1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * AD7785/AD7792/AD7793/AD7794/AD7795 SPI ADC driver
4 *
5 * Copyright 2011-2012 Analog Devices Inc.
6 */
7
8 #include <linux/interrupt.h>
9 #include <linux/device.h>
10 #include <linux/kernel.h>
11 #include <linux/slab.h>
12 #include <linux/sysfs.h>
13 #include <linux/spi/spi.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/err.h>
16 #include <linux/sched.h>
17 #include <linux/delay.h>
18 #include <linux/module.h>
19
20 #include <linux/iio/iio.h>
21 #include <linux/iio/sysfs.h>
22 #include <linux/iio/buffer.h>
23 #include <linux/iio/trigger.h>
24 #include <linux/iio/trigger_consumer.h>
25 #include <linux/iio/triggered_buffer.h>
26 #include <linux/iio/adc/ad_sigma_delta.h>
27 #include <linux/platform_data/ad7793.h>
28
29 /* Registers */
30 #define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */
31 #define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */
32 #define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */
33 #define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */
34 #define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */
35 #define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */
36 #define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */
37 #define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit
38 * (AD7792)/24-bit (AD7793)) */
39 #define AD7793_REG_FULLSALE 7 /* Full-Scale Register
40 * (RW, 16-bit (AD7792)/24-bit (AD7793)) */
41
42 /* Communications Register Bit Designations (AD7793_REG_COMM) */
43 #define AD7793_COMM_WEN (1 << 7) /* Write Enable */
44 #define AD7793_COMM_WRITE (0 << 6) /* Write Operation */
45 #define AD7793_COMM_READ (1 << 6) /* Read Operation */
46 #define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */
47 #define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */
48
49 /* Status Register Bit Designations (AD7793_REG_STAT) */
50 #define AD7793_STAT_RDY (1 << 7) /* Ready */
51 #define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */
52 #define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */
53 #define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */
54 #define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */
55
56 /* Mode Register Bit Designations (AD7793_REG_MODE) */
57 #define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */
58 #define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */
59 #define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */
60 #define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */
61
62 #define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */
63 #define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */
64 #define AD7793_MODE_IDLE 2 /* Idle Mode */
65 #define AD7793_MODE_PWRDN 3 /* Power-Down Mode */
66 #define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */
67 #define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */
68 #define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */
69 #define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */
70
71 #define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not
72 * available at the CLK pin */
73 #define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available
74 * at the CLK pin */
75 #define AD7793_CLK_EXT 2 /* External 64 kHz Clock */
76 #define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */
77
78 /* Configuration Register Bit Designations (AD7793_REG_CONF) */
79 #define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage
80 * Generator Enable */
81 #define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */
82 #define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */
83 #define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */
84 #define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */
85 #define AD7793_CONF_REFSEL(x) ((x) << 6) /* INT/EXT Reference Select */
86 #define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */
87 #define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */
88 #define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */
89
90 #define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */
91 #define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */
92 #define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */
93 #define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */
94 #define AD7793_CH_TEMP 6 /* Temp Sensor */
95 #define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */
96
97 #define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */
98 #define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */
99 #define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */
100 #define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */
101
102 /* ID Register Bit Designations (AD7793_REG_ID) */
103 #define AD7785_ID 0x3
104 #define AD7792_ID 0xA
105 #define AD7793_ID 0xB
106 #define AD7794_ID 0xF
107 #define AD7795_ID 0xF
108 #define AD7796_ID 0xA
109 #define AD7797_ID 0xB
110 #define AD7798_ID 0x8
111 #define AD7799_ID 0x9
112 #define AD7793_ID_MASK 0xF
113
114 /* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */
115 #define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1,
116 * IEXC2 connect to IOUT2 */
117 #define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2,
118 * IEXC2 connect to IOUT1 */
119 #define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources
120 * IEXC1,2 connect to IOUT1 */
121 #define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources
122 * IEXC1,2 connect to IOUT2 */
123
124 #define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */
125 #define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */
126 #define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */
127
128 /* NOTE:
129 * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
130 * In order to avoid contentions on the SPI bus, it's therefore necessary
131 * to use spi bus locking.
