1# 2# ADC drivers 3# 4# When adding new entries keep the list in alphabetical order 5 6menu "Analog to digital converters" 7 8config AD_SIGMA_DELTA 9 tristate 10 select IIO_BUFFER 11 select IIO_TRIGGERED_BUFFER 12 13config AD7266 14 tristate "Analog Devices AD7265/AD7266 ADC driver" 15 depends on SPI_MASTER 16 select IIO_BUFFER 17 select IIO_TRIGGER 18 select IIO_TRIGGERED_BUFFER 19 help 20 Say yes here to build support for Analog Devices AD7265 and AD7266 21 ADCs. 22 23 To compile this driver as a module, choose M here: the module will be 24 called ad7266. 25 26config AD7291 27 tristate "Analog Devices AD7291 ADC driver" 28 depends on I2C 29 help 30 Say yes here to build support for Analog Devices AD7291 31 8 Channel ADC with temperature sensor. 32 33 To compile this driver as a module, choose M here: the 34 module will be called ad7291. 35 36config AD7298 37 tristate "Analog Devices AD7298 ADC driver" 38 depends on SPI 39 select IIO_BUFFER 40 select IIO_TRIGGERED_BUFFER 41 help 42 Say yes here to build support for Analog Devices AD7298 43 8 Channel ADC with temperature sensor. 44 45 To compile this driver as a module, choose M here: the 46 module will be called ad7298. 47 48config AD7476 49 tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" 50 depends on SPI 51 select IIO_BUFFER 52 select IIO_TRIGGERED_BUFFER 53 help 54 Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, 55 AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, 56 AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). 57 58 To compile this driver as a module, choose M here: the 59 module will be called ad7476. 60 61config AD7766 62 tristate "Analog Devices AD7766/AD7767 ADC driver" 63 depends on SPI_MASTER 64 select IIO_BUFFER 65 select IIO_TRIGGERED_BUFFER 66 help 67 Say yes here to build support for Analog Devices AD7766, AD7766-1, 68 AD7766-2, AD7767, AD7767-1, AD7767-2 SPI analog to digital converters. 69 70 To compile this driver as a module, choose M here: the module will be 71 called ad7766. 72 73config AD7791 74 tristate "Analog Devices AD7791 ADC driver" 75 depends on SPI 76 select AD_SIGMA_DELTA 77 help 78 Say yes here to build support for Analog Devices AD7787, AD7788, AD7789, 79 AD7790 and AD7791 SPI analog to digital converters (ADC). 80 81 To compile this driver as a module, choose M here: the module will be 82 called ad7791. 83 84config AD7793 85 tristate "Analog Devices AD7793 and similar ADCs driver" 86 depends on SPI 87 select AD_SIGMA_DELTA 88 help 89 Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, 90 AD7794 and AD7795 SPI analog to digital converters (ADC). 91 92 To compile this driver as a module, choose M here: the 93 module will be called AD7793. 94 95config AD7887 96 tristate "Analog Devices AD7887 ADC driver" 97 depends on SPI 98 select IIO_BUFFER 99 select IIO_TRIGGERED_BUFFER 100 help 101 Say yes here to build support for Analog Devices 102 AD7887 SPI analog to digital converter (ADC). 103 104 To compile this driver as a module, choose M here: the 105 module will be called ad7887. 106 107config AD7923 108 tristate "Analog Devices AD7923 and similar ADCs driver" 109 depends on SPI 110 select IIO_BUFFER 111 select IIO_TRIGGERED_BUFFER 112 help 113 Say yes here to build support for Analog Devices 114 AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. 115 116 To compile this driver as a module, choose M here: the 117 module will be called ad7923. 118 119config AD799X 120 tristate "Analog Devices AD799x ADC driver" 121 depends on I2C 122 select IIO_BUFFER 123 select IIO_TRIGGERED_BUFFER 124 help 125 Say yes here to build support for Analog Devices: 126 ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998 127 i2c analog to digital converters (ADC). Provides direct access 128 via sysfs. 