xref: /openbmc/linux/drivers/iio/adc/ad7606.c (revision 0e6774ec)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * AD7606 SPI ADC driver
4  *
5  * Copyright 2011 Analog Devices Inc.
6  */
7 
8 #include <linux/delay.h>
9 #include <linux/device.h>
10 #include <linux/err.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/interrupt.h>
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/property.h>
16 #include <linux/regulator/consumer.h>
17 #include <linux/sched.h>
18 #include <linux/slab.h>
19 #include <linux/sysfs.h>
20 #include <linux/util_macros.h>
21 
22 #include <linux/iio/iio.h>
23 #include <linux/iio/buffer.h>
24 #include <linux/iio/sysfs.h>
25 #include <linux/iio/trigger.h>
26 #include <linux/iio/triggered_buffer.h>
27 #include <linux/iio/trigger_consumer.h>
28 
29 #include "ad7606.h"
30 
31 /*
32  * Scales are computed as 5000/32768 and 10000/32768 respectively,
33  * so that when applied to the raw values they provide mV values
34  */
35 static const unsigned int ad7606_scale_avail[2] = {
36 	152588, 305176
37 };
38 
39 
40 static const unsigned int ad7616_sw_scale_avail[3] = {
41 	76293, 152588, 305176
42 };
43 
44 static const unsigned int ad7606_oversampling_avail[7] = {
45 	1, 2, 4, 8, 16, 32, 64,
46 };
47 
48 static const unsigned int ad7616_oversampling_avail[8] = {
49 	1, 2, 4, 8, 16, 32, 64, 128,
50 };
51 
52 int ad7606_reset(struct ad7606_state *st)
53 {
54 	if (st->gpio_reset) {
55 		gpiod_set_value(st->gpio_reset, 1);
56 		ndelay(100); /* t_reset >= 100ns */
57 		gpiod_set_value(st->gpio_reset, 0);
58 		return 0;
59 	}
60 
61 	return -ENODEV;
62 }
63 EXPORT_SYMBOL_NS_GPL(ad7606_reset, IIO_AD7606);
64 
65 static int ad7606_reg_access(struct iio_dev *indio_dev,
66 			     unsigned int reg,
67 			     unsigned int writeval,
68 			     unsigned int *readval)
69 {
70 	struct ad7606_state *st = iio_priv(indio_dev);
71 	int ret;
72 
73 	mutex_lock(&st->lock);
74 	if (readval) {
75 		ret = st->bops->reg_read(st, reg);
76 		if (ret < 0)
77 			goto err_unlock;
78 		*readval = ret;
79 		ret = 0;
80 	} else {
81 		ret = st->bops->reg_write(st, reg, writeval);
82 	}
83 err_unlock:
84 	mutex_unlock(&st->lock);
85 	return ret;
86 }
87 
88 static int ad7606_read_samples(struct ad7606_state *st)
89 {
90 	unsigned int num = st->chip_info->num_channels - 1;
91 	u16 *data = st->data;
92 
93 	return st->bops->read_block(st->dev, num, data);
94 }
95 
96 static irqreturn_t ad7606_trigger_handler(int irq, void *p)
97 {
98 	struct iio_poll_func *pf = p;
99 	struct iio_dev *indio_dev = pf->indio_dev;
100 	struct ad7606_state *st = iio_priv(indio_dev);
101 	int ret;
102 
103 	mutex_lock(&st->lock);
104 
105 	ret = ad7606_read_samples(st);
106 	if (ret == 0)
107 		iio_push_to_buffers_with_timestamp(indio_dev, st->data,
108 						   iio_get_time_ns(indio_dev));
109 
110 	iio_trigger_notify_done(indio_dev->trig);
111 	/* The rising edge of the CONVST signal starts a new conversion. */
112 	gpiod_set_value(st->gpio_convst, 1);
113 
114 	mutex_unlock(&st->lock);
115 
116 	return IRQ_HANDLED;