132 *
133 * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
134 */
135
136 #define AD7793_FLAG_HAS_CLKSEL BIT(0)
137 #define AD7793_FLAG_HAS_REFSEL BIT(1)
138 #define AD7793_FLAG_HAS_VBIAS BIT(2)
139 #define AD7793_HAS_EXITATION_CURRENT BIT(3)
140 #define AD7793_FLAG_HAS_GAIN BIT(4)
141 #define AD7793_FLAG_HAS_BUFFER BIT(5)
142
143 struct ad7793_chip_info {
144 unsigned int id;
145 const struct iio_chan_spec *channels;
146 unsigned int num_channels;
147 unsigned int flags;
148
149 const struct iio_info *iio_info;
150 const u16 *sample_freq_avail;
151 };
152
153 struct ad7793_state {
154 const struct ad7793_chip_info *chip_info;
155 struct regulator *reg;
156 u16 int_vref_mv;
157 u16 mode;
158 u16 conf;
159 u32 scale_avail[8][2];
160
161 struct ad_sigma_delta sd;
162
163 };
164
165 enum ad7793_supported_device_ids {
166 ID_AD7785,
167 ID_AD7792,
168 ID_AD7793,
169 ID_AD7794,
170 ID_AD7795,
171 ID_AD7796,
172 ID_AD7797,
173 ID_AD7798,
174 ID_AD7799,
175 };
176
ad_sigma_delta_to_ad7793(struct ad_sigma_delta * sd)177 static struct ad7793_state *ad_sigma_delta_to_ad7793(struct ad_sigma_delta *sd)
178 {
179 return container_of(sd, struct ad7793_state, sd);
180 }
181
ad7793_set_channel(struct ad_sigma_delta * sd,unsigned int channel)182 static int ad7793_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
183 {
184 struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd);
185
186 st->conf &= ~AD7793_CONF_CHAN_MASK;
187 st->conf |= AD7793_CONF_CHAN(channel);
188
189 return ad_sd_write_reg(&st->sd, AD7793_REG_CONF, 2, st->conf);
190 }
191
ad7793_set_mode(struct ad_sigma_delta * sd,enum ad_sigma_delta_mode mode)192 static int ad7793_set_mode(struct ad_sigma_delta *sd,
193 enum ad_sigma_delta_mode mode)
194 {
195 struct ad7793_state *st = ad_sigma_delta_to_ad7793(sd);
196
197 st->mode &= ~AD7793_MODE_SEL_MASK;
198 st->mode |= AD7793_MODE_SEL(mode);
199
200 return ad_sd_write_reg(&st->sd, AD7793_REG_MODE, 2, st->mode);
201 }
202
203 static const struct ad_sigma_delta_info ad7793_sigma_delta_info = {
204 .set_channel = ad7793_set_channel,
205 .set_mode = ad7793_set_mode,
206 .has_registers = true,
207 .addr_shift = 3,
208 .read_mask = BIT(6),
209 .irq_flags = IRQF_TRIGGER_FALLING,
210 };
211
212 static const struct ad_sd_calib_data ad7793_calib_arr[6] = {
213 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M},
214 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M},
215 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M},
216 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M},
217 {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M},
218 {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M}
219 };
220
ad7793_calibrate_all(struct ad7793_state * st)221 static int ad7793_calibrate_all(struct ad7793_state *st)
222 {
223 return ad_sd_calibrate_all(&st->sd, ad7793_calib_arr,
224 ARRAY_SIZE(ad7793_calib_arr));
225 }
226
ad7793_check_platform_data(struct ad7793_state * st,const struct ad7793_platform_data * pdata)227 static int ad7793_check_platform_data(struct ad7793_state *st,
228 const struct ad7793_platform_data *pdata)
229 {
230 if ((pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT1 ||
231 pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT2) &&
232 ((pdata->exitation_current != AD7793_IX_10uA) &&
233 (pdata->exitation_current != AD7793_IX_210uA)))