129 130 To compile this driver as a module, choose M here: the module will be 131 called ad799x. 132 133config ASPEED_ADC 134 tristate "Aspeed ADC" 135 depends on ARCH_ASPEED || COMPILE_TEST 136 depends on COMMON_CLK 137 help 138 If you say yes here you get support for the ADC included in Aspeed 139 BMC SoCs. 140 141 To compile this driver as a module, choose M here: the module will be 142 called aspeed_adc. 143 144config AT91_ADC 145 tristate "Atmel AT91 ADC" 146 depends on ARCH_AT91 147 depends on INPUT 148 select IIO_BUFFER 149 select IIO_TRIGGERED_BUFFER 150 select SYSFS 151 help 152 Say yes here to build support for Atmel AT91 ADC. 153 154 To compile this driver as a module, choose M here: the module will be 155 called at91_adc. 156 157config AT91_SAMA5D2_ADC 158 tristate "Atmel AT91 SAMA5D2 ADC" 159 depends on ARCH_AT91 || COMPILE_TEST 160 depends on HAS_IOMEM 161 select IIO_TRIGGERED_BUFFER 162 help 163 Say yes here to build support for Atmel SAMA5D2 ADC which is 164 available on SAMA5D2 SoC family. 165 166 To compile this driver as a module, choose M here: the module will be 167 called at91-sama5d2_adc. 168 169config AXP20X_ADC 170 tristate "X-Powers AXP20X and AXP22X ADC driver" 171 depends on MFD_AXP20X 172 help 173 Say yes here to have support for X-Powers power management IC (PMIC) 174 AXP20X and AXP22X ADC devices. 175 176 To compile this driver as a module, choose M here: the module will be 177 called axp20x_adc. 178 179config AXP288_ADC 180 tristate "X-Powers AXP288 ADC driver" 181 depends on MFD_AXP20X 182 help 183 Say yes here to have support for X-Powers power management IC (PMIC) ADC 184 device. Depending on platform configuration, this general purpose ADC can 185 be used for sampling sensors such as thermal resistors. 186 187 To compile this driver as a module, choose M here: the module will be 188 called axp288_adc. 189 190config BCM_IPROC_ADC 191 tristate "Broadcom IPROC ADC driver" 192 depends on ARCH_BCM_IPROC || COMPILE_TEST 193 depends on MFD_SYSCON 194 default ARCH_BCM_CYGNUS 195 help 196 Say Y here if you want to add support for the Broadcom static 197 ADC driver. 198 199 Broadcom iProc ADC driver. Broadcom iProc ADC controller has 8 200 channels. The driver allows the user to read voltage values. 201 202config BERLIN2_ADC 203 tristate "Marvell Berlin2 ADC driver" 204 depends on ARCH_BERLIN 205 help 206 Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for 207 temperature measurement. 208 209config CC10001_ADC 210 tristate "Cosmic Circuits 10001 ADC driver" 211 depends on HAS_IOMEM && HAVE_CLK && REGULATOR 212 select IIO_BUFFER 213 select IIO_TRIGGERED_BUFFER 214 help 215 Say yes here to build support for Cosmic Circuits 10001 ADC. 216 217 This driver can also be built as a module. If so, the module will be 218 called cc10001_adc. 219 220config CPCAP_ADC 221 tristate "Motorola CPCAP PMIC ADC driver" 222 depends on MFD_CPCAP 223 select IIO_BUFFER 224 select IIO_TRIGGERED_BUFFER 225 help 226 Say yes here to build support for Motorola CPCAP PMIC ADC. 227 228 This driver can also be built as a module. If so, the module will be 229 called cpcap-adc. 230 231config DA9150_GPADC 232 tristate "Dialog DA9150 GPADC driver support" 233 depends on MFD_DA9150 234 help 235 Say yes here to build support for Dialog DA9150 GPADC. 236 237 This driver can also be built as a module. If chosen, the module name 238 will be da9150-gpadc. 239 240 To compile this driver as a module, choose M here: the module will be 241 called berlin2-adc. 242 243config DLN2_ADC 244 tristate "Diolan DLN-2 ADC driver support" 245 depends on MFD_DLN2 246 select IIO_BUFFER 247 select IIO_TRIGGERED_BUFFER 248 help 249 Say yes here to build support for Diolan DLN-2 ADC. 250 251 This driver can also be built as a module. If so, the module will be 252 called adc_dln2. 253 254config ENVELOPE_DETECTOR 255 tristate "Envelope detector using a DAC and a comparator" 256 depends on OF 257 help 258 Say yes here to build support for an envelope detector using a DAC 259 and a comparator. 260 261 To compile this driver as a module, choose M here: the module will be 262 called envelope-detector. 263 264config EP93XX_ADC 265 tristate "Cirrus Logic EP93XX ADC driver" 266 depends on ARCH_EP93XX 267 help 268 Driver for the ADC module on the EP93XX series of SoC from Cirrus Logic. 269 It's recommended to switch on CONFIG_HIGH_RES_TIMERS option, in this 270 case driver will reduce its CPU usage by 90% in some use cases. 