1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * AD7785/AD7792/AD7793/AD7794/AD7795 SPI ADC driver 4 * 5 * Copyright 2011-2012 Analog Devices Inc. 6 */ 7 8 #include <linux/interrupt.h> 9 #include <linux/device.h> 10 #include <linux/kernel.h> 11 #include <linux/slab.h> 12 #include <linux/sysfs.h> 13 #include <linux/spi/spi.h> 14 #include <linux/regulator/consumer.h> 15 #include <linux/err.h> 16 #include <linux/sched.h> 17 #include <linux/delay.h> 18 #include <linux/module.h> 19 20 #include <linux/iio/iio.h> 21 #include <linux/iio/sysfs.h> 22 #include <linux/iio/buffer.h> 23 #include <linux/iio/trigger.h> 24 #include <linux/iio/trigger_consumer.h> 25 #include <linux/iio/triggered_buffer.h> 26 #include <linux/iio/adc/ad_sigma_delta.h> 27 #include <linux/platform_data/ad7793.h> 28 29 /* Registers */ 30 #define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */ 31 #define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */ 32 #define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */ 33 #define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */ 34 #define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */ 35 #define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */ 36 #define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */ 37 #define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit 38 * (AD7792)/24-bit (AD7793)) */ 39 #define AD7793_REG_FULLSALE 7 /* Full-Scale Register 40 * (RW, 16-bit (AD7792)/24-bit (AD7793)) */ 41 42 /* Communications Register Bit Designations (AD7793_REG_COMM) */ 43 #define AD7793_COMM_WEN (1 << 7) /* Write Enable */ 44 #define AD7793_COMM_WRITE (0 << 6) /* Write Operation */ 45 #define AD7793_COMM_READ (1 << 6) /* Read Operation */ 46 #define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ 47 #define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */ 48 49 /* Status Register Bit Designations (AD7793_REG_STAT) */ 50 #define AD7793_STAT_RDY (1 << 7) /* Ready */ 51 #define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */ 52 #define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */ 53 #define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */ 54 #define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */ 55 56 /* Mode Register Bit Designations (AD7793_REG_MODE) */ 57 #define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */ 58 #define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */ 59 #define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */ 60 #define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */ 61 62 #define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */ 63 #define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */ 64 #define AD7793_MODE_IDLE 2 /* Idle Mode */ 65 #define AD7793_MODE_PWRDN 3 /* Power-Down Mode */ 66 #define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ 67 #define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ 68 #define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ 69 #define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ 70 71 #define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not 72 * available at the CLK pin */ 73 #define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available 74 * at the CLK pin */ 75 #define AD7793_CLK_EXT 2 /* External 64 kHz Clock */ 76 #define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */ 77 78 /* Configuration Register Bit Designations (AD7793_REG_CONF) */ 79 #define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage 80 * Generator Enable */ 81 #define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */ 82 #define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */ 83 #define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */ 84 #define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */ 85 #define AD7793_CONF_REFSEL(x) ((x) << 6) /* INT/EXT Reference Select */ 86 #define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */ 87 #define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */ 88 #define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */ 89 90 #define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */ 91 #define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */ 92 #define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */ 93 #define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */ 94 #define AD7793_CH_TEMP 6 /* Temp Sensor */ 95 #define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */ 96 97 #define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */ 98 #define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */ 99 #define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */ 100 #define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */ 101 102 /* ID Register Bit Designations (AD7793_REG_ID) */ 103 #define AD7785_ID 0x3 104 #define AD7792_ID 0xA 105 #define AD7793_ID 0xB 106 #define AD7794_ID 0xF 107 #define AD7795_ID 0xF 108 #define AD7796_ID 0xA 109 #define AD7797_ID 0xB 110 #define AD7798_ID 0x8 111 #define AD7799_ID 0x9 112 #define AD7793_ID_MASK 0xF 113 114 /* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */ 115 #define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1, 116 * IEXC2 connect to IOUT2 */ 117 #define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2, 118 * IEXC2 connect to IOUT1 */ 119 #define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources 120 * IEXC1,2 connect to IOUT1 */ 121 #define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources 122 * IEXC1,2 connect to IOUT2 */ 123 124 #define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */ 125 #define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */ 126 #define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */ 127 128 /* NOTE: 129 * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output. 130 * In order to avoid contentions on the SPI bus, it's therefore necessary 131 * to use spi bus locking. 132 * 133 * The DOUT/RDY output must also be wired to an interrupt capable GPIO. 134 */ 135 136 #define AD7793_FLAG_HAS_CLKSEL BIT(0) 137 #define AD7793_FLAG_HAS_REFSEL BIT(1) 138 #define AD7793_FLAG_HAS_VBIAS BIT(2) 139 #define AD7793_HAS_EXITATION_CURRENT BIT(3) 140 #define AD7793_FLAG_HAS_GAIN BIT(4) 141 #define AD7793_FLAG_HAS_BUFFER BIT(5) 142 143 struct ad7793_chip_info { 144 unsigned int id; 145 const struct iio_chan_spec *channels; 146 unsigned int num_channels; 147 unsigned int flags; 148 149 const struct iio_info *iio_info; 150 const u16 *sample_freq_avail; 151 }; 152 153 struct ad7793_state { 154 const struct ad7793_chip_info *chip_info; 155 struct regulator *reg; 156 u16 int_vref_mv; 157 u16 mode; 158 u16 conf; 159 u32 scale_avail[8][2]; 160 161 struct ad_sigma_delta sd; 162 163 }; 164 165 enum ad7793_supported_device_ids { 166 ID_AD7785, 167 ID_AD7792, 168 ID_AD7793, 169 ID_AD7794, 170 ID_AD7795, 171 ID_AD7796, 172 ID_AD7797, 173 ID_AD7798, 174 ID_AD7799, 175 }; 176 177 static struct ad7793_state *ad_sigma_delta_to_ad7793(struct ad_sigma_delta *sd) 178 { 179 return container_of(sd, struct ad7793_state, sd); 180 } 181 182 static int ad7793_set_channel(struct ad_sigma_delta *sd, unsigned int channel) 183 { 184 struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd); 185 186 st->conf &= ~AD7793_CONF_CHAN_MASK; 187 st->conf |= AD7793_CONF_CHAN(channel); 188 189 return ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 2, st->conf); 190 } 191 192 static int ad7793_set_mode(struct ad_sigma_delta *sd, 193 enum ad_sigma_delta_mode mode) 194 { 195 struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd); 196 197 st->mode &= ~AD7793_MODE_SEL_MASK; 198 st->mode |= AD7793_MODE_SEL(mode); 199 200 return ad_sd_write_reg(&st->sd, AD7793_REG_MODE, 2, st->mode); 201 } 202 203 static const struct ad_sigma_delta_info ad7793_sigma_delta_info = { 204 .set_channel = ad7793_set_channel, 205 .set_mode = ad7793_set_mode, 206 .has_registers = true, 207 .addr_shift = 3, 208 .read_mask = BIT(6), 209 .irq_flags = IRQF_TRIGGER_FALLING, 210 }; 211 212 static const struct ad_sd_calib_data ad7793_calib_arr[6] = { 213 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M}, 214 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M}, 215 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M}, 216 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M}, 217 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M}, 218 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M} 219 }; 220 221 static int ad7793_calibrate_all(struct ad7793_state *st) 222 { 223 return ad_sd_calibrate_all(&st->sd, ad7793_calib_arr, 224 ARRAY_SIZE(ad7793_calib_arr)); 225 } 226 227 static int ad7793_check_platform_data(struct ad7793_state *st, 228 const struct ad7793_platform_data *pdata) 229 { 230 if ((pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT1 || 231 pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT2) && 232 ((pdata->exitation_current != AD7793_IX_10uA) && 233 (pdata->exitation_current != AD7793_IX_210uA))) 234 return -EINVAL; 235 236 if (!(st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) && 237 pdata->clock_src != AD7793_CLK_SRC_INT) 238 return -EINVAL; 239 240 if (!(st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) && 241 pdata->refsel != AD7793_REFSEL_REFIN1) 242 return -EINVAL; 243 244 if (!(st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) && 245 pdata->bias_voltage != AD7793_BIAS_VOLTAGE_DISABLED) 246 return -EINVAL; 247 248 if (!(st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) && 249 pdata->exitation_current != AD7793_IX_DISABLED) 250 return -EINVAL; 251 252 return 0; 253 } 254 255 static int ad7793_setup(struct iio_dev *indio_dev, 256 const struct ad7793_platform_data *pdata, 257 unsigned int vref_mv) 258 { 259 struct ad7793_state *st = iio_priv(indio_dev); 260 int i, ret; 261 unsigned long long scale_uv; 262 u32 id; 263 264 ret = ad7793_check_platform_data(st, pdata); 265 if (ret) 266 return ret; 267 268 /* reset the serial interface */ 269 ret = ad_sd_reset(&st->sd, 32); 270 if (ret < 0) 271 goto out; 272 usleep_range(500, 2000); /* Wait for at least 500us */ 273 274 /* write/read test for device presence */ 275 ret = ad_sd_read_reg(&st->sd, AD7793_REG_ID, 1, &id); 276 if (ret) 277 goto out; 278 279 id &= AD7793_ID_MASK; 280 281 if (id != st->chip_info->id) { 282 ret = -ENODEV; 283 dev_err(&st->sd.spi->dev, "device ID query failed\n"); 284 goto out; 285 } 286 287 st->mode = AD7793_MODE_RATE(1); 288 st->conf = 0; 289 290 if (st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) 291 st->mode |= AD7793_MODE_CLKSRC(pdata->clock_src); 292 if (st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) 293 st->conf |= AD7793_CONF_REFSEL(pdata->refsel); 294 if (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) 295 st->conf |= AD7793_CONF_VBIAS(pdata->bias_voltage); 296 if (pdata->buffered || !(st->chip_info->flags & AD7793_FLAG_HAS_BUFFER)) 297 st->conf |= AD7793_CONF_BUF; 298 if (pdata->boost_enable && 299 (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS)) 300 st->conf |= AD7793_CONF_BOOST; 301 if (pdata->burnout_current) 302 st->conf |= AD7793_CONF_BO_EN; 303 if (pdata->unipolar) 304 st->conf |= AD7793_CONF_UNIPOLAR; 305 306 if (!(st->chip_info->flags & AD7793_FLAG_HAS_GAIN)) 307 st->conf |= AD7793_CONF_GAIN(7); 308 309 ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE); 310 if (ret) 311 goto out; 312 313 ret = ad7793_set_channel(&st->sd, 0); 314 if (ret) 315 goto out; 316 317 if (st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) { 318 ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, 1, 319 pdata->exitation_current | 320 (pdata->current_source_direction << 2)); 321 if (ret) 322 goto out; 323 } 324 325 ret = ad7793_calibrate_all(st); 326 if (ret) 327 goto out; 328 329 /* Populate available ADC input ranges */ 330 for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { 331 scale_uv = ((u64)vref_mv * 100000000) 332 >> (st->chip_info->channels[0].scan_type.realbits - 333 (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1)); 334 scale_uv >>= i; 335 336 st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; 337 st->scale_avail[i][0] = scale_uv; 338 } 339 340 return 0; 341 out: 342 dev_err(&st->sd.spi->dev, "setup failed\n"); 343 return ret; 344 } 345 346 static const u16 ad7793_sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 347 33, 19, 17, 16, 12, 10, 8, 6, 4}; 348 349 static const u16 ad7797_sample_freq_avail[16] = {0, 0, 0, 123, 62, 50, 0, 350 33, 0, 17, 16, 12, 10, 8, 6, 4}; 351 352 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( 353 "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4"); 354 355 static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797, 356 sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4"); 357 358 static int ad7793_read_avail(struct iio_dev *indio_dev, 359 struct iio_chan_spec const *chan, 360 const int **vals, int *type, int *length, 361 long mask) 362 { 363 struct ad7793_state *st = iio_priv(indio_dev); 364 365 switch (mask) { 366 case IIO_CHAN_INFO_SCALE: 367 *vals = (int *)st->scale_avail; 368 *type = IIO_VAL_INT_PLUS_NANO; 369 /* Values are stored in a 2D matrix */ 370 *length = ARRAY_SIZE(st->scale_avail) * 2; 371 372 return IIO_AVAIL_LIST; 373 default: 374 return -EINVAL; 375 } 376 } 377 378 static struct attribute *ad7793_attributes[] = { 379 &iio_const_attr_sampling_frequency_available.dev_attr.attr, 380 NULL 381 }; 382 383 static const struct attribute_group ad7793_attribute_group = { 384 .attrs = ad7793_attributes, 385 }; 386 387 static struct attribute *ad7797_attributes[] = { 388 &iio_const_attr_sampling_frequency_available_ad7797.dev_attr.attr, 389 NULL 390 }; 391 392 static const struct attribute_group ad7797_attribute_group = { 393 .attrs = ad7797_attributes, 394 }; 395 396 static int ad7793_read_raw(struct iio_dev *indio_dev, 397 struct iio_chan_spec const *chan, 398 int *val, 399 int *val2, 400 long m) 401 { 402 struct ad7793_state *st = iio_priv(indio_dev); 403 int ret; 404 unsigned long long scale_uv; 405 bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR); 406 407 switch (m) { 408 case IIO_CHAN_INFO_RAW: 409 ret = ad_sigma_delta_single_conversion(indio_dev, chan, val); 410 if (ret < 0) 411 return ret; 412 413 return IIO_VAL_INT; 414 415 case IIO_CHAN_INFO_SCALE: 416 switch (chan->type) { 417 case IIO_VOLTAGE: 418 if (chan->differential) { 419 *val = st-> 420 scale_avail[(st->conf >> 8) & 0x7][0]; 421 *val2 = st-> 422 scale_avail[(st->conf >> 8) & 0x7][1]; 423 return IIO_VAL_INT_PLUS_NANO; 424 } 425 /* 1170mV / 2^23 * 6 */ 426 scale_uv = (1170ULL * 1000000000ULL * 6ULL); 427 break; 428 case IIO_TEMP: 429 /* 1170mV / 0.81 mV/C / 2^23 */ 430 scale_uv = 1444444444444444ULL; 431 break; 432 default: 433 return -EINVAL; 434 } 435 436 scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1)); 437 *val = 0; 438 *val2 = scale_uv; 439 return IIO_VAL_INT_PLUS_NANO; 440 case IIO_CHAN_INFO_OFFSET: 441 if (!unipolar) 442 *val = -(1 << (chan->scan_type.realbits - 1)); 443 else 444 *val = 0; 445 446 /* Kelvin to Celsius */ 447 if (chan->type == IIO_TEMP) { 448 unsigned long long offset; 449 unsigned int shift; 450 451 shift = chan->scan_type.realbits - (unipolar ? 0 : 1); 452 offset = 273ULL << shift; 453 do_div(offset, 1444); 454 *val -= offset; 455 } 456 return IIO_VAL_INT; 457 case IIO_CHAN_INFO_SAMP_FREQ: 458 *val = st->chip_info 459 ->sample_freq_avail[AD7793_MODE_RATE(st->mode)]; 460 return IIO_VAL_INT; 461 } 462 return -EINVAL; 463 } 464 465 static int ad7793_write_raw(struct iio_dev *indio_dev, 466 struct iio_chan_spec const *chan, 467 int val, 468 int val2, 469 long mask) 470 { 471 struct ad7793_state *st = iio_priv(indio_dev); 472 int ret, i; 473 unsigned int tmp; 474 475 ret = iio_device_claim_direct_mode(indio_dev); 476 if (ret) 477 return ret; 478 479 switch (mask) { 480 case IIO_CHAN_INFO_SCALE: 481 ret = -EINVAL; 482 for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) 483 if (val2 == st->scale_avail[i][1]) { 484 ret = 0; 485 tmp = st->conf; 486 st->conf &= ~AD7793_CONF_GAIN(-1); 487 st->conf |= AD7793_CONF_GAIN(i); 488 489 if (tmp == st->conf) 490 break; 491 492 ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 493 sizeof(st->conf), st->conf); 494 ad7793_calibrate_all(st); 495 break; 496 } 497 break; 498 case IIO_CHAN_INFO_SAMP_FREQ: 499 if (!val) { 500 ret = -EINVAL; 501 break; 502 } 503 504 for (i = 0; i < 16; i++) 505 if (val == st->chip_info->sample_freq_avail[i]) 506 break; 507 508 if (i == 16) { 509 ret = -EINVAL; 510 break; 511 } 512 513 st->mode &= ~AD7793_MODE_RATE(-1); 514 st->mode |= AD7793_MODE_RATE(i); 515 ad_sd_write_reg(&st->sd, AD7793_REG_MODE, sizeof(st->mode), 516 st->mode); 517 break; 518 default: 519 ret = -EINVAL; 520 } 521 522 iio_device_release_direct_mode(indio_dev); 523 return ret; 524 } 525 526 static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev, 527 struct iio_chan_spec const *chan, 528 long mask) 529 { 530 return IIO_VAL_INT_PLUS_NANO; 531 } 532 533 static const struct iio_info ad7793_info = { 534 .read_raw = &ad7793_read_raw, 535 .write_raw = &ad7793_write_raw, 536 .write_raw_get_fmt = &ad7793_write_raw_get_fmt, 537 .read_avail = ad7793_read_avail, 538 .attrs = &ad7793_attribute_group, 539 .validate_trigger = ad_sd_validate_trigger, 540 }; 541 542 static const struct iio_info ad7797_info = { 543 .read_raw = &ad7793_read_raw, 544 .write_raw = &ad7793_write_raw, 545 .write_raw_get_fmt = &ad7793_write_raw_get_fmt, 546 .attrs = &ad7797_attribute_group, 547 .validate_trigger = ad_sd_validate_trigger, 548 }; 549 550 #define __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 551 _storagebits, _shift, _extend_name, _type, _mask_type_av, _mask_all) \ 552 { \ 553 .type = (_type), \ 554 .differential = (_channel2 == -1 ? 0 : 1), \ 555 .indexed = 1, \ 556 .channel = (_channel1), \ 557 .channel2 = (_channel2), \ 558 .address = (_address), \ 559 .extend_name = (_extend_name), \ 560 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ 561 BIT(IIO_CHAN_INFO_OFFSET), \ 562 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ 563 .info_mask_shared_by_type_available = (_mask_type_av), \ 564 .info_mask_shared_by_all = _mask_all, \ 565 .scan_index = (_si), \ 566 .scan_type = { \ 567 .sign = 'u', \ 568 .realbits = (_bits), \ 569 .storagebits = (_storagebits), \ 570 .shift = (_shift), \ 571 .endianness = IIO_BE, \ 572 }, \ 573 } 574 575 #define AD7793_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 576 _storagebits, _shift) \ 577 __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 578 _storagebits, _shift, NULL, IIO_VOLTAGE, \ 579 BIT(IIO_CHAN_INFO_SCALE), \ 580 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 581 582 #define AD7793_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ 583 _storagebits, _shift) \ 584 __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ 585 _storagebits, _shift, "shorted", IIO_VOLTAGE, \ 586 BIT(IIO_CHAN_INFO_SCALE), \ 587 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 588 589 #define AD7793_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ 590 __AD7793_CHANNEL(_si, 0, -1, _address, _bits, \ 591 _storagebits, _shift, NULL, IIO_TEMP, \ 592 0, \ 593 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 594 595 #define AD7793_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \ 596 _shift) \ 597 __AD7793_CHANNEL(_si, _channel, -1, _address, _bits, \ 598 _storagebits, _shift, "supply", IIO_VOLTAGE, \ 599 0, \ 600 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 601 602 #define AD7797_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 603 _storagebits, _shift) \ 604 __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ 605 _storagebits, _shift, NULL, IIO_VOLTAGE, \ 606 0, \ 607 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 608 609 #define AD7797_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ 610 _storagebits, _shift) \ 611 __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \ 612 _storagebits, _shift, "shorted", IIO_VOLTAGE, \ 613 0, \ 614 BIT(IIO_CHAN_INFO_SAMP_FREQ)) 615 616 #define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \ 617 const struct iio_chan_spec _name##_channels[] = { \ 618 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \ 619 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \ 620 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \ 621 AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \ 622 AD7793_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \ 623 AD7793_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \ 624 IIO_CHAN_SOFT_TIMESTAMP(6), \ 625 } 626 627 #define DECLARE_AD7795_CHANNELS(_name, _b, _sb) \ 628 const struct iio_chan_spec _name##_channels[] = { \ 629 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ 630 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \ 631 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \ 632 AD7793_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \ 633 AD7793_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \ 634 AD7793_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \ 635 AD7793_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ 636 AD7793_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \ 637 AD7793_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ 638 IIO_CHAN_SOFT_TIMESTAMP(9), \ 639 } 640 641 #define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \ 642 const struct iio_chan_spec _name##_channels[] = { \ 643 AD7797_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ 644 AD7797_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ 645 AD7793_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \ 646 AD7793_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ 647 IIO_CHAN_SOFT_TIMESTAMP(4), \ 648 } 649 650 #define DECLARE_AD7799_CHANNELS(_name, _b, _sb) \ 651 const struct iio_chan_spec _name##_channels[] = { \ 652 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ 653 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \ 654 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \ 655 AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ 656 AD7793_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ 657 IIO_CHAN_SOFT_TIMESTAMP(5), \ 658 } 659 660 static DECLARE_AD7793_CHANNELS(ad7785, 20, 32, 4); 661 static DECLARE_AD7793_CHANNELS(ad7792, 16, 32, 0); 662 static DECLARE_AD7793_CHANNELS(ad7793, 24, 32, 0); 663 static DECLARE_AD7795_CHANNELS(ad7794, 16, 32); 664 static DECLARE_AD7795_CHANNELS(ad7795, 24, 32); 665 static DECLARE_AD7797_CHANNELS(ad7796, 16, 16); 666 static DECLARE_AD7797_CHANNELS(ad7797, 24, 32); 667 static DECLARE_AD7799_CHANNELS(ad7798, 16, 16); 668 static DECLARE_AD7799_CHANNELS(ad7799, 24, 32); 669 670 static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { 671 [ID_AD7785] = { 672 .id = AD7785_ID, 673 .channels = ad7785_channels, 674 .num_channels = ARRAY_SIZE(ad7785_channels), 675 .iio_info = &ad7793_info, 676 .sample_freq_avail = ad7793_sample_freq_avail, 677 .flags = AD7793_FLAG_HAS_CLKSEL | 678 AD7793_FLAG_HAS_REFSEL | 679 AD7793_FLAG_HAS_VBIAS | 680 AD7793_HAS_EXITATION_CURRENT | 681 AD7793_FLAG_HAS_GAIN | 682 AD7793_FLAG_HAS_BUFFER, 683 }, 684 [ID_AD7792] = { 685 .id = AD7792_ID, 686 .channels = ad7792_channels, 687 .num_channels = ARRAY_SIZE(ad7792_channels), 688 .iio_info = &ad7793_info, 689 .sample_freq_avail = ad7793_sample_freq_avail, 690 .flags = AD7793_FLAG_HAS_CLKSEL | 691 AD7793_FLAG_HAS_REFSEL | 692 AD7793_FLAG_HAS_VBIAS | 693 AD7793_HAS_EXITATION_CURRENT | 694 AD7793_FLAG_HAS_GAIN | 695 AD7793_FLAG_HAS_BUFFER, 696 }, 697 [ID_AD7793] = { 698 .id = AD7793_ID, 699 .channels = ad7793_channels, 700 .num_channels = ARRAY_SIZE(ad7793_channels), 701 .iio_info = &ad7793_info, 702 .sample_freq_avail = ad7793_sample_freq_avail, 703 .flags = AD7793_FLAG_HAS_CLKSEL | 704 AD7793_FLAG_HAS_REFSEL | 705 AD7793_FLAG_HAS_VBIAS | 706 AD7793_HAS_EXITATION_CURRENT | 707 AD7793_FLAG_HAS_GAIN | 708 AD7793_FLAG_HAS_BUFFER, 709 }, 710 [ID_AD7794] = { 711 .id = AD7794_ID, 712 .channels = ad7794_channels, 713 .num_channels = ARRAY_SIZE(ad7794_channels), 714 .iio_info = &ad7793_info, 715 .sample_freq_avail = ad7793_sample_freq_avail, 716 .flags = AD7793_FLAG_HAS_CLKSEL | 717 AD7793_FLAG_HAS_REFSEL | 718 AD7793_FLAG_HAS_VBIAS | 719 AD7793_HAS_EXITATION_CURRENT | 720 AD7793_FLAG_HAS_GAIN | 721 AD7793_FLAG_HAS_BUFFER, 722 }, 723 [ID_AD7795] = { 724 .id = AD7795_ID, 725 .channels = ad7795_channels, 726 .num_channels = ARRAY_SIZE(ad7795_channels), 727 .iio_info = &ad7793_info, 728 .sample_freq_avail = ad7793_sample_freq_avail, 729 .flags = AD7793_FLAG_HAS_CLKSEL | 730 AD7793_FLAG_HAS_REFSEL | 731 AD7793_FLAG_HAS_VBIAS | 732 AD7793_HAS_EXITATION_CURRENT | 733 AD7793_FLAG_HAS_GAIN | 734 AD7793_FLAG_HAS_BUFFER, 735 }, 736 [ID_AD7796] = { 737 .id = AD7796_ID, 738 .channels = ad7796_channels, 739 .num_channels = ARRAY_SIZE(ad7796_channels), 740 .iio_info = &ad7797_info, 741 .sample_freq_avail = ad7797_sample_freq_avail, 742 .flags = AD7793_FLAG_HAS_CLKSEL, 743 }, 744 [ID_AD7797] = { 745 .id = AD7797_ID, 746 .channels = ad7797_channels, 747 .num_channels = ARRAY_SIZE(ad7797_channels), 748 .iio_info = &ad7797_info, 749 .sample_freq_avail = ad7797_sample_freq_avail, 750 .flags = AD7793_FLAG_HAS_CLKSEL, 751 }, 752 [ID_AD7798] = { 753 .id = AD7798_ID, 754 .channels = ad7798_channels, 755 .num_channels = ARRAY_SIZE(ad7798_channels), 756 .iio_info = &ad7793_info, 757 .sample_freq_avail = ad7793_sample_freq_avail, 758 .flags = AD7793_FLAG_HAS_GAIN | 759 AD7793_FLAG_HAS_BUFFER, 760 }, 761 [ID_AD7799] = { 762 .id = AD7799_ID, 763 .channels = ad7799_channels, 764 .num_channels = ARRAY_SIZE(ad7799_channels), 765 .iio_info = &ad7793_info, 766 .sample_freq_avail = ad7793_sample_freq_avail, 767 .flags = AD7793_FLAG_HAS_GAIN | 768 AD7793_FLAG_HAS_BUFFER, 769 }, 770 }; 771 772 static void ad7793_reg_disable(void *reg) 773 { 774 regulator_disable(reg); 775 } 776 777 static int ad7793_probe(struct spi_device *spi) 778 { 779 const struct ad7793_platform_data *pdata = spi->dev.platform_data; 780 struct ad7793_state *st; 781 struct iio_dev *indio_dev; 782 int ret, vref_mv = 0; 783 784 if (!pdata) { 785 dev_err(&spi->dev, "no platform data?\n"); 786 return -ENODEV; 787 } 788 789 if (!spi->irq) { 790 dev_err(&spi->dev, "no IRQ?\n"); 791 return -ENODEV; 792 } 793 794 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); 795 if (indio_dev == NULL) 796 return -ENOMEM; 797 798 st = iio_priv(indio_dev); 799 800 ad_sd_init(&st->sd, indio_dev, spi, &ad7793_sigma_delta_info); 801 802 if (pdata->refsel != AD7793_REFSEL_INTERNAL) { 803 st->reg = devm_regulator_get(&spi->dev, "refin"); 804 if (IS_ERR(st->reg)) 805 return PTR_ERR(st->reg); 806 807 ret = regulator_enable(st->reg); 808 if (ret) 809 return ret; 810 811 ret = devm_add_action_or_reset(&spi->dev, ad7793_reg_disable, st->reg); 812 if (ret) 813 return ret; 814 815 vref_mv = regulator_get_voltage(st->reg); 816 if (vref_mv < 0) 817 return vref_mv; 818 819 vref_mv /= 1000; 820 } else { 821 vref_mv = 1170; /* Build-in ref */ 822 } 823 824 st->chip_info = 825 &ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data]; 826 827 indio_dev->name = spi_get_device_id(spi)->name; 828 indio_dev->modes = INDIO_DIRECT_MODE; 829 indio_dev->channels = st->chip_info->channels; 830 indio_dev->num_channels = st->chip_info->num_channels; 831 indio_dev->info = st->chip_info->iio_info; 832 833 ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev); 834 if (ret) 835 return ret; 836 837 ret = ad7793_setup(indio_dev, pdata, vref_mv); 838 if (ret) 839 return ret; 840 841 return devm_iio_device_register(&spi->dev, indio_dev); 842 } 843 844 static const struct spi_device_id ad7793_id[] = { 845 {"ad7785", ID_AD7785}, 846 {"ad7792", ID_AD7792}, 847 {"ad7793", ID_AD7793}, 848 {"ad7794", ID_AD7794}, 849 {"ad7795", ID_AD7795}, 850 {"ad7796", ID_AD7796}, 851 {"ad7797", ID_AD7797}, 852 {"ad7798", ID_AD7798}, 853 {"ad7799", ID_AD7799}, 854 {} 855 }; 856 MODULE_DEVICE_TABLE(spi, ad7793_id); 857 858 static struct spi_driver ad7793_driver = { 859 .driver = { 860 .name = "ad7793", 861 }, 862 .probe = ad7793_probe, 863 .id_table = ad7793_id, 864 }; 865 module_spi_driver(ad7793_driver); 866 867 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); 868 MODULE_DESCRIPTION("Analog Devices AD7793 and similar ADCs"); 869 MODULE_LICENSE("GPL v2"); 870