234 return -EINVAL;
235
236 if (!(st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) &&
237 pdata->clock_src != AD7793_CLK_SRC_INT)
238 return -EINVAL;
239
240 if (!(st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) &&
241 pdata->refsel != AD7793_REFSEL_REFIN1)
242 return -EINVAL;
243
244 if (!(st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) &&
245 pdata->bias_voltage != AD7793_BIAS_VOLTAGE_DISABLED)
246 return -EINVAL;
247
248 if (!(st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) &&
249 pdata->exitation_current != AD7793_IX_DISABLED)
250 return -EINVAL;
251
252 return 0;
253 }
254
ad7793_setup(struct iio_dev * indio_dev,const struct ad7793_platform_data * pdata,unsigned int vref_mv)255 static int ad7793_setup(struct iio_dev *indio_dev,
256 const struct ad7793_platform_data *pdata,
257 unsigned int vref_mv)
258 {
259 struct ad7793_state *st = iio_priv(indio_dev);
260 int i, ret;
261 unsigned long long scale_uv;
262 u32 id;
263
264 ret = ad7793_check_platform_data(st, pdata);
265 if (ret)
266 return ret;
267
268 /* reset the serial interface */
269 ret = ad_sd_reset(&st->sd, 32);
270 if (ret < 0)
271 goto out;
272 usleep_range(500, 2000); /* Wait for at least 500us */
273
274 /* write/read test for device presence */
275 ret = ad_sd_read_reg(&st->sd, AD7793_REG_ID, 1, &id);
276 if (ret)
277 goto out;
278
279 id &= AD7793_ID_MASK;
280
281 if (id != st->chip_info->id) {
282 ret = -ENODEV;
283 dev_err(&st->sd.spi->dev, "device ID query failed\n");
284 goto out;
285 }
286
287 st->mode = AD7793_MODE_RATE(1);
288 st->conf = 0;
289
290 if (st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL)
291 st->mode |= AD7793_MODE_CLKSRC(pdata->clock_src);
292 if (st->chip_info->flags & AD7793_FLAG_HAS_REFSEL)
293 st->conf |= AD7793_CONF_REFSEL(pdata->refsel);
294 if (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS)
295 st->conf |= AD7793_CONF_VBIAS(pdata->bias_voltage);
296 if (pdata->buffered || !(st->chip_info->flags & AD7793_FLAG_HAS_BUFFER))
297 st->conf |= AD7793_CONF_BUF;
298 if (pdata->boost_enable &&
299 (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS))
300 st->conf |= AD7793_CONF_BOOST;
301 if (pdata->burnout_current)
302 st->conf |= AD7793_CONF_BO_EN;
303 if (pdata->unipolar)
304 st->conf |= AD7793_CONF_UNIPOLAR;
305
306 if (!(st->chip_info->flags & AD7793_FLAG_HAS_GAIN))
307 st->conf |= AD7793_CONF_GAIN(7);
308
309 ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE);
310 if (ret)
311 goto out;
312
313 ret = ad7793_set_channel(&st->sd, 0);
314 if (ret)
315 goto out;
316
317 if (st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) {
318 ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, 1,
319 pdata->exitation_current |
320 (pdata->current_source_direction << 2));
321 if (ret)
322 goto out;
323 }
324
325 ret = ad7793_calibrate_all(st);
326 if (ret)
327 goto out;
328
329 /* Populate available ADC input ranges */
330 for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
331 scale_uv = ((u64)vref_mv * 100000000)
332 >> (st->chip_info->channels[0].scan_type.realbits -
333 (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1));
334 scale_uv >>= i;
335
336 st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
337 st->scale_avail[i][0] = scale_uv;
338 }
339
340 return 0;
341 out:
342 dev_err(&st->sd.spi->dev, "setup failed\n");
343 return ret;
344 }
345
346 static const u16 ad7793_sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39,
347 33, 19, 17, 16, 12, 10, 8, 6, 4};
348
349 static const u16 ad7797_sample_freq_avail[16] = {0, 0, 0, 123, 62, 50, 0,
350 33, 0, 17, 16, 12, 10, 8, 6, 4};
351
352 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
353 "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4");
354
355 static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797,
356 sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4");
357
ad7793_read_avail(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,const int ** vals,int * type,int * length,long mask)358 static int ad7793_read_avail(struct iio_dev *indio_dev,
359 struct iio_chan_spec const *chan,
360 const int **vals, int *type, int *length,
361 long mask)
362 {
363 struct ad7793_state *st = iio_priv(indio_dev);
364
365 switch (mask) {
366 case IIO_CHAN_INFO_SCALE:
367 *vals = (int *)st->scale_avail;
368 *type = IIO_VAL_INT_PLUS_NANO;
369 /* Values are stored in a 2D matrix */
370 *length = ARRAY_SIZE(st->scale_avail) * 2;
371
372 return IIO_AVAIL_LIST;
373 default:
374 return -EINVAL;
375 }
376 }
377
378 static struct attribute *ad7793_attributes[] = {
379 &iio_const_attr_sampling_frequency_available.dev_attr.attr,
380 NULL
381 };
382
383 static const struct attribute_group ad7793_attribute_group = {
384 .attrs = ad7793_attributes,
385 };
386
387 static struct attribute *ad7797_attributes[] = {
388 &iio_const_attr_sampling_frequency_available_ad7797.dev_attr.attr,
389 NULL
390 };
391
392 static const struct attribute_group ad7797_attribute_group = {
393 .attrs = ad7797_attributes,
394 };
395
ad7793_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long m)396 static int ad7793_read_raw(struct iio_dev *indio_dev,
397 struct iio_chan_spec const *chan,
398 int *val,
399 int *val2,
400 long m)
401 {
402 struct ad7793_state *st = iio_priv(indio_dev);
403 int ret;
404 unsigned long long scale_uv;
405 bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR);
406
407 switch (m) {
408 case IIO_CHAN_INFO_RAW:
409 ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
410 if (ret < 0)
411 return ret;
412
413 return IIO_VAL_INT;
414
415 case IIO_CHAN_INFO_SCALE:
416 switch (chan->type) {
417 case IIO_VOLTAGE:
418 if (chan->differential) {
419 *val = st->
420 scale_avail[(st->conf >> 8) & 0x7][0];
421 *val2 = st->
422 scale_avail[(st->conf >> 8) & 0x7][1];
423 return IIO_VAL_INT_PLUS_NANO;
424 }
425 /* 1170mV / 2^23 * 6 */
426 scale_uv = (1170ULL * 1000000000ULL * 6ULL);
427 break;
428 case IIO_TEMP:
429 /* 1170mV / 0.81 mV/C / 2^23 */
430 scale_uv = 1444444444444444ULL;
431 break;
432 default:
433 return -EINVAL;
434 }
435
436 scale_uv >>= (chan->scan_type.realbits - (unipolar ? 0 : 1));
437 *val = 0;
438 *val2 = scale_uv;
439 return IIO_VAL_INT_PLUS_NANO;
440 case IIO_CHAN_INFO_OFFSET:
441 if (!unipolar)
442 *val = -(1 << (chan->scan_type.realbits - 1));
443 else
444 *val = 0;
445
446 /* Kelvin to Celsius */
447 if (chan->type == IIO_TEMP) {
448 unsigned long long offset;
449 unsigned int shift;
450
451 shift = chan->scan_type.realbits - (unipolar ? 0 : 1);
452 offset = 273ULL << shift;
453 do_div(offset, 1444);
454 *val -= offset;
455 }
456 return IIO_VAL_INT;
457 case IIO_CHAN_INFO_SAMP_FREQ:
458 *val = st->chip_info
459 ->sample_freq_avail[AD7793_MODE_RATE(st->mode)];
460 return IIO_VAL_INT;
461 }
462 return -EINVAL;
463 }
464
ad7793_write_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int val,int val2,long mask)465 static int ad7793_write_raw(struct iio_dev *indio_dev,
466 struct iio_chan_spec const *chan,
467 int val,
468 int val2,
469 long mask)
470 {
471 struct ad7793_state *st = iio_priv(indio_dev);
472 int ret, i;
473 unsigned int tmp;
474
475 ret = iio_device_claim_direct_mode(indio_dev);
476 if (ret)
477 return ret;
478
479 switch (mask) {
480 case IIO_CHAN_INFO_SCALE:
481 ret = -EINVAL;
482 for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
483 if (val2 == st->scale_avail[i][1]) {
484 ret = 0;
485 tmp = st->conf;
486 st->conf &= ~AD7793_CONF_GAIN(-1);
487 st->conf |= AD7793_CONF_GAIN(i);
488
489 if (tmp == st->conf)
490 break;
491
492 ad_sd_write_reg(&st->sd, AD7793_REG_CONF,
493 sizeof(st->conf), st->conf);
494 ad7793_calibrate_all(st);
495 break;
496 }
497 break;
498 case IIO_CHAN_INFO_SAMP_FREQ:
499 if (!val) {
500 ret = -EINVAL;
501 break;
502 }
503
504 for (i = 0; i < 16; i++)
505 if (val == st->chip_info->sample_freq_avail[i])
506 break;
507
508 if (i == 16) {
509 ret = -EINVAL;
510 break;
511 }
512
513 st->mode &= ~AD7793_MODE_RATE(-1);
514 st->mode |= AD7793_MODE_RATE(i);
515 ad_sd_write_reg(&st->sd, AD7793_REG_MODE, sizeof(st->mode),
516 st->mode);
517 break;
518 default:
519 ret = -EINVAL;
520 }
521
522 iio_device_release_direct_mode(indio_dev);
523 return ret;
524 }
525
ad7793_write_raw_get_fmt(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,long mask)526 static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev,
527 struct iio_chan_spec const *chan,
528 long mask)
529 {
530 return IIO_VAL_INT_PLUS_NANO;
531 }
532
533 static const struct iio_info ad7793_info = {
534 .read_raw = &ad7793_read_raw,
535 .write_raw = &ad7793_write_raw,
536 .write_raw_get_fmt = &ad7793_write_raw_get_fmt,
537 .read_avail = ad7793_read_avail,
538 .attrs = &ad7793_attribute_group,
539 .validate_trigger = ad_sd_validate_trigger,
540 };
541
542 static const struct iio_info ad7797_info = {
543 .read_raw = &ad7793_read_raw,
544 .write_raw = &ad7793_write_raw,
545 .write_raw_get_fmt = &ad7793_write_raw_get_fmt,
546 .attrs = &ad7797_attribute_group,
547 .validate_trigger = ad_sd_validate_trigger,
548 };
549
550 #define __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
551 _storagebits, _shift, _extend_name, _type, _mask_type_av, _mask_all) \
552 { \
553 .type = (_type), \
554 .differential = (_channel2 == -1 ? 0 : 1), \
555 .indexed = 1, \
556 .channel = (_channel1), \
557 .channel2 = (_channel2), \
558 .address = (_address), \
559 .extend_name = (_extend_name), \
560 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
561 BIT(IIO_CHAN_INFO_OFFSET), \
562 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
563 .info_mask_shared_by_type_available = (_mask_type_av), \
564 .info_mask_shared_by_all = _mask_all, \
565 .scan_index = (_si), \
566 .scan_type = { \
567 .sign = 'u', \
568 .realbits = (_bits), \
569 .storagebits = (_storagebits), \
570 .shift = (_shift), \
571 .endianness = IIO_BE, \
572 }, \
573 }
574
575 #define AD7793_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
576 _storagebits, _shift) \