271 272 To compile this driver as a module, choose M here: the module will be 273 called ep93xx_adc. 274 275config EXYNOS_ADC 276 tristate "Exynos ADC driver support" 277 depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST) 278 depends on HAS_IOMEM 279 help 280 Core support for the ADC block found in the Samsung EXYNOS series 281 of SoCs for drivers such as the touchscreen and hwmon to use to share 282 this resource. 283 284 To compile this driver as a module, choose M here: the module will be 285 called exynos_adc. 286 287config MXS_LRADC_ADC 288 tristate "Freescale i.MX23/i.MX28 LRADC ADC" 289 depends on MFD_MXS_LRADC 290 select IIO_BUFFER 291 select IIO_TRIGGERED_BUFFER 292 help 293 Say yes here to build support for the ADC functions of the 294 i.MX23/i.MX28 LRADC. This includes general-purpose ADC readings, 295 battery voltage measurement, and die temperature measurement. 296 297 This driver can also be built as a module. If so, the module will be 298 called mxs-lradc-adc. 299 300config FSL_MX25_ADC 301 tristate "Freescale MX25 ADC driver" 302 depends on MFD_MX25_TSADC 303 help 304 Generic Conversion Queue driver used for general purpose ADC in the 305 MX25. This driver supports single measurements using the MX25 ADC. 306 307config HI8435 308 tristate "Holt Integrated Circuits HI-8435 threshold detector" 309 select IIO_TRIGGERED_EVENT 310 depends on SPI 311 help 312 If you say yes here you get support for Holt Integrated Circuits 313 HI-8435 chip. 314 315 This driver can also be built as a module. If so, the module will be 316 called hi8435. 317 318config HX711 319 tristate "AVIA HX711 ADC for weight cells" 320 depends on GPIOLIB 321 help 322 If you say yes here you get support for AVIA HX711 ADC which is used 323 for weigh cells 324 325 This driver uses two GPIOs, one acts as the clock and controls the 326 channel selection and gain, the other one is used for the measurement 327 data 328 329 Currently the raw value is read from the chip and delivered. 330 To get an actual weight one needs to subtract the 331 zero offset and multiply by a scale factor. 332 This should be done in userspace. 333 334 This driver can also be built as a module. If so, the module will be 335 called hx711. 336 337config INA2XX_ADC 338 tristate "Texas Instruments INA2xx Power Monitors IIO driver" 339 depends on I2C && !SENSORS_INA2XX 340 select REGMAP_I2C 341 select IIO_BUFFER 342 select IIO_KFIFO_BUF 343 help 344 Say yes here to build support for TI INA2xx family of Power Monitors. 345 This driver is mutually exclusive with the HWMON version. 346 347config IMX7D_ADC 348 tristate "Freescale IMX7D ADC driver" 349 depends on ARCH_MXC || COMPILE_TEST 350 depends on HAS_IOMEM 351 help 352 Say yes here to build support for IMX7D ADC. 353 354 This driver can also be built as a module. If so, the module will be 355 called imx7d_adc. 356 357config LP8788_ADC 358 tristate "LP8788 ADC driver" 359 depends on MFD_LP8788 360 help 361 Say yes here to build support for TI LP8788 ADC. 362 363 To compile this driver as a module, choose M here: the module will be 364 called lp8788_adc. 365 366config LPC18XX_ADC 367 tristate "NXP LPC18xx ADC driver" 368 depends on ARCH_LPC18XX || COMPILE_TEST 369 depends on OF && HAS_IOMEM 370 help 371 Say yes here to build support for NXP LPC18XX ADC. 372 373 To compile this driver as a module, choose M here: the module will be 374 called lpc18xx_adc. 375 376config LPC32XX_ADC 377 tristate "NXP LPC32XX ADC" 378 depends on ARCH_LPC32XX || COMPILE_TEST 379 depends on HAS_IOMEM 380 help 381 Say yes here to build support for the integrated ADC inside the 382 LPC32XX SoC. Note that this feature uses the same hardware as the 383 touchscreen driver, so you should either select only one of the two 384 drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case, 385 activate only one via device tree selection. Provides direct access 386 via sysfs. 387 388config LTC2471 389 tristate "Linear Technology LTC2471 and LTC2473 ADC driver" 390 depends on I2C 391 help 392 Say yes here to build support for Linear Technology LTC2471 and 393 LTC2473 16-bit I2C ADC. 394 395 This driver can also be built as a module. If so, the module will 396 be called ltc2471. 