117 }
118 
119 static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
120 {
121 	struct ad7606_state *st = iio_priv(indio_dev);
122 	int ret;
123 
124 	gpiod_set_value(st->gpio_convst, 1);
125 	ret = wait_for_completion_timeout(&st->completion,
126 					  msecs_to_jiffies(1000));
127 	if (!ret) {
128 		ret = -ETIMEDOUT;
129 		goto error_ret;
130 	}
131 
132 	ret = ad7606_read_samples(st);
133 	if (ret == 0)
134 		ret = st->data[ch];
135 
136 error_ret:
137 	gpiod_set_value(st->gpio_convst, 0);
138 
139 	return ret;
140 }
141 
142 static int ad7606_read_raw(struct iio_dev *indio_dev,
143 			   struct iio_chan_spec const *chan,
144 			   int *val,
145 			   int *val2,
146 			   long m)
147 {
148 	int ret, ch = 0;
149 	struct ad7606_state *st = iio_priv(indio_dev);
150 
151 	switch (m) {
152 	case IIO_CHAN_INFO_RAW:
153 		ret = iio_device_claim_direct_mode(indio_dev);
154 		if (ret)
155 			return ret;
156 
157 		ret = ad7606_scan_direct(indio_dev, chan->address);
158 		iio_device_release_direct_mode(indio_dev);
159 
160 		if (ret < 0)
161 			return ret;
162 		*val = (short)ret;
163 		return IIO_VAL_INT;
164 	case IIO_CHAN_INFO_SCALE:
165 		if (st->sw_mode_en)
166 			ch = chan->address;
167 		*val = 0;
168 		*val2 = st->scale_avail[st->range[ch]];
169 		return IIO_VAL_INT_PLUS_MICRO;
170 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
171 		*val = st->oversampling;
172 		return IIO_VAL_INT;
173 	}
174 	return -EINVAL;
175 }
176 
177 static ssize_t ad7606_show_avail(char *buf, const unsigned int *vals,
178 				 unsigned int n, bool micros)
179 {
180 	size_t len = 0;
181 	int i;
182 
183 	for (i = 0; i < n; i++) {
184 		len += scnprintf(buf + len, PAGE_SIZE - len,
185 			micros ? "0.%06u " : "%u ", vals[i]);
186 	}
187 	buf[len - 1] = '\n';
188 
189 	return len;
190 }
191 
192 static ssize_t in_voltage_scale_available_show(struct device *dev,
193 					       struct device_attribute *attr,
194 					       char *buf)
195 {
196 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
197 	struct ad7606_state *st = iio_priv(indio_dev);
198 
199 	return ad7606_show_avail(buf, st->scale_avail, st->num_scales, true);
200 }
201 
202 static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
203 
204 static int ad7606_write_scale_hw(struct iio_dev *indio_dev, int ch, int val)
205 {
206 	struct ad7606_state *st = iio_priv(indio_dev);
207 
208 	gpiod_set_value(st->gpio_range, val);
209 
210 	return 0;
211 }
212 
213 static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
214 {
215 	struct ad7606_state *st = iio_priv(indio_dev);
216 	DECLARE_BITMAP(values, 3);
217 
218 	values[0] = val & GENMASK(2, 0);
219 
220 	gpiod_set_array_value(st->gpio_os->ndescs, st->gpio_os->desc,
221 			      st->gpio_os->info, values);
222 
223 	/* AD7616 requires a reset to update value */
224 	if (st->chip_info->os_req_reset)
225 		ad7606_reset(st);
226 
227 	return 0;
228 }
229 
230 static int ad7606_write_raw(struct iio_dev *indio_dev,
231 			    struct iio_chan_spec const *chan,
232 			    int val,
