1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * AD7766/AD7767 SPI ADC driver 4 * 5 * Copyright 2016 Analog Devices Inc. 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/delay.h> 10 #include <linux/device.h> 11 #include <linux/err.h> 12 #include <linux/gpio/consumer.h> 13 #include <linux/module.h> 14 #include <linux/regulator/consumer.h> 15 #include <linux/slab.h> 16 #include <linux/spi/spi.h> 17 18 #include <linux/iio/iio.h> 19 #include <linux/iio/buffer.h> 20 #include <linux/iio/trigger.h> 21 #include <linux/iio/trigger_consumer.h> 22 #include <linux/iio/triggered_buffer.h> 23 24 struct ad7766_chip_info { 25 unsigned int decimation_factor; 26 }; 27 28 enum { 29 AD7766_SUPPLY_AVDD = 0, 30 AD7766_SUPPLY_DVDD = 1, 31 AD7766_SUPPLY_VREF = 2, 32 AD7766_NUM_SUPPLIES = 3 33 }; 34 35 struct ad7766 { 36 const struct ad7766_chip_info *chip_info; 37 struct spi_device *spi; 38 struct clk *mclk; 39 struct gpio_desc *pd_gpio; 40 struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES]; 41 42 struct iio_trigger *trig; 43 44 struct spi_transfer xfer; 45 struct spi_message msg; 46 47 /* 48 * DMA (thus cache coherency maintenance) requires the 49 * transfer buffers to live in their own cache lines. 50 * Make the buffer large enough for one 24 bit sample and one 64 bit 51 * aligned 64 bit timestamp. 52 */ 53 unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)] 54 ____cacheline_aligned; 55 }; 56 57 /* 58 * AD7766 and AD7767 variations are interface compatible, the main difference is 59 * analog performance. Both parts will use the same ID. 60 */ 61 enum ad7766_device_ids { 62 ID_AD7766, 63 ID_AD7766_1, 64 ID_AD7766_2, 65 }; 66 67 static irqreturn_t ad7766_trigger_handler(int irq, void *p) 68 { 69 struct iio_poll_func *pf = p; 70 struct iio_dev *indio_dev = pf->indio_dev; 71 struct ad7766 *ad7766 = iio_priv(indio_dev); 72 int ret; 73 74 ret = spi_sync(ad7766->spi, &ad7766->msg); 75 if (ret < 0) 76 goto done; 77 78 iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data, 79 pf->timestamp); 80 done: 81 iio_trigger_notify_done(indio_dev->trig); 82 83 return IRQ_HANDLED; 84 } 85 86 static int ad7766_preenable(struct iio_dev *indio_dev) 87 { 88 struct ad7766 *ad7766 = iio_priv(indio_dev); 89 int ret; 90 91 ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg); 92 if (ret < 0) { 93 dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n", 94 ret); 95 return ret; 96 } 97 98 ret = clk_prepare_enable(ad7766->mclk); 99 if (ret < 0) { 100 dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret); 101 regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg); 102 return ret; 103 } 104 105 gpiod_set_value(ad7766->pd_gpio, 0); 106 107 return 0; 108 } 109 110 static int ad7766_postdisable(struct iio_dev *indio_dev) 111 { 112 struct ad7766 *ad7766 = iio_priv(indio_dev); 113 114 gpiod_set_value(ad7766->pd_gpio, 1); 115 116 /* 117 * The PD pin is synchronous to the clock, so give it some time to 118 * notice the change before we disable the clock. 119 */ 120 msleep(20); 121 122 clk_disable_unprepare(ad7766->mclk); 123 regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg); 124 125 return 0; 126 } 127 128 static int ad7766_read_raw(struct iio_dev *indio_dev, 129 const struct iio_chan_spec *chan, int *val, int *val2, long info) 130 { 131 struct ad7766 *ad7766 = iio_priv(indio_dev); 132 struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer; 133 int scale_uv; 134 135 switch (info) { 136 case IIO_CHAN_INFO_SCALE: 137 scale_uv = regulator_get_voltage(vref); 138 if (scale_uv < 0) 139 return scale_uv; 140 *val = scale_uv / 1000; 141 *val2 = chan->scan_type.realbits; 142 return IIO_VAL_FRACTIONAL_LOG2; 143 case IIO_CHAN_INFO_SAMP_FREQ: 144 *val = clk_get_rate(ad7766->mclk) / 145 ad7766->chip_info->decimation_factor; 146 return IIO_VAL_INT; 147 } 148 return -EINVAL; 149 } 150 151 static const struct iio_chan_spec ad7766_channels[] = { 152 { 153 .type = IIO_VOLTAGE, 154 .indexed = 1, 155 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), 156 .