397 398config LTC2485 399 tristate "Linear Technology LTC2485 ADC driver" 400 depends on I2C 401 help 402 Say yes here to build support for Linear Technology LTC2485 ADC. 403 404 To compile this driver as a module, choose M here: the module will be 405 called ltc2485. 406 407config LTC2497 408 tristate "Linear Technology LTC2497 ADC driver" 409 depends on I2C 410 help 411 Say yes here to build support for Linear Technology LTC2497 412 16-Bit 8-/16-Channel Delta Sigma ADC. 413 414 To compile this driver as a module, choose M here: the module will be 415 called ltc2497. 416 417config MAX1027 418 tristate "Maxim max1027 ADC driver" 419 depends on SPI 420 select IIO_BUFFER 421 select IIO_TRIGGERED_BUFFER 422 help 423 Say yes here to build support for Maxim SPI ADC models 424 max1027, max1029 and max1031. 425 426 To compile this driver as a module, choose M here: the module will be 427 called max1027. 428 429config MAX11100 430 tristate "Maxim max11100 ADC driver" 431 depends on SPI_MASTER 432 help 433 Say yes here to build support for Maxim max11100 SPI ADC 434 435 To compile this driver as a module, choose M here: the module will be 436 called max11100. 437 438config MAX1118 439 tristate "Maxim max1117/max1118/max1119 ADCs driver" 440 depends on SPI 441 select IIO_BUFFER 442 select IIO_TRIGGERED_BUFFER 443 help 444 Say yes here to build support for Maxim max1117/max1118/max1119 445 8-bit, dual-channel ADCs. 446 447 To compile this driver as a module, choose M here: the module will be 448 called max1118. 449 450config MAX1363 451 tristate "Maxim max1363 ADC driver" 452 depends on I2C 453 select IIO_BUFFER 454 select IIO_TRIGGERED_BUFFER 455 help 456 Say yes here to build support for many Maxim i2c analog to digital 457 converters (ADC). (max1361, max1362, max1363, max1364, max1036, 458 max1037, max1038, max1039, max1136, max1136, max1137, max1138, 459 max1139, max1236, max1237, max11238, max1239, max11600, max11601, 460 max11602, max11603, max11604, max11605, max11606, max11607, 461 max11608, max11609, max11610, max11611, max11612, max11613, 462 max11614, max11615, max11616, max11617, max11644, max11645, 463 max11646, max11647) Provides direct access via sysfs and buffered 464 data via the iio dev interface. 465 466 To compile this driver as a module, choose M here: the module will be 467 called max1363. 468 469config MAX9611 470 tristate "Maxim max9611/max9612 ADC driver" 471 depends on I2C 472 help 473 Say yes here to build support for Maxim max9611/max9612 current sense 474 amplifier with 12-bits ADC interface. 475 476 To compile this driver as a module, choose M here: the module will be 477 called max9611. 478 479config MCP320X 480 tristate "Microchip Technology MCP3x01/02/04/08 and MCP3550/1/3" 481 depends on SPI 482 help 483 Say yes here to build support for Microchip Technology's 484 MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204, 485 MCP3208, MCP3301, MCP3550, MCP3551 and MCP3553 analog to digital 486 converters. 487 488 This driver can also be built as a module. If so, the module will be 489 called mcp320x. 490 491config MCP3422 492 tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver" 493 depends on I2C 494 help 495 Say yes here to build support for Microchip Technology's MCP3421 496 MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428 497 analog to digital converters. 498 499 This driver can also be built as a module. If so, the module will be 500 called mcp3422. 501 502config MEDIATEK_MT6577_AUXADC 503 tristate "MediaTek AUXADC driver" 504 depends on ARCH_MEDIATEK || COMPILE_TEST 505 depends on HAS_IOMEM 506 help 507 Say yes here to enable support for MediaTek mt65xx AUXADC. 508 509 The driver supports immediate mode operation to read from one of sixteen 510 channels (external or internal). 511 512 This driver can also be built as a module. If so, the module will be 513 called mt6577_auxadc. 