233 			    int val2,
234 			    long mask)
235 {
236 	struct ad7606_state *st = iio_priv(indio_dev);
237 	int i, ret, ch = 0;
238 
239 	switch (mask) {
240 	case IIO_CHAN_INFO_SCALE:
241 		mutex_lock(&st->lock);
242 		i = find_closest(val2, st->scale_avail, st->num_scales);
243 		if (st->sw_mode_en)
244 			ch = chan->address;
245 		ret = st->write_scale(indio_dev, ch, i);
246 		if (ret < 0) {
247 			mutex_unlock(&st->lock);
248 			return ret;
249 		}
250 		st->range[ch] = i;
251 		mutex_unlock(&st->lock);
252 
253 		return 0;
254 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
255 		if (val2)
256 			return -EINVAL;
257 		i = find_closest(val, st->oversampling_avail,
258 				 st->num_os_ratios);
259 		mutex_lock(&st->lock);
260 		ret = st->write_os(indio_dev, i);
261 		if (ret < 0) {
262 			mutex_unlock(&st->lock);
263 			return ret;
264 		}
265 		st->oversampling = st->oversampling_avail[i];
266 		mutex_unlock(&st->lock);
267 
268 		return 0;
269 	default:
270 		return -EINVAL;
271 	}
272 }
273 
274 static ssize_t ad7606_oversampling_ratio_avail(struct device *dev,
275 					       struct device_attribute *attr,
276 					       char *buf)
277 {
278 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
279 	struct ad7606_state *st = iio_priv(indio_dev);
280 
281 	return ad7606_show_avail(buf, st->oversampling_avail,
282 				 st->num_os_ratios, false);
283 }
284 
285 static IIO_DEVICE_ATTR(oversampling_ratio_available, 0444,
286 		       ad7606_oversampling_ratio_avail, NULL, 0);
287 
288 static struct attribute *ad7606_attributes_os_and_range[] = {
289 	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
290 	&iio_dev_attr_oversampling_ratio_available.dev_attr.attr,
291 	NULL,
292 };
293 
294 static const struct attribute_group ad7606_attribute_group_os_and_range = {
295 	.attrs = ad7606_attributes_os_and_range,
296 };
297 
298 static struct attribute *ad7606_attributes_os[] = {
299 	&iio_dev_attr_oversampling_ratio_available.dev_attr.attr,
300 	NULL,
301 };
302 
303 static const struct attribute_group ad7606_attribute_group_os = {
304 	.attrs = ad7606_attributes_os,
305 };
306 
307 static struct attribute *ad7606_attributes_range[] = {
308 	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
309 	NULL,
310 };
311 
312 static const struct attribute_group ad7606_attribute_group_range = {
313 	.attrs = ad7606_attributes_range,
314 };
315 
316 static const struct iio_chan_spec ad7605_channels[] = {
317 	IIO_CHAN_SOFT_TIMESTAMP(4),
318 	AD7605_CHANNEL(0),
319 	AD7605_CHANNEL(1),
320 	AD7605_CHANNEL(2),
321 	AD7605_CHANNEL(3),
322 };
323 
324 static const struct iio_chan_spec ad7606_channels[] = {
325 	IIO_CHAN_SOFT_TIMESTAMP(8),
326 	AD7606_CHANNEL(0),
327 	AD7606_CHANNEL(1),
328 	AD7606_CHANNEL(2),
329 	AD7606_CHANNEL(3),
330 	AD7606_CHANNEL(4),
331 	AD7606_CHANNEL(5),
332 	AD7606_CHANNEL(6),
333 	AD7606_CHANNEL(7),
334 };
335 
336 /*
337  * The current assumption that this driver makes for AD7616, is that it's
338  * working in Hardware Mode with Serial, Burst and Sequencer modes activated.