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), 157 .scan_type = { 158 .sign = 's', 159 .realbits = 24, 160 .storagebits = 32, 161 .endianness = IIO_BE, 162 }, 163 }, 164 IIO_CHAN_SOFT_TIMESTAMP(1), 165 }; 166 167 static const struct ad7766_chip_info ad7766_chip_info[] = { 168 [ID_AD7766] = { 169 .decimation_factor = 8, 170 }, 171 [ID_AD7766_1] = { 172 .decimation_factor = 16, 173 }, 174 [ID_AD7766_2] = { 175 .decimation_factor = 32, 176 }, 177 }; 178 179 static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = { 180 .preenable = &ad7766_preenable, 181 .postdisable = &ad7766_postdisable, 182 }; 183 184 static const struct iio_info ad7766_info = { 185 .read_raw = &ad7766_read_raw, 186 }; 187 188 static irqreturn_t ad7766_irq(int irq, void *private) 189 { 190 iio_trigger_poll(private); 191 return IRQ_HANDLED; 192 } 193 194 static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable) 195 { 196 struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig); 197 198 if (enable) 199 enable_irq(ad7766->spi->irq); 200 else 201 disable_irq(ad7766->spi->irq); 202 203 return 0; 204 } 205 206 static const struct iio_trigger_ops ad7766_trigger_ops = { 207 .set_trigger_state = ad7766_set_trigger_state, 208 .validate_device = iio_trigger_validate_own_device, 209 }; 210 211 static int ad7766_probe(struct spi_device *spi) 212 { 213 const struct spi_device_id *id = spi_get_device_id(spi); 214 struct iio_dev *indio_dev; 215 struct ad7766 *ad7766; 216 int ret; 217 218 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766)); 219 if (!indio_dev) 220 return -ENOMEM; 221 222 ad7766 = iio_priv(indio_dev); 223 ad7766->chip_info = &ad7766_chip_info[id->driver_data]; 224 225 ad7766->mclk = devm_clk_get(&spi->dev, "mclk"); 226 if (IS_ERR(ad7766->mclk)) 227 return PTR_ERR(ad7766->mclk); 228 229 ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd"; 230 ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd"; 231 ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref"; 232 233 ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg), 234 ad7766->reg); 235 if (ret) 236 return ret; 237 238 ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", 239 GPIOD_OUT_HIGH); 240 if (IS_ERR(ad7766->pd_gpio)) 241 return PTR_ERR(ad7766->pd_gpio); 242 243 indio_dev->name = spi_get_device_id(spi)->name; 244 indio_dev->modes = INDIO_DIRECT_MODE; 245 indio_dev->channels = ad7766_channels; 246 indio_dev->num_channels = ARRAY_SIZE(ad7766_channels); 247 indio_dev->info = &ad7766_info; 248 249 if (spi->irq > 0) { 250 ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d", 251 indio_dev->name, 252 iio_device_id(indio_dev)); 253 if (!ad7766->trig) 254 return -ENOMEM; 255 256 ad7766->trig->ops = &ad7766_trigger_ops; 257 iio_trigger_set_drvdata(ad7766->trig, ad7766); 258 259 /* 260 * The device generates interrupts as long as it is powered up. 261 * Some platforms might not allow the option to power it down so 262 * don't enable the interrupt to avoid extra load on the system 263 */ 264 ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq, 265 IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN, 266 dev_name(&spi->dev), 267 ad7766->trig); 268 if (ret < 0) 269 return ret; 270 271 ret = devm_iio_trigger_register(&spi->dev, ad7766->trig); 272 if (ret) 273 return ret; 274 } 275 276 ad7766->spi = spi; 277 278 /* First byte always 0 */ 279 ad7766->xfer.rx_buf = &ad7766->data[1]; 280 ad7766->xfer.len = 3; 281 282 spi_message_init(&ad7766->msg); 283 spi_message_add_tail(&ad7766->xfer, &ad7766->msg); 284 285 ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, 286 &iio_pollfunc_store_time, &ad7766_trigger_handler, 287 &ad7766_buffer_setup_ops); 288 if (ret) 289 return ret; 290 291 return devm_iio_device_register(&spi->dev, indio_dev); 292 } 293 294 static const struct spi_device_id ad7766_id[] = { 295 {"ad7766", ID_AD7766}, 296 {"ad7766-1", ID_AD7766_1}, 297 {"ad7766-2", ID_AD7766_2}, 298 {"ad7767", ID_AD7766}, 299 {"ad7767-1", ID_AD7766_1}, 300 {"ad7767-2", ID_AD7766_2}, 301 {} 302 }; 303 MODULE_DEVICE_TABLE(spi, ad7766_id); 304 305 static struct spi_driver ad7766_driver = { 306 .driver = { 307 .name = "ad7766", 308 }, 309 .probe = ad7766_probe, 310 .id_table = ad7766_id, 311 }; 312 module_spi_driver(ad7766_driver); 313 314 MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); 315 MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support"); 316 MODULE_LICENSE("GPL v2"); 317