514 515config MEN_Z188_ADC 516 tristate "MEN 16z188 ADC IP Core support" 517 depends on MCB 518 help 519 Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB 520 carrier. 521 522 This driver can also be built as a module. If so, the module will be 523 called men_z188_adc. 524 525config MESON_SARADC 526 tristate "Amlogic Meson SAR ADC driver" 527 default ARCH_MESON 528 depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) 529 select REGMAP_MMIO 530 help 531 Say yes here to build support for the SAR ADC found in Amlogic Meson 532 SoCs. 533 534 To compile this driver as a module, choose M here: the 535 module will be called meson_saradc. 536 537config NAU7802 538 tristate "Nuvoton NAU7802 ADC driver" 539 depends on I2C 540 help 541 Say yes here to build support for Nuvoton NAU7802 ADC. 542 543 To compile this driver as a module, choose M here: the 544 module will be called nau7802. 545 546config PALMAS_GPADC 547 tristate "TI Palmas General Purpose ADC" 548 depends on MFD_PALMAS 549 help 550 Palmas series pmic chip by Texas Instruments (twl6035/6037) 551 is used in smartphones and tablets and supports a 16 channel 552 general purpose ADC. 553 554config QCOM_VADC_COMMON 555 tristate 556 557config QCOM_PM8XXX_XOADC 558 tristate "Qualcomm SSBI PM8xxx PMIC XOADCs" 559 depends on MFD_PM8XXX 560 select QCOM_VADC_COMMON 561 help 562 ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs 563 using SSBI transport: PM8018, PM8038, PM8058, PM8921. 564 565 To compile this driver as a module, choose M here: the module 566 will be called qcom-pm8xxx-xoadc. 567 568config QCOM_SPMI_IADC 569 tristate "Qualcomm SPMI PMIC current ADC" 570 depends on SPMI 571 select REGMAP_SPMI 572 help 573 This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip. 574 575 The driver supports single mode operation to read from one of two 576 channels (external or internal). Hardware have additional 577 channels internally used for gain and offset calibration. 578 579 To compile this driver as a module, choose M here: the module will 580 be called qcom-spmi-iadc. 581 582config QCOM_SPMI_VADC 583 tristate "Qualcomm SPMI PMIC voltage ADC" 584 depends on SPMI 585 select REGMAP_SPMI 586 select QCOM_VADC_COMMON 587 help 588 This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip. 589 590 The driver supports multiple channels read. The VADC is a 15-bit 591 sigma-delta ADC. Some of the channels are internally used for 592 calibration. 593 594 To compile this driver as a module, choose M here: the module will 595 be called qcom-spmi-vadc. 596 597config RCAR_GYRO_ADC 598 tristate "Renesas R-Car GyroADC driver" 599 depends on ARCH_RCAR_GEN2 || COMPILE_TEST 600 help 601 Say yes here to build support for the GyroADC found in Renesas 602 R-Car Gen2 SoCs. This block is a simple SPI offload engine for 603 reading data out of attached compatible ADCs in a round-robin 604 fashion. Up to 4 or 8 ADC channels are supported by this block, 605 depending on which ADCs are attached. 606 607 To compile this driver as a module, choose M here: the 608 module will be called rcar-gyroadc. 609 610config ROCKCHIP_SARADC 611 tristate "Rockchip SARADC driver" 612 depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST) 613 depends on RESET_CONTROLLER 614 help 615 Say yes here to build support for the SARADC found in SoCs from 616 Rockchip. 617 618 To compile this driver as a module, choose M here: the 619 module will be called rockchip_saradc. 620 621config SPEAR_ADC 622 tristate "ST SPEAr ADC" 623 depends on PLAT_SPEAR || COMPILE_TEST 624 depends on HAS_IOMEM 625 help 626 Say yes here to build support for the integrated ADC inside the 627 ST SPEAr SoC. Provides direct access via sysfs. 628 629 To compile this driver as a module, choose M here: the 630 module will be called spear_adc. 631 632config STM32_ADC_CORE 633 tristate "STMicroelectronics STM32 adc core" 634 depends on ARCH_STM32 || COMPILE_TEST 635 depends on HAS_DMA 636 depends on OF 637 depends on REGULATOR 638 select IIO_BUFFER 639 select MFD_STM32_TIMERS 640 select IIO_STM32_TIMER_TRIGGER 641 select IIO_TRIGGERED_BUFFER 642 help 643 Select this option to enable the core driver for STMicroelectronics 644 STM32 analog-to-digital converter (ADC). 