339  * To activate them, following pins must be pulled high:
340  *	-SER/PAR
341  *	-SEQEN
342  * And following pins must be pulled low:
343  *	-WR/BURST
344  *	-DB4/SER1W
345  */
346 static const struct iio_chan_spec ad7616_channels[] = {
347 	IIO_CHAN_SOFT_TIMESTAMP(16),
348 	AD7606_CHANNEL(0),
349 	AD7606_CHANNEL(1),
350 	AD7606_CHANNEL(2),
351 	AD7606_CHANNEL(3),
352 	AD7606_CHANNEL(4),
353 	AD7606_CHANNEL(5),
354 	AD7606_CHANNEL(6),
355 	AD7606_CHANNEL(7),
356 	AD7606_CHANNEL(8),
357 	AD7606_CHANNEL(9),
358 	AD7606_CHANNEL(10),
359 	AD7606_CHANNEL(11),
360 	AD7606_CHANNEL(12),
361 	AD7606_CHANNEL(13),
362 	AD7606_CHANNEL(14),
363 	AD7606_CHANNEL(15),
364 };
365 
366 static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
367 	/* More devices added in future */
368 	[ID_AD7605_4] = {
369 		.channels = ad7605_channels,
370 		.num_channels = 5,
371 	},
372 	[ID_AD7606_8] = {
373 		.channels = ad7606_channels,
374 		.num_channels = 9,
375 		.oversampling_avail = ad7606_oversampling_avail,
376 		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
377 	},
378 	[ID_AD7606_6] = {
379 		.channels = ad7606_channels,
380 		.num_channels = 7,
381 		.oversampling_avail = ad7606_oversampling_avail,
382 		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
383 	},
384 	[ID_AD7606_4] = {
385 		.channels = ad7606_channels,
386 		.num_channels = 5,
387 		.oversampling_avail = ad7606_oversampling_avail,
388 		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
389 	},
390 	[ID_AD7606B] = {
391 		.channels = ad7606_channels,
392 		.num_channels = 9,
393 		.oversampling_avail = ad7606_oversampling_avail,
394 		.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
395 	},
396 	[ID_AD7616] = {
397 		.channels = ad7616_channels,
398 		.num_channels = 17,
399 		.oversampling_avail = ad7616_oversampling_avail,
400 		.oversampling_num = ARRAY_SIZE(ad7616_oversampling_avail),
401 		.os_req_reset = true,
402 		.init_delay_ms = 15,
403 	},
404 };
405 
406 static int ad7606_request_gpios(struct ad7606_state *st)
407 {
408 	struct device *dev = st->dev;
409 
410 	st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start",
411 					 GPIOD_OUT_LOW);
412 	if (IS_ERR(st->gpio_convst))
413 		return PTR_ERR(st->gpio_convst);
414 
415 	st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
416 	if (IS_ERR(st->gpio_reset))
417 		return PTR_ERR(st->gpio_reset);
418 
419 	st->gpio_range = devm_gpiod_get_optional(dev, "adi,range",
420 						 GPIOD_OUT_LOW);
421 	if (IS_ERR(st->gpio_range))
422 		return PTR_ERR(st->gpio_range);
423 
424 	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
425 						   GPIOD_OUT_LOW);
426 	if (IS_ERR(st->gpio_standby))
427 		return PTR_ERR(st->gpio_standby);
428 
429 	st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data",
430 						    GPIOD_IN);
431 	if (IS_ERR(st->gpio_frstdata))
432 		return PTR_ERR(st->gpio_frstdata);
433 
434 	if (!st->chip_info->oversampling_num)
435 		return 0;
436 
437 	st->gpio_os = devm_gpiod_get_array_optional(dev,
438 						    "adi,oversampling-ratio",
439 						    GPIOD_OUT_LOW);
440 	return PTR_ERR_OR_ZERO(st->gpio_os);
441 }
442 
443 /*
444  * The BUSY signal indicates when conversions are in progress, so when a rising
445  * edge of CONVST is applied, BUSY goes logic high and transitions low at the
446  * end of the entire conversion process. The falling edge of the BUSY signal
447  * triggers this interrupt.