577 __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
578 _storagebits, _shift, NULL, IIO_VOLTAGE, \
579 BIT(IIO_CHAN_INFO_SCALE), \
580 BIT(IIO_CHAN_INFO_SAMP_FREQ))
581
582 #define AD7793_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
583 _storagebits, _shift) \
584 __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \
585 _storagebits, _shift, "shorted", IIO_VOLTAGE, \
586 BIT(IIO_CHAN_INFO_SCALE), \
587 BIT(IIO_CHAN_INFO_SAMP_FREQ))
588
589 #define AD7793_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \
590 __AD7793_CHANNEL(_si, 0, -1, _address, _bits, \
591 _storagebits, _shift, NULL, IIO_TEMP, \
592 0, \
593 BIT(IIO_CHAN_INFO_SAMP_FREQ))
594
595 #define AD7793_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
596 _shift) \
597 __AD7793_CHANNEL(_si, _channel, -1, _address, _bits, \
598 _storagebits, _shift, "supply", IIO_VOLTAGE, \
599 0, \
600 BIT(IIO_CHAN_INFO_SAMP_FREQ))
601
602 #define AD7797_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
603 _storagebits, _shift) \
604 __AD7793_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
605 _storagebits, _shift, NULL, IIO_VOLTAGE, \
606 0, \
607 BIT(IIO_CHAN_INFO_SAMP_FREQ))
608
609 #define AD7797_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
610 _storagebits, _shift) \
611 __AD7793_CHANNEL(_si, _channel, _channel, _address, _bits, \
612 _storagebits, _shift, "shorted", IIO_VOLTAGE, \
613 0, \
614 BIT(IIO_CHAN_INFO_SAMP_FREQ))
615
616 #define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \
617 const struct iio_chan_spec _name##_channels[] = { \
618 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \
619 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), (_s)), \
620 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), (_s)), \
621 AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), (_s)), \
622 AD7793_TEMP_CHANNEL(4, AD7793_CH_TEMP, (_b), (_sb), (_s)), \
623 AD7793_SUPPLY_CHANNEL(5, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), (_s)), \
624 IIO_CHAN_SOFT_TIMESTAMP(6), \
625 }
626
627 #define DECLARE_AD7795_CHANNELS(_name, _b, _sb) \
628 const struct iio_chan_spec _name##_channels[] = { \
629 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
630 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
631 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
632 AD7793_DIFF_CHANNEL(3, 3, 3, AD7795_CH_AIN4P_AIN4M, (_b), (_sb), 0), \
633 AD7793_DIFF_CHANNEL(4, 4, 4, AD7795_CH_AIN5P_AIN5M, (_b), (_sb), 0), \
634 AD7793_DIFF_CHANNEL(5, 5, 5, AD7795_CH_AIN6P_AIN6M, (_b), (_sb), 0), \
635 AD7793_SHORTED_CHANNEL(6, 0, AD7795_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
636 AD7793_TEMP_CHANNEL(7, AD7793_CH_TEMP, (_b), (_sb), 0), \
637 AD7793_SUPPLY_CHANNEL(8, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
638 IIO_CHAN_SOFT_TIMESTAMP(9), \
639 }
640
641 #define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \
642 const struct iio_chan_spec _name##_channels[] = { \
643 AD7797_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
644 AD7797_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
645 AD7793_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \
646 AD7793_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
647 IIO_CHAN_SOFT_TIMESTAMP(4), \
648 }
649
650 #define DECLARE_AD7799_CHANNELS(_name, _b, _sb) \