645 646 This driver can also be built as a module. If so, the module 647 will be called stm32-adc-core. 648 649config STM32_ADC 650 tristate "STMicroelectronics STM32 adc" 651 depends on STM32_ADC_CORE 652 help 653 Say yes here to build support for STMicroelectronics stm32 Analog 654 to Digital Converter (ADC). 655 656 This driver can also be built as a module. If so, the module 657 will be called stm32-adc. 658 659config STX104 660 tristate "Apex Embedded Systems STX104 driver" 661 depends on PC104 && X86 && ISA_BUS_API 662 select GPIOLIB 663 help 664 Say yes here to build support for the Apex Embedded Systems STX104 665 integrated analog PC/104 card. 666 667 This driver supports the 16 channels of single-ended (8 channels of 668 differential) analog inputs, 2 channels of analog output, 4 digital 669 inputs, and 4 digital outputs provided by the STX104. 670 671 The base port addresses for the devices may be configured via the base 672 array module parameter. 673 674config SUN4I_GPADC 675 tristate "Support for the Allwinner SoCs GPADC" 676 depends on IIO 677 depends on MFD_SUN4I_GPADC || MACH_SUN8I 678 depends on THERMAL || !THERMAL_OF 679 help 680 Say yes here to build support for Allwinner (A10, A13 and A31) SoCs 681 GPADC. This ADC provides 4 channels which can be used as an ADC or as 682 a touchscreen input and one channel for thermal sensor. 683 684 The thermal sensor slows down ADC readings and can be disabled by 685 disabling CONFIG_THERMAL_OF. However, the thermal sensor should be 686 enabled by default since the SoC temperature is usually more critical 687 than ADC readings. 688 689 To compile this driver as a module, choose M here: the module will be 690 called sun4i-gpadc-iio. 691 692config TI_ADC081C 693 tristate "Texas Instruments ADC081C/ADC101C/ADC121C family" 694 depends on I2C 695 select IIO_BUFFER 696 select IIO_TRIGGERED_BUFFER 697 help 698 If you say yes here you get support for Texas Instruments ADC081C, 699 ADC101C and ADC121C ADC chips. 700 701 This driver can also be built as a module. If so, the module will be 702 called ti-adc081c. 703 704config TI_ADC0832 705 tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838" 706 depends on SPI 707 select IIO_BUFFER 708 select IIO_TRIGGERED_BUFFER 709 help 710 If you say yes here you get support for Texas Instruments ADC0831, 711 ADC0832, ADC0834, ADC0838 ADC chips. 712 713 This driver can also be built as a module. If so, the module will be 714 called ti-adc0832. 715 716config TI_ADC084S021 717 tristate "Texas Instruments ADC084S021" 718 depends on SPI 719 select IIO_BUFFER 720 select IIO_TRIGGERED_BUFFER 721 help 722 If you say yes here you get support for Texas Instruments ADC084S021 723 chips. 724 725 This driver can also be built as a module. If so, the module will be 726 called ti-adc084s021. 727 728config TI_ADC12138 729 tristate "Texas Instruments ADC12130/ADC12132/ADC12138" 730 depends on SPI 731 select IIO_BUFFER 732 select IIO_TRIGGERED_BUFFER 733 help 734 If you say yes here you get support for Texas Instruments ADC12130, 735 ADC12132 and ADC12138 chips. 736 737 This driver can also be built as a module. If so, the module will be 738 called ti-adc12138. 739 740config TI_ADC108S102 741 tristate "Texas Instruments ADC108S102 and ADC128S102 driver" 742 depends on SPI 743 select IIO_BUFFER 744 select IIO_TRIGGERED_BUFFER 745 help 746 Say yes here to build support for Texas Instruments ADC108S102 and 747 ADC128S102 ADC. 748 749 To compile this driver as a module, choose M here: the module will 750 be called ti-adc108s102. 751 752config TI_ADC128S052 753 tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" 754 depends on SPI 755 help 756 If you say yes here you get support for Texas Instruments ADC128S052, 757 ADC122S021 and ADC124S021 chips. 758 759 This driver can also be built as a module. If so, the module will be 760 called ti-adc128s052. 761 762config TI_ADC161S626 763 tristate "Texas Instruments ADC161S626 1-channel differential ADC" 764 depends on SPI 765 select IIO_BUFFER 766 select IIO_TRIGGERED_BUFFER 767 help 768 If you say yes here you get support for Texas Instruments ADC141S626, 769 and ADC161S626 chips. 