448  */
449 static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
450 {
451 	struct iio_dev *indio_dev = dev_id;
452 	struct ad7606_state *st = iio_priv(indio_dev);
453 
454 	if (iio_buffer_enabled(indio_dev)) {
455 		gpiod_set_value(st->gpio_convst, 0);
456 		iio_trigger_poll_nested(st->trig);
457 	} else {
458 		complete(&st->completion);
459 	}
460 
461 	return IRQ_HANDLED;
462 };
463 
464 static int ad7606_validate_trigger(struct iio_dev *indio_dev,
465 				   struct iio_trigger *trig)
466 {
467 	struct ad7606_state *st = iio_priv(indio_dev);
468 
469 	if (st->trig != trig)
470 		return -EINVAL;
471 
472 	return 0;
473 }
474 
475 static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
476 {
477 	struct ad7606_state *st = iio_priv(indio_dev);
478 
479 	gpiod_set_value(st->gpio_convst, 1);
480 
481 	return 0;
482 }
483 
484 static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
485 {
486 	struct ad7606_state *st = iio_priv(indio_dev);
487 
488 	gpiod_set_value(st->gpio_convst, 0);
489 
490 	return 0;
491 }
492 
493 static const struct iio_buffer_setup_ops ad7606_buffer_ops = {
494 	.postenable = &ad7606_buffer_postenable,
495 	.predisable = &ad7606_buffer_predisable,
496 };
497 
498 static const struct iio_info ad7606_info_no_os_or_range = {
499 	.read_raw = &ad7606_read_raw,
500 	.validate_trigger = &ad7606_validate_trigger,
501 };
502 
503 static const struct iio_info ad7606_info_os_and_range = {
504 	.read_raw = &ad7606_read_raw,
505 	.write_raw = &ad7606_write_raw,
506 	.attrs = &ad7606_attribute_group_os_and_range,
507 	.validate_trigger = &ad7606_validate_trigger,
508 };
509 
510 static const struct iio_info ad7606_info_os_range_and_debug = {
511 	.read_raw = &ad7606_read_raw,
512 	.write_raw = &ad7606_write_raw,
513 	.debugfs_reg_access = &ad7606_reg_access,
514 	.attrs = &ad7606_attribute_group_os_and_range,
515 	.validate_trigger = &ad7606_validate_trigger,
516 };
517 
518 static const struct iio_info ad7606_info_os = {
519 	.read_raw = &ad7606_read_raw,
520 	.write_raw = &ad7606_write_raw,
521 	.attrs = &ad7606_attribute_group_os,
522 	.validate_trigger = &ad7606_validate_trigger,
523 };
524 
525 static const struct iio_info ad7606_info_range = {
526 	.read_raw = &ad7606_read_raw,
527 	.write_raw = &ad7606_write_raw,
528 	.attrs = &ad7606_attribute_group_range,
529 	.validate_trigger = &ad7606_validate_trigger,
530 };
531 
532 static const struct iio_trigger_ops ad7606_trigger_ops = {
533 	.validate_device = iio_trigger_validate_own_device,
534 };
535 
536 int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
537 		 const char *name, unsigned int id,
538 		 const struct ad7606_bus_ops *bops)
539 {
540 	struct ad7606_state *st;
541 	int ret;
542 	struct iio_dev *indio_dev;
543 
544 	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
545 	if (!indio_dev)
546 		return -ENOMEM;
547 
548 	st = iio_priv(indio_dev);
549 	dev_set_drvdata(dev, indio_dev);
550 
551 	st->dev = dev;
552 	mutex_init(&st->lock);
553 	st->bops = bops;
554 	st->base_address = base_address;
555 	/* tied to logic low, analog input range is +/- 5V */
556 	st->range[0] = 0;
557 	st->oversampling = 1;
558 	st->scale_avail = ad7606_scale_avail;
559 	st->num_scales = ARRAY_SIZE(ad7606_scale_avail);
560 
561 	ret = devm_regulator_get_enable(dev, "avcc");
562 	if (ret)
563 		return dev_err_probe(dev, ret,
564 				     "Failed to enable specified AVcc supply\n");
565 
566 	st->chip_info = &ad7606_chip_info_tbl[id];
567 
568 	if (st->chip_info->oversampling_num) {
569 		st->oversampling_avail = st->chip_info->oversampling_avail;
570 		st->num_os_ratios = st->chip_info->oversampling_num;