651 const struct iio_chan_spec _name##_channels[] = { \
652 AD7793_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \
653 AD7793_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \
654 AD7793_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \
655 AD7793_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \
656 AD7793_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \
657 IIO_CHAN_SOFT_TIMESTAMP(5), \
658 }
659
660 static DECLARE_AD7793_CHANNELS(ad7785, 20, 32, 4);
661 static DECLARE_AD7793_CHANNELS(ad7792, 16, 32, 0);
662 static DECLARE_AD7793_CHANNELS(ad7793, 24, 32, 0);
663 static DECLARE_AD7795_CHANNELS(ad7794, 16, 32);
664 static DECLARE_AD7795_CHANNELS(ad7795, 24, 32);
665 static DECLARE_AD7797_CHANNELS(ad7796, 16, 16);
666 static DECLARE_AD7797_CHANNELS(ad7797, 24, 32);
667 static DECLARE_AD7799_CHANNELS(ad7798, 16, 16);
668 static DECLARE_AD7799_CHANNELS(ad7799, 24, 32);
669
670 static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
671 [ID_AD7785] = {
672 .id = AD7785_ID,
673 .channels = ad7785_channels,
674 .num_channels = ARRAY_SIZE(ad7785_channels),
675 .iio_info = &ad7793_info,
676 .sample_freq_avail = ad7793_sample_freq_avail,
677 .flags = AD7793_FLAG_HAS_CLKSEL |
678 AD7793_FLAG_HAS_REFSEL |
679 AD7793_FLAG_HAS_VBIAS |
680 AD7793_HAS_EXITATION_CURRENT |
681 AD7793_FLAG_HAS_GAIN |
682 AD7793_FLAG_HAS_BUFFER,
683 },
684 [ID_AD7792] = {
685 .id = AD7792_ID,
686 .channels = ad7792_channels,
687 .num_channels = ARRAY_SIZE(ad7792_channels),
688 .iio_info = &ad7793_info,
689 .sample_freq_avail = ad7793_sample_freq_avail,
690 .flags = AD7793_FLAG_HAS_CLKSEL |
691 AD7793_FLAG_HAS_REFSEL |
692 AD7793_FLAG_HAS_VBIAS |
693 AD7793_HAS_EXITATION_CURRENT |
694 AD7793_FLAG_HAS_GAIN |
695 AD7793_FLAG_HAS_BUFFER,
696 },
697 [ID_AD7793] = {
698 .id = AD7793_ID,
699 .channels = ad7793_channels,
700 .num_channels = ARRAY_SIZE(ad7793_channels),
701 .iio_info = &ad7793_info,
702 .sample_freq_avail = ad7793_sample_freq_avail,
703 .flags = AD7793_FLAG_HAS_CLKSEL |
704 AD7793_FLAG_HAS_REFSEL |
705 AD7793_FLAG_HAS_VBIAS |
706 AD7793_HAS_EXITATION_CURRENT |
707 AD7793_FLAG_HAS_GAIN |
708 AD7793_FLAG_HAS_BUFFER,
709 },
710 [ID_AD7794] = {
711 .id = AD7794_ID,
712 .channels = ad7794_channels,
713 .num_channels = ARRAY_SIZE(ad7794_channels),
714 .iio_info = &ad7793_info,
715 .sample_freq_avail = ad7793_sample_freq_avail,
716 .flags = AD7793_FLAG_HAS_CLKSEL |
717 AD7793_FLAG_HAS_REFSEL |
718 AD7793_FLAG_HAS_VBIAS |
719 AD7793_HAS_EXITATION_CURRENT |
720 AD7793_FLAG_HAS_GAIN |
721 AD7793_FLAG_HAS_BUFFER,
722 },
723 [ID_AD7795] = {
724 .id = AD7795_ID,
725 .channels = ad7795_channels,
726 .num_channels = ARRAY_SIZE(ad7795_channels),
727 .iio_info = &ad7793_info,
728 .sample_freq_avail = ad7793_sample_freq_avail,
729 .flags = AD7793_FLAG_HAS_CLKSEL |
730 AD7793_FLAG_HAS_REFSEL |
731 AD7793_FLAG_HAS_VBIAS |
732 AD7793_HAS_EXITATION_CURRENT |
733 AD7793_FLAG_HAS_GAIN |
734 AD7793_FLAG_HAS_BUFFER,
735 },
736 [ID_AD7796] = {
737 .id = AD7796_ID,
738 .channels = ad7796_channels,
739 .num_channels = ARRAY_SIZE(ad7796_channels),
740 .iio_info = &ad7797_info,
741 .sample_freq_avail = ad7797_sample_freq_avail,
742 .flags = AD7793_FLAG_HAS_CLKSEL,
743 },
744 [ID_AD7797] = {
745 .id = AD7797_ID,
746 .channels = ad7797_channels,
747 .num_channels = ARRAY_SIZE(ad7797_channels),