770 771 This driver can also be built as a module. If so, the module will be 772 called ti-adc161s626. 773 774config TI_ADS1015 775 tristate "Texas Instruments ADS1015 ADC" 776 depends on I2C && !SENSORS_ADS1015 777 select REGMAP_I2C 778 select IIO_BUFFER 779 select IIO_TRIGGERED_BUFFER 780 help 781 If you say yes here you get support for Texas Instruments ADS1015 782 ADC chip. 783 784 This driver can also be built as a module. If so, the module will be 785 called ti-ads1015. 786 787config TI_ADS7950 788 tristate "Texas Instruments ADS7950 ADC driver" 789 depends on SPI 790 select IIO_BUFFER 791 select IIO_TRIGGERED_BUFFER 792 help 793 Say yes here to build support for Texas Instruments ADS7950, ADS7951, 794 ADS7952, ADS7953, ADS7954, ADS7955, ADS7956, ADS7957, ADS7958, ADS7959. 795 ADS7960, ADS7961. 796 797 To compile this driver as a module, choose M here: the 798 module will be called ti-ads7950. 799 800config TI_ADS8688 801 tristate "Texas Instruments ADS8688" 802 depends on SPI && OF 803 help 804 If you say yes here you get support for Texas Instruments ADS8684 and 805 and ADS8688 ADC chips 806 807 This driver can also be built as a module. If so, the module will be 808 called ti-ads8688. 809 810config TI_AM335X_ADC 811 tristate "TI's AM335X ADC driver" 812 depends on MFD_TI_AM335X_TSCADC && HAS_DMA 813 select IIO_BUFFER 814 select IIO_KFIFO_BUF 815 help 816 Say yes here to build support for Texas Instruments ADC 817 driver which is also a MFD client. 818 819 To compile this driver as a module, choose M here: the module will be 820 called ti_am335x_adc. 821 822config TI_TLC4541 823 tristate "Texas Instruments TLC4541 ADC driver" 824 depends on SPI 825 select IIO_BUFFER 826 select IIO_TRIGGERED_BUFFER 827 help 828 Say yes here to build support for Texas Instruments TLC4541 / TLC3541 829 ADC chips. 830 831 This driver can also be built as a module. If so, the module will be 832 called ti-tlc4541. 833 834config TWL4030_MADC 835 tristate "TWL4030 MADC (Monitoring A/D Converter)" 836 depends on TWL4030_CORE 837 help 838 This driver provides support for Triton TWL4030-MADC. The 839 driver supports both RT and SW conversion methods. 840 841 This driver can also be built as a module. If so, the module will be 842 called twl4030-madc. 843 844config TWL6030_GPADC 845 tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" 846 depends on TWL4030_CORE 847 default n 848 help 849 Say yes here if you want support for the TWL6030/TWL6032 General 850 Purpose A/D Converter. This will add support for battery type 851 detection, battery voltage and temperature measurement, die 852 temperature measurement, system supply voltage, audio accessory, 853 USB ID detection. 854 855 This driver can also be built as a module. If so, the module will be 856 called twl6030-gpadc. 857 858config VF610_ADC 859 tristate "Freescale vf610 ADC driver" 860 depends on OF 861 depends on HAS_IOMEM 862 select IIO_BUFFER 863 select IIO_TRIGGERED_BUFFER 864 help 865 Say yes here to support for Vybrid board analog-to-digital converter. 866 Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX. 867 868 This driver can also be built as a module. If so, the module will be 869 called vf610_adc. 870 871config VIPERBOARD_ADC 872 tristate "Viperboard ADC support" 873 depends on MFD_VIPERBOARD && USB 874 help 875 Say yes here to access the ADC part of the Nano River 876 Technologies Viperboard. 877 878 To compile this driver as a module, choose M here: the module will be 879 called viperboard_adc. 880 881config XILINX_XADC 882 tristate "Xilinx XADC driver" 883 depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST 884 depends on HAS_IOMEM 885 select IIO_BUFFER 886 select IIO_TRIGGERED_BUFFER 887 help 888 Say yes here to have support for the Xilinx XADC. The driver does support 889 both the ZYNQ interface to the XADC as well as the AXI-XADC interface. 890 891 The driver can also be build as a module. If so, the module will be called 892 xilinx-xadc. 893 894endmenu 895