = st->chip_info->num_channels; 827 indio_dev->info = st->chip_info->iio_info; 828 829 ret = ad_sd_setup_buffer_and_trigger(indio_dev); 830 if (ret) 831 goto error_disable_reg; 832 833 ret = ad7793_setup(indio_dev, pdata, vref_mv); 834 if (ret) 835 goto error_remove_trigger; 836 837 ret = iio_device_register(indio_dev); 838 if (ret) 839 goto error_remove_trigger; 840 841 return 0; 842 843 error_remove_trigger: 844 ad_sd_cleanup_buffer_and_trigger(indio_dev); 845 error_disable_reg: 846 if (pdata->refsel != AD7793_REFSEL_INTERNAL) 847 regulator_disable(st->reg); 848 849 return ret; 850 } 851 852 static int ad7793_remove(struct spi_device *spi) 853 { 854 const struct ad7793_platform_data *pdata = spi->dev.platform_data; 855 struct iio_dev *indio_dev = spi_get_drvdata(spi); 856 struct ad7793_state *st = iio_priv(indio_dev); 857 858 iio_device_unregister(indio_dev); 859 ad_sd_cleanup_buffer_and_trigger(indio_dev); 860 861 if (pdata->refsel != AD7793_REFSEL_INTERNAL) 862 regulator_disable(st->reg); 863 864 return 0; 865 } 866 867 static const struct spi_device_id ad7793_id[] = { 868 {"ad7785", ID_AD7785}, 869 {"ad7792", ID_AD7792}, 870 {"ad7793", ID_AD7793}, 871 {"ad7794", ID_AD7794}, 872 {"ad7795", ID_AD7795}, 873 {"ad7796", ID_AD7796}, 874 {"ad7797", ID_AD7797}, 875 {"ad7798", ID_AD7798}, 876 {"ad7799", ID_AD7799}, 877 {} 878 }; 879 MODULE_DEVICE_TABLE(spi, ad7793_id); 880 881 static struct spi_driver ad7793_driver = { 882 .driver = { 883 .name = "ad7793", 884 }, 885 .probe = ad7793_probe, 886 .remove = ad7793_remove, 887 .id_table = ad7793_id, 888 }; 889 module_spi_driver(ad7793_driver); 890 891 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); 892 MODULE_DESCRIPTION("Analog Devices AD7793 and similar ADCs"); 893 MODULE_LICENSE("GPL v2"); 894