571 	}
572 
573 	ret = ad7606_request_gpios(st);
574 	if (ret)
575 		return ret;
576 
577 	if (st->gpio_os) {
578 		if (st->gpio_range)
579 			indio_dev->info = &ad7606_info_os_and_range;
580 		else
581 			indio_dev->info = &ad7606_info_os;
582 	} else {
583 		if (st->gpio_range)
584 			indio_dev->info = &ad7606_info_range;
585 		else
586 			indio_dev->info = &ad7606_info_no_os_or_range;
587 	}
588 	indio_dev->modes = INDIO_DIRECT_MODE;
589 	indio_dev->name = name;
590 	indio_dev->channels = st->chip_info->channels;
591 	indio_dev->num_channels = st->chip_info->num_channels;
592 
593 	init_completion(&st->completion);
594 
595 	ret = ad7606_reset(st);
596 	if (ret)
597 		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
598 
599 	/* AD7616 requires al least 15ms to reconfigure after a reset */
600 	if (st->chip_info->init_delay_ms) {
601 		if (msleep_interruptible(st->chip_info->init_delay_ms))
602 			return -ERESTARTSYS;
603 	}
604 
605 	st->write_scale = ad7606_write_scale_hw;
606 	st->write_os = ad7606_write_os_hw;
607 
608 	if (st->bops->sw_mode_config)
609 		st->sw_mode_en = device_property_present(st->dev,
610 							 "adi,sw-mode");
611 
612 	if (st->sw_mode_en) {
613 		/* Scale of 0.076293 is only available in sw mode */
614 		st->scale_avail = ad7616_sw_scale_avail;
615 		st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
616 
617 		/* After reset, in software mode, ±10 V is set by default */
618 		memset32(st->range, 2, ARRAY_SIZE(st->range));
619 		indio_dev->info = &ad7606_info_os_range_and_debug;
620 
621 		ret = st->bops->sw_mode_config(indio_dev);
622 		if (ret < 0)
623 			return ret;
624 	}
625 
626 	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
627 					  indio_dev->name,
628 					  iio_device_id(indio_dev));
629 	if (!st->trig)
630 		return -ENOMEM;
631 
632 	st->trig->ops = &ad7606_trigger_ops;
633 	iio_trigger_set_drvdata(st->trig, indio_dev);
634 	ret = devm_iio_trigger_register(dev, st->trig);
635 	if (ret)
636 		return ret;
637 
638 	indio_dev->trig = iio_trigger_get(st->trig);
639 
640 	ret = devm_request_threaded_irq(dev, irq,
641 					NULL,
642 					&ad7606_interrupt,
643 					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
644 					name, indio_dev);
645 	if (ret)
646 		return ret;
647 
648 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
649 					      &iio_pollfunc_store_time,
650 					      &ad7606_trigger_handler,
651 					      &ad7606_buffer_ops);
652 	if (ret)
653 		return ret;
654 
655 	return devm_iio_device_register(dev, indio_dev);
656 }
657 EXPORT_SYMBOL_NS_GPL(ad7606_probe, IIO_AD7606);
658 
659 #ifdef CONFIG_PM_SLEEP
660 
661 static int ad7606_suspend(struct device *dev)
662 {
663 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
664 	struct ad7606_state *st = iio_priv(indio_dev);
665 
666 	if (st->gpio_standby) {
667 		gpiod_set_value(st->gpio_range, 1);
668 		gpiod_set_value(st->gpio_standby, 1);
669 	}
670 
671 	return 0;
672 }
673 
674 static int ad7606_resume(struct device *dev)
675 {
676 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
677 	struct ad7606_state *st = iio_priv(indio_dev);
678 
679 	if (st->gpio_standby) {
680 		gpiod_set_value(st->gpio_range, st->range[0]);
681 		gpiod_set_value(st->gpio_standby, 1);
682 		ad7606_reset(st);
683 	}
684 
685 	return 0;
686 }
687 
688 SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
689 EXPORT_SYMBOL_NS_GPL(ad7606_pm_ops, IIO_AD7606);
690 
691 #endif
692 
693 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
694 MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
695 MODULE_LICENSE("GPL v2");
696