748 .iio_info = &ad7797_info,
749 .sample_freq_avail = ad7797_sample_freq_avail,
750 .flags = AD7793_FLAG_HAS_CLKSEL,
751 },
752 [ID_AD7798] = {
753 .id = AD7798_ID,
754 .channels = ad7798_channels,
755 .num_channels = ARRAY_SIZE(ad7798_channels),
756 .iio_info = &ad7793_info,
757 .sample_freq_avail = ad7793_sample_freq_avail,
758 .flags = AD7793_FLAG_HAS_GAIN |
759 AD7793_FLAG_HAS_BUFFER,
760 },
761 [ID_AD7799] = {
762 .id = AD7799_ID,
763 .channels = ad7799_channels,
764 .num_channels = ARRAY_SIZE(ad7799_channels),
765 .iio_info = &ad7793_info,
766 .sample_freq_avail = ad7793_sample_freq_avail,
767 .flags = AD7793_FLAG_HAS_GAIN |
768 AD7793_FLAG_HAS_BUFFER,
769 },
770 };
771
ad7793_reg_disable(void * reg)772 static void ad7793_reg_disable(void *reg)
773 {
774 regulator_disable(reg);
775 }
776
ad7793_probe(struct spi_device * spi)777 static int ad7793_probe(struct spi_device *spi)
778 {
779 const struct ad7793_platform_data *pdata = spi->dev.platform_data;
780 struct ad7793_state *st;
781 struct iio_dev *indio_dev;
782 int ret, vref_mv = 0;
783
784 if (!pdata) {
785 dev_err(&spi->dev, "no platform data?\n");
786 return -ENODEV;
787 }
788
789 if (!spi->irq) {
790 dev_err(&spi->dev, "no IRQ?\n");
791 return -ENODEV;
792 }
793
794 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
795 if (indio_dev == NULL)
796 return -ENOMEM;
797
798 st = iio_priv(indio_dev);
799
800 ad_sd_init(&st->sd, indio_dev, spi, &ad7793_sigma_delta_info);
801
802 if (pdata->refsel != AD7793_REFSEL_INTERNAL) {
803 st->reg = devm_regulator_get(&spi->dev, "refin");
804 if (IS_ERR(st->reg))
805 return PTR_ERR(st->reg);
806
807 ret = regulator_enable(st->reg);
808 if (ret)
809 return ret;
810
811 ret = devm_add_action_or_reset(&spi->dev, ad7793_reg_disable, st->reg);
812 if (ret)
813 return ret;
814
815 vref_mv = regulator_get_voltage(st->reg);
816 if (vref_mv < 0)
817 return vref_mv;
818
819 vref_mv /= 1000;
820 } else {
821 vref_mv = 1170; /* Build-in ref */
822 }
823
824 st->chip_info =
825 &ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data];
826
827 indio_dev->name = spi_get_device_id(spi)->name;
828 indio_dev->modes = INDIO_DIRECT_MODE;
829 indio_dev->channels = st->chip_info->channels;
830 indio_dev->num_channels = st->chip_info->num_channels;
831 indio_dev->info = st->chip_info->iio_info;
832
833 ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
834 if (ret)
835 return ret;
836
837 ret = ad7793_setup(indio_dev, pdata, vref_mv);
838 if (ret)
839 return ret;
840
841 return devm_iio_device_register(&spi->dev, indio_dev);
842 }
843
844 static const struct spi_device_id ad7793_id[] = {
845 {"ad7785", ID_AD7785},
846 {"ad7792", ID_AD7792},
847 {"ad7793", ID_AD7793},
848 {"ad7794", ID_AD7794},
849 {"ad7795", ID_AD7795},
850 {"ad7796", ID_AD7796},
851 {"ad7797", ID_AD7797},
852 {"ad7798", ID_AD7798},
853 {"ad7799", ID_AD7799},
854 {}
855 };
856 MODULE_DEVICE_TABLE(spi, ad7793_id);
857
858 static struct spi_driver ad7793_driver = {
859 .driver = {
860 .name = "ad7793",
861 },
862 .probe = ad7793_probe,
863 .id_table = ad7793_id,
864 };
865 module_spi_driver(ad7793_driver);
866
867 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
868 MODULE_DESCRIPTION("Analog Devices AD7793 and similar ADCs");
869 MODULE_LICENSE("GPL v2